class F06Writer(OP2_F06_Common):
def __init__(self):
OP2_F06_Common.__init__(self)
self.card_count = {}
self.additional_matrices = {}
self.subcase_key = defaultdict(list)
self.end_options = {}
self._results = ResultSet(self.get_all_results(),
self.op2_results.get_sum_objects_map(),
self.log)
def get_all_results(self) -> List[str]:
all_results = [
'stress', 'strain', 'element_forces', 'constraint_forces',
'thermal_load'
] + self.get_table_types()
return all_results
def clear_results(self) -> None:
self._results.clear()
def add_results(self, results: Union[str, List[str]]) -> None:
if isinstance(results, str):
results = [results]
all_results = self.get_all_results()
for result in results:
result = str(result)
if result not in all_results:
raise RuntimeError(
'%r is not a valid result to remove; all_results=%s' %
(result, all_results))
if result == 'stress':
stress_results = []
for result in all_results:
if 'stress' in result.lower():
stress_results.append(result)
#stress_results = [result if 'stress' in result.lower() for result in all_results]
self._results.update(stress_results)
elif result == 'strain':
strain_results = []
for result in all_results:
if 'strain' in result.lower():
strain_results.append(result)
#strain_results = [result if 'strain' in result.lower() for result in all_results]
self._results.update(strain_results)
elif 'stress' in result.lower():
self._results.add('stress')
elif 'strain' in result.lower():
self._results.add('strain')
elif result in ('spc_forces', 'mpc_forces', 'constraint_forces'):
self._results.add('constraint_forces')
elif 'force' in result.lower(): # could use more validation...
self._results.add('element_forces')
# thermalLoad_VU_3D, thermalLoad_1D, conv_thermal_load, thermalLoad_2D_3D
self._results.add(result)
def set_results(self, results: Union[str, List[str]]) -> None:
self.clear_results()
self.add_results(results)
def remove_results(self, results: Union[str, List[str]]) -> None:
self._results.remove(results)
def make_f06_header(self):
"""If this class is inherited, the F06 Header may be overwritten"""
return make_f06_header()
def make_stamp(self, title, today, build=None):
"""If this class is inherited, the PAGE stamp may be overwritten"""
return make_stamp(title, today, build=None)
def make_grid_point_singularity_table(self, failed):
"""
creates a grid point singularity table
Parameters
----------
failed : List[(nid, component), ...]
defines failed degrees of freedom
"""
msg = ''
if failed:
msg += '0 G R I D P O I N T S I N G U L A R I T Y T A B L E\n'
msg += '0 POINT TYPE FAILED STIFFNESS OLD USET NEW USET\n'
msg += ' ID DIRECTION RATIO EXCLUSIVE UNION EXCLUSIVE UNION\n'
for (nid, dof) in failed:
msg += ' %8s G %s 0.00E+00 B F SB SB *\n' % (
nid, dof)
else:
msg += 'No constraints have been applied...\n'
page_stamp = self.make_stamp(self.title, self.date)
msg += page_stamp % self.page_num
self.page_num += 1
return msg
def _write_summary(self, f06_file, card_count=None):
"""writes the F06 card summary table"""
summary_header = ' M O D E L S U M M A R Y\n\n'
summary = ''
self.cards_to_read = {
# rigid elements
'RBAR',
'RBAR1',
'RBE1',
'RBE2',
'RBE3',
# spc/mpc constraints
'SPC',
'SPCADD',
'SPC1',
'SPCD',
'SPCAX',
'MPC',
'MPCADD',
'SUPORT',
'SUPORT1',
# aero cards
'CAERO1',
'CAERO2',
'CAERO3',
'CAERO4',
'CAERO5',
# temperature cards
'CHBDYE',
'CHBDYG',
'CHBDYP',
'CONV',
}
blocks = [
['POINTS', [
'GRID',
'GRDSET',
]],
['ENTRIES', ['SPOINT']],
[
'ELEMENTS',
[
# these are sorted
# elements
'CONM1',
'CONM2',
'CMASS1',
'CMASS2',
'CMASS3',
'CMASS4',
# springs
'CELAS1',
'CELAS2',
'CELAS3',
'CELAS4',
'CELAS5',
# bushings
'CBUSH',
'CBUSH1D',
'CBUSH2D',
# dampers
'CDAMP1',
'CDAMP2',
'CDAMP3',
'CDAMP4',
'CDAMP5',
# bar flags
'BAROR',
'CBARAO',
# bars
'CBAR',
'CROD',
'CTUBE',
'BEAMOR',
'CBEAM',
'CBEAM3',
'CONROD',
'CBEND',
# shells
'CTRIA3',
'CTRIA6',
'CTRIAR',
'CTRIAX',
'CTRIAX6',
'CQUAD4',
'CQUAD8',
'CQUADR',
'CQUADX',
'CQUAD',
# solids
'CTETRA',
'CPENTA',
'CHEXA',
# other
'CSHEAR',
'CVISC',
'CRAC2D',
'CRAC3D',
'CGAP',
'CFAST',
'RBE2',
'RBE3',
# thermal
'CHBDYP',
'CHBDYG',
'CONV',
]
],
]
#print("self.card_count", self.card_count)
if card_count is None:
card_count = self.card_count
for block in blocks:
block_name, keys = block
key_count = 0
for key in sorted(keys):
try:
value = card_count[key]
summary += ' NUMBER OF %-8s %-8s = %8s\n' % (
key, block_name, value)
key_count += 1
except KeyError:
pass
if key_count:
summary += ' \n'
if summary:
f06_file.write(summary_header)
f06_file.write(summary)
page_stamp = self.make_stamp(self.title, self.date)
f06_file.write(page_stamp % self.page_num)
self.page_num += 1
def write_f06(self,
f06_outname: str,
matrix_filename: Optional[str] = None,
is_mag_phase: bool = False,
is_sort1: bool = True,
