def qft(a = 11, param = "draw"):
# Initialisation
if param == "draw":
drawing_engine = CircuitDrawer()
eng = MainEngine(drawing_engine)
else:
eng = MainEngine()
[La, n] = int2bit(a)
xa = eng.allocate_qureg(n)
# initialisation de a et b
for i in range(n):
if La[i]:
X | xa[i]
# On passe de a a phi(a) : QTF
eng.flush()
QFT | xa
eng.flush()
if param != "draw":
amp_xa = []
for i in range(1 << n):
phase_reel = phase(eng.backend.get_amplitude(adapt_binary(bin(i), n), xa)) / (2 * math.pi)
amp_xa.append(Fraction(phase_reel).limit_denominator(10))
print(amp_xa)
All(Measure) | xa
eng.flush()
if param == "draw":
print(drawing_engine.get_latex())
def draw_algorithm(algorithm, num_qubits=None, name="test"):
"""
Draw circuit of corresponding algorithm.
algorithm: list of strs, gate sequence.
num_qubits: int, number of qubits for algorithm. Can be None,
in which case the algorithm will be run on the minimum
number of qubits required.
name: str, the resulting tex file will be written to name.tex.
return: None.
"""
#TODO: include drawing of measure gates.
if num_qubits is None: num_qubits = get_num_qubits(algorithm)
drawing_engine = CircuitDrawer()
eng = MainEngine(drawing_engine)
qureg = eng.allocate_qureg(num_qubits)
for gate in algorithm:
if "measure" not in gate.lower(): apply_gate(gate, qureg)
else:
_, gate_args = get_gate_info(gate)
ops.Measure | qureg[gate_args[0]]
eng.flush()
with open("%s.tex" % name, "w") as f:
f.write(drawing_engine.get_latex())
def run_adder(a=11, b=1, param="simulation"):
# build compilation engine list
resource_counter = ResourceCounter()
rule_set = DecompositionRuleSet(
modules=[projectq.libs.math, projectq.setups.decompositions])
compilerengines = [
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3), resource_counter
]
# create a main compiler engine
if param == "latex":
drawing_engine = CircuitDrawer()
eng2 = MainEngine(drawing_engine)
[xa, xb] = initialisation(eng2, a, b)
adder(eng2, xa, xb)
measure(eng2, xa, xb)
print(drawing_engine.get_latex())
else:
eng = MainEngine(Simulator(), compilerengines)
[xa, xb] = initialisation(eng, a, b)
adder(eng, xa, xb)
print(measure(eng, xa, xb))
def run_inv(a=11, b=1, param="simulation"):
# build compilation engine list
resource_counter = ResourceCounter()
rule_set = DecompositionRuleSet(modules=[projectq.libs.math,
projectq.setups.decompositions])
compilerengines = [AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
resource_counter]
# create a main compiler engine
a1 = a
b1 = b
if a == 0:
a1 = 1
if b == 0:
b1 = 1
n = max(int(math.log(a1, 2)), int(math.log(b1, 2))) + 1
if param == "latex":
drawing_engine = CircuitDrawer()
eng2 = MainEngine(drawing_engine)
xa = initialisation_n(eng2, a, n + 1)
xb = initialisation_n(eng2, b, n + 1)
# b --> phi(b)
QFT | xb
phi_adder(eng2, xa, xb)
with Dagger(eng2):
QFT | xb
All(Measure) | xa
All(Measure) | xb
eng2.flush()
print(drawing_engine.get_latex())
else:
eng = MainEngine(Simulator(), compilerengines)
xa = initialisation_n(eng, a, n + 1)
xb = initialisation_n(eng, b, n + 1)
# b --> phi(b)
QFT | xb
with Dagger(eng):
phi_adder(eng, xa, xb)
with Dagger(eng):
QFT | xb
All(Measure) | xa
All(Measure) | xb
eng.flush()
n = n+1
measurements_a = [0] * n
measurements_b = [0] * n
for k in range(n):
measurements_a[k] = int(xa[k])
measurements_b[k] = int(xb[k])
return [measurements_a, meas2int(measurements_b), measurements_b]
def create_eng(path):
drawing_engine = CircuitDrawer()
eng = MainEngine(drawing_engine)
create_circuit(eng, path)
eng.flush()
with open('circuit.tex', 'w') as f:
#print >> f, 'Filename:', filename # Python 2.x
#print('Filename:', filename, file=f) # Python 3.x
print(drawing_engine.get_latex(), file=f)
def test_print_circuit_diagram(self):
"""
This function shows how to print LaTeX-based circuit diagrams.
