def get_bar_code(str_code):
"""
生成防伪码的条形码
:param str_code: 防伪码
"""
encoder = EAN13Encoder(str_code)
encoder.save("barcode\\" + str_code + ".png")
def number7(choice):
mainid = input_check("\033[1;32m 请输入EN13的国家代码（3位） :\33[0m", 3,
3) #输入三位国家代码
compid = input_check("\033[1;32m 请输入EAN13的企业代码（4位）:\33[0m", 3,
4) #输入四位企业代码
incount = input_check("\033[1;32m 请输入要生成的条形码数量:\33[0m", 1,
0) #输入要生成的条形码数量
while int(incount) == 0:
incount = input_check("\033[1;32m 请输入要生成的条形码数量:\33[0m", 1,
0) # 输入要生成的条形码数量
mkdir("barcode") #判断保存条形码的文件是否存在，若不存在则创建
for j in range(int(incount)): #批量生成条形码
strone = ''
for i in range(5): #生成条形码的5位 3+4+5=12 还有一位是校验位
strone = strone + str(random.choice(number))
barcode = mainid + compid + strone #生成12位的条形码
#计算条形码的校验位
evensum = int(barcode[1]) + int(barcode[3]) + int(barcode[5]) + int(barcode[7]) +\
int(barcode[9]) + int(barcode[11])
oddsum = int(barcode[0]) + int(barcode[2]) + int(barcode[4]) + int(barcode[6]) +\
int(barcode[8]) + int(barcode[10])
checkbit = int((10 - (evensum * 3 + oddsum) % 10) % 10) #计算校验位
barcode = barcode + str(checkbit) #组成完整的13位EAN13条形码
print(barcode)
encoder = EAN13Encoder(barcode) #生成条形码
encoder.save("barcode\\" + barcode + ".png") #保存条形码信息图片
def scode7(schoice):
mainid = inputbox("\033[1;32m 请输入EN13的国家代码（3位） :\33[0m", 3,
3) # 输入3位国家代码
# while int(mainid) < 1 or len(mainid) != 3: # 验证输入是否为3位数字（转为整数后小于1和长度不等于3，重新输入）
# mainid = inputbox("\033[1;32m 请输入EAN13的国家代码（3位）::\33[0m", 1, 0)
compid = inputbox("\033[1;32m 请输入EAN13的企业代码（4位）:\33[0m", 3,
4) # 输入4位企业代码
# while int(compid) < 1 or len(compid) != 4: # 验证输入是否为4位数字
# compid = inputbox("\033[1;32m 请输入EAN13的企业代码（4位）:\33[0m", 1, 0)
incount = inputbox("\033[1;32m 请输入要生成的条形码数量:\33[0m", 1,
0) # 输入要生成的条形码数量
while int(incount) == 0: # 输入信息转为整数后等于0，重新输入
incount = inputbox("\033[1;32m 请输入要生成的条形码数量:\33[0m", 1, 0)
mkdir("barcode") # 判断保存条形码的文件夹是否存在，不存在，则创建该文件夹
for j in range(int(incount)): # 批量生成条形码
strone = '' # 清空存储单条条形码的变量
for i in range(5): # 生成条形码的6位（除国家代码、企业代码和校验位之外的6位）数字
strone = strone + str(random.choice(number))
barcode = mainid + compid + strone # 把国家代码、企业代码和新生成的随机码进行组合
# 计算条形码的校验位
evensum = int(barcode[1]) + int(barcode[3]) + int(barcode[5]) + int(
barcode[7]) + int(barcode[9]) + int(barcode[11]) # 偶数位
oddsum = int(barcode[0]) + int(barcode[2]) + int(barcode[4]) + int(
barcode[6]) + int(barcode[8]) + int(barcode[10])
# checkbit=int(10-(evensum *3 + oddsum)%10)
checkbit = int((10 - (evensum * 3 + oddsum) % 10) % 10)
barcode = barcode + str(checkbit) # 组成完整的EAN13条形码的13位数字
print(barcode)
encoder = EAN13Encoder(barcode) # 调用EAN13Encoder生成条形码
encoder.save("barcode\\" + barcode + ".png") # 保存条形码信息图片到文件
def scode6(cmd):
'''条形码批量生成'''
mainid = input_box('请输入国家代码(3位):', 1, 0)
while int(mainid) < 1 or len(mainid) > 3:
'''当输入的国家代码小于1整数或者长度小于3时，重新输入'''
mainid = input_box('请输入国家代码:', 1, 0)
compid = input_box('请输入企业代码(４位):', 1, 0)
while int(compid) < 1 or len(compid) > 4:
'''当输入的企业代码小于1整数或者长度小于4时，重新输入'''
compid = input_box('请输入企业代码(４位):', 1, 0)
incount = input_box('请输入要生成条形码的数量:', 1, 0)
while int(incount) == 0:
'''输入生成条形码的数量为0时，重新输入'''
