def createWidgets(self):
vlayout = QVBoxLayout()
lbl = QLabel(
"A column labeled 'ID' with unique increasing numbers for every row will be "\
"added to the output table automatically. In addition to this column it is also "\
"possible to copy one of the columns of the source table to the output table "\
"(tip: if a row identifying column is copied this can later be used for transferring "\
"more data from source table to the new table if necessary).")
lbl.setWordWrap(True);
vlayout.addWidget(lbl)
vlayout.addSpacing(20)
self._copyCheck = WidgetEnableCheckBox("Copy column from source table")
self.regProp("copy_column_enabled", WizProp(self._copyCheck, False))
vlayout.addWidget(self._copyCheck)
glayout = QGridLayout()
glayout.setColumnMinimumWidth(0, 20)
lbl = QLabel(
"The selected column of the source table will be added to the output table "\
"(possibly with a new name). For every object in the output table the value of "\
"its source object will be copied to this column.")
lbl.setWordWrap(True);
self._copyCheck.addWidget(lbl)
glayout.addWidget(lbl, 0, 1, 1, 3)
lbl = QLabel("Column in source table")
self._copyCheck.addWidget(lbl)
glayout.addWidget(lbl, 1, 1)
self._sourceCombo = QComboBox()
self.regProp("copy_column_in", WizProp(self._sourceCombo, ""))
self._copyCheck.addWidget(self._sourceCombo)
glayout.addWidget(self._sourceCombo, 1, 2)
lbl = QLabel("Column in output table")
self._copyCheck.addWidget(lbl)
glayout.addWidget(lbl, 2, 1)
self._outputEdit = QLineEdit()
self.regProp("copy_column_out", WizProp(self._outputEdit, ""))
self._copyCheck.addWidget(self._outputEdit)
glayout.addWidget(self._outputEdit, 2, 2)
vlayout.addLayout(glayout)
vlayout.addStretch(1)
self.setLayout(vlayout)
def createWidgets(self):
vlayout = QVBoxLayout()
glayout = QGridLayout()
glayout.setColumnStretch(3, 1)
glayout.addWidget(QLabel("Snap points closer than"), 0, 0)
self._snapEdit = QLineEdit()
self._snapEdit.setAlignment(Qt.AlignRight)
self.regProp("trim_snap", WizPropFloat(self._snapEdit, 1, 1))
glayout.addWidget(self._snapEdit, 0, 1)
glayout.addWidget(QLabel("meters"), 0, 2)
glayout.addWidget(QLabel("Remove tail segments shorter than"), 1, 0)
self._tailEdit = QLineEdit()
self._tailEdit.setAlignment(Qt.AlignRight)
self.regProp("trim_tail", WizPropFloat(self._tailEdit, 10, 1))
glayout.addWidget(self._tailEdit, 1, 1)
glayout.addWidget(QLabel("meters"), 1, 2)
glayout.addWidget(
QLabel("Merge segment-pairs with colinear deviation below"), 2, 0)
self._mergeEdit = QLineEdit()
self._mergeEdit.setAlignment(Qt.AlignRight)
self.regProp("trim_coldev", WizPropFloat(self._mergeEdit, 1, 1))
glayout.addWidget(self._mergeEdit, 2, 1)
glayout.addWidget(QLabel("meters"), 2, 2)
glayout.setRowMinimumHeight(3, 10)
vlayout.addLayout(glayout)
vlayout.addSpacing(10)
hlayout = QHBoxLayout()
btn = QPushButton("Restore default values")
btn.clicked.connect(self.resetProps)
hlayout.addWidget(btn)
hlayout.addStretch(1)
vlayout.addLayout(hlayout)
vlayout.addStretch(1)
self.setLayout(vlayout)
def createWidgets(self):
vlayout = QVBoxLayout()
widget = QCheckBox("Calculate number of reached lines")
vlayout.addWidget(widget)
self.regProp("calc_count", WizProp(widget, True))
vlayout.addSpacing(5)
widget = QCheckBox("Calculate total length of reached lines")
vlayout.addWidget(widget)
self.regProp("calc_length", WizProp(widget, True))
vlayout.addSpacing(5)
area_unit_combo = QComboBox()
for item in [('square meter', 'm2'), ('square kilometer', 'km2'),
('hectare', 'ha')]:
area_unit_combo.addItem(item[0], item[1])
hlayout = QHBoxLayout()
hlayout.addSpacing(20)
unit_label = QLabel("Area unit")
hlayout.addWidget(unit_label)
hlayout.addWidget(area_unit_combo)
hlayout.addStretch(1)
widget = WidgetEnableCheckBox("Calculate reached area",
[unit_label, area_unit_combo])
vlayout.addWidget(widget)
vlayout.addLayout(hlayout)
self.regProp("calc_area", WizProp(widget, True))
self.regProp("area_unit", WizPropCombo(area_unit_combo, 'm2'))
vlayout.addStretch(1)
self.setLayout(vlayout)
class ModelerParameterDefinitionDialog(QDialog):
PARAMETER_NUMBER = 'Number'
PARAMETER_RASTER = 'Raster Layer'
PARAMETER_TABLE = 'Vector Layer'
PARAMETER_VECTOR = 'Feature Source'
PARAMETER_STRING = 'String'
PARAMETER_EXPRESSION = 'Expression'
PARAMETER_BOOLEAN = 'Boolean'
PARAMETER_TABLE_FIELD = 'Layer Field'
PARAMETER_EXTENT = 'Extent'
PARAMETER_FILE = 'File'
PARAMETER_POINT = 'Point'
PARAMETER_CRS = 'CRS'
PARAMETER_MULTIPLE = 'Multiple Input'
PARAMETER_BAND = 'Raster Band'
PARAMETER_MAP_LAYER = 'Map Layer'
paramTypes = [
PARAMETER_BOOLEAN, PARAMETER_EXTENT, PARAMETER_FILE, PARAMETER_NUMBER,
PARAMETER_RASTER, PARAMETER_STRING, PARAMETER_EXPRESSION,
PARAMETER_MAP_LAYER, PARAMETER_TABLE, PARAMETER_TABLE_FIELD,
PARAMETER_VECTOR, PARAMETER_POINT, PARAMETER_CRS, PARAMETER_MULTIPLE,
PARAMETER_BAND
]
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(
settings.value(
"/Processing/modelParametersDefinitionDialogGeometry",
QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.
