def setupUi(self, MainWindow):
MainWindow.setObjectName(_fromUtf8("MainWindow"))
MainWindow.resize(1155, 853)
self.centralwidget = QWidget(MainWindow)
self.centralwidget.setObjectName(_fromUtf8("centralwidget"))
self.verticalLayout = QVBoxLayout(self.centralwidget)
self.verticalLayout.setObjectName(_fromUtf8("verticalLayout"))
self.tabWidget = QTabWidget(self.centralwidget)
self.tabWidget.setObjectName(_fromUtf8("tabWidget"))
self.tab = QWidget()
self.tab.setObjectName(_fromUtf8("tab"))
self.tabWidget.addTab(self.tab, _fromUtf8(""))
self.tab_2 = QWidget()
self.tab_2.setObjectName(_fromUtf8("tab_2"))
self.tabWidget.addTab(self.tab_2, _fromUtf8(""))
self.verticalLayout.addWidget(self.tabWidget)
MainWindow.setCentralWidget(self.centralwidget)
self.menubar = QMenuBar(MainWindow)
self.menubar.setGeometry(QRect(0, 0, 1155, 20))
self.menubar.setObjectName(_fromUtf8("menubar"))
MainWindow.setMenuBar(self.menubar)
self.statusbar = QStatusBar(MainWindow)
self.statusbar.setObjectName(_fromUtf8("statusbar"))
MainWindow.setStatusBar(self.statusbar)
self.retranslateUi(MainWindow)
self.tabWidget.setCurrentIndex(0)
QMetaObject.connectSlotsByName(MainWindow)
def __init__(self, content=None, filename=None, parent=None):
"""
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
"""
super(PythonFileInterpreter, self).__init__(parent)
# layout
self.editor = CodeEditor("AlternateCSPythonLexer", self)
# Clear QsciScintilla key bindings that may override PyQt's bindings
self.clear_key_binding("Ctrl+/")
self.status = QStatusBar(self)
self.layout = QVBoxLayout()
self.layout.addWidget(self.editor)
self.layout.addWidget(self.status)
self.setLayout(self.layout)
self.layout.setContentsMargins(0, 0, 0, 0)
self._setup_editor(content, filename)
self.setAttribute(Qt.WA_DeleteOnClose, True)
self._presenter = PythonFileInterpreterPresenter(
self, PythonCodeExecution(content))
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
self.find_replace_dialog = None
self.find_replace_dialog_shown = False
def __init__(self, font=None, content=None, filename=None,
parent=None):
"""
:param font: A reference to the font to be used by the editor. If not supplied use the system default
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
"""
super(PythonFileInterpreter, self).__init__(parent)
self.parent = parent
# layout
font = font if font is not None else QFont()
self.editor = CodeEditor("AlternateCSPython", font, self)
self.find_replace_dialog = None
self.status = QStatusBar(self)
self.layout = QVBoxLayout()
self.layout.setContentsMargins(0, 0, 0, 0)
self.layout.addWidget(self.editor)
self.layout.addWidget(self.status)
self.setLayout(self.layout)
self._setup_editor(content, filename)
self._presenter = PythonFileInterpreterPresenter(self, PythonCodeExecution(content))
self.code_commenter = CodeCommenter(self.editor)
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
self.setAttribute(Qt.WA_DeleteOnClose, True)
# Connect the model signals to the view's signals so they can be accessed from outside the MVP
self._presenter.model.sig_exec_progress.connect(self.sig_progress)
self._presenter.model.sig_exec_error.connect(self.sig_exec_error)
self._presenter.model.sig_exec_success.connect(self.sig_exec_success)
def __init__(self, qt_widget, *, show):
self.qt_widget = qt_widget
self._qt_window = QMainWindow()
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
if hasattr(self.qt_widget.model, "title"):
self._qt_window.setWindowTitle(self.qt_widget.model.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._status_bar.showMessage("Ready")
self._help = QLabel("")
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_widget)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
# self._add_viewer_dock_widget(self.qt_widget.dockConsole)
# self._add_viewer_dock_widget(self.qt_widget.dockLayerControls)
# self._add_viewer_dock_widget(self.qt_widget.dockLayerList)
# self.qt_widget.viewer.events.status.connect(self._status_changed)
# self.qt_widget.viewer.events.help.connect(self._help_changed)
# self.qt_widget.viewer.events.title.connect(self._title_changed)
# self.qt_widget.viewer.events.palette.connect(self._update_palette)
if show:
self.show()
def __init__(self, qt_viewer: QtViewer, *, show: bool = True):
self.qt_viewer = qt_viewer
self._qt_window = QMainWindow()
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
# since we initialize canvas before window, we need to manually connect them again.
if self._qt_window.windowHandle() is not None:
self._qt_window.windowHandle().screenChanged.connect(
self.qt_viewer.canvas._backend.screen_changed)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
self._add_plugins_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette()
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(self._update_palette)
if perf.USE_PERFMON:
# Add DebugMenu and dockPerformance if using perfmon.
self._debug_menu = DebugMenu(self)
self._add_viewer_dock_widget(self.qt_viewer.dockPerformance)
else:
self._debug_menu = None
if self.qt_viewer.dockRender is not None:
self._add_viewer_dock_widget(self.qt_viewer.dockRender)
if show:
self.show()
def setup_status_bar(self):
"""Set up status bar."""