incount = input_box('请输入要生成条形码的数量:', 1, 0)
mkdir('barcode') #判断条形码的文件夹是否存在，如果不存在，则创建
for j in range(int(incount)):
strone = ''
for i in range(5):
strone += str(random.choice(number))
barcode = mainid + compid + strone #把国家代码，机器码，随机生成的代码进行组合
#极端条形码的校检位
evensum = int(barcode[1]) + int(barcode[3]) + int(barcode[5]) + int(
barcode[7]) + int(barcode[9]) + int(barcode[11])
oddsm = int(barcode[2]) + int(barcode[4]) + int(barcode[6]) + int(
barcode[8]) + int(barcode[10])
checkbit = int(10 - ((evensum * 3 + oddsm) % 10) % 10)
barcode += str(checkbit) #组成完整的13位条形码
encoder = EAN13Encoder(barcode) #调用EAN13模块生成条形码
encoder.save('barcode\\' + barcode + '.png')
def generate_code7(choice):
"""
生成条形码
:param choice:
:return:
"""
main_id = input_box("请输入EN13的国家代码（3位）", 1, 0)
while int(main_id) < 1 or len(main_id) != 3:
main_id = input_box("请输入EN13的国家代码（3位）", 1, 0)
com_id = input_box("请输入企业代码（4位）", 1, 0)
while int(com_id) < 1 or len(com_id) != 4:
com_id = input_box("请输入企业代码（4位）", 1, 0)
in_count = input_box("请输入要生成的条形码数量：", 1, 0)
while int(in_count) == 0:
in_count = input_box("请输入要生成的条形码数量：", 1, 0)
mkdir("barcode")
for i in range(int(in_count)):
str_one = ''
for j in range(5):
str_one = str_one + str(random.choice(number))
barcode = main_id + com_id + str_one
# 计算条形码的校验位
even_sum = int(barcode[1]) + int(barcode[3]) + int(barcode[5]) + int(
barcode[7]) + int(barcode[9]) + int(barcode[11])
odd_sum = int(barcode[0]) + int(barcode[2]) + int(barcode[4]) + int(
barcode[6]) + int(barcode[8]) + int(barcode[10])
check_bit = int((10 - (even_sum * 3 + odd_sum) % 10) % 10)
barcode = barcode + str(check_bit)
encoder = EAN13Encoder(barcode)
encoder.save("barcode\\" + barcode + ".png")
def test_against_generated(self):
"""Compare the output of this library with generated barcodes"""
for index, string in enumerate(EAN13Test.test_strings):
encoder = EAN13Encoder(string)
encoder.save('test.png')
import filecmp
self.assertTrue(
filecmp.cmp('test.png',
'pystrich/ean13/test_img/%d.png' % (index + 1)))
def create_barcode(self):
"""生产条形码"""
code_name = "".join([
STORAGE_CONFIG["BARCODE"]["ADDR"],
STORAGE_CONFIG["BARCODE"]["COM"], self.code
])
encoder = EAN13Encoder(code_name)
file_path = "".join(
[STORAGE_CONFIG["BARCODE"]["PATH"], code_name, ".png"])
encoder.save(file_path)
return file_path
def scode7(choice):
codes = []
country_id = input_box(
"\033[1;32m Please enter the 3-digit country id: \33[0m", 1, 0)
while len(country_id) != 3 or int(country_id) < 1:
country_id = input_box(
"\033[1;32m Please enter the 3-digit country id: \33[0m", 1, 0)
company_id = input_box(
"\033[1;32m Please enter the 4-digit company id: \33[0m", 1, 0)
while len(company_id) != 4 or int(country_id) < 1:
company_id = input_box(
"\033[1;32m Please enter the 4-digit company id: \33[0m", 1, 0)
count = input_box(
"\033[1;32m Please enter the number of codes you want to generate: \33[0m",
1, 0)
while count == "0":
count = input_box(
"\033[1;32m Please enter the number of codes you want to generate: \33[0m",
1, 0)
mkdir("barcode")
while len(codes) != int(count):
