def handle_msg(self, msg_pmt):
msg = pmt.cdr(msg_pmt)
if not pmt.is_u8vector(msg):
print("[ERROR] Received invalid message type. Expected u8vector")
return
syms = np.array(pmt.u8vector_elements(msg), dtype='uint8')
decodable_blocks = int(len(syms)/self.SYMS_PER_BLOCK)
if decodable_blocks < self.total_num_blocks:
# can't decode a partial block or a set of too few blocks
print("[WARNING] Insufficient number of blocks provided; %d given but need %d for %d bytes" %
(decodable_blocks, self.total_num_blocks, self.msg_size))
return
num_blocks = min(decodable_blocks, self.total_num_blocks)
byts = np.zeros(self.BYTES_PER_BLOCK*num_blocks, dtype=np.uint8)
for block in range(num_blocks):
byts_i = block*self.BYTES_PER_BLOCK
syms_i = block*self.SYMS_PER_BLOCK
byts[byts_i:byts_i+self.BYTES_PER_BLOCK] = self.decode_block(syms[syms_i:syms_i+self.SYMS_PER_BLOCK])
# ignore first few bytes of first block as these contain packet metadata
# cut off the rest to the requested length
byts_arr = array.array('B', byts[self.HEADER_BLOCK_BYTES:self.HEADER_BLOCK_BYTES + self.msg_size])
if self.print_packets:
print(self._bytearr_to_string(byts_arr))
self.message_port_pub(pmt.intern('out'), pmt.cons(pmt.get_PMT_NIL(), pmt.init_u8vector(len(byts_arr), byts_arr)))
self.num_packets += 1
def handle_msg(self, msg_pmt):
meta = pmt.car(msg_pmt)
msg = pmt.cdr(msg_pmt)
if not pmt.is_u8vector(msg):
print "[ERROR] Received invalid message type. Expected u8vector"
return
raw_vec = pmt.dict_ref(meta, pmt.intern("raw"), pmt.get_PMT_NIL())
if raw_vec != pmt.get_PMT_NIL() and pmt.is_u8vector(raw_vec):
raw = equisat_telemetry_parser.bytes_to_hex_str(
pmt.u8vector_elements(raw_vec))
else:
print "[WARNING] No raw field provided in PDU; not publishing raw transmission"
raw = None
corrected = equisat_telemetry_parser.bytes_to_hex_str(
pmt.u8vector_elements(msg))
self.submit_packet(raw, corrected)
time.sleep(self.MIN_REQUEST_PERIOD)
def send_taps(self, fft_size):
self.fft_size = fft_size
self.taps_set = True
taps = self.tap_equation(fft_size)
taps_fi = self.gen_fixed_filter(taps, fft_size)
taps_vec = self.gen_tap_vec(taps_fi, fft_size)
data_rfnoc = pmt.init_s32vector(len(taps_vec), taps_vec.tolist())
msg = pmt.cons(pmt.get_PMT_NIL(), data_rfnoc)
# print(msg)
self.message_port_pub(pmt.intern('to_rfnoc'), msg)
print("done sending")
def send(self): # , input_items, output_items):
#output_items[0][:] = input_items[0]
# consume(0, len(input_items[0]))
# print "sent flag = %d" % self.sent_flag
if self.sent_flag == 0:
start_time = 315964800
epoch_length = 7200
code_length = 12288
key = [0x54, 0x65, 0x17, 0x98, 0x13, 0x65, 0x34, 0x87, 0x087, 0x14,
0x57, 0x81, 0x30, 0x13, 0x20, 0x23, 0x13, 0x13,
0x05, 0x43, 0x40, 0x54, 0x34, 0x67, 0x89, 0x14,
0x54, 0x18, 0x94, 0x10, 0x35, 0x00]
key = "".join([chr(item) for item in key])
current_time = 1452709080
# current_time = 0
# current_time = 1461629066 #time.time()
adjusted_time = current_time - start_time
adjusted_time = adjusted_time - (adjusted_time % epoch_length)
print "adjusted time = {}".format(adjusted_time)
pt = numpy.zeros(code_length/8, dtype=numpy.uint8)
pt = "".join([chr(item) for item in pt])
ctr = Counter.new(128, initial_value=adjusted_time)
cipher = AES.new(key, AES.MODE_CTR, counter=ctr)
ct = cipher.encrypt(pt)
cipher_stream = numpy.uint8([ord(item) for item in ct])
spreading = numpy.zeros(code_length/8, dtype=numpy.uint8)
for index in range(0, len(cipher_stream)):
