def clean_polygon(self, polygon):
"""清多边形
Args:
polygon ([type]): [description]
Returns:
[type]: [description]
"""
simple = pyclipper.SimplifyPolygon(polygon, pyclipper.PFT_NONZERO)
if simple is None or len(simple) == 0:
return None
biggest = simple[0]
biggest_area = pyclipper.Area(biggest)
for i in range(1, len(simple)):
area = abs(pyclipper.Area(simple[i]))
if area > biggest_area:
biggest = simple[i]
biggest_area = area
clean = pyclipper.CleanPolygon(biggest, self.config['curveTolerance'])
if clean is None or len(clean) == 0:
return None
return clean
def clean_polygon(self, polygon):
simple = pyclipper.SimplifyPolygon(polygon, pyclipper.PFT_NONZERO)
if simple is None or len(simple) == 0:
return None
biggest = simple[0]
biggest_area = pyclipper.Area(
biggest) # 给出端点，求多边形面积，端点顺序一定要是逆时针的，否则结果为负
for i in range(1, len(simple)):
area = abs(pyclipper.Area(simple[i]))
if area > biggest_area:
biggest = simple[i]
biggest_area = area
clean = pyclipper.CleanPolygon(biggest, self.config['curveTolerance'])
if clean is None or len(clean) == 0:
return None
return clean
def test_clean_polygon(self):
solution = pyclipper.CleanPolygon(PATH_CLIP_1)
self.assertEqual(len(solution), len(PATH_CLIP_1))
def place_paths(self):
# 排列图形
if self.bin_polygon is None:
return None
# rotate paths by given rotation
rotated = list()
for i in range(0, len(self.paths)):
r = rotate_polygon(self.paths[i][1]['points'], self.paths[i][2])
r['rotation'] = self.paths[i][2]
r['source'] = self.paths[i][1]['p_id']
r['p_id'] = self.paths[i][0]
rotated.append(r)
paths = rotated
# 保存所有转移数据
all_placements = list()
# 基因组的适应值
fitness = 0
bin_area = abs(polygon_area(self.bin_polygon['points']))
min_width = None
while len(paths) > 0:
placed = list()
placements = list()
# add 1 for each new bin opened (lower fitness is better)
fitness += 1
for i in range(0, len(paths)):
path = paths[i]
# 图形的坐标
key = json.dumps({
'A': '-1',
'B': path['p_id'],
'inside': True,
'A_rotation': 0,
'B_rotation': path['rotation']
})
binNfp = self.nfpCache.get(key)
if binNfp is None or len(binNfp) == 0:
continue
# part unplaceable, skip
error = False
# ensure all necessary NFPs exist
for p in placed:
key = json.dumps({
'A': p['p_id'],
'B': path['p_id'],
'inside': False,
'A_rotation': p['rotation'],
'B_rotation': path['rotation']
})
nfp = self.nfpCache.get(key)
if nfp is None:
error = True
break
# part unplaceable, skip
if error:
continue
position = None
if len(placed) == 0:
for j in range(0, len(binNfp)):
for k in range(0, len(binNfp[j])):
if position is None or (
binNfp[j][k]['x'] - path['points'][0]['x']
< position['x']):
position = {
'x':
binNfp[j][k]['x'] - path['points'][0]['x'],
'y':
binNfp[j][k]['y'] - path['points'][0]['y'],
'p_id': path['p_id'],
'rotation': path['rotation']
}
placements.append(position)
placed.append(path)
continue
clipper_bin_nfp = list()
for j in range(0, len(binNfp)):
clipper_bin_nfp.append([[p['x'], p['y']]
for p in binNfp[j]])
clipper = pyclipper.Pyclipper()
for j in range(0, len(placed)):
p = placed[j]
key = json.dumps({
'A': p['p_id'],
'B': path['p_id'],
'inside': False,
