def nextCmd(snmpEngine, authData, transportTarget, contextData, *varBinds,
**options):
"""Creates a generator to perform one or more SNMP GETNEXT queries.
On each iteration, new SNMP GETNEXT request is send
(:RFC:`1905#section-4.2.2`). The iterator blocks waiting for response
to arrive or error to occur.
Parameters
----------
snmpEngine : :py:class:`~pysnmp.hlapi.SnmpEngine`
Class instance representing SNMP engine.
authData : :py:class:`~pysnmp.hlapi.CommunityData` or :py:class:`~pysnmp.hlapi.UsmUserData`
Class instance representing SNMP credentials.
transportTarget : :py:class:`~pysnmp.hlapi.asyncore.UdpTransportTarget` or :py:class:`~pysnmp.hlapi.asyncore.Udp6TransportTarget`
Class instance representing transport type along with SNMP peer address.
contextData : :py:class:`~pysnmp.hlapi.ContextData`
Class instance representing SNMP ContextEngineId and ContextName values.
\*varBinds : :py:class:`~pysnmp.smi.rfc1902.ObjectType`
One or more class instances representing MIB variables to place
into SNMP request.
Other Parameters
----------------
\*\*options :
Request options:
* `lookupMib` - load MIB and resolve response MIB variables at
the cost of slightly reduced performance. Default is `True`.
Default is `True`.
* `lexicographicMode` - stop iteration when all response MIB
variables leave the scope of initial MIB variables in
`varBinds`. Default is `True`.
* `ignoreNonIncreasingOid` - continue iteration even if response
MIB variables (OIDs) are not greater then request MIB variables.
Default is `False`.
* `maxRows` - stop iteration once this generator instance processed
`maxRows` of SNMP conceptual table. Default is `0` (no limit).
* `maxCalls` - stop iteration once this generator instance processed
`maxCalls` responses. Default is 0 (no limit).
Yields
------
errorIndication : str
True value indicates SNMP engine error.
errorStatus : str
True value indicates SNMP PDU error.
errorIndex : int
Non-zero value refers to `varBinds[errorIndex-1]`
varBinds : tuple
A sequence of :py:class:`~pysnmp.smi.rfc1902.ObjectType` class
instances representing MIB variables returned in SNMP response.
Raises
------
PySnmpError
Or its derivative indicating that an error occurred while
performing SNMP operation.
Notes
-----
The `nextCmd` generator will be exhausted on any of the following
conditions:
* SNMP engine error occurs thus `errorIndication` is `True`
* SNMP PDU `errorStatus` is reported as `True`
* SNMP :py:class:`~pysnmp.proto.rfc1905.EndOfMibView` values
(also known as *SNMP exception values*) are reported for all
MIB variables in `varBinds`
* *lexicographicMode* option is set to `False` and all
response MIB variables leave the scope of `varBinds`
At any moment a new sequence of `varBinds` could be send back into
running generator (supported since Python 2.6).
Examples
--------
>>> from pysnmp.hlapi import *
>>> g = nextCmd(SnmpEngine(),
... CommunityData('public'),
... UdpTransportTarget(('demo.snmplabs.com', 161)),
... ContextData(),
... ObjectType(ObjectIdentity('SNMPv2-MIB', 'sysDescr')))
>>> next(g)
(None, 0, 0, [ObjectType(ObjectIdentity(ObjectName('1.3.6.1.2.1.1.1.0')), DisplayString('SunOS zeus.snmplabs.com 4.1.3_U1 1 sun4m'))])
>>> g.send( [ ObjectType(ObjectIdentity('IF-MIB', 'ifInOctets')) ] )
(None, 0, 0, [(ObjectName('1.3.6.1.2.1.2.2.1.10.1'), Counter32(284817787))])
"""
# noinspection PyShadowingNames
def cbFun(snmpEngine, sendRequestHandle, errorIndication, errorStatus,
errorIndex, varBindTable, cbCtx):
cbCtx['errorIndication'] = errorIndication
cbCtx['errorStatus'] = errorStatus
cbCtx['errorIndex'] = errorIndex
cbCtx['varBindTable'] = varBindTable
lexicographicMode = options.get('lexicographicMode', True)
ignoreNonIncreasingOid = options.get('ignoreNonIncreasingOid', False)
maxRows = options.get('maxRows', 0)
maxCalls = options.get('maxCalls', 0)
cbCtx = {}
vbProcessor = CommandGeneratorVarBinds()
initialVars = [
x[0] for x in vbProcessor.makeVarBinds(snmpEngine, varBinds)
]
totalRows = totalCalls = 0
while True:
if varBinds:
cmdgen.nextCmd(
snmpEngine, authData, transportTarget, contextData,
*[(x[0], Null()) for x in varBinds],
**dict(cbFun=cbFun,
cbCtx=cbCtx,
lookupMib=options.get('lookupMib', True)))
snmpEngine.transportDispatcher.runDispatcher()
errorIndication = cbCtx['errorIndication']
errorStatus = cbCtx['errorStatus']
errorIndex = cbCtx['errorIndex']
if ignoreNonIncreasingOid and errorIndication and \
isinstance(errorIndication, errind.OidNotIncreasing):
errorIndication = None
if errorIndication:
yield (errorIndication, errorStatus, errorIndex, varBinds)
return
elif errorStatus:
if errorStatus == 2:
