def __init__(self,
radius=50.,
thickness=10,
curvature_s1=1. / 200,
curvature_s2=1. / 200,
*args,
**kwargs):
Component.__init__(self, *args, **kwargs)
self.radius = radius
self.thickness = thickness
self.curvature_s1 = curvature_s1
self.curvature_s2 = curvature_s2
if self.curvature_s1 != 0.:
__a_surf = Spherical(shape=Circular(radius=self.radius),
curvature=self.curvature_s1)
else:
__a_surf = Plane(shape=Circular(radius=self.radius))
if self.curvature_s2 != 0:
__p_surf = Spherical(shape=Circular(radius=self.radius),
curvature=self.curvature_s2)
else:
__p_surf = Plane(shape=Circular(radius=self.radius))
self.surflist["S1"] = (__a_surf, (0, 0, -self.thickness / 2), (0, 0,
0))
self.surflist["S2"] = (__p_surf, (0, 0, self.thickness / 2), (0, 0, 0))
if self.curvature_s1 != 0:
r_a = 1. / self.curvature_s1
s_a = absolute(r_a) - sqrt(r_a * r_a - self.radius * self.radius)
if (r_a) < 0: s_a = -s_a
else:
s_a = 0.
if self.curvature_s2 != 0:
r_p = 1. / self.curvature_s2
s_p = absolute(r_p) - sqrt(r_p * r_p - self.radius * self.radius)
if (r_p) > 0: s_p = -s_p
else:
s_p = 0.
#Ojo, falta verificar si la lente es fisicamente posible es decir th1>0
th1 = self.thickness - s_a - s_p
zp = float(-self.thickness / 2 + s_a + th1 / 2.)
__c_surf_1 = Cylindrical(shape=Rectangular(size=(2. * self.radius,
th1)),
curvature=1. / self.radius)
__c_surf_2 = Cylindrical(shape=Rectangular(size=(2 * self.radius,
th1)),
curvature=1. / self.radius)
self.surflist["B1"] = (__c_surf_1, (-self.radius, 0, zp), (pi / 2., 0,
pi / 2))
self.surflist["B2"] = (__c_surf_2, (self.radius, 0, zp), (-pi / 2., 0,
pi / 2))
def __init__(self,
size=(20, 20),
thickness=10,
curvature_s1=1. / 200,
curvature_s2=1. / 200,
*args,
**kwargs):
Component.__init__(self, *args, **kwargs)
self.size = size
w, h = self.size
self.thickness = thickness
self.curvature_s1 = curvature_s1
self.curvature_s2 = curvature_s2
if self.curvature_s1 != 0.:
__a_surf = Cylindrical(shape=Rectangular(size=(w, h)),
curvature=self.curvature_s1)
else:
__a_surf = Plane(shape=Rectangular(size=(w, h)))
if self.curvature_s2 != 0:
__p_surf = Cylindrical(shape=Rectangular(size=(w, h)),
curvature=self.curvature_s2)
else:
__p_surf = Plane(shape=Rectangular(size=(w, h)))
self.surflist["S1"] = (__a_surf, (0, 0, -self.thickness / 2), (0, 0,
0))
self.surflist["S2"] = (__p_surf, (0, 0, self.thickness / 2), (0, 0, 0))
def __init__(self,
radius=50.,
thickness=10,
reflectivity=0.5,
*args,
**kwargs):
Component.__init__(self, *args, **kwargs)
__a_surf = Plane(shape=Circular(radius=radius),
reflectivity=reflectivity)
__p_surf = Plane(shape=Circular(radius=radius))
self.surflist["S1"] = (__a_surf, (0, 0, 0), (0, 0, 0))
self.surflist["S2"] = (__p_surf, (0, 0, thickness), (0, 0, 0))
__c_surf_1 = Cylindrical(shape=Rectangular(size=(2. * radius,
thickness)),
curvature=1. / radius)
__c_surf_2 = Cylindrical(shape=Rectangular(size=(2 * radius,
thickness)),
curvature=1. / radius)
self.surflist["B1"] = (__c_surf_1, (-radius, 0, thickness / 2.),
(pi / 2., 0, pi / 2))
self.surflist["B2"] = (__c_surf_2, (radius, 0, thickness / 2.),
(-pi / 2., 0, pi / 2))
def __init__(self, s, l, *args, **kwargs):
#s alto o profundidad del prisma
#l Longitud del lado mas largo del prisma
#La referencia del prisma de dove esta en el centro del prisma
Component.__init__(self, *args, **kwargs)
d = 1.4142135623730951 * s
#Diagonales del prisma
s1 = Plane(shape=Rectangular(size=(d, s)))
s2 = Plane(shape=Rectangular(size=(d, s)))
#Lado largo del prisma
s3 = Plane(shape=Rectangular(size=(l, s)))
#lado corto del prisma
s4 = Plane(shape=Rectangular(size=(l - 2 * s, s)))
sp1 = (l - s) / 2.