tr('Default field name, or ; separated list of field names for multiple field parameters'
))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
in (ModelerParameterDefinitionDialog.PARAMETER_VECTOR,
ModelerParameterDefinitionDialog.PARAMETER_TABLE)
or isinstance(self.param, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'),
QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'),
QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'),
QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'),
QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'),
QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(
self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'),
QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(
self.tr('Vector (No Geometry Required)'),
QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'),
QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'),
QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'),
QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'),
QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'),
QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(
self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_NUMBER
or isinstance(self.param, QgsProcessingParameterNumber)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType(
) == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(1 if self.param.behavior(
) == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(
QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(
not self.param.flags()
& QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def accept(self):
description = str(self.nameTextBox.text())
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN
or isinstance(self.param, QgsProcessingParameterBoolean)):
self.param = QgsProcessingParameterBoolean(name, description,
self.state.isChecked())
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD
or isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(
name,
description,
defaultValue=default,
parentLayerParameterName=parent,
type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BAND
or isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None,
parent)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_MAP_LAYER
or isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(name, description)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_RASTER
or isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(name, description)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_TABLE
or isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_VECTOR
or isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description, self.datatypeCombo.currentData())
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_NUMBER
or isinstance(self.param, QgsProcessingParameterNumber)):
try:
self.param = QgsProcessingParameterNumber(
name, description, QgsProcessingParameterNumber.Double,
self.defaultTextBox.text())
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterExpression(
name, description, str(self.defaultEdit.expression()), parent)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.param = QgsProcessingParameterString(
name, description, str(self.defaultTextBox.text()))
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXTENT
or isinstance(self.param, QgsProcessingParameterExtent)):
self.param = QgsProcessingParameterExtent(name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = QgsProcessingParameterFile(
name, description, QgsProcessingParameterFile.Folder
if isFolder else QgsProcessingParameterFile.File)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.param = QgsProcessingParameterPoint(
name, description, str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.param = QgsProcessingParameterCrs(
name, description,
self.selector.crs().authid())
if not self.requiredCheck.isChecked():
self.param.setFlags(
self.param.flags()
| QgsProcessingParameterDefinition.FlagOptional)
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.reject(self)
class ModelerParameterDefinitionDialog(QDialog):
PARAMETER_NUMBER = 'Number'
PARAMETER_RASTER = 'Raster layer'
PARAMETER_TABLE = 'Table'
PARAMETER_VECTOR = 'Vector layer'
PARAMETER_STRING = 'String'
PARAMETER_EXPRESSION = 'Expression'
PARAMETER_BOOLEAN = 'Boolean'
PARAMETER_TABLE_FIELD = 'Table field'
PARAMETER_EXTENT = 'Extent'
PARAMETER_FILE = 'File'
PARAMETER_POINT = 'Point'
PARAMETER_CRS = 'CRS'
PARAMETER_MULTIPLE = 'Multiple input'
paramTypes = [
PARAMETER_BOOLEAN,
PARAMETER_EXTENT,
PARAMETER_FILE,
PARAMETER_NUMBER,
PARAMETER_RASTER,
PARAMETER_STRING,
PARAMETER_EXPRESSION,
PARAMETER_TABLE,
PARAMETER_TABLE_FIELD,
PARAMETER_VECTOR,
PARAMETER_POINT,
PARAMETER_CRS,
PARAMETER_MULTIPLE
]
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
def setupUi(self):
self.setWindowTitle(self.tr('Parameter definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or \
isinstance(self.param, ParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.value))
self.verticalLayout.addWidget(self.state)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or \
isinstance(self.param, ParameterTableField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.inputs.values()):
if isinstance(param.param, (ParameterVector, ParameterTable)):
self.parentCombo.addItem(param.param.description(), param.param.name())
if self.param is not None:
if self.param.parent == param.param.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.datatype is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.datatype + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.multiple)
self.verticalLayout.addWidget(self.multipleCheck)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_VECTOR or
isinstance(self.param, ParameterVector)):
self.verticalLayout.addWidget(QLabel(self.tr('Shape type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Any'))
self.shapetypeCombo.addItem(self.tr('Point'))
self.shapetypeCombo.addItem(self.tr('Line'))
self.shapetypeCombo.addItem(self.tr('Polygon'))
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.param.datatype[0] + 1)
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, ParameterMultipleInput)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Vector (any)'))
self.datatypeCombo.addItem(self.tr('Vector (point)'))
self.datatypeCombo.addItem(self.tr('Vector (line)'))
self.datatypeCombo.addItem(self.tr('Vector (polygon)'))
self.datatypeCombo.addItem(self.tr('Raster'))
self.datatypeCombo.addItem(self.tr('File'))
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.param.datatype + 1)
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, ParameterNumber)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.min))
self.maxTextBox.setText(str(self.param.max))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.default
if self.param.isInteger:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, ParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.inputs.values()):
if isinstance(param.param, (ParameterVector, ParameterTable)):
self.parentCombo.addItem(param.param.description(), param.param.name())
if self.param is not None:
if self.param.parent_layer == param.param.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, ParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, ParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.isFolder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, ParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, ParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.flags() & QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel |
QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.okPressed)
self.buttonBox.rejected.connect(self.cancelPressed)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def okPressed(self):
description = str(self.nameTextBox.text())
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while name in self.alg.inputs:
name = safeName.lower() + str(i)
else:
name = self.param.name()
if (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or
isinstance(self.param, ParameterBoolean)):
self.param = ParameterBoolean(name, description, self.state.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or
isinstance(self.param, ParameterTableField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
self.param = ParameterTableField(name, description, parent, datatype, multiple=self.multipleCheck.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_RASTER or
isinstance(self.param, ParameterRaster)):
self.param = ParameterRaster(
name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE or
isinstance(self.param, ParameterTable)):
self.param = ParameterTable(
name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_VECTOR or
isinstance(self.param, ParameterVector)):
self.param = ParameterVector(
name, description,
[self.shapetypeCombo.currentIndex() - 1])
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, ParameterMultipleInput)):
self.param = ParameterMultipleInput(
name, description,
self.datatypeCombo.currentIndex() - 1)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, ParameterNumber)):
try:
vmin = self.minTextBox.text().strip()
if vmin == '':
vmin = None
else:
vmin = float(vmin)
vmax = self.maxTextBox.text().strip()
if vmax == '':
vmax = None
else:
vmax = float(vmax)
self.param = ParameterNumber(name, description, vmin, vmax,
str(self.defaultTextBox.text()))
except:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, ParameterExpression)):
parent = self.parentCombo.currentData()
self.param = ParameterExpression(name, description,
default=str(self.defaultEdit.expression()),
parent_layer=parent)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, ParameterString)):
self.param = ParameterString(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXTENT or
isinstance(self.param, ParameterExtent)):
self.param = ParameterExtent(name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, ParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = ParameterFile(name, description, isFolder=isFolder)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, ParameterPoint)):
self.param = ParameterPoint(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, ParameterCrs)):
self.param = ParameterCrs(name, description, default=self.selector.crs().authid())
if not self.requiredCheck.isChecked():
self.param.setFlags(self.param.flags() | QgsProcessingParameterDefinition.FlagOptional)
self.close()
def cancelPressed(self):
self.param = None
self.close()
class ModelerParameterDefinitionDialog(QDialog):
PARAMETER_NUMBER = 'Number'
PARAMETER_RASTER = 'Raster layer'
PARAMETER_TABLE = 'Table'
PARAMETER_VECTOR = 'Vector layer'
PARAMETER_STRING = 'String'
PARAMETER_EXPRESSION = 'Expression'
PARAMETER_BOOLEAN = 'Boolean'
PARAMETER_TABLE_FIELD = 'Table field'
PARAMETER_EXTENT = 'Extent'
PARAMETER_FILE = 'File'
PARAMETER_POINT = 'Point'
PARAMETER_CRS = 'CRS'
PARAMETER_MULTIPLE = 'Multiple input'
paramTypes = [
PARAMETER_BOOLEAN, PARAMETER_EXTENT, PARAMETER_FILE, PARAMETER_NUMBER,
PARAMETER_RASTER, PARAMETER_STRING, PARAMETER_EXPRESSION,
PARAMETER_TABLE, PARAMETER_TABLE_FIELD, PARAMETER_VECTOR,
PARAMETER_POINT, PARAMETER_CRS, PARAMETER_MULTIPLE
]
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
def setupUi(self):
self.setWindowTitle(self.tr('Parameter definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, Parameter):
self.nameTextBox.setText(self.param.description)
if self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or \
isinstance(self.param, ParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.value))
self.verticalLayout.addWidget(self.state)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or \
isinstance(self.param, ParameterTableField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.inputs.values()):
if isinstance(param.param, (ParameterVector, ParameterTable)):
self.parentCombo.addItem(param.param.description,
param.param.name)
if self.param is not None:
if self.param.parent == param.param.name:
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.datatype is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.datatype + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.multiple)
self.verticalLayout.addWidget(self.multipleCheck)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_VECTOR
or isinstance(self.param, ParameterVector)):
self.verticalLayout.addWidget(QLabel(self.tr('Shape type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Any'))
self.shapetypeCombo.addItem(self.tr('Point'))
self.shapetypeCombo.addItem(self.tr('Line'))
self.shapetypeCombo.addItem(self.tr('Polygon'))
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.param.datatype[0] + 1)
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE
or isinstance(self.param, ParameterMultipleInput)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Vector (any)'))
self.datatypeCombo.addItem(self.tr('Vector (point)'))
self.datatypeCombo.addItem(self.tr('Vector (line)'))
self.datatypeCombo.addItem(self.tr('Vector (polygon)'))
self.datatypeCombo.addItem(self.tr('Raster'))
self.datatypeCombo.addItem(self.tr('File'))
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.param.datatype + 1)
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_NUMBER