code = country_id + company_id
part = ""
for i in range(5):
part = part + random.choice(number)
code = code + part
# calc the last digit of code
even_sum = int(code[1]) + int(code[3]) + int(code[5]) + int(
code[7]) + int(code[9]) + int(code[11])
odd_sum = int(code[0]) + int(code[2]) + int(code[4]) + int(
code[6]) + int(code[8]) + int(code[10])
check_bit = (even_sum * 3 + odd_sum) % 10
check_bit = (10 - check_bit) % 10
code = code + str(check_bit)
if code not in codes:
codes.append(code)
# generate barcode
for code in codes:
encoder = EAN13Encoder(code)
encoder.save("barcode\\" + code + ".jpg")
def get_barcode_image(code, codetype='ean13'):
from PIL import Image
from io import BytesIO
from pystrich.code128 import Code128Encoder
from pystrich.ean13 import EAN13Encoder
from pystrich.code39 import Code39Encoder
codermap = {
'code128': lambda code: Code128Encoder(code, options={'height': 100}),
'ean13': lambda code: EAN13Encoder(code),
'code39': lambda code: Code39Encoder(code, options={'height': 100}),
}
codetype = codetype.lower()
if codetype not in codermap:
import warnings
warnings.warn('unsupported barcode type "%s"' % (codetype))
else:
encoder = codermap[codetype](code)
img = Image.open(BytesIO(encoder.get_imagedata(4)))
return img
def scode7(schoice):
mainid = inputbox("\033[1;32m 请输入EN13的国家代码（3位）：\033[0m", 1, 0)
while int(mainid) < 1 or len(mainid) != 3:
mainid = inputbox("\033[1;32m 请输入EN13的国家代码（3位）：\033[0m", 1, 0)
compid = inputbox("\033[1;32m 请输入EN13的企业代码（4位）：\033[0m", 1, 0)
while int(compid) < 1 or len(compid) != 4:
compid = inputbox("\033[1;32m 请输入EN13的企业代码（4位）：\033[0m", 1, 0)
incount = inputbox("\033[1;32m 请输入您要生成的条形码数量：\33[0m", 1, 0)
mkdir("barcode")
for j in range(int(incount)):
strone = ""
for i in range(5):
strone = strone + str(random.choice(number))
barcode = mainid + compid + strone
evensum = sum(range(1, 12, 2))
oddsum = sum(range(0, 12, 2))
checkbit = int((10 - (evensum * 3 + oddsum) % 10) % 10)
barcode = barcode + str(checkbit)
encoder = EAN13Encoder(barcode)
encoder.save("barcode\\" + barcode + ".png")
def test_check_digit(self):
"""Make sure the check digit calculation works"""
# test includes the full range of check digits
check_digits = {
"012345678901": 2,
"007567816412": 5,
"750103131130": 9,
"000000000000": 0,
"000000010101": 1,
"000000001111": 2,
"000000000111": 3,
"000000000101": 4,
"000000001011": 5,
"000000001001": 6,
"000000000001": 7,
"000000001010": 8,
"000000000010": 9
}
for code, check in check_digits.items():
enc = EAN13Encoder(code)
self.assertEqual(enc.check_digit, check)
def scode7(schoice):
mainid = inputbox('\033[1;32m 请输入EN13的国家代码（3位）：\033[0m', 1, 0)
while int(mainid) < 1 or len(mainid) != 3:
mainid = inputbox('\033[1;32m 请输入EN13的国家代码（3位）：\033[0m', 1, 0)
compid = inputbox('\033[1;32m 请输入企业代码（4位）：\033[0m', 1, 0)
while int(compid) < 1 or len(compid) != 4:
compid = inputbox('\033[1;32m 请输入EN13的企业代码（4位）：\033[0m', 1, 0)
incount = inputbox('\033[1;32m 请输入要生成的条形码数量：\033[0m', 1, 0)
while incount == 0:
incount = inputbox('\033[1;32m 请输入要生成的条形码数量：\033[0m', 1, 0)
mkdir('barcode')
