def __init__(self, f = None, size = (600, 600), build_dimensions = [200, 200, 100, 0, 0, 0], grid = (10, 50), extrusion_width = 0.5, bgcolor = "#000000"):
super(GvizWindow, self).__init__(None, title = _("Gcode view, shift to move view, mousewheel to set layer"), size = size)
panel, vbox = self.create_base_ui()
self.p = Gviz(panel, size = size, build_dimensions = build_dimensions, grid = grid, extrusion_width = extrusion_width, bgcolor = bgcolor, realparent = self)
self.toolbar.AddSeparator()
#self.toolbar.AddSimpleTool(6, wx.Image(imagefile('inject.png'), wx.BITMAP_TYPE_PNG).ConvertToBitmap(), _("Insert Code at start of this layer"), '')
self.toolbar.Realize()
vbox.Add(self.p, 1, wx.EXPAND)
self.SetMinSize(self.ClientToWindowSize(vbox.GetMinSize()))
self.Bind(wx.EVT_TOOL, lambda x: self.p.zoom(-1, -1, 1.2), id = 1)
self.Bind(wx.EVT_TOOL, lambda x: self.p.zoom(-1, -1, 1 / 1.2), id = 2)
self.Bind(wx.EVT_TOOL, lambda x: self.p.layerup(), id = 3)
self.Bind(wx.EVT_TOOL, lambda x: self.p.layerdown(), id = 4)
self.Bind(wx.EVT_TOOL, self.resetview, id = 5)
#self.Bind(wx.EVT_TOOL, lambda x:self.p.inject(), id = 6)
self.initpos = None
self.p.Bind(wx.EVT_KEY_DOWN, self.key)
self.Bind(wx.EVT_KEY_DOWN, self.key)
self.p.Bind(wx.EVT_MOUSEWHEEL, self.zoom)
self.Bind(wx.EVT_MOUSEWHEEL, self.zoom)
self.p.Bind(wx.EVT_MOUSE_EVENTS, self.mouse)
self.Bind(wx.EVT_MOUSE_EVENTS, self.mouse)
if f:
gcode = gcoder.GCode(f, get_home_pos(self.p.build_dimensions))
self.p.addfile(gcode)
def clear(self):
self.lastpos = [0, 0, 0, 0, 0, 0, 0]
self.hilightpos = self.lastpos[:]
self.gcoder = gcoder.GCode([], get_home_pos(self.build_dimensions))
self.lines = {}
self.pens = {}
self.arcs = {}
self.arcpens = {}
self.layers = []
self.clearhilights()
self.layerindex = 0
self.showall = 0
self.dirty = 1
wx.CallAfter(self.Refresh)
def clear(self):
self.lastpos = [0, 0, 0, 0, 0, 0, 0]
self.hilightpos = self.lastpos[:]
self.gcoder = gcoder.GCode([], get_home_pos(self.build_dimensions))
self.lines = {}
self.pens = {}
self.arcs = {}
self.arcpens = {}
self.layers = []
self.clearhilights()
self.layerindex = 0
self.showall = 0
self.dirty = 1
wx.CallAfter(self.Refresh)
def __init__(self,
f=None,
size=(600, 600),
build_dimensions=[200, 200, 100, 0, 0, 0],
grid=(10, 50),
extrusion_width=0.5,
bgcolor="#000000"):
super(GvizWindow, self).__init__(
None,
title=_("Gcode view, shift to move view, mousewheel to set layer"),
size=size)
panel, vbox = self.create_base_ui()
self.p = Gviz(panel,
size=size,
build_dimensions=build_dimensions,
grid=grid,
extrusion_width=extrusion_width,
bgcolor=bgcolor,
realparent=self)
self.toolbar.AddSeparator()
#self.toolbar.AddSimpleTool(6, wx.Image(imagefile('inject.png'), wx.BITMAP_TYPE_PNG).ConvertToBitmap(), _("Insert Code at start of this layer"), '')
self.toolbar.Realize()
vbox.Add(self.p, 1, wx.EXPAND)
self.SetMinSize(self.ClientToWindowSize(vbox.GetMinSize()))
self.Bind(wx.EVT_TOOL, lambda x: self.p.zoom(-1, -1, 1.2), id=1)
self.Bind(wx.EVT_TOOL, lambda x: self.p.zoom(-1, -1, 1 / 1.2), id=2)
self.Bind(wx.EVT_TOOL, lambda x: self.p.layerup(), id=3)
self.Bind(wx.EVT_TOOL, lambda x: self.p.layerdown(), id=4)
self.Bind(wx.EVT_TOOL, self.resetview, id=5)
#self.Bind(wx.EVT_TOOL, lambda x:self.p.inject(), id = 6)
self.initpos = None
self.p.Bind(wx.EVT_KEY_DOWN, self.key)
self.Bind(wx.EVT_KEY_DOWN, self.key)
self.p.Bind(wx.EVT_MOUSEWHEEL, self.zoom)
self.Bind(wx.EVT_MOUSEWHEEL, self.zoom)
self.p.Bind(wx.EVT_MOUSE_EVENTS, self.mouse)
self.Bind(wx.EVT_MOUSE_EVENTS, self.mouse)
if f:
gcode = gcoder.GCode(f, get_home_pos(self.p.build_dimensions))
self.p.addfile(gcode)
self.layerslider.SetValue(self.model.max_layers + 1)
wx.CallAfter(self.Refresh)
def clear(self):
self.model = None
self.objects[-1].model = None
wx.CallAfter(self.Refresh)
if __name__ == "__main__":
import sys
app = wx.App(redirect = False)
build_dimensions = [200, 200, 100, 0, 0, 0]
title = 'Gcode view, shift to move view, mousewheel to set layer'
frame = GcodeViewFrame(None, wx.ID_ANY, title, size = (400, 400),
build_dimensions = build_dimensions)
gcode = gcoder.GCode(open(sys.argv[1]), get_home_pos(build_dimensions))
frame.addfile(gcode)
first_move = None
for i in range(len(gcode.lines)):
if gcode.lines[i].is_move:
first_move = gcode.lines[i]
break
last_move = None
for i in range(len(gcode.lines) - 1, -1, -1):
if gcode.lines[i].is_move:
last_move = gcode.lines[i]
break
nsteps = 20
steptime = 500
lines = [first_move] + [gcode.lines[int(float(i) * (len(gcode.lines) - 1) / nsteps)] for i in range(1, nsteps)] + [last_move]
self.layerslider.SetValue(self.model.max_layers + 1)
wx.CallAfter(self.Refresh)
def clear(self):
self.model = None
self.objects[-1].model = None
wx.CallAfter(self.Refresh)
if __name__ == "__main__":
import sys
app = wx.App(redirect = False)
build_dimensions = [200, 200, 100, 0, 0, 0]
title = 'Gcode view, shift to move view, mousewheel to set layer'
frame = GcodeViewFrame(None, wx.ID_ANY, title, size = (400, 400),
build_dimensions = build_dimensions)
gcode = gcoder.GCode(open(sys.argv[1]), get_home_pos(build_dimensions))
frame.addfile(gcode)
first_move = None
for i in range(len(gcode.lines)):
if gcode.lines[i].is_move:
first_move = gcode.lines[i]
break
last_move = None
for i in range(len(gcode.lines) - 1, -1, -1):
if gcode.lines[i].is_move:
last_move = gcode.lines[i]
break
nsteps = 20
steptime = 500
lines = [first_move] + [gcode.lines[int(float(i) * (len(gcode.lines) - 1) / nsteps)] for i in range(1, nsteps)] + [last_move]