def defineCharacteristics(self):
self.name = "las2txt"
self.group = "LAStools"
self.addParametersVerboseGUI()
self.addParametersPointInputGUI()
self.addParameter(ParameterString(las2txt.PARSE_STRING, "parse_string", "xyz"))
self.addOutput(OutputFile(las2txt.OUTPUT, "Output ASCII file"))
def defineCharacteristics(self):
self.name = 'Stream Drop Analysis'
self.cmdName = 'dropanalysis'
self.group = 'Stream Network Analysis tools'
self.addParameter(ParameterRaster(self.D8_CONTRIB_AREA_GRID,
'D8 Contributing Area Grid', False))
self.addParameter(ParameterRaster(self.D8_FLOW_DIR_GRID,
'D8 Flow Direction Grid', False))
self.addParameter(ParameterRaster(self.PIT_FILLED_GRID,
'Pit Filled Elevation Grid', False))
self.addParameter(ParameterRaster(self.ACCUM_STREAM_SOURCE_GRID,
'Contributing Area Grid', False))
self.addParameter(ParameterVector(self.OUTLETS_SHAPE,
'Outlets Shapefile',
[ParameterVector.VECTOR_TYPE_POINT], False))
self.addParameter(ParameterNumber(self.MIN_TRESHOLD,
'Minimum Threshold', 0, None, 5))
self.addParameter(ParameterNumber(self.MAX_THRESHOLD,
'Maximum Threshold', 0, None, 500))
self.addParameter(ParameterNumber(self.TRESHOLD_NUM,
'Number of Threshold Values', 0, None, 10))
self.addParameter(ParameterSelection(self.STEP_TYPE,
'Spacing for Threshold Values', self.STEPS, 0))
self.addOutput(OutputFile(self.DROP_ANALYSIS_FILE,
'D-Infinity Drop to Stream Grid'))
def defineCharacteristics(self):
self.name = "lasclip"
self.group = "Tools"
self.addParameter(ParameterFile(lasclip.INPUT, "Input las layer"))
self.addParameter(ParameterVector(lasclip.POLYGON, "Input polygons", [ParameterVector.VECTOR_TYPE_POLYGON]))
self.addOutput(OutputFile(lasclip.OUTPUT, "Output classified las file"))
self.addCommonParameters()
def defineCharacteristics(self):
self.name = "lasclassify"
self.group = "Tools"
self.addParameter(ParameterFile(lasclassify.INPUT, "Input las layer"))
self.addOutput(
OutputFile(lasclassify.OUTPUT, "Output classified las file"))
self.addCommonParameters()
def defineCharacteristics(self):
self.name = "Ground Filter"
self.group = "Points"
self.addParameter(ParameterFile(self.INPUT, "Input las layer"))
self.addParameter(ParameterNumber(self.CELLSIZE, "Cellsize for intermediate surfaces", 0, None, 10))
self.addOutput(OutputFile(self.OUTPUT, "Output ground las file"))
self.addAdvancedModifiers()
def defineCharacteristics(self):
self.name = "Distance matrix"
self.group = "Vector analysis tools"
self.addParameter(
ParameterVector(self.INPUT_LAYER, "Input point layer",
[ParameterVector.VECTOR_TYPE_POINT]))
self.addParameter(
ParameterTableField(self.INPUT_FIELD, "Input unique ID field",
self.INPUT_LAYER,
ParameterTableField.DATA_TYPE_ANY))
self.addParameter(
ParameterVector(self.TARGET_LAYER, "Target point layer",
ParameterVector.VECTOR_TYPE_POINT))
self.addParameter(
ParameterTableField(self.TARGET_FIELD, "Target unique ID field",
self.TARGET_LAYER,
ParameterTableField.DATA_TYPE_ANY))
self.addParameter(
ParameterSelection(self.MATRIX_TYPE, "Output matrix type",
self.MAT_TYPES, 0))
self.addParameter(
ParameterNumber(self.NEAREST_POINTS,
"Use only the nearest (k) target points", 0, 9999,
0))
self.addOutput(OutputFile(self.DISTANCE_MATRIX, "Distance matrix"))
def defineCharacteristics(self):
self.name = "lasground"
self.group = "Tools"
self.addParameter(ParameterFile(lasground.INPUT, "Input las layer"))