for j in range(int(incount)):
strone = ''
for i in range(5):
strone = strone + str(random.choice(number))
barcode = mainid + compid + strone
evensum = int(barcode[1]) + int(barcode[3]) + int(barcode[5]) + int(barcode[7]) + int(barcode[9]) + int(
barcode[11])
oddsum = int(barcode[2]) + int(barcode[4]) + int(barcode[6]) + int(barcode[8]) + int(barcode[10])
checkbit = int(10 - ((evensum * 3 + oddsum) % 10) % 10)
barcode = barcode + str(checkbit)
encoder = EAN13Encoder(barcode)
encoder.save('barcode\\' + barcode + '.png')
def wfile(sstr, sfile, typeis, smsg, datapath,count):
"""
在特定的资料夹内将列表内的内容写入到对应的文件内，写入完成后后显示条形码的内容
并且在对话框中显示已完成
sstr: 含有条形码的列表
sfile: 待写入条形码的文件名
typeis: "":表示显示完成的对话框，"no": 不显示完成的对话框
smsg: 对话框提示的内容
datapath: 写入条形码对应的文件路径
count: 生成验证码的数量
"""
mkdir(datapath)
file = datapath + '/' + sfile
with open(file, 'a+') as f:
wrlist = sstr
pdata = ""
for i in range(len(wrlist)):
f.write(str(wrlist[i] + "\n"))
pdata += str(wrlist[i])
print("\033[1;31m" + pdata + "\033[0m"）
if typeis != "no":
tk.messagebox.showinfo("提示", smsg + str(len(wrlist)) + "\n 防伪码存放位置: " + filename)
root.withdraw()
def scompare(sstr,file):
"""
比较验证码是否有重复，无重复就返回该验证码，否则返回"0"
sstr: 验证码
file: 验证码保存文件的列表
"""
if os.path.exists(file):
with open(file, 'r') as f:
mark = True
for i in f:
if i == sstr:
mark = False
break
if mark == False:
return "0"
else:
return sstr
else:
return sstr
def scode1(schoice):
"""生成6位数防伪码"""
counter = 0
file = "scode" + schoice + ".txt"
in_count = inputbox("\033[1;31m 请输入需要生成6位验证码的数量: \033[0m", 1, 0)
while int(in_count) == 0:
in_count = inputbox("\033[1;31m 请输入需要生成6位验证码的数量: \033[0m", 1, 0)
randstr.clear()
while int(in_count) >= counter:
randfir = ""
for i in range(6):
randfir += random.choice(number)
if scompare(randfir, file) != "0":
randstr.append(randfir)
counter += 1
smsg = "已生成6位验证码共计: "
wfile(randstr, file, "", smsg, codepath)
def scode2(schoice):
"""生成9位防伪码，前三位为产品系列码."""
counter = 0
file = "scode" + schoice + ".txt"
smsg = "已生成的9位验证码数量为: "
code_start = inputbox("\033[1; 31m 请输入产品系列的数字起始码(3位): \033[0m", 1, 3)
while int(code_start) == 0:
code_start = inputbox("\033[1; 31m 请输入产品系列的数字起始码(3位): \033[0m", 1, 3)
in_count = inputbox("\033[1;31m 请输入需要生成9位验证码的数量: \033[0m", 1, 0)
while int(in_count) == 0:
in_count = inputbox("\033[1;31m 请输入需要生成9位验证码的数量: \033[0m", 1, 0)
randstr.clear()
while (int(in_count)) >= counter:
randfir = ''
for i in range(6):
randfir += random.choice(number)
randfir = code_start + randfir
if scompare(randfir, file) != "0"
counter += 1
randstr.append(randfir)
wfile(randstr, file, "", smsg, codepath)
def scode3(schoice):
"""生成25位字母数字组成的验证码"""
counter = 0
file = "scode" + schoice + ".txt"
smsg = "已生成的25位防伪码数量为: "
in_count = inputbox("\033[1;31m 请输入需要生成25位验证码的数量: \033[0m", 1, 0)
while int(in_count) == 0:
in_count = inputbox("\033[1;31m 请输入需要生成25位验证码的数量: \033[0m", 1, 0)
randstr.clear()
while int(in_count) >= counter:
randfir = ''
for i in range(25):
randfir += random.choice(letter)
randsec = randfir[0:5] + '-' + randfir[5:10] + '-' + randfir[10:15] + '-' + randfir[15:20] + '-' + randfir[20:25]