"""
drawer = CircuitDrawer()
engine = MainEngine(drawer)
qubits = engine.allocate_qureg(3)
All(H) | qubits
X | qubits[2]
CNOT | (qubits[2], qubits[0])
for qubit in qubits:
Measure | qubit
engine.flush()
print(drawer.get_latex())
def runDeutsch(eng, n, oracle):
drawing_engine = CircuitDrawer(
) # Esto nos permite que se registre todo el circuito ejecutado.
# Instanciamos dos qubits, estos se inicializan con valor |0>
x = eng.allocate_qureg(
n
) #on esta instruccion instanciamos un array de qubits, x. (Entrada superior)
q2 = eng.allocate_qubit() # qubit de la entrada inferior
#Aplicamos la puerta H a todos los qubits de x, dejandolos en una superposicion.
All(H) | x
#Ponemos el estado |1> en la entrada inferior y luego aplicamos la puerta H para dejarlo en superposicion.
#De este modo hacemos la inversion de fase.
X | q2
H | q2
oracle(x, q2)
# Volvemos a aplicar H a todos los qubits de x para retirar la superposicion.
# En funicion del oraculo algunos pueden estar en inversion de fase y anularse entre si.
All(H) | x
#Mediciones
All(Measure) | x
Measure | q2
eng.flush()
#Imprimimos cada qubit de la cadena
# Si medimos |0> para todo x, el oraculo implementa una funcion constnate.
# Si encontramos cualquier otra cosa sera balanceada.
for qb in x:
print("Measured: {}".format(int(qb)))
def _initialize_register(num_bit, mode='simulator', noise_model=None):
"""
use an engine instead of current one.
"""
import projectq.setups.default
engine_list = []
# create a main compiler engine with a specific backend:
if mode == 'graphical':
backend = CircuitDrawer()
elif mode == 'simulator':
backend = Simulator()
elif mode == 'noise':
backend = Simulator()
# Create noise engine according to the noise_model
if noise_model is None:
raise
engine_list.append(
NoiseEngine(p=0.01, noise_model=noise_model)
) # TODO: delete specific p later. Consider only noise_model
else:
raise
eng = MainEngine(backend=backend, engine_list=engine_list)
# initialize register
qureg = eng.allocate_qureg(num_bit)
return qureg
def run(x=4, N=7, param="run"):
"""
:param a: a<N and must be invertible mod[N]
:param N:
:param x:
:param param:
:return: |1> --> |(a**x) mod N>
"""
# build compilation engine list
resource_counter = ResourceCounter()
rule_set = DecompositionRuleSet(modules=[projectq.libs.math,
projectq.setups.decompositions])
compilerengines = [AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
resource_counter]
# create a main compiler engine
if param == "latex":
drawing_engine = CircuitDrawer()
eng = MainEngine(drawing_engine)
arcsinQ(eng, x, N)
return drawing_engine
if param == "count":
eng = MainEngine(resource_counter)
arcsinQ(eng, x, N)
return resource_counter
else:
eng = MainEngine(Simulator(), compilerengines)
return arcsinQ(eng, x, N)
def run(args, param="simulation"):
"""
Be careful the Measure command can take a lot of time to execute as you can create as much as qubit as you want
:param args: list of int
:param param: choose between simulation or latex
:return:
"""
# build compilation engine list
resource_counter = ResourceCounter()
rule_set = DecompositionRuleSet(
modules=[projectq.libs.math, projectq.setups.decompositions])
compilerengines = [
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3), resource_counter
]
# create a main compiler engine
if param == "latex":
drawing_engine = CircuitDrawer()
eng2 = MainEngine(drawing_engine)
Xreg = initialisation(eng2, args)
m = len(Xreg)
All(Measure) | Xreg
eng2.flush()
print(drawing_engine.get_latex())
else:
eng = MainEngine(Simulator(), compilerengines)
Xreg = initialisation(eng, args)
m = len(Xreg)
n = Xreg[0].__len__()
for i in range(m):
All(Measure) | Xreg[i]
eng.flush()
measurement = []
for i in range(m):
measurement.append([0] * n)
for k in range(n):
measurement[i][k] = int(Xreg[i][k])
return measurement
def __enter__(self):
'''
Enter context,
Attributes:
eng (MainEngine): main engine.
backend ('graphical' or 'simulate'): backend used.
qureg (Qureg): quantum register.