self.surflist["S1"] = (s1, (-sp1, 0, 0), (0, -pi / 4, 0))
self.surflist["S2"] = (s2, (sp1, 0, 0), (0, pi / 4, 0))
self.surflist["S3"] = (s3, (0, 0, -s / 2.), (0, 0, 0))
self.surflist["S4"] = (s4, (0, 0, s / 2.), (0, 0, 0))
def __init__(self, sides=3, height=3, inner_radius=10, **traits):
if sides < 3:
raise Exception("Polygon should have at least 3 sides.")
side_length = 2 * inner_radius * np.tan(np.pi / sides)
Component.__init__(self, **traits)
# create a side base shape
side = Plane(shape=Rectangular(size=(side_length, height)))
for i in range(sides):
angle = 2 * np.pi / sides * i
center = inner_radius * np.array([np.cos(angle), np.sin(angle)])
self.surflist[f"S{i}"] = (side, (center[0], center[1], 0),
(np.pi / 2, 0, angle + np.pi / 2))
# create a top/bottom base shape
triangle = Plane(shape=Triangular(((0, 0), (-inner_radius,
-side_length / 2),
(-inner_radius, side_length / 2))))
for i in ['bottom', 'height']:
surface = len(self.surflist)
if i == 'bottom':
offset = -height / 2
else:
offset = height / 2
for i in range(sides):
angle = 2 * np.pi / sides * i
if sides % 2:
offset = 2 * np.pi / (sides * 2)
else:
offset = 0
self.surflist[f"S{i+surface}"] = (triangle, (0, 0, offset),
(0, 0, angle + offset))
def __init__(self, width=50, height=10., reflectivity=0, *args, **kwargs):
Component.__init__(self, *args, **kwargs)
self.width = width
self.height = height
self.reflectivity = reflectivity
__a_face = Plane(shape=Rectangular(size=(self.width, self.height)))
__b_face = Plane(shape=Rectangular(size=(self.width, self.height)))
h = sqrt(2.) * self.width
__h_face = Plane(shape=Rectangular(size=(h, self.height)),
reflectivity=self.reflectivity)
w2 = self.width / 2.