if scompare(randsec, file) != "0":
randstr.append(randsec)
counter += 1
wfile(randstr, file, "", smsg, codepath)
def scode4(schoice):
"""
生成12位智能数据验证码，其中3位为字母,字母位置随机
字母第一位:地区
字母第二位:颜色
字母第三位:级别
"""
counter = 0
in_type = inputbox("\033[1;31m 请输入3位数据分析验证码的值(ex:abc): \033[0m", 2, 3)
while len(in_type) != 3:
in_type = inputbox("\033[1;31m 请输入3位数据分析验证码的值(ex:abc): \033[0m", 2, 3)
in_count = inputbox("\033[1;31m 请输入需要生成12位智能数据验证码的数量: \033[0m", 1, 0)
while int(in_count) == 0:
in_count = inputbox("\033[1;31m 请输入需要生成12位智能数据验证码的数量: \033[0m", 1, 0)
ff_code(in_type, in_count)
ff_code(in_type, in_count, schoice):
"""
根据字母验证码及验证码的数量，生成12位的智能数据分析验证码
in_type: 验证码智能验证的值，共三位，第一位代表地区，第二位代表颜色，第三位代表产品级别，字母位置随机
in_count:验证码生成的数量
"""
counter = 0
file = 'scode' + schoice + ".txt"
smsg = "已生成的12为智能数据验证码的数量为: "
randstr.clear()
first = in_type[0].upper()
second = in_type[1].upper()
third = in_type[2].upper()
position = random.sample(number, 3)
while int(in_count) >= counter:
randfir = ''
for i in range(9):
randfir += random.choice(number)
randsec = randfir[0:int(position[0])] + first + randfir[int(position[0]):int(positon[1])] + second + randfir[int(position[1]):int(position[2])] + third + randfir[int(position[2]:9)]
if scompare(randsec, file) != "0":
randstr.append(randsec)
counter += 1
wfile(randstr, file, "", smsg, codepath)
def scode5(schoice):
default_file = r"/home/echo/learngit/collpull/mrsoft.mri"
file_path = tk.filedialog.askopenfile(filetypes=[("Text file", "*.mri")],title=u"请选择自动防伪码智能批处理文件: ", initialdir=(os.path.expanduser(default_file))
codelist = openfile(file_path)
for item in codelist:
itema = item.split()[0]
itemb = item.split()[1]
ff_code(itema, itemb, schoice="4")
def scode6(schoice):
"""
根据输入的国家代码，企业代码及数量生成EAN13条形码
"""
counter = 0
file = scode + schoice + ".txt"
smsg = "EAN13条形码生成的数量为: "
country_code = inputbox("请输入EAN13条形码的国家代码: ", 3, 3)
while country_code == "0":
country_code = inputbox("请输入EAN13条形码的国家代码: ", 3, 3)
corp_code = inputbox("请输入EAN13条形码的企业代码: ", 3, 4)
while corp_code == "0":
corp_code = inputbox("请输入EAN13条形码的企业代码: ", 3, 3)
quantity = inputbox("请输入生成EAN13条形码的数量: ", 1, 0)
while quantity == "0":
quantity = inputbox("请输入生成EAN13条形码的数量: ", 1, 0)
randstr.clear()
while quantity >= counter:
randfir = ""
for i in range(5):
randfir += random.choice(number)
randfir = country_code + corp_code + randfir
evennum = int(randfir[1]) + int(randfir[3]) + int(randfir[5]) + int(randfir[7]) + int(randfir[9]) + int(randfir[11])
oddnum = int(randfir[0]) + int(randfir[2]) + int(randfir[4]) + int(randfir[6]) + int(randfir[8]) + int(randfir[10])
checkbit = (10 - ((oddnum*3 + evennum)%10)%10)
randfir += str(checkbit)
if barcode_check(randfir, barcode) != "0":
bar_code = EAN13Encoder(randfir)
bar_code.save(barcode + '/' + 'randfir' + ".png")
def barcode_check(sstr, barcode):
mkdir(barcode)
mark = True
for root,dirs,files in os.walk(barcode):
filenames = files
for fname in filenames:
fname = fname.split('.')[0]
if fname == sstr:
mark = False
break
if mark == False:
return "0"
else:
return sstr
def scode7(schoice):
"""
生成qrcode,并保存到固定的路径.