# Hide SNMPv1 noSuchName error which leaks in here
# from SNMPv1 Agent through internal pysnmp proxy.
errorStatus = errorStatus.clone(0)
errorIndex = errorIndex.clone(0)
yield (errorIndication, errorStatus, errorIndex, varBinds)
return
else:
varBinds = cbCtx['varBindTable'] and cbCtx['varBindTable'][0]
for idx, varBind in enumerate(varBinds):
name, val = varBind
if not isinstance(val, Null):
if lexicographicMode or initialVars[idx].isPrefixOf(
name):
break
else:
return
totalRows += 1
totalCalls += 1
else:
errorIndication = errorStatus = errorIndex = None
varBinds = []
initialVarBinds = (yield errorIndication, errorStatus, errorIndex,
varBinds)
if initialVarBinds:
varBinds = initialVarBinds
initialVars = [
x[0] for x in vbProcessor.makeVarBinds(snmpEngine, varBinds)
]
if maxRows and totalRows >= maxRows or \
maxCalls and totalCalls >= maxCalls:
return
def nextCmd(snmpEngine, authData, transportTarget, contextData,
*varBinds, **options):
# noinspection PyShadowingNames
def cbFun(snmpEngine, sendRequestHandle,
errorIndication, errorStatus, errorIndex,
varBindTable, cbCtx):
cbCtx['errorIndication'] = errorIndication
cbCtx['errorStatus'] = errorStatus
cbCtx['errorIndex'] = errorIndex
cbCtx['varBindTable'] = varBindTable
lexicographicMode = options.get('lexicographicMode', True)
ignoreNonIncreasingOid = options.get('ignoreNonIncreasingOid', False)
maxRows = options.get('maxRows', 0)
maxCalls = options.get('maxCalls', 0)
cbCtx = {}
vbProcessor = CommandGeneratorVarBinds()
initialVars = [x[0] for x in vbProcessor.makeVarBinds(snmpEngine, varBinds)]
totalRows = totalCalls = 0
while True:
cmdgen.nextCmd(snmpEngine, authData, transportTarget, contextData,
*[(x[0], Null()) for x in varBinds],
**dict(cbFun=cbFun, cbCtx=cbCtx,
lookupMib=options.get('lookupMib', True)))
snmpEngine.transportDispatcher.runDispatcher()
errorIndication = cbCtx['errorIndication']
errorStatus = cbCtx['errorStatus']
errorIndex = cbCtx['errorIndex']
if ignoreNonIncreasingOid and errorIndication and \
isinstance(errorIndication, errind.OidNotIncreasing):
errorIndication = None
if errorIndication:
yield errorIndication, errorStatus, errorIndex, varBinds
if errorIndication != errind.requestTimedOut:
return
elif errorStatus:
if errorStatus == 2:
# Hide SNMPv1 noSuchName error which leaks in here
# from SNMPv1 Agent through internal pysnmp proxy.
errorStatus = errorStatus.clone(0)
errorIndex = errorIndex.clone(0)
yield errorIndication, errorStatus, errorIndex, varBinds
return
else:
varBinds = cbCtx['varBindTable'] and cbCtx['varBindTable'][0]
for idx, varBind in enumerate(varBinds):
name, val = varBind
if not isinstance(val, Null):
if lexicographicMode or initialVars[idx].isPrefixOf(name):
break
else:
return
totalRows += 1
totalCalls += 1
yield errorIndication, errorStatus, errorIndex, varBinds
if maxRows and totalRows >= maxRows or \
maxCalls and totalCalls >= maxCalls:
return
def nextCmd(snmpEngine, authData, transportTarget, contextData, *varBinds,
**options):
# noinspection PyShadowingNames
def cbFun(snmpEngine, sendRequestHandle, errorIndication, errorStatus,
errorIndex, varBindTable, cbCtx):
cbCtx['errorIndication'] = errorIndication
cbCtx['errorStatus'] = errorStatus
cbCtx['errorIndex'] = errorIndex
cbCtx['varBindTable'] = varBindTable
lexicographicMode = options.get('lexicographicMode', True)
ignoreNonIncreasingOid = options.get('ignoreNonIncreasingOid', False)
maxRows = options.get('maxRows', 0)
maxCalls = options.get('maxCalls', 0)
cbCtx = {}
vbProcessor = CommandGeneratorVarBinds()
initialVars = [
x[0] for x in vbProcessor.makeVarBinds(snmpEngine, varBinds)
]
totalRows = totalCalls = 0
while True:
cmdgen.nextCmd(
snmpEngine, authData, transportTarget, contextData,
*[(x[0], Null()) for x in varBinds],
**dict(cbFun=cbFun,
cbCtx=cbCtx,
lookupMib=options.get('lookupMib', True)))
snmpEngine.transportDispatcher.runDispatcher()
errorIndication = cbCtx['errorIndication']
errorStatus = cbCtx['errorStatus']
errorIndex = cbCtx['errorIndex']
if ignoreNonIncreasingOid and errorIndication and \
isinstance(errorIndication, errind.OidNotIncreasing):
errorIndication = None
if errorIndication:
yield errorIndication, errorStatus, errorIndex, varBinds
if errorIndication != errind.requestTimedOut:
return
elif errorStatus:
if errorStatus == 2:
# Hide SNMPv1 noSuchName error which leaks in here
# from SNMPv1 Agent through internal pysnmp proxy.
errorStatus = errorStatus.clone(0)
errorIndex = errorIndex.clone(0)
yield errorIndication, errorStatus, errorIndex, varBinds
return
else:
varBinds = cbCtx['varBindTable'] and cbCtx['varBindTable'][0]
for idx, varBind in enumerate(varBinds):
name, val = varBind
if not isinstance(val, Null):
if lexicographicMode or initialVars[idx].isPrefixOf(name):
break
else:
return
totalRows += 1
totalCalls += 1
yield errorIndication, errorStatus, errorIndex, varBinds
if maxRows and totalRows >= maxRows or \
maxCalls and totalCalls >= maxCalls:
return
def nextCmd(snmpEngine, authData, transportTarget, contextData, *varBinds, **options):
"""Creates a generator to perform one or more SNMP GETNEXT queries.
On each iteration, new SNMP GETNEXT request is send
(:RFC:`1905#section-4.2.2`). The iterator blocks waiting for response
to arrive or error to occur.
Parameters
----------
snmpEngine : :py:class:`~pysnmp.hlapi.SnmpEngine`
Class instance representing SNMP engine.
authData : :py:class:`~pysnmp.hlapi.CommunityData` or :py:class:`~pysnmp.hlapi.UsmUserData`
Class instance representing SNMP credentials.
transportTarget : :py:class:`~pysnmp.hlapi.asyncore.UdpTransportTarget` or :py:class:`~pysnmp.hlapi.asyncore.Udp6TransportTarget`
Class instance representing transport type along with SNMP peer address.
contextData : :py:class:`~pysnmp.hlapi.ContextData`
Class instance representing SNMP ContextEngineId and ContextName values.
\*varBinds : :py:class:`~pysnmp.smi.rfc1902.ObjectType`
One or more class instances representing MIB variables to place
into SNMP request.
Other Parameters
----------------
\*\*options :
Request options:
* `lookupMib` - load MIB and resolve response MIB variables at
the cost of slightly reduced performance. Default is `True`.
Default is `True`.
* `lexicographicMode` - stop iteration when all response MIB
variables leave the scope of initial MIB variables in
`varBinds`. Default is `True`.
* `ignoreNonIncreasingOid` - continue iteration even if response
MIB variables (OIDs) are not greater then request MIB variables.
Default is `False`.
* `maxRows` - stop iteration once this generator instance processed
`maxRows` of SNMP conceptual table. Default is `0` (no limit).
* `maxCalls` - stop iteration once this generator instance processed
`maxCalls` responses. Default is 0 (no limit).
