def __init__(self, main):
self.searchThread = None
self.passPhraseFinder = None
self.isSearchOver = False
def updateResults(resultStr):
self.resultStr += resultStr
def updateDisplay():
if len(self.resultStr) > 0:
self.resultsDisplay.append(self.resultStr)
self.resultStr = ''
self.resultsDisplay.moveCursor(QtGui.QTextCursor.End)
self.resultsDisplay.repaint()
if self.isSearchOver:
endSearch()
# Call this from another thread to end the search
def terminateSearch():
self.isSearchOver = True
# Call this from the main thread to end the search
def endSearch():
self.main.extraHeartbeatAlways.remove(updateDisplay)
self.searchButton.setEnabled(True)
self.stopButton.setEnabled(False)
# If the thread is still searching tell the pass phrase finder to stop
if self.passPhraseFinder and self.searchThread and not self.searchThread.isFinished():
self.passPhraseFinder.isStopped = True
def searchForPassphrase():
# Get the selected wallet from the main screen
wlt = self.getSelectedWlt()
if wlt and not wlt.watchingOnly and wlt.isLocked:
self.resultStr = ''
self.passPhraseFinder = PassPhraseFinder(wlt)
self.resultsDisplay.setText(QString(''))
self.main.extraHeartbeatAlways.append(updateDisplay)
if len(self.segOrdStrSet) > 0:
# From self.segOrdStrList, create a list of lists of indexes that describe the segment orderings to search
# In other words convert all of the strings in orderings list to lists of integers
segOrdIntListList = []
for ordStr in self.segOrdStrSet:
# The indexes provided by the users are 1 based, and the list indexes ought to be 0 based
segOrdIntListList.append([int(indexStr)-1 for indexStr in ordStr.split(',')])
self.searchThread = PyBackgroundThread(self.passPhraseFinder.searchForPassPhrase,
[segDef.getSegList() for segDef in self.segDefList],
segOrdIntListList,
updateResults,
terminateSearch )
# Reset the isSearchOver flag
self.isSearchOver = False
self.searchThread.start()
# Disable search button adn enabled stop button
self.stopButton.setEnabled(True)
self.searchButton.setEnabled(False)
else:
QMessageBox.warning(self.main, tr('Invalid'), tr("""
There are no valid segment combinations to search.
Please add at least one segment and ordering to search."""), QMessageBox.Ok)
else:
QMessageBox.warning(self.main, tr('Invalid'), tr("""
No valid wallet is selected. Please select a locked
non-watching-only from Available Wallets."""), QMessageBox.Ok)
def addKnownSegment():
dlgEnterSegment = DlgEnterSegment(main, main)
if dlgEnterSegment.exec_():
segmentText = str(dlgEnterSegment.editSegment.text())
if len(segmentText)>0:
self.segDefList.append(KnownSeg(segmentText))
self.segDefTableModel.updateSegList(self.segDefList)
def addUnknownCaseSegment():
dlgEnterSegment = DlgEnterSegment(main, main)
if dlgEnterSegment.exec_():
segmentText = str(dlgEnterSegment.editSegment.text())
if len(segmentText)>0:
self.segDefList.append(UnknownCaseSeg(segmentText))
self.segDefTableModel.updateSegList(self.segDefList)
def addUnknownOrderSegment():
dlgEnterSegment = DlgEnterSegment(main, main, isUnknownOrder=True)
if dlgEnterSegment.exec_():
segmentText = str(dlgEnterSegment.editSegment.text())
minLen = int(str(dlgEnterSegment.minSelector.currentText()))
maxLen = int(str(dlgEnterSegment.maxSelector.currentText()))