status_bar = QStatusBar(self)
status_bar.addPermanentWidget(QLabel("Clicked", self))
status_bar.addPermanentWidget(self.clicked_label)
status_bar.addPermanentWidget(QLabel("Solution", self))
status_bar.addPermanentWidget(self.n_solution_1_label)
self.setStatusBar(status_bar)
def __init__(self, qt_viewer: QtViewer, *, show: bool = True):
self.qt_viewer = qt_viewer
self._qt_window = QMainWindow()
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
self._add_plugins_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette()
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(self._update_palette)
if perf.USE_PERFMON:
# Add DebugMenu if using perfmon. The DebugMenu is intended to
# contain non-perfmon stuff as well. When it does we will want
# a separate env variable for it.
self._debug_menu = DebugMenu(self)
# The QtPerformance widget only exists if we are using perfmon.
self._add_viewer_dock_widget(self.qt_viewer.dockPerformance)
else:
self._debug_menu = None
if show:
self.show()
def __init__(self,
font=None,
content=None,
filename=None,
parent=None,
completion_enabled=True):
"""
:param font: A reference to the font to be used by the editor. If not supplied use the system default
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
:param completion_enabled: Optional parameter to control code auto-completion suggestions
"""
super(PythonFileInterpreter, self).__init__(parent)
self.parent = parent
self.completion_enabled = completion_enabled
# layout
font = font if font is not None else QFont()
self.editor = CodeEditor("AlternateCSPython", font, self)
self.find_replace_dialog = None
self.status = QStatusBar(self)
self.layout = QVBoxLayout()
self.layout.setContentsMargins(0, 0, 0, 0)
self.layout.addWidget(self.editor)
self.layout.addWidget(self.status)
self.setLayout(self.layout)
self._setup_editor(content, filename)
self._presenter = PythonFileInterpreterPresenter(
self, PythonCodeExecution(self.editor))
self.code_commenter = CodeCommenter(self.editor)
if self.completion_enabled:
self.code_completer = CodeCompleter(
self.editor, self._presenter.model.globals_ns)
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
self.setAttribute(Qt.WA_DeleteOnClose, True)
# Connect the model signals to the view's signals so they can be accessed from outside the MVP
self._presenter.model.sig_exec_error.connect(self.sig_exec_error)
self._presenter.model.sig_exec_success.connect(self.sig_exec_success)
if self.completion_enabled:
# Re-populate the completion API after execution success
self._presenter.model.sig_exec_success.connect(
self.code_completer.update_completion_api)
# Only load the simpleapi completions if the code editor starts being modified.
self.sig_editor_modified.connect(
self.code_completer.add_simpleapi_to_completions_if_required)
class WorkspacesView(QMainWindow):
"""
class
"""
def __init__(self, parent=None):
"""
Init
:param parent:
"""
from .ui.workspaceviewwidget import WorkspaceViewWidget
QMainWindow.__init__(self)
# set up
self.setObjectName(_fromUtf8("MainWindow"))
self.resize(1600, 1200)
self.centralwidget = QWidget(self)
self.centralwidget.setObjectName(_fromUtf8("centralwidget"))
self.gridLayout = QGridLayout(self.centralwidget)
self.gridLayout.setObjectName(_fromUtf8("gridLayout"))
self.widget = WorkspaceViewWidget(self)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Expanding)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.widget.sizePolicy().hasHeightForWidth())
self.widget.setSizePolicy(sizePolicy)
self.widget.setObjectName(_fromUtf8("widget"))
self.gridLayout.addWidget(self.widget, 1, 0, 1, 1)
self.label = QLabel(self.centralwidget)
self.label.setObjectName(_fromUtf8("label"))
self.gridLayout.addWidget(self.label, 0, 0, 1, 1)
self.setCentralWidget(self.centralwidget)
self.menubar = QMenuBar(self)
self.menubar.setGeometry(QtCore.QRect(0, 0, 1005, 25))
self.menubar.setObjectName(_fromUtf8("menubar"))
self.setMenuBar(self.menubar)
self.statusbar = QStatusBar(self)
self.statusbar.setObjectName(_fromUtf8("statusbar"))
self.setStatusBar(self.statusbar)
self.toolBar = QToolBar(self)
self.toolBar.setObjectName(_fromUtf8("toolBar"))
self.addToolBar(QtCore.Qt.TopToolBarArea, self.toolBar)
# self.retranslateUi(self)
QtCore.QMetaObject.connectSlotsByName(self)
def __init__(self, qt_viewer, *, show=True):
self.qt_viewer = qt_viewer
self._qt_window = QMainWindow()
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._qt_window.closeEvent = self.closeEvent
self.close = self._qt_window.close
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette(qt_viewer.viewer.palette)
if self.qt_viewer.console.shell is not None:
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(
lambda event: self._update_palette(event.palette))
if show:
self.show()
def __init__(self, qt_viewer: QtViewer, *, show: bool = True):
self.qt_viewer = qt_viewer
self._qt_window = QMainWindow()
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
self._add_plugins_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette()
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(self._update_palette)
if show:
self.show()
def __init__(self, parent, central_widget, name, window_width=600, window_height=400, presenter=None):
super(StatusBarView, self).__init__(parent)
self.presenter = presenter
self.setCentralWidget(central_widget)
self.setWindowTitle("{} - Mantid".format(name))
self.setAttribute(Qt.WA_DeleteOnClose, True)
self.status_bar = QStatusBar(self)
self.setStatusBar(self.status_bar)
self.resize(window_width, window_height)