'''
if self.task == 'ibm':
import projectq.setups.ibm
else:
import projectq.setups.default
# create a main compiler engine with a specific backend:
if self.task == 'draw':
self.backend = CircuitDrawer()
# locations = {0: 0, 1: 1, 2: 2, 3:3} # swap order of lines 0-1-2.
# self.backend.set_qubit_locations(locations)
elif self.task == 'simulate':
print(
'ProjecQ simulation in training can be slow, since in scipy context, we cached a lot gates.'
)
self.backend = Simulator(gate_fusion=True)
elif self.task == 'ibm':
# choose device
device = self.ibm_config.get(
'device', 'ibmqx2' if self.num_bit <= 5 else 'ibmqx5')
# check data
if self.ibm_config is None:
raise
if device == 'ibmqx5':
device_num_bit = 16
else:
device_num_bit = 5
if device_num_bit < self.num_bit:
raise AttributeError(
'device %s has not enough qubits for %d bit simulation!' %
(device, self.num_bit))
self.backend = IBMBackend(use_hardware=True,
num_runs=self.ibm_config['num_runs'],
user=self.ibm_config['user'],
password=self.ibm_config['password'],
device=device,
verbose=True)
else:
raise ValueError('engine %s not defined' % self.task)
self.eng = MainEngine(self.backend)
# initialize register
self.qureg = self.eng.allocate_qureg(self.num_bit)
return self
def __init__(self, delta, numBits, ancillaBit=None):
self.C = C
self.X = X
self.H = H
self.Barrier = Barrier
self.delta = delta
self.numBits = numBits
self.delta_bin = np.binary_repr(delta, numBits)
self.delta_bin = [int(i) for i in self.delta_bin]
self.gatesList = []
self.reverseGatesList = []
self.circuit_drawer = CircuitDrawer()
self.diag_eng = MainEngine(self.circuit_drawer)
self.valreg = self.diag_eng.allocate_qureg(self.numBits)
self.refreg = self.diag_eng.allocate_qureg(self.numBits)
if (ancillaBit is None):
self.ancilla = self.diag_eng.allocate_qureg(1)
else:
self.ancilla = ancillaBit
def _initialize_register(num_bit, mode='simulator'):
'''
use an engine instead of current one.
'''
import projectq.setups.default
# create a main compiler engine with a specific backend:
if mode == 'graphical':
backend = CircuitDrawer()
elif mode == 'simulator':
backend = Simulator()
else:
raise
eng = MainEngine(backend)
# initialize register
qureg = eng.allocate_qureg(num_bit)
return qureg
def runSimon(eng, n, oracle):
drawing_engine = CircuitDrawer() # Esto nos permite que se registre todo el circuito ejecutado.
x = eng.allocate_qureg(n) #con esta instruccion instanciamos un array de qubits, x. (Entrada superior)
y = eng.allocate_qureg(n) #con esta instruccion instanciamos un array de qubits, y. (Entrada inferior)
#Aplicamos la puerta H a todos los qubits de x, dejandolos en una superposicion.
All(H) | x
oracle(x,y)
# Volvemos a aplicar H a todos los qubits de x para retirar la superposicion.
# En funicion del oraculo algunos pueden estar en inversion de fase y anularse entre si.
All(H) | x
#Mediciones
All(Measure) | x
All(Measure) | y
for qs in x:
print("Measured: {}".format(int(qs)))
def runDeutsch(eng, oracle):
drawing_engine = CircuitDrawer() # Esto nos permite que se registre todo el circuito ejecutado.
# Instanciamos dos qubits, estos se inicializan con valor |0>
q1 = eng.allocate_qubit()
q2 = eng.allocate_qubit()
X | q2 #Para realizar la inversion de fase dejamos el estado |1> con la puerta X
# Ahora dejamos en superposicion los dos qubits mediante la puerta H.
H | q1 # 1/sqrt(2) (|0> + |1>)
H | q2 # 1/sqrt(2) (|0> - |1>)
oracle(q1,q2) # Aplicamos U y obtenemos el estado: -1^f(x) |x> q2
H | q1 # Aplicamos H para quitar la superposicion y obtener el estado 0|0> o -1|0>