temp = numpy.binary_repr(cipher_stream[index], width=8)
spreading[index] = int(temp[::-1], 2)
spreading = numpy.fliplr(spreading.reshape(code_length/8/16, 16))
spreading = spreading.reshape(code_length/8)
spreading = numpy.fliplr(spreading.reshape(code_length/8/4, 4))
data = spreading.reshape(code_length/8).view("uint32")
#pmt_seq = pmt.make_u32vector(len(data), 0)
#for i, val in enumerate(data):
# pmt.u32vector_set(pmt_seq, i, 0xffffffff) #True) # val)
#self.message_port_pub(pmt.intern("scramb_seq"), pmt_seq)
#print data
print "1 %s" % type(data[0])
data_len = len(data)
data_pmt = pmt.to_pmt(data)
#print data_pmt
data = pmt.u32vector_elements(pmt.to_pmt(data))
#print data
# print type(data)
data = pmt.init_u32vector(data_len, data)
#print data_len
#print data
meta = pmt.get_PMT_NIL()
# msg = pmt.cons(meta, data)
# print data
self.message_port_pub(self.msg_buf_out, pmt.cons(meta, data))
# print "sent message"
time.sleep(5)
self.sent_flag = 1
def general_work(self, input_items, output_items):
""" Called by GNU Radio with input stream """
# NOTE: input_items always includes self.NUM_OLD_DATA "old" bytes
# we've already read, plus possibly more if we didn't consume them,
# but the rest are new (see set_history above)
inpt = input_items[0]
new_inpt = inpt[self.HISTORY_LEN:]
# finite state machine for different sections of packet
if self.state is self.ST_WAIT_FOR_PREAMBLE:
# if searching, check for start of preamble in the HISTORY and
# set up for start of packet if found
found, start, end, high, low = self.check_for_preamble(inpt, self.min_preamble_len, self.max_symbol_ratio)
# if we found a preamble sequence, but it took the whole buffer
# (i.e. the last preamble sequence was within one sequence of the end)
# defer and try again next time in case there's more
# otherwise, continue
if found and end < len(inpt)-4:
# setup packet state
self.high = high
self.low = low
# consume the component of the preamble that we haven't already (the part not in the history)
# note that end should always be greater than or equal to the history otherwise we would've done
# this already, but check that it's greater than zero anyways
new_preamble_len = max(0, end - self.HISTORY_LEN)
self.consume(0, new_preamble_len)
# now, try and start reading the frame sync
self.state = self.ST_IN_FRAME_SYNC
else:
# if no preamble was found, consume all the data (if there was a partial preamble,
# it will end up in the history)
self.consume(0, len(new_inpt)) # TODO: setting this to len(inpt) instead makes this block actually terminate
return 0
elif self.state == self.ST_IN_FRAME_SYNC:
# check if the new data is enough to complete the frame sync
if len(new_inpt) >= self.FRAME_SYNC_LEN:
# move onto blocks, starting past end of frame sync
self.state = self.ST_IN_BLOCKS
# consume the frame sync
self.consume(0, self.FRAME_SYNC_LEN)
return 0
elif self.state == self.ST_IN_BLOCKS:
# copy the input into a buffer to transmit later, not consuming data that overflows that buffer
blocks_buf_rem = len(self.blocks_buf) - self.blocks_buf_i
transferred = min(blocks_buf_rem, len(new_inpt))
self.blocks_buf[self.blocks_buf_i:self.blocks_buf_i+transferred] = new_inpt[:transferred]
self.blocks_buf_i += transferred
self.consume(0, transferred)
if self.blocks_buf_i >= len(self.blocks_buf): # should only equal
# now that we have a full buffer, convert to symbols
syms = self.get_symbols(self.blocks_buf, high=self.high, low=self.low, sym_seperation_thresh=self.SYM_SEPERATION_THRESH)