if len(segmentText)>0:
self.segDefList.append(UnknownSeg(segmentText, minLen, maxLen))
self.segDefTableModel.updateSegList(self.segDefList)
def addOrdering():
if len(self.segDefList) > 0:
dlgSpecifyOrdering = DlgSpecifyOrdering(main, main, len(self.segDefList))
if dlgSpecifyOrdering.exec_():
self.segOrdStrSet.add(str(dlgSpecifyOrdering.parseOrderingList()).strip('[]'))
self.updateOrderingListBox()
else:
QMessageBox.warning(self.main, tr('Not Ready'), tr("""
No segments have been entered. You must enter some segments before you can order them."""), QMessageBox.Ok)
self.main = main
self.segDefList = []
self.segOrdStrSet = set()
segmentHeader = QRichLabel(tr("""<b>Build segments for pass phrase search: </b>"""), doWrap=False)
self.knownButton = QPushButton("Add Known Segment")
self.unknownCaseButton = QPushButton("Add Unknown Case Segment")
self.unknownOrderButton = QPushButton("Add Unknown Order Segment")
self.main.connect(self.knownButton, SIGNAL('clicked()'), addKnownSegment)
self.main.connect(self.unknownCaseButton, SIGNAL('clicked()'), addUnknownCaseSegment)
self.main.connect(self.unknownOrderButton, SIGNAL('clicked()'), addUnknownOrderSegment)
topRow = makeHorizFrame([segmentHeader, self.knownButton, self.unknownCaseButton, self.unknownOrderButton, 'stretch'])
self.segDefTableModel = SegDefDisplayModel()
self.segDefTableView = QTableView()
self.segDefTableView.setModel(self.segDefTableModel)
self.segDefTableView.setSelectionBehavior(QTableView.SelectRows)
self.segDefTableView.setSelectionMode(QTableView.SingleSelection)
self.segDefTableView.verticalHeader().setDefaultSectionSize(20)
self.segDefTableView.verticalHeader().hide()
h = tightSizeNChar(self.segDefTableView, 1)[1]
self.segDefTableView.setMinimumHeight(2 * (1.3 * h))
self.segDefTableView.setMaximumHeight(10 * (1.3 * h))
initialColResize(self.segDefTableView, [.1, .2, .4, .1, .1, .1])
self.segDefTableView.customContextMenuRequested.connect(self.showSegContextMenu)
self.segDefTableView.setContextMenuPolicy(Qt.CustomContextMenu)
segmentOrderingsHeader = QRichLabel(tr("""<b>Specify orderings for pass phrase search: </b>"""), doWrap=False)
self.addOrderingButton = QPushButton("Add Ordering")
self.main.connect(self.addOrderingButton, SIGNAL('clicked()'), addOrdering)
orderingButtonPanel = makeHorizFrame([segmentOrderingsHeader, self.addOrderingButton, 'stretch'])
self.segOrdListBox = QListWidget()
self.segOrdListBox.customContextMenuRequested.connect(self.showOrdContextMenu)
self.segOrdListBox.setContextMenuPolicy(Qt.CustomContextMenu)
self.searchButton = QPushButton("Search")
self.main.connect(self.searchButton, SIGNAL('clicked()'), searchForPassphrase)
self.stopButton = QPushButton("Stop Searching")
self.stopButton.setEnabled(False)
self.main.connect(self.stopButton, SIGNAL('clicked()'), endSearch)
totalSearchLabel = QRichLabel(tr("""<b>Total Passphrase Tries To Search: </b>"""), doWrap=False)
self.totalSearchTriesDisplay = QLineEdit()
self.totalSearchTriesDisplay.setReadOnly(True)
self.totalSearchTriesDisplay.setText(QString('0'))
self.totalSearchTriesDisplay.setFont(GETFONT('Fixed'))
self.totalSearchTriesDisplay.setMinimumWidth(tightSizeNChar(self.totalSearchTriesDisplay, 6)[0])
