def _setupMedia(self, device):
method = self.data.method
if method.method == "harddrive":
self._setupDevice(device, mountpoint=ISO_DIR)
# check for ISO images in the newly mounted dir
path = ISO_DIR
if method.dir:
path = os.path.normpath("%s/%s" % (path, method.dir))
# XXX it would be nice to streamline this when we're just setting
# things back up after storage activation instead of having to
# pretend we don't already know which ISO image we're going to
# use
image = findFirstIsoImage(path)
if not image:
device.teardown(recursive=True)
raise PayloadSetupError("failed to find valid iso image")
if path.endswith(".iso"):
path = os.path.dirname(path)
# this could already be set up the first time through
if not os.path.ismount(INSTALL_TREE):
# mount the ISO on a loop
image = os.path.normpath("%s/%s" % (path, image))
mountImage(image, INSTALL_TREE)
if not method.dir.endswith(".iso"):
method.dir = os.path.normpath("%s/%s" % (method.dir,
os.path.basename(image)))
while method.dir.startswith("/"):
# riduculous
method.dir = method.dir[1:]
# Check to see if the device is already mounted, in which case
# we don't need to mount it again
elif method.method == "cdrom" and \
blivet.util.get_mount_paths(device.path):
return
else:
device.format.setup(mountpoint=INSTALL_TREE)
def _setupMedia(self, device):
method = self.data.method
if method.method == "harddrive":
self._setupDevice(device, mountpoint=ISO_DIR)
# check for ISO images in the newly mounted dir
path = ISO_DIR
if method.dir:
path = os.path.normpath("%s/%s" % (path, method.dir))
# XXX it would be nice to streamline this when we're just setting
# things back up after storage activation instead of having to
# pretend we don't already know which ISO image we're going to
# use
image = findFirstIsoImage(path)
if not image:
device.teardown(recursive=True)
raise PayloadSetupError("failed to find valid iso image")
if path.endswith(".iso"):
path = os.path.dirname(path)
# this could already be set up the first time through
if not os.path.ismount(INSTALL_TREE):
# mount the ISO on a loop
image = os.path.normpath("%s/%s" % (path, image))
mountImage(image, INSTALL_TREE)
if not method.dir.endswith(".iso"):
method.dir = os.path.normpath(
"%s/%s" % (method.dir, os.path.basename(image)))
while method.dir.startswith("/"):
# riduculous
method.dir = method.dir[1:]
# Check to see if the device is already mounted, in which case
# we don't need to mount it again
elif method.method == "cdrom" and \
blivet.util.get_mount_paths(device.path):
return
else:
device.format.setup(mountpoint=INSTALL_TREE)
def _find_and_mount_iso(self, device, device_mount_dir, iso_path,
iso_mount_dir):
"""Find and mount installation source from ISO on device.
Return changed path to the iso to save looking for iso in the future call.
"""
self._setup_device(device, mountpoint=device_mount_dir)
# check for ISO images in the newly mounted dir
path = device_mount_dir
if iso_path:
path = os.path.normpath("%s/%s" % (path, iso_path))
# XXX it would be nice to streamline this when we're just setting
# things back up after storage activation instead of having to
# pretend we don't already know which ISO image we're going to
# use
image = findFirstIsoImage(path)
if not image:
device.teardown(recursive=True)
raise PayloadSetupError("failed to find valid iso image")
if path.endswith(".iso"):
path = os.path.dirname(path)
# this could already be set up the first time through
if not os.path.ismount(iso_mount_dir):
# mount the ISO on a loop
image = os.path.normpath("%s/%s" % (path, image))
mountImage(image, iso_mount_dir)
if not iso_path.endswith(".iso"):
result_path = os.path.normpath("%s/%s" %
(iso_path, os.path.basename(image)))
while result_path.startswith("/"):
# ridiculous
result_path = result_path[1:]
return result_path
return iso_path
def _find_and_mount_iso(self, device, device_mount_dir, iso_path, iso_mount_dir):
"""Find and mount installation source from ISO on device.
Return changed path to the iso to save looking for iso in the future call.
