def noIK_6dof(cls):
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "CGM2\\cgm2.4\\fullBody\\"
staticFilename = "PN01OP01S01STAT.c3d"
gaitFilename = "PN01OP01S01STAT.c3d"
markerDiameter = 14
mp = {
'Bodymass': 83.0,
'LeftLegLength': 874.0,
'RightLegLength': 876.0,
'LeftKneeWidth': 106.0,
'RightKneeWidth': 103.0,
'LeftAnkleWidth': 74.0,
'RightAnkleWidth': 72.0,
'LeftSoleDelta': 0,
'RightSoleDelta': 0,
}
# --- Calibration ---
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
translators = files.getTranslators(MAIN_PATH, "CGM2_4.translators")
acqStatic = btkTools.applyTranslators(acqStatic, translators)
model = cgm2.CGM2_4()
model.configure()
model.addAnthropoInputParameters(mp)
# ---- Calibration ----
scp = modelFilters.StaticCalibrationProcedure(model)
modelFilters.ModelCalibrationFilter(scp, acqStatic, model).compute()
print "----"
print model.getSegment("Left Shank").getReferential(
"TF").relativeMatrixAnatomic
print "----"
# # cgm decorator
modelDecorator.HipJointCenterDecorator(model).hara()
modelDecorator.KneeCalibrationDecorator(model).midCondyles(
acqStatic, markerDiameter=markerDiameter, side="both")
modelDecorator.AnkleCalibrationDecorator(model).midMaleolus(
acqStatic, markerDiameter=markerDiameter, side="both")
#
# # final
modelFilters.ModelCalibrationFilter(
scp, acqStatic, model, markerDiameter=markerDiameter).compute()
# ------ Fitting -------
acqGait = btkTools.smartReader(str(MAIN_PATH + gaitFilename))
acqGait = btkTools.applyTranslators(acqGait, translators)
# Motion FILTER
modMotion = modelFilters.ModelMotionFilter(
scp, acqGait, model, enums.motionMethod.Sodervisk)
modMotion.compute()
btkTools.smartWriter(acqGait, "cgm24_noIK6dof_staticMotion.c3d")
def cgm1_sacrum(cls):
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "operations\\Translators\\cgm1-sacr\\"
staticFilename = "static.c3d"
translators = files.getTranslators(MAIN_PATH,
translatorType="CGM1.translators")
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
acqStatic2 = btkTools.applyTranslators(acqStatic, translators)
btkTools.smartWriter(acqStatic2, "staticCGM1Sacrum.c3d")
np.testing.assert_equal(
acqStatic2.GetPoint("LPSI").GetValues(),
acqStatic.GetPoint("SACR").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("RPSI").GetValues(),
acqStatic.GetPoint("SACR").GetValues())
def test_cgm1_sacrum(self):
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "LowLevel\\translators\\cgm1-sacr\\"
staticFilename = "static.c3d"
DATA_PATH_OUT = pyCGM2.TEST_DATA_PATH_OUT + "LowLevel\\translators\\cgm1-sacr\\"
files.createDir(DATA_PATH_OUT)
translators = files.getTranslators(MAIN_PATH,
translatorType="CGM1.translators")
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
acqStatic2 = btkTools.applyTranslators(acqStatic, translators)
btkTools.smartWriter(acqStatic2,
DATA_PATH_OUT + "staticCGM1Sacrum.c3d")
np.testing.assert_equal(
acqStatic2.GetPoint(utils.str("LPSI")).GetValues(),
acqStatic.GetPoint(utils.str("SACR")).GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint(utils.str("RPSI")).GetValues(),
acqStatic.GetPoint(utils.str("SACR")).GetValues())
def scenario3Test(cls):
"""
the pyCGM2 marker is IN the c3d. it points to another pyCGM2 marker which is IN c3d
( e.g : LTHI points to LTHAP)
return:
the translator and your own markers point to similar values (e.g LTHI amd LTAP point same values)
a new marker suffixed with _origin for keeping a trace of the translator found in the c3d ( eg LTHi renamed LTHI_origin )
"""
contents24 = """
Translators:
LASI: None
RASI: None
LPSI: None
RPSI: None
RTHI: None
RKNE: None
RTIAP: None
RTIAD: None
RTIB: None
RANK: None
RTIAP: None
RTIAD: None
RHEE: None
RSMH: None
RTOE: None
RFMH: None
RVMH: None
LTHI: LTHAD
LKNE: None
LTHAP: None
LTHAD: None
LTIB: None
LANK: None
LTIAP: None
LTIAD: None
LHEE: None
LSMH: None
LTOE: None
LFMH: None
LVMH: None
RKNM: None
LKNM: None
RMED: None
LMED: None
C7: None
T10: None
CLAV: None
STRN: None
LFHD: None
LBHD: None
RFHD: None
RBHD: None
LSHO: None
LELB: None
LWRB: None
LWRA: None
LFIN: None
RSHO: None
RELB: None
RWRB: None
RWRA: None
RFIN: None
"""
translators = files.openYaml(None, None, contents24)
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "operations\\Translators\\scenario3\\"
staticFilename = "staticAlana.c3d"
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
acqStatic2 = btkTools.applyTranslators(acqStatic,
translators["Translators"])
btkTools.smartWriter(acqStatic2, "scenario3Test.c3d")
np.testing.assert_equal(
acqStatic2.GetPoint("LTHI").GetValues(),
acqStatic2.GetPoint("LTHAD").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("LTHI_origin").GetValues(),
acqStatic.GetPoint("LTHI").GetValues())
def calibrate(DATA_PATH, calibrateFilenameLabelled, translators, weights,
required_mp, optional_mp, ik_flag, leftFlatFoot, rightFlatFoot,
headFlat, markerDiameter, hjcMethod, pointSuffix, **kwargs):
"""
Calibration of the CGM2.5
:param DATA_PATH [str]: path to your data
:param calibrateFilenameLabelled [str]: c3d file
:param translators [dict]: translators to apply
:param required_mp [dict]: required anthropometric data
:param optional_mp [dict]: optional anthropometric data (ex: LThighOffset,...)
:param ik_flag [bool]: enable the inverse kinematic solver
:param leftFlatFoot [bool]: enable of the flat foot option for the left foot
:param rightFlatFoot [bool]: enable of the flat foot option for the right foot
:param headFlat [bool]: enable of the head flat option
:param markerDiameter [double]: marker diameter (mm)
:param hjcMethod [str or list of 3 float]: method for locating the hip joint centre
:param pointSuffix [str]: suffix to add to model outputs
"""
detectAnomaly = False
if "anomalyException" in kwargs.keys():
anomalyException = kwargs["anomalyException"]
else:
anomalyException = False
if "Fitting" in weights.keys():
weights = weights["Fitting"]["Weight"]
# ---btk acquisition---
if "forceBtkAcq" in kwargs.keys():
acqStatic = kwargs["forceBtkAcq"]
else:
acqStatic = btkTools.smartReader(
(DATA_PATH + calibrateFilenameLabelled))
btkTools.checkMultipleSubject(acqStatic)
if btkTools.isPointExist(acqStatic, "SACR"):
translators["LPSI"] = "SACR"
translators["RPSI"] = "SACR"
LOGGER.logger.info("[pyCGM2] Sacrum marker detected")
acqStatic = btkTools.applyTranslators(acqStatic, translators)
trackingMarkers = cgm2.CGM2_5.LOWERLIMB_TRACKING_MARKERS + cgm2.CGM2_5.THORAX_TRACKING_MARKERS + cgm2.CGM2_5.UPPERLIMB_TRACKING_MARKERS
actual_trackingMarkers, phatoms_trackingMarkers = btkTools.createPhantoms(
acqStatic, trackingMarkers)
vff = acqStatic.GetFirstFrame()
vlf = acqStatic.GetLastFrame()
# vff,vlf = btkTools.getFrameBoundaries(acqStatic,actual_trackingMarkers)
flag = btkTools.getValidFrames(acqStatic,
actual_trackingMarkers,
frameBounds=[vff, vlf])
gapFlag = btkTools.checkGap(acqStatic,
actual_trackingMarkers,
frameBounds=[vff, vlf])
if gapFlag:
raise Exception(
"[pyCGM2] Calibration aborted. Gap find during interval [%i-%i]. Crop your c3d "
% (vff, vlf))
# --------------------ANOMALY------------------------------
# --Check MP
adap = AnomalyDetectionProcedure.AnthropoDataAnomalyProcedure(required_mp)
adf = AnomalyFilter.AnomalyDetectionFilter(None, None, adap)
mp_anomaly = adf.run()
if mp_anomaly["ErrorState"]: detectAnomaly = True
# --marker presence
markersets = [
cgm2.CGM2_5.LOWERLIMB_TRACKING_MARKERS,
cgm2.CGM2_5.THORAX_TRACKING_MARKERS,
cgm2.CGM2_5.UPPERLIMB_TRACKING_MARKERS
]
for markerset in markersets:
ipdp = InspectorProcedure.MarkerPresenceDetectionProcedure(markerset)
idf = InspectorFilter.InspectorFilter(acqStatic,
calibrateFilenameLabelled, ipdp)
inspector = idf.run()
# # --marker outliers
if inspector["In"] != []:
madp = AnomalyDetectionProcedure.MarkerAnomalyDetectionRollingProcedure(
inspector["In"], plot=False, window=4, threshold=3)
adf = AnomalyFilter.AnomalyDetectionFilter(
acqStatic, calibrateFilenameLabelled, madp)
anomaly = adf.run()
anomalyIndexes = anomaly["Output"]
if anomaly["ErrorState"]: detectAnomaly = True
if detectAnomaly and anomalyException:
raise Exception(
"Anomalies has been detected - Check Warning message of the log file"
)
# --------------------MODELLING------------------------------
# ---check marker set used----
dcm = cgm.CGM.detectCalibrationMethods(acqStatic)
# --------------------------MODEL--------------------------------------
# ---definition---
model = cgm2.CGM2_5()
model.configure(detectedCalibrationMethods=dcm)
model.addAnthropoInputParameters(required_mp, optional=optional_mp)
if dcm["Left Knee"] == enums.JointCalibrationMethod.KAD:
actual_trackingMarkers.append("LKNE")
if dcm["Right Knee"] == enums.JointCalibrationMethod.KAD:
actual_trackingMarkers.append("RKNE")
model.setStaticTrackingMarkers(actual_trackingMarkers)
# --store calibration parameters--
model.setStaticFilename(calibrateFilenameLabelled)
model.setCalibrationProperty("leftFlatFoot", leftFlatFoot)
model.setCalibrationProperty("rightFlatFoot", rightFlatFoot)
model.setCalibrationProperty("headFlat", headFlat)
model.setCalibrationProperty("markerDiameter", markerDiameter)
# --------------------------STATIC CALBRATION--------------------------
scp = modelFilters.StaticCalibrationProcedure(
model) # load calibration procedure
# ---initial calibration filter----
# use if all optional mp are zero
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter,
).compute()
# ---- Decorators -----
decorators.applyBasicDecorators(dcm, model, acqStatic, optional_mp,
markerDiameter)
decorators.applyHJCDecorators(model, hjcMethod)
# ----Final Calibration filter if model previously decorated -----
if model.decoratedModel:
# initial static filter
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter).compute()
# ----------------------CGM MODELLING----------------------------------
# ----motion filter----
modMotion = modelFilters.ModelMotionFilter(scp,
acqStatic,
model,
enums.motionMethod.Sodervisk,
markerDiameter=markerDiameter)
modMotion.compute()
# ----progression Frame----
progressionFlag = False
if btkTools.isPointsExist(acqStatic, ['LASI', 'RASI', 'RPSI', 'LPSI'],
ignorePhantom=False):
LOGGER.logger.info(
"[pyCGM2] - progression axis detected from Pelvic markers ")
pfp = progressionFrame.PelvisProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqStatic, pfp)
pff.compute()
progressionAxis = pff.outputs["progressionAxis"]
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
progressionFlag = True
elif btkTools.isPointsExist(acqStatic, ['C7', 'T10', 'CLAV', 'STRN'],
ignorePhantom=False) and not progressionFlag:
LOGGER.logger.info(
"[pyCGM2] - progression axis detected from Thoracic markers ")
pfp = progressionFrame.ThoraxProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqStatic, pfp)
pff.compute()
progressionAxis = pff.outputs["progressionAxis"]
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
else:
globalFrame = "XYZ"
progressionAxis = "X"
forwardProgression = True
LOGGER.logger.error(
"[pyCGM2] - impossible to detect progression axis - neither pelvic nor thoracic markers are present. Progression set to +X by default "
)
# ----manage IK Targets----
ikTargets = list()
for target in weights.keys():
if target not in actual_trackingMarkers:
weights[target] = 0
LOGGER.logger.warning(
"[pyCGM2] - the IK targeted marker [%s] is not labelled in the acquisition [%s]"
% (target, calibrateFilenameLabelled))
else:
ikTargets.append(target)
model.setStaticIkTargets(ikTargets)
if "noKinematicsCalculation" in kwargs.keys(
) and kwargs["noKinematicsCalculation"]:
LOGGER.logger.warning(
"[pyCGM2] No Kinematic calculation done for the static file")
return model, acqStatic, detectAnomaly
else:
if ik_flag:
# ---OPENSIM IK---
# --- opensim calibration Filter ---
osimfile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\osim\\lowerLimb_ballsJoints.osim" # osimfile
markersetFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_4\\cgm2_4-markerset.xml" # markerset
cgmCalibrationprocedure = opensimFilters.CgmOpensimCalibrationProcedures(
model) # procedure
oscf = opensimFilters.opensimCalibrationFilter(
osimfile, model, cgmCalibrationprocedure, DATA_PATH)
oscf.addMarkerSet(markersetFile)
scalingOsim = oscf.build()
# --- opensim Fitting Filter ---
iksetupFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_4\\cgm2_4-ikSetUp_template.xml" # ik tool file
cgmFittingProcedure = opensimFilters.CgmOpensimFittingProcedure(
model) # procedure
cgmFittingProcedure.updateMarkerWeight("LASI", weights["LASI"])
cgmFittingProcedure.updateMarkerWeight("RASI", weights["RASI"])
cgmFittingProcedure.updateMarkerWeight("LPSI", weights["LPSI"])
cgmFittingProcedure.updateMarkerWeight("RPSI", weights["RPSI"])
cgmFittingProcedure.updateMarkerWeight("RTHI", weights["RTHI"])
cgmFittingProcedure.updateMarkerWeight("RKNE", weights["RKNE"])
cgmFittingProcedure.updateMarkerWeight("RTIB", weights["RTIB"])
cgmFittingProcedure.updateMarkerWeight("RANK", weights["RANK"])
cgmFittingProcedure.updateMarkerWeight("RHEE", weights["RHEE"])
cgmFittingProcedure.updateMarkerWeight("RTOE", weights["RTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHI", weights["LTHI"])
cgmFittingProcedure.updateMarkerWeight("LKNE", weights["LKNE"])
cgmFittingProcedure.updateMarkerWeight("LTIB", weights["LTIB"])
cgmFittingProcedure.updateMarkerWeight("LANK", weights["LANK"])
cgmFittingProcedure.updateMarkerWeight("LHEE", weights["LHEE"])
cgmFittingProcedure.updateMarkerWeight("LTOE", weights["LTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHAP", weights["LTHAP"])
cgmFittingProcedure.updateMarkerWeight("LTHAD", weights["LTHAD"])
cgmFittingProcedure.updateMarkerWeight("LTIAP", weights["LTIAP"])
cgmFittingProcedure.updateMarkerWeight("LTIAD", weights["LTIAD"])
cgmFittingProcedure.updateMarkerWeight("RTHAP", weights["RTHAP"])
cgmFittingProcedure.updateMarkerWeight("RTHAD", weights["RTHAD"])
cgmFittingProcedure.updateMarkerWeight("RTIAP", weights["RTIAP"])
cgmFittingProcedure.updateMarkerWeight("RTIAD", weights["RTIAD"])
cgmFittingProcedure.updateMarkerWeight("LSMH", weights["LSMH"])
cgmFittingProcedure.updateMarkerWeight("LFMH", weights["LFMH"])
cgmFittingProcedure.updateMarkerWeight("LVMH", weights["LVMH"])
cgmFittingProcedure.updateMarkerWeight("RSMH", weights["RSMH"])
cgmFittingProcedure.updateMarkerWeight("RFMH", weights["RFMH"])
cgmFittingProcedure.updateMarkerWeight("RVMH", weights["RVMH"])
# cgmFittingProcedure.updateMarkerWeight("LTHL",weights["LTHL"])
# cgmFittingProcedure.updateMarkerWeight("LTHLD",weights["LTHLD"])
# cgmFittingProcedure.updateMarkerWeight("LPAT",weights["LPAT"])
# cgmFittingProcedure.updateMarkerWeight("LTIBL",weights["LTIBL"])
# cgmFittingProcedure.updateMarkerWeight("RTHL",weights["RTHL"])
# cgmFittingProcedure.updateMarkerWeight("RTHLD",weights["RTHLD"])
# cgmFittingProcedure.updateMarkerWeight("RPAT",weights["RPAT"])
# cgmFittingProcedure.updateMarkerWeight("RTIBL",weights["RTIBL"])
osrf = opensimFilters.opensimFittingFilter(iksetupFile,
scalingOsim,
cgmFittingProcedure,
DATA_PATH,
acqStatic,
accuracy=1e-5)
LOGGER.logger.info(
"-------INVERSE KINEMATICS IN PROGRESS----------")
try:
acqStaticIK = osrf.run(DATA_PATH + calibrateFilenameLabelled,
progressionAxis=progressionAxis,
forwardProgression=forwardProgression)
LOGGER.logger.info("[pyCGM2] - IK solver complete")
except:
LOGGER.logger.error("[pyCGM2] - IK solver fails")
acqStaticIK = acqStatic
detectAnomaly = True
LOGGER.logger.info(
"-----------------------------------------------")
# eventual static acquisition to consider for joint kinematics
finalAcqStatic = acqStaticIK if ik_flag else acqStatic
# --- final pyCGM2 model motion Filter ---
# use fitted markers
modMotionFitted = modelFilters.ModelMotionFilter(
scp, finalAcqStatic, model, enums.motionMethod.Sodervisk)
modMotionFitted.compute()
if "displayCoordinateSystem" in kwargs.keys(
) and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(
csp, model, finalAcqStatic)
csdf.setStatic(False)
csdf.display()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model, finalAcqStatic).compute(
description="vectoriel", pointLabelSuffix=pointSuffix)
modelFilters.ModelAbsoluteAnglesFilter(
model,
finalAcqStatic,
segmentLabels=[
"Left Foot", "Right Foot", "Pelvis", "Thorax", "Head"
],
angleLabels=[
"LFootProgress", "RFootProgress", "Pelvis", "Thorax", "Head"
],
eulerSequences=["TOR", "TOR", "ROT", "YXZ", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
# BSP model
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
modelFilters.CentreOfMassFilter(
model, finalAcqStatic).compute(pointLabelSuffix=pointSuffix)
btkTools.cleanAcq(finalAcqStatic)
if detectAnomaly and not anomalyException:
LOGGER.logger.error(
"Anomalies has been detected - Check Warning messages of the log file"
)
return model, finalAcqStatic, detectAnomaly
def calibrate(DATA_PATH,calibrateFilenameLabelled,translators,weights,
required_mp,optional_mp,
ik_flag,leftFlatFoot,rightFlatFoot,headFlat,
markerDiameter,hjcMethod,
pointSuffix,**kwargs):
"""
Calibration of the CGM2.3
:param DATA_PATH [str]: path to your data
:param calibrateFilenameLabelled [str]: c3d file
:param translators [dict]: translators to apply
:param required_mp [dict]: required anthropometric data
:param optional_mp [dict]: optional anthropometric data (ex: LThighOffset,...)