'A_rotation': p['rotation'],
'B_rotation': path['rotation']
})
nfp = self.nfpCache.get(key)
if nfp is None:
continue
for k in range(0, len(nfp)):
clone = [[
np['x'] + placements[j]['x'],
np['y'] + placements[j]['y']
] for np in nfp[k]]
clone = pyclipper.CleanPolygon(clone)
if len(clone) > 2:
clipper.AddPath(clone, pyclipper.PT_SUBJECT, True)
combine_nfp = clipper.Execute(pyclipper.CT_UNION,
pyclipper.PFT_NONZERO,
pyclipper.PFT_NONZERO)
if len(combine_nfp) == 0:
continue
clipper = pyclipper.Pyclipper()
clipper.AddPaths(combine_nfp, pyclipper.PT_CLIP, True)
try:
clipper.AddPaths(clipper_bin_nfp, pyclipper.PT_SUBJECT,
True)
except:
print u'图形坐标出错', clipper_bin_nfp
# choose placement that results in the smallest bounding box
finalNfp = clipper.Execute(pyclipper.CT_DIFFERENCE,
pyclipper.PFT_NONZERO,
pyclipper.PFT_NONZERO)
if len(finalNfp) == 0:
continue
finalNfp = pyclipper.CleanPolygons(finalNfp)
for j in range(len(finalNfp) - 1, -1, -1):
if len(finalNfp[j]) < 3:
finalNfp.pop(j)
if len(finalNfp) == 0:
continue
finalNfp = [[{
'x': p[0],
'y': p[1]
} for p in polygon] for polygon in finalNfp]
min_width = None
min_area = None
min_x = None
for nf in finalNfp:
if abs(polygon_area(nf)) < 2:
continue
for p_nf in nf:
# 生成nfp多边形
all_points = list()
for m in range(0, len(placed)):
for p in placed[m]['points']:
all_points.append({
'x':
p['x'] + placements[m]['x'],
'y':
p['y'] + placements[m]['y']
})
# path 坐标
shift_vector = {
'x': p_nf['x'] - path['points'][0]['x'],
'y': p_nf['y'] - path['points'][0]['y'],
'p_id': path['p_id'],
'rotation': path['rotation'],
}
# 找新坐标后的最小矩形
for m in range(0, len(path['points'])):
all_points.append({
'x':
path['points'][m]['x'] + shift_vector['x'],
'y':
path['points'][m]['y'] + shift_vector['y']
})
rect_bounds = get_polygon_bounds(all_points)
# weigh width more, to help compress in direction of gravity
area = rect_bounds['width'] * 2 + rect_bounds['height']
if (min_area is None or area < min_area
or almost_equal(min_area, area)) and (
min_x is None
or shift_vector['x'] <= min_x):
min_area = area
min_width = rect_bounds['width']
position = shift_vector
min_x = shift_vector['x']
if position:
placed.append(path)
placements.append(position)
if min_width:
fitness += min_width / bin_area
for p in placed:
p_id = paths.index(p)
if p_id >= 0:
paths.pop(p_id)
if placements and len(placements) > 0:
all_placements.append(placements)
else:
# something went wrong
break
fitness += 2 * len(paths)
return {
'placements': all_placements,
'fitness': fitness,
'paths': paths,
'area': bin_area
}
def place_paths(self, solution, nfp_cache):
"""
:param solution:
:param nfp_cache:
:return:
"""
self.solution = solution
paths = list()
for combined_segment in solution:
order = combined_segment[0]
polygon = combined_segment[1]['points']
angle = combined_segment[2]
r = rotate_polygon(polygon, angle)
r['rotation'] = angle
r['order'] = order
paths.append(r)
a = list()
for i in paths:
a.append(i['rotation'])
print("angle = ", a)
fitness = 0
min_length = None
placed_segment_list = list() # 存放已经放置了的零件
movements_list = list()
for segment in paths:
key = json.dumps({