self.close_signal.connect(self._run_close)
self.rename_signal.connect(self._run_rename)
def __init__(self, content=None, filename=None, parent=None):
"""
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
"""
super(PythonFileInterpreter, self).__init__(parent)
# layout
self.editor = CodeEditor("AlternateCSPythonLexer", self)
self.status = QStatusBar(self)
layout = QVBoxLayout()
layout.addWidget(self.editor)
layout.addWidget(self.status)
self.setLayout(layout)
layout.setContentsMargins(0, 0, 0, 0)
self._setup_editor(content, filename)
self._presenter = PythonFileInterpreterPresenter(
self, PythonCodeExecution(content))
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
def __init__(self,
parent,
preferences,
signal_model,
default_signal=None,
is_remux=False):
super(ExtractAudioDialog, self).__init__(parent)
self.setupUi(self)
for f in COMPRESS_FORMAT_OPTIONS:
self.audioFormat.addItem(f)
self.showProbeButton.setIcon(qta.icon('fa5s.info'))
self.showRemuxCommand.setIcon(qta.icon('fa5s.info'))
self.inputFilePicker.setIcon(qta.icon('fa5s.folder-open'))
self.targetDirPicker.setIcon(qta.icon('fa5s.folder-open'))
self.calculateGainAdjustment.setIcon(qta.icon('fa5s.sliders-h'))
self.limitRange.setIcon(qta.icon('fa5s.cut'))
self.statusBar = QStatusBar()
self.statusBar.setSizeGripEnabled(False)
self.boxLayout.addWidget(self.statusBar)
self.__preferences = preferences
self.__signal_model = signal_model
self.__default_signal = default_signal
self.__executor = None
self.__sound = None
self.__extracted = False
self.__stream_duration_micros = []
self.__is_remux = is_remux
if self.__is_remux:
self.setWindowTitle('Remux Audio')
self.showRemuxCommand.setVisible(self.__is_remux)
defaultOutputDir = self.__preferences.get(EXTRACTION_OUTPUT_DIR)
if os.path.isdir(defaultOutputDir):
self.targetDir.setText(defaultOutputDir)
self.__reinit_fields()
self.filterMapping.itemDoubleClicked.connect(self.show_mapping_dialog)
self.inputDrop.callback = self.__handle_drop
def __init__(self, parent=None):
super(UiMainWindow, self).__init__(parent)
DispatchHandle.setup(self)
self.showMaximized()
self.setMinimumSize(QSize(640, 480))
self.setDockOptions(QMainWindow.AnimatedDocks)
self.setWindowTitle("SpecViz")
self.widget_central = QWidget(self)
self.setCentralWidget(self.widget_central)
# Toolbar
self.layout_vertical = QVBoxLayout(self.widget_central)
# MDI area setup
self.mdi_area = MdiArea(self.widget_central)
self.mdi_area.setFrameShape(QFrame.StyledPanel)
self.mdi_area.setFrameShadow(QFrame.Plain)
self.mdi_area.setLineWidth(2)
brush = QBrush(QColor(200, 200, 200))
brush.setStyle(Qt.SolidPattern)
self.mdi_area.setBackground(brush)
self.mdi_area.setAcceptDrops(True)
self.layout_vertical.addWidget(self.mdi_area)
# Menu bar setup
self.menu_bar = QMenuBar(self)
self.menu_file = QMenu(self.menu_bar)
self.menu_file.setTitle("File")
self.menu_edit = QMenu(self.menu_bar)
self.menu_edit.setTitle("Edit")
self.menu_view = QMenu(self.menu_bar)
self.menu_edit.setTitle("View")
self.menu_docks = QMenu(self.menu_bar)
self.setMenuBar(self.menu_bar)
# Status bar setup
self.status_bar = QStatusBar(self)
self.setStatusBar(self.status_bar)
def __init__(self, parent, preferences):
super(BatchExtractDialog, self).__init__(parent)
self.setupUi(self)
self.setWindowFlags(self.windowFlags() | Qt.WindowSystemMenuHint
| Qt.WindowMinMaxButtonsHint)
self.__candidates = None
self.__preferences = preferences
self.__search_spinner = None
default_output_dir = self.__preferences.get(EXTRACTION_OUTPUT_DIR)
if os.path.isdir(default_output_dir):
self.outputDir.setText(default_output_dir)
filt = self.__preferences.get(EXTRACTION_BATCH_FILTER)
if filt is not None:
self.filter.setText(filt)
self.outputDirPicker.setIcon(qta.icon('fa5s.folder-open'))
self.statusBar = QStatusBar()
self.verticalLayout.addWidget(self.statusBar)
try:
core_count = QThreadPool.globalInstance().maxThreadCount()
self.threads.setMaximum(core_count)
self.threads.setValue(core_count)
except Exception as e:
logger.warning(f"Unable to get cpu_count()", e)
def __init__(self, content=None, filename=None,
parent=None):
"""
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
"""
super(PythonFileInterpreter, self).__init__(parent)
# layout
self.editor = CodeEditor("AlternateCSPythonLexer", self)
self.status = QStatusBar(self)
layout = QVBoxLayout()
layout.addWidget(self.editor)
layout.addWidget(self.status)
self.setLayout(layout)
layout.setContentsMargins(0, 0, 0, 0)
self._setup_editor(content, filename)
self._presenter = PythonFileInterpreterPresenter(self,
PythonCodeExecution(content))
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
def setupUi(self):
self.resize(800, 600)
self.setWindowTitle('cutelog')
self.loggerTabWidget = QTabWidget(self)
self.loggerTabWidget.setTabsClosable(True)
self.loggerTabWidget.setMovable(True)
self.loggerTabWidget.setTabBarAutoHide(True)
self.loggerTabWidget.currentChanged.connect(self.change_actions_state)
self.setCentralWidget(self.loggerTabWidget)
self.statusbar = QStatusBar(self)
self.setStatusBar(self.statusbar)
self.setup_menubar()
self.setup_action_triggers()
self.setup_shortcuts()
self.loggerTabWidget.tabCloseRequested.connect(self.close_tab)
self.reload_stylesheet()
self.restore_geometry()
self.show()
def __init__(self, presenter: IDataViewSubscriber, dims_info, can_normalise, parent=None, conf=None):
super().__init__(parent)
self.presenter = presenter
self.image = None
self.line_plots_active = False
self.can_normalise = can_normalise
self.nonortho_transform = None
self.conf = conf