:param ik_flag [bool]: enable the inverse kinematic solver
:param leftFlatFoot [bool]: enable of the flat foot option for the left foot
:param rightFlatFoot [bool]: enable of the flat foot option for the right foot
:param headFlat [bool]: enable of the head flat option
:param markerDiameter [double]: marker diameter (mm)
:param hjcMethod [str or list of 3 float]: method for locating the hip joint centre
:param pointSuffix [str]: suffix to add to model outputs
"""
# --------------------------STATIC FILE WITH TRANSLATORS --------------------------------------
if "Fitting" in weights.keys():
weights = weights["Fitting"]["Weight"]
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqStatic = kwargs["forceBtkAcq"]
else:
acqStatic = btkTools.smartReader((DATA_PATH+calibrateFilenameLabelled))
btkTools.checkMultipleSubject(acqStatic)
if btkTools.isPointExist(acqStatic,"SACR"):
translators["LPSI"] = "SACR"
translators["RPSI"] = "SACR"
logging.info("[pyCGM2] Sacrum marker detected")
acqStatic = btkTools.applyTranslators(acqStatic,translators)
# ---check marker set used----
dcm = cgm.CGM.detectCalibrationMethods(acqStatic)
# --------------------------MODEL--------------------------------------
# ---definition---
model=cgm2.CGM2_3()
model.configure(acq=acqStatic,detectedCalibrationMethods=dcm)
model.addAnthropoInputParameters(required_mp,optional=optional_mp)
# --store calibration parameters--
model.setStaticFilename(calibrateFilenameLabelled)
model.setCalibrationProperty("leftFlatFoot",leftFlatFoot)
model.setCalibrationProperty("rightFlatFoot",rightFlatFoot)
model.setCalibrationProperty("headFlat",headFlat)
model.setCalibrationProperty("markerDiameter",markerDiameter)
# --------------------------STATIC CALBRATION--------------------------
scp=modelFilters.StaticCalibrationProcedure(model) # load calibration procedure
# ---initial calibration filter----
# use if all optional mp are zero
modelFilters.ModelCalibrationFilter(scp,acqStatic,model,
leftFlatFoot = leftFlatFoot, rightFlatFoot = rightFlatFoot,
headFlat= headFlat,
markerDiameter=markerDiameter,
).compute()
# ---- Decorators -----
decorators.applyBasicDecorators(dcm, model,acqStatic,optional_mp,markerDiameter)
decorators.applyHJCDecorators(model,hjcMethod)
# ----Final Calibration filter if model previously decorated -----
if model.decoratedModel:
# initial static filter
modelFilters.ModelCalibrationFilter(scp,acqStatic,model,
leftFlatFoot = leftFlatFoot, rightFlatFoot = rightFlatFoot,
headFlat= headFlat,
markerDiameter=markerDiameter).compute()
# ----------------------CGM MODELLING----------------------------------
# ----motion filter----
modMotion=modelFilters.ModelMotionFilter(scp,acqStatic,model,enums.motionMethod.Sodervisk,
markerDiameter=markerDiameter)
modMotion.compute()
if "noKinematicsCalculation" in kwargs.keys() and kwargs["noKinematicsCalculation"]:
logging.warning("[pyCGM2] No Kinematic calculation done for the static file")
return model, acqStatic
else:
if model.getBodyPart() == enums.BodyPart.UpperLimb:
ik_flag = False
logging.warning("[pyCGM2] Fitting only applied for the upper limb")
if ik_flag:
# ---OPENSIM IK---
# --- opensim calibration Filter ---
osimfile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\osim\\lowerLimb_ballsJoints.osim" # osimfile
markersetFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_3\\cgm2_3-markerset.xml" # markerset
cgmCalibrationprocedure = opensimFilters.CgmOpensimCalibrationProcedures(model) # procedure
oscf = opensimFilters.opensimCalibrationFilter(osimfile,
model,
cgmCalibrationprocedure,
(DATA_PATH))
oscf.addMarkerSet(markersetFile)
scalingOsim = oscf.build()
# --- opensim Fitting Filter ---
iksetupFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_3\\cgm2_3-ikSetUp_template.xml" # ik tool file
cgmFittingProcedure = opensimFilters.CgmOpensimFittingProcedure(model) # procedure
cgmFittingProcedure.updateMarkerWeight("LASI",weights["LASI"])
cgmFittingProcedure.updateMarkerWeight("RASI",weights["RASI"])
cgmFittingProcedure.updateMarkerWeight("LPSI",weights["LPSI"])
cgmFittingProcedure.updateMarkerWeight("RPSI",weights["RPSI"])
cgmFittingProcedure.updateMarkerWeight("RTHI",weights["RTHI"])
cgmFittingProcedure.updateMarkerWeight("RKNE",weights["RKNE"])
cgmFittingProcedure.updateMarkerWeight("RTIB",weights["RTIB"])
cgmFittingProcedure.updateMarkerWeight("RANK",weights["RANK"])
cgmFittingProcedure.updateMarkerWeight("RHEE",weights["RHEE"])
cgmFittingProcedure.updateMarkerWeight("RTOE",weights["RTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHI",weights["LTHI"])
cgmFittingProcedure.updateMarkerWeight("LKNE",weights["LKNE"])
cgmFittingProcedure.updateMarkerWeight("LTIB",weights["LTIB"])
cgmFittingProcedure.updateMarkerWeight("LANK",weights["LANK"])
cgmFittingProcedure.updateMarkerWeight("LHEE",weights["LHEE"])
cgmFittingProcedure.updateMarkerWeight("LTOE",weights["LTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHAP",weights["LTHAP"])
cgmFittingProcedure.updateMarkerWeight("LTHAD",weights["LTHAD"])
cgmFittingProcedure.updateMarkerWeight("LTIAP",weights["LTIAP"])
cgmFittingProcedure.updateMarkerWeight("LTIAD",weights["LTIAD"])
cgmFittingProcedure.updateMarkerWeight("RTHAP",weights["RTHAP"])
cgmFittingProcedure.updateMarkerWeight("RTHAD",weights["RTHAD"])
cgmFittingProcedure.updateMarkerWeight("RTIAP",weights["RTIAP"])
cgmFittingProcedure.updateMarkerWeight("RTIAD",weights["RTIAD"])
osrf = opensimFilters.opensimFittingFilter(iksetupFile,
scalingOsim,
cgmFittingProcedure,
(DATA_PATH) )
acqStaticIK = osrf.run(acqStatic,(DATA_PATH + calibrateFilenameLabelled ))
# eventual static acquisition to consider for joint kinematics
finalAcqStatic = acqStaticIK if ik_flag else acqStatic
# --- final pyCGM2 model motion Filter ---
# use fitted markers
modMotionFitted=modelFilters.ModelMotionFilter(scp,finalAcqStatic,model,enums.motionMethod.Sodervisk)
modMotionFitted.compute()
if "displayCoordinateSystem" in kwargs.keys() and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(csp,model,finalAcqStatic)
csdf.setStatic(False)
csdf.display()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,finalAcqStatic).compute(description="vectoriel", pointLabelSuffix=pointSuffix)
# detection of traveling axis + absolute angle
if model.m_bodypart != enums.BodyPart.UpperLimb:
pfp = progressionFrame.PelvisProgressionFrameProcedure()
else:
pfp = progressionFrame.ThoraxProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(finalAcqStatic,pfp)
pff.compute()
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
if model.m_bodypart != enums.BodyPart.UpperLimb:
modelFilters.ModelAbsoluteAnglesFilter(model,finalAcqStatic,
segmentLabels=["Left Foot","Right Foot","Pelvis"],
angleLabels=["LFootProgress", "RFootProgress","Pelvis"],
eulerSequences=["TOR","TOR", "ROT"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.LowerLimbTrunk:
modelFilters.ModelAbsoluteAnglesFilter(model,finalAcqStatic,
segmentLabels=["Thorax"],
angleLabels=["Thorax"],
eulerSequences=["YXZ"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.UpperLimb or model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.ModelAbsoluteAnglesFilter(model,finalAcqStatic,
segmentLabels=["Thorax","Head"],
angleLabels=["Thorax", "Head"],
eulerSequences=["YXZ","TOR"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
# BSP model
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
if model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.CentreOfMassFilter(model,finalAcqStatic).compute(pointLabelSuffix=pointSuffix)
return model, finalAcqStatic
def calibrate(DATA_PATH, calibrateFilenameLabelled, translators, required_mp,
optional_mp, leftFlatFoot, rightFlatFoot, headFlat,
markerDiameter, pointSuffix, **kwargs):
"""
Calibration of the CGM1.1
:param DATA_PATH [str]: path to your data
:param calibrateFilenameLabelled [str]: c3d file
:param translators [dict]: translators to apply
:param required_mp [dict]: required anthropometric data
:param optional_mp [dict]: optional anthropometric data (ex: LThighOffset,...)
:param leftFlatFoot [bool]: enable of the flat foot option for the left foot
:param rightFlatFoot [bool]: enable of the flat foot option for the right foot
:param headFlat [bool]: enable of the head flat option
:param markerDiameter [double]: marker diameter (mm)
:param pointSuffix [str]: suffix to add to model outputs
"""
# --------------------------ACQUISITION ------------------------------------
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqStatic = kwargs["forceBtkAcq"]
else:
acqStatic = btkTools.smartReader(
(DATA_PATH + calibrateFilenameLabelled))
btkTools.checkMultipleSubject(acqStatic)
if btkTools.isPointExist(acqStatic, "SACR"):
translators["LPSI"] = "SACR"
translators["RPSI"] = "SACR"
logging.info("[pyCGM2] Sacrum marker detected")
acqStatic = btkTools.applyTranslators(acqStatic, translators)
# ---detectedCalibrationMethods----
dcm = cgm.CGM.detectCalibrationMethods(acqStatic)
# ---definition---
model = cgm.CGM1()
model.setVersion("CGM1.1")
model.configure(acq=acqStatic, detectedCalibrationMethods=dcm)
model.addAnthropoInputParameters(required_mp, optional=optional_mp)
# --store calibration parameters--
model.setStaticFilename(calibrateFilenameLabelled)
model.setCalibrationProperty("leftFlatFoot", leftFlatFoot)
model.setCalibrationProperty("rightFlatFoot", rightFlatFoot)
model.setCalibrationProperty("headFlat", headFlat)
model.setCalibrationProperty("markerDiameter", markerDiameter)
# --------------------------STATIC CALBRATION--------------------------
scp = modelFilters.StaticCalibrationProcedure(
model) # load calibration procedure
# ---initial calibration filter----
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter,
).compute()
# ---- Decorators -----
decorators.applyBasicDecorators(dcm, model, acqStatic, optional_mp,
markerDiameter)
# ----Final Calibration filter if model previously decorated -----
if model.decoratedModel:
# initial static filter
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter).compute()
# ----------------------CGM MODELLING----------------------------------
# ----motion filter----
# notice : viconCGM1compatible option duplicate error on Construction of the foot coordinate system
modMotion = modelFilters.ModelMotionFilter(scp,
acqStatic,
model,
enums.motionMethod.Determinist,
markerDiameter=markerDiameter)
modMotion.compute()
if "displayCoordinateSystem" in kwargs.keys(
) and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(
csp, model, acqStatic)
csdf.setStatic(False)
csdf.display()
if "noKinematicsCalculation" in kwargs.keys(
) and kwargs["noKinematicsCalculation"]:
logging.warning(
"[pyCGM2] No Kinematic calculation done for the static file")
return model, acqStatic
else:
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model, acqStatic).compute(
description="vectoriel", pointLabelSuffix=pointSuffix)
# detection of traveling axis + absolute angle
if model.m_bodypart != enums.BodyPart.UpperLimb:
pfp = progressionFrame.PelvisProgressionFrameProcedure()
else:
pfp = progressionFrame.ThoraxProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqStatic, pfp)
pff.compute()
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
if model.m_bodypart != enums.BodyPart.UpperLimb:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqStatic,
segmentLabels=["Left Foot", "Right Foot", "Pelvis"],
angleLabels=["LFootProgress", "RFootProgress", "Pelvis"],
eulerSequences=["TOR", "TOR", "ROT"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.LowerLimbTrunk:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqStatic,
segmentLabels=["Thorax"],
angleLabels=["Thorax"],
eulerSequences=["YXZ"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.UpperLimb or model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqStatic,
segmentLabels=["Thorax", "Head"],
angleLabels=["Thorax", "Head"],
eulerSequences=["YXZ", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
# BSP model
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
if model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.CentreOfMassFilter(
model, acqStatic).compute(pointLabelSuffix=pointSuffix)
return model, acqStatic
def sara(model, DATA_PATH, reconstructFilenameLabelled, translators, side,
beginFrame, endFrame, **kwargs):
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqFunc = kwargs["forceBtkAcq"]
else:
acqFunc = btkTools.smartReader(
str(DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqFunc)
acqFunc = btkTools.applyTranslators(acqFunc, translators)
#---get frame range of interest---
ff = acqFunc.GetFirstFrame()
lf = acqFunc.GetLastFrame()
start, end = btkTools.getStartEndEvents(acqFunc, side)
if start is not None:
logging.info("Start event detected")
initFrame = start
else:
initFrame = beginFrame if beginFrame is not None else ff
if end is not None:
logging.info("End event detected")
endFrame = end
else:
endFrame = endFrame if endFrame is not None else lf
iff = initFrame - ff
ilf = endFrame - ff
#---motion side of the lower limb---
if side is None:
side = detectSide(acqFunc, "LANK", "RANK")
logging.info("Detected motion side : %s" % (side))
# --------------------------RESET OF THE STATIC File---------
# load btkAcq from static file
staticFilename = model.m_staticFilename
acqStatic = btkTools.smartReader(str(DATA_PATH + staticFilename))
btkTools.checkMultipleSubject(acqStatic)
acqStatic = btkTools.applyTranslators(acqStatic, translators)
# initial calibration ( i.e calibration from Calibration operation)
leftFlatFoot = model.m_properties["CalibrationParameters"]["leftFlatFoot"]
rightFlatFoot = model.m_properties["CalibrationParameters"][
"rightFlatFoot"]
markerDiameter = model.m_properties["CalibrationParameters"][
"markerDiameter"]
headFlat = model.m_properties["CalibrationParameters"]["headFlat"]
if side == "Left":
model.mp_computed["LeftKneeFuncCalibrationOffset"] = 0
if side == "Right":
model.mp_computed["RightKneeFuncCalibrationOffset"] = 0
# initial calibration ( zero previous KneeFunc offset on considered side )
scp = modelFilters.StaticCalibrationProcedure(model)
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter).compute()
if model.version in ["CGM2.3", "CGM2.4", "CGM2.5"]:
if side == "Left":
thigh_markers = model.getSegment("Left Thigh").m_tracking_markers
shank_markers = model.getSegment("Left Shank").m_tracking_markers
elif side == "Right":
thigh_markers = model.getSegment("Right Thigh").m_tracking_markers
shank_markers = model.getSegment("Right Shank").m_tracking_markers
validFrames, vff, vlf = btkTools.findValidFrames(
acqFunc, thigh_markers + shank_markers)
proximalSegmentLabel = str(side + " Thigh")