# send message with symbols and reset state
syms_arr = array.array('B', syms)
self.message_port_pub(pmt.intern('out'),
pmt.cons(pmt.get_PMT_NIL(), pmt.init_u8vector(len(syms_arr), syms_arr)))
self.reset_state()
return 0
else: # revert
assert False
def general_work(self, input_items, output_items):
""" Called by GNU Radio with input stream """
# NOTE: input_items always includes self.NUM_OLD_DATA "old" bytes
# we've already read, plus possibly more if we didn't consume them,
# but the rest are new (see set_history above)
inpt = input_items[0]
new_inpt = inpt[self.HISTORY_LEN:]
# finite state machine for different sections of packet
if self.state is self.ST_WAIT_FOR_PREAMBLE:
# if searching, check for start of preamble in the HISTORY and
# set up for start of packet if found
found, start, end, high, low = self.check_for_preamble(
inpt, self.min_preamble_len, self.max_symbol_ratio)
if found and end >= len(inpt) - 4:
# if we found a preamble sequence, but it took the whole buffer
# (i.e. the last preamble sequence was within one sequence of the end)
# defer and try again next time in case there's more
# (we're guaranteed to find it again and will likely have more data after it)
return 0
elif found:
# otherwise, continue:
# setup packet state
self.high = high
self.low = low
# consume the component of the preamble that we haven't already (the part not in the history)
# note that end should almost always be greater than or equal to the history (otherwise we would've done
# this already), unless we're just coming from a frame sync search which happened to consume part of a preamble
new_preamble_len = max(0, end - self.HISTORY_LEN)
self.consume_each(new_preamble_len)
# now, try and start reading the frame sync
self.state = self.ST_FRAME_SYNC_SEARCH
else:
# if no preamble was found, consume all the data (if there was a partial preamble,
# it will end up in the history)
self.consume_each(
len(new_inpt)
) # TODO: setting this to len(inpt) instead makes this block actually terminate
return 0
elif self.state == self.ST_FRAME_SYNC_SEARCH:
# convert to symbols for speed
new_inpt_syms = self.get_symbols(new_inpt, self.high, self.low)
# search from the last search start to the end of the new input
for i in range(self.frame_sync_searched,
len(new_inpt) - self.FRAME_SYNC_LEN):
cur_buf = new_inpt_syms[i:i + self.FRAME_SYNC_LEN]
# look for the most accurate section of frame sync before we have to stop searching
# (wait until we're done searching otherwise we'll just take the first choice over the threshold)
percent_correct = np.sum(
cur_buf == self.FRAME_SYNC_SYMS) / float(
self.FRAME_SYNC_LEN)
if percent_correct >= self.best_frame_sync_match: # emphasize later ones
self.best_frame_sync_match = percent_correct
self.best_frame_sync_index = self.frame_sync_searched
elif self.frame_sync_searched > self.max_frame_sync_searched:
# check percent match threshold once we've exhausted the search space
if self.best_frame_sync_match > self.MIN_FRAME_SYNC_MATCH:
self.state = self.ST_IN_BLOCKS
self.consume_each(self.best_frame_sync_index +
self.FRAME_SYNC_LEN - 1)
else:
self.reset_state()
self.consume_each(self.frame_sync_searched - 1)
return 0
self.frame_sync_searched += 1
return 0
elif self.state == self.ST_IN_BLOCKS:
# copy the input into a buffer to transmit later, not consuming data that overflows that buffer
blocks_buf_rem = len(self.blocks_buf) - self.blocks_buf_i