#Mediciones
Measure | q1
Measure | q2
eng.flush() #Con esta instruccion finalizamos la parte cuantica
# Ahora mostramos el valor de q1, si este esta en el estado |0> el oraculo implementa una funcion constante.
# Por otro lado si tiene el estado |1> seria balanceada.
print("Measured: {}".format(int(q1)))
from projectq import MainEngine
from projectq.backends import CircuitDrawer
import teleport
if __name__ == "__main__":
# create a main compiler engine with a simulator backend:
drawing_engine = CircuitDrawer()
locations = {0: 1, 1: 2, 2: 0}
drawing_engine.set_qubit_locations(locations)
eng = MainEngine(drawing_engine)
# we just want to draw the teleportation circuit
def create_state(eng, qb):
pass
# run the teleport and then, let Bob try to uncompute his qubit:
teleport.run_teleport(eng, create_state, verbose=False)
# print latex code to draw the circuit:
print(drawing_engine.get_latex())
from projectq import MainEngine import projectq.ops as ops from projectq.backends import CircuitDrawer # ============================================================================= # imports # ============================================================================= # grab an engine eng = MainEngine() # get some qubits qbits = eng.allocate_qureg(1) # add instructions to the circuit ops.H | qbits[0] ops.Measure | qbits[0] # run the circuit eng.flush() # display the result print(int(qbits[0])) # ============================================================================= # generate tex code for drawing the circuit with tikz # ============================================================================= drawing_engine = CircuitDrawer() print(drawing_engine.get_latex())
def run(a=4, b=6, N=7, x=2, param="count"):
"""
Last update 19/02 : nb of gate linear in log(N)
Be careful this algo is a bit long to execute
|b> --> |b+(ax) mod N> works for
:param a:
:param b:
:param N:
:param x:
:param param:
:return:
"""
# build compilation engine list
resource_counter = ResourceCounter()
rule_set = DecompositionRuleSet(
modules=[projectq.libs.math, projectq.setups.decompositions])
compilerengines = [
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3), resource_counter
]
# create a main compiler engine
n = int(math.log(N, 2)) + 1
if param == "latex":
drawing_engine = CircuitDrawer()
eng2 = MainEngine(drawing_engine)
xN = initialisation_n(eng2, N, n + 1)
xx = initialisation_n(eng2, x, n + 1)
xb = initialisation_n(eng2, b, n + 1)
[xc, aux] = initialisation(eng2, [1, 0])
cMultModN_non_Dagger(eng2, a, xb, xx, xN, aux, xc)
eng2.flush()
Measure | aux
Measure | xc
All(Measure) | xx
All(Measure) | xb
All(Measure) | xN
eng2.flush()
print(drawing_engine.get_latex())
else:
if param == "count":
eng = MainEngine(resource_counter)
else:
eng = MainEngine(Simulator(), compilerengines)
xN = initialisation_n(eng, N, n + 1)
xx = initialisation_n(eng, x, n + 1)
xb = initialisation_n(eng, b, n + 1)
[aux, xc] = initialisation(eng, [0, 1])
cMultModN_non_Dagger(eng, a, xb, xx, xN, aux, xc, N)
Measure | aux
Measure | xc
All(Measure) | xx
All(Measure) | xb
All(Measure) | xN
eng.flush()
if param == "count":
return resource_counter
measurements_b = [0] * n
measurements_x = [0] * n
measurements_N = [0] * n
for k in range(n):
measurements_b[k] = int(xb[k])
measurements_N[k] = int(xN[k])
measurements_x[k] = int(xx[k])
mes_aux = int(aux[0])
mes_c = int(aux[0])
return [
measurements_b,
meas2int(measurements_b), (b + a * x) % N, measurements_N,
measurements_x, mes_aux, mes_c,
meas2int(measurements_b),
meas2int(measurements_N),
meas2int(measurements_x)
]
from projectq import MainEngine
from projectq.backends import CircuitDrawer
from projectq.ops import All, CNOT, H, Measure, Rz, X, Z
def getBellPair(engine):
bit1 = engine.allocate_qubit()
bit2 = engine.allocate_qubit()
H | bit1
CNOT | (bit1, bit2)
return bit1, bit2
circuit_drawer = CircuitDrawer()
engine = MainEngine(circuit_drawer)
getBellPair(engine)
engine.flush()
print(circuit_drawer.get_latex())
from projectq import MainEngine
from projectq.ops import H, Measure, CNOT, All