delete_objects: bool = True,
end_flag: bool = False,
quiet: bool = True,
repr_check: bool = False,
close: bool = True) -> None:
"""
Writes an F06 file based on the data we have stored in the object
Parameters
----------
f06_outname : str
the name of the F06 file to write
matrix_filename : str; default=None
str : the name of the .mat file to write
None : based on f06_outname
is_mag_phase : bool; default=False
should complex data be written using Magnitude/Phase
instead of Real/Imaginary
Real objects don't use this parameter
is_sort1 : bool; default=True
writes output in SORT1 format if the output is transient;
ignored for static analyses
delete_objects : bool; default=True
should objects be deleted after they're written to reduce memory
end_flag : bool; default=False
should a dummy Nastran "END" table be made
quiet : bool; default=False
suppress print messages
repr_check: bool; defualt=False
calls the object repr as a validation test (prints nothing)
close : bool; default=True
close the f06 file
"""
if not quiet:
print("F06:")
if isinstance(f06_outname, str):
if matrix_filename is None:
matrix_filename = os.path.splitext(f06_outname)[0] + '.mat'
#print("matrix_filename =", matrix_filename)
#mat = open(matrix_filename, 'wb')
f06 = open(f06_outname, 'w')
self._write_summary(f06)
elif hasattr(f06_outname, 'read') and hasattr(f06_outname, 'write'):
#f06 = f06_outname
#else:
#print('type(f06_outname) =', type(f06_outname))
#assert isinstance(f06_outname, file), 'type(f06_outname)= %s' % f06_outname
f06 = f06_outname
f06_outname = f06.name
if matrix_filename is None:
matrix_filename = os.path.splitext(f06_outname)[0] + '.mat'
if not quiet:
print('f06_outname =', f06_outname)
page_stamp = self.make_stamp(self.title, self.date)
if self.grid_point_weight:
if not quiet:
print(" grid_point_weight")
for key, weight in self.grid_point_weight.items():
self.page_num = weight.write_f06(f06, page_stamp,
self.page_num)
if repr_check:
str(self.grid_point_weight)
assert isinstance(self.page_num,
int), self.grid_point_weight.__class__.__name__
if self.oload_resultant is not None:
self.page_num = self.oload_resultant.write_f06(
f06, page_stamp, self.page_num)
if repr_check:
str(self.oload_resultant)
assert isinstance(self.page_num,
int), self.oload_resultant.__class__.__name__
# writes all results for
self._write_f06_subcase_based(f06,
page_stamp,
delete_objects=delete_objects,
is_mag_phase=is_mag_phase,
is_sort1=is_sort1,
quiet=quiet,
repr_check=repr_check)
self.op2_results.psds.write_f06(f06)
#self._write_f06_time_based(f06, page_stamp)
self.write_matrices(f06,
matrix_filename,
page_stamp,
self.page_num,
quiet=quiet)
f06.write(make_end(end_flag, self.end_options))
if close:
f06.close()
def write_matrices(self,
f06,
matrix_filename,
page_stamp,
page_num,
quiet=True):
"""writes the f06 matrices"""
if len(self.matrices):
if hasattr(self, 'monitor1'):
page_num = self.monitor1.write(f06,
page_stamp=page_stamp,
page_num=page_num)
self.log.debug('MONPNT1 from [PMRF, PERF, PFRF, AGRF]')
with open(matrix_filename, 'wb') as mat:
for name, matrix in self.matrices.items():
if name == 'MP3F':
page_num = self.monitor3.write(f06,
page_stamp=page_stamp,
page_num=page_num)
self.log.debug('MONPNT3 from MP3F')
elif name in ['PMRF', 'PERF', 'PFRF', 'AGRF']:
pass
else:
if not quiet:
print(matrix)
matrix.write(mat)
def _write_f06_subcase_based(self,
f06,
page_stamp,
delete_objects=True,
is_mag_phase=False,
is_sort1=True,
quiet=False,
repr_check=False):
"""
Helper function for ``write_f06`` that does the real work
Parameters
----------
f06 : file
the opened file object
page_stamp : str
the format string stamp is the ending to every F06 page that
contains the version, date, and page number
(e.g., 'pyNastran 0.8 1/1/2016 PAGE %%i')
is_mag_phase : bool; default=False
should complex data be written using Magnitude/Phase
instead of Real/Imaginary
Real objects don't use this parameter
is_sort1 : bool; default=True
writes output in SORT1 format if the output is transient;
ignored for static analyses
delete_objects : bool; default=True
should objects be deleted after they're written to reduce memory
quiet : bool; default=False
suppress print messages
repr_check: bool; defualt=False
calls the object repr as a validation test (prints nothing)
"""
is_failed = False
header = [
' DEFAULT \n',
'\n', ''
]
# eigenvalues are written first
f06.write(page_stamp % self.page_num)
self.page_num += 1
for ikey, result in sorted(self.eigenvalues.items()):
if not quiet:
print('%-18s case=%r' % (result.__class__.__name__, ikey))
self.page_num = result.write_f06(f06,
header,
page_stamp,
page_num=self.page_num)
if repr_check:
str(result)
assert isinstance(self.page_num,
int), 'pageNum=%r' % str(self.page_num)
if delete_objects:
del result
self.page_num += 1
# then eigenvectors
# has a special header
# isubcases = sorted(self.isubcase_name_map.keys())
# TODO: superelement version...need the nominal...
res_keys_subcase = self.subcase_key
if len(res_keys_subcase) == 0:
self.log.warning('no cases to write...self.subcase_key=%r' %
self.subcase_key)
return
for isubcase, res_keys in sorted(res_keys_subcase.items()):
for res_key in res_keys:
if isinstance(res_key, tuple):
pass
#is_compressed = False
else:
# int
#is_compressed = True
isubcase = res_key
if res_key not in self.eigenvectors:
continue
result = self.eigenvectors[res_key]
if repr_check:
str(result)
subtitle = result.subtitle
header[0] = ' %s\n' % subtitle
header[
1] = '0 SUBCASE %i\n' % isubcase
#header[2] = complex/nonlinear
res_length = 18
res_format = '*%%-%is SUBCASE=%%i' % res_length
res_format_vectorized = ' %%-%is SUBCASE=%%i SUBTITLE=%%s' % res_length
class_name = result.__class__.__name__
if hasattr(result, 'data'):
if not quiet:
print(res_format_vectorized %
(class_name, isubcase, subtitle))
else:
print(res_format % (class_name, isubcase))
self.page_num = result.write_f06(f06,
header,
page_stamp,
self.page_num,
is_mag_phase=is_mag_phase,
is_sort1=True)
assert isinstance(self.page_num,
int), 'pageNum=%r' % str(self.page_num)
if delete_objects:
del result
self.page_num += 1
# finally, we writte all the other tables
# nastran puts the tables in order of the Case Control deck,
# but we're lazy so we just hardcode the order
# subcase name, subcase ID, transient word & value
header_old = [
' DEFAULT \n',
'\n', ' \n'
]
header = copy.deepcopy(header_old)
unallowed_results = [
'eigenvectors', 'eigenvalues', 'params', 'gpdt', 'bgpdt', 'eqexin',
'grid_point_weight', 'psds'
]
res_types = list(
self.get_result(table_type)
for table_type in sorted(self.get_table_types())
if table_type not in unallowed_results
and not table_type.startswith('responses.'))
for isubcase, res_keys in sorted(res_keys_subcase.items()):
for res_key in res_keys:
#if isinstance(res_key, tuple):
#is_compressed = False
#else:
#is_compressed = True
res_length = self._get_result_length(res_types, res_key)
if res_length == 0:
# skipped subcase; no saved results
continue
res_format = '*%%-%is SUBCASE=%%i%%s' % res_length
res_format_vectorized = ' %%-%is SUBCASE=%%i SUBTITLE=%%s %%s' % res_length
for res_type in res_types:
if res_key not in res_type:
continue
result = res_type[res_key]
if repr_check:
str(result)
subtitle = result.subtitle
label = result.label
header = ['', '']
header[0] = ' %-126s\n' % subtitle
header[
1] = '0 %-32s SUBCASE %-15i\n \n' % (
label, isubcase)
if result.nonlinear_factor is not None:
header.append('')
try:
class_name = result.__class__.__name__
element_name = ''
if hasattr(result, 'element_name'):
element_name = ' - ' + result.element_name
is_ignored = 'StrainEnergy' not in class_name and 'GridPointForces' not in class_name
has_nnodes = not hasattr(result,
'nnodes_per_element')
if has_nnodes and is_ignored and getpass.getuser(
) == 'sdoyle':
self.log.error(
f'{class_name} is missing nnodes_per_element'
)
if hasattr(result, 'data'):
if not quiet:
print(res_format_vectorized %
(class_name, isubcase, subtitle,
element_name))
else:
print(res_format %
(class_name, isubcase, element_name))
result.is_complex
result.is_real
try:
self.page_num = result.write_f06(
f06,
header,
page_stamp,
page_num=self.page_num,
is_mag_phase=is_mag_phase,
is_sort1=is_sort1)
except Exception as error:
print_exc(file=sys.stdout)
print(''.join(result.get_stats()))
raise
#assert 'table_name=' in ''.join(result.get_stats())
assert isinstance(
self.page_num,
int), 'result=%s pageNum=%r' % (result,
str(self.page_num))
except:
#print("result name = %r" % result.name())
raise
if delete_objects:
del result
self.page_num += 1
class F06Writer(OP2_F06_Common):
def __init__(self):
OP2_F06_Common.__init__(self)
self.card_count = {}
self.additional_matrices = {}
self.matrices = {}
self.subcase_key = defaultdict(list)
self.end_options = {}
self._results = ResultSet(self.get_all_results())
def get_all_results(self):
all_results = [
'stress', 'strain', 'element_forces', 'constraint_forces'
] + self.get_table_types()
return all_results
def clear_results(self):
self._results.clear()
def add_results(self, results):
if isinstance(results, string_types):
results = [results]
all_results = self.get_all_results()