transferred = min(blocks_buf_rem, len(new_inpt))
self.blocks_buf[self.blocks_buf_i:self.blocks_buf_i +
transferred] = new_inpt[:transferred]
self.blocks_buf_i += transferred
self.consume_each(transferred)
if self.blocks_buf_i >= len(self.blocks_buf): # should only equal
# now that we have a full buffer, convert to symbols
syms = self.get_symbols(
self.blocks_buf,
high=self.high,
low=self.low,
sym_seperation_thresh=self.SYM_SEPERATION_THRESH)
# send message with symbols and reset state
syms_arr = array.array('B', syms)
self.message_port_pub(
pmt.intern('out'),
pmt.cons(pmt.get_PMT_NIL(),
pmt.init_u8vector(len(syms_arr), syms_arr)))
self.reset_state()
return 0
else: # revert
assert False
def decode_worker(dec_queue, stopping):
try:
while not stopping.value:
try:
# block until next demod is in
next_demod = dec_queue.get(timeout=QUEUE_EMPTY_POLL_PERIOD)
except Queue.Empty:
# check for stopped condition if queue empty after timeout
continue
except KeyboardInterrupt:
return
try:
wavfilename = next_demod["wavfilename"]
sample_rate, duration, nframes = DecoderQueue.get_audio_info(wavfilename)
# spawn the GNU radio flowgraph and run it
tb = equisat_fm_demod(wavfile=wavfilename, sample_rate=sample_rate)
logger.debug("[%s] Starting demod flowgraph" % wavfilename)
tb.start()
# run until the wav source block has completed
# (GNU Radio has a bug such that flowgraphs with Python message passing blocks won't terminate)
# (see https://github.com/gnuradio/gnuradio/pull/797, https://www.ruby-forum.com/t/run-to-completion-not-working-with-message-passing-blocks/240759)
start = time.time()
while tb.blocks_wavfile_source_0.nitems_written(0) < nframes \
and (time.time() - start) < MAX_FLOWGRAPH_RUNTIME:
time.sleep(FLOWGRAPH_POLL_PERIOD_S)
if tb.blocks_wavfile_source_0.nitems_written(0) < nframes:
logger.warn("[%s] Flowgraph timed out (%d/%d frames)" % \
(wavfilename, tb.blocks_wavfile_source_0.nitems_written(0), nframes))
logger.debug("[%s] Stopping demod flowgraph" % wavfilename)
tb.stop()
tb.wait()
logger.debug("[%s] Demod flowgraph terminated" % wavfilename)
# we have a block to store both all valid raw packets and one to store
# all those that passed error correction (which includes the corresponding raw)
raw_packets = []
corrected_packets = []
for i in range(tb.message_store_block_raw.num_messages()):
msg = tb.message_store_block_raw.get_message(i)
raw_packets.append(binascii.hexlify(bytearray(pmt.u8vector_elements(pmt.cdr(msg)))))
for i in range(tb.message_store_block_corrected.num_messages()):
msg = tb.message_store_block_corrected.get_message(i)
corrected = pmt.u8vector_elements(pmt.cdr(msg))
raw = pmt.u8vector_elements(pmt.dict_ref(pmt.car(msg), pmt.intern("raw"), pmt.get_PMT_NIL()))
decoded, decode_errs = packetparse.parse_packet(binascii.hexlify(bytearray(corrected)))
corrected_packets.append({
"raw": binascii.hexlify(bytearray(raw)),
"corrected": binascii.hexlify(bytearray(corrected)),
"parsed": decoded,
"decode_errs": decode_errs
})
onfinish = next_demod["onfinish"]
onfinish(wavfilename, {
"raw_packets": raw_packets,
"corrected_packets": corrected_packets,
}, next_demod["args"], None)
except KeyboardInterrupt:
return
except Exception as ex:
logger.error("Exception in decoder worker, skipping job")
logger.exception(ex)
onfinish = next_demod["onfinish"]
onfinish(next_demod["wavfilename"], {
"raw_packets": [],
"corrected_packets": [],
}, next_demod["args"], ex.message)
finally:
print("Stopping decoder worker")