from projectq.meta import Compute, Uncompute
from projectq.backends import CircuitDrawer
draw_bnd = CircuitDrawer()
eng = MainEngine(draw_bnd)
q0 = eng.allocate_qubit()
q1 = eng.allocate_qubit()
H | q0
with Compute(eng):
q3 = eng.allocate_qubit()
H | q1
CNOT | (q1, q3)
CNOT | (q0, q1)
Uncompute(eng)
All(Measure) | [q0, q1]
eng.flush()
print(int(q0))
print(int(q1))
class DHAOracle:
def __init__(self, delta, numBits, ancillaBit=None):
self.C = C
self.X = X
self.H = H
self.Barrier = Barrier
self.delta = delta
self.numBits = numBits
self.delta_bin = np.binary_repr(delta, numBits)
self.delta_bin = [int(i) for i in self.delta_bin]
self.gatesList = []
self.reverseGatesList = []
self.circuit_drawer = CircuitDrawer()
self.diag_eng = MainEngine(self.circuit_drawer)
self.valreg = self.diag_eng.allocate_qureg(self.numBits)
self.refreg = self.diag_eng.allocate_qureg(self.numBits)
if (ancillaBit is None):
self.ancilla = self.diag_eng.allocate_qureg(1)
else:
self.ancilla = ancillaBit
# old qiskit ver
# self.valreg = QuantumRegister(self.numBits, 'val')
# self.refreg = QuantumRegister(self.numBits, 'reg')
# self.qc = QuantumCircuit(self.valreg, self.refreg)
# self.circdrawer = circuit_drawer(self.qc)
def makeGates(self, delta_bin=None):
if delta_bin is None:
delta_bin = self.delta_bin
idx = 0 # current bit
cidx = 0 # current control bit
prefix = [] # initialize with no prefixes
while (idx<len(delta_bin)):
# debug
print (idx)
# Condition 0. For each 0 at the start, place a simple CNOT.
if delta_bin[idx] == 0:
print('Condition 0')
self.gatesList.append(tuple([self.valreg[prefix[i]] for i in range(len(prefix))]) + tuple([self.valreg[idx]]) + tuple([self.refreg[cidx]]))
idx = idx+1 # move to next bit/next iteration
cidx = cidx+1
# Condition 1. All remaining bits are 1. E.g. 11111, 01111 etc.
elif np.all(delta_bin[idx:]):
print('Condition 1')
self.gatesList.append(tuple([self.valreg[prefix[i]] for i in range(len(prefix))]) + tuple([self.valreg[i] for i in range(idx, len(delta_bin))]) + tuple([self.refreg[cidx]]))
print('Exited at idx ' + str(idx)) # DEBUG
idx = len(delta_bin) # end the loop, early stopping
# Condition 2a. Current bit is 1, rest are 0. E.g. 01000 etc.
elif np.all(np.logical_not(delta_bin[idx+1:])) and delta_bin[idx] == 1:
print('Condition 2a')
self.gatesList.append(tuple([self.valreg[prefix[i]] for i in range(len(prefix))]) + tuple([self.valreg[idx]]) + tuple([self.refreg[cidx]]))
print('Exited at idx ' + str(idx)) # DEBUG
idx = len(delta_bin) # early stopping
# Condition 2b. Current bit is 1. End of sequence.
elif (idx == len(delta_bin)-1) and delta_bin[idx] == 1:
print('Condition 2b')
self.gatesList.append(tuple([self.valreg[prefix[i]] for i in range(len(prefix))]) + tuple([self.valreg[idx]]) + tuple([self.refreg[cidx]]))
print('Exited at idx ' + str(idx)) # DEBUG
idx = len(delta_bin) # early stopping
# Condition 3. Current bit is 1. All special cases failed.
elif (delta_bin[idx] == 1):
print('Condition 3')
prefix.append(idx)
idx = idx + 1
# but we don't need to move cidx
# Condition 4. Current bit is 0. All special cases failed.
elif (delta_bin[idx] == 0):
print('Condition 4')
# attach all existing prefixes, and write a toffoli with a node at the 0
self.gatesList.append(tuple([self.valreg[prefix[i]] for i in range(len(prefix))]) + tuple([self.valreg[idx]]) + tuple([self.refreg[cidx]]))
idx = idx + 1
else:
print('Unknown conditions')
# implement the gates
for i in range(len(self.gatesList)):
print(self.gatesList[i])
# implement the gate
self.C(X,len(self.gatesList[i])-1) | self.gatesList[i]
# Barrier for neatness?
self.Barrier | (self.valreg, self.refreg, self.ancilla)
# implement X gates on 0 bits
for i in range(len(delta_bin)):
if (delta_bin[i] == 0):
self.X | self.refreg[i]
# implement Hadamard on ancilla
self.H | self.ancilla
# implement centre Toffoli
self.C(X,len(delta_bin)) | (self.refreg, self.ancilla)
# == and then implement all the reverses ==
# implement Hadamard on ancilla
self.H | self.ancilla
# implement X gates on 0 bits
for i in range(len(delta_bin)):
if (delta_bin[i] == 0):
self.X | self.refreg[i]