self.addParameter(
ParameterSelection(lasground.METHOD, "Method", lasground.METHODS))
self.addOutput(OutputFile(lasground.OUTPUT, "Output ground las file"))
self.addCommonParameters()
def defineCharacteristics(self):
self.name = "las2shp"
self.group = "LAStools"
self.addParametersVerboseGUI()
self.addParametersPointInputGUI()
self.addParameter(ParameterBoolean(las2shp.POINT_Z, "use PointZ instead of MultiPointZ", False))
self.addParameter(ParameterNumber(las2shp.RECORD_SIZE, "number of points per record", 0, None, 1024))
self.addOutput(OutputFile(las2shp.OUTPUT, "Output SHP file"))
def defineCharacteristics(self):
self.name = "Clip Data"
self.group = "Points"
self.addParameter(ParameterFile(self.INPUT, "Input las layer"))
self.addParameter(ParameterExtent(self.EXTENT, "Extent"))
self.addParameter(ParameterSelection(self.SHAPE, "Shape", ["Rectangle","Circle"]))
self.addOutput(OutputFile(self.OUTPUT, "Output clipped las file"))
self.addAdvancedModifiers()
def defineCharacteristics(self):
self.name = "Filter Data outliers"
self.group = "Points"
self.addParameter(ParameterFile(self.INPUT, "Input las layer"))
self.addParameter(ParameterNumber(self.VALUE, "Standard Deviation multiplier"))
self.addParameter(ParameterNumber(self.VALUE, "Window size", None, None, 10))
self.addOutput(OutputFile(self.OUTPUT, "Output filtered las file"))
self.addAdvancedModifiers()
def defineCharacteristics(self):
self.name = 'las2txt'
self.group = 'LAStools'
self.addParametersVerboseGUI()
self.addParametersPointInputGUI()
self.addParameter(ParameterString(las2txt.PARSE_STRING, 'parse_string'
, 'xyz'))
self.addOutput(OutputFile(las2txt.OUTPUT, 'Output ASCII file'))
def defineCharacteristics(self):
self.name = 'Ground Filter'
self.group = 'Points'
self.addParameter(ParameterFile(self.INPUT, 'Input las layer'))
self.addParameter(ParameterNumber(self.CELLSIZE,
'Cellsize for intermediate surfaces', 0, None, 10))
self.addOutput(OutputFile(self.OUTPUT, 'Output ground las file'))
self.addAdvancedModifiers()
def defineCharacteristics(self):
self.name = 'Clip Data'
self.group = 'Points'
self.addParameter(ParameterFile(self.INPUT, 'Input las layer'))
self.addParameter(ParameterExtent(self.EXTENT, 'Extent'))
self.addParameter(
ParameterSelection(self.SHAPE, 'Shape', ['Rectangle', 'Circle']))
self.addOutput(OutputFile(self.OUTPUT, 'Output clipped las file'))
self.addAdvancedModifiers()
def defineCharacteristics(self):
self.name = "Create Grid Surface"
self.group = "Surface"
self.addParameter(ParameterFile(self.INPUT, "Input las layer"))
self.addParameter(ParameterNumber(self.CELLSIZE, "Cellsize", 0, None, 10.0))
self.addParameter(ParameterSelection(self.XYUNITS, "XY Units", self.UNITS))
self.addParameter(ParameterSelection(self.ZUNITS, "Z Units", self.UNITS))
self.addOutput(OutputFile(self.OUTPUT, "PLANS DTM surface"))
self.addAdvancedModifiers()
def defineCharacteristics(self):
self.name = "lassplit"
self.group = "Tools"
self.addParameter(ParameterFile(lassplit.INPUT, "Input las layer"))
self.addParameter(
ParameterNumber(lassplit.NUM_POINTS, "Point in each output file",
1, None, 1000000))
self.addOutput(OutputFile(lassplit.OUTPUT, "Output las file basename"))
self.addCommonParameters()
def defineCharacteristics(self):
self.name = 'Filter Data outliers'
self.group = 'Points'
self.addParameter(ParameterFile(self.INPUT, 'Input las layer'))
