def fabric_info_get_routing_table(self, filename, tftp_addr=None):
"""Upload a routing_table file from the node to TFTP"""
if not (tftp_addr):
raise IpmiError('No tftp address!')
routing_table = []
routing_table.append('Node 1: rt - 0.2.0.3.2')
routing_table.append('Node 2: rt - 0.3.0.1.2')
routing_table.append('Node 3: rt - 0.2.0.1.3')
routing_table.append('Node 12: rt - 0.2.0.0.1')
routing_table.append('Node 13: rt - 0.2.0.0.1')
routing_table.append('Node 14: rt - 0.2.0.0.1')
routing_table.append('Node 15: rt - 0.2.0.0.1')
work_dir = tempfile.mkdtemp(prefix="cxmanage_test-")
with open('%s/%s' % (work_dir, filename), 'w') as rt_file:
for rtable in routing_table:
rt_file.write(rtable + '\n')
rt_file.close()
# Upload to tftp
address, port = tftp_addr.split(":")
port = int(port)
tftp = ExternalTftp(address, port)
tftp.put_file("%s/%s" % (work_dir, filename), filename)
shutil.rmtree(work_dir)
def fabric_config_get_uplink_info(self, filename, tftp_addr=None):
""" Mock fabric_config_get_uplink_info method """
if not (tftp_addr):
raise IpmiError('No tftp address!')
work_dir = tempfile.mkdtemp(prefix="cxmanage_test-")
# Create uplink info file
ulinfo = open("%s/%s" % (work_dir, filename), "w")
for i in range(1, len(self.ip_addresses)):
ulinfo.write("Node %i: eth0 0, eth1 0, mgmt 0\n" % i)
ulinfo.close()
# Upload to tftp
address, port = tftp_addr.split(":")
port = int(port)
tftp = ExternalTftp(address, port)
tftp.put_file("%s/%s" % (work_dir, filename), filename)
shutil.rmtree(work_dir)
def fabric_get_linkstats(self, filename, tftp_addr=None, link=None):
"""Upload a link_stats file from the node to TFTP"""
if not (tftp_addr):
raise IpmiError('No tftp address!')
link_stats = []
link_stats.append('Packet Counts for Link %s:' % link)
link_stats.append('Link0 StatspFS_LCn_CFG_0(link) = 0x1030d07f')
link_stats.append('pFS_LCn_CFG_1 = 0x105f')
link_stats.append('pFS_LCn_STATE = 0x1033')
link_stats.append('pFS_LCn_SC_STAT = 0x0')
link_stats.append('pFS_LCn_PKT_CNT_0 = 0x0')
link_stats.append('pFS_LCn_PKT_CNT_1 = 0x0')
link_stats.append('pFS_LCn_BYTE_CNT_0 = 0x0')
link_stats.append('pFS_LCn_BYTE_CNT_1 = 0x0')
link_stats.append('pFS_LCn_CM_TXDATA_0 = 0x82000000')
link_stats.append('pFS_LCn_CM_TXDATA_1 = 0x0')
link_stats.append('pFS_LCn_CM_RXDATA_0 = 0x0')
link_stats.append('pFS_LCn_CM_RXDATA_1 = 0x0')
link_stats.append('pFS_LCn_PKT_CNT_0 = 0x0')
link_stats.append('pFS_LCn_PKT_CNT_1 = 0x0')
link_stats.append('pFS_LCn_RMCSCNT = 0x1428')
link_stats.append('pFS_LCn_RUCSCNT = 0x116')
link_stats.append('pFS_LCn_RERRSCNT = 0x0')
link_stats.append('pFS_LCn_RDRPSCNT = 0xb4')
link_stats.append('pFS_LCn_RPKTSCNT = 0x0')
link_stats.append('pFS_LCn_TPKTSCNT = 0x1')
link_stats.append('pFS_LCn_TDRPSCNT = 0x0')
work_dir = tempfile.mkdtemp(prefix="cxmanage_test-")
with open('%s/%s' % (work_dir, filename), 'w') as ls_file:
for stat in link_stats:
ls_file.write(stat + '\n')
ls_file.close()
# Upload to tftp
address, port = tftp_addr.split(":")
port = int(port)
tftp = ExternalTftp(address, port)
tftp.put_file("%s/%s" % (work_dir, filename), filename)
shutil.rmtree(work_dir)
def fabric_config_get_ip_info(self, filename, tftp_addr=None):
""" Upload an ipinfo file from the node to TFTP"""
if not (tftp_addr):
raise IpmiError('No tftp address!')