# Barrier for neatness?
self.Barrier | (self.valreg, self.refreg, self.ancilla)
# implement the gates
for i in range(len(self.gatesList)-1, -1, -1):
print(self.gatesList[i])
# implement the gate
self.C(X,len(self.gatesList[i])-1) | self.gatesList[i]
# flush gates
self.diag_eng.flush()
def showGates(self, adjustBarrier=False):
text2print = self.circuit_drawer.get_latex()
if adjustBarrier:
# fix the barrier text to be vertical
text2print = text2print.replace("Barrier", "\\rotatebox{90}{Barrier}")
print('\n')
print(text2print)
return text2print
from projectq import MainEngine # import the main compiler engine
from projectq.ops import C, X, H, Measure # import the operations we want to perform (Hadamard and measurement)
from projectq.backends import CircuitDrawer
circuit_backend = CircuitDrawer()
eng = MainEngine(
circuit_backend) # create a default compiler (the back-end is a simulator)
qubit = eng.allocate_qubit() # allocate a quantum register with 1 qubit
qureg = eng.allocate_qureg(5)
# how about a list of qubits?
lq = (qureg[0], qureg[1], qureg[3], qureg[4])
H | qubit # apply a Hadamard gate
Measure | qubit # measure the qubit
C(X, 3) | (qureg[0], qureg[1], qureg[2], qureg[3])
C(X, 3) | lq
eng.flush() # flush all gates (and execute measurements)
print(
"Measured {}".format(int(qubit))
) # converting a qubit to int or bool gives access to the measurement result
print(circuit_backend.get_latex())
def zoo_profile():
"""Generate and display the zoo of quantum gates."""
# create a main compiler engine with a drawing backend
drawing_engine = CircuitDrawer()
locations = {0: 1, 1: 2, 2: 0, 3: 3}
drawing_engine.set_qubit_locations(locations)
main_eng = MainEngine(drawing_engine)
qureg = main_eng.allocate_qureg(4)
# define a zoo of gates
te_gate = TimeEvolution(0.5, 0.1 * QubitOperator('X0 Y2'))
def add(x, y):
return x, y + 1
zoo = [
(X, 3),
(Y, 2),
(Z, 0),
(Rx(0.5), 2),
(Ry(0.5), 1),
(Rz(0.5), 1),
(Ph(0.5), 0),
(S, 3),
(T, 2),
(H, 1),
(Toffoli, (0, 1, 2)),
(Barrier, None),
(Swap, (0, 3)),
(SqrtSwap, (0, 1)),
(get_inverse(SqrtSwap), (2, 3)),
(SqrtX, 2),
(C(get_inverse(SqrtX)), (0, 2)),
(C(Ry(0.5)), (2, 3)),
(CNOT, (2, 1)),
(Entangle, None),
(te_gate, None),
(QFT, None),
(Tensor(H), None),
(BasicMathGate(add), (2, 3)),
(All(Measure), None),
]
# apply them
for gate, pos in zoo:
if pos is None:
gate | qureg
elif isinstance(pos, tuple):
gate | tuple(qureg[i] for i in pos)
else:
gate | qureg[pos]
main_eng.flush()
# generate latex code to draw the circuit
s = drawing_engine.get_latex()
prefix = 'zoo'
with open('{}.tex'.format(prefix), 'w') as f:
f.write(s)
# compile latex source code and open pdf file
os.system('pdflatex {}.tex'.format(prefix))
openfile('{}.pdf'.format(prefix))
def run(a=4, N=7, x=2, param="count"):
"""
|b> --> |b+(ax) mod N>
nb of gate ~454*log2(N)
:param a: a<N and must be invertible mod[N]
:param N:
:param x:
:param param:
:return:
"""
# build compilation engine list
resource_counter = ResourceCounter()
rule_set = DecompositionRuleSet(
modules=[projectq.libs.math, projectq.setups.decompositions])
compilerengines = [
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3), resource_counter
]
# create a main compiler engine
a = a % N
inv_a = mod_inv(a, N)
b = 0
n = int(math.log(N, 2)) + 1
if param == "latex":
drawing_engine = CircuitDrawer()
eng2 = MainEngine(drawing_engine)
xN = initialisation_n(eng2, N, n + 1)
xx = initialisation_n(eng2, x, n + 1)
xb = initialisation_n(eng2, b, n + 1)
[xc, aux] = initialisation(eng2, [1, 0])
gateUa(eng2, a, inv_a, xx, xb, xN, aux, xc, N)
eng2.flush()
Measure | aux
Measure | xc
All(Measure) | xx
All(Measure) | xb
All(Measure) | xN
eng2.flush()
print(drawing_engine.get_latex())
else:
if param == "count":
eng = MainEngine(resource_counter)
else:
eng = MainEngine(Simulator(), compilerengines)