__e1 = Plane(shape=Triangular(((-w2, w2), (-w2, -w2), (w2, -w2))))
__e2 = Plane(shape=Triangular(((-w2, w2), (-w2, -w2), (w2, -w2))))
self.surflist["S1"] = (__a_face, (0, 0, -self.width / 2), (0, 0, 0))
self.surflist["S2"] = (__b_face, (self.width / 2, 0, 0), (0, pi / 2,
0))
self.surflist["S3"] = (__h_face, (0, 0, 0), (0, -pi / 4, 0))
self.surflist["S4"] = (__e1, (0, self.height / 2, 0), (pi / 2, -pi / 2,
0))
self.surflist["S5"] = (__e2, (0, -self.height / 2, 0), (pi / 2,
-pi / 2, 0))
def __init__(self,
size=(50.0, 50.0, 10.0),
reflectivity=0.0,
lpmm=600,
angle=0,
M=[1],
*args,
**kwargs):
Component.__init__(self, *args, **kwargs)
self.size = size
w, h, l = self.size
lpmmx = lpmm * cos(angle)
lpmmy = lpmm * sin(angle)
phf = poly2d([0, 2 * pi * lpmmx, 2 * pi * lpmmy])
__a_surf = RPPMask(shape=Rectangular(size=(w, h)),
phm=phf,
reflectivity=reflectivity,
M=M)
__p_surf = Plane(shape=Rectangular(size=(w, h)))
__u_surf = Plane(shape=Rectangular(size=(w, l)))
__l_surf = Plane(shape=Rectangular(size=(w, l)))
__lf_surf = Plane(shape=Rectangular(size=(l, h)))
__rg_surf = Plane(shape=Rectangular(size=(l, h)))
self.surflist["S1"] = (__a_surf, (0, 0, 0), (0, 0, 0))
self.surflist["S2"] = (__p_surf, (0, 0, l), (0, 0, 0))
self.surflist["S3"] = (__u_surf, (0, h / 2, l / 2.0), (pi / 2, 0, 0))
self.surflist["S4"] = (__l_surf, (0, -h / 2, l / 2.0), (pi / 2, 0, 0))
self.surflist["S5"] = (__lf_surf, (-w / 2, 0, l / 2.0), (0, pi / 2, 0))
self.surflist["S6"] = (__rg_surf, (w / 2, 0, l / 2.0), (0, pi / 2, 0))
def __init__(self, size=(10, 10), transparent=True, *args, **kwargs):
Component.__init__(self, *args, **kwargs)
self.__d_surf = Plane(
shape=Rectangular(size=size)
) #ArrayDetector (size=self.size, transparent=self.transparent)
self.size = size
self.surflist["S1"] = (self.__d_surf, (0, 0, 0), (0, 0, 0))
self.material = 1.
def __init__(self,
radius=4.445,
thickness=7.62,
K=-4.302,
R=3.00,
*args,
**kwargs):
Component.__init__(self, *args, **kwargs)
self.radius = radius
self.thickness = thickness
self.K = K
self.R = R
__a_surf = Aspherical(shape=Circular(radius=self.radius),
Ax=0,
Ay=self.R,
Kx=-1,
Ky=self.K,
poly=poly2d((0, 0)))
self.surflist["S1"] = (__a_surf, (0, 0, 0), (0, 0, 0))
__p_surf = Plane(shape=Circular(radius=(self.radius)))
self.surflist["B1"] = (__p_surf, (0, 0, self.thickness), (0, 0, 0))
def __init__(self, s, *args, **kwargs):
Component.__init__(self, *args, **kwargs)
s1 = Plane(shape=Rectangular(size=(s, s)))
s2 = Plane(shape=Rectangular(size=(s, s)))
d = s / cos(radians(22.5))
s3 = Plane(shape=Rectangular(size=(d, s)), reflectivity=1)
s4 = Plane(shape=Rectangular(size=(d, s)), reflectivity=1)
d1 = d * sin(radians(22.5) / 2.)