distalSegmentLabel = str(side + " Shank")
# segment Motion
modMotion = modelFilters.ModelMotionFilter(
scp, acqFunc, model, enums.motionMethod.Sodervisk)
modMotion.segmentalCompute([proximalSegmentLabel, distalSegmentLabel])
# decorator
modelDecorator.KneeCalibrationDecorator(model).sara(
side, indexFirstFrame=iff, indexLastFrame=ilf)
# --------------------------FINAL CALIBRATION OF THE STATIC File---------
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter).compute()
return model, acqFunc, side
def fitting(model, DATA_PATH, reconstructFilenameLabelled, translators,
markerDiameter, pointSuffix, mfpa, momentProjection, **kwargs):
"""
Fitting of the CGM1
:param model [str]: pyCGM2 model previously calibrated
:param DATA_PATH [str]: path to your data
:param reconstructFilenameLabelled [string list]: c3d files
:param translators [dict]: translators to apply
:param mfpa [str]: manual force plate assignement
:param markerDiameter [double]: marker diameter (mm)
:param pointSuffix [str]: suffix to add to model outputs
:param momentProjection [str]: Coordinate system in which joint moment is expressed
"""
# --------------------------ACQUISITION ------------------------------------
if "forceBtkAcq" in kwargs.keys():
acqGait = kwargs["forceBtkAcq"]
else:
# --- btk acquisition ----
acqGait = btkTools.smartReader(
str(DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqGait)
acqGait = btkTools.applyTranslators(acqGait, translators)
trackingMarkers = model.getTrackingMarkers()
validFrames, vff, vlf = btkTools.findValidFrames(acqGait, trackingMarkers)
scp = modelFilters.StaticCalibrationProcedure(model) # procedure
# ---Motion filter----
modMotion = modelFilters.ModelMotionFilter(scp,
acqGait,
model,
enums.motionMethod.Determinist,
markerDiameter=markerDiameter,
viconCGM1compatible=True)
modMotion.compute()
if "displayCoordinateSystem" in kwargs.keys(
) and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(csp, model, acqGait)
csdf.setStatic(False)
csdf.display()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,
acqGait).compute(description="vectoriel",
pointLabelSuffix=pointSuffix)
# detection of traveling axis + absolute angle
if model.m_bodypart != enums.BodyPart.UpperLimb:
longitudinalAxis, forwardProgression, globalFrame = btkTools.findProgressionAxisFromPelvicMarkers(
acqGait, ["LASI", "LPSI", "RASI", "RPSI"])
else:
longitudinalAxis, forwardProgression, globalFrame = btkTools.findProgressionAxisFromLongAxis(
acqGait, "C7", "CLAV")
if model.m_bodypart != enums.BodyPart.UpperLimb:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqGait,
segmentLabels=["Left Foot", "Right Foot", "Pelvis"],
angleLabels=["LFootProgress", "RFootProgress", "Pelvis"],
eulerSequences=["TOR", "TOR", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.LowerLimbTrunk:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqGait,
segmentLabels=["Thorax"],
angleLabels=["Thorax"],
eulerSequences=["YXZ"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.UpperLimb or model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqGait,
segmentLabels=["Thorax", "Head"],
angleLabels=["Thorax", "Head"],
eulerSequences=["YXZ", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
#---- Body segment parameters----
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
#---- CentreOfMass----
if model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.CentreOfMassFilter(
model, acqGait).compute(pointLabelSuffix=pointSuffix)
# Inverse dynamics
if model.m_bodypart != enums.BodyPart.UpperLimb:
# --- force plate handling----
# find foot in contact
mappedForcePlate = forceplates.matchingFootSideOnForceplate(acqGait,
mfpa=mfpa)
forceplates.addForcePlateGeneralEvents(acqGait, mappedForcePlate)
logging.warning("Manual Force plate assignment : %s" %
mappedForcePlate)
# assembly foot and force plate
modelFilters.ForcePlateAssemblyFilter(
model,
acqGait,
mappedForcePlate,
leftSegmentLabel="Left Foot",
rightSegmentLabel="Right Foot").compute()
#---- Joint kinetics----
idp = modelFilters.CGMLowerlimbInverseDynamicProcedure()
modelFilters.InverseDynamicFilter(
model,
acqGait,
procedure=idp,
projection=momentProjection,
viconCGM1compatible=True).compute(pointLabelSuffix=pointSuffix)
#---- Joint energetics----
modelFilters.JointPowerFilter(
model, acqGait).compute(pointLabelSuffix=pointSuffix)
#---- zero unvalid frames ---
btkTools.applyValidFramesOnOutput(acqGait, validFrames)
return acqGait
def fitting(model,DATA_PATH, reconstructFilenameLabelled,
translators,
markerDiameter,
pointSuffix,
mfpa,
momentProjection,**kwargs):
"""
Fitting of the CGM2.1
:param model [str]: pyCGM2 model previously calibrated
:param DATA_PATH [str]: path to your data
:param reconstructFilenameLabelled [string list]: c3d files
:param translators [dict]: translators to apply
:param mfpa [str]: manual force plate assignement
:param markerDiameter [double]: marker diameter (mm)
:param pointSuffix [str]: suffix to add to model outputs
:param momentProjection [str]: Coordinate system in which joint moment is expressed
"""
detectAnomaly = False
if "anomalyException" in kwargs.keys():
anomalyException = kwargs["anomalyException"]
else:
anomalyException=False
# --------------------------ACQUISITION ------------------------------------
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqGait = kwargs["forceBtkAcq"]
else:
acqGait = btkTools.smartReader((DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqGait)
if btkTools.isPointExist(acqGait,"SACR"):
translators["LPSI"] = "SACR"
translators["RPSI"] = "SACR"
LOGGER.logger.info("[pyCGM2] Sacrum marker detected")
acqGait = btkTools.applyTranslators(acqGait,translators)
trackingMarkers = cgm.CGM1.LOWERLIMB_TRACKING_MARKERS + cgm.CGM1.THORAX_TRACKING_MARKERS+ cgm.CGM1.UPPERLIMB_TRACKING_MARKERS
actual_trackingMarkers,phatoms_trackingMarkers = btkTools.createPhantoms(acqGait, trackingMarkers)
vff,vlf = btkTools.getFrameBoundaries(acqGait,actual_trackingMarkers)
if "frameInit" in kwargs.keys() and kwargs["frameInit"] is not None:
vff = kwargs["frameInit"]
LOGGER.logger.info("[pyCGM2] first frame forced to frame [%s]"%(vff))
if "frameEnd" in kwargs.keys() and kwargs["frameEnd"] is not None:
vlf = kwargs["frameEnd"]
LOGGER.logger.info("[pyCGM2] end frame forced to frame [%s]"%(vlf))
flag = btkTools.getValidFrames(acqGait,actual_trackingMarkers,frameBounds=[vff,vlf])
LOGGER.logger.info("[pyCGM2] Computation from frame [%s] to frame [%s]"%(vff,vlf))
# --------------------ANOMALY------------------------------
for marker in actual_trackingMarkers:
if marker not in model.getStaticTrackingMarkers():
LOGGER.logger.warning("[pyCGM2-Anomaly] marker [%s] - not used during static calibration - wrong kinematic for the segment attached to this marker. "%(marker))
# --marker presence
markersets = [cgm.CGM1.LOWERLIMB_TRACKING_MARKERS, cgm.CGM1.THORAX_TRACKING_MARKERS, cgm.CGM1.UPPERLIMB_TRACKING_MARKERS]
for markerset in markersets:
ipdp = InspectorProcedure.MarkerPresenceDetectionProcedure( markerset)
idf = InspectorFilter.InspectorFilter(acqGait,reconstructFilenameLabelled,ipdp)
inspector = idf.run()
# --marker outliers
if inspector["In"] !=[]:
madp = AnomalyDetectionProcedure.MarkerAnomalyDetectionRollingProcedure( inspector["In"], plot=False, window=5,threshold = 3)
adf = AnomalyFilter.AnomalyDetectionFilter(acqGait,reconstructFilenameLabelled,madp, frameRange=[vff,vlf])
anomaly = adf.run()
anomalyIndexes = anomaly["Output"]
if anomaly["ErrorState"]: detectAnomaly = True
if btkTools.checkForcePlateExist(acqGait):
afpp = AnomalyDetectionProcedure.ForcePlateAnomalyProcedure()
adf = AnomalyFilter.AnomalyDetectionFilter(acqGait,reconstructFilenameLabelled,afpp, frameRange=[vff,vlf])
anomaly = adf.run()
if anomaly["ErrorState"]: detectAnomaly = True
if detectAnomaly and anomalyException:
raise Exception ("Anomalies has been detected - Check Warning message of the log file")
# --------------------MODELLING------------------------------
# filtering
# -----------------------
if "fc_lowPass_marker" in kwargs.keys() and kwargs["fc_lowPass_marker"]!=0 :
fc = kwargs["fc_lowPass_marker"]
order = 4
if "order_lowPass_marker" in kwargs.keys():
order = kwargs["order_lowPass_marker"]
signal_processing.markerFiltering(acqGait,trackingMarkers,order=order, fc =fc)
if "fc_lowPass_forcePlate" in kwargs.keys() and kwargs["fc_lowPass_forcePlate"]!=0 :
fc = kwargs["fc_lowPass_forcePlate"]
order = 4
if "order_lowPass_forcePlate" in kwargs.keys():
order = kwargs["order_lowPass_forcePlate"]
signal_processing.forcePlateFiltering(acqGait,order=order, fc =fc)
scp=modelFilters.StaticCalibrationProcedure(model)
# ---Motion filter----
modMotion=modelFilters.ModelMotionFilter(scp,acqGait,model,enums.motionMethod.Determinist,
markerDiameter=markerDiameter)
modMotion.compute()
progressionFlag = False
if btkTools.isPointExist(acqGait, 'LHEE',ignorePhantom=False) or btkTools.isPointExist(acqGait, 'RHEE',ignorePhantom=False):
pfp = progressionFrame.PointProgressionFrameProcedure(marker="LHEE") \
if btkTools.isPointExist(acqGait, 'LHEE',ignorePhantom=False) \
else progressionFrame.PointProgressionFrameProcedure(marker="RHEE")
pff = progressionFrame.ProgressionFrameFilter(acqGait,pfp)
pff.compute()
progressionAxis = pff.outputs["progressionAxis"]
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
progressionFlag = True
elif btkTools.isPointsExist(acqGait, ['LASI', 'RASI', 'RPSI', 'LPSI'],ignorePhantom=False) and not progressionFlag:
LOGGER.logger.info("[pyCGM2] - progression axis detected from Pelvic markers ")
pfp = progressionFrame.PelvisProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqGait,pfp)
pff.compute()
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
progressionFlag = True
elif btkTools.isPointsExist(acqGait, ['C7', 'T10', 'CLAV', 'STRN'],ignorePhantom=False) and not progressionFlag:
LOGGER.logger.info("[pyCGM2] - progression axis detected from Thoracic markers ")
pfp = progressionFrame.ThoraxProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqGait,pfp)
pff.compute()
progressionAxis = pff.outputs["progressionAxis"]
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
else:
globalFrame = "XYZ"
progressionAxis = "X"
forwardProgression = True
LOGGER.logger.error("[pyCGM2] - impossible to detect progression axis - neither pelvic nor thoracic markers are present. Progression set to +X by default ")
if "displayCoordinateSystem" in kwargs.keys() and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(csp,model,acqGait)
csdf.setStatic(False)
csdf.display()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,acqGait).compute(description="vectoriel", pointLabelSuffix=pointSuffix)
modelFilters.ModelAbsoluteAnglesFilter(model,acqGait,
segmentLabels=["Left Foot","Right Foot","Pelvis","Thorax","Head"],
angleLabels=["LFootProgress", "RFootProgress","Pelvis","Thorax", "Head"],
eulerSequences=["TOR","TOR", "ROT","YXZ","TOR"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
#---- Body segment parameters----
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
modelFilters.CentreOfMassFilter(model,acqGait).compute(pointLabelSuffix=pointSuffix)
# Inverse dynamics
if btkTools.checkForcePlateExist(acqGait):
if model.m_bodypart != enums.BodyPart.UpperLimb:
# --- force plate handling----
# find foot in contact
mappedForcePlate = forceplates.matchingFootSideOnForceplate(acqGait,mfpa=mfpa)
forceplates.addForcePlateGeneralEvents(acqGait,mappedForcePlate)
LOGGER.logger.info("Manual Force plate assignment : %s" %mappedForcePlate)
# assembly foot and force plate
modelFilters.ForcePlateAssemblyFilter(model,acqGait,mappedForcePlate,
leftSegmentLabel="Left Foot",
rightSegmentLabel="Right Foot").compute(pointLabelSuffix=pointSuffix)
#---- Joint kinetics----
idp = modelFilters.CGMLowerlimbInverseDynamicProcedure()
modelFilters.InverseDynamicFilter(model,
acqGait,
procedure = idp,
projection = momentProjection,
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression
).compute(pointLabelSuffix=pointSuffix)
#---- Joint energetics----
modelFilters.JointPowerFilter(model,acqGait).compute(pointLabelSuffix=pointSuffix)
btkTools.cleanAcq(acqGait)
btkTools.applyOnValidFrames(acqGait,flag)
if detectAnomaly and not anomalyException:
LOGGER.logger.error("Anomalies has been detected - Check Warning messages of the log file")
return acqGait,detectAnomaly
def test_scenario2Test(self):
"""
the pyCGM2 translator is IN the c3d. it points to your own label which is NOT a pyCGM2 translator list
( e.g : LTHI points to LTHLD)
return:
the translator and your own markers point to similar values (e.g LTHI amd LTHD point same values)
a new marker suffixed with _origin for keeping a trace of the translator found in the c3d ( eg LTHi renamed LTHI_origin )
"""
contents24 = """
Translators:
LASI: None
RASI: None
LPSI: None
RPSI: None
RTHI: None
RKNE: None
RTIAP: None
RTIAD: None
RTIB: None
RANK: None
RTIAP: None
RTIAD: None
RHEE: None
RSMH: None
RTOE: None
RFMH: None
RVMH: None
LTHI: LTHLD
LKNE: None
LTHAP: None
LTHAD: None
LTIB: None
LANK: None
LTIAP: None
LTIAD: None
LHEE: None
LSMH: None
LTOE: None
LFMH: None
LVMH: None
RKNM: None
LKNM: None
RMED: None
LMED: None
C7: None
T10: None
CLAV: None
STRN: None
LFHD: None
LBHD: None
RFHD: None
RBHD: None
LSHO: None
LELB: None
LWRB: None
LWRA: None
LFIN: None
RSHO: None
RELB: None
RWRB: None
RWRA: None
RFIN: None
"""
translators = files.readContent(contents24)
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "LowLevel\\translators\\scenario2\\"
staticFilename = "staticAlana.c3d"
DATA_PATH_OUT = pyCGM2.TEST_DATA_PATH_OUT + "LowLevel\\translators\\scenario2\\"
files.createDir(DATA_PATH_OUT)
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
acqStatic2 = btkTools.applyTranslators(acqStatic,
translators["Translators"])
btkTools.smartWriter(acqStatic2, DATA_PATH_OUT + "scenario2Test.c3d")
np.testing.assert_equal(
acqStatic2.GetPoint(utils.str("LTHI")).GetValues(),
acqStatic2.GetPoint(utils.str("LTHLD")).GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint(utils.str("LTHI_origin")).GetValues(),
acqStatic.GetPoint(utils.str("LTHI")).GetValues())
def calibrate(DATA_PATH,calibrateFilenameLabelled,translators,
required_mp,optional_mp,
leftFlatFoot,rightFlatFoot,headFlat,
markerDiameter,hjcMethod,
pointSuffix,**kwargs):
"""
Calibration of the CGM2.1
:param DATA_PATH [str]: path to your data
:param calibrateFilenameLabelled [str]: c3d file
:param translators [dict]: translators to apply
:param required_mp [dict]: required anthropometric data
:param optional_mp [dict]: optional anthropometric data (ex: LThighOffset,...)