self.totalSearchTriesDisplay.setMaximumWidth(tightSizeNChar(self.totalSearchTriesDisplay, 12)[0])
searchButtonPanel = makeHorizFrame([self.searchButton, self.stopButton, 'stretch', totalSearchLabel, self.totalSearchTriesDisplay])
self.resultsDisplay = QTextEdit()
self.resultsDisplay.setReadOnly(True)
self.resultsDisplay.setFont(GETFONT('Fixed'))
self.resultsDisplay.setMinimumHeight(100)
self.searchPanel = makeVertFrame([topRow, self.segDefTableView, orderingButtonPanel,
self.segOrdListBox, searchButtonPanel, self.resultsDisplay, 'stretch'])
# Now set the scrollarea widget to the layout
self.tabToDisplay = QScrollArea()
self.tabToDisplay.setWidgetResizable(True)
self.tabToDisplay.setWidget(self.searchPanel)
def __init__(self, main):
def updateDustLimit():
try:
self.dustTableModel.updateDustList(
self.getSelectedWlt(), str2coin(self.dustLimitText.text()))
self.beGoneDustButton.setEnabled(
len(self.dustTableModel.dustTxOutlist) > 0)
if self.dustTableModel.wlt:
self.lblHeader.setText(
tr("""<b>Dust Outputs for Wallet: %s</b>""" %
self.dustTableModel.wlt.labelName))
except NegativeValueError:
pass
except TooMuchPrecisionError:
pass
except:
LOGEXCEPT("Unexpected exception")
pass
def sendDust():
try:
utxiList = []
for utxo in self.dustTableModel.dustTxOutlist:
# The PyCreateAndSignTx method require PyTx and PyBtcAddress objects
rawTx = TheBDM.getTxByHash(utxo.getTxHash()).serialize()
a160 = CheckHash160(utxo.getRecipientScrAddr())
for pyAddr in self.dustTableModel.wlt.addrMap.values():
if a160 == pyAddr.getAddr160():
pubKey = pyAddr.binPublicKey65.toBinStr()
txoIdx = utxo.getTxOutIndex()
utxiList.append(
UnsignedTxInput(rawTx, txoIdx, None, pubKey))
break
# Make copies, destroy them in the finally clause
privKeyMap = {}
for addrObj in self.dustTableModel.wlt.addrMap.values():
scrAddr = SCRADDR_P2PKH_BYTE + addrObj.getAddr160()
if self.dustTableModel.wlt.useEncryption and self.dustTableModel.wlt.isLocked:
# Target wallet is encrypted...
unlockdlg = DlgUnlockWallet(self.dustTableModel.wlt,
self.main, self.main,
'Unlock Wallet to Import')
if not unlockdlg.exec_():
QMessageBox.critical(self, 'Wallet is Locked', \
'Cannot send dust without unlocking the wallet!', \
QMessageBox.Ok)
return
privKeyMap[scrAddr] = addrObj.binPrivKey32_Plain.copy()
signedTx = PyCreateAndSignTx(
utxiList, [], privKeyMap,
SIGHASH_NONE | SIGHASH_ANYONECANPAY)
print "-------------"
print binary_to_hex(signedTx.serialize())
# sock = socket.create_connection(('dust-b-gone.bitcoin.petertodd.org',80))
# sock.send(signedTx.serialize())
# sock.send(b'\n')
# sock.close()
except socket.error as err:
QMessageBox.critical(
self.main, tr('Negative Value'),
tr("""
Failed to connect to dust-b-gone server: %s""" % err.strerror),
QMessageBox.Ok)
except NegativeValueError:
QMessageBox.critical(
self.main, tr('Negative Value'),
tr("""
You must enter a positive value of at least 0.0000 0001
and less than %s for the dust limit.""" % MAX_DUST_LIMIT_STR),
QMessageBox.Ok)
except TooMuchPrecisionError:
QMessageBox.critical(
self.main.main, tr('Too much precision'),
tr("""
Bitcoins can only be specified down to 8 decimal places.
The smallest unit of a Bitcoin is 0.0000 0001 BTC.
Please enter a dust limit of at least 0.0000 0001 and less than %s."""