or isinstance(self.param, ParameterNumber)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.min))
self.maxTextBox.setText(str(self.param.max))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.default
if self.param.isInteger:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION
or isinstance(self.param, ParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.default)
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.inputs.values()):
if isinstance(param.param, (ParameterVector, ParameterTable)):
self.parentCombo.addItem(param.param.description,
param.param.name)
if self.param is not None:
if self.param.parent_layer == param.param.name:
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_STRING
or isinstance(self.param, ParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.default)
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE
or isinstance(self.param, ParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.isFolder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_POINT
or isinstance(self.param, ParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.default)
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS
or isinstance(self.param, ParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(
QgsCoordinateReferenceSystem(self.param.default))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.optional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.okPressed)
self.buttonBox.rejected.connect(self.cancelPressed)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def okPressed(self):
description = str(self.nameTextBox.text())
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while name in self.alg.inputs:
name = safeName.lower() + str(i)
else:
name = self.param.name
if (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN
or isinstance(self.param, ParameterBoolean)):
self.param = ParameterBoolean(name, description,
self.state.isChecked())
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD
or isinstance(self.param, ParameterTableField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
self.param = ParameterTableField(
name,
description,
parent,
datatype,
multiple=self.multipleCheck.isChecked())
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_RASTER
or isinstance(self.param, ParameterRaster)):
self.param = ParameterRaster(name, description)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_TABLE
or isinstance(self.param, ParameterTable)):
self.param = ParameterTable(name, description)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_VECTOR
or isinstance(self.param, ParameterVector)):
self.param = ParameterVector(
name, description, [self.shapetypeCombo.currentIndex() - 1])
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE
or isinstance(self.param, ParameterMultipleInput)):
self.param = ParameterMultipleInput(
name, description,
self.datatypeCombo.currentIndex() - 1)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_NUMBER
or isinstance(self.param, ParameterNumber)):
try:
vmin = self.minTextBox.text().strip()
if vmin == '':
vmin = None
else:
vmin = float(vmin)
vmax = self.maxTextBox.text().strip()
if vmax == '':
vmax = None
else:
vmax = float(vmax)
self.param = ParameterNumber(name, description, vmin, vmax,
str(self.defaultTextBox.text()))
except:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION
or isinstance(self.param, ParameterExpression)):
parent = self.parentCombo.currentData()
self.param = ParameterExpression(
name,
description,
default=str(self.defaultEdit.expression()),
parent_layer=parent)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_STRING
or isinstance(self.param, ParameterString)):
self.param = ParameterString(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_EXTENT
or isinstance(self.param, ParameterExtent)):
self.param = ParameterExtent(name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE
or isinstance(self.param, ParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = ParameterFile(name, description, isFolder=isFolder)
elif (self.paramType
== ModelerParameterDefinitionDialog.PARAMETER_POINT
or isinstance(self.param, ParameterPoint)):
self.param = ParameterPoint(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS
or isinstance(self.param, ParameterCrs)):
self.param = ParameterCrs(name,
description,
default=self.selector.crs().authid())
self.param.optional = not self.requiredCheck.isChecked()
self.close()
def cancelPressed(self):
self.param = None
self.close()
class ModelerParameterDefinitionDialog(QDialog):
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(
settings.value(
"/Processing/modelParametersDefinitionDialogGeometry",
QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == parameters.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == parameters.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.
tr('Default field name, or ; separated list of field names for multiple field parameters'
))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == parameters.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
in (parameters.PARAMETER_VECTOR, parameters.PARAMETER_TABLE)
or isinstance(self.param, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'),
QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'),
QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'),
QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'),
QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'),
QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(
self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == parameters.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'),
QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(
self.tr('Vector (No Geometry Required)'),
QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'),
QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'),
QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'),
QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'),
QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'),
QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(
self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == parameters.PARAMETER_NUMBER
or self.paramType == parameters.PARAMETER_DISTANCE
or isinstance(self.param, (QgsProcessingParameterNumber,
QgsProcessingParameterDistance))):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType(
) == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == parameters.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(1 if self.param.behavior(
) == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == parameters.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(
QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
elif self.paramType == parameters.PARAMETER_ENUM or \
isinstance(self.param, QgsProcessingParameterEnum):
self.widget = EnumModelerWidget(self)
if self.param is not None:
self.widget.setAllowMultiple(bool(self.param.allowMultiple()))
self.widget.setOptions(self.param.options())
self.widget.setDefault(self.param.defaultValue())
self.verticalLayout.addWidget(self.widget)
elif self.paramType == parameters.PARAMETER_MATRIX or \
isinstance(self.param, QgsProcessingParameterMatrix):
self.widget = MatrixModelerWidget(self)
if self.param is not None:
self.widget.setValue(self.param.headers(),
self.param.defaultValue())
self.widget.setFixedRows(self.param.hasFixedNumberRows())
self.verticalLayout.addWidget(self.widget)
elif isinstance(self.param, QgsProcessingDestinationParameter):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultWidget = DestinationSelectionPanel(
self.param, self.alg, default_selection=True)
self.verticalLayout.addWidget(self.defaultWidget)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(
not self.param.flags()
& QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
# If child algorithm output is mandatory, disable checkbox
if isinstance(self.param, QgsProcessingDestinationParameter):
provider_name, child_name, output_name = self.param.name().split(
':')
child = self.alg.childAlgorithms()['{}:{}'.format(
provider_name, child_name)]
model_output = child.modelOutput(output_name)
param_def = child.algorithm().parameterDefinition(
model_output.childOutputName())
if not (param_def.flags()
& QgsProcessingParameterDefinition.FlagOptional):
self.requiredCheck.setEnabled(False)
self.requiredCheck.setChecked(True)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def accept(self):
description = self.nameTextBox.text()
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType == parameters.PARAMETER_BOOLEAN
or isinstance(self.param, QgsProcessingParameterBoolean)):
self.param = QgsProcessingParameterBoolean(name, description,
self.state.isChecked())
elif (self.paramType == parameters.PARAMETER_TABLE_FIELD
or isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(
name,
description,
defaultValue=default,
parentLayerParameterName=parent,
type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == parameters.PARAMETER_BAND
or isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None,
parent)
elif (self.paramType == parameters.PARAMETER_MAP_LAYER
or isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(name, description)
elif (self.paramType == parameters.PARAMETER_RASTER
or isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(name, description)
elif (self.paramType == parameters.PARAMETER_TABLE
or isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_VECTOR
or isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description, self.datatypeCombo.currentData())
elif (self.paramType == parameters.PARAMETER_NUMBER or isinstance(
self.param,
(QgsProcessingParameterNumber, QgsProcessingParameterDistance))):
try:
self.param = QgsProcessingParameterNumber(
name, description, QgsProcessingParameterNumber.Double,
self.defaultTextBox.text())
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType == parameters.PARAMETER_EXPRESSION
or isinstance(self.param, QgsProcessingParameterExpression)):
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterExpression(
name, description, str(self.defaultEdit.expression()), parent)
elif (self.paramType == parameters.PARAMETER_STRING
or isinstance(self.param, QgsProcessingParameterString)):
self.param = QgsProcessingParameterString(
name, description, str(self.defaultTextBox.text()))
elif (self.paramType == parameters.PARAMETER_EXTENT
or isinstance(self.param, QgsProcessingParameterExtent)):
self.param = QgsProcessingParameterExtent(name, description)
elif (self.paramType == parameters.PARAMETER_FILE
or isinstance(self.param, QgsProcessingParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = QgsProcessingParameterFile(
name, description, QgsProcessingParameterFile.Folder
if isFolder else QgsProcessingParameterFile.File)
elif (self.paramType == parameters.PARAMETER_POINT
or isinstance(self.param, QgsProcessingParameterPoint)):
self.param = QgsProcessingParameterPoint(
name, description, str(self.defaultTextBox.text()))
elif (self.paramType == parameters.PARAMETER_CRS
or isinstance(self.param, QgsProcessingParameterCrs)):
self.param = QgsProcessingParameterCrs(
name, description,
self.selector.crs().authid())
elif (self.paramType == parameters.PARAMETER_ENUM
or isinstance(self.param, QgsProcessingParameterEnum)):
self.param = QgsProcessingParameterEnum(
name, description, self.widget.options(),
self.widget.allowMultiple(), self.widget.defaultOptions())
elif (self.paramType == parameters.PARAMETER_MATRIX
or isinstance(self.param, QgsProcessingParameterMatrix)):
self.param = QgsProcessingParameterMatrix(
name,
description,
hasFixedNumberRows=self.widget.fixedRows(),
headers=self.widget.headers(),
defaultValue=self.widget.value())
# Destination parameter
elif (isinstance(self.param, QgsProcessingParameterFeatureSink)):
self.param = QgsProcessingParameterFeatureSink(
name=name,
description=self.param.description(),
type=self.param.dataType(),
defaultValue=self.defaultWidget.getValue())
elif (isinstance(self.param, QgsProcessingParameterFileDestination)):
self.param = QgsProcessingParameterFileDestination(
name=name,
description=self.param.description(),
fileFilter=self.param.fileFilter(),
defaultValue=self.defaultWidget.getValue())
elif (isinstance(self.param, QgsProcessingParameterFolderDestination)):
self.param = QgsProcessingParameterFolderDestination(
name=name,
description=self.param.description(),
defaultValue=self.defaultWidget.getValue())
elif (isinstance(self.param, QgsProcessingParameterRasterDestination)):
self.param = QgsProcessingParameterRasterDestination(
name=name,
description=self.param.description(),
defaultValue=self.defaultWidget.getValue())
elif (isinstance(self.param, QgsProcessingParameterVectorDestination)):
self.param = QgsProcessingParameterVectorDestination(
name=name,
description=self.param.description(),
type=self.param.dataType(),
defaultValue=self.defaultWidget.getValue())
else:
if self.paramType:
typeId = self.paramType
else:
typeId = self.param.type()
paramTypeDef = QgsApplication.instance().processingRegistry(
).parameterType(typeId)
if not paramTypeDef:
msg = self.tr(
'The parameter `{}` is not registered, are you missing a required plugin?'