self.addParameter(
ParameterNumber(self.VALUE, 'Standard Deviation multiplier'))
self.addParameter(
ParameterNumber(self.VALUE, 'Window size', None, None, 10))
self.addOutput(OutputFile(self.OUTPUT, 'Output filtered las file'))
self.addAdvancedModifiers()
def defineCharacteristics(self):
self.name = 'Create Grid Surface'
self.group = 'Surface'
self.addParameter(ParameterFile(self.INPUT, 'Input las layer'))
self.addParameter(
ParameterNumber(self.CELLSIZE, 'Cellsize', 0, None, 10.0))
self.addParameter(
ParameterSelection(self.XYUNITS, 'XY Units', self.UNITS))
self.addParameter(
ParameterSelection(self.ZUNITS, 'Z Units', self.UNITS))
self.addOutput(OutputFile(self.OUTPUT, 'PLANS DTM surface'))
self.addAdvancedModifiers()
def defineCharacteristics(self):
self.name = 'las2shp'
self.group = 'LAStools'
self.addParametersVerboseGUI()
self.addParametersPointInputGUI()
self.addParameter(
ParameterBoolean(las2shp.POINT_Z,
'use PointZ instead of MultiPointZ', False))
self.addParameter(
ParameterNumber(las2shp.RECORD_SIZE, 'number of points per record',
0, None, 1024))
self.addOutput(OutputFile(las2shp.OUTPUT, 'Output SHP file'))
def processParameterLine(self, line):
param = None
out = None
line = line.replace('#', '')
# If the line is in the format of the text description files for
# normal algorithms, then process it using parameter and output
# factories
if '|' in line:
self.processDescriptionParameterLine(line)
return
if line == "nomodeler":
self.showInModeler = False
tokens = line.split('=', 1)
desc = self.createDescriptiveName(tokens[0])
if tokens[1].lower().strip() == 'group':
self.group = tokens[0]
return
if tokens[1].lower().strip() == 'name':
self.name = tokens[0]
return
if tokens[1].lower().strip() == 'raster':
param = ParameterRaster(tokens[0], desc, False)
elif tokens[1].lower().strip() == 'vector':
param = ParameterVector(tokens[0], desc,
[ParameterVector.VECTOR_TYPE_ANY])
elif tokens[1].lower().strip() == 'vector point':
param = ParameterVector(tokens[0], desc,
[ParameterVector.VECTOR_TYPE_POINT])
elif tokens[1].lower().strip() == 'vector line':
param = ParameterVector(tokens[0], desc,
[ParameterVector.VECTOR_TYPE_LINE])
elif tokens[1].lower().strip() == 'vector polygon':
param = ParameterVector(tokens[0], desc,
[ParameterVector.VECTOR_TYPE_POLYGON])
elif tokens[1].lower().strip() == 'table':
param = ParameterTable(tokens[0], desc, False)
elif tokens[1].lower().strip() == 'multiple raster':
param = ParameterMultipleInput(tokens[0], desc,
ParameterMultipleInput.TYPE_RASTER)
param.optional = False
elif tokens[1].lower().strip() == 'multiple vector':
param = ParameterMultipleInput(
tokens[0], desc, ParameterMultipleInput.TYPE_VECTOR_ANY)
param.optional = False
elif tokens[1].lower().strip().startswith('selection'):
options = tokens[1].strip()[len('selection '):].split(';')
param = ParameterSelection(tokens[0], desc, options)
elif tokens[1].lower().strip().startswith('boolean'):
default = tokens[1].strip()[len('boolean') + 1:]
param = ParameterBoolean(tokens[0], desc, default)
elif tokens[1].lower().strip() == 'extent':
param = ParameterExtent(tokens[0], desc)
elif tokens[1].lower().strip() == 'file':
param = ParameterFile(tokens[0], desc, False)
elif tokens[1].lower().strip() == 'folder':
param = ParameterFile(tokens[0], desc, True)
elif tokens[1].lower().strip().startswith('number'):