:param leftFlatFoot [bool]: enable of the flat foot option for the left foot
:param rightFlatFoot [bool]: enable of the flat foot option for the right foot
:param headFlat [bool]: enable of the head flat option
:param markerDiameter [double]: marker diameter (mm)
:param hjcMethod [str or list of 3 float]: method for locating the hip joint centre
:param pointSuffix [str]: suffix to add to model outputs
"""
detectAnomaly = False
if "anomalyException" in kwargs.keys():
anomalyException = kwargs["anomalyException"]
else:
anomalyException=False
# --------------------------ACQUISITION ------------------------------------
# ---btk acquisition---
if "forceBtkAcq" in kwargs.keys():
acqStatic = kwargs["forceBtkAcq"]
else:
acqStatic = btkTools.smartReader((DATA_PATH+calibrateFilenameLabelled))
btkTools.checkMultipleSubject(acqStatic)
if btkTools.isPointExist(acqStatic,"SACR"):
translators["LPSI"] = "SACR"
translators["RPSI"] = "SACR"
LOGGER.logger.info("[pyCGM2] Sacrum marker detected")
acqStatic = btkTools.applyTranslators(acqStatic,translators)
trackingMarkers = cgm.CGM1.LOWERLIMB_TRACKING_MARKERS + cgm.CGM1.THORAX_TRACKING_MARKERS+ cgm.CGM1.UPPERLIMB_TRACKING_MARKERS
actual_trackingMarkers,phatoms_trackingMarkers = btkTools.createPhantoms(acqStatic, trackingMarkers)
vff = acqStatic.GetFirstFrame()
vlf = acqStatic.GetLastFrame()
# vff,vlf = btkTools.getFrameBoundaries(acqStatic,actual_trackingMarkers)
flag = btkTools.getValidFrames(acqStatic,actual_trackingMarkers,frameBounds=[vff,vlf])
gapFlag = btkTools.checkGap(acqStatic,actual_trackingMarkers,frameBounds=[vff,vlf])
if gapFlag:
raise Exception("[pyCGM2] Calibration aborted. Gap find during interval [%i-%i]. Crop your c3d " %(vff,vlf))
# --------------------ANOMALY------------------------------
# --Check MP
adap = AnomalyDetectionProcedure.AnthropoDataAnomalyProcedure( required_mp)
adf = AnomalyFilter.AnomalyDetectionFilter(None,None,adap)
mp_anomaly = adf.run()
if mp_anomaly["ErrorState"]: detectAnomaly = True
# --marker presence
markersets = [cgm.CGM1.LOWERLIMB_TRACKING_MARKERS, cgm.CGM1.THORAX_TRACKING_MARKERS, cgm.CGM1.UPPERLIMB_TRACKING_MARKERS]
for markerset in markersets:
ipdp = InspectorProcedure.MarkerPresenceDetectionProcedure( markerset)
idf = InspectorFilter.InspectorFilter(acqStatic,calibrateFilenameLabelled,ipdp)
inspector = idf.run()
# # --marker outliers
if inspector["In"] !=[]:
madp = AnomalyDetectionProcedure.MarkerAnomalyDetectionRollingProcedure(inspector["In"], plot=False, window=4,threshold = 3)
adf = AnomalyFilter.AnomalyDetectionFilter(acqStatic,calibrateFilenameLabelled,madp)
anomaly = adf.run()
anomalyIndexes = anomaly["Output"]
if anomaly["ErrorState"]: detectAnomaly = True
if detectAnomaly and anomalyException:
raise Exception ("Anomalies has been detected - Check Warning message of the log file")
# --------------------MODELLING------------------------------
# ---check marker set used----
dcm = cgm.CGM.detectCalibrationMethods(acqStatic)
# ---definition---
model=cgm2.CGM2_1()
model.configure(detectedCalibrationMethods=dcm)
model.addAnthropoInputParameters(required_mp,optional=optional_mp)
if dcm["Left Knee"] == enums.JointCalibrationMethod.KAD: actual_trackingMarkers.append("LKNE")
if dcm["Right Knee"] == enums.JointCalibrationMethod.KAD: actual_trackingMarkers.append("RKNE")
model.setStaticTrackingMarkers(actual_trackingMarkers)
# --store calibration parameters--
model.setStaticFilename(calibrateFilenameLabelled)
model.setCalibrationProperty("leftFlatFoot",leftFlatFoot)
model.setCalibrationProperty("rightFlatFoot",rightFlatFoot)
model.setCalibrationProperty("headFlat",headFlat)
model.setCalibrationProperty("markerDiameter",markerDiameter)
# --------------------------STATIC CALBRATION--------------------------
scp=modelFilters.StaticCalibrationProcedure(model) # load calibration procedure
# ---initial calibration filter----
# use if all optional mp are zero
modelFilters.ModelCalibrationFilter(scp,acqStatic,model,
leftFlatFoot = leftFlatFoot, rightFlatFoot = rightFlatFoot,
headFlat= headFlat,
markerDiameter=markerDiameter,
).compute()
# ---- Decorators -----
decorators.applyBasicDecorators(dcm, model,acqStatic,optional_mp,markerDiameter)
decorators.applyHJCDecorators(model,hjcMethod)
# ----Final Calibration filter if model previously decorated -----
if model.decoratedModel:
# initial static filter
modelFilters.ModelCalibrationFilter(scp,acqStatic,model,
leftFlatFoot = leftFlatFoot,
rightFlatFoot = rightFlatFoot,
markerDiameter=markerDiameter,
headFlat= headFlat,
).compute()
modMotion=modelFilters.ModelMotionFilter(scp,acqStatic,model,enums.motionMethod.Determinist,
markerDiameter=markerDiameter)
modMotion.compute()
# ----progression Frame----
progressionFlag = False
if btkTools.isPointsExist(acqStatic, ['LASI', 'RASI', 'RPSI', 'LPSI'],ignorePhantom=False):
LOGGER.logger.info("[pyCGM2] - progression axis detected from Pelvic markers ")
pfp = progressionFrame.PelvisProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqStatic,pfp)
pff.compute()
progressionAxis = pff.outputs["progressionAxis"]
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
progressionFlag = True
elif btkTools.isPointsExist(acqStatic, ['C7', 'T10', 'CLAV', 'STRN'],ignorePhantom=False) and not progressionFlag:
LOGGER.logger.info("[pyCGM2] - progression axis detected from Thoracic markers ")
pfp = progressionFrame.ThoraxProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqStatic,pfp)
pff.compute()
progressionAxis = pff.outputs["progressionAxis"]
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
else:
globalFrame = "XYZ"
progressionAxis = "X"
forwardProgression = True
LOGGER.logger.error("[pyCGM2] - impossible to detect progression axis - neither pelvic nor thoracic markers are present. Progression set to +X by default ")
if "displayCoordinateSystem" in kwargs.keys() and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(csp,model,acqStatic)
csdf.setStatic(False)
csdf.display()
# ----------------------CGM MODELLING----------------------------------
# ----motion filter----
# notice : viconCGM1compatible option duplicate error on Construction of the foot coordinate system
if "noKinematicsCalculation" in kwargs.keys() and kwargs["noKinematicsCalculation"]:
LOGGER.logger.warning("[pyCGM2] No Kinematic calculation done for the static file")
return model, acqStatic
else:
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,acqStatic).compute(description="vectoriel", pointLabelSuffix=pointSuffix)
modelFilters.ModelAbsoluteAnglesFilter(model,acqStatic,
segmentLabels=["Left Foot","Right Foot","Pelvis","Thorax","Head"],
angleLabels=["LFootProgress", "RFootProgress","Pelvis","Thorax", "Head"],
eulerSequences=["TOR","TOR", "ROT","YXZ","TOR"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
# BSP model
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
modelFilters.CentreOfMassFilter(model,acqStatic).compute(pointLabelSuffix=pointSuffix)
btkTools.cleanAcq(acqStatic)
if detectAnomaly and not anomalyException:
LOGGER.logger.error("Anomalies has been detected - Check Warning messages of the log file")
return model, acqStatic,detectAnomaly
def calibration2Dof(model, DATA_PATH, reconstructFilenameLabelled, translators,
side, beginFrame, endFrame, jointRange):
acqFunc = btkTools.smartReader(str(DATA_PATH +
reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqFunc)
acqFunc = btkTools.applyTranslators(acqFunc, translators)
#---get frame range of interest---
ff = acqFunc.GetFirstFrame()
lf = acqFunc.GetLastFrame()
initFrame = beginFrame if beginFrame is not None else ff
endFrame = endFrame if endFrame is not None else lf
iff = initFrame - ff
ilf = endFrame - ff
# motion
if side is None:
side = detectSide(acqFunc, "LANK", "RANK")
logging.info("Detected motion side : %s" % (side))
if model.version in ["CGM1.0", "CGM1.1", "CGM2.1", "CGM2.2", "CGM2.2e"]:
validFrames, vff, vlf = btkTools.findValidFrames(
acqFunc, cgm.CGM1LowerLimbs.TRACKING_MARKERS)
# --------------------------RESET OF THE STATIC File---------
# load btkAcq from static file
staticFilename = model.m_staticFilename
acqStatic = btkTools.smartReader(str(DATA_PATH + staticFilename))
btkTools.checkMultipleSubject(acqStatic)
acqStatic = btkTools.applyTranslators(acqStatic, translators)
# initial calibration ( i.e calibration from Calibration operation)
leftFlatFoot = model.m_properties["CalibrationParameters"]["leftFlatFoot"]
rightFlatFoot = model.m_properties["CalibrationParameters"][
"rightFlatFoot"]
markerDiameter = model.m_properties["CalibrationParameters"][
"markerDiameter"]
if side == "Left":
# remove other functional calibration
model.mp_computed["LeftKneeFuncCalibrationOffset"] = 0
if side == "Right":
# remove other functional calibration
model.mp_computed["RightKneeFuncCalibrationOffset"] = 0
# no rotation on both thigh - re init anatonical frame
scp = modelFilters.StaticCalibrationProcedure(model)
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
markerDiameter=markerDiameter).compute()
if model.version in ["CGM1.0", "CGM1.1", "CGM2.1", "CGM2.2", "CGM2.2e"]:
modMotion = modelFilters.ModelMotionFilter(
scp, acqFunc, model, enums.motionMethod.Determinist)
modMotion.compute()
elif model.version in ["CGM2.3", "CGM2.3e", "CGM2.4", "CGM2.4e"]:
if side == "Left":
thigh_markers = model.getSegment("Left Thigh").m_tracking_markers
shank_markers = model.getSegment("Left Shank").m_tracking_markers
elif side == "Right":
thigh_markers = model.getSegment("Right Thigh").m_tracking_markers
shank_markers = model.getSegment("Right Shank").m_tracking_markers
validFrames, vff, vlf = btkTools.findValidFrames(
acqFunc, thigh_markers + shank_markers)
proximalSegmentLabel = str(side + " Thigh")
distalSegmentLabel = str(side + " Shank")
# Motion
modMotion = modelFilters.ModelMotionFilter(
scp, acqFunc, model, enums.motionMethod.Sodervisk)
modMotion.segmentalCompute([proximalSegmentLabel, distalSegmentLabel])
# calibration decorators
modelDecorator.KneeCalibrationDecorator(model).calibrate2dof(
side, indexFirstFrame=iff, indexLastFrame=ilf, jointRange=jointRange)
# --------------------------FINAL CALIBRATION OF THE STATIC File---------
# ---- Calibration
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
markerDiameter=markerDiameter).compute()
return model, acqFunc, side
def fitting(model, DATA_PATH, reconstructFilenameLabelled, translators,
weights, ik_flag, markerDiameter, pointSuffix, mfpa,
momentProjection, **kwargs):
"""
Fitting of the CGM2.5
:param model [str]: pyCGM2 model previously calibrated
:param DATA_PATH [str]: path to your data
:param reconstructFilenameLabelled [string list]: c3d files
:param translators [dict]: translators to apply
:param ik_flag [bool]: enable the inverse kinematic solver
:param mfpa [str]: manual force plate assignement
:param markerDiameter [double]: marker diameter (mm)
:param pointSuffix [str]: suffix to add to model outputs
:param momentProjection [str]: Coordinate system in which joint moment is expressed
"""
detectAnomaly = False
if "anomalyException" in kwargs.keys():
anomalyException = kwargs["anomalyException"]
else:
anomalyException = False
if "forceFoot6DoF" in kwargs.keys() and kwargs["forceFoot6DoF"]:
forceFoot6DoF_flag = True
else:
forceFoot6DoF_flag = False
if "Fitting" in weights.keys():
weights = weights["Fitting"]["Weight"]
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqGait = kwargs["forceBtkAcq"]
else:
acqGait = btkTools.smartReader(
(DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqGait)
if btkTools.isPointExist(acqGait, "SACR"):
translators["LPSI"] = "SACR"
translators["RPSI"] = "SACR"
LOGGER.logger.info("[pyCGM2] Sacrum marker detected")
acqGait = btkTools.applyTranslators(acqGait, translators)
trackingMarkers = cgm2.CGM2_5.LOWERLIMB_TRACKING_MARKERS + cgm2.CGM2_5.THORAX_TRACKING_MARKERS + cgm2.CGM2_5.UPPERLIMB_TRACKING_MARKERS
actual_trackingMarkers, phatoms_trackingMarkers = btkTools.createPhantoms(
acqGait, trackingMarkers)
vff, vlf = btkTools.getFrameBoundaries(acqGait, actual_trackingMarkers)
if "frameInit" in kwargs.keys() and kwargs["frameInit"] is not None:
vff = kwargs["frameInit"]
LOGGER.logger.info("[pyCGM2] first frame forced to frame [%s]" %
(vff))
if "frameEnd" in kwargs.keys() and kwargs["frameEnd"] is not None:
vlf = kwargs["frameEnd"]
LOGGER.logger.info("[pyCGM2] end frame forced to frame [%s]" % (vlf))
flag = btkTools.getValidFrames(acqGait,
actual_trackingMarkers,
frameBounds=[vff, vlf])
LOGGER.logger.info("[pyCGM2] Computation from frame [%s] to frame [%s]" %
(vff, vlf))
# --------------------ANOMALY------------------------------
for marker in actual_trackingMarkers:
if marker not in model.getStaticTrackingMarkers():
LOGGER.logger.warning(
"[pyCGM2-Anomaly] marker [%s] - not used during static calibration - wrong kinematic for the segment attached to this marker. "
% (marker))
# --marker presence
markersets = [
cgm2.CGM2_5.LOWERLIMB_TRACKING_MARKERS,
cgm2.CGM2_5.THORAX_TRACKING_MARKERS,
cgm2.CGM2_5.UPPERLIMB_TRACKING_MARKERS
]
for markerset in markersets:
ipdp = InspectorProcedure.MarkerPresenceDetectionProcedure(markerset)
idf = InspectorFilter.InspectorFilter(acqGait,
reconstructFilenameLabelled,
ipdp)
inspector = idf.run()
# --marker outliers
if inspector["In"] != []:
madp = AnomalyDetectionProcedure.MarkerAnomalyDetectionRollingProcedure(
inspector["In"], plot=False, window=5, threshold=3)
adf = AnomalyFilter.AnomalyDetectionFilter(
acqGait,
reconstructFilenameLabelled,
madp,
frameRange=[vff, vlf])
anomaly = adf.run()
anomalyIndexes = anomaly["Output"]
if anomaly["ErrorState"]: detectAnomaly = True
if btkTools.checkForcePlateExist(acqGait):
afpp = AnomalyDetectionProcedure.ForcePlateAnomalyProcedure()
adf = AnomalyFilter.AnomalyDetectionFilter(acqGait,
reconstructFilenameLabelled,
afpp,
frameRange=[vff, vlf])
anomaly = adf.run()
if anomaly["ErrorState"]: detectAnomaly = True
if detectAnomaly and anomalyException:
raise Exception(
"Anomalies has been detected - Check Warning message of the log file"
)
# --------------------MODELLING------------------------------
# filtering
# -----------------------
if "fc_lowPass_marker" in kwargs.keys(
) and kwargs["fc_lowPass_marker"] != 0:
fc = kwargs["fc_lowPass_marker"]
order = 4
if "order_lowPass_marker" in kwargs.keys():
order = kwargs["order_lowPass_marker"]
signal_processing.markerFiltering(acqGait,
trackingMarkers,
order=order,
fc=fc)
if "fc_lowPass_forcePlate" in kwargs.keys(
) and kwargs["fc_lowPass_forcePlate"] != 0:
fc = kwargs["fc_lowPass_forcePlate"]
order = 4
if "order_lowPass_forcePlate" in kwargs.keys():
order = kwargs["order_lowPass_forcePlate"]
signal_processing.forcePlateFiltering(acqGait, order=order, fc=fc)
# --- initial motion Filter ---
scp = modelFilters.StaticCalibrationProcedure(model)
modMotion = modelFilters.ModelMotionFilter(scp, acqGait, model,
enums.motionMethod.Sodervisk)
modMotion.compute()
progressionFlag = False
if btkTools.isPointExist(acqGait, 'LHEE',
ignorePhantom=False) or btkTools.isPointExist(
acqGait, 'RHEE', ignorePhantom=False):
pfp = progressionFrame.PointProgressionFrameProcedure(marker="LHEE") \
if btkTools.isPointExist(acqGait, 'LHEE',ignorePhantom=False) \
else progressionFrame.PointProgressionFrameProcedure(marker="RHEE")
pff = progressionFrame.ProgressionFrameFilter(acqGait, pfp)
pff.compute()
progressionAxis = pff.outputs["progressionAxis"]
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
progressionFlag = True
elif btkTools.isPointsExist(acqGait, ['LASI', 'RASI', 'RPSI', 'LPSI'],
ignorePhantom=False) and not progressionFlag:
LOGGER.logger.info(
"[pyCGM2] - progression axis detected from Pelvic markers ")
pfp = progressionFrame.PelvisProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqGait, pfp)
pff.compute()
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
progressionFlag = True
elif btkTools.isPointsExist(acqGait, ['C7', 'T10', 'CLAV', 'STRN'],
ignorePhantom=False) and not progressionFlag:
LOGGER.logger.info(
"[pyCGM2] - progression axis detected from Thoracic markers ")