"""
counter = 0
in_count = inputbox("请输入qrcode二维码的国家代码: ", 3, 3)
while in_count == "0":
in_count = inputbox("请输入qrcode二维码的国家代码: ", 3, 3)
mkdir(qrcode)
while int(in_count) >= counter:
strone = ''
for i in range(12):
strone += random.choice(number)
if barcode_check(strone, qrcode) != "0":
encoder = qrcode.make(strone)
encoder.save(qrcode + '/' + 'strone' + '.png')
def lottery():
file = r"lottery.ini"
file_path = tk.filedialog.askopenfilename(filetypes=[("Ini file", "*.ini")], title=u"请选择包含抽奖号码的文件: ", initialdir=(os.path.expanduser(file)))
codelist = openfile(file_path)
def menu():
"""
----------------------------------------------------------------------------------------------------
--------------------- 企业编码生成系统 ----------------------
|
| 1.生成6位数字防伪码(ex:213456)
| 2.生成9位系列产品数字防伪码(ex:23682392)
| 3.生成25位混合产品序列号(xxxxx-xxxxx-xxxxx-xxxxx-xxxxx)
| 4.生成含数据分析功能的防伪码(ex:234U23S999I2)
| 5.智能批量生成含数据分析功能的防伪码(ex:234U23S999I2)
| 6.EAN-13条形码批量生成
| 7.二维码批量输出
| 8.企业粉丝抽奖
| 0.退出系统
|---------------------------------------------------------------------------------------------------
"""
# -*-coding:utf-8-*-
# Author: Liu Jing
# Data: 2020 20:24
# File Name: test
# import qrcode
#
# encoder = qrcode.make('http://www.baidu.com')
# encoder.save('baidu.png')
# encoder.show()
import random
print(random.choice('12446578'))
from pystrich.ean13 import EAN13Encoder
encoder = EAN13Encoder('4655343452456')
encoder.save('4655343452456.png')
path = r"/home/echo/learngit/codepull/codeauto.mri"
root = tk.Tk()
file_path = tk.filedialog.askopenfilename(
filetypes=[("Text file", "*.mri")],
title=u"请选择要处理的文件",
initialdir=(os.path.expanduser(path)))
with open(file_path, 'r') as f:
file_list = f.read()
#file_list = openfile(file_path)
code_list = file_list.split("\n")
print(code_list)
s = "9301028183401"
encode = EAN13Encoder(s)
encode.save(s + ".png")
sstr = ['239232323.png', '282930232.png', '234923943.png']
file = r"/home/echo/test"
def filename_trans(sstr, file):
if not os.path.exists(file):
os.mkdir(file)
for root, dirs, files in os.walk(file):
flist = files
print(flist)
def main():
def test_encoding(self):
"""Make the the left and right encodings work"""
enc = EAN13Encoder("750103131130")
left, right = enc.encode()
self.assertEqual(left, "011000101001110011001010011101111010110011")
self.assertEqual(right, "100001011001101100110100001011100101110100")
def transfer(s):
encoder = EAN13Encoder(s)
encoder.save(s + ".jpg")
"""Generate test images for EAN13 barcode encoder"""
from pystrich.ean13 import EAN13Encoder
from pystrich.ean13.test_ean13 import EAN13Test
for index, string in enumerate(EAN13Test.test_strings):
enc = EAN13Encoder(string)
enc.save("pystrich/ean13/test_img/%d.png" % (index + 1))
"""Example code for ean13 library"""
__revision__ = "$Revision$"
from pystrich.ean13 import EAN13Encoder
import sys
import logging
logging.getLogger("ean13").setLevel(logging.DEBUG)
logging.getLogger("ean13").addHandler(logging.StreamHandler(sys.stdout))
if __name__ == "__main__":
encoder = EAN13Encoder(sys.argv[1])
encoder.save("test.png")
def test_parity(self):
"""Test the parity calculations"""
enc = EAN13Encoder("750103131130")
self.assertEqual(enc.get_parity(), (1, 0, 1, 0, 1, 0))