s5 = Plane(shape=Rectangular(size=(2 * sqrt(2) * d1, s)))
self.surflist["S1"] = (s1, (0, 0, -s / 2.), (0, 0, 0))
self.surflist["S2"] = (s2, (s / 2., 0, 0), (0, pi / 2, 0))
self.surflist["S3"] = (s3, (0, 0, s / 2. + d1), (0, pi / 8, 0))
self.surflist["S4"] = (s4, (-s / 2. - d1, 0, 0), (0, 3 * pi / 8, 0))
self.surflist["S5"] = (s5, (-s / 2. - d1, 0, s / 2. + d1), (0, -pi / 4,
0))
def __init__(self,
size=(50., 50., 10.),
reflectivity=0.5,
*args,
**kwargs):
Component.__init__(self, *args, **kwargs)
self.size = size
w, h, l = self.size
__a_surf = Plane(shape=Rectangular(size=(w, h)),
reflectivity=reflectivity)
__p_surf = Plane(shape=Rectangular(size=(w, h)))
__u_surf = Plane(shape=Rectangular(size=(w, l)))
__l_surf = Plane(shape=Rectangular(size=(w, l)))
__lf_surf = Plane(shape=Rectangular(size=(l, h)))
__rg_surf = Plane(shape=Rectangular(size=(l, h)))
self.surflist["S1"] = (__a_surf, (0, 0, 0), (0, 0, 0))
self.surflist["S2"] = (__p_surf, (0, 0, l), (0, 0, 0))
self.surflist["S3"] = (__u_surf, (0, h / 2, l / 2.), (pi / 2, 0, 0))
self.surflist["S4"] = (__l_surf, (0, -h / 2, l / 2.), (pi / 2, 0, 0))
self.surflist["S5"] = (__lf_surf, (-w / 2, 0, l / 2.), (0, pi / 2, 0))
self.surflist["S6"] = (__rg_surf, (w / 2, 0, l / 2.), (0, pi / 2, 0))
def __init__(self, s, *args, **kwargs):
"""
:param s: alto y base de las entradas del pentaprisma
:param args:
:param kwargs:
:return:
"""
s1 = Plane(shape=Rectangular(size=(s, s)))
s2 = Plane(shape=Rectangular(size=(s, s)))
d = s / cos(radians(22.5))
s3 = Plane(shape=Rectangular(size=(d, s)), reflectivity=1)
s4 = Plane(shape=Rectangular(size=(d, s)), reflectivity=1)
d1 = d * sin(radians(22.5) / 2.)
s5 = Plane(shape=Rectangular(size=(2 * sqrt(2) * d1, s)))
self.surflist["S1"] = (s1, (0, 0, -s / 2.), (0, 0, 0))
self.surflist["S2"] = (s2, (s / 2., 0, 0), (0, pi / 2, 0))
self.surflist["S3"] = (s3, (0, 0, s / 2. + d1), (0, pi / 8, 0))
self.surflist["S4"] = (s4, (-s / 2. - d1, 0, 0), (0, 3 * pi / 8, 0))
self.surflist["S5"] = (s5, (-s / 2. - d1, 0, s / 2. + d1), (0, -pi / 4,
0))
def __init__(self, size=(10, 10, 10), **traits):
Component.__init__(self, **traits)
self.size = size
w, h, l = self.size
__a_surf = Plane(shape=Rectangular(size=(w, h)))
__p_surf = Plane(shape=Rectangular(size=(w, h)))
__u_surf = Plane(shape=Rectangular(size=(w, l)))
__l_surf = Plane(shape=Rectangular(size=(w, l)))
__lf_surf = Plane(shape=Rectangular(size=(l, h)))
__rg_surf = Plane(shape=Rectangular(size=(l, h)))
self.surflist["S1"] = (__a_surf, (0, 0, -l / 2), (0, 0, 0))
self.surflist["S2"] = (__p_surf, (0, 0, l / 2), (0, 0, 0))
self.surflist["S3"] = (__u_surf, (0, h / 2, 0), (pi / 2, 0, 0))
self.surflist["S4"] = (__l_surf, (0, -h / 2, 0), (pi / 2, 0, 0))
self.surflist["S5"] = (__lf_surf, (-w / 2, 0, 0), (0, pi / 2, 0))
self.surflist["S6"] = (__rg_surf, (w / 2, 0, 0), (0, pi / 2, 0))
class CCD(Component):
'''Class to define a CCD like detector
:param size: Tuple with the phisical size (sx,sy) of the CCD chip
:type size: tuple(float, float)
:param transparent: Boolean to set the detector transparent characteristic.