.format(typeId))
raise UndefinedParameterException(msg)
self.param = paramTypeDef.create(name)
self.param.setDescription(description)
self.param.setMetadata(paramTypeDef.metadata())
if not self.requiredCheck.isChecked():
self.param.setFlags(
self.param.flags()
| QgsProcessingParameterDefinition.FlagOptional)
else:
self.param.setFlags(
self.param.flags()
& ~QgsProcessingParameterDefinition.FlagOptional)
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.reject(self)
class ModelerParameterDefinitionDialog(QDialog):
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(settings.value("/Processing/modelParametersDefinitionDialogGeometry", QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == parameters.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == parameters.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.tr('Default field name, or ; separated list of field names for multiple field parameters'))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == parameters.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType in (
parameters.PARAMETER_VECTOR, parameters.PARAMETER_TABLE) or
isinstance(self.param, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'), QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'), QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'), QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'), QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'), QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == parameters.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'), QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(self.tr('Vector (No Geometry Required)'), QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'), QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'), QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'), QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'), QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'), QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == parameters.PARAMETER_NUMBER or self.paramType == parameters.PARAMETER_DISTANCE or
isinstance(self.param, (QgsProcessingParameterNumber, QgsProcessingParameterDistance))):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType() == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == parameters.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.behavior() == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == parameters.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == parameters.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
elif self.paramType == parameters.PARAMETER_ENUM or \
isinstance(self.param, QgsProcessingParameterEnum):
self.widget = EnumModelerWidget(self)
if self.param is not None:
self.widget.setAllowMultiple(bool(self.param.allowMultiple()))
self.widget.setOptions(self.param.options())
self.widget.setDefault(self.param.defaultValue())
self.verticalLayout.addWidget(self.widget)
elif self.paramType == parameters.PARAMETER_MATRIX or \
isinstance(self.param, QgsProcessingParameterMatrix):
self.widget = MatrixModelerWidget(self)
if self.param is not None:
self.widget.setValue(self.param.defaultValue())
self.widget.setHeaders(self.param.headers())
self.widget.setFixedRows(self.param.hasFixedNumberRows())
self.verticalLayout.addWidget(self.widget)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.flags() & QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel |
QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def accept(self):
description = self.nameTextBox.text()
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType == parameters.PARAMETER_BOOLEAN or
isinstance(self.param, QgsProcessingParameterBoolean)):
self.param = QgsProcessingParameterBoolean(name, description, self.state.isChecked())
elif (self.paramType == parameters.PARAMETER_TABLE_FIELD or
isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(name, description, defaultValue=default,
parentLayerParameterName=parent, type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == parameters.PARAMETER_BAND or
isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None, parent)
elif (self.paramType == parameters.PARAMETER_MAP_LAYER or
isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(
name, description)
elif (self.paramType == parameters.PARAMETER_RASTER or
isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(
name, description)
elif (self.paramType == parameters.PARAMETER_TABLE or
isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description,
[self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_VECTOR or
isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description,
[self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description,
self.datatypeCombo.currentData())
elif (self.paramType == parameters.PARAMETER_NUMBER or
isinstance(self.param, (QgsProcessingParameterNumber, QgsProcessingParameterDistance))):
try:
self.param = QgsProcessingParameterNumber(name, description, QgsProcessingParameterNumber.Double,
self.defaultTextBox.text())
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType == parameters.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterExpression(name, description,
str(self.defaultEdit.expression()),
parent)
elif (self.paramType == parameters.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.param = QgsProcessingParameterString(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == parameters.PARAMETER_EXTENT or
isinstance(self.param, QgsProcessingParameterExtent)):
self.param = QgsProcessingParameterExtent(name, description)
elif (self.paramType == parameters.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = QgsProcessingParameterFile(name, description,
QgsProcessingParameterFile.Folder if isFolder else QgsProcessingParameterFile.File)
elif (self.paramType == parameters.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.param = QgsProcessingParameterPoint(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == parameters.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.param = QgsProcessingParameterCrs(name, description, self.selector.crs().authid())
elif (self.paramType == parameters.PARAMETER_ENUM or
isinstance(self.param, QgsProcessingParameterEnum)):
self.param = QgsProcessingParameterEnum(name, description, self.widget.options(), self.widget.allowMultiple(), self.widget.defaultOptions())
elif (self.paramType == parameters.PARAMETER_MATRIX or
isinstance(self.param, QgsProcessingParameterMatrix)):
self.param = QgsProcessingParameterMatrix(name, description, hasFixedNumberRows=self.widget.fixedRows(), headers=self.widget.headers(), defaultValue=self.widget.value())
else:
if self.paramType:
typeId = self.paramType
else:
typeId = self.param.type()
paramTypeDef = QgsApplication.instance().processingRegistry().parameterType(typeId)
if not paramTypeDef:
msg = self.tr('The parameter `{}` is not registered, are you missing a required plugin?'.format(typeId))
raise UndefinedParameterException(msg)
self.param = paramTypeDef.create(name)
self.param.setDescription(description)
self.param.setMetadata(paramTypeDef.metadata())
if not self.requiredCheck.isChecked():
self.param.setFlags(self.param.flags() | QgsProcessingParameterDefinition.FlagOptional)
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
QDialog.reject(self)
class ModelerParameterDefinitionDialog(QDialog):
@staticmethod
def use_legacy_dialog(param=None, paramType=None):
if isinstance(param, QgsProcessingDestinationParameter):