for result in results:
result = str(result)
if result not in all_results:
raise RuntimeError(
'%r is not a valid result to remove; all_results=%s' %
(result, all_results))
if result == 'stress':
stress_results = []
for result in all_results:
if 'stress' in result.lower():
stress_results.append(result)
#stress_results = [result if 'stress' in result.lower() for result in all_results]
self._results.update(stress_results)
elif result == 'strain':
strain_results = []
for result in all_results:
if 'strain' in result.lower():
strain_results.append(result)
#strain_results = [result if 'strain' in result.lower() for result in all_results]
self._results.update(strain_results)
elif 'stress' in result.lower():
self._results.add('stress')
elif 'strain' in result.lower():
self._results.add('strain')
elif result in ('spc_forces', 'mpc_forces', 'constraint_forces'):
self._results.add('constraint_forces')
elif 'force' in result.lower(): # could use more validation...
self._results.add('element_forces')
# thermalLoad_VU_3D, thermalLoad_1D, conv_thermal_load, thermalLoad_2D_3D
self._results.add(result)
def set_results(self, results):
if isinstance(results, string_types):
results = [results]
self.clear_results()
self.add_results(results)
def remove_results(self, results):
self._results.remove(results)
def make_f06_header(self):
"""If this class is inherited, the F06 Header may be overwritten"""
return make_f06_header()
def make_stamp(self, title, today):
"""If this class is inherited, the PAGE stamp may be overwritten"""
return make_stamp(title, today)
def make_grid_point_singularity_table(self, failed):
"""
creates a grid point singularity table
Parameters
----------
failed : List[(nid, component), ...]
defines failed degrees of freedom
"""
msg = ''
if failed:
msg += '0 G R I D P O I N T S I N G U L A R I T Y T A B L E\n'
msg += '0 POINT TYPE FAILED STIFFNESS OLD USET NEW USET\n'
msg += ' ID DIRECTION RATIO EXCLUSIVE UNION EXCLUSIVE UNION\n'
for (nid, dof) in failed:
msg += ' %8s G %s 0.00E+00 B F SB SB *\n' % (
nid, dof)
else:
msg += 'No constraints have been applied...\n'
page_stamp = self.make_stamp(self.title, self.date)
msg += page_stamp % self.page_num
self.page_num += 1
return msg
def _write_summary(self, f06, card_count=None):
"""writes the F06 card summary table"""
summary_header = ' M O D E L S U M M A R Y\n\n'
summary = ''
self.cards_to_read = set([
# rigid elements
'RBAR',
'RBAR1',
'RBE1',
'RBE2',
'RBE3',
# spc/mpc constraints
'SPC',
'SPCADD',
'SPC1',
'SPCD',
'SPCAX',
'MPC',
'MPCADD',
'SUPORT',
'SUPORT1',
# aero cards
'CAERO1',
'CAERO2',
'CAERO3',
'CAERO4',
'CAERO5',
# temperature cards
'CHBDYE',
'CHBDYG',
'CHBDYP',
'CONV',
])
blocks = [
['POINTS', [
'GRID',
'GRDSET',
]],
['ENTRIES', ['SPOINT']],
[
'ELEMENTS',
[
# these are sorted
# elements
'CONM1',
'CONM2',
'CMASS1',
'CMASS2',
'CMASS3',
'CMASS4',
# springs
'CELAS1',
'CELAS2',
'CELAS3',
'CELAS4',
'CELAS5',
# bushings
'CBUSH',
'CBUSH1D',
'CBUSH2D',
# dampers
'CDAMP1',
'CDAMP2',
'CDAMP3',
'CDAMP4',
'CDAMP5',
# bar flags
'BAROR',
'CBARAO',
# bars
'CBAR',
'CROD',
'CTUBE',
'BEAMOR',
'CBEAM',
'CBEAM3',
'CONROD',
'CBEND',
# shells
'CTRIA3',
'CTRIA6',
'CTRIAR',
'CTRIAX',
'CTRIAX6',
'CQUAD4',
'CQUAD8',
'CQUADR',
'CQUADX',
'CQUAD',
# solids
'CTETRA',
'CPENTA',
'CHEXA',
# other
'CSHEAR',
'CVISC',
'CRAC2D',
'CRAC3D',
'CGAP',
'CFAST',
'RBE2',
'RBE3',
# thermal
'CHBDYP',
'CHBDYG',
'CONV',
]
],
]
#print("self.card_count", self.card_count)
if card_count is None:
card_count = self.card_count
for block in blocks:
block_name, keys = block
key_count = 0
for key in sorted(keys):
try:
value = card_count[key]
summary += ' NUMBER OF %-8s %-8s = %8s\n' % (
key, block_name, value)
key_count += 1
except KeyError:
pass
if key_count:
summary += ' \n'
if summary:
f06.write(summary_header)
f06.write(summary)
page_stamp = self.make_stamp(self.title, self.date)
f06.write(page_stamp % self.page_num)
self.page_num += 1
def write_f06(self,
f06_outname,
matrix_filename=None,
is_mag_phase=False,
is_sort1=True,
delete_objects=True,
end_flag=False,
quiet=True,
repr_check=False,
close=True):
"""
Writes an F06 file based on the data we have stored in the object
Parameters
----------
f06_outname : str
the name of the F06 file to write
matrix_filename : str; default=None
str : the name of the .mat file to write
None : based on f06_outname