default = tokens[1].strip()[len('number') + 1:]
param = ParameterNumber(tokens[0], desc, default=default)
elif tokens[1].lower().strip().startswith('field'):
field = tokens[1].strip()[len('field') + 1:]
found = False
for p in self.parameters:
if p.name == field:
found = True
break
if found:
param = ParameterTableField(tokens[0], desc, field)
elif tokens[1].lower().strip().startswith('string'):
default = tokens[1].strip()[len('string') + 1:]
param = ParameterString(tokens[0], desc, default)
elif tokens[1].lower().strip().startswith('longstring'):
default = tokens[1].strip()[len('longstring') + 1:]
param = ParameterString(tokens[0], desc, default, multiline=True)
elif tokens[1].lower().strip().startswith('crs'):
default = tokens[1].strip()[len('crs') + 1:]
if not default:
default = 'EPSG:4326'
param = ParameterCrs(tokens[0], desc, default)
elif tokens[1].lower().strip().startswith('output raster'):
out = OutputRaster()
elif tokens[1].lower().strip().startswith('output vector'):
out = OutputVector()
elif tokens[1].lower().strip().startswith('output table'):
out = OutputTable()
elif tokens[1].lower().strip().startswith('output html'):
out = OutputHTML()
elif tokens[1].lower().strip().startswith('output file'):
out = OutputFile()
subtokens = tokens[1].split(' ')
if len(subtokens > 2):
out.ext = subtokens[2]
elif tokens[1].lower().strip().startswith('output directory'):
out = OutputDirectory()
elif tokens[1].lower().strip().startswith('output number'):
out = OutputNumber()
elif tokens[1].lower().strip().startswith('output string'):
out = OutputString()
if param is not None:
self.addParameter(param)
elif out is not None:
out.name = tokens[0]
out.description = desc
self.addOutput(out)
else:
raise WrongScriptException(
'Could not load script:' + self.descriptionFile
or '' + '.\n Problem with line "' + line + '"')
def defineCharacteristics(self):
self.name = 'lasvalidate'
self.group = 'LAStools'
self.addParametersVerboseGUI()
self.addParametersPointInputGUI()
self.addOutput(OutputFile(lasvalidate.OUTPUT, 'Output XML file'))
def defineCharacteristics(self):
self.name = 'Merge LAS Files'
self.group = 'Points'
self.addParameter(ParameterFile(self.INPUT, 'Input LAS files'))
self.addOutput(OutputFile(self.OUTPUT, 'Output merged LAS file'))
def addParametersPointOutputDirectoryGUI(self):
self.addOutput(OutputFile(LAStoolsAlgorithm.OUTPUT_DIRECTORY,
'Output directory'))
def processParameterLine(self, line):
param = None
out = None
line = line.replace('#', '')
if line.lower().strip().startswith('report'):
self.report = True
self.addOutput(OutputHTML(RAlgorithm.KNITR_REPORT, 'HTML Report'))
return
if line.lower().strip().startswith('showplots'):
self.showPlots = True
self.addOutput(OutputHTML(RAlgorithm.RPLOTS, 'R Plots'))
return
if line.lower().strip().startswith('dontuserasterpackage'):
self.useRasterPackage = False
return
if line.lower().strip().startswith('passfilenames'):
self.passFileNames = True
return
if line.lower().strip().startswith('shapefilespackage'):
self.useShapefilesPackage = True
return
tokens = line.split('=')
desc = self.createDescriptiveName(tokens[0])
if tokens[1].lower().strip() == 'group':
self.group = tokens[0]
return
if tokens[1].lower().strip().startswith('raster'):
param = ParameterRaster(tokens[0], desc, False)
elif tokens[1].lower().strip() == 'vector':