pfp = progressionFrame.ThoraxProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqGait, pfp)
pff.compute()
progressionAxis = pff.outputs["progressionAxis"]
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
else:
globalFrame = "XYZ"
progressionAxis = "X"
forwardProgression = True
LOGGER.logger.error(
"[pyCGM2] - impossible to detect progression axis - neither pelvic nor thoracic markers are present. Progression set to +X by default "
)
for target in weights.keys():
if target not in actual_trackingMarkers or target not in model.getStaticIkTargets(
):
weights[target] = 0
LOGGER.logger.warning(
"[pyCGM2] - the IK targeted marker [%s] is not labelled in the acquisition [%s]"
% (target, reconstructFilenameLabelled))
if ik_flag:
# ---OPENSIM IK---
# --- opensim calibration Filter ---
osimfile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\osim\\lowerLimb_ballsJoints.osim" # osimfile
markersetFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_4\\cgm2_4-markerset.xml" # markerset
cgmCalibrationprocedure = opensimFilters.CgmOpensimCalibrationProcedures(
model) # procedure
oscf = opensimFilters.opensimCalibrationFilter(
osimfile, model, cgmCalibrationprocedure, DATA_PATH)
oscf.addMarkerSet(markersetFile)
scalingOsim = oscf.build()
# --- opensim Fitting Filter ---
iksetupFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_4\\cgm2_4-ikSetUp_template.xml" # ik tl file
cgmFittingProcedure = opensimFilters.CgmOpensimFittingProcedure(
model) # procedure
cgmFittingProcedure.updateMarkerWeight("LASI", weights["LASI"])
cgmFittingProcedure.updateMarkerWeight("RASI", weights["RASI"])
cgmFittingProcedure.updateMarkerWeight("LPSI", weights["LPSI"])
cgmFittingProcedure.updateMarkerWeight("RPSI", weights["RPSI"])
cgmFittingProcedure.updateMarkerWeight("RTHI", weights["RTHI"])
cgmFittingProcedure.updateMarkerWeight("RKNE", weights["RKNE"])
cgmFittingProcedure.updateMarkerWeight("RTIB", weights["RTIB"])
cgmFittingProcedure.updateMarkerWeight("RANK", weights["RANK"])
cgmFittingProcedure.updateMarkerWeight("RHEE", weights["RHEE"])
cgmFittingProcedure.updateMarkerWeight("RTOE", weights["RTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHI", weights["LTHI"])
cgmFittingProcedure.updateMarkerWeight("LKNE", weights["LKNE"])
cgmFittingProcedure.updateMarkerWeight("LTIB", weights["LTIB"])
cgmFittingProcedure.updateMarkerWeight("LANK", weights["LANK"])
cgmFittingProcedure.updateMarkerWeight("LHEE", weights["LHEE"])
cgmFittingProcedure.updateMarkerWeight("LTOE", weights["LTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHAP", weights["LTHAP"])
cgmFittingProcedure.updateMarkerWeight("LTHAD", weights["LTHAD"])
cgmFittingProcedure.updateMarkerWeight("LTIAP", weights["LTIAP"])
cgmFittingProcedure.updateMarkerWeight("LTIAD", weights["LTIAD"])
cgmFittingProcedure.updateMarkerWeight("RTHAP", weights["RTHAP"])
cgmFittingProcedure.updateMarkerWeight("RTHAD", weights["RTHAD"])
cgmFittingProcedure.updateMarkerWeight("RTIAP", weights["RTIAP"])
cgmFittingProcedure.updateMarkerWeight("RTIAD", weights["RTIAD"])
cgmFittingProcedure.updateMarkerWeight("LSMH", weights["LSMH"])
cgmFittingProcedure.updateMarkerWeight("LFMH", weights["LFMH"])
cgmFittingProcedure.updateMarkerWeight("LVMH", weights["LVMH"])
cgmFittingProcedure.updateMarkerWeight("RSMH", weights["RSMH"])
cgmFittingProcedure.updateMarkerWeight("RFMH", weights["RFMH"])
cgmFittingProcedure.updateMarkerWeight("RVMH", weights["RVMH"])
# cgmFittingProcedure.updateMarkerWeight("LTHL",weights["LTHL"])
# cgmFittingProcedure.updateMarkerWeight("LTHLD",weights["LTHLD"])
# cgmFittingProcedure.updateMarkerWeight("LPAT",weights["LPAT"])
# cgmFittingProcedure.updateMarkerWeight("LTIBL",weights["LTIBL"])
# cgmFittingProcedure.updateMarkerWeight("RTHL",weights["RTHL"])
# cgmFittingProcedure.updateMarkerWeight("RTHLD",weights["RTHLD"])
# cgmFittingProcedure.updateMarkerWeight("RPAT",weights["RPAT"])
# cgmFittingProcedure.updateMarkerWeight("RTIBL",weights["RTIBL"])
osrf = opensimFilters.opensimFittingFilter(iksetupFile, scalingOsim,
cgmFittingProcedure,
DATA_PATH, acqGait)
osrf.setTimeRange(acqGait, beginFrame=vff, lastFrame=vlf)
if "ikAccuracy" in kwargs.keys():
osrf.setAccuracy(kwargs["ikAccuracy"])
LOGGER.logger.info("-------INVERSE KINEMATICS IN PROGRESS----------")
try:
acqIK = osrf.run(DATA_PATH + reconstructFilenameLabelled,
progressionAxis=progressionAxis,
forwardProgression=forwardProgression)
LOGGER.logger.info("[pyCGM2] - IK solver complete")
except:
LOGGER.logger.error("[pyCGM2] - IK solver fails")
acqIK = acqGait
detectAnomaly = True
LOGGER.logger.info(
"---------------------------------------------------")
# eventual gait acquisition to consider for joint kinematics
finalAcqGait = acqIK if ik_flag else acqGait
if "displayCoordinateSystem" in kwargs.keys(
) and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(
csp, model, finalAcqGait)
csdf.setStatic(False)
csdf.display()
# --- final pyCGM2 model motion Filter ---
# use fitted markers
modMotionFitted = modelFilters.ModelMotionFilter(
scp,
finalAcqGait,
model,
enums.motionMethod.Sodervisk,
markerDiameter=markerDiameter,
forceFoot6DoF=forceFoot6DoF_flag)
modMotionFitted.compute()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model, finalAcqGait).compute(
description="vectoriel", pointLabelSuffix=pointSuffix)
modelFilters.ModelAbsoluteAnglesFilter(
model,
finalAcqGait,
segmentLabels=["Left Foot", "Right Foot", "Pelvis", "Thorax", "Head"],
angleLabels=[
"LFootProgress", "RFootProgress", "Pelvis", "Thorax", "Head"
],
eulerSequences=["TOR", "TOR", "ROT", "YXZ", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
#---- Body segment parameters----
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
modelFilters.CentreOfMassFilter(
model, finalAcqGait).compute(pointLabelSuffix=pointSuffix)
# Inverse dynamics
if btkTools.checkForcePlateExist(acqGait):
# --- force plate handling----
# find foot in contact
mappedForcePlate = forceplates.matchingFootSideOnForceplate(
finalAcqGait, mfpa=mfpa)
forceplates.addForcePlateGeneralEvents(finalAcqGait, mappedForcePlate)
LOGGER.logger.warning("Manual Force plate assignment : %s" %
mappedForcePlate)
# assembly foot and force plate
modelFilters.ForcePlateAssemblyFilter(
model,
finalAcqGait,
mappedForcePlate,
leftSegmentLabel="Left Foot",
rightSegmentLabel="Right Foot").compute(
pointLabelSuffix=pointSuffix)
#---- Joint kinetics----
idp = modelFilters.CGMLowerlimbInverseDynamicProcedure()
modelFilters.InverseDynamicFilter(
model,
finalAcqGait,
procedure=idp,
projection=momentProjection,
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
#---- Joint energetics----
modelFilters.JointPowerFilter(
model, finalAcqGait).compute(pointLabelSuffix=pointSuffix)
#---- zero unvalid frames ---
btkTools.cleanAcq(finalAcqGait)
btkTools.applyOnValidFrames(finalAcqGait, flag)
if detectAnomaly and not anomalyException:
LOGGER.logger.error(
"Anomalies has been detected - Check Warning messages of the log file"
)
return finalAcqGait, detectAnomaly
def scenario1Test(cls):
"""
basic test.
the pyCGM2 marker is not in the c3d. it points to you own label which is not a pyCGM2 marker
( e.g : LASI points to LeftASI)
return:
=> own markers and pyGM2 markers are both IN the final c3d
"""
contents24 = """
Translators:
LASI: LeftASI
RASI: RightASI
LPSI: LeftPSI
RPSI: RightPSI
RTHI: None
RKNE: None
RTIAP: None
RTIAD: None
RTIB: None
RANK: None
RTIAP: None
RTIAD: None
RHEE: None
RSMH: None
RTOE: None
RFMH: None
RVMH: None
LTHI: None
LKNE: None
LTHAP: None
LTHAD: None
LTIB: None
LANK: None
LTIAP: None
LTIAD: None
LHEE: None
LSMH: None
LTOE: None
LFMH: None
LVMH: None
RKNM: None
LKNM: None
RMED: None
LMED: None
C7: None
T10: None
CLAV: None
STRN: None
LFHD: None
LBHD: None
RFHD: None
RBHD: None
LSHO: None
LELB: None
LWRB: None
LWRA: None
LFIN: None
RSHO: None
RELB: None
RWRB: None
RWRA: None
RFIN: None
"""
translators = files.openYaml(None, None, contents24)
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "operations\\Translators\\scenario1\\"
staticFilename = "static.c3d"
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
acqStatic2 = btkTools.applyTranslators(acqStatic,
translators["Translators"])
btkTools.smartWriter(acqStatic2, "scenario1Test.c3d")
np.testing.assert_equal(
acqStatic2.GetPoint("LeftASI").GetValues(),
acqStatic2.GetPoint("LASI").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("RightASI").GetValues(),
acqStatic2.GetPoint("RASI").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("LeftPSI").GetValues(),
acqStatic2.GetPoint("LPSI").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("RightPSI").GetValues(),
acqStatic2.GetPoint("RPSI").GetValues())
def calibrate(DATA_PATH, calibrateFilenameLabelled, translators, required_mp,
optional_mp, leftFlatFoot, rightFlatFoot, headFlat,
markerDiameter, pointSuffix, **kwargs):
"""
Calibration of the CGM1
:param DATA_PATH [str]: path to your data
:param calibrateFilenameLabelled [str]: c3d file
:param translators [dict]: translators to apply
:param required_mp [dict]: required anthropometric data
:param optional_mp [dict]: optional anthropometric data (ex: LThighOffset,...)
:param leftFlatFoot [bool]: enable of the flat foot option for the left foot
:param rightFlatFoot [bool]: enable of the flat foot option for the right foot
:param headFlat [bool]: enable of the head flat option
:param markerDiameter [double]: marker diameter (mm)
:param pointSuffix [str]: suffix to add to model outputs
"""
# --------------------------ACQUISITION ------------------------------------
if "forceBtkAcq" in kwargs.keys():
acqStatic = kwargs["forceBtkAcq"]
else:
# ---btk acquisition---
acqStatic = btkTools.smartReader(
str(DATA_PATH + calibrateFilenameLabelled))
btkTools.checkMultipleSubject(acqStatic)
acqStatic = btkTools.applyTranslators(acqStatic, translators)
# ---check marker set used----
dcm = cgm.CGM.detectCalibrationMethods(acqStatic)
# ---definition---
model = cgm.CGM1()
model.configure(acq=acqStatic, detectedCalibrationMethods=dcm)
model.addAnthropoInputParameters(required_mp, optional=optional_mp)
# --store calibration parameters--
model.setStaticFilename(calibrateFilenameLabelled)
model.setCalibrationProperty("leftFlatFoot", leftFlatFoot)
model.setCalibrationProperty("rightFlatFoot", rightFlatFoot)
model.setCalibrationProperty("headFlat", headFlat)
model.setCalibrationProperty("markerDiameter", markerDiameter)
# --------------------------STATIC CALBRATION--------------------------
scp = modelFilters.StaticCalibrationProcedure(
model) # load calibration procedure
# ---initial calibration filter----
modelFilters.ModelCalibrationFilter(scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
markerDiameter=markerDiameter,
headFlat=headFlat,
viconCGM1compatible=True).compute()
# ---- Decorators -----
decorators.applyBasicDecorators(dcm,
model,
acqStatic,
optional_mp,
markerDiameter,
cgm1only=True)
pigStaticMarkers = cgm.CGM.get_markerLabelForPiGStatic(dcm)
# ----Final Calibration filter if model previously decorated -----
if model.decoratedModel:
# initial static filter
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter,
viconCGM1compatible=True).compute()
# ----------------------CGM MODELLING----------------------------------
# ----motion filter----
# notice : viconCGM1compatible option duplicate error on Construction of the foot coordinate system
modMotion = modelFilters.ModelMotionFilter(
scp,
acqStatic,
model,
enums.motionMethod.Determinist,
markerDiameter=markerDiameter,
viconCGM1compatible=False,
pigStatic=True,
useLeftKJCmarker=pigStaticMarkers[0],
useLeftAJCmarker=pigStaticMarkers[1],
useRightKJCmarker=pigStaticMarkers[2],
useRightAJCmarker=pigStaticMarkers[3])
modMotion.compute()
if "displayCoordinateSystem" in kwargs.keys(
) and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(
csp, model, acqStatic)
csdf.setStatic(False)
csdf.display()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model, acqStatic).compute(
description="vectoriel", pointLabelSuffix=pointSuffix)
# detection of traveling axis + absolute angle
if model.m_bodypart != enums.BodyPart.UpperLimb:
longitudinalAxis, forwardProgression, globalFrame = btkTools.findProgressionAxisFromPelvicMarkers(
acqStatic, ["LASI", "LPSI", "RASI", "RPSI"])
else:
longitudinalAxis, forwardProgression, globalFrame = btkTools.findProgressionAxisFromLongAxis(
acqStatic, "C7", "CLAV")
if model.m_bodypart != enums.BodyPart.UpperLimb:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqStatic,
segmentLabels=["Left Foot", "Right Foot", "Pelvis"],
angleLabels=["LFootProgress", "RFootProgress", "Pelvis"],
eulerSequences=["TOR", "TOR", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.LowerLimbTrunk:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqStatic,
segmentLabels=["Thorax"],
angleLabels=["Thorax"],
eulerSequences=["YXZ"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.UpperLimb or model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqStatic,
segmentLabels=["Thorax", "Head"],
angleLabels=["Thorax", "Head"],
eulerSequences=["YXZ", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
# BSP model
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
if model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.CentreOfMassFilter(
model, acqStatic).compute(pointLabelSuffix=pointSuffix)
return model, acqStatic
def scenario4Test(cls):
"""
you want to swp to markers
( e.g : LTHI swap with LTHAD)
return:
in the final c3d, both markers are swapped. there are no _origin markers
"""
contents24 = """
Translators:
LASI: None
RASI: None
LPSI: None
RPSI: None
RTHI: None
RKNE: None
RTIAP: None
RTIAD: None
RTIB: None
RANK: None
RTIAP: None
RTIAD: None
RHEE: None
RSMH: None
RTOE: None
RFMH: None
RVMH: None
LTHI: LTHAD
LKNE: None
LTHAP: None
LTHAD: LTHI
LTIB: None
LANK: None
LTIAP: None
LTIAD: None
LHEE: None
LSMH: None
LTOE: None
LFMH: None
LVMH: None
RKNM: None
LKNM: None
RMED: None
LMED: None
C7: None
T10: None
CLAV: None
STRN: None
LFHD: None
LBHD: None
RFHD: None
RBHD: None
LSHO: None
LELB: None
LWRB: None
LWRA: None
LFIN: None
RSHO: None
RELB: None
RWRB: None
RWRA: None
RFIN: None
"""
translators = files.openYaml(None, None, contents24)
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "operations\\Translators\\scenario4\\"
staticFilename = "staticAlana.c3d"
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
acqStatic2 = btkTools.applyTranslators(acqStatic,
translators["Translators"])
btkTools.smartWriter(acqStatic2, "scenario4Test.c3d")
np.testing.assert_equal(
acqStatic2.GetPoint("LTHI").GetValues(),
acqStatic.GetPoint("LTHAD").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("LTHAD").GetValues(),
acqStatic.GetPoint("LTHI").GetValues())
from pyCGM2.Model.RCM import rcm
from pyCGM2 import enums
from pyCGM2.Tools import btkTools
from pyCGM2.Utils import files
if __name__ == "__main__":
DATA_PATH = pyCGM2.TEST_DATA_PATH + "RCM\\Qualisys\\subject297\\"
staticFilename = "subject_297_static_0001.c3d"
translators = files.openTranslators(DATA_PATH,"RCM.translators")
acqStatic0 = btkTools.smartReader(str(DATA_PATH + staticFilename))
acqStatic = btkTools.applyTranslators(acqStatic0,translators)
dynamicFilename = "subject_297_run_0001.c3d"
acqDynamic0 = btkTools.smartReader(str(DATA_PATH + dynamicFilename))
acqDynamic = btkTools.applyTranslators(acqDynamic0,translators)
# ---- Model configuration ----
bioMechModel = rcm.RCM()
bioMechModel.configure()
mp={
'LeftKneeWidth' : anthropometricMeasurement.measureNorm(acqStatic,"LKNE","LKNM",markerDiameter =14),
'RightKneeWidth' : anthropometricMeasurement.measureNorm(acqStatic,"RKNE","RKNM",markerDiameter =14),
'LeftAnkleWidth' : anthropometricMeasurement.measureNorm(acqStatic,"LANK","LMED",markerDiameter =14),
'RightAnkleWidth' : anthropometricMeasurement.measureNorm(acqStatic,"RANK","RMED",markerDiameter =14),
}
def translators24_initiateWith_25markerset(cls):
contents24 = """
Translators:
LASI: None
RASI: None
LPSI: None
RPSI: None
RTHI: None
RKNE: None
RTIAP: None
RTIAD: None
RTIB: None
RANK: None
RTIAP: None