xN = initialisation_n(eng, N, n + 1)
xx = initialisation_n(eng, x, n + 1)
xb = initialisation_n(eng, b, n + 1)
[xc, aux] = initialisation(eng, [1, 0])
gateUa(eng, a, inv_a, xx, xb, xN, aux, xc, N)
Measure | aux
Measure | xc
All(Measure) | xx
All(Measure) | xb
All(Measure) | xN
eng.flush()
if param == "count":
return resource_counter
measurements_b = [0] * n
measurements_x = [0] * n
measurements_N = [0] * n
for k in range(n):
measurements_b[k] = int(xb[k])
measurements_N[k] = int(xN[k])
measurements_x[k] = int(xx[k])
mes_aux = int(aux[0])
mes_c = int(aux[0])
assert int(xb[n]) == 0
assert int(xN[n]) == 0
assert int(xx[n]) == 0
assert meas2int(measurements_b) == 0
assert meas2int(measurements_N) == N
assert mes_aux == 0
return [(a * x) % N, meas2int(measurements_x), measurements_x, mes_c]
from Bell_States_Generator import bell_state
from Quantum_Teleportation import quantum_teleportation
from projectq import MainEngine
from projectq.backends import CircuitDrawer
from projectq.ops import H,Rz
import os
drawer=CircuitDrawer()
eng=MainEngine(drawer)
qubit_psi=eng.allocate_qubit()
H|qubit_psi
Rz(1.32)|qubit_psi
quantum_teleportation(eng,qubit_psi)
eng.flush()
with open("./circuit_plot/quantum_teleportation.tex","w") as f:
f.write(drawer.get_latex())
Args:
eng (MainEngine): Main compiler engine the algorithm is being run on.
qubits (Qureg): n-qubit quantum register Grover search is run on.
output (Qubit): Output qubit to flip in order to mark the solution.
"""
with Compute(eng):
All(X) | qubits[1::2]
with Control(eng, qubits):
X | output
Uncompute(eng)
if __name__ == "__main__":
# create a main compiler engine with a simulator backend:
drawing_engine = CircuitDrawer()
locations = {0: 1, 1: 2, 2: 3, 3: 4, 4: 5, 5: 6, 6: 0}
drawing_engine.set_qubit_locations(locations)
eng = MainEngine() # use default compiler engine
#eng = MainEngine(drawing_engine) # use default compiler engine
# run Grover search to find a 7-bit solution
solution = run_grover(eng, 7, alternating_bits_oracle)
#solution = run_grover(eng, 6, alternating_bits_oracle)
print(solution)
# print latex code to draw the circuit:
#print(drawing_engine.get_latex())
def run(a=4, N=7, x=2, param="run"):
"""
:param a: a<N and must be invertible mod[N]
:param N:
:param x:
:param param:
:return: |1> --> |(a**x) mod N>
"""
# build compilation engine list
resource_counter = ResourceCounter()
rule_set = DecompositionRuleSet(
modules=[projectq.libs.math, projectq.setups.decompositions])
compilerengines = [
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3), resource_counter
]
# create a main compiler engine
a = a % N
b = 0
n = int(math.log(N, 2)) + 1
if param == "latex":
drawing_engine = CircuitDrawer()
eng = MainEngine(drawing_engine)
if param == "count":
eng = MainEngine(resource_counter)
else:
eng = MainEngine(Simulator(), compilerengines)
output = initialisation_n(eng, 1, n + 1)
xN = initialisation_n(eng, N, n + 1)
xx = initialisation_n(eng, x, n + 1)
xb = initialisation_n(eng, b, n + 1)
aux = initialisation_n(eng, 0, 1)
expoModN(eng, a, output, xb, xN, aux, xx, N)
Measure | aux
All(Measure) | output
All(Measure) | xx
All(Measure) | xb
All(Measure) | xN
eng.flush()
if param == "count":
return resource_counter
if param == "latex":
print(drawing_engine.get_latex())
measurements_b = [0] * n
measurements_x = [0] * n
measurements_N = [0] * n
for k in range(n):
measurements_b[k] = int(xb[k])
measurements_N[k] = int(xN[k])
measurements_x[k] = int(output[k])
mes_aux = int(aux[0])
assert int(xb[n]) == 0
assert int(xN[n]) == 0
assert int(xx[n]) == 0
assert meas2int(measurements_b) == 0
assert meas2int(measurements_N) == N
assert mes_aux == 0
return [(a**x) % N, meas2int(measurements_x), measurements_x]
X | b2
with Control(eng, psi):
Z | b2
if verbose:
print("Bob is trying to uncompute the state.")