return True
# yay, use new API!
return False
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(
settings.value(
"/Processing/modelParametersDefinitionDialogGeometry",
QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def switchToCommentTab(self):
self.tab.setCurrentIndex(1)
self.commentEdit.setFocus()
self.commentEdit.selectAll()
def setupUi(self):
type_metadata = QgsApplication.processingRegistry().parameterType(
self.param.type() if self.param else self.paramType)
self.setWindowTitle(
self.tr('{} Parameter Definition').format(type_metadata.name()))
self.mainLayout = QVBoxLayout()
self.tab = QTabWidget()
self.mainLayout.addWidget(self.tab)
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout()
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if isinstance(self.param, QgsProcessingDestinationParameter):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultWidget = QgsProcessingLayerOutputDestinationWidget(
self.param, defaultSelection=True)
self.verticalLayout.addWidget(self.defaultWidget)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(
not self.param.flags()
& QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.advancedCheck = QCheckBox()
self.advancedCheck.setText(self.tr('Advanced'))
self.advancedCheck.setChecked(False)
if self.param is not None:
self.advancedCheck.setChecked(
self.param.flags()
& QgsProcessingParameterDefinition.FlagAdvanced)
self.verticalLayout.addWidget(self.advancedCheck)
# If child algorithm output is mandatory, disable checkbox
if isinstance(self.param, QgsProcessingDestinationParameter):
child = self.alg.childAlgorithms()[self.param.metadata()
['_modelChildId']]
model_output = child.modelOutput(
self.param.metadata()['_modelChildOutputName'])
param_def = child.algorithm().parameterDefinition(
model_output.childOutputName())
if not (param_def.flags()
& QgsProcessingParameterDefinition.FlagOptional):
self.requiredCheck.setEnabled(False)
self.requiredCheck.setChecked(True)
self.advancedCheck.setEnabled(False)
self.advancedCheck.setChecked(False)
self.verticalLayout.addStretch()
w = QWidget()
w.setLayout(self.verticalLayout)
self.tab.addTab(w, self.tr('Properties'))
self.commentLayout = QVBoxLayout()
self.commentEdit = QTextEdit()
self.commentEdit.setAcceptRichText(False)
self.commentLayout.addWidget(self.commentEdit, 1)
hl = QHBoxLayout()
hl.setContentsMargins(0, 0, 0, 0)
hl.addWidget(QLabel(self.tr('Color')))
self.comment_color_button = QgsColorButton()
self.comment_color_button.setAllowOpacity(True)
self.comment_color_button.setWindowTitle(self.tr('Comment Color'))
self.comment_color_button.setShowNull(True, self.tr('Default'))
hl.addWidget(self.comment_color_button)
self.commentLayout.addLayout(hl)
w2 = QWidget()
w2.setLayout(self.commentLayout)
self.tab.addTab(w2, self.tr('Comments'))
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.mainLayout.addWidget(self.buttonBox)
self.setLayout(self.mainLayout)
def setComments(self, text):
self.commentEdit.setPlainText(text)
def comments(self):
return self.commentEdit.toPlainText()
def setCommentColor(self, color):
if color.isValid():
self.comment_color_button.setColor(color)
else:
self.comment_color_button.setToNull()
def commentColor(self):
return self.comment_color_button.color(
) if not self.comment_color_button.isNull() else QColor()
def accept(self):
description = self.nameTextBox.text()
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
# Destination parameter
if (isinstance(self.param, QgsProcessingParameterFeatureSink)):
self.param = QgsProcessingParameterFeatureSink(
name=name,
description=description,
type=self.param.dataType(),
defaultValue=self.defaultWidget.value())
elif (isinstance(self.param, QgsProcessingParameterFileDestination)):
self.param = QgsProcessingParameterFileDestination(
name=name,
description=description,
fileFilter=self.param.fileFilter(),
defaultValue=self.defaultWidget.value())
elif (isinstance(self.param, QgsProcessingParameterFolderDestination)):
self.param = QgsProcessingParameterFolderDestination(
name=name,
description=description,
defaultValue=self.defaultWidget.value())
elif (isinstance(self.param, QgsProcessingParameterRasterDestination)):
self.param = QgsProcessingParameterRasterDestination(
name=name,
description=description,
defaultValue=self.defaultWidget.value())
elif (isinstance(self.param, QgsProcessingParameterVectorDestination)):
self.param = QgsProcessingParameterVectorDestination(
name=name,
description=description,
type=self.param.dataType(),
defaultValue=self.defaultWidget.value())
else:
if self.paramType:
typeId = self.paramType
else:
typeId = self.param.type()
paramTypeDef = QgsApplication.instance().processingRegistry(
).parameterType(typeId)
if not paramTypeDef:
msg = self.tr(
'The parameter `{}` is not registered, are you missing a required plugin?'
.format(typeId))
raise UndefinedParameterException(msg)
self.param = paramTypeDef.create(name)
self.param.setDescription(description)
self.param.setMetadata(paramTypeDef.metadata())
if not self.requiredCheck.isChecked():
self.param.setFlags(
self.param.flags()
| QgsProcessingParameterDefinition.FlagOptional)
else:
self.param.setFlags(
self.param.flags()
& ~QgsProcessingParameterDefinition.FlagOptional)
if self.advancedCheck.isChecked():
self.param.setFlags(
self.param.flags()
| QgsProcessingParameterDefinition.FlagAdvanced)
else:
self.param.setFlags(
self.param.flags()
& ~QgsProcessingParameterDefinition.FlagAdvanced)
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.reject(self)
class ModelerParameterDefinitionDialog(QDialog):
PARAMETER_NUMBER = 'Number'
PARAMETER_RASTER = 'Raster Layer'
PARAMETER_TABLE = 'Vector Layer'
PARAMETER_VECTOR = 'Vector Features'
PARAMETER_STRING = 'String'
PARAMETER_EXPRESSION = 'Expression'
PARAMETER_BOOLEAN = 'Boolean'
PARAMETER_TABLE_FIELD = 'Vector Field'
PARAMETER_EXTENT = 'Extent'
PARAMETER_FILE = 'File'
PARAMETER_POINT = 'Point'
PARAMETER_CRS = 'CRS'
PARAMETER_MULTIPLE = 'Multiple Input'
PARAMETER_BAND = 'Raster Band'
PARAMETER_MAP_LAYER = 'Map Layer'
paramTypes = [
PARAMETER_BOOLEAN,
PARAMETER_EXTENT,
PARAMETER_FILE,
PARAMETER_NUMBER,
PARAMETER_RASTER,
PARAMETER_STRING,
PARAMETER_EXPRESSION,
PARAMETER_MAP_LAYER,
PARAMETER_TABLE,
PARAMETER_TABLE_FIELD,
PARAMETER_VECTOR,
PARAMETER_POINT,
PARAMETER_CRS,
PARAMETER_MULTIPLE,
PARAMETER_BAND
]
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(settings.value("/Processing/modelParametersDefinitionDialogGeometry", QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def setupUi(self):
self.setWindowTitle(self.tr('Parameter Definition'))
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout(self)
self.verticalLayout.setMargin(20)
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or \
isinstance(self.param, QgsProcessingParameterBoolean):
self.state = QCheckBox()
self.state.setText(self.tr('Checked'))
self.state.setChecked(False)
if self.param is not None:
self.state.setChecked(bool(self.param.defaultValue()))
self.verticalLayout.addWidget(self.state)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.tr('Default field name, or ; separated list of field names for multiple field parameters'))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType in (
ModelerParameterDefinitionDialog.PARAMETER_VECTOR, ModelerParameterDefinitionDialog.PARAMETER_TABLE) or
isinstance(self.param, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'), QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'), QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'), QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'), QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'), QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'), QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(self.tr('Vector (No Geometry Required)'), QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'), QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'), QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'), QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'), QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'), QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, QgsProcessingParameterNumber)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType() == QgsProcessingParameterNumber.Integer:
default = int(math.floor(default))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultEdit = QgsExpressionLineEdit()
if self.param is not None:
self.defaultEdit.setExpression(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultEdit)
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
self.parentCombo.addItem(self.tr("None"), None)
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource, QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(), definition.name())
if self.param is not None:
if self.param.parentLayerParameterName() == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
self.verticalLayout.addWidget(QLabel(self.tr('Type')))
self.fileFolderCombo = QComboBox()
self.fileFolderCombo.addItem(self.tr('File'))
self.fileFolderCombo.addItem(self.tr('Folder'))
if self.param is not None:
self.fileFolderCombo.setCurrentIndex(
1 if self.param.behavior() == QgsProcessingParameterFile.Folder else 0)
self.verticalLayout.addWidget(self.fileFolderCombo)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
if self.param is not None:
self.defaultTextBox.setText(self.param.defaultValue())