"""
self._setup_device(device, mountpoint=device_mount_dir)
# check for ISO images in the newly mounted dir
path = device_mount_dir
if iso_path:
path = os.path.normpath("%s/%s" % (path, iso_path))
# XXX it would be nice to streamline this when we're just setting
# things back up after storage activation instead of having to
# pretend we don't already know which ISO image we're going to
# use
image = findFirstIsoImage(path)
if not image:
device.teardown(recursive=True)
raise PayloadSetupError("failed to find valid iso image")
if path.endswith(".iso"):
path = os.path.dirname(path)
# this could already be set up the first time through
if not os.path.ismount(iso_mount_dir):
# mount the ISO on a loop
image = os.path.normpath("%s/%s" % (path, image))
mountImage(image, iso_mount_dir)
if not iso_path.endswith(".iso"):
result_path = os.path.normpath("%s/%s" % (iso_path,
os.path.basename(image)))
while result_path.startswith("/"):
# ridiculous
result_path = result_path[1:]
return result_path
return iso_path
def _setupInstallDevice(self, storage, checkmount):
# XXX FIXME: does this need to handle whatever was set up by dracut?
method = self.data.method
sslverify = True
url = None
mirrorlist = None
# See if we already have stuff mounted due to dracut
isodev = blivet.util.get_mount_device(DRACUT_ISODIR)
device = blivet.util.get_mount_device(DRACUT_REPODIR)
if method.method == "harddrive":
if method.biospart:
log.warning("biospart support is not implemented")
devspec = method.biospart
else:
devspec = method.partition
needmount = True
# See if we used this method for stage2, thus dracut left it
if isodev and method.partition and method.partition in isodev \
and DRACUT_ISODIR in device:
# Everything should be setup
url = "file://" + DRACUT_REPODIR
needmount = False
# We don't setup an install_device here
# because we can't tear it down
isodevice = storage.devicetree.resolveDevice(devspec)
if needmount:
if not isodevice:
raise PayloadSetupError(
"device for HDISO install %s does not exist" % devspec)
self._setupMedia(isodevice)
url = "file://" + INSTALL_TREE
self.install_device = isodevice
elif method.method == "nfs":
# There are several possible scenarios here:
# 1. dracut could have mounted both the nfs repo and an iso and used
# the stage2 from inside the iso to boot from.
# isodev and device will be set in this case.
# 2. dracut could have mounted the nfs repo and used a stage2 from
# the NFS mount w/o mounting the iso.
# isodev will be None and device will be the nfs: path
# 3. dracut did not mount the nfs (eg. stage2 came from elsewhere)
# isodev and device are both None
# 4. The repo may not contain an iso, in that case use it as is
if isodev:
path = iutil.parseNfsUrl('nfs:%s' % isodev)[2]
# See if the dir holding the iso is what we want
# and also if we have an iso mounted to /run/install/repo
if path and path in isodev and DRACUT_ISODIR in device:
# Everything should be setup
url = "file://" + DRACUT_REPODIR
else:
# see if the nfs dir is mounted
needmount = True
if device:
_options, host, path = iutil.parseNfsUrl('nfs:%s' % device)
if method.server and method.server == host and \
method.dir and method.dir == path:
needmount = False
path = DRACUT_REPODIR
if needmount:
# Mount the NFS share on INSTALL_TREE. If it ends up
# being nfsiso we will move the mountpoint to ISO_DIR.
if method.dir.endswith(".iso"):
nfsdir = os.path.dirname(method.dir)
else:
nfsdir = method.dir
self._setupNFS(INSTALL_TREE, method.server, nfsdir,
method.opts)
path = INSTALL_TREE
# check for ISO images in the newly mounted dir
if method.dir.endswith(".iso"):
# if the given URL includes a specific ISO image file, use it
image_file = os.path.basename(method.dir)
path = os.path.normpath("%s/%s" % (path, image_file))
image = findFirstIsoImage(path)
# An image was found, mount it on INSTALL_TREE
if image:
if path.startswith(INSTALL_TREE):