'A': '-1',
'B': segment['order'],
'inside': True,
'A_rotation': 0,
'B_rotation': segment['rotation']
})
inner_fit_rectangle = nfp_cache.get(key)
# position = None
movement = None
####################################################################################
# if len(placed_segment_list) == 0: # 最开始，没有放零件
# for point in inner_fit_rectangle:
# if movement is None or (point['x'] - segment['points'][0]['x'] < movement['x']):
# # 零件做下角的坐标加上这个position 就是ifp左下角的坐标
# movement = {
# 'x': point['x'] - segment['points'][0]['x'],
# 'y': point['y'] - segment['points'][0]['y'],
# 'p_id': segment['order'],
# 'rotation': segment['rotation']
# }
#
# movements_list.append(movement)
# placed_segment_list.append(segment)
#
# continue
####################################################################################
####################################################################################
if len(placed_segment_list) < 2:
for point in inner_fit_rectangle:
if movement is None or (
point['x'] - segment['points'][0]['x'] <
movement['x']):
# 零件做下角的坐标加上这个position 就是ifp左下角的坐标
movement = {
'x': 0,
'y': 0,
'p_id': segment['order'],
'rotation': segment['rotation']
}
movements_list.append(movement)
placed_segment_list.append(segment)
continue
####################################################################################
clipper_bin_nfp = list()
clipper_bin_nfp.append([[p['x'], p['y']]
for p in inner_fit_rectangle])
clipper = pyclipper.Pyclipper()
j = 0
for placed_segment in placed_segment_list:
"""
求待放的零件与已放了的零件的nfp
"""
key = json.dumps({
'A': placed_segment['order'],
'B': segment['order'],
'inside': False,
'A_rotation': placed_segment['rotation'],
'B_rotation': segment['rotation']
})
nfp = nfp_cache.get(key)
moved_nfp_bl = [[
point['x'] + movements_list[j]['x'],
point['y'] + movements_list[j]['y']
] for point in nfp]
moved_nfp_bl = pyclipper.CleanPolygon(moved_nfp_bl)
j = j + 1
if len(moved_nfp_bl) > 2:
clipper.AddPath(moved_nfp_bl, pyclipper.PT_SUBJECT, True)
combine_nfp = clipper.Execute(pyclipper.CT_UNION,
pyclipper.PFT_NONZERO,
pyclipper.PFT_NONZERO)
clipper = pyclipper.Pyclipper()
clipper.AddPaths(combine_nfp, pyclipper.PT_CLIP, True)
clipper.AddPaths(clipper_bin_nfp, pyclipper.PT_SUBJECT, True)
final_nfp = clipper.Execute(pyclipper.CT_DIFFERENCE,
pyclipper.PFT_NONZERO,
pyclipper.PFT_NONZERO)
final_nfp = pyclipper.CleanPolygons(final_nfp)
for j in range(len(final_nfp) - 1, -1, -1):
if len(final_nfp[j]) < 3:
final_nfp.pop(j)
if len(final_nfp) == 0:
continue
candidate_bl_position = list()
# a = list()
for polygon in final_nfp:
for p in polygon:
# 将所有可能放置的点都存放在一个list里面，这些点就是candidate position
candidate_bl_position.append({'x': p[0], 'y': p[1]})
# a.append({'x': p[0], 'y': p[1]})
min_length = None
min_area = None
min_x = None
for p_nf in candidate_bl_position:
all_points = list()
for m in range(0, len(placed_segment_list)):
for p in placed_segment_list[m]['points']:
all_points.append({
'x': p['x'] + movements_list[m]['x'],
'y': p['y'] + movements_list[m]['y']
})
# path 坐标
shift_vector = {
'x': p_nf['x'] - segment['points'][0]['x'],