% MAX_DUST_LIMIT_STR), QMessageBox.Ok)
finally:
for scraddr in privKeyMap:
privKeyMap[scraddr].destroy()
self.main = main
self.lblHeader = QRichLabel(
tr("""<b>Dust Outputs for Wallet: None Selected</b>"""),
doWrap=False)
self.beGoneDustButton = QPushButton("Remove Dust")
self.beGoneDustButton.setEnabled(False)
self.main.connect(self.beGoneDustButton, SIGNAL('clicked()'), sendDust)
topRow = makeHorizFrame([self.lblHeader, 'stretch'])
secondRow = makeHorizFrame([self.beGoneDustButton, 'stretch'])
self.dustLimitLabel = QLabel("Max Dust Value (BTC): ")
self.dustLimitText = QLineEdit()
self.dustLimitText.setFont(GETFONT('Fixed'))
self.dustLimitText.setMinimumWidth(
tightSizeNChar(self.dustLimitText, 6)[0])
self.dustLimitText.setMaximumWidth(
tightSizeNChar(self.dustLimitText, 12)[0])
self.dustLimitText.setAlignment(Qt.AlignRight)
self.dustLimitText.setText(coin2str(DEFAULT_DUST_LIMIT))
self.main.connect(self.dustLimitText, SIGNAL('textChanged(QString)'),
updateDustLimit)
limitPanel = makeHorizFrame(
[self.dustLimitLabel, self.dustLimitText, 'stretch'])
self.dustTableModel = DustDisplayModel()
self.dustTableView = QTableView()
self.dustTableView.setModel(self.dustTableModel)
self.dustTableView.setSelectionMode(QTableView.NoSelection)
self.dustTableView.verticalHeader().setDefaultSectionSize(20)
self.dustTableView.verticalHeader().hide()
h = tightSizeNChar(self.dustTableView, 1)[1]
self.dustTableView.setMinimumHeight(2 * (1.3 * h))
self.dustTableView.setMaximumHeight(10 * (1.3 * h))
initialColResize(self.dustTableView, [100, .7, .3])
self.dustTableView.setContextMenuPolicy(Qt.CustomContextMenu)
self.lblTxioInfo = QRichLabel('')
self.lblTxioInfo.setMinimumWidth(
tightSizeNChar(self.lblTxioInfo, 30)[0])
self.main.connect(self.main.walletsView,
SIGNAL('clicked(QModelIndex)'), updateDustLimit)
self.dustBGoneFrame = makeVertFrame(
[topRow, secondRow, limitPanel, self.dustTableView, 'stretch'])
# Now set the scrollarea widget to the layout
self.tabToDisplay = QScrollArea()
self.tabToDisplay.setWidgetResizable(True)
self.tabToDisplay.setWidget(self.dustBGoneFrame)
def __init__(self, main):
def updateDustLimit():
try:
self.dustTableModel.updateDustList(self.getSelectedWlt(),
str2coin(self.dustLimitText.text()))
self.beGoneDustButton.setEnabled(len(self.dustTableModel.dustTxOutlist)>0)
if self.dustTableModel.wlt:
self.lblHeader.setText(tr("""<b>Dust Outputs for Wallet: %s</b>"""
% self.dustTableModel.wlt.labelName))
except NegativeValueError:
pass
except TooMuchPrecisionError:
pass
except:
LOGEXCEPT("Unexpected exception")
pass
def sendDust():
try:
utxiList = []
for utxo in self.dustTableModel.dustTxOutlist:
# The PyCreateAndSignTx method require PyTx and PyBtcAddress objects
rawTx = TheBDM.getTxByHash(utxo.getTxHash()).serialize()
a160 = CheckHash160(utxo.getRecipientScrAddr())
for pyAddr in self.dustTableModel.wlt.addrMap.values():
if a160 == pyAddr.getAddr160():
pubKey = pyAddr.binPublicKey65.toBinStr()
txoIdx = utxo.getTxOutIndex()
utxiList.append(UnsignedTxInput(rawTx, txoIdx, None, pubKey))
break
# Make copies, destroy them in the finally clause
privKeyMap = {}
for addrObj in self.dustTableModel.wlt.addrMap.values():
scrAddr = SCRADDR_P2PKH_BYTE + addrObj.getAddr160()
if self.dustTableModel.wlt.useEncryption and self.dustTableModel.wlt.isLocked:
# Target wallet is encrypted...
unlockdlg = DlgUnlockWallet(self.dustTableModel.wlt,
self.main, self.main, 'Unlock Wallet to Import')
if not unlockdlg.exec_():
QMessageBox.critical(self, 'Wallet is Locked', \
'Cannot send dust without unlocking the wallet!', \
QMessageBox.Ok)
return
privKeyMap[scrAddr] = addrObj.binPrivKey32_Plain.copy()
signedTx = PyCreateAndSignTx(utxiList,
[],
privKeyMap, SIGHASH_NONE|SIGHASH_ANYONECANPAY )
print "-------------"
print binary_to_hex(signedTx.serialize())
# sock = socket.create_connection(('dust-b-gone.bitcoin.petertodd.org',80))
# sock.send(signedTx.serialize())
# sock.send(b'\n')
# sock.close()
except socket.error as err:
QMessageBox.critical(self.main, tr('Negative Value'), tr("""
Failed to connect to dust-b-gone server: %s""" % err.strerror), QMessageBox.Ok)
except NegativeValueError:
QMessageBox.critical(self.main, tr('Negative Value'), tr("""
You must enter a positive value of at least 0.0000 0001
and less than %s for the dust limit.""" % MAX_DUST_LIMIT_STR), QMessageBox.Ok)
except TooMuchPrecisionError:
QMessageBox.critical(self.main.main, tr('Too much precision'), tr("""
Bitcoins can only be specified down to 8 decimal places.
The smallest unit of a Groestlcoin is 0.0000 0001 GRS.
Please enter a dust limit of at least 0.0000 0001 and less than %s.""" % MAX_DUST_LIMIT_STR), QMessageBox.Ok)
finally:
for scraddr in privKeyMap:
privKeyMap[scraddr].destroy()
self.main = main
self.lblHeader = QRichLabel(tr("""<b>Dust Outputs for Wallet: None Selected</b>"""), doWrap=False)
self.beGoneDustButton = QPushButton("Remove Dust")
self.beGoneDustButton.setEnabled(False)
self.main.connect(self.beGoneDustButton, SIGNAL('clicked()'), sendDust)
topRow = makeHorizFrame([self.lblHeader,'stretch'])
secondRow = makeHorizFrame([self.beGoneDustButton, 'stretch'])
self.dustLimitLabel = QLabel("Max Dust Value (GRS): ")
self.dustLimitText = QLineEdit()
self.dustLimitText.setFont(GETFONT('Fixed'))
self.dustLimitText.setMinimumWidth(tightSizeNChar(self.dustLimitText, 6)[0])
self.dustLimitText.setMaximumWidth(tightSizeNChar(self.dustLimitText, 12)[0])
self.dustLimitText.setAlignment(Qt.AlignRight)
self.dustLimitText.setText(coin2str(DEFAULT_DUST_LIMIT))
self.main.connect(self.dustLimitText, SIGNAL('textChanged(QString)'), updateDustLimit)
limitPanel = makeHorizFrame([self.dustLimitLabel, self.dustLimitText, 'stretch'])
self.dustTableModel = DustDisplayModel()
self.dustTableView = QTableView()
self.dustTableView.setModel(self.dustTableModel)
self.dustTableView.setSelectionMode(QTableView.NoSelection)
self.dustTableView.verticalHeader().setDefaultSectionSize(20)
self.dustTableView.verticalHeader().hide()
h = tightSizeNChar(self.dustTableView, 1)[1]
self.dustTableView.setMinimumHeight(2 * (1.3 * h))
self.dustTableView.setMaximumHeight(10 * (1.3 * h))
initialColResize(self.dustTableView, [100, .7, .3])
self.dustTableView.setContextMenuPolicy(Qt.CustomContextMenu)
self.lblTxioInfo = QRichLabel('')
self.lblTxioInfo.setMinimumWidth(tightSizeNChar(self.lblTxioInfo, 30)[0])
self.main.connect(self.main.walletsView, SIGNAL('clicked(QModelIndex)'),
updateDustLimit)
self.dustBGoneFrame = makeVertFrame([topRow, secondRow, limitPanel, self.dustTableView, 'stretch'])
# Now set the scrollarea widget to the layout
self.tabToDisplay = QScrollArea()
self.tabToDisplay.setWidgetResizable(True)
self.tabToDisplay.setWidget(self.dustBGoneFrame)