Not implemented
:type transparent: bool
Using the same CCD, images of different resolutions can be simulated. See
the im_show and spot_diagram methods
'''
# Geometrical size of the CCD chip
#size = Tuple(Float(5),Float(5))
# Setting this attribute to *False*, make the CCD detector opaque
#transparent=Bool(True)
# Private attributes
# detector surface
#__d_surf = Instance(ArrayDetector)
#__d_surf = Instance(Plane)
def _get_hitlist(self):
return tuple(self.__d_surf.hit_list)
hit_list = property(_get_hitlist)
"""List containing a tuple for each ray hitting the CCD. The first component
of the tuple is the coordinates of intersection of the ray with the CCD
(in its coordinate system). The second component of each tuple points to the
:class:`~pyoptools.raytrace.ray.Ray` that intersected the CCD.
"""
def __init__(self, size=(10, 10), transparent=True, *args, **kwargs):
Component.__init__(self, *args, **kwargs)
self.__d_surf = Plane(
shape=Rectangular(size=size)
) #ArrayDetector (size=self.size, transparent=self.transparent)
self.size = size
self.surflist["S1"] = (self.__d_surf, (0, 0, 0), (0, 0, 0))
self.material = 1.
#~ def __reduce__(self):
#~ args=() #self.intensity,self.wavelength,self.n ,self.label,self.parent,self.pop,self.orig_surf)
#~ return(type(self),args,self.__getstate__())
#~
#~
#~ #TODO: Check if there is a better way to do this, because we are
#~ #rewriting the constructor values here
#~
#~ def __getstate__(self):
#~ return self.__d_surf,self.size,self.surflist,self.material
#~
#~ def __setstate__(self,state):
#~ self.__d_surf,self.size,self.surflist,self.material=state
def get_image(self, size=(256, 256)):
"""
Returns the ccd hit_list as a grayscale PIL image
:param size: Tuple (dx,dy) containing the image size in pixels. Use this
a ttribute to set the simulated resolution.
"""
data = self.__d_surf.get_histogram(size)
return (fromarray(data))
def get_color_image(self, size=(256, 256)):
"""
Returns the CCD hit_list as a color image, using the rays wavelength.
:param size: Tuple (dx,dy) containing the image size in pixels. Use this
attribute to set the simulated resolution.
"""
data = self.__d_surf.get_color_histogram(size)
return (fromarray(data, high=255, low=0))
#~ def im_show(self,fig=None, size=(256,256),cmap=cm.gray,title='Image',color=False):
#~ """Shows a simulated image
#~
#~ *Attributes:*
#~
#~ *size*
#~ Tuple (dx,dy) containing the image size in pixels. Use this
#~ attribute to set the simulated resolution.
#~ *cmap*
#~ Color map to use in the image simulation. See the matplotlib.cm
#~ module for information about colormaps.
#~ *fig*
#~ Pylab figure where the plot will be made. If set to None
#~ a new figure will be created.
#~ """
#~ if fig == None:
#~ fig=figure()
#~
#~ self.__d_surf.im_show(size,cmap,title,color)
#~
#~
#~ def spot_diagram(self,fig=None, style="o", label=None):
#~ '''Plot a spot diagram in a pylab figure
#~
#~ Method that plots a spot diagram of the rays hitting the CCD.
#~
#~ *Attributes:*
#~
#~ *fig*
#~ Pylab figure where the plot will be made. If set to None
#~ a new figure will be created.
#~
#~ *style*
#~ Symbol to be used to represent the spot. See the pylab plot
#~ documentation for more information.
#~
#~ *label*
#~ String containing the label to show in the figure for this spot diagram.
#~ Can be used to identify different spot diagrams on the same figure.
#~ '''
#~
#~ if fig == None:
#~ fig=figure()
#~ X=[]
#~ Y=[]
#~ COL=[]
#~ if len(self.__d_surf._hit_list) >0:
#~ for i in self.__d_surf._hit_list:
#~ p=i[0]
#~ # Hitlist[1] points to the incident ray
#~ col=wavelength2RGB(i[1].wavelength)
#~ X.append(p[0])
#~ Y.append(p[1])
#~ COL.append(col)
#~ if label== None:
#~ plot(X, Y, style, figure=fig)
#~ else:
#~ plot(X, Y, style,label=label,figure=fig)
#~ legend()
#~ return fig
def get_optical_path_map(self, size=(20, 20), mask=None):
"""Return the optical path of the rays hitting the detector.