work_dir = tempfile.mkdtemp(prefix="cxmanage_test-")
# Create IP info file
ipinfo = open("%s/%s" % (work_dir, filename), "w")
for i in range(len(self.ip_addresses)):
ipinfo.write("Node %i: %s\n" % (i, self.ip_addresses[i]))
ipinfo.close()
# Upload to tftp
address, port = tftp_addr.split(":")
port = int(port)
tftp = ExternalTftp(address, port)
tftp.put_file("%s/%s" % (work_dir, filename), filename)
shutil.rmtree(work_dir)
def fabric_config_get_mac_addresses(self, filename, tftp_addr=None):
""" Upload a macaddrs file from the node to TFTP"""
if not (tftp_addr):
raise IpmiError('No tftp address!')
work_dir = tempfile.mkdtemp(prefix="cxmanage_test-")
# Create macaddrs file
macaddrs = open("%s/%s" % (work_dir, filename), "w")
for i in range(len(self.ip_addresses)):
for port in range(3):
macaddr = "00:00:00:00:%x:%x" % (i, port)
macaddrs.write("Node %i, Port %i: %s\n" % (i, port, macaddr))
macaddrs.close()
# Upload to tftp
address, port = tftp_addr.split(":")
port = int(port)
tftp = ExternalTftp(address, port)
tftp.put_file("%s/%s" % (work_dir, filename), filename)
shutil.rmtree(work_dir)
def fabric_info_get_link_map(self, filename, tftp_addr=None):
"""Upload a link_map file from the node to TFTP"""
if not (tftp_addr):
raise IpmiError('No tftp address!')
link_map = []
link_map.append('Link 1: Node 2')
link_map.append('Link 3: Node 1')
link_map.append('Link 4: Node 3')
work_dir = tempfile.mkdtemp(prefix="cxmanage_test-")
with open('%s/%s' % (work_dir, filename), 'w') as lm_file:
for lmap in link_map:
lm_file.write(lmap + '\n')
lm_file.close()
# Upload to tftp
address, port = tftp_addr.split(":")
port = int(port)
tftp = ExternalTftp(address, port)
tftp.put_file("%s/%s" % (work_dir, filename), filename)
shutil.rmtree(work_dir)
def fabric_info_get_depth_chart(self, filename, tftp_addr=None):
"""Upload a depth_chart file from the node to TFTP"""
if not (tftp_addr):
raise IpmiError('No tftp address!')
depth_chart = []
depth_chart.append(
'Node 1: Shortest Distance 0 hops via neighbor 0: ' +
'other hops/neighbors -')
depth_chart.append(
'Node 2: Shortest Distance 0 hops via neighbor 0: ' +
'other hops/neighbors - 1/3')
depth_chart.append(
'Node 3: Shortest Distance 0 hops via neighbor 0: ' +
'other hops/neighbors - 1/2')
depth_chart.append(
'Node 4: Shortest Distance 2 hops via neighbor 6: ' +
'other hops/neighbors - 3/7')
depth_chart.append(
'Node 5: Shortest Distance 3 hops via neighbor 4: ' +
'other hops/neighbors -')
depth_chart.append(
'Node 6: Shortest Distance 1 hops via neighbor 2: ' +
'other hops/neighbors -')
depth_chart.append(
'Node 7: Shortest Distance 2 hops via neighbor 6: ' +
'other hops/neighbors - 3/4')
depth_chart.append(
'Node 8: Shortest Distance 3 hops via neighbor 10: ' +
'other hops/neighbors - 4/11')
depth_chart.append(
'Node 9: Shortest Distance 4 hops via neighbor 8: ' +
'other hops/neighbors -')
depth_chart.append(
'Node 10: Shortest Distance 2 hops via neighbor 6: ' +
'other hops/neighbors -')
depth_chart.append(
'Node 11: Shortest Distance 3 hops via neighbor 10: ' +
'other hops/neighbors - 4/8')
depth_chart.append(
'Node 12: Shortest Distance 4 hops via neighbor 14: ' +
'other hops/neighbors - 5/15')
depth_chart.append(
'Node 13: Shortest Distance 5 hops via neighbor 12: ' +
'other hops/neighbors -')
depth_chart.append(
'Node 14: Shortest Distance 3 hops via neighbor 10: ' +
'other hops/neighbors -')
depth_chart.append(
'Node 15: Shortest Distance 4 hops via neighbor 14: ' +
'other hops/neighbors - 5/12')
work_dir = tempfile.mkdtemp(prefix="cxmanage_test-")
with open('%s/%s' % (work_dir, filename), 'w') as dc_file:
for dchart in depth_chart:
dc_file.write(dchart + '\n')
dc_file.close()
# Upload to tftp
address, port = tftp_addr.split(":")
port = int(port)
tftp = ExternalTftp(address, port)
tftp.put_file("%s/%s" % (work_dir, filename), filename)
shutil.rmtree(work_dir)
def register_firmware_write(self, filename, partition, image_type):
""" Mock register_firmware_write method. currently not supported """
raise IpmiError()