'y': p_nf['y'] - segment['points'][0]['y'],
'p_id': segment['order'],
'rotation': segment['rotation'],
}
# 找新坐标后的最小矩形
for point in segment['points']:
all_points.append({
'x': point['x'] + shift_vector['x'],
'y': point['y'] + shift_vector['y']
})
rect_bounds = get_polygon_bounds(all_points)
# weigh width more, to help compress in direction of gravity
area = rect_bounds['length'] * 2 + rect_bounds['width']
if (min_area is None or area < min_area or almost_equal(
min_area, area)) and (min_x is None
or shift_vector['x'] <= min_x):
min_area = area
min_length = rect_bounds['length']
movement = shift_vector
min_x = shift_vector['x']
if movement:
placed_segment_list.append(segment)
movements_list.append(movement)
# placements.append(position)
if min_length:
fitness = self.total_segments_area / (min_length * BIN_WIDTH)
print("fitness = ", fitness)
print("min_length = ", min_length)
return {
'placements': movements_list,
'fitness': fitness,
'paths': paths,
'min_length': min_length,
'solution': self.solution
}
def place_paths(self):
# 排列图形
if self.bin_polygon is None:
return None
# rotate paths by given rotation
rotated = list()
for i in range(0, len(self.paths)):
r = rotate_polygon(self.paths[i][1]['points'], self.paths[i][2])
r['rotation'] = self.paths[i][2]
r['source'] = self.paths[i][1]['p_id']
r['p_id'] = self.paths[i][0]
rotated.append(r)
paths = rotated
# 保存所有布局后的布局数据
all_placements = list()
# 基因组的适应值
fitness = 0
bin_area = abs(polygon_area(self.bin_polygon['points']))
min_width = None
while len(paths) > 0: #当还有形状没安排上
placed = list()
placements = list()
# add 1 for each new bin opened (lower fitness is better)
fitness += 1
for i in range(0, len(paths)): #对于每个剩余形状
path = paths[i] #当前剩余图形
# 图形的坐标
key = json.dumps({
'A': '-1',
'B': path['p_id'], #当前剩余图形的id
'inside': True,
'A_rotation': 0,
'B_rotation': path['rotation']
})
binNfp = self.nfpCache.get(
key) #{"pair['key']":nfp}#取出当前图形和容器的内切多边形列表
if binNfp is None or len(binNfp) == 0:
print("error:binNfp缺失:" + key)
continue #没有就忽略当前图形不放了
# 无法放下,跳过
error = False
# 确保所有必要的 NFPs 存在
for p in placed: #对于每个已经放下的图形
key = json.dumps({
'A': p['p_id'],
'B': path['p_id'],
'inside': False,
'A_rotation': p['rotation'],
'B_rotation': path['rotation']
})
nfp = self.nfpCache.get(key) #每个已经放下的图形和当前图形的外切多边形列表
if nfp is None:
error = True
print("error:图形之间的nfp缺失:" + key)
break #没有就结束,没法搞
# 无法放下,跳过
if error:
print("error:无法放下")
continue
position = None
if len(placed) == 0: #如果一个图形都还没放进去
for j in range(0, len(binNfp)): #对于每个当前图形和容器外接多边形
for k in range(0, len(binNfp[j])): #对于每个nfp的坐标
if position is None or (
binNfp[j][k]['x'] - path['points'][0]['x']
< position['x']):
position = {
'x': binNfp[j][k]['x'] - path['points'][0]
['x'], #NFP中最小x与图形参考点x的距离,将图形平移到那一点要将每个x减去这个距离
'y': binNfp[j][k]['y'] -
path['points'][0]['y'], #y要减去这个距离
'p_id': path['p_id'],
'rotation': path['rotation']
}
placements.append(position) #存储着第一个图像应该做什么移动到目标布局
placed.append(path) #第一个图像摆完
continue #结束这个循环,放置下一个图形
clipper_bin_nfp = list()
for j in range(0, len(binNfp)): #对于每一个与Bin的NFP
clipper_bin_nfp.append([[p['x'], p['y']] for p in binNfp[j]