self._line_plots = None
self._image_info_tracker = None
self._region_selection_on = False
self._orig_lims = None
# Dimension widget
self.dimensions_layout = QGridLayout()
self.dimensions = DimensionWidget(dims_info, parent=self)
self.dimensions.dimensionsChanged.connect(self.presenter.dimensions_changed)
self.dimensions.valueChanged.connect(self.presenter.slicepoint_changed)
self.dimensions_layout.addWidget(self.dimensions, 1, 0, 1, 1)
self.colorbar_layout = QVBoxLayout()
self.colorbar_layout.setContentsMargins(0, 0, 0, 0)
self.colorbar_layout.setSpacing(0)
self.image_info_widget = ImageInfoWidget(self)
self.image_info_widget.setToolTip("Information about the selected pixel")
self.track_cursor = QCheckBox("Track Cursor", self)
self.track_cursor.setToolTip(
"Update the image readout table when the cursor is over the plot. "
"If unticked the table will update only when the plot is clicked")
self.dimensions_layout.setHorizontalSpacing(10)
self.dimensions_layout.addWidget(self.track_cursor, 0, 1, Qt.AlignRight)
self.dimensions_layout.addWidget(self.image_info_widget, 1, 1)
self.track_cursor.setChecked(True)
self.track_cursor.stateChanged.connect(self.on_track_cursor_state_change)
# normalization options
if can_normalise:
self.norm_label = QLabel("Normalization")
self.colorbar_layout.addWidget(self.norm_label)
self.norm_opts = QComboBox()
self.norm_opts.addItems(["None", "By bin width"])
self.norm_opts.setToolTip("Normalization options")
self.colorbar_layout.addWidget(self.norm_opts)
# MPL figure + colorbar
self.fig = Figure()
self.ax = None
self.image = None
self._grid_on = False
self.fig.set_facecolor(self.palette().window().color().getRgbF())
self.canvas = SliceViewerCanvas(self.fig)
self.canvas.mpl_connect('button_release_event', self.mouse_release)
self.canvas.mpl_connect('button_press_event', self.presenter.canvas_clicked)
self.colorbar_label = QLabel("Colormap")
self.colorbar_layout.addWidget(self.colorbar_label)
norm_scale = self.get_default_scale_norm()
self.colorbar = ColorbarWidget(self, norm_scale)
self.colorbar.cmap.setToolTip("Colormap options")
self.colorbar.crev.setToolTip("Reverse colormap")
self.colorbar.norm.setToolTip("Colormap normalisation options")
self.colorbar.powerscale.setToolTip("Power colormap scale")
self.colorbar.cmax.setToolTip("Colormap maximum limit")
self.colorbar.cmin.setToolTip("Colormap minimum limit")
self.colorbar.autoscale.setToolTip("Automatically changes colormap limits when zooming on the plot")
self.colorbar_layout.addWidget(self.colorbar)
self.colorbar.colorbarChanged.connect(self.update_data_clim)
self.colorbar.scaleNormChanged.connect(self.scale_norm_changed)
# make width larger to fit image readout table
self.colorbar.setMaximumWidth(200)
# MPL toolbar
self.toolbar_layout = QHBoxLayout()
self.mpl_toolbar = SliceViewerNavigationToolbar(self.canvas, self, False)
self.mpl_toolbar.gridClicked.connect(self.toggle_grid)
self.mpl_toolbar.linePlotsClicked.connect(self.on_line_plots_toggle)
self.mpl_toolbar.regionSelectionClicked.connect(self.on_region_selection_toggle)
self.mpl_toolbar.homeClicked.connect(self.on_home_clicked)
self.mpl_toolbar.nonOrthogonalClicked.connect(self.on_non_orthogonal_axes_toggle)
self.mpl_toolbar.zoomPanClicked.connect(self.presenter.zoom_pan_clicked)
self.mpl_toolbar.zoomPanFinished.connect(self.on_data_limits_changed)
self.toolbar_layout.addWidget(self.mpl_toolbar)
# Status bar
self.status_bar = QStatusBar(parent=self)
self.status_bar.setStyleSheet('QStatusBar::item {border: None;}') # Hide spacers between button and label
self.status_bar_label = QLabel()
self.help_button = QToolButton()
self.help_button.setText("?")
self.status_bar.addWidget(self.help_button)
self.status_bar.addWidget(self.status_bar_label)
# layout
layout = QGridLayout(self)
layout.setSpacing(1)
layout.addLayout(self.dimensions_layout, 0, 0, 1, 2)
layout.addLayout(self.toolbar_layout, 1, 0, 1, 1)
layout.addLayout(self.colorbar_layout, 1, 1, 3, 1)
layout.addWidget(self.canvas, 2, 0, 1, 1)
layout.addWidget(self.status_bar, 3, 0, 1, 1)
layout.setRowStretch(2, 1)
class Window:
"""Application window that contains the menu bar and viewer.
Parameters
----------
qt_widget : QtViewer
Contained viewer widget.
Attributes
----------
file_menu : qtpy.QtWidgets.QMenu
File menu.
help_menu : qtpy.QtWidgets.QMenu
Help menu.
main_menu : qtpy.QtWidgets.QMainWindow.menuBar
Main menubar.
qt_widget : QtViewer
Contained viewer widget.
view_menu : qtpy.QtWidgets.QMenu
View menu.
window_menu : qtpy.QtWidgets.QMenu
Window menu.
"""
def __init__(self, qt_widget, *, show):
self.qt_widget = qt_widget
self._qt_window = QMainWindow()
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
if hasattr(self.qt_widget.model, "title"):
self._qt_window.setWindowTitle(self.qt_widget.model.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._status_bar.showMessage("Ready")
self._help = QLabel("")
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_widget)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
# self._add_viewer_dock_widget(self.qt_widget.dockConsole)
# self._add_viewer_dock_widget(self.qt_widget.dockLayerControls)
# self._add_viewer_dock_widget(self.qt_widget.dockLayerList)
# self.qt_widget.viewer.events.status.connect(self._status_changed)
# self.qt_widget.viewer.events.help.connect(self._help_changed)
# self.qt_widget.viewer.events.title.connect(self._title_changed)
# self.qt_widget.viewer.events.palette.connect(self._update_palette)
if show:
self.show()
def resize(self, width, height):
"""Resize the window.