is_mag_phase : bool; default=False
should complex data be written using Magnitude/Phase
instead of Real/Imaginary
Real objects don't use this parameter
is_sort1 : bool; default=True
writes output in SORT1 format if the output is transient;
ignored for static analyses
delete_objects : bool; default=True
should objects be deleted after they're written to reduce memory
end_flag : bool; default=False
should a dummy Nastran "END" table be made
quiet : bool; default=False
suppress print messages
repr_check: bool; defualt=False
calls the object repr as a validation test (prints nothing)
close : bool; default=True
close the f06 file
"""
if not quiet:
print("F06:")
if isinstance(f06_outname, str):
if matrix_filename is None:
matrix_filename = os.path.splitext(f06_outname)[0] + '.mat'
#print("matrix_filename =", matrix_filename)
#mat = open(matrix_filename, 'wb')
if PY2:
f06 = open(f06_outname, 'wb')
else:
f06 = open(f06_outname, 'w')
self._write_summary(f06)
elif hasattr(f06_outname, 'read') and hasattr(f06_outname, 'write'):
#f06 = f06_outname
#else:
#print('type(f06_outname) =', type(f06_outname))
#assert isinstance(f06_outname, file), 'type(f06_outname)= %s' % f06_outname
f06 = f06_outname
f06_outname = f06.name
if matrix_filename is None:
matrix_filename = os.path.splitext(f06_outname)[0] + '.mat'
if not quiet:
print('f06_outname =', f06_outname)
page_stamp = self.make_stamp(self.title, self.date)
if self.grid_point_weight.reference_point is not None:
if not quiet:
print(" grid_point_weight")
self.page_num = self.grid_point_weight.write_f06(
f06, page_stamp, self.page_num)
if repr_check:
str(self.grid_point_weight)
assert isinstance(self.page_num,
int), self.grid_point_weight.__class__.__name__
if self.oload_resultant is not None:
self.page_num = self.oload_resultant.write_f06(
f06, page_stamp, self.page_num)
if repr_check:
str(self.oload_resultant)
assert isinstance(self.page_num,
int), self.oload_resultant.__class__.__name__
# writes all results for
self._write_f06_subcase_based(f06,
page_stamp,
delete_objects=delete_objects,
is_mag_phase=is_mag_phase,
is_sort1=is_sort1,
quiet=quiet,
repr_check=repr_check)
#self._write_f06_time_based(f06, page_stamp)
self.write_matrices(f06,
matrix_filename,
page_stamp,
self.page_num,
quiet=quiet)
f06.write(make_end(end_flag, self.end_options))
if close:
f06.close()
def write_matrices(self,
f06,
matrix_filename,
page_stamp,
page_num,
quiet=True):
"""writes the f06 matrices"""
if len(self.matrices):
if hasattr(self, 'monitor1'):
page_num = self.monitor1.write(f06,
page_stamp=page_stamp,
page_num=page_num)
print('MONPNT1 from [PMRF, PERF, PFRF, AGRF]')
with open(matrix_filename, 'wb') as mat:
for name, matrix in iteritems(self.matrices):
if name == 'MP3F':
page_num = self.monitor3.write(f06,
page_stamp=page_stamp,
page_num=page_num)
print('MONPNT3 from MP3F')
elif name in ['PMRF', 'PERF', 'PFRF', 'AGRF']:
pass
else:
if not quiet:
print(matrix)
matrix.write(mat)
def _write_f06_subcase_based(self,
f06,
page_stamp,
delete_objects=True,
is_mag_phase=False,
is_sort1=True,
quiet=False,
repr_check=False):
"""
Helper function for ``write_f06`` that does the real work
Parameters
----------
f06 : file
the opened file object
page_stamp : str
the format string stamp is the ending to every F06 page that
contains the version, date, and page number
(e.g., 'pyNastran 0.8 1/1/2016 PAGE %%i')
is_mag_phase : bool; default=False
should complex data be written using Magnitude/Phase
instead of Real/Imaginary
Real objects don't use this parameter
is_sort1 : bool; default=True
writes output in SORT1 format if the output is transient;
ignored for static analyses
delete_objects : bool; default=True
should objects be deleted after they're written to reduce memory
quiet : bool; default=False
suppress print messages
repr_check: bool; defualt=False
calls the object repr as a validation test (prints nothing)
"""
is_failed = False
header = [
' DEFAULT \n',
'\n', ''
]
# eigenvalues are written first
f06.write(page_stamp % self.page_num)
self.page_num += 1
for ikey, result in sorted(iteritems(self.eigenvalues)):
if not quiet:
print('%-18s case=%r' % (result.__class__.__name__, ikey))
self.page_num = result.write_f06(f06,
header,
page_stamp,
page_num=self.page_num)
if repr_check:
str(result)
assert isinstance(self.page_num,
int), 'pageNum=%r' % str(self.page_num)
if delete_objects:
del result
self.page_num += 1
# then eigenvectors
# has a special header
# isubcases = sorted(self.isubcase_name_map.keys())
# TODO: superelement version...need the nominal...
res_keys_subcase = self.subcase_key
if len(res_keys_subcase) == 0:
self.log.warning('no cases to write...self.subcase_key=%r' %
self.subcase_key)
return
for isubcase, res_keys in sorted(iteritems(res_keys_subcase)):
for res_key in res_keys:
if isinstance(res_key, tuple):
is_compressed = False
else:
# int
is_compressed = True
isubcase = res_key
if res_key not in self.eigenvectors:
continue
result = self.eigenvectors[res_key]
if repr_check:
str(result)
subtitle = result.subtitle
header[0] = ' %s\n' % subtitle
header[
1] = '0 SUBCASE %i\n' % isubcase
#header[2] = complex/nonlinear
res_length = 18
res_format = '*%%-%is SUBCASE=%%i' % res_length
res_format_vectorized = ' %%-%is SUBCASE=%%i SUBTITLE=%%s' % res_length
class_name = result.__class__.__name__
if hasattr(result, 'data'):
if not quiet:
print(res_format_vectorized %
(class_name, isubcase, subtitle))
else:
print(res_format % (class_name, isubcase))
self.page_num = result.write_f06(f06,
header,
page_stamp,
self.page_num,
is_mag_phase=is_mag_phase,
is_sort1=True)
assert isinstance(self.page_num,
int), 'pageNum=%r' % str(self.page_num)
if delete_objects:
del result
self.page_num += 1
# finally, we writte all the other tables
# nastran puts the tables in order of the Case Control deck,
# but we're lazy so we just hardcode the order
# subcase name, subcase ID, transient word & value
header_old = [
' DEFAULT \n',
'\n', ' \n'
]
header = copy.deepcopy(header_old)
unallowed_results = ['eigenvectors', 'eigenvalues']
res_types = list(
self.get_result(table_type)
for table_type in sorted(self.get_table_types())
if table_type not in unallowed_results)
#ROUGV1 = self.op2_results.ROUGV1
#psd = self.op2_results.psd
#ato = self.op2_results.ato
#rms = self.op2_results.rms
#crm = self.op2_results.crm
#no = self.op2_results.no
#modal_contribution = self.op2_results.modal_contribution
#res_types = [
#self.displacements, ROUGV1.displacements, psd.displacements, ato.displacements, rms.displacements, crm.displacements, no.displacements, self.displacements_scaled, # ???
#self.accelerations, ROUGV1.accelerations, psd.accelerations, ato.accelerations, rms.accelerations, crm.accelerations, no.accelerations,
#self.velocities, ROUGV1.velocities, psd.velocities, ato.velocities, rms.velocities, crm.velocities, no.velocities,
#self.force_vectors,
#self.load_vectors, ato.load_vectors, crm.load_vectors, psd.load_vectors, no.load_vectors,