# move the INSTALL_TREE mount to ISO_DIR so we can
# mount the contents of the iso there.
# work around inability to move shared filesystems
iutil.execWithRedirect("mount",
["--make-rprivate", "/"])
iutil.execWithRedirect(
"mount", ["--move", INSTALL_TREE, ISO_DIR])
# The iso is now under ISO_DIR
path = ISO_DIR
elif path.endswith(".iso"):
path = os.path.dirname(path)
# mount the ISO on a loop
image = os.path.normpath("%s/%s" % (path, image))
mountImage(image, INSTALL_TREE)
url = "file://" + INSTALL_TREE
else:
# Fall back to the mount path instead of a mounted iso
url = "file://" + path
elif method.method == "url":
url = method.url
mirrorlist = method.mirrorlist
sslverify = not (method.noverifyssl or flags.noverifyssl)
elif method.method == "cdrom" or (checkmount and not method.method):
# Did dracut leave the DVD or NFS mounted for us?
device = blivet.util.get_mount_device(DRACUT_REPODIR)
# Check for valid optical media if we didn't boot from one
if not verifyMedia(DRACUT_REPODIR):
self.install_device = opticalInstallMedia(storage.devicetree)
# Only look at the dracut mount if we don't already have a cdrom
if device and not self.install_device:
self.install_device = storage.devicetree.getDeviceByPath(
device)
url = "file://" + DRACUT_REPODIR
if not method.method:
# See if this is a nfs mount
if ':' in device:
# prepend nfs: to the url as that's what the parser
# wants. Note we don't get options from this, but
# that's OK for the UI at least.
_options, host, path = iutil.parseNfsUrl("nfs:%s" %
device)
method.method = "nfs"
method.server = host
method.dir = path
else:
method.method = "cdrom"
else:
if self.install_device:
if not method.method:
method.method = "cdrom"
self._setupMedia(self.install_device)
url = "file://" + INSTALL_TREE
elif method.method == "cdrom":
raise PayloadSetupError("no usable optical media found")
return url, mirrorlist, sslverify
def _setupInstallDevice(self, storage, checkmount):
# XXX FIXME: does this need to handle whatever was set up by dracut?
method = self.data.method
sslverify = True
url = None
mirrorlist = None
# See if we already have stuff mounted due to dracut
isodev = blivet.util.get_mount_device(DRACUT_ISODIR)
device = blivet.util.get_mount_device(DRACUT_REPODIR)
if method.method == "harddrive":
if method.biospart:
log.warning("biospart support is not implemented")
devspec = method.biospart
else:
devspec = method.partition
needmount = True
# See if we used this method for stage2, thus dracut left it
if isodev and method.partition and method.partition in isodev \
and DRACUT_ISODIR in device:
# Everything should be setup
url = "file://" + DRACUT_REPODIR
needmount = False
# We don't setup an install_device here
# because we can't tear it down
isodevice = storage.devicetree.resolveDevice(devspec)
if needmount:
if not isodevice:
raise PayloadSetupError("device for HDISO install %s does not exist" % devspec)
self._setupMedia(isodevice)
url = "file://" + INSTALL_TREE
self.install_device = isodevice
elif method.method == "nfs":
# There are several possible scenarios here:
# 1. dracut could have mounted both the nfs repo and an iso and used
# the stage2 from inside the iso to boot from.
# isodev and device will be set in this case.
# 2. dracut could have mounted the nfs repo and used a stage2 from
# the NFS mount w/o mounting the iso.
# isodev will be None and device will be the nfs: path
# 3. dracut did not mount the nfs (eg. stage2 came from elsewhere)
# isodev and device are both None
# 4. The repo may not contain an iso, in that case use it as is
if isodev:
path = iutil.parseNfsUrl('nfs:%s' % isodev)[2]
# See if the dir holding the iso is what we want
# and also if we have an iso mounted to /run/install/repo
if path and path in isodev and DRACUT_ISODIR in device:
# Everything should be setup
url = "file://" + DRACUT_REPODIR
else:
# see if the nfs dir is mounted
needmount = True
if device:
_options, host, path = iutil.parseNfsUrl('nfs:%s' % device)
if method.server and method.server == host and \
method.dir and method.dir == path:
needmount = False
path = DRACUT_REPODIR
if needmount:
# Mount the NFS share on INSTALL_TREE. If it ends up
# being nfsiso we will move the mountpoint to ISO_DIR.
if method.dir.endswith(".iso"):
nfsdir = os.path.dirname(method.dir)
else:
nfsdir = method.dir
self._setupNFS(INSTALL_TREE, method.server, nfsdir,
method.opts)
path = INSTALL_TREE
# check for ISO images in the newly mounted dir
if method.dir.endswith(".iso"):
# if the given URL includes a specific ISO image file, use it
image_file = os.path.basename(method.dir)
path = os.path.normpath("%s/%s" % (path, image_file))
image = findFirstIsoImage(path)
# An image was found, mount it on INSTALL_TREE
if image:
if path.startswith(INSTALL_TREE):