RTIAD: None
RHEE: None
RSMH: None
RTOE: None
RFMH: None
RVMH: None
LTHI: None
LKNE: None
LTHAP: None
LTHAD: None
LTIB: None
LANK: None
LTIAP: None
LTIAD: None
LHEE: None
LSMH: None
LTOE: None
LFMH: None
LVMH: None
RKNM: None
LKNM: None
RMED: None
LMED: None
C7: T2
T10: None
CLAV: None
STRN: CLAV
LFHD: GLAB
LBHD: LMAS
RFHD: GLAB
RBHD: RMAS
LSHO: None
LELB: None
LWRB: None
LWRA: None
LFIN: None
RSHO: None
RELB: None
RWRB: None
RWRA: None
RFIN: None
"""
translators = files.openYaml(None, None, contents24)
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "operations\\Translators\\cgm2.5\\"
staticFilename = "static.c3d"
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
acqStatic2 = btkTools.applyTranslators(acqStatic,
translators["Translators"])
btkTools.smartWriter(acqStatic2,
"translators24_initiateWith_25markerset.c3d")
np.testing.assert_equal(
acqStatic2.GetPoint("C7").GetValues(),
acqStatic.GetPoint("T2").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("LFHD").GetValues(),
acqStatic.GetPoint("GLAB").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("RFHD").GetValues(),
acqStatic.GetPoint("GLAB").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("LBHD").GetValues(),
acqStatic.GetPoint("LMAS").GetValues())
np.testing.assert_equal(
acqStatic2.GetPoint("RBHD").GetValues(),
acqStatic.GetPoint("RMAS").GetValues())
def fitting(model, DATA_PATH, reconstructFilenameLabelled, translators,
markerDiameter, pointSuffix, mfpa, momentProjection):
# --------------------------ACQUISITION ------------------------------------
# --- btk acquisition ----
acqGait = btkTools.smartReader(str(DATA_PATH +
reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqGait)
acqGait = btkTools.applyTranslators(acqGait, translators)
validFrames, vff, vlf = btkTools.findValidFrames(
acqGait, cgm.CGM1LowerLimbs.TRACKING_MARKERS)
scp = modelFilters.StaticCalibrationProcedure(model)
# ---Motion filter----
modMotion = modelFilters.ModelMotionFilter(scp,
acqGait,
model,
enums.motionMethod.Determinist,
markerDiameter=markerDiameter)
modMotion.compute()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,
acqGait).compute(description="vectoriel",
pointLabelSuffix=pointSuffix)
# detection of traveling axis
longitudinalAxis, forwardProgression, globalFrame = btkTools.findProgressionAxisFromPelvicMarkers(
acqGait, ["LASI", "LPSI", "RASI", "RPSI"])
# absolute angles
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqGait,
segmentLabels=["Left Foot", "Right Foot", "Pelvis"],
angleLabels=["LFootProgress", "RFootProgress", "Pelvis"],
eulerSequences=["TOR", "TOR", "ROT"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
#---- Body segment parameters----
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
# --- force plate handling----
# find foot in contact
mappedForcePlate = forceplates.matchingFootSideOnForceplate(acqGait)
forceplates.addForcePlateGeneralEvents(acqGait, mappedForcePlate)
logging.info("Automatic Force plate assignment : %s" % mappedForcePlate)
if mfpa is not None:
if len(mfpa) != len(mappedForcePlate):
raise Exception(
"[pyCGM2] manual force plate assignment badly sets. Wrong force plate number. %s force plate require"
% (str(len(mappedForcePlate))))
else:
mappedForcePlate = mfpa
forceplates.addForcePlateGeneralEvents(acqGait, mappedForcePlate)
logging.warning("Manual Force plate assignment : %s" %
mappedForcePlate)
# assembly foot and force plate
modelFilters.ForcePlateAssemblyFilter(
model,
acqGait,
mappedForcePlate,
leftSegmentLabel="Left Foot",
rightSegmentLabel="Right Foot").compute()
#---- Joint kinetics----
idp = modelFilters.CGMLowerlimbInverseDynamicProcedure()
modelFilters.InverseDynamicFilter(
model, acqGait, procedure=idp,
projection=momentProjection).compute(pointLabelSuffix=pointSuffix)
#---- Joint energetics----
modelFilters.JointPowerFilter(
model, acqGait).compute(pointLabelSuffix=pointSuffix)
#---- zero unvalid frames ---
btkTools.applyValidFramesOnOutput(acqGait, validFrames)
return acqGait
def full_IK(cls):
MAIN_PATH = pyCGM2.TEST_DATA_PATH + "CGM2\\cgm2.3\\fullBody\\"
staticFilename = "PN01OP01S01STAT.c3d"
gaitFilename = "PN01OP01S01SS01.c3d"
markerDiameter = 14
mp = {
'Bodymass': 83.0,
'LeftLegLength': 874.0,
'RightLegLength': 876.0,
'LeftKneeWidth': 106.0,
'RightKneeWidth': 103.0,
'LeftAnkleWidth': 74.0,
'RightAnkleWidth': 72.0,
'LeftSoleDelta': 0,
'RightSoleDelta': 0,
}
# --- Calibration ---
acqStatic = btkTools.smartReader(str(MAIN_PATH + staticFilename))
translators = files.getTranslators(MAIN_PATH, "CGM2_3.translators")
acqStatic = btkTools.applyTranslators(acqStatic, translators)
model = cgm2.CGM2_3LowerLimbs()
model.configure()
model.addAnthropoInputParameters(mp)
# ---- Calibration ----
scp = modelFilters.StaticCalibrationProcedure(model)
modelFilters.ModelCalibrationFilter(scp, acqStatic, model).compute()
# cgm decorator
modelDecorator.HipJointCenterDecorator(model).hara()
modelDecorator.KneeCalibrationDecorator(model).midCondyles(
acqStatic, markerDiameter=markerDiameter, side="both")
modelDecorator.AnkleCalibrationDecorator(model).midMaleolus(
acqStatic, markerDiameter=markerDiameter, side="both")
# final
modelFilters.ModelCalibrationFilter(
scp, acqStatic, model, markerDiameter=markerDiameter).compute()
# ------ Fitting -------
acqGait = btkTools.smartReader(str(MAIN_PATH + gaitFilename))
acqGait = btkTools.applyTranslators(acqGait, translators)
# Motion FILTER
modMotion = modelFilters.ModelMotionFilter(
scp, acqGait, model, enums.motionMethod.Sodervisk)
modMotion.compute()
# ------- OPENSIM IK --------------------------------------
# --- osim builder ---
cgmCalibrationprocedure = opensimFilters.CgmOpensimCalibrationProcedures(
model)
markersetFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_3\\cgm2_3-markerset.xml"
osimfile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\osim\\lowerLimb_ballsJoints.osim"
oscf = opensimFilters.opensimCalibrationFilter(
osimfile, model, cgmCalibrationprocedure, MAIN_PATH)
oscf.addMarkerSet(markersetFile)
scalingOsim = oscf.build(exportOsim=False)
# --- fitting ---
#procedure
cgmFittingProcedure = opensimFilters.CgmOpensimFittingProcedure(model)
iksetupFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_3\\cgm2_3-ikSetUp_template.xml"
osrf = opensimFilters.opensimFittingFilter(iksetupFile, scalingOsim,
cgmFittingProcedure,
MAIN_PATH)
acqIK = osrf.run(acqGait,
str(MAIN_PATH + gaitFilename),
exportSetUp=False)
# -------- NEW MOTION FILTER ON IK MARKERS ------------------
modMotion_ik = modelFilters.ModelMotionFilter(
scp,
acqIK,
model,
enums.motionMethod.Sodervisk,
useForMotionTest=True)
modMotion_ik.compute()
finalJcs = modelFilters.ModelJCSFilter(model, acqIK)
finalJcs.setFilterBool(False)
finalJcs.compute(description="ik", pointLabelSuffix="2_ik") #
btkTools.smartWriter(acqIK, "cgm23_fullIK_Motion.c3d")
def calibrate(DATA_PATH, calibrateFilenameLabelled, translators, required_mp,
optional_mp, leftFlatFoot, rightFlatFoot, markerDiameter,
hjcMethod, pointSuffix):
# --------------------------ACQUISITION ------------------------------------
# ---btk acquisition---
acqStatic = btkTools.smartReader(str(DATA_PATH +
calibrateFilenameLabelled))
btkTools.checkMultipleSubject(acqStatic)
acqStatic = btkTools.applyTranslators(acqStatic, translators)
# ---definition---
model = cgm2.CGM2_1LowerLimbs()
model.configure()
model.addAnthropoInputParameters(required_mp, optional=optional_mp)
# --store calibration parameters--
model.setStaticFilename(calibrateFilenameLabelled)
model.setCalibrationProperty("leftFlatFoot", leftFlatFoot)
model.setCalibrationProperty("rightFlatFoot", rightFlatFoot)
model.setCalibrationProperty("markerDiameter", markerDiameter)
# ---check marker set used----
smc = cgm.CGM.checkCGM1_StaticMarkerConfig(acqStatic)
# --------------------------STATIC CALBRATION--------------------------
scp = modelFilters.StaticCalibrationProcedure(
model) # load calibration procedure
# ---initial calibration filter----
# use if all optional mp are zero
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
markerDiameter=markerDiameter,
).compute()
# ---- Decorators -----
decorators.applyDecorators_CGM(smc, model, acqStatic, optional_mp,
markerDiameter)
decorators.applyHJCDecorators(model, hjcMethod)
# ----Final Calibration filter if model previously decorated -----
if model.decoratedModel:
# initial static filter
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
markerDiameter=markerDiameter,
).compute()
# ----------------------CGM MODELLING----------------------------------
# ----motion filter----
# notice : viconCGM1compatible option duplicate error on Construction of the foot coordinate system
modMotion = modelFilters.ModelMotionFilter(scp,
acqStatic,
model,
enums.motionMethod.Determinist,
markerDiameter=markerDiameter)
modMotion.compute()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model, acqStatic).compute(
description="vectoriel", pointLabelSuffix=pointSuffix)
# detection of traveling axis
longitudinalAxis, forwardProgression, globalFrame = btkTools.findProgressionAxisFromPelvicMarkers(
acqStatic, ["LASI", "RASI", "RPSI", "LPSI"])
# absolute angles
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqStatic,
segmentLabels=["Left Foot", "Right Foot", "Pelvis"],
angleLabels=["LFootProgress", "RFootProgress", "Pelvis"],
eulerSequences=["TOR", "TOR", "ROT"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
return model, acqStatic
def fitting(model, DATA_PATH, reconstructFilenameLabelled, translators,
markerDiameter, pointSuffix, mfpa, momentProjection, **kwargs):
"""
Fitting of the CGM1.1
:param model [str]: pyCGM2 model previously calibrated
:param DATA_PATH [str]: path to your data
:param reconstructFilenameLabelled [string list]: c3d files
:param translators [dict]: translators to apply
:param mfpa [str]: manual force plate assignement
:param markerDiameter [double]: marker diameter (mm)
:param pointSuffix [str]: suffix to add to model outputs
:param momentProjection [str]: Coordinate system in which joint moment is expressed
"""
# --------------------------ACQUISITION ------------------------------------
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqGait = kwargs["forceBtkAcq"]
else:
acqGait = btkTools.smartReader(
(DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqGait)
if btkTools.isPointExist(acqGait, "SACR"):
translators["LPSI"] = "SACR"
translators["RPSI"] = "SACR"
logging.info("[pyCGM2] Sacrum marker detected")
acqGait = btkTools.applyTranslators(acqGait, translators)
trackingMarkers = model.getTrackingMarkers(acqGait)
validFrames, vff, vlf = btkTools.findValidFrames(acqGait, trackingMarkers)
# filtering
# -----------------------
if "fc_lowPass_marker" in kwargs.keys(
) and kwargs["fc_lowPass_marker"] != 0:
fc = kwargs["fc_lowPass_marker"]
order = 4
if "order_lowPass_marker" in kwargs.keys():
order = kwargs["order_lowPass_marker"]
signal_processing.markerFiltering(acqGait,
trackingMarkers,
order=order,
fc=fc)
if "fc_lowPass_forcePlate" in kwargs.keys(
) and kwargs["fc_lowPass_forcePlate"] != 0:
fc = kwargs["fc_lowPass_forcePlate"]
order = 4
if "order_lowPass_forcePlate" in kwargs.keys():
order = kwargs["order_lowPass_forcePlate"]
signal_processing.forcePlateFiltering(acqGait, order=order, fc=fc)
scp = modelFilters.StaticCalibrationProcedure(model) # procedure
# ---Motion filter----
modMotion = modelFilters.ModelMotionFilter(scp,
acqGait,
model,
enums.motionMethod.Determinist,
markerDiameter=markerDiameter)
modMotion.compute()
if "displayCoordinateSystem" in kwargs.keys(
) and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(csp, model, acqGait)
csdf.setStatic(False)
csdf.display()
if "NaimKneeCorrection" in kwargs.keys() and kwargs["NaimKneeCorrection"]:
# Apply Naim 2019 method
if type(kwargs["NaimKneeCorrection"]) is float:
nmacp = modelFilters.Naim2019ThighMisaligmentCorrectionProcedure(
model, "Both", threshold=(kwargs["NaimKneeCorrection"]))
else:
nmacp = modelFilters.Naim2019ThighMisaligmentCorrectionProcedure(
model, "Both")
mmcf = modelFilters.ModelMotionCorrectionFilter(nmacp)
mmcf.correct()
# btkTools.smartAppendPoint(acqGait,"LNaim",mmcf.m_procedure.m_virtual["Left"])
# btkTools.smartAppendPoint(acqGait,"RNaim",mmcf.m_procedure.m_virtual["Right"])
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,
acqGait).compute(description="vectoriel",
pointLabelSuffix=pointSuffix)
# detection of traveling axis + absolute angle
if model.m_bodypart != enums.BodyPart.UpperLimb:
pfp = progressionFrame.PelvisProgressionFrameProcedure()
else:
pfp = progressionFrame.ThoraxProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(acqGait, pfp)
pff.compute()
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
if model.m_bodypart != enums.BodyPart.UpperLimb:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqGait,
segmentLabels=["Left Foot", "Right Foot", "Pelvis"],
angleLabels=["LFootProgress", "RFootProgress", "Pelvis"],
eulerSequences=["TOR", "TOR", "ROT"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.LowerLimbTrunk:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqGait,
segmentLabels=["Thorax"],
angleLabels=["Thorax"],
eulerSequences=["YXZ"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.UpperLimb or model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqGait,
segmentLabels=["Thorax", "Head"],
angleLabels=["Thorax", "Head"],
eulerSequences=["YXZ", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
#---- Body segment parameters----
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
if model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.CentreOfMassFilter(
model, acqGait).compute(pointLabelSuffix=pointSuffix)
# Inverse dynamics
if btkTools.checkForcePlateExist(acqGait):
if model.m_bodypart != enums.BodyPart.UpperLimb:
# --- force plate handling----
# find foot in contact
mappedForcePlate = forceplates.matchingFootSideOnForceplate(
acqGait, mfpa=mfpa)
forceplates.addForcePlateGeneralEvents(acqGait, mappedForcePlate)
logging.warning("Manual Force plate assignment : %s" %
mappedForcePlate)
# assembly foot and force plate
modelFilters.ForcePlateAssemblyFilter(
model,
acqGait,
mappedForcePlate,
leftSegmentLabel="Left Foot",
rightSegmentLabel="Right Foot").compute(
pointLabelSuffix=pointSuffix)
#---- Joint kinetics----
idp = modelFilters.CGMLowerlimbInverseDynamicProcedure()
modelFilters.InverseDynamicFilter(
model,
acqGait,
procedure=idp,
projection=momentProjection,
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
#---- Joint energetics----
modelFilters.JointPowerFilter(
model, acqGait).compute(pointLabelSuffix=pointSuffix)
#---- zero unvalid frames ---
btkTools.applyValidFramesOnOutput(acqGait, validFrames)
return acqGait
def fitting(model,DATA_PATH, reconstructFilenameLabelled,
translators,settings,
ik_flag,markerDiameter,
pointSuffix,
mfpa,
momentProjection):
# --- btk acquisition ----
acqGait = btkTools.smartReader(str(DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqGait)
acqGait = btkTools.applyTranslators(acqGait,translators)
validFrames,vff,vlf = btkTools.findValidFrames(acqGait,cgm2.CGM2_4LowerLimbs.TRACKING_MARKERS)
# --- initial motion Filter ---
scp=modelFilters.StaticCalibrationProcedure(model)
modMotion=modelFilters.ModelMotionFilter(scp,acqGait,model,enums.motionMethod.Sodervisk)
modMotion.compute()
if ik_flag:
# ---OPENSIM IK---
# --- opensim calibration Filter ---
osimfile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\osim\\lowerLimb_ballsJoints.osim" # osimfile
markersetFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_4\\cgm2_4-markerset.xml" # markerset
cgmCalibrationprocedure = opensimFilters.CgmOpensimCalibrationProcedures(model) # procedure
oscf = opensimFilters.opensimCalibrationFilter(osimfile,
model,
cgmCalibrationprocedure,
str(DATA_PATH))
oscf.addMarkerSet(markersetFile)
scalingOsim = oscf.build()
# --- opensim Fitting Filter ---
iksetupFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_4\\cgm2_4-ikSetUp_template.xml" # ik tl file
cgmFittingProcedure = opensimFilters.CgmOpensimFittingProcedure(model) # procedure