This method uses the optical path of the rays hitting the surface to
create a optical path map. The returned value is an interpolation of the
values obtained by the rays.
.. warning::
If the rays hitting the surface are produced by more than one
optical source, the returned map might not be valid.
:param size: Tuple (nx,ny) containing the number of samples of the
returned map. The map size will be the same as the CCD
:param mask: :class:`~pyoptools.raytrace.shape.Shape`
instance containing the mask of the aperture. If not given,
the mask will be automatically calculated.
:return: A masked array as defined in the numpy.ma module, containing
the optical paths
"""
X, Y, Z = self.get_optical_path_data()
rv = bisplrep(X, Y, Z)
nx, ny = size
xs, ys = self.size
xi = -xs / 2.
xf = -xi
yi = -ys / 2.
yf = -yi
xd = linspace(xi, xf, nx)
yd = linspace(yi, yf, ny)
data = bisplev(xd, yd, rv)
if mask != None:
assert (isinstance(mask, Shape))
X, Y = meshgrid(xd, yd)
m = ~mask.hit((X, Y, 0))
retval = ma.array(data, mask=m)
else:
retval = data
return retval
def get_optical_path_map_lsq(self, order=10):
"""Return a 2D polinomial describing the the optical path of the
rays hitting the detector.
:param order: Order of the polynomial used to fit the data
:return: tuple (e, p) where e es the rms error of the data when compared
with the returned polynomial, and p is a
:class:`~pyoptools.misc.Poly2D.poly2d` instance.
"""
X, Y, Z = self.get_optical_path_data()
e, p = polyfit2d(X, Y, Z, order=order)
return e, p
def get_optical_path_data(self):
"""Return the optical path of the rays hitting the detector.
This method returns a tuple X,Y,D, containing the X,Y hit points, and
D containing the optical path data
.. warning::
If the rays hitting the surface are produced by more than one
optical source, the information may not be valid.
"""
X = []
Y = []
Z = []
for ip, r in self.hit_list:
x, y, z = ip
d = r.optical_path()
X.append(x)
Y.append(y)
Z.append(d)
return X, Y, Z
def __init__(
self,
outer_diameter=8.0,
thickness=3.0,
material=1.5,
origin="center",
s1={
"diameter": 6.0,
"roc": 3.0,
"k": -1.5,
"polycoefficents": (0, 0, 0, 0, 3e-3, 0, -10e-6),
"max_thickness": None,
},
s2=None,
*args,
**kwargs):
Component.__init__(self, *args, **kwargs)
self.material = material
self.thickness = thickness
self.outer_diameter = outer_diameter
# Fill defaults and put surface definitions into namespaces
if not "max_thickness" in s1:
s1["max_thickness"] = None
if s2 is not None and not "max_thickness" in s2:
s2["max_thickness"] = None
s1_defn = SimpleNamespace(**s1)
if s2 is not None:
s2_defn = SimpleNamespace(**s2)
else:
s2_defn = None
self.s1_defn, self.s2_defn = (s1_defn, s2_defn)
# Auto select outer diameter if None
if self.outer_diameter is None:
candidates = [s1_defn.diameter]
if s2 is not None:
candidates.append(s2_defn.diameter)
self.outer_diameter = max(candidates)
# Start side thickness calculation, surfaces will be subtracted from this
side_thickness = thickness
# First surface
s1_surf = Aspherical(
shape=Circular(radius=0.5 * s1_defn.diameter),
Ax=1.0 / s1_defn.roc,
Ay=1.0 / s1_defn.roc,
Kx=s1_defn.k,
Ky=s1_defn.k,
poly=poly1Drot(s1_defn.polycoefficents),
)
if s1_defn.max_thickness is None:
s1_defn.max_thickness = s1_surf.topo(s1_defn.diameter / 2.0, 0)
side_thickness -= s1_defn.max_thickness
self.surflist.append((s1_surf, (0, 0, 0), (0, 0, pi / 2)))
# Second surface
if s2_defn is None:
s2_surf = Plane(shape=Circular(radius=0.5 * self.outer_diameter))
else:
s2_surf = Aspherical(
shape=Circular(radius=0.5 * s2_defn.diameter),
Ax=1.0 / s2_defn.roc,
Ay=1.0 / s2_defn.roc,
Kx=s2_defn.k,
Ky=s2_defn.k,
poly=poly1Drot(s2_defn.polycoefficents),
)
if s2_defn.max_thickness is None:
s2_defn.max_thickness = s2_surf.topo(s2_defn.diameter / 2.0, 0)
side_thickness -= s2_defn.max_thickness
self.surflist.append((s2_surf, (0, 0, thickness), (0, pi, pi / 2)))
# Outer edge
if side_thickness > 0:
outer_edge = Cylinder(radius=self.outer_diameter / 2,
length=side_thickness)
self.surflist.append((
outer_edge,
(0, 0, s1_defn.max_thickness + 0.5 * side_thickness),
(0, 0, pi / 2),
))
elif side_thickness < 0:
raise InvalidGeometryException(
"Lens is not thick enough to support surfaces.")