self.verticalLayout.addWidget(self.defaultTextBox)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.selector = QgsProjectionSelectionWidget()
if self.param is not None:
self.selector.setCrs(QgsCoordinateReferenceSystem(self.param.defaultValue()))
else:
self.selector.setCrs(QgsCoordinateReferenceSystem('EPSG:4326'))
self.verticalLayout.addWidget(self.selector)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(not self.param.flags() & QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel |
QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.verticalLayout.addStretch()
self.verticalLayout.addWidget(self.buttonBox)
self.setLayout(self.verticalLayout)
def accept(self):
description = str(self.nameTextBox.text())
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN or
isinstance(self.param, QgsProcessingParameterBoolean)):
self.param = QgsProcessingParameterBoolean(name, description, self.state.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD or
isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(name, description, defaultValue=default,
parentLayerParameterName=parent, type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_BAND or
isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None, parent)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MAP_LAYER or
isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(
name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_RASTER or
isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(
name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_TABLE or
isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description,
[self.shapetypeCombo.currentData()])
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_VECTOR or
isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description,
[self.shapetypeCombo.currentData()])
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE or
isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description,
self.datatypeCombo.currentData())
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_NUMBER or
isinstance(self.param, QgsProcessingParameterNumber)):
try:
self.param = QgsProcessingParameterNumber(name, description, QgsProcessingParameterNumber.Double,
self.defaultTextBox.text())
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION or
isinstance(self.param, QgsProcessingParameterExpression)):
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterExpression(name, description,
str(self.defaultEdit.expression()),
parent)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_STRING or
isinstance(self.param, QgsProcessingParameterString)):
self.param = QgsProcessingParameterString(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_EXTENT or
isinstance(self.param, QgsProcessingParameterExtent)):
self.param = QgsProcessingParameterExtent(name, description)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_FILE or
isinstance(self.param, QgsProcessingParameterFile)):
isFolder = self.fileFolderCombo.currentIndex() == 1
self.param = QgsProcessingParameterFile(name, description,
QgsProcessingParameterFile.Folder if isFolder else QgsProcessingParameterFile.File)
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_POINT or
isinstance(self.param, QgsProcessingParameterPoint)):
self.param = QgsProcessingParameterPoint(name, description,
str(self.defaultTextBox.text()))
elif (self.paramType == ModelerParameterDefinitionDialog.PARAMETER_CRS or
isinstance(self.param, QgsProcessingParameterCrs)):
self.param = QgsProcessingParameterCrs(name, description, self.selector.crs().authid())
if not self.requiredCheck.isChecked():
self.param.setFlags(self.param.flags() | QgsProcessingParameterDefinition.FlagOptional)
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue("/Processing/modelParametersDefinitionDialogGeometry", self.saveGeometry())
QDialog.reject(self)
@staticmethod
def inputTooltip(input_type):
tooltips = {
ModelerParameterDefinitionDialog.PARAMETER_NUMBER: QCoreApplication.translate('Processing', 'A numeric parameter, including float or integer values.'),
ModelerParameterDefinitionDialog.PARAMETER_RASTER: QCoreApplication.translate('Processing', 'A raster layer parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_TABLE: QCoreApplication.translate('Processing', 'A vector layer parameter, e.g. for algorithms which change layer styles, edit layers in place, or other operations which affect an entire layer.'),
ModelerParameterDefinitionDialog.PARAMETER_VECTOR: QCoreApplication.translate('Processing', 'A vector feature parameter, e.g. for algorithms which operate on the features within a layer.'),
ModelerParameterDefinitionDialog.PARAMETER_STRING: QCoreApplication.translate('Processing', 'A freeform string parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_EXPRESSION: QCoreApplication.translate('Processing', 'A QGIS expression parameter, which presents an expression builder widget to users.'),
ModelerParameterDefinitionDialog.PARAMETER_BOOLEAN: QCoreApplication.translate('Processing', 'A boolean parameter, for true/false values.'),
ModelerParameterDefinitionDialog.PARAMETER_TABLE_FIELD: QCoreApplication.translate('Processing', 'A vector field parameter, for selecting an existing field from a vector source.'),
ModelerParameterDefinitionDialog.PARAMETER_EXTENT: QCoreApplication.translate('Processing', 'A map extent parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_FILE: QCoreApplication.translate('Processing', 'A file parameter, for use with non-map layer file sources.'),
ModelerParameterDefinitionDialog.PARAMETER_POINT: QCoreApplication.translate('Processing', 'A geographic point parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_CRS: QCoreApplication.translate('Processing', 'A coordinate reference system (CRS) input parameter.'),
ModelerParameterDefinitionDialog.PARAMETER_MULTIPLE: QCoreApplication.translate('Processing', 'An input allowing selection of multiple sources, including multiple map layers or file sources.'),
ModelerParameterDefinitionDialog.PARAMETER_BAND: QCoreApplication.translate('Processing', 'A raster band parameter, for selecting an existing band from a raster source.'),
ModelerParameterDefinitionDialog.PARAMETER_MAP_LAYER: QCoreApplication.translate('Processing', 'A generic map layer parameter, which accepts either vector or raster layers.')
}
return tooltips[input_type]
class ModelerParameterDefinitionDialog(QDialog):
@staticmethod
def use_legacy_dialog(param=None, paramType=None):
if paramType in (parameters.PARAMETER_TABLE_FIELD,
parameters.PARAMETER_BAND,
parameters.PARAMETER_VECTOR,
parameters.PARAMETER_TABLE,
parameters.PARAMETER_MULTIPLE,
parameters.PARAMETER_NUMBER,
parameters.PARAMETER_DISTANCE,
parameters.PARAMETER_SCALE,
parameters.PARAMETER_MAP_LAYER):
return True
elif isinstance(
param,
(QgsProcessingParameterField, QgsProcessingParameterBand,
QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer,
QgsProcessingParameterMultipleLayers,
QgsProcessingParameterNumber, QgsProcessingParameterDistance,
QgsProcessingParameterScale, QgsProcessingParameterMapLayer,
QgsProcessingDestinationParameter)):
return True
# yay, use new API!
return False
def __init__(self, alg, paramType=None, param=None):
self.alg = alg
self.paramType = paramType
self.param = param
QDialog.__init__(self)
self.setModal(True)
self.setupUi()
settings = QgsSettings()
self.restoreGeometry(
settings.value(
"/Processing/modelParametersDefinitionDialogGeometry",
QByteArray()))
def closeEvent(self, event):
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
super(ModelerParameterDefinitionDialog, self).closeEvent(event)
def switchToCommentTab(self):
self.tab.setCurrentIndex(1)
self.commentEdit.setFocus()
self.commentEdit.selectAll()
def setupUi(self):
type_metadata = QgsApplication.processingRegistry().parameterType(
self.param.type() if self.param else self.paramType)
self.setWindowTitle(
self.tr('{} Parameter Definition').format(type_metadata.name()))
self.mainLayout = QVBoxLayout()
self.tab = QTabWidget()
self.mainLayout.addWidget(self.tab)
self.setMinimumWidth(300)
self.verticalLayout = QVBoxLayout()
self.label = QLabel(self.tr('Parameter name'))
self.verticalLayout.addWidget(self.label)
self.nameTextBox = QLineEdit()
self.verticalLayout.addWidget(self.nameTextBox)
if isinstance(self.param, QgsProcessingParameterDefinition):
self.nameTextBox.setText(self.param.description())
if self.paramType == parameters.PARAMETER_TABLE_FIELD or \
isinstance(self.param, QgsProcessingParameterField):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
# add the datatype selector
self.verticalLayout.addWidget(QLabel(self.tr('Allowed data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any'), -1)
self.datatypeCombo.addItem(self.tr('Number'), 0)
self.datatypeCombo.addItem(self.tr('String'), 1)
self.datatypeCombo.addItem(self.tr('Date/time'), 2)
self.verticalLayout.addWidget(self.datatypeCombo)
if self.param is not None and self.param.dataType() is not None:
# QComboBoxes indexes start at 0,
# self.param.datatype start with -1 that is why I need to do +1
datatypeIndex = self.param.dataType() + 1
self.datatypeCombo.setCurrentIndex(datatypeIndex)
self.multipleCheck = QCheckBox()
self.multipleCheck.setText(self.tr('Accept multiple fields'))
self.multipleCheck.setChecked(False)
if self.param is not None:
self.multipleCheck.setChecked(self.param.allowMultiple())
self.verticalLayout.addWidget(self.multipleCheck)
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setToolTip(
self.