#self.temperatures,
#self.eigenvectors,
#self.eigenvectors_RADCONS,
#self.eigenvectors_RADEFFM,
#self.eigenvectors_RADEATC,
#self.eigenvectors_ROUGV1,
#self.mpc_forces, psd.mpc_forces, ato.mpc_forces, rms.mpc_forces,
##self.mpc_forces_RAQCONS,
##self.mpc_forces_RAQEATC,
#self.spc_forces, psd.spc_forces, ato.spc_forces, rms.spc_forces,
#self.thermal_load_vectors,
##self.strain_energy,
#self.cquad4_strain_energy, self.cquad8_strain_energy,
#self.cquadr_strain_energy, self.cquadx_strain_energy,
#self.ctria3_strain_energy, self.ctria6_strain_energy,
#self.ctriar_strain_energy, self.ctriax_strain_energy,
#self.ctriax6_strain_energy,
#self.ctetra_strain_energy, self.cpenta_strain_energy,
#self.chexa_strain_energy, self.cpyram_strain_energy,
#self.crod_strain_energy, self.ctube_strain_energy,
#self.conrod_strain_energy,
#self.cbar_strain_energy, self.cbeam_strain_energy,
#self.cgap_strain_energy, self.cbush_strain_energy,
#self.celas1_strain_energy, self.celas2_strain_energy,
#self.celas3_strain_energy, self.celas4_strain_energy,
#self.cdum8_strain_energy, self.dmig_strain_energy,
#self.cbend_strain_energy, self.conm2_strain_energy,
#self.genel_strain_energy, self.cshear_strain_energy,
##------------------------------------------
## OEF - forces
## alphabetical order...
## bars
#self.cbar_force, ato.cbar_force, crm.cbar_force, psd.cbar_force, rms.cbar_force, no.cbar_force,
#self.cbar_force_10nodes,
## beam
#self.cbend_force,
#self.cbeam_force, ato.cbeam_force, crm.cbeam_force, psd.cbeam_force, rms.cbeam_force, no.cbeam_force,
#self.cbeam_force_vu,
## alphabetical
#self.celas1_force,
#self.celas2_force,
#self.celas3_force,
#self.celas4_force,
#self.cquad4_force, ato.cquad4_force, crm.cquad4_force, psd.cquad4_force, rms.cquad4_force, no.cquad4_force,
#self.cquad8_force, ato.cquad8_force, crm.cquad8_force, psd.cquad8_force, rms.cquad8_force, no.cquad8_force,
#self.cquadr_force, ato.cquadr_force, crm.cquadr_force, psd.cquadr_force, rms.cquadr_force, no.cquadr_force,
#self.conrod_force,
#self.crod_force,
#self.cshear_force,
#self.ctria3_force, ato.ctria3_force, crm.ctria3_force, psd.ctria3_force, rms.ctria3_force, no.ctria3_force,
#self.ctria6_force, ato.ctria3_force, crm.ctria6_force, psd.ctria6_force, rms.ctria6_force, no.ctria6_force,
#self.ctriar_force, ato.ctriar_force, crm.ctriar_force, psd.ctriar_force, rms.ctriar_force, no.ctriar_force,
#self.ctube_force,
## springs
#self.celas1_force,
#self.celas2_force,
#self.celas3_force,
#self.celas4_force,
## dampers
#self.cdamp1_force,
#self.cdamp2_force,
#self.cdamp3_force,
#self.cdamp4_force,
## other
#self.cbush_force, ato.cbush_force, crm.cbush_force, psd.cbush_force, rms.cbush_force, no.cbush_force,
#self.cgap_force,
#self.cvisc_force,
#self.chexa_pressure_force,
#self.cpenta_pressure_force,
#self.ctetra_pressure_force,
#self.coneax_force,
##------------------------------------------
## OES - strain
## 1. cbar
## 2. cbeam
## 3. crod/ctube/conrod
## springs
#self.celas1_strain,
#self.celas2_strain,
#self.celas3_strain,
#self.celas4_strain,
#self.nonlinear_celas1_stress,
#self.nonlinear_celas3_stress,
## bars/beams
#self.cbar_strain, ato.cbar_strain, crm.cbar_strain, psd.cbar_strain, rms.cbar_strain, no.cbar_strain,
#self.cbar_strain_10nodes,
#self.cbeam_strain,
## plates
#self.cquad4_composite_strain,
#self.cquad8_composite_strain,
#self.cquadr_composite_strain,
#self.ctria3_composite_strain,
#self.ctria6_composite_strain,
#self.ctriar_composite_strain,
#self.nonlinear_ctria3_strain,
#self.nonlinear_cquad4_strain,
#self.ctriax_strain,
## rods
#self.nonlinear_crod_strain,
#self.nonlinear_ctube_strain,
#self.nonlinear_conrod_strain,
#self.chexa_strain, modal_contribution.chexa_strain,
#self.conrod_strain, modal_contribution.conrod_strain,
#self.cpenta_strain, modal_contribution.cpenta_strain,
#self.cquad4_strain, modal_contribution.cquad4_strain,
#self.cquad8_strain, modal_contribution.cquad8_strain,
#self.cquadr_strain, modal_contribution.cquadr_strain,
#self.crod_strain, modal_contribution_crod_strain,
#self.cshear_strain, modal_contribution.cshear_strain,
#self.ctetra_strain, modal_contribution.ctetra_strain,
#self.ctria3_strain, modal_contribution.ctria3_strain,
#self.ctria6_strain, modal_contribution.ctria6_strain,
#self.ctriar_strain, modal_contribution.ctriar_strain,