Parameters
----------
width : int
Width in logical pixels.
height : int
Height in logical pixels.
"""
self._qt_window.resize(width, height)
def show(self):
"""Resize, show, and bring forward the window."""
self._qt_window.resize(self._qt_window.layout().sizeHint())
self._qt_window.show()
# We want to call Window._qt_window.raise_() in every case *except*
# when instantiating a viewer within a gui_qt() context for the
# _first_ time within the Qt app's lifecycle.
#
# `app_name` will be ours iff the application was instantiated in
# gui_qt(). isActiveWindow() will be True if it is the second time a
# _qt_window has been created. See #732
app_name = QApplication.instance().applicationName()
if app_name != get_our_app_name() or self._qt_window.isActiveWindow():
self._qt_window.raise_() # for macOS
self._qt_window.activateWindow() # for Windows
def _status_changed(self, event):
"""Update status bar.
Parameters
----------
event : qtpy.QtCore.QEvent
Event from the Qt context.
"""
self._status_bar.showMessage(event.text)
def _title_changed(self, event):
"""Update window title.
Parameters
----------
event : qtpy.QtCore.QEvent
Event from the Qt context.
"""
self._qt_window.setWindowTitle(event.text)
def _help_changed(self, event):
"""Update help message on status bar.
Parameters
----------
event : qtpy.QtCore.QEvent
Event from the Qt context.
"""
self._help.setText(event.text)
def _screenshot_dialog(self):
"""Save screenshot of current display with viewer, default .png"""
filename, _ = QFileDialog.getSaveFileName(
parent=self.qt_widget,
caption="Save screenshot with viewer",
directory=self.qt_widget._last_visited_dir, # home dir by default
filter="Image files (*.png *.bmp *.gif *.tif *.tiff)", # first one used by default
# jpg and jpeg not included as they don't support an alpha channel
)
if (filename != "") and (filename is not None):
# double check that an appropriate extension has been added as the
# filter option does not always add an extension on linux and windows
# see https://bugreports.qt.io/browse/QTBUG-27186
image_extensions = (".bmp", ".gif", ".png", ".tif", ".tiff")
if not filename.endswith(image_extensions):
filename = filename + ".png"
self.screenshot(path=filename)
def screenshot(self, path=None):
"""Take currently displayed viewer and convert to an image array.
Parameters
----------
path : str
Filename for saving screenshot image.
Returns
-------
image : array
Numpy array of type ubyte and shape (h, w, 4). Index [0, 0] is the
upper-left corner of the rendered region.
"""
img = self._qt_window.grab().toImage()
if path is not None:
from skimage.io import imsave
from .utils import QImg2array # noqa: E402
imsave(path, QImg2array(img))
return QImg2array(img)
def close(self):
"""Close the viewer window and cleanup sub-widgets."""
# on some versions of Darwin, exiting while fullscreen seems to tickle
# some bug deep in NSWindow. This forces the fullscreen keybinding
# test to complete its draw cycle, then pop back out of fullscreen.
if self._qt_window.isFullScreen():
self._qt_window.showNormal()
for i in range(8):
time.sleep(0.1)
QApplication.processEvents()
self.qt_widget.close()
self._qt_window.close()
wait_for_workers_to_quit()
del self._qt_window
class PythonFileInterpreter(QWidget):
sig_editor_modified = Signal(bool)
sig_filename_modified = Signal(str)
sig_progress = Signal(int)
sig_exec_error = Signal(object)
sig_exec_success = Signal(object)
def __init__(self, font=None, content=None, filename=None,
parent=None):
"""
:param font: A reference to the font to be used by the editor. If not supplied use the system default
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
"""
super(PythonFileInterpreter, self).__init__(parent)
self.parent = parent
# layout
font = font if font is not None else QFont()
self.editor = CodeEditor("AlternateCSPython", font, self)
self.find_replace_dialog = None
self.status = QStatusBar(self)
self.layout = QVBoxLayout()
self.layout.setContentsMargins(0, 0, 0, 0)
self.layout.addWidget(self.editor)
self.layout.addWidget(self.status)
self.setLayout(self.layout)
self._setup_editor(content, filename)
self._presenter = PythonFileInterpreterPresenter(self, PythonCodeExecution(content))
self.code_commenter = CodeCommenter(self.editor)
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
self.setAttribute(Qt.WA_DeleteOnClose, True)
# Connect the model signals to the view's signals so they can be accessed from outside the MVP
self._presenter.model.sig_exec_progress.connect(self.sig_progress)
self._presenter.model.sig_exec_error.connect(self.sig_exec_error)
self._presenter.model.sig_exec_success.connect(self.sig_exec_success)
def closeEvent(self, event):
self.deleteLater()
if self.find_replace_dialog:
self.find_replace_dialog.close()
super(PythonFileInterpreter, self).closeEvent(event)
def show_find_replace_dialog(self):
if self.find_replace_dialog is None:
self.find_replace_dialog = EmbeddedFindReplaceDialog(self, self.editor)
self.layout.insertWidget(0, self.find_replace_dialog.view)
self.find_replace_dialog.show()
def hide_find_replace_dialog(self):
if self.find_replace_dialog is not None:
self.find_replace_dialog.hide()
@property
def filename(self):
return self.editor.fileName()
def confirm_close(self):
"""Confirm the widget can be closed. If the editor contents are modified then
a user can interject and cancel closing.