tr('Default field name, or ; separated list of field names for multiple field parameters'
))
if self.param is not None:
default = self.param.defaultValue()
if default is not None:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif self.paramType == parameters.PARAMETER_BAND or \
isinstance(self.param, QgsProcessingParameterBand):
self.verticalLayout.addWidget(QLabel(self.tr('Parent layer')))
self.parentCombo = QComboBox()
idx = 0
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition, (QgsProcessingParameterRasterLayer)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentLayerParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType
in (parameters.PARAMETER_VECTOR, parameters.PARAMETER_TABLE)
or isinstance(self.param, (QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer))):
self.verticalLayout.addWidget(QLabel(self.tr('Geometry type')))
self.shapetypeCombo = QComboBox()
self.shapetypeCombo.addItem(self.tr('Geometry Not Required'),
QgsProcessing.TypeVector)
self.shapetypeCombo.addItem(self.tr('Point'),
QgsProcessing.TypeVectorPoint)
self.shapetypeCombo.addItem(self.tr('Line'),
QgsProcessing.TypeVectorLine)
self.shapetypeCombo.addItem(self.tr('Polygon'),
QgsProcessing.TypeVectorPolygon)
self.shapetypeCombo.addItem(self.tr('Any Geometry Type'),
QgsProcessing.TypeVectorAnyGeometry)
if self.param is not None:
self.shapetypeCombo.setCurrentIndex(
self.shapetypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.shapetypeCombo)
elif (self.paramType == parameters.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'),
QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(
self.tr('Vector (No Geometry Required)'),
QgsProcessing.TypeVector)
self.datatypeCombo.addItem(self.tr('Vector (Point)'),
QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'),
QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'),
QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'),
QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'),
QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('File'), QgsProcessing.TypeFile)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(
self.datatypeCombo.findData(self.param.layerType()))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType == parameters.PARAMETER_MAP_LAYER
or isinstance(self.param, QgsProcessingParameterMapLayer)):
self.verticalLayout.addWidget(QLabel(self.tr('Data type')))
self.datatypeCombo = QComboBox()
self.datatypeCombo.addItem(self.tr('Any Map Layer'),
QgsProcessing.TypeMapLayer)
self.datatypeCombo.addItem(self.tr('Vector (Point)'),
QgsProcessing.TypeVectorPoint)
self.datatypeCombo.addItem(self.tr('Vector (Line)'),
QgsProcessing.TypeVectorLine)
self.datatypeCombo.addItem(self.tr('Vector (Polygon)'),
QgsProcessing.TypeVectorPolygon)
self.datatypeCombo.addItem(self.tr('Vector (Any Geometry Type)'),
QgsProcessing.TypeVectorAnyGeometry)
self.datatypeCombo.addItem(self.tr('Raster'),
QgsProcessing.TypeRaster)
self.datatypeCombo.addItem(self.tr('Mesh'), QgsProcessing.TypeMesh)
if self.param is not None:
self.datatypeCombo.setCurrentIndex(
self.datatypeCombo.findData(self.param.dataTypes()[0]))
self.verticalLayout.addWidget(self.datatypeCombo)
elif (self.paramType
in (parameters.PARAMETER_NUMBER, parameters.PARAMETER_DISTANCE,
parameters.PARAMETER_SCALE)
or isinstance(self.param, (QgsProcessingParameterNumber,
QgsProcessingParameterDistance,
QgsProcessingParameterScale))):
if (self.paramType == parameters.PARAMETER_DISTANCE
or isinstance(self.param, QgsProcessingParameterDistance)):
self.verticalLayout.addWidget(QLabel(self.tr('Linked input')))
self.parentCombo = QComboBox()
self.parentCombo.addItem('', '')
idx = 1
for param in list(self.alg.parameterComponents().values()):
definition = self.alg.parameterDefinition(
param.parameterName())
if isinstance(definition,
(QgsProcessingParameterFeatureSource,
QgsProcessingParameterVectorLayer,
QgsProcessingParameterMapLayer,
QgsProcessingParameterCrs)):
self.parentCombo.addItem(definition.description(),
definition.name())
if self.param is not None:
if self.param.parentParameterName(
) == definition.name():
self.parentCombo.setCurrentIndex(idx)
idx += 1
self.verticalLayout.addWidget(self.parentCombo)
elif (self.paramType != parameters.PARAMETER_SCALE
and not isinstance(self.param, QgsProcessingParameterScale)):
self.verticalLayout.addWidget(QLabel(self.tr('Number type')))
self.type_combo = QComboBox()
self.type_combo.addItem(self.tr('Float'),
QgsProcessingParameterNumber.Double)
self.type_combo.addItem(self.tr('Integer'),
QgsProcessingParameterNumber.Integer)
if self.param:
self.type_combo.setCurrentIndex(
self.type_combo.findData(self.param.dataType()))
self.verticalLayout.addWidget(self.type_combo)
if (self.paramType != parameters.PARAMETER_SCALE and
not isinstance(self.param, QgsProcessingParameterScale)):
self.verticalLayout.addWidget(QLabel(self.tr('Min value')))
self.minTextBox = QLineEdit()
self.verticalLayout.addWidget(self.minTextBox)
self.verticalLayout.addWidget(QLabel(self.tr('Max value')))
self.maxTextBox = QLineEdit()
self.verticalLayout.addWidget(self.maxTextBox)
if self.param is not None:
self.minTextBox.setText(str(self.param.minimum()))
self.maxTextBox.setText(str(self.param.maximum()))
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultTextBox = QLineEdit()
self.defaultTextBox.setText(self.tr('0'))
if self.param is not None:
default = self.param.defaultValue()
if self.param.dataType(
) == QgsProcessingParameterNumber.Integer:
default = int(math.floor(float(default)))
if default:
self.defaultTextBox.setText(str(default))
self.verticalLayout.addWidget(self.defaultTextBox)
elif isinstance(self.param, QgsProcessingDestinationParameter):
self.verticalLayout.addWidget(QLabel(self.tr('Default value')))
self.defaultWidget = QgsProcessingLayerOutputDestinationWidget(
self.param, defaultSelection=True)
self.verticalLayout.addWidget(self.defaultWidget)
self.verticalLayout.addSpacing(20)
self.requiredCheck = QCheckBox()
self.requiredCheck.setText(self.tr('Mandatory'))
self.requiredCheck.setChecked(True)
if self.param is not None:
self.requiredCheck.setChecked(
not self.param.flags()
& QgsProcessingParameterDefinition.FlagOptional)
self.verticalLayout.addWidget(self.requiredCheck)
self.advancedCheck = QCheckBox()
self.advancedCheck.setText(self.tr('Advanced'))
self.advancedCheck.setChecked(False)
if self.param is not None:
self.advancedCheck.setChecked(
self.param.flags()
& QgsProcessingParameterDefinition.FlagAdvanced)
self.verticalLayout.addWidget(self.advancedCheck)
# If child algorithm output is mandatory, disable checkbox
if isinstance(self.param, QgsProcessingDestinationParameter):
provider_name, child_name, output_name = self.param.name().split(
':')
child = self.alg.childAlgorithms()['{}:{}'.format(
provider_name, child_name)]
model_output = child.modelOutput(output_name)
param_def = child.algorithm().parameterDefinition(
model_output.childOutputName())
if not (param_def.flags()
& QgsProcessingParameterDefinition.FlagOptional):
self.requiredCheck.setEnabled(False)
self.requiredCheck.setChecked(True)
self.advancedCheck.setEnabled(False)
self.advancedCheck.setChecked(False)
self.verticalLayout.addStretch()