# move the INSTALL_TREE mount to ISO_DIR so we can
# mount the contents of the iso there.
# work around inability to move shared filesystems
iutil.execWithRedirect("mount",
["--make-rprivate", "/"])
iutil.execWithRedirect("mount",
["--move", INSTALL_TREE, ISO_DIR])
# The iso is now under ISO_DIR
path = ISO_DIR
elif path.endswith(".iso"):
path = os.path.dirname(path)
# mount the ISO on a loop
image = os.path.normpath("%s/%s" % (path, image))
mountImage(image, INSTALL_TREE)
url = "file://" + INSTALL_TREE
else:
# Fall back to the mount path instead of a mounted iso
url = "file://" + path
elif method.method == "url":
url = method.url
mirrorlist = method.mirrorlist
sslverify = not (method.noverifyssl or flags.noverifyssl)
elif method.method == "cdrom" or (checkmount and not method.method):
# Did dracut leave the DVD or NFS mounted for us?
device = blivet.util.get_mount_device(DRACUT_REPODIR)
# Check for valid optical media if we didn't boot from one
if not verifyMedia(DRACUT_REPODIR):
self.install_device = opticalInstallMedia(storage.devicetree)
# Only look at the dracut mount if we don't already have a cdrom
if device and not self.install_device:
self.install_device = storage.devicetree.getDeviceByPath(device)
url = "file://" + DRACUT_REPODIR
if not method.method:
# See if this is a nfs mount
if ':' in device:
# prepend nfs: to the url as that's what the parser
# wants. Note we don't get options from this, but
# that's OK for the UI at least.
_options, host, path = iutil.parseNfsUrl("nfs:%s" % device)
method.method = "nfs"
method.server = host
method.dir = path
else:
method.method = "cdrom"
else:
if self.install_device:
if not method.method:
method.method = "cdrom"
self._setupMedia(self.install_device)
url = "file://" + INSTALL_TREE
elif method.method == "cdrom":
raise PayloadSetupError("no usable optical media found")
return url, mirrorlist, sslverify
def _setup_nfs_device(self, storage, method, isodev, device):
# There are several possible scenarios here:
# 1. dracut could have mounted both the nfs repo and an iso and used
# the stage2 from inside the iso to boot from.
# isodev and device will be set in this case.
# 2. dracut could have mounted the nfs repo and used a stage2 from
# the NFS mount w/o mounting the iso.
# isodev will be None and device will be the nfs: path
# 3. dracut did not mount the nfs (eg. stage2 came from elsewhere)
# isodev and/or device are None
# 4. The repo may not contain an iso, in that case use it as is
url = None
path = None
if isodev and device:
path = util.parseNfsUrl('nfs:%s' % isodev)[2]
# See if the dir holding the iso is what we want
# and also if we have an iso mounted to /run/install/repo
if path and path in isodev and DRACUT_ISODIR in device:
# Everything should be setup
url = "file://" + DRACUT_REPODIR
else:
# see if the nfs dir is mounted
need_mount = True
if device:
_options, host, path = util.parseNfsUrl('nfs:%s' % device)
if method.server and method.server == host and \
method.dir and method.dir == path:
need_mount = False
path = DRACUT_REPODIR
elif isodev:
# isodev with no device can happen when options on an existing
# nfs mount have changed. It is already mounted, but on INSTALL_TREE
# which is the same as DRACUT_ISODIR, making it hard for _setup_NFS
# to detect that it is already mounted.
_options, host, path = util.parseNfsUrl('nfs:%s' % isodev)
if path and path in isodev:
need_mount = False
path = DRACUT_ISODIR
if need_mount:
# Mount the NFS share on INSTALL_TREE. If it ends up
# being nfsiso we will move the mountpoint to ISO_DIR.
if method.dir.endswith(".iso"):
nfs_dir = os.path.dirname(method.dir)
else:
nfs_dir = method.dir
self._setup_NFS(INSTALL_TREE, method.server, nfs_dir,
method.opts)
path = INSTALL_TREE
# check for ISO images in the newly mounted dir
if method.dir.endswith(".iso"):
# if the given URL includes a specific ISO image file, use it
image_file = os.path.basename(method.dir)
path = os.path.normpath("%s/%s" % (path, image_file))
image = findFirstIsoImage(path)
# An image was found, mount it on INSTALL_TREE
if image:
if path.startswith(INSTALL_TREE):