with Dagger(eng):
state_creation_function(eng, b2)
del b2
eng.flush()
if verbose:
print("Bob successfully arrived at |0>")
if __name__ == "__main__":
drawing_engine = CircuitDrawer()
resource_counter = ResourceCounter()
#eng = MainEngine(drawing_engine) #tex drawing
eng = MainEngine(backend=resource_counter) #resource counter
def create_state(eng, qb):
H | qb
Rz(1.21) | qb
run_teleport(eng, create_state, verbose=True)
eng.flush()
#print(drawing_engine.get_latex()) #tex drawing
print(resource_counter) #resource counter
def run(a=11, b=1, N=12, param="simulation"):
# build compilation engine list
resource_counter = ResourceCounter()
rule_set = DecompositionRuleSet(
modules=[projectq.libs.math, projectq.setups.decompositions])
compilerengines = [
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3),
AutoReplacer(rule_set),
TagRemover(),
LocalOptimizer(3), resource_counter
]
# create a main compiler engine
n = int(math.log(N, 2)) + 1
if param == "latex":
drawing_engine = CircuitDrawer()
eng2 = MainEngine(drawing_engine)
xN = initialisation_n(eng2, N, n + 1)
xa = initialisation_n(eng2, a, n + 1)
xb = initialisation_n(eng2, b, n + 1)
c1 = initialisation_n(eng2, 1)
c2 = initialisation_n(eng2, 1)
aux = initialisation_n(eng2, 0)
# b --> phi(b)
QFT | xb
modularAdder(eng2, xa, xb, xN, c1, c2, aux)
with Dagger(eng2):
QFT | xb
Measure | c1
Measure | c2
Measure | aux
All(Measure) | xa
All(Measure) | xb
All(Measure) | xN
eng2.flush()
print(drawing_engine.get_latex())
else:
eng = MainEngine(Simulator(), compilerengines)
xN = initialisation_n(eng, N, n + 1)
xa = initialisation_n(eng, a, n + 1)
xb = initialisation_n(eng, b, n + 1)
[c1, c2, aux] = initialisation(eng, [1, 1, 0])
# b --> phi(b)
QFT | xb
modularAdder(eng, xa, xb, xN, c1, c2, aux)
with Dagger(eng):
QFT | xb
Measure | c1
Measure | c2
Measure | aux
All(Measure) | xa
All(Measure) | xb
All(Measure) | xN
eng.flush()
measurements_a = [0] * n
measurements_b = [0] * n
measurements_N = [0] * n
for k in range(n):
measurements_a[k] = int(xa[k])
measurements_b[k] = int(xb[k])
measurements_N[k] = int(xN[k])
return [
measurements_a, measurements_b,
int(xb[n]), measurements_N,
int(aux[0]),
int(c1[0]),
int(c2[0]),
meas2int(measurements_b), (a + b) % N
]
from projectq import MainEngine # import the main compiler engine
from projectq.ops import All, CNOT, NOT, H, Toffoli, Measure # import the operations we want to perform
from projectq.backends import CircuitDrawer
sumando_1 = input("Primer sumando en binario (4 bits)")
sumando_2 = input("Segundo sumando en binario(4 bits)")
n = 4
backend = CircuitDrawer()
#ResourceCounter()
eng = MainEngine(backend)
#eng = MainEngine()
a = eng.allocate_qureg(n)
b = eng.allocate_qureg(n+1)
c = eng.allocate_qureg(1)
for i in range(n):
if sumando_1[i] == "1":
NOT | (a[n - (i+1)])
for i in range(n):
if sumando_2[i] == "1":
NOT | (b[n - (i+1)])
for i in range(1, n):
CNOT | (a[i], b[i])
CNOT | (a[1], c[0])
Toffoli | (a[0], b[0], c[0])