:return: True if closing was considered successful, false otherwise
"""
return self.save(prompt_for_confirmation=self.parent.confirm_on_save)
def abort(self):
self._presenter.req_abort()
def execute_async(self, ignore_selection=False):
return self._presenter.req_execute_async(ignore_selection)
def execute_async_blocking(self):
self._presenter.req_execute_async_blocking()
def save(self, prompt_for_confirmation=False, force_save=False):
if self.editor.isModified():
io = EditorIO(self.editor)
return io.save_if_required(prompt_for_confirmation, force_save)
else:
return True
def save_as(self):
io = EditorIO(self.editor)
new_filename = io.ask_for_filename()
if new_filename:
return io.write(save_as=new_filename), new_filename
else:
return False, None
def set_editor_readonly(self, ro):
self.editor.setReadOnly(ro)
def set_status_message(self, msg):
self.status.showMessage(msg)
def replace_tabs_with_spaces(self):
self.replace_text(TAB_CHAR, SPACE_CHAR * TAB_WIDTH)
def replace_text(self, match_text, replace_text):
if self.editor.selectedText() == '':
self.editor.selectAll()
new_text = self.editor.selectedText().replace(match_text, replace_text)
self.editor.replaceSelectedText(new_text)
def replace_spaces_with_tabs(self):
self.replace_text(SPACE_CHAR * TAB_WIDTH, TAB_CHAR)
def set_whitespace_visible(self):
self.editor.setWhitespaceVisibility(CodeEditor.WsVisible)
def set_whitespace_invisible(self):
self.editor.setWhitespaceVisibility(CodeEditor.WsInvisible)
def toggle_comment(self):
self.code_commenter.toggle_comment()
def _setup_editor(self, default_content, filename):
editor = self.editor
# Clear default QsciScintilla key bindings that we want to allow
# to be users of this class
self.clear_key_binding("Ctrl+/")
# use tabs not spaces for indentation
editor.setIndentationsUseTabs(False)
editor.setTabWidth(TAB_WIDTH)
# show current editing line but in a softer color
editor.setCaretLineBackgroundColor(CURRENTLINE_BKGD_COLOR)
editor.setCaretLineVisible(True)
# set a margin large enough for sensible file sizes < 1000 lines
# and the progress marker
font_metrics = QFontMetrics(self.font())
editor.setMarginWidth(1, font_metrics.averageCharWidth() * 3 + 20)
# fill with content if supplied and set source filename
if default_content is not None:
editor.setText(default_content)
if filename is not None:
editor.setFileName(filename)
# Default content does not count as a modification
editor.setModified(False)
editor.enableAutoCompletion(CodeEditor.AcsAll)
def clear_key_binding(self, key_str):
"""Clear a keyboard shortcut bound to a Scintilla command"""
self.editor.clearKeyBinding(key_str)
class Window:
"""Application window that contains the menu bar and viewer.
Parameters
----------
qt_viewer : QtViewer
Contained viewer widget.
Attributes
----------
qt_viewer : QtViewer
Contained viewer widget.
"""
with open(os.path.join(resources_dir, 'stylesheet.qss'), 'r') as f:
raw_stylesheet = f.read()
def __init__(self, qt_viewer, *, show=True):
self.qt_viewer = qt_viewer
self._qt_window = QMainWindow()
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._qt_window.closeEvent = self.closeEvent
self.close = self._qt_window.close
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette(qt_viewer.viewer.palette)
if self.qt_viewer.console.shell is not None:
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(
lambda event: self._update_palette(event.palette))
if show:
self.show()
def _add_menubar(self):
self.main_menu = self._qt_window.menuBar()
# Menubar shortcuts are only active when the menubar is visible.
# Therefore, we set a global shortcut not associated with the menubar
# to toggle visibility, *but*, in order to not shadow the menubar
# shortcut, we disable it, and only enable it when the menubar is
# hidden. See this stackoverflow link for details:
# https://stackoverflow.com/questions/50537642/how-to-keep-the-shortcuts-of-a-hidden-widget-in-pyqt5
self._main_menu_shortcut = QShortcut(QKeySequence('Ctrl+M'),
self._qt_window)
self._main_menu_shortcut.activated.connect(
self._toggle_menubar_visible)
self._main_menu_shortcut.setEnabled(False)
def _toggle_menubar_visible(self):
"""Toggle visibility of app menubar.
This function also disables or enables a global keyboard shortcut to
show the menubar, since menubar shortcuts are only available while the
menubar is visible.
"""
if self.main_menu.isVisible():
self.main_menu.setVisible(False)
self._main_menu_shortcut.setEnabled(True)
else:
self.main_menu.setVisible(True)
self._main_menu_shortcut.setEnabled(False)
def _add_file_menu(self):
open_images = QAction('Open image(s)...', self._qt_window)
open_images.setShortcut('Ctrl+O')
open_images.setStatusTip('Open image file(s)')
open_images.triggered.connect(self.qt_viewer._open_images)
open_folder = QAction('Open Folder...', self._qt_window)
open_folder.setShortcut('Ctrl-Shift-O')
open_folder.setStatusTip(
'Open a folder of image file(s) or a zarr file')
open_folder.triggered.connect(self.qt_viewer._open_folder)
self.file_menu = self.main_menu.addMenu('&File')
self.file_menu.addAction(open_images)
self.file_menu.addAction(open_folder)
def _add_view_menu(self):
toggle_visible = QAction('Toggle menubar visibility', self._qt_window)
toggle_visible.setShortcut('Ctrl+M')
toggle_visible.setStatusTip('Hide Menubar')
toggle_visible.triggered.connect(self._toggle_menubar_visible)
self.view_menu = self.main_menu.addMenu('&View')
self.view_menu.addAction(toggle_visible)
def _add_window_menu(self):
exit_action = QAction("Close window", self._qt_window)
exit_action.setShortcut("Ctrl+W")
exit_action.setStatusTip('Close napari window')
exit_action.triggered.connect(self._qt_window.close)
self.window_menu = self.main_menu.addMenu('&Window')
self.window_menu.addAction(exit_action)
def _add_help_menu(self):
self.help_menu = self.main_menu.addMenu('&Help')
about_action = QAction("napari info", self._qt_window)
about_action.setShortcut("Ctrl+/")
about_action.setStatusTip('About napari')
about_action.triggered.connect(
lambda e: QtAbout.showAbout(self.qt_viewer))
self.help_menu.addAction(about_action)
about_keybindings = QAction("keybindings", self._qt_window)
about_keybindings.setShortcut("Ctrl+Alt+/")
about_keybindings.setShortcutContext(Qt.ApplicationShortcut)
about_keybindings.setStatusTip('keybindings')
about_keybindings.triggered.connect(
self.qt_viewer.aboutKeybindings.toggle_visible)
self.help_menu.addAction(about_keybindings)
def add_dock_widget(
self,
widget: QWidget,
*,
name: str = '',
area: str = 'bottom',
allowed_areas=None,
shortcut=None,
):
"""Convenience method to add a QDockWidget to the main window
Parameters
----------
widget : QWidget
`widget` will be added as QDockWidget's main widget.