# move the INSTALL_TREE mount to ISO_DIR so we can
# mount the contents of the iso there.
# work around inability to move shared filesystems
util.execWithRedirect("mount", ["--make-rprivate", "/"])
util.execWithRedirect("mount",
["--move", INSTALL_TREE, ISO_DIR])
# The iso is now under ISO_DIR
path = ISO_DIR
elif path.endswith(".iso"):
path = os.path.dirname(path)
# mount the ISO on a loop
image = os.path.normpath("%s/%s" % (path, image))
mountImage(image, INSTALL_TREE)
url = "file://" + INSTALL_TREE
else:
# Fall back to the mount path instead of a mounted iso
url = "file://" + path
return url
def _setup_nfs_device(self, storage, method, isodev, device):
# There are several possible scenarios here:
# 1. dracut could have mounted both the nfs repo and an iso and used
# the stage2 from inside the iso to boot from.
# isodev and device will be set in this case.
# 2. dracut could have mounted the nfs repo and used a stage2 from
# the NFS mount w/o mounting the iso.
# isodev will be None and device will be the nfs: path
# 3. dracut did not mount the nfs (eg. stage2 came from elsewhere)
# isodev and/or device are None
# 4. The repo may not contain an iso, in that case use it as is
url = None
path = None
if isodev and device:
path = util.parseNfsUrl('nfs:%s' % isodev)[2]
# See if the dir holding the iso is what we want
# and also if we have an iso mounted to /run/install/repo
if path and path in isodev and DRACUT_ISODIR in device:
# Everything should be setup
url = "file://" + DRACUT_REPODIR
else:
# see if the nfs dir is mounted
need_mount = True
if device:
_options, host, path = util.parseNfsUrl('nfs:%s' % device)
if method.server and method.server == host and \
method.dir and method.dir == path:
need_mount = False
path = DRACUT_REPODIR
elif isodev:
# isodev with no device can happen when options on an existing
# nfs mount have changed. It is already mounted, but on INSTALL_TREE
# which is the same as DRACUT_ISODIR, making it hard for _setup_NFS
# to detect that it is already mounted.
_options, host, path = util.parseNfsUrl('nfs:%s' % isodev)
if path and path in isodev:
need_mount = False
path = DRACUT_ISODIR
if need_mount:
# Mount the NFS share on INSTALL_TREE. If it ends up
# being nfsiso we will move the mountpoint to ISO_DIR.
if method.dir.endswith(".iso"):
nfs_dir = os.path.dirname(method.dir)
else:
nfs_dir = method.dir
self._setup_NFS(INSTALL_TREE, method.server, nfs_dir, method.opts)
path = INSTALL_TREE
# check for ISO images in the newly mounted dir
if method.dir.endswith(".iso"):
# if the given URL includes a specific ISO image file, use it
image_file = os.path.basename(method.dir)
path = os.path.normpath("%s/%s" % (path, image_file))
image = findFirstIsoImage(path)
# An image was found, mount it on INSTALL_TREE
if image:
if path.startswith(INSTALL_TREE):
# move the INSTALL_TREE mount to ISO_DIR so we can
# mount the contents of the iso there.
# work around inability to move shared filesystems
util.execWithRedirect("mount",
["--make-rprivate", "/"])
util.execWithRedirect("mount",
["--move", INSTALL_TREE, ISO_DIR])
# The iso is now under ISO_DIR
path = ISO_DIR
elif path.endswith(".iso"):
path = os.path.dirname(path)
# mount the ISO on a loop
image = os.path.normpath("%s/%s" % (path, image))
mountImage(image, INSTALL_TREE)
url = "file://" + INSTALL_TREE
elif os.path.isdir(path):
# Fall back to the mount path instead of a mounted iso
url = "file://" + path
else:
# Do not try to use iso as source if it is not valid source
raise PayloadSetupError("Not a valid ISO image!")
return url