# Brim
self._add_brim(s1_defn, s1_defn.max_thickness)
if s2_defn is not None:
self._add_brim(s2_defn, thickness - s2_defn.max_thickness)
# Apply offset
self._translate_origin(origin)
def __init__(self, size=(10,10), transparent=True,*args,**kwargs):
Component.__init__(self, *args, **kwargs)
self.__d_surf= Plane(shape=Rectangular(size=size))#ArrayDetector (size=self.size, transparent=self.transparent)
self.size=size
self.surflist["S1"]=(self.__d_surf,(0,0,0),(0,0,0))
self.material=1.
class CCD(Component):
'''**Class to define a CCD like detector**
*Attributes:*
*size*
Tuple with the phisical size of the CCD chip
*transparent*
Boolean to set the detector transparent characteristic. Not implemented
Using the same CCD, images of different resolutions can be simulated. See
the im_show and spot_diagram methods
'''
# Geometrical size of the CCD chip
#size = Tuple(Float(5),Float(5))
# Setting this attribute to *False*, make the CCD detector opaque
#transparent=Bool(True)
# Private attributes
# detector surface
#__d_surf = Instance(ArrayDetector)
#__d_surf = Instance(Plane)
def _get_hitlist(self):
return tuple(self.__d_surf.hit_list)
hit_list=property(_get_hitlist)
def __init__(self, size=(10,10), transparent=True,*args,**kwargs):
Component.__init__(self, *args, **kwargs)
self.__d_surf= Plane(shape=Rectangular(size=size))#ArrayDetector (size=self.size, transparent=self.transparent)
self.size=size
self.surflist["S1"]=(self.__d_surf,(0,0,0),(0,0,0))
self.material=1.
#~ def __reduce__(self):
#~ args=() #self.intensity,self.wavelength,self.n ,self.label,self.parent,self.pop,self.orig_surf)
#~ return(type(self),args,self.__getstate__())
#~
#~
#~ #TODO: Check if there is a better way to do this, because we are
#~ #rewriting the constructor values here
#~
#~ def __getstate__(self):
#~ return self.__d_surf,self.size,self.surflist,self.material
#~
#~ def __setstate__(self,state):
#~ self.__d_surf,self.size,self.surflist,self.material=state
def get_image(self,size=(256,256)):
"""
Returns the ccd hit_list as a grayscale PIL image
*Attributes:*
*size*
Tuple (dx,dy) containing the image size in pixels. Use this
attribute to set the simulated resolution.
"""
data= self.__d_surf.get_histogram(size)
return(toimage(data, high=255, low=0,cmin=0,cmax=data.max()))
def get_color_image(self, size=(256,256)):
"""
Returns the CCD hit_list as a color image, using the rays wavelenght.
*Attributes*
*size*
Tuple (dx,dy) containing the image size in pixels. Use this
attribute to set the simulated resolution.