#self.ctube_strain, modal_contribution.ctube_strain,
## bush
#self.cbush_strain,
#self.nonlinear_cbush_stress,
#self.cbush1d_stress_strain,
##------------------------------------------
## cbars/cbeams
#self.cbar_stress, ato.cbar_stress, crm.cbar_stress, psd.cbar_stress, rms.cbar_stress, no.cbar_stress,
#self.cbar_stress_10nodes,
#self.nonlinear_cbeam_stress,
#self.cbeam_stress,
## bush
#self.cbush_stress,
## rods
#self.nonlinear_crod_stress,
#self.nonlinear_ctube_stress,
#self.nonlinear_conrod_stress,
## shear
## OES - stress
#self.celas1_stress, modal_contribution.celas1_stress,
#self.celas2_stress, modal_contribution.celas2_stress,
#self.celas3_stress, modal_contribution.celas3_stress,
#self.celas4_stress, modal_contribution.celas4_stress,
#self.chexa_stress,
#self.conrod_stress,
#self.cpenta_stress,
#self.cquad4_stress,
#self.cquad8_stress,
#self.cquadr_stress,
#self.crod_stress,
#self.cshear_stress,
#self.ctetra_stress,
#self.ctria3_stress,
#self.ctria6_stress,
#self.ctriar_stress,
#self.ctube_stress,
#self.cquad4_composite_stress,
#self.cquad8_composite_stress,
#self.cquadr_composite_stress,
#self.ctria3_composite_stress,
#self.ctria6_composite_stress,
#self.ctriar_composite_stress,
#self.nonlinear_ctria3_stress,
#self.nonlinear_cquad4_stress,
#self.ctriax_stress,
#self.hyperelastic_cquad4_strain,
##------------------------------------------
##OEF - Fluxes - tCode=4 thermal=1
#self.conv_thermal_load,
##self.thermalLoad_CHBDY,
#self.chbdye_thermal_load,
#self.chbdyg_thermal_load,
#self.chbdyp_thermal_load,
#self.chbdye_thermal_load_flux,
#self.chbdyg_thermal_load_flux,
#self.chbdyp_thermal_load_flux,
##self.thermalLoad_1D,
#self.crod_thermal_load,
#self.cbeam_thermal_load,
#self.ctube_thermal_load,
#self.conrod_thermal_load,
#self.cbar_thermal_load,
#self.cbend_thermal_load,
#self.crod_thermal_load_flux,
#self.cbeam_thermal_load_flux,
#self.ctube_thermal_load_flux,
#self.conrod_thermal_load_flux,
#self.cbar_thermal_load_flux,
#self.cbend_thermal_load_flux,
##self.thermalLoad_2D_3D,
#self.cquad4_thermal_load,
#self.ctriax6_thermal_load,
#self.cquad8_thermal_load,
#self.ctria3_thermal_load,
#self.ctria6_thermal_load,
#self.ctetra_thermal_load,
#self.chexa_thermal_load,
#self.cpenta_thermal_load,
#self.cquad4_thermal_load_flux,
#self.ctriax6_thermal_load_flux,
#self.cquad8_thermal_load_flux,
#self.ctria3_thermal_load_flux,
#self.ctria6_thermal_load_flux,
#self.ctetra_thermal_load_flux,
#self.chexa_thermal_load_flux,
#self.cpenta_thermal_load_flux,
#self.thermalLoad_VU,
#self.thermalLoad_VU_3D,
#self.vu_beam_thermal_load,
#self.vu_quad_force,
#self.vu_tria_force,
##------------------------------------------
#self.grid_point_stresses, self.grid_point_volume_stresses, self.grid_point_forces,
#]
for isubcase, res_keys in sorted(iteritems(res_keys_subcase)):
# print(res_keys)
for res_key in res_keys:
if isinstance(res_key, tuple):
is_compressed = False
else:
is_compressed = True
res_length = self._get_result_length(res_types, res_key)
if res_length == 0:
# skipped subcase; no saved results
continue
res_format = '*%%-%is SUBCASE=%%i%%s' % res_length
res_format_vectorized = ' %%-%is SUBCASE=%%i SUBTITLE=%%s %%s' % res_length
for res_type in res_types:
if res_key not in res_type:
continue
result = res_type[res_key]
if repr_check:
str(result)
subtitle = result.subtitle
label = result.label
header = ['', '']
header[0] = ' %-126s\n' % subtitle
header[
1] = '0 %-32s SUBCASE %-15i\n \n' % (
label, isubcase)
if result.nonlinear_factor is not None:
header.append('')
try:
element_name = ''
if hasattr(result, 'element_name'):
element_name = ' - ' + result.element_name
class_name = result.__class__.__name__
if hasattr(result, 'data'):
if not quiet:
print(res_format_vectorized %
(class_name, isubcase, subtitle,
element_name))
else:
print(res_format %
(class_name, isubcase, element_name))
try:
self.page_num = result.write_f06(
f06,
header,
page_stamp,
page_num=self.page_num,
is_mag_phase=is_mag_phase,
is_sort1=is_sort1)
except Exception as error:
print_exc(file=sys.stdout)
print(''.join(result.get_stats()))
raise
#assert 'table_name=' in ''.join(result.get_stats())
assert isinstance(
self.page_num,
int), 'pageNum=%r' % str(self.page_num)
except:
#print("result name = %r" % result.name())
raise
if delete_objects:
del result
self.page_num += 1