name : str, optional
Name of dock widget to appear in window menu.
area : str
Side of the main window to which the new dock widget will be added.
Must be in {'left', 'right', 'top', 'bottom'}
allowed_areas : list[str], optional
Areas, relative to main window, that the widget is allowed dock.
Each item in list must be in {'left', 'right', 'top', 'bottom'}
By default, all areas are allowed.
shortcut : str, optional
Keyboard shortcut to appear in dropdown menu.
Returns
-------
dock_widget : QtViewerDockWidget
`dock_widget` that can pass viewer events.
"""
dock_widget = QtViewerDockWidget(
self.qt_viewer,
widget,
name=name,
area=area,
allowed_areas=allowed_areas,
shortcut=shortcut,
)
self._add_viewer_dock_widget(dock_widget)
return dock_widget
def _add_viewer_dock_widget(self, dock_widget: QtViewerDockWidget):
"""Add a QtViewerDockWidget to the main window
Parameters
----------
dock_widget : QtViewerDockWidget
`dock_widget` will be added to the main window.
"""
dock_widget.setParent(self._qt_window)
self._qt_window.addDockWidget(dock_widget.qt_area, dock_widget)
action = dock_widget.toggleViewAction()
action.setStatusTip(dock_widget.name)
action.setText(dock_widget.name)
if dock_widget.shortcut is not None:
action.setShortcut(dock_widget.shortcut)
self.window_menu.addAction(action)
def remove_dock_widget(self, widget):
"""Removes specified dock widget.
Parameters
----------
widget : QWidget | str
If widget == 'all', all docked widgets will be removed.
"""
if widget == 'all':
for dw in self._qt_window.findChildren(QDockWidget):
self._qt_window.removeDockWidget(dw)
else:
self._qt_window.removeDockWidget(widget)
def resize(self, width, height):
"""Resize the window.
Parameters
----------
width : int
Width in logical pixels.
height : int
Height in logical pixels.
"""
self._qt_window.resize(width, height)
def show(self):
"""Resize, show, and bring forward the window."""
self._qt_window.resize(self._qt_window.layout().sizeHint())
self._qt_window.show()
# We want to call Window._qt_window.raise_() in every case *except*
# when instantiating a viewer within a gui_qt() context for the
# _first_ time within the Qt app's lifecycle.
#
# `app_name` will be "napari" iff the application was instantiated in
# gui_qt(). isActiveWindow() will be True if it is the second time a
# _qt_window has been created. See #732
app_name = QApplication.instance().applicationName()
if app_name != 'napari' or self._qt_window.isActiveWindow():
self._qt_window.raise_() # for macOS
self._qt_window.activateWindow() # for Windows
def _update_palette(self, palette):
# set window styles which don't use the primary stylesheet
# FIXME: this is a problem with the stylesheet not using properties
self._status_bar.setStyleSheet(
template(
'QStatusBar { background: {{ background }}; '
'color: {{ text }}; }',
**palette,
))
self._qt_center.setStyleSheet(
template('QWidget { background: {{ background }}; }', **palette))
self._qt_window.setStyleSheet(template(self.raw_stylesheet, **palette))
def _status_changed(self, event):
"""Update status bar.
"""
self._status_bar.showMessage(event.text)
def _title_changed(self, event):
"""Update window title.
"""
self._qt_window.setWindowTitle(event.text)
def _help_changed(self, event):
"""Update help message on status bar.
"""
self._help.setText(event.text)
def screenshot(self):
"""Take currently displayed viewer and convert to an image array.
Returns
-------
image : array
Numpy array of type ubyte and shape (h, w, 4). Index [0, 0] is the
upper-left corner of the rendered region.
"""
img = self._qt_window.grab().toImage()
return QImg2array(img)
def closeEvent(self, event):
# Forward close event to the console to trigger proper shutdown
self.qt_viewer.console.shutdown()
# if the viewer.QtDims object is playing an axis, we need to terminate the
# AnimationThread before close, otherwise it will cauyse a segFault or Abort trap.
# (calling stop() when no animation is occuring is also not a problem)
self.qt_viewer.dims.stop()
event.accept()
class PythonFileInterpreter(QWidget):
sig_editor_modified = Signal(bool)
sig_filename_modified = Signal(str)
def __init__(self, content=None, filename=None,
parent=None):
"""
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
"""
super(PythonFileInterpreter, self).__init__(parent)
# layout
self.editor = CodeEditor("AlternateCSPythonLexer", self)
self.status = QStatusBar(self)
layout = QVBoxLayout()
layout.addWidget(self.editor)
layout.addWidget(self.status)
self.setLayout(layout)
layout.setContentsMargins(0, 0, 0, 0)
self._setup_editor(content, filename)
self._presenter = PythonFileInterpreterPresenter(self,
PythonCodeExecution(content))
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
@property
def filename(self):
return self.editor.fileName()
def confirm_close(self):
"""Confirm the widget can be closed. If the editor contents are modified then
a user can interject and cancel closing.