Yields
------
errorIndication : str
True value indicates SNMP engine error.
errorStatus : str
True value indicates SNMP PDU error.
errorIndex : int
Non-zero value refers to `varBinds[errorIndex-1]`
varBinds : tuple
A sequence of :py:class:`~pysnmp.smi.rfc1902.ObjectType` class
instances representing MIB variables returned in SNMP response.
Raises
------
PySnmpError
Or its derivative indicating that an error occurred while
performing SNMP operation.
Notes
-----
The `nextCmd` generator will be exhausted on any of the following
conditions:
* SNMP engine error occurs thus `errorIndication` is `True`
* SNMP PDU `errorStatus` is reported as `True`
* SNMP :py:class:`~pysnmp.proto.rfc1905.EndOfMibView` values
(also known as *SNMP exception values*) are reported for all
MIB variables in `varBinds`
* *lexicographicMode* option is set to `False` and all
response MIB variables leave the scope of `varBinds`
At any moment a new sequence of `varBinds` could be send back into
running generator (supported since Python 2.6).
Examples
--------
>>> from pysnmp.hlapi.asyncore import *
>>> g = nextCmd(SnmpEngine(),
... CommunityData('public'),
... UdpTransportTarget(('demo.snmplabs.com', 161)),
... ContextData(),
... ObjectType(ObjectIdentity('SNMPv2-MIB', 'sysDescr')))
>>> next(g)
(None, 0, 0, [ObjectType(ObjectIdentity(ObjectName('1.3.6.1.2.1.1.1.0')), DisplayString('SunOS zeus.snmplabs.com 4.1.3_U1 1 sun4m'))])
>>> g.send( [ ObjectType(ObjectIdentity('IF-MIB', 'ifInOctets')) ] )
(None, 0, 0, [(ObjectName('1.3.6.1.2.1.2.2.1.10.1'), Counter32(284817787))])
"""
def cbFun(snmpEngine, sendRequestHandle, errorIndication, errorStatus, errorIndex, varBindTable, cbCtx):
cbCtx["errorIndication"] = errorIndication
cbCtx["errorStatus"] = errorStatus
cbCtx["errorIndex"] = errorIndex
cbCtx["varBindTable"] = varBindTable
lexicographicMode = options.get("lexicographicMode", True)
ignoreNonIncreasingOid = options.get("ignoreNonIncreasingOid", False)
maxRows = options.get("maxRows", 0)
maxCalls = options.get("maxCalls", 0)
cbCtx = {}
vbProcessor = CommandGeneratorVarBinds()
initialVars = [x[0] for x in vbProcessor.makeVarBinds(snmpEngine, varBinds)]
totalRows = totalCalls = 0
while True:
if varBinds:
cmdgen.nextCmd(
snmpEngine,
authData,
transportTarget,
contextData,
*[(x[0], Null()) for x in varBinds],
**dict(cbFun=cbFun, cbCtx=cbCtx, lookupMib=options.get("lookupMib", True))
)
snmpEngine.transportDispatcher.runDispatcher()
errorIndication = cbCtx["errorIndication"]
errorStatus = cbCtx["errorStatus"]
errorIndex = cbCtx["errorIndex"]
if ignoreNonIncreasingOid and errorIndication and isinstance(errorIndication, errind.OidNotIncreasing):
errorIndication = None
if errorIndication:
yield errorIndication, errorStatus, errorIndex, varBinds
return
elif errorStatus:
if errorStatus == 2:
# Hide SNMPv1 noSuchName error which leaks in here
# from SNMPv1 Agent through internal pysnmp proxy.
errorStatus = errorStatus.clone(0)
errorIndex = errorIndex.clone(0)
yield errorIndication, errorStatus, errorIndex, varBinds
return
else:
varBinds = cbCtx["varBindTable"] and cbCtx["varBindTable"][0]
for idx, varBind in enumerate(varBinds):
name, val = varBind
if not isinstance(val, Null):
if lexicographicMode or initialVars[idx].isPrefixOf(name):
break
else:
return
totalRows += 1
totalCalls += 1
else:
errorIndication = errorStatus = errorIndex = None
varBinds = []
initialVarBinds = (yield errorIndication, errorStatus, errorIndex, varBinds)
if initialVarBinds:
varBinds = initialVarBinds
initialVars = [x[0] for x in vbProcessor.makeVarBinds(snmpEngine, varBinds)]
if maxRows and totalRows >= maxRows or maxCalls and totalCalls >= maxCalls:
return