param = ParameterVector(tokens[0], desc,
[ParameterVector.VECTOR_TYPE_ANY])
elif tokens[1].lower().strip() == 'table':
param = ParameterTable(tokens[0], desc, False)
elif tokens[1].lower().strip().startswith('multiple raster'):
param = ParameterMultipleInput(tokens[0], desc,
ParameterMultipleInput.TYPE_RASTER)
param.optional = False
elif tokens[1].lower().strip() == 'multiple vector':
param = ParameterMultipleInput(tokens[0], desc,
ParameterMultipleInput.TYPE_VECTOR_ANY)
param.optional = False
elif tokens[1].lower().strip().startswith('selection'):
options = tokens[1].strip()[len('selection'):].split(';')
param = ParameterSelection(tokens[0], desc, options)
elif tokens[1].lower().strip().startswith('boolean'):
default = tokens[1].strip()[len('boolean') + 1:]
param = ParameterBoolean(tokens[0], desc, default)
elif tokens[1].lower().strip().startswith('number'):
try:
default = float(tokens[1].strip()[len('number') + 1:])
param = ParameterNumber(tokens[0], desc, default=default)
except:
raise WrongScriptException('Could not load R script:'
+ self.descriptionFile + '.\n Problem with line "'
+ line + '"')
elif tokens[1].lower().strip().startswith('field'):
field = tokens[1].strip()[len('field') + 1:]
found = False
for p in self.parameters:
if p.name == field:
found = True
break
if found:
param = ParameterTableField(tokens[0], desc, field)
elif tokens[1].lower().strip() == 'extent':
param = ParameterExtent(tokens[0], desc)
elif tokens[1].lower().strip() == 'file':
param = ParameterFile(tokens[0], desc, False)
elif tokens[1].lower().strip() == 'folder':
param = ParameterFile(tokens[0], desc, True)
elif tokens[1].lower().strip().startswith('string'):
default = tokens[1].strip()[len('string') + 1:]
param = ParameterString(tokens[0], desc, default)
elif tokens[1].lower().strip().startswith('output raster'):
out = OutputRaster()
elif tokens[1].lower().strip().startswith('output vector'):
out = OutputVector()
elif tokens[1].lower().strip().startswith('output table'):
out = OutputTable()
elif tokens[1].lower().strip().startswith('output file'):
out = OutputFile()
elif tokens[1].lower().strip().startswith('output string'):
out = OutputString()
self.outputStringExist = True
self.outputStringName = tokens[0]
elif tokens[1].lower().strip().startswith('output number'):
out = OutputNumber()
self.outputNumberBool = True
self.outputNumberName = tokens[0]
if param is not None:
self.addParameter(param)
elif out is not None:
out.name = tokens[0]
out.description = tokens[0]
self.addOutput(out)
else:
raise WrongScriptException('Could not load R script:'
+ self.descriptionFile
+ '.\n Problem with line "' + line + '"'
)
def defineCharacteristics(self):
self.name = 'lasinfo'
self.group = 'LAStools'
self.addParametersVerboseGUI()
self.addParametersPointInputGUI()
self.addOutput(OutputFile(lasinfo.OUTPUT, 'Output ASCII file'))
def addParametersPointOutputFormatGUI(self):
self.addOutput(OutputFile(LAStoolsAlgorithm.OUTPUT_POINT_FORMAT,
'Output format'))
def addParametersPointOutputAppendixGUI(self):
self.addOutput(OutputFile(LAStoolsAlgorithm.OUTPUT_APPENDIX,
'Output appendix'))
def defineCharacteristics(self):
self.name = "Merge LAS Files"
self.group = "Points"
self.addParameter(ParameterFile(self.INPUT, "Input LAS files"))
self.addOutput(OutputFile(self.OUTPUT, "Output merged LAS file"))
def defineCharacteristics(self):