:return: True if closing was considered successful, false otherwise
"""
return self.save(confirm=True)
def abort(self):
self._presenter.req_abort()
def execute_async(self):
self._presenter.req_execute_async()
def save(self, confirm=False):
if self.editor.isModified():
io = EditorIO(self.editor)
return io.save_if_required(confirm)
else:
return True
def set_editor_readonly(self, ro):
self.editor.setReadOnly(ro)
def set_status_message(self, msg):
self.status.showMessage(msg)
def _setup_editor(self, default_content, filename):
editor = self.editor
# use tabs not spaces for indentation
editor.setIndentationsUseTabs(False)
editor.setTabWidth(TAB_WIDTH)
# show current editing line but in a softer color
editor.setCaretLineBackgroundColor(CURRENTLINE_BKGD_COLOR)
editor.setCaretLineVisible(True)
# set a margin large enough for sensible file sizes < 1000 lines
# and the progress marker
font_metrics = QFontMetrics(self.font())
editor.setMarginWidth(1, font_metrics.averageCharWidth() * 3 + 20)
# fill with content if supplied and set source filename
if default_content is not None:
editor.setText(default_content)
if filename is not None:
editor.setFileName(filename)
# Default content does not count as a modification
editor.setModified(False)
editor.enableAutoCompletion(CodeEditor.AcsAll)
class Window:
"""Application window that contains the menu bar and viewer.
Parameters
----------
qt_viewer : QtViewer
Contained viewer widget.
Attributes
----------
file_menu : qtpy.QtWidgets.QMenu
File menu.
help_menu : qtpy.QtWidgets.QMenu
Help menu.
main_menu : qtpy.QtWidgets.QMainWindow.menuBar
Main menubar.
qt_viewer : QtViewer
Contained viewer widget.
view_menu : qtpy.QtWidgets.QMenu
View menu.
window_menu : qtpy.QtWidgets.QMenu
Window menu.
"""
raw_stylesheet = get_stylesheet()
def __init__(self, qt_viewer: QtViewer, *, show: bool = True):
self.qt_viewer = qt_viewer
self._qt_window = QMainWindow()
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
self._add_plugins_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette()
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(self._update_palette)
if perf.USE_PERFMON:
# Add DebugMenu if using perfmon. The DebugMenu is intended to
# contain non-perfmon stuff as well. When it does we will want
# a separate env variable for it.
self._debug_menu = DebugMenu(self)
# The QtPerformance widget only exists if we are using perfmon.
self._add_viewer_dock_widget(self.qt_viewer.dockPerformance)
else:
self._debug_menu = None
if show:
self.show()
def _add_menubar(self):
"""Add menubar to napari app."""
self.main_menu = self._qt_window.menuBar()
# Menubar shortcuts are only active when the menubar is visible.
# Therefore, we set a global shortcut not associated with the menubar
# to toggle visibility, *but*, in order to not shadow the menubar
# shortcut, we disable it, and only enable it when the menubar is
# hidden. See this stackoverflow link for details:
# https://stackoverflow.com/questions/50537642/how-to-keep-the-shortcuts-of-a-hidden-widget-in-pyqt5
self._main_menu_shortcut = QShortcut(QKeySequence('Ctrl+M'),
self._qt_window)
self._main_menu_shortcut.activated.connect(
self._toggle_menubar_visible)
self._main_menu_shortcut.setEnabled(False)
def _toggle_menubar_visible(self):
"""Toggle visibility of app menubar.
This function also disables or enables a global keyboard shortcut to
show the menubar, since menubar shortcuts are only available while the
menubar is visible.
"""
if self.main_menu.isVisible():
self.main_menu.setVisible(False)
self._main_menu_shortcut.setEnabled(True)
else:
self.main_menu.setVisible(True)
self._main_menu_shortcut.setEnabled(False)
def _add_file_menu(self):
"""Add 'File' menu to app menubar."""
open_images = QAction('Open File(s)...', self._qt_window)
open_images.setShortcut('Ctrl+O')
open_images.setStatusTip('Open file(s)')
open_images.triggered.connect(self.qt_viewer._open_files_dialog)
open_stack = QAction('Open Files as Stack...', self._qt_window)
open_stack.setShortcut('Ctrl+Alt+O')
open_stack.setStatusTip('Open files')
open_stack.triggered.connect(
self.qt_viewer._open_files_dialog_as_stack_dialog)
open_folder = QAction('Open Folder...', self._qt_window)
open_folder.setShortcut('Ctrl+Shift+O')
open_folder.setStatusTip('Open a folder')
open_folder.triggered.connect(self.qt_viewer._open_folder_dialog)
save_selected_layers = QAction('Save Selected Layer(s)...',
self._qt_window)
save_selected_layers.setShortcut('Ctrl+S')
save_selected_layers.setStatusTip('Save selected layers')
save_selected_layers.triggered.connect(
lambda: self.qt_viewer._save_layers_dialog(selected=True))
save_all_layers = QAction('Save All Layers...', self._qt_window)
save_all_layers.setShortcut('Ctrl+Shift+S')
save_all_layers.setStatusTip('Save all layers')
save_all_layers.triggered.connect(
lambda: self.qt_viewer._save_layers_dialog(selected=False))
screenshot = QAction('Save Screenshot...', self._qt_window)
screenshot.setShortcut('Alt+S')
screenshot.setStatusTip(
'Save screenshot of current display, default .png')
screenshot.triggered.connect(self.qt_viewer._screenshot_dialog)
screenshot_wv = QAction('Save Screenshot with Viewer...