w = QWidget()
w.setLayout(self.verticalLayout)
self.tab.addTab(w, self.tr('Properties'))
self.commentLayout = QVBoxLayout()
self.commentEdit = QTextEdit()
self.commentEdit.setAcceptRichText(False)
self.commentLayout.addWidget(self.commentEdit, 1)
hl = QHBoxLayout()
hl.setContentsMargins(0, 0, 0, 0)
hl.addWidget(QLabel(self.tr('Color')))
self.comment_color_button = QgsColorButton()
self.comment_color_button.setAllowOpacity(True)
self.comment_color_button.setWindowTitle(self.tr('Comment Color'))
self.comment_color_button.setShowNull(True, self.tr('Default'))
hl.addWidget(self.comment_color_button)
self.commentLayout.addLayout(hl)
w2 = QWidget()
w2.setLayout(self.commentLayout)
self.tab.addTab(w2, self.tr('Comments'))
self.buttonBox = QDialogButtonBox(self)
self.buttonBox.setOrientation(Qt.Horizontal)
self.buttonBox.setStandardButtons(QDialogButtonBox.Cancel
| QDialogButtonBox.Ok)
self.buttonBox.setObjectName('buttonBox')
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.mainLayout.addWidget(self.buttonBox)
self.setLayout(self.mainLayout)
def setComments(self, text):
self.commentEdit.setPlainText(text)
def comments(self):
return self.commentEdit.toPlainText()
def setCommentColor(self, color):
if color.isValid():
self.comment_color_button.setColor(color)
else:
self.comment_color_button.setToNull()
def commentColor(self):
return self.comment_color_button.color(
) if not self.comment_color_button.isNull() else QColor()
def accept(self):
description = self.nameTextBox.text()
if description.strip() == '':
QMessageBox.warning(self, self.tr('Unable to define parameter'),
self.tr('Invalid parameter name'))
return
if self.param is None:
validChars = \
'abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789'
safeName = ''.join(c for c in description if c in validChars)
name = safeName.lower()
i = 2
while self.alg.parameterDefinition(name):
name = safeName.lower() + str(i)
i += 1
else:
name = self.param.name()
if (self.paramType == parameters.PARAMETER_TABLE_FIELD
or isinstance(self.param, QgsProcessingParameterField)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
datatype = self.datatypeCombo.currentData()
default = self.defaultTextBox.text()
if not default:
default = None
self.param = QgsProcessingParameterField(
name,
description,
defaultValue=default,
parentLayerParameterName=parent,
type=datatype,
allowMultiple=self.multipleCheck.isChecked())
elif (self.paramType == parameters.PARAMETER_BAND
or isinstance(self.param, QgsProcessingParameterBand)):
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
self.param = QgsProcessingParameterBand(name, description, None,
parent)
elif (self.paramType == parameters.PARAMETER_MAP_LAYER
or isinstance(self.param, QgsProcessingParameterMapLayer)):
self.param = QgsProcessingParameterMapLayer(
name, description, types=[self.datatypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_RASTER
or isinstance(self.param, QgsProcessingParameterRasterLayer)):
self.param = QgsProcessingParameterRasterLayer(name, description)
elif (self.paramType == parameters.PARAMETER_TABLE
or isinstance(self.param, QgsProcessingParameterVectorLayer)):
self.param = QgsProcessingParameterVectorLayer(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_VECTOR
or isinstance(self.param, QgsProcessingParameterFeatureSource)):
self.param = QgsProcessingParameterFeatureSource(
name, description, [self.shapetypeCombo.currentData()])
elif (self.paramType == parameters.PARAMETER_MULTIPLE
or isinstance(self.param, QgsProcessingParameterMultipleLayers)):
self.param = QgsProcessingParameterMultipleLayers(
name, description, self.datatypeCombo.currentData())
elif (self.paramType == parameters.PARAMETER_DISTANCE
or isinstance(self.param, QgsProcessingParameterDistance)):
self.param = QgsProcessingParameterDistance(
name, description, self.defaultTextBox.text())
try:
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
if self.parentCombo.currentIndex() < 0:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
parent = self.parentCombo.currentData()
if parent:
self.param.setParentParameterName(parent)
elif (self.paramType == parameters.PARAMETER_SCALE
or isinstance(self.param, QgsProcessingParameterScale)):
self.param = QgsProcessingParameterScale(
name, description, self.defaultTextBox.text())
elif (self.paramType == parameters.PARAMETER_NUMBER
or isinstance(self.param, QgsProcessingParameterNumber)):
type = self.type_combo.currentData()
self.param = QgsProcessingParameterNumber(
name, description, type, self.defaultTextBox.text())
try:
vmin = self.minTextBox.text().strip()
if not vmin == '':
self.param.setMinimum(float(vmin))
vmax = self.maxTextBox.text().strip()
if not vmax == '':
self.param.setMaximum(float(vmax))
except:
QMessageBox.warning(
self, self.tr('Unable to define parameter'),
self.tr('Wrong or missing parameter values'))
return
# Destination parameter
elif (isinstance(self.param, QgsProcessingParameterFeatureSink)):
self.param = QgsProcessingParameterFeatureSink(
name=name,
description=self.param.description(),
type=self.param.dataType(),
defaultValue=self.defaultWidget.value())
elif (isinstance(self.param, QgsProcessingParameterFileDestination)):
self.param = QgsProcessingParameterFileDestination(
name=name,
description=self.param.description(),
fileFilter=self.param.fileFilter(),
defaultValue=self.defaultWidget.value())
elif (isinstance(self.param, QgsProcessingParameterFolderDestination)):
self.param = QgsProcessingParameterFolderDestination(
name=name,
description=self.param.description(),
defaultValue=self.defaultWidget.value())
elif (isinstance(self.param, QgsProcessingParameterRasterDestination)):
self.param = QgsProcessingParameterRasterDestination(
name=name,
description=self.param.description(),
defaultValue=self.defaultWidget.value())
elif (isinstance(self.param, QgsProcessingParameterVectorDestination)):
self.param = QgsProcessingParameterVectorDestination(
name=name,
description=self.param.description(),
type=self.param.dataType(),
defaultValue=self.defaultWidget.value())
else:
if self.paramType:
typeId = self.paramType
else:
typeId = self.param.type()
paramTypeDef = QgsApplication.instance().processingRegistry(
).parameterType(typeId)
if not paramTypeDef:
msg = self.tr(
'The parameter `{}` is not registered, are you missing a required plugin?'
.format(typeId))
raise UndefinedParameterException(msg)
self.param = paramTypeDef.create(name)
self.param.setDescription(description)
self.param.setMetadata(paramTypeDef.metadata())
if not self.requiredCheck.isChecked():
self.param.setFlags(
self.param.flags()
| QgsProcessingParameterDefinition.FlagOptional)
else:
self.param.setFlags(
self.param.flags()
& ~QgsProcessingParameterDefinition.FlagOptional)
if self.advancedCheck.isChecked():
self.param.setFlags(
self.param.flags()
| QgsProcessingParameterDefinition.FlagAdvanced)
else:
self.param.setFlags(
self.param.flags()
& ~QgsProcessingParameterDefinition.FlagAdvanced)
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.accept(self)
def reject(self):
self.param = None
settings = QgsSettings()
settings.setValue(
"/Processing/modelParametersDefinitionDialogGeometry",
self.saveGeometry())
QDialog.reject(self)