]) #将NFP的每个坐标都压入clipper_bin_nfp
clipper = pyclipper.Pyclipper()
for j in range(0, len(placed)): #对于每一个放好的图形
p = placed[j]
key = json.dumps({
'A': p['p_id'],
'B': path['p_id'],
'inside': False,
'A_rotation': p['rotation'],
'B_rotation': path['rotation']
})
nfp = self.nfpCache.get(key) #得到当前要摆放的图形和观察放好的图形之间的nfp
if nfp is None:
print("error:nfp缺失:" + key)
continue
for k in range(0, len(nfp)): #对于每一个nfp
clone = [[
np['x'] + placements[j]['x'],
np['y'] + placements[j]['y']
] for np in nfp[k]] #每个nfp移动到已放好块的周围
clone = pyclipper.CleanPolygon(
clone) #移除以下类型的点集 距离过近的相邻点 等等
if len(clone) > 2:
clipper.AddPath(clone, pyclipper.PT_SUBJECT,
True) #NFP交给clipper
#所有放置好的图形的NFP并集
combine_nfp = clipper.Execute(pyclipper.CT_UNION,
pyclipper.PFT_NONZERO,
pyclipper.PFT_NONZERO)
if len(combine_nfp) == 0:
print("error:nfp错误:nfp并集长度为0")
continue
clipper = pyclipper.Pyclipper()
clipper.AddPaths(combine_nfp, pyclipper.PT_CLIP,
True) #将合并好的NFP交给clipper
try:
clipper.AddPaths(clipper_bin_nfp, pyclipper.PT_SUBJECT,
True) #将要放置的图形与盒子的NFP交给clipper
except:
print(u'图形坐标出错', clipper_bin_nfp)
# choose placement that results in the smallest bounding box
#与盒子NFP(可行)-放好图形的NFP(不可行)
finalNfp = clipper.Execute(pyclipper.CT_DIFFERENCE,
pyclipper.PFT_NONZERO,
pyclipper.PFT_NONZERO)
if len(finalNfp) == 0:
continue
finalNfp = pyclipper.CleanPolygons(finalNfp)
for j in range(len(finalNfp) - 1, -1, -1):
if len(finalNfp[j]) < 3:
finalNfp.pop(j)
if len(finalNfp) == 0:
continue
finalNfp = [[{
'x': p[0],
'y': p[1]
} for p in polygon] for polygon in finalNfp] #将所有finalNFP的点取出
min_width = None
min_area = None
min_x = None
for nf in finalNfp: #对于每个NFP
if abs(polygon_area(nf)) < 2:
continue
for p_nf in nf: #对于每个NFP的点
# 生成nfp多边形
all_points = list()
for m in range(0, len(placed)): #对于每个已放置图形
for p in placed[m]['points']: #对于每个点
all_points.append({
'x':
p['x'] + placements[m]['x'], #每个点都移动到布局
'y':
p['y'] + placements[m]['y']
})
# path 坐标
shift_vector = {
'x': p_nf['x'] - path['points'][0]['x'],
'y': p_nf['y'] - path['points'][0]['y'],
'p_id': path['p_id'],
'rotation': path['rotation'],
}
# 找新坐标后的最小矩形
for m in range(0, len(path['points'])):
all_points.append({
'x':
path['points'][m]['x'] + shift_vector['x'],
'y':
path['points'][m]['y'] + shift_vector['y']
})
rect_bounds = get_polygon_bounds(all_points)
# weigh width more, to help compress in direction of gravity
area = rect_bounds['width'] * 2 + rect_bounds['height']
if (min_area is None or area < min_area
or almost_equal(min_area, area)) and (
min_x is None
or shift_vector['x'] <= min_x):
min_area = area
min_width = rect_bounds['width']
position = shift_vector
min_x = shift_vector['x']
if position:
placed.append(path)
placements.append(position)
if min_width:
fitness += FITNESSSCALE * min_width / bin_area
for p in placed: #将安排上的形状从剩余形状中剔除
p_id = paths.index(p)
if p_id >= 0:
paths.pop(p_id)
if placements and len(placements) > 0:
all_placements.append(placements)
else:
# something wrong
break
fitness += 2 * len(paths)
return {
'placements': all_placements,
'fitness': fitness,
'min_width': min_width,
'paths': paths,
'area': bin_area
}