self.name = "lasinfo"
self.group = "LAStools"
self.addParametersVerboseGUI()
self.addParametersPointInputGUI()
self.addOutput(OutputFile(lasinfo.OUTPUT, "Output ASCII file"))
def processParameterLine(self, line):
param = None
out = None
line = line.replace("#", "")
if line.lower().strip().startswith("showplots"):
self.showPlots = True
self.addOutput(OutputHTML(RAlgorithm.RPLOTS, "R Plots"))
return
if line.lower().strip().startswith("dontuserasterpackage"):
self.useRasterPackage = False
return
if line.lower().strip().startswith("passfilenames"):
self.passFileNames = True
return
tokens = line.split("=")
desc = self.createDescriptiveName(tokens[0])
if tokens[1].lower().strip() == "group":
self.group = tokens[0]
return
if tokens[1].lower().strip().startswith("raster"):
param = ParameterRaster(tokens[0], desc, False)
elif tokens[1].lower().strip() == "vector":
param = ParameterVector(tokens[0], desc,
[ParameterVector.VECTOR_TYPE_ANY])
elif tokens[1].lower().strip() == "table":
param = ParameterTable(tokens[0], desc, False)
elif tokens[1].lower().strip().startswith("multiple raster"):
param = ParameterMultipleInput(tokens[0], desc,
ParameterMultipleInput.TYPE_RASTER)
param.optional = False
elif tokens[1].lower().strip() == "multiple vector":
param = ParameterMultipleInput(
tokens[0], desc, ParameterMultipleInput.TYPE_VECTOR_ANY)
param.optional = False
elif tokens[1].lower().strip().startswith("selection"):
options = tokens[1].strip()[len("selection"):].split(";")
param = ParameterSelection(tokens[0], desc, options)
elif tokens[1].lower().strip().startswith("boolean"):
default = tokens[1].strip()[len("boolean") + 1:]
param = ParameterBoolean(tokens[0], desc, default)
elif tokens[1].lower().strip().startswith("number"):
try:
default = float(tokens[1].strip()[len("number") + 1:])
param = ParameterNumber(tokens[0], desc, default=default)
except:
raise WrongScriptException("Could not load R script:" +
self.descriptionFile +
".\n Problem with line \"" + line +
"\"")
elif tokens[1].lower().strip().startswith("field"):
field = tokens[1].strip()[len("field") + 1:]
found = False
for p in self.parameters:
if p.name == field:
found = True
break
if found:
param = ParameterTableField(tokens[0], tokens[0], field)
elif tokens[1].lower().strip() == "extent":
param = ParameterExtent(tokens[0], desc)
elif tokens[1].lower().strip() == "file":
param = ParameterFile(tokens[0], desc, False)
elif tokens[1].lower().strip() == "folder":
param = ParameterFile(tokens[0], desc, True)
elif tokens[1].lower().strip().startswith("string"):
default = tokens[1].strip()[len("string") + 1:]
param = ParameterString(tokens[0], desc, default)
elif tokens[1].lower().strip().startswith("output raster"):
out = OutputRaster()
elif tokens[1].lower().strip().startswith("output vector"):
out = OutputVector()
elif tokens[1].lower().strip().startswith("output table"):
out = OutputTable()
elif tokens[1].lower().strip().startswith("output file"):
out = OutputFile()
if param != None:
self.addParameter(param)
elif out != None:
out.name = tokens[0]
out.description = tokens[0]
self.addOutput(out)
else:
raise WrongScriptException("Could not load R script:" +
self.descriptionFile +
".\n Problem with line \"" + line +
"\"")
def addParametersPointOutputFileGUI(self):
self.addOutput(OutputFile(LAStoolsAlgorithm.OUTPUT_LASLAZ,
'Output LAS/LAZ file'))