cgmFittingProcedure.updateMarkerWeight("LASI",settings["Fitting"]["Weight"]["LASI"])
cgmFittingProcedure.updateMarkerWeight("RASI",settings["Fitting"]["Weight"]["RASI"])
cgmFittingProcedure.updateMarkerWeight("LPSI",settings["Fitting"]["Weight"]["LPSI"])
cgmFittingProcedure.updateMarkerWeight("RPSI",settings["Fitting"]["Weight"]["RPSI"])
cgmFittingProcedure.updateMarkerWeight("RTHI",settings["Fitting"]["Weight"]["RTHI"])
cgmFittingProcedure.updateMarkerWeight("RKNE",settings["Fitting"]["Weight"]["RKNE"])
cgmFittingProcedure.updateMarkerWeight("RTIB",settings["Fitting"]["Weight"]["RTIB"])
cgmFittingProcedure.updateMarkerWeight("RANK",settings["Fitting"]["Weight"]["RANK"])
cgmFittingProcedure.updateMarkerWeight("RHEE",settings["Fitting"]["Weight"]["RHEE"])
cgmFittingProcedure.updateMarkerWeight("RTOE",settings["Fitting"]["Weight"]["RTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHI",settings["Fitting"]["Weight"]["LTHI"])
cgmFittingProcedure.updateMarkerWeight("LKNE",settings["Fitting"]["Weight"]["LKNE"])
cgmFittingProcedure.updateMarkerWeight("LTIB",settings["Fitting"]["Weight"]["LTIB"])
cgmFittingProcedure.updateMarkerWeight("LANK",settings["Fitting"]["Weight"]["LANK"])
cgmFittingProcedure.updateMarkerWeight("LHEE",settings["Fitting"]["Weight"]["LHEE"])
cgmFittingProcedure.updateMarkerWeight("LTOE",settings["Fitting"]["Weight"]["LTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHAP",settings["Fitting"]["Weight"]["LTHAP"])
cgmFittingProcedure.updateMarkerWeight("LTHAD",settings["Fitting"]["Weight"]["LTHAD"])
cgmFittingProcedure.updateMarkerWeight("LTIAP",settings["Fitting"]["Weight"]["LTIAP"])
cgmFittingProcedure.updateMarkerWeight("LTIAD",settings["Fitting"]["Weight"]["LTIAD"])
cgmFittingProcedure.updateMarkerWeight("RTHAP",settings["Fitting"]["Weight"]["RTHAP"])
cgmFittingProcedure.updateMarkerWeight("RTHAD",settings["Fitting"]["Weight"]["RTHAD"])
cgmFittingProcedure.updateMarkerWeight("RTIAP",settings["Fitting"]["Weight"]["RTIAP"])
cgmFittingProcedure.updateMarkerWeight("RTIAD",settings["Fitting"]["Weight"]["RTIAD"])
cgmFittingProcedure.updateMarkerWeight("LSMH",settings["Fitting"]["Weight"]["LSMH"])
cgmFittingProcedure.updateMarkerWeight("LFMH",settings["Fitting"]["Weight"]["LFMH"])
cgmFittingProcedure.updateMarkerWeight("LVMH",settings["Fitting"]["Weight"]["LVMH"])
cgmFittingProcedure.updateMarkerWeight("RSMH",settings["Fitting"]["Weight"]["RSMH"])
cgmFittingProcedure.updateMarkerWeight("RFMH",settings["Fitting"]["Weight"]["RFMH"])
cgmFittingProcedure.updateMarkerWeight("RVMH",settings["Fitting"]["Weight"]["RVMH"])
# cgmFittingProcedure.updateMarkerWeight("LTHL",settings["Fitting"]["Weight"]["LTHL"])
# cgmFittingProcedure.updateMarkerWeight("LTHLD",settings["Fitting"]["Weight"]["LTHLD"])
# cgmFittingProcedure.updateMarkerWeight("LPAT",settings["Fitting"]["Weight"]["LPAT"])
# cgmFittingProcedure.updateMarkerWeight("LTIBL",settings["Fitting"]["Weight"]["LTIBL"])
# cgmFittingProcedure.updateMarkerWeight("RTHL",settings["Fitting"]["Weight"]["RTHL"])
# cgmFittingProcedure.updateMarkerWeight("RTHLD",settings["Fitting"]["Weight"]["RTHLD"])
# cgmFittingProcedure.updateMarkerWeight("RPAT",settings["Fitting"]["Weight"]["RPAT"])
# cgmFittingProcedure.updateMarkerWeight("RTIBL",settings["Fitting"]["Weight"]["RTIBL"])
osrf = opensimFilters.opensimFittingFilter(iksetupFile,
scalingOsim,
cgmFittingProcedure,
str(DATA_PATH) )
logging.info("-------INVERSE KINEMATICS IN PROGRESS----------")
acqIK = osrf.run(acqGait,str(DATA_PATH + reconstructFilenameLabelled ))
logging.info("-------INVERSE KINEMATICS DONE-----------------")
# eventual gait acquisition to consider for joint kinematics
finalAcqGait = acqIK if ik_flag else acqGait
# --- final pyCGM2 model motion Filter ---
# use fitted markers
modMotionFitted=modelFilters.ModelMotionFilter(scp,finalAcqGait,model,enums.motionMethod.Sodervisk ,
markerDiameter=markerDiameter)
modMotionFitted.compute()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,finalAcqGait).compute(description="vectoriel", pointLabelSuffix=pointSuffix)
# detection of traveling axis
longitudinalAxis,forwardProgression,globalFrame = btkTools.findProgressionAxisFromPelvicMarkers(finalAcqGait,["LASI","LPSI","RASI","RPSI"])
# absolute angles
modelFilters.ModelAbsoluteAnglesFilter(model,finalAcqGait,
segmentLabels=["Left Foot","Right Foot","Pelvis"],
angleLabels=["LFootProgress", "RFootProgress","Pelvis"],
eulerSequences=["TOR","TOR", "ROT"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
#---- Body segment parameters----
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
# --- force plate handling----
# find foot in contact
mappedForcePlate = forceplates.matchingFootSideOnForceplate(finalAcqGait)
forceplates.addForcePlateGeneralEvents(finalAcqGait,mappedForcePlate)
logging.info("Force plate assignment : %s" %mappedForcePlate)
if mfpa is not None:
if len(mfpa) != len(mappedForcePlate):
raise Exception("[pyCGM2] manual force plate assignment badly sets. Wrong force plate number. %s force plate require" %(str(len(mappedForcePlate))))
else:
mappedForcePlate = mfpa
forceplates.addForcePlateGeneralEvents(finalAcqGait,mappedForcePlate)
logging.warning("Manual Force plate assignment : %s" %mappedForcePlate)
# assembly foot and force plate
modelFilters.ForcePlateAssemblyFilter(model,finalAcqGait,mappedForcePlate,
leftSegmentLabel="Left Foot",
rightSegmentLabel="Right Foot").compute()
#---- Joint kinetics----
idp = modelFilters.CGMLowerlimbInverseDynamicProcedure()
modelFilters.InverseDynamicFilter(model,
finalAcqGait,
procedure = idp,
projection = momentProjection
).compute(pointLabelSuffix=pointSuffix)
#---- Joint energetics----
modelFilters.JointPowerFilter(model,finalAcqGait).compute(pointLabelSuffix=pointSuffix)
#---- zero unvalid frames ---
btkTools.applyValidFramesOnOutput(finalAcqGait,validFrames)
return finalAcqGait
def calibration2Dof(model, DATA_PATH, reconstructFilenameLabelled, translators,
side, beginFrame, endFrame, jointRange, **kwargs):
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqFunc = kwargs["forceBtkAcq"]
else:
acqFunc = btkTools.smartReader(
(DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqFunc)
acqFunc = btkTools.applyTranslators(acqFunc, translators)
# filtering
# -----------------------
if "fc_lowPass_marker" in kwargs.keys(
) and kwargs["fc_lowPass_marker"] != 0:
trackingMarkers = model.getTrackingMarkers(acqFunc)
fc = kwargs["fc_lowPass_marker"]
order = 4
if "order_lowPass_marker" in kwargs.keys():
order = kwargs["order_lowPass_marker"]
signal_processing.markerFiltering(acqFunc,
trackingMarkers,
order=order,
fc=fc)
#---get frame range of interest---
ff = acqFunc.GetFirstFrame()
lf = acqFunc.GetLastFrame()
# motion
if side is None:
side = detectSide(acqFunc, "LANK", "RANK")
LOGGER.logger.info("Detected motion side : %s" % (side))
start, end = btkTools.getStartEndEvents(acqFunc, side)
if start is not None:
LOGGER.logger.info("Start event detected")
initFrame = start
else:
initFrame = beginFrame if beginFrame is not None else ff
if end is not None:
LOGGER.logger.info("End event detected")
endFrame = end
else:
endFrame = endFrame if endFrame is not None else lf
iff = initFrame - ff
ilf = endFrame - ff
if model.version in ["CGM1.0", "CGM1.1", "CGM2.1", "CGM2.2"]:
validFrames, vff, vlf = btkTools.findValidFrames(
acqFunc, cgm.CGM1.LOWERLIMB_TRACKING_MARKERS)
# --------------------------RESET OF THE STATIC File---------
# load btkAcq from static file
staticFilename = model.m_staticFilename
acqStatic = btkTools.smartReader((DATA_PATH + staticFilename))
btkTools.checkMultipleSubject(acqStatic)
acqStatic = btkTools.applyTranslators(acqStatic, translators)
# initial calibration ( i.e calibration from Calibration operation)
leftFlatFoot = model.m_properties["CalibrationParameters"]["leftFlatFoot"]
rightFlatFoot = model.m_properties["CalibrationParameters"][
"rightFlatFoot"]
headFlat = model.m_properties["CalibrationParameters"]["headFlat"]
markerDiameter = model.m_properties["CalibrationParameters"][
"markerDiameter"]
if side == "Left":
# remove other functional calibration
model.mp_computed["LeftKneeFuncCalibrationOffset"] = 0
if side == "Right":
# remove other functional calibration
model.mp_computed["RightKneeFuncCalibrationOffset"] = 0
# no rotation on both thigh - re init anatonical frame
scp = modelFilters.StaticCalibrationProcedure(model)
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter).compute()
if model.version in ["CGM1.0", "CGM1.1", "CGM2.1", "CGM2.2"]:
modMotion = modelFilters.ModelMotionFilter(
scp, acqFunc, model, enums.motionMethod.Determinist)
modMotion.compute()
elif model.version in ["CGM2.3", "CGM2.4", "CGM2.5"]:
if side == "Left":
thigh_markers = model.getSegment("Left Thigh").m_tracking_markers
shank_markers = model.getSegment("Left Shank").m_tracking_markers
elif side == "Right":
thigh_markers = model.getSegment("Right Thigh").m_tracking_markers
shank_markers = model.getSegment("Right Shank").m_tracking_markers
validFrames, vff, vlf = btkTools.findValidFrames(
acqFunc, thigh_markers + shank_markers)
proximalSegmentLabel = (side + " Thigh")
distalSegmentLabel = (side + " Shank")
# Motion
modMotion = modelFilters.ModelMotionFilter(
scp, acqFunc, model, enums.motionMethod.Sodervisk)
modMotion.segmentalCompute([proximalSegmentLabel, distalSegmentLabel])
# calibration decorators
modelDecorator.KneeCalibrationDecorator(model).calibrate2dof(
side, indexFirstFrame=iff, indexLastFrame=ilf, jointRange=jointRange)
# --------------------------FINAL CALIBRATION OF THE STATIC File---------
# ---- Calibration
modelFilters.ModelCalibrationFilter(
scp,
acqStatic,
model,
leftFlatFoot=leftFlatFoot,
rightFlatFoot=rightFlatFoot,
headFlat=headFlat,
markerDiameter=markerDiameter).compute()
return model, acqFunc, side
def calibrate(DATA_PATH,calibrateFilenameLabelled,translators,settings,
required_mp,optional_mp,
ik_flag,leftFlatFoot,rightFlatFoot,markerDiameter,hjcMethod,
pointSuffix):
# ---btk acquisition---
acqStatic = btkTools.smartReader(str(DATA_PATH+calibrateFilenameLabelled))
btkTools.checkMultipleSubject(acqStatic)
acqStatic = btkTools.applyTranslators(acqStatic,translators)
validFrames,vff,vlf = btkTools.findValidFrames(acqStatic,cgm2.CGM2_4LowerLimbs.TRACKING_MARKERS)
# --------------------------MODEL--------------------------------------
# ---definition---
model=cgm2.CGM2_4LowerLimbs()
model.configure()
model.addAnthropoInputParameters(required_mp,optional=optional_mp)
# --store calibration parameters--
model.setStaticFilename(calibrateFilenameLabelled)
model.setCalibrationProperty("leftFlatFoot",leftFlatFoot)
model.setCalibrationProperty("rightFlatFoot",rightFlatFoot)
model.setCalibrationProperty("markerDiameter",markerDiameter)
# ---check marker set used----
smc = cgm.CGM.checkCGM1_StaticMarkerConfig(acqStatic)
# --------------------------STATIC CALBRATION--------------------------
scp=modelFilters.StaticCalibrationProcedure(model) # load calibration procedure
# ---initial calibration filter----
# use if all optional mp are zero
modelFilters.ModelCalibrationFilter(scp,acqStatic,model,
leftFlatFoot = leftFlatFoot, rightFlatFoot = rightFlatFoot,
markerDiameter=markerDiameter,
).compute()
# ---- Decorators -----
decorators.applyDecorators_CGM(smc, model,acqStatic,optional_mp,markerDiameter)
decorators.applyHJCDecorators(model,hjcMethod)
# ----Final Calibration filter if model previously decorated -----
if model.decoratedModel:
# initial static filter
modelFilters.ModelCalibrationFilter(scp,acqStatic,model,
leftFlatFoot = leftFlatFoot, rightFlatFoot = rightFlatFoot,
markerDiameter=markerDiameter).compute()
# ----------------------CGM MODELLING----------------------------------
# ----motion filter----
modMotion=modelFilters.ModelMotionFilter(scp,acqStatic,model,enums.motionMethod.Sodervisk,
markerDiameter=markerDiameter)
modMotion.compute()
if ik_flag:
# ---OPENSIM IK---
# --- opensim calibration Filter ---
osimfile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\osim\\lowerLimb_ballsJoints.osim" # osimfile
markersetFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_4\\cgm2_4-markerset.xml" # markerset
cgmCalibrationprocedure = opensimFilters.CgmOpensimCalibrationProcedures(model) # procedure
oscf = opensimFilters.opensimCalibrationFilter(osimfile,
model,
cgmCalibrationprocedure,
str(DATA_PATH))
oscf.addMarkerSet(markersetFile)
scalingOsim = oscf.build()
# --- opensim Fitting Filter ---
iksetupFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_4\\cgm2_4-ikSetUp_template.xml" # ik tool file
cgmFittingProcedure = opensimFilters.CgmOpensimFittingProcedure(model) # procedure
cgmFittingProcedure.updateMarkerWeight("LASI",settings["Fitting"]["Weight"]["LASI"])
cgmFittingProcedure.updateMarkerWeight("RASI",settings["Fitting"]["Weight"]["RASI"])
cgmFittingProcedure.updateMarkerWeight("LPSI",settings["Fitting"]["Weight"]["LPSI"])
cgmFittingProcedure.updateMarkerWeight("RPSI",settings["Fitting"]["Weight"]["RPSI"])
cgmFittingProcedure.updateMarkerWeight("RTHI",settings["Fitting"]["Weight"]["RTHI"])
cgmFittingProcedure.updateMarkerWeight("RKNE",settings["Fitting"]["Weight"]["RKNE"])
cgmFittingProcedure.updateMarkerWeight("RTIB",settings["Fitting"]["Weight"]["RTIB"])
cgmFittingProcedure.updateMarkerWeight("RANK",settings["Fitting"]["Weight"]["RANK"])
cgmFittingProcedure.updateMarkerWeight("RHEE",settings["Fitting"]["Weight"]["RHEE"])
cgmFittingProcedure.updateMarkerWeight("RTOE",settings["Fitting"]["Weight"]["RTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHI",settings["Fitting"]["Weight"]["LTHI"])
cgmFittingProcedure.updateMarkerWeight("LKNE",settings["Fitting"]["Weight"]["LKNE"])
cgmFittingProcedure.updateMarkerWeight("LTIB",settings["Fitting"]["Weight"]["LTIB"])
cgmFittingProcedure.updateMarkerWeight("LANK",settings["Fitting"]["Weight"]["LANK"])
cgmFittingProcedure.updateMarkerWeight("LHEE",settings["Fitting"]["Weight"]["LHEE"])
cgmFittingProcedure.updateMarkerWeight("LTOE",settings["Fitting"]["Weight"]["LTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHAP",settings["Fitting"]["Weight"]["LTHAP"])
cgmFittingProcedure.updateMarkerWeight("LTHAD",settings["Fitting"]["Weight"]["LTHAD"])
cgmFittingProcedure.updateMarkerWeight("LTIAP",settings["Fitting"]["Weight"]["LTIAP"])
cgmFittingProcedure.updateMarkerWeight("LTIAD",settings["Fitting"]["Weight"]["LTIAD"])
cgmFittingProcedure.updateMarkerWeight("RTHAP",settings["Fitting"]["Weight"]["RTHAP"])
cgmFittingProcedure.updateMarkerWeight("RTHAD",settings["Fitting"]["Weight"]["RTHAD"])
cgmFittingProcedure.updateMarkerWeight("RTIAP",settings["Fitting"]["Weight"]["RTIAP"])
cgmFittingProcedure.updateMarkerWeight("RTIAD",settings["Fitting"]["Weight"]["RTIAD"])
cgmFittingProcedure.updateMarkerWeight("LSMH",settings["Fitting"]["Weight"]["LSMH"])
cgmFittingProcedure.updateMarkerWeight("LFMH",settings["Fitting"]["Weight"]["LFMH"])
cgmFittingProcedure.updateMarkerWeight("LVMH",settings["Fitting"]["Weight"]["LVMH"])
cgmFittingProcedure.updateMarkerWeight("RSMH",settings["Fitting"]["Weight"]["RSMH"])
cgmFittingProcedure.updateMarkerWeight("RFMH",settings["Fitting"]["Weight"]["RFMH"])
cgmFittingProcedure.updateMarkerWeight("RVMH",settings["Fitting"]["Weight"]["RVMH"])
# cgmFittingProcedure.updateMarkerWeight("LTHL",settings["Fitting"]["Weight"]["LTHL"])
# cgmFittingProcedure.updateMarkerWeight("LTHLD",settings["Fitting"]["Weight"]["LTHLD"])
# cgmFittingProcedure.updateMarkerWeight("LPAT",settings["Fitting"]["Weight"]["LPAT"])
# cgmFittingProcedure.updateMarkerWeight("LTIBL",settings["Fitting"]["Weight"]["LTIBL"])
# cgmFittingProcedure.updateMarkerWeight("RTHL",settings["Fitting"]["Weight"]["RTHL"])
# cgmFittingProcedure.updateMarkerWeight("RTHLD",settings["Fitting"]["Weight"]["RTHLD"])
# cgmFittingProcedure.updateMarkerWeight("RPAT",settings["Fitting"]["Weight"]["RPAT"])
# cgmFittingProcedure.updateMarkerWeight("RTIBL",settings["Fitting"]["Weight"]["RTIBL"])
osrf = opensimFilters.opensimFittingFilter(iksetupFile,
scalingOsim,
cgmFittingProcedure,
str(DATA_PATH) )
acqStaticIK = osrf.run(acqStatic,str(DATA_PATH + calibrateFilenameLabelled ))
# eventual static acquisition to consider for joint kinematics
finalAcqStatic = acqStaticIK if ik_flag else acqStatic
# --- final pyCGM2 model motion Filter ---
# use fitted markers
modMotionFitted=modelFilters.ModelMotionFilter(scp,finalAcqStatic,model,enums.motionMethod.Sodervisk)
modMotionFitted.compute()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,finalAcqStatic).compute(description="vectoriel", pointLabelSuffix=pointSuffix)
# detection of traveling axis
longitudinalAxis,forwardProgression,globalFrame = btkTools.findProgressionAxisFromPelvicMarkers(finalAcqStatic,["LASI","RASI","RPSI","LPSI"])
# absolute angles
modelFilters.ModelAbsoluteAnglesFilter(model,finalAcqStatic,
segmentLabels=["Left Foot","Right Foot","Pelvis"],
angleLabels=["LFootProgress", "RFootProgress","Pelvis"],
eulerSequences=["TOR","TOR", "ROT"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
return model, finalAcqStatic
def fitting(model,DATA_PATH, reconstructFilenameLabelled,
translators,weights,
ik_flag,markerDiameter,
pointSuffix,
mfpa,
momentProjection,**kwargs):
"""
Fitting of the CGM2.3
:param model [str]: pyCGM2 model previously calibrated
:param DATA_PATH [str]: path to your data
:param reconstructFilenameLabelled [string list]: c3d files
:param translators [dict]: translators to apply
:param ik_flag [bool]: enable the inverse kinematic solver
:param mfpa [str]: manual force plate assignement
:param markerDiameter [double]: marker diameter (mm)
:param pointSuffix [str]: suffix to add to model outputs
:param momentProjection [str]: Coordinate system in which joint moment is expressed
"""
if "Fitting" in weights.keys():
weights = weights["Fitting"]["Weight"]
# --------------------------ACQ WITH TRANSLATORS --------------------------------------
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqGait = kwargs["forceBtkAcq"]
else:
acqGait = btkTools.smartReader((DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqGait)
if btkTools.isPointExist(acqGait,"SACR"):
translators["LPSI"] = "SACR"
translators["RPSI"] = "SACR"
logging.info("[pyCGM2] Sacrum marker detected")
acqGait = btkTools.applyTranslators(acqGait,translators)
trackingMarkers = model.getTrackingMarkers(acqGait)
validFrames,vff,vlf = btkTools.findValidFrames(acqGait,trackingMarkers)
# filtering
# -----------------------
if "fc_lowPass_marker" in kwargs.keys() and kwargs["fc_lowPass_marker"]!=0 :
fc = kwargs["fc_lowPass_marker"]
order = 4
if "order_lowPass_marker" in kwargs.keys():
order = kwargs["order_lowPass_marker"]
signal_processing.markerFiltering(acqGait,trackingMarkers,order=order, fc =fc)
if "fc_lowPass_forcePlate" in kwargs.keys() and kwargs["fc_lowPass_forcePlate"]!=0 :
fc = kwargs["fc_lowPass_forcePlate"]
order = 4
if "order_lowPass_forcePlate" in kwargs.keys():
order = kwargs["order_lowPass_forcePlate"]
signal_processing.forcePlateFiltering(acqGait,order=order, fc =fc)
# --- initial motion Filter ---
scp=modelFilters.StaticCalibrationProcedure(model)
# section to remove : - copy motion of ProximalShank from Shank with Sodervisk
modMotion=modelFilters.ModelMotionFilter(scp,acqGait,model,enums.motionMethod.Sodervisk)
modMotion.compute()
# /section to remove
if model.getBodyPart() == enums.BodyPart.UpperLimb:
ik_flag = False
logging.warning("[pyCGM2] Fitting only applied for the upper limb")
if ik_flag:
# ---OPENSIM IK---
# --- opensim calibration Filter ---
osimfile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\osim\\lowerLimb_ballsJoints.osim" # osimfile
markersetFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_3\\cgm2_3-markerset.xml" # markerset
cgmCalibrationprocedure = opensimFilters.CgmOpensimCalibrationProcedures(model) # procedure
oscf = opensimFilters.opensimCalibrationFilter(osimfile,
model,
cgmCalibrationprocedure,
(DATA_PATH))
oscf.addMarkerSet(markersetFile)
scalingOsim = oscf.build()
# --- opensim Fitting Filter ---
iksetupFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm2_3\\cgm2_3-ikSetUp_template.xml" # ik tl file
cgmFittingProcedure = opensimFilters.CgmOpensimFittingProcedure(model) # procedure
cgmFittingProcedure.updateMarkerWeight("LASI",weights["LASI"])
cgmFittingProcedure.updateMarkerWeight("RASI",weights["RASI"])
cgmFittingProcedure.updateMarkerWeight("LPSI",weights["LPSI"])
cgmFittingProcedure.updateMarkerWeight("RPSI",weights["RPSI"])
cgmFittingProcedure.updateMarkerWeight("RTHI",weights["RTHI"])
cgmFittingProcedure.updateMarkerWeight("RKNE",weights["RKNE"])
cgmFittingProcedure.updateMarkerWeight("RTIB",weights["RTIB"])
cgmFittingProcedure.updateMarkerWeight("RANK",weights["RANK"])
cgmFittingProcedure.updateMarkerWeight("RHEE",weights["RHEE"])
cgmFittingProcedure.updateMarkerWeight("RTOE",weights["RTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHI",weights["LTHI"])
cgmFittingProcedure.updateMarkerWeight("LKNE",weights["LKNE"])
cgmFittingProcedure.updateMarkerWeight("LTIB",weights["LTIB"])
cgmFittingProcedure.updateMarkerWeight("LANK",weights["LANK"])
cgmFittingProcedure.updateMarkerWeight("LHEE",weights["LHEE"])
cgmFittingProcedure.updateMarkerWeight("LTOE",weights["LTOE"])
cgmFittingProcedure.updateMarkerWeight("LTHAP",weights["LTHAP"])
cgmFittingProcedure.updateMarkerWeight("LTHAD",weights["LTHAD"])
cgmFittingProcedure.updateMarkerWeight("LTIAP",weights["LTIAP"])
cgmFittingProcedure.updateMarkerWeight("LTIAD",weights["LTIAD"])
cgmFittingProcedure.updateMarkerWeight("RTHAP",weights["RTHAP"])
cgmFittingProcedure.updateMarkerWeight("RTHAD",weights["RTHAD"])
cgmFittingProcedure.updateMarkerWeight("RTIAP",weights["RTIAP"])
cgmFittingProcedure.updateMarkerWeight("RTIAD",weights["RTIAD"])
osrf = opensimFilters.opensimFittingFilter(iksetupFile,
scalingOsim,
cgmFittingProcedure,
(DATA_PATH) )
logging.info("-------INVERSE KINEMATICS IN PROGRESS----------")
acqIK = osrf.run(acqGait,(DATA_PATH + reconstructFilenameLabelled ))
logging.info("-------INVERSE KINEMATICS DONE-----------------")
# eventual gait acquisition to consider for joint kinematics
finalAcqGait = acqIK if ik_flag else acqGait
# --- final pyCGM2 model motion Filter ---
# use fitted markers
modMotionFitted=modelFilters.ModelMotionFilter(scp,finalAcqGait,model,enums.motionMethod.Sodervisk ,
markerDiameter=markerDiameter)
modMotionFitted.compute()
if "displayCoordinateSystem" in kwargs.keys() and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(csp,model,finalAcqGait)
csdf.setStatic(False)
csdf.display()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,finalAcqGait).compute(description="vectoriel", pointLabelSuffix=pointSuffix)
# detection of traveling axis + absolute angle
if model.m_bodypart != enums.BodyPart.UpperLimb:
pfp = progressionFrame.PelvisProgressionFrameProcedure()
else:
pfp = progressionFrame.ThoraxProgressionFrameProcedure()
pff = progressionFrame.ProgressionFrameFilter(finalAcqGait,pfp)
pff.compute()
globalFrame = pff.outputs["globalFrame"]
forwardProgression = pff.outputs["forwardProgression"]
if model.m_bodypart != enums.BodyPart.UpperLimb:
modelFilters.ModelAbsoluteAnglesFilter(model,finalAcqGait,
segmentLabels=["Left Foot","Right Foot","Pelvis"],
angleLabels=["LFootProgress", "RFootProgress","Pelvis"],
eulerSequences=["TOR","TOR", "ROT"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.LowerLimbTrunk:
modelFilters.ModelAbsoluteAnglesFilter(model,finalAcqGait,
segmentLabels=["Thorax"],
angleLabels=["Thorax"],
eulerSequences=["YXZ"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.UpperLimb or model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.ModelAbsoluteAnglesFilter(model,finalAcqGait,
segmentLabels=["Thorax","Head"],
angleLabels=["Thorax", "Head"],
eulerSequences=["YXZ","TOR"],
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression).compute(pointLabelSuffix=pointSuffix)
#---- Body segment parameters----
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
if model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.CentreOfMassFilter(model,finalAcqGait).compute(pointLabelSuffix=pointSuffix)
# Inverse dynamics
if btkTools.checkForcePlateExist(acqGait):
if model.m_bodypart != enums.BodyPart.UpperLimb:
# --- force plate handling----
# find foot in contact
mappedForcePlate = forceplates.matchingFootSideOnForceplate(finalAcqGait,mfpa=mfpa)
forceplates.addForcePlateGeneralEvents(finalAcqGait,mappedForcePlate)
logging.warning("Manual Force plate assignment : %s" %mappedForcePlate)
# assembly foot and force plate
modelFilters.ForcePlateAssemblyFilter(model,finalAcqGait,mappedForcePlate,
leftSegmentLabel="Left Foot",
rightSegmentLabel="Right Foot").compute(pointLabelSuffix=pointSuffix)
#---- Joint kinetics----
idp = modelFilters.CGMLowerlimbInverseDynamicProcedure()
modelFilters.InverseDynamicFilter(model,
finalAcqGait,
procedure = idp,
projection = momentProjection,
globalFrameOrientation = globalFrame,
forwardProgression = forwardProgression
).compute(pointLabelSuffix=pointSuffix)
#---- Joint energetics----
modelFilters.JointPowerFilter(model,finalAcqGait).compute(pointLabelSuffix=pointSuffix)
#---- zero unvalid frames ---
btkTools.applyValidFramesOnOutput(finalAcqGait,validFrames)
return finalAcqGait
def fitting(model, DATA_PATH, reconstructFilenameLabelled, translators,
settings, markerDiameter, pointSuffix, mfpa, momentProjection,
**kwargs):
"""
Fitting of the CGM2.2
:param model [str]: pyCGM2 model previously calibrated
:param DATA_PATH [str]: path to your data
:param reconstructFilenameLabelled [string list]: c3d files
:param translators [dict]: translators to apply
:param mfpa [str]: manual force plate assignement
:param markerDiameter [double]: marker diameter (mm)
:param pointSuffix [str]: suffix to add to model outputs
:param momentProjection [str]: Coordinate system in which joint moment is expressed
"""
# --------------------------ACQUISITION ------------------------------------
# --- btk acquisition ----
if "forceBtkAcq" in kwargs.keys():
acqGait = kwargs["forceBtkAcq"]
else:
acqGait = btkTools.smartReader(
str(DATA_PATH + reconstructFilenameLabelled))
btkTools.checkMultipleSubject(acqGait)
acqGait = btkTools.applyTranslators(acqGait, translators)
trackingMarkers = model.getTrackingMarkers()
validFrames, vff, vlf = btkTools.findValidFrames(acqGait, trackingMarkers)
# --- initial motion Filter ---
scp = modelFilters.StaticCalibrationProcedure(model)
modMotion = modelFilters.ModelMotionFilter(scp, acqGait, model,
enums.motionMethod.Determinist)
modMotion.compute()
# ---OPENSIM IK---
# --- opensim calibration Filter ---
osimfile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\osim\\lowerLimb_ballsJoints.osim" # osimfile
markersetFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm1\\cgm1-markerset.xml" # markerset
cgmCalibrationprocedure = opensimFilters.CgmOpensimCalibrationProcedures(
model) # procedure
oscf = opensimFilters.opensimCalibrationFilter(osimfile, model,
cgmCalibrationprocedure,
str(DATA_PATH))
oscf.addMarkerSet(markersetFile)
scalingOsim = oscf.build()
# --- opensim Fitting Filter ---
iksetupFile = pyCGM2.OPENSIM_PREBUILD_MODEL_PATH + "models\\settings\\cgm1\\cgm1-ikSetUp_template.xml" # ik tool file
cgmFittingProcedure = opensimFilters.CgmOpensimFittingProcedure(
model) # procedure
cgmFittingProcedure.updateMarkerWeight(
"LASI", settings["Fitting"]["Weight"]["LASI"])
cgmFittingProcedure.updateMarkerWeight(
"RASI", settings["Fitting"]["Weight"]["RASI"])
cgmFittingProcedure.updateMarkerWeight(
"LPSI", settings["Fitting"]["Weight"]["LPSI"])
cgmFittingProcedure.updateMarkerWeight(
"RPSI", settings["Fitting"]["Weight"]["RPSI"])
cgmFittingProcedure.updateMarkerWeight(
"RTHI", settings["Fitting"]["Weight"]["RTHI"])
cgmFittingProcedure.updateMarkerWeight(
"RKNE", settings["Fitting"]["Weight"]["RKNE"])
cgmFittingProcedure.updateMarkerWeight(
"RTIB", settings["Fitting"]["Weight"]["RTIB"])
cgmFittingProcedure.updateMarkerWeight(
"RANK", settings["Fitting"]["Weight"]["RANK"])
cgmFittingProcedure.updateMarkerWeight(
"RHEE", settings["Fitting"]["Weight"]["RHEE"])
cgmFittingProcedure.updateMarkerWeight(
"RTOE", settings["Fitting"]["Weight"]["RTOE"])
cgmFittingProcedure.updateMarkerWeight(
"LTHI", settings["Fitting"]["Weight"]["LTHI"])
cgmFittingProcedure.updateMarkerWeight(
"LKNE", settings["Fitting"]["Weight"]["LKNE"])
cgmFittingProcedure.updateMarkerWeight(
"LTIB", settings["Fitting"]["Weight"]["LTIB"])
cgmFittingProcedure.updateMarkerWeight(
"LANK", settings["Fitting"]["Weight"]["LANK"])
cgmFittingProcedure.updateMarkerWeight(
"LHEE", settings["Fitting"]["Weight"]["LHEE"])
cgmFittingProcedure.updateMarkerWeight(
"LTOE", settings["Fitting"]["Weight"]["LTOE"])
osrf = opensimFilters.opensimFittingFilter(iksetupFile, scalingOsim,
cgmFittingProcedure,
str(DATA_PATH))
logging.info("-------INVERSE KINEMATICS IN PROGRESS----------")
acqIK = osrf.run(acqGait, str(DATA_PATH + reconstructFilenameLabelled))
logging.info("-------INVERSE KINEMATICS DONE-----------------")
# --- final pyCGM2 model motion Filter ---
# use fitted markers
modMotionFitted = modelFilters.ModelMotionFilter(
scp,
acqIK,
model,
enums.motionMethod.Determinist,
markerDiameter=markerDiameter)
modMotionFitted.compute()
if "displayCoordinateSystem" in kwargs.keys(
) and kwargs["displayCoordinateSystem"]:
csp = modelFilters.ModelCoordinateSystemProcedure(model)
csdf = modelFilters.CoordinateSystemDisplayFilter(csp, model, acqIK)
csdf.setStatic(False)
csdf.display()
#---- Joint kinematics----
# relative angles
modelFilters.ModelJCSFilter(model,
acqIK).compute(description="vectoriel",
pointLabelSuffix=pointSuffix)
# detection of traveling axis + absolute angle
if model.m_bodypart != enums.BodyPart.UpperLimb:
longitudinalAxis, forwardProgression, globalFrame = btkTools.findProgressionAxisFromPelvicMarkers(
acqIK, ["LASI", "LPSI", "RASI", "RPSI"])
else:
longitudinalAxis, forwardProgression, globalFrame = btkTools.findProgressionAxisFromLongAxis(
acqIK, "C7", "CLAV")
if model.m_bodypart != enums.BodyPart.UpperLimb:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqIK,
segmentLabels=["Left Foot", "Right Foot", "Pelvis"],
angleLabels=["LFootProgress", "RFootProgress", "Pelvis"],
eulerSequences=["TOR", "TOR", "ROT"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.LowerLimbTrunk:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqIK,
segmentLabels=["Thorax"],
angleLabels=["Thorax"],
eulerSequences=["YXZ"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
if model.m_bodypart == enums.BodyPart.UpperLimb or model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.ModelAbsoluteAnglesFilter(
model,
acqIK,
segmentLabels=["Thorax", "Head"],
angleLabels=["Thorax", "Head"],
eulerSequences=["YXZ", "TOR"],
globalFrameOrientation=globalFrame,
forwardProgression=forwardProgression).compute(
pointLabelSuffix=pointSuffix)
#---- Body segment parameters----
bspModel = bodySegmentParameters.Bsp(model)
bspModel.compute()
if model.m_bodypart == enums.BodyPart.FullBody:
modelFilters.CentreOfMassFilter(
model, acqIK).compute(pointLabelSuffix=pointSuffix)
# Inverse dynamics
if model.m_bodypart != enums.BodyPart.UpperLimb:
# --- force plate handling----
# find foot in contact
mappedForcePlate = forceplates.matchingFootSideOnForceplate(acqIK,
mfpa=mfpa)
forceplates.addForcePlateGeneralEvents(acqIK, mappedForcePlate)
logging.warning("Manual Force plate assignment : %s" %
mappedForcePlate)
# assembly foot and force plate
modelFilters.ForcePlateAssemblyFilter(
model,
acqIK,
mappedForcePlate,
leftSegmentLabel="Left Foot",
rightSegmentLabel="Right Foot").compute()
#---- Joint kinetics----
idp = modelFilters.CGMLowerlimbInverseDynamicProcedure()
modelFilters.InverseDynamicFilter(
model,
acqIK,
procedure=idp,
projection=momentProjection,
).compute(pointLabelSuffix=pointSuffix)
#---- Joint energetics----
modelFilters.JointPowerFilter(
model, acqIK).compute(pointLabelSuffix=pointSuffix)
#---- zero unvalid frames ---
btkTools.applyValidFramesOnOutput(acqIK, validFrames)
return acqIK