"""
data= self.__d_surf.get_color_histogram(size)
return(toimage(data, high=255, low=0))
#~ def im_show(self,fig=None, size=(256,256),cmap=cm.gray,title='Image',color=False):
#~ """Shows a simulated image
#~
#~ *Attributes:*
#~
#~ *size*
#~ Tuple (dx,dy) containing the image size in pixels. Use this
#~ attribute to set the simulated resolution.
#~ *cmap*
#~ Color map to use in the image simulation. See the matplotlib.cm
#~ module for information about colormaps.
#~ *fig*
#~ Pylab figure where the plot will be made. If set to None
#~ a new figure will be created.
#~ """
#~ if fig == None:
#~ fig=figure()
#~
#~ self.__d_surf.im_show(size,cmap,title,color)
#~
#~
#~ def spot_diagram(self,fig=None, style="o", label=None):
#~ '''Plot a spot diagram in a pylab figure
#~
#~ Method that plots a spot diagram of the rays hitting the CCD.
#~
#~ *Attributes:*
#~
#~ *fig*
#~ Pylab figure where the plot will be made. If set to None
#~ a new figure will be created.
#~
#~ *style*
#~ Symbol to be used to represent the spot. See the pylab plot
#~ documentation for more information.
#~
#~ *label*
#~ String containig the label to show in the figure for this spot diagram.
#~ Can be used to identify diferent spot diagrams on the same figure.
#~ '''
#~
#~ if fig == None:
#~ fig=figure()
#~ X=[]
#~ Y=[]
#~ COL=[]
#~ if len(self.__d_surf._hit_list) >0:
#~ for i in self.__d_surf._hit_list:
#~ p=i[0]
#~ # Hitlist[1] points to the incident ray
#~ col=wavelength2RGB(i[1].wavelength)
#~ X.append(p[0])
#~ Y.append(p[1])
#~ COL.append(col)
#~ if label== None:
#~ plot(X, Y, style, figure=fig)
#~ else:
#~ plot(X, Y, style,label=label,figure=fig)
#~ legend()
#~ return fig
def get_optical_path_map(self,size=(20, 20), mask=None):
"""Return the optical path of the rays hitting the detector.
This method uses the optical path of the rays hitting the surface, to
create a optical path map. The returned value is an interpolation of the
values obtained by the rays.
Warning:
If the rays hitting the surface are produced by more than one
optical source, the returned map migth not be valid.
*Atributes*
*size*
Tuple (nx,ny) containing the number of samples of the returned map.
The map size will be the same as the CCD
*mask*
Shape instance containig the mask of the apperture. If not given,
the mask will be automatically calculated.
*Return value*
A masked array as defined in the numpy.ma module, containig the optical paths
"""
X,Y,Z=self.get_optical_path_data()
rv=bisplrep(X,Y,Z)
nx, ny=size
xs, ys=self.size
xi=-xs/2.
xf=-xi
yi=-ys/2.
yf=-yi
xd=linspace(xi, xf,nx)
yd=linspace(yi, yf,ny)
data=bisplev(xd,yd,rv)
if mask!=None:
assert(isinstance(mask, Shape))
X, Y=meshgrid(xd, yd)
m= ~mask.hit((X, Y, 0))
retval= ma.array(data, mask=m)
else:
retval=data
return retval
def get_optical_path_map_lsq(self,order=10):
"""Return the optical path of the rays hitting the detector.
*Atributes*
"""
X,Y,Z=self.get_optical_path_data()
e,p=polyfit2d(X, Y, Z, order=order)
return e,p
def get_optical_path_data(self):
"""Return the optical path of the rays hitting the detector.
This method returns a tuple X,Y,D, containing the X,Y hit points, and
D containing tha optical path data
Warning:
If the rays hitting the surface are produced by more than one
optical source, the information may not be valid.
"""
X=[]
Y=[]
Z=[]
for ip,r in self.hit_list:
x,y,z= ip
d= r.optical_path()
X.append(x)
Y.append(y)
Z.append(d)
return X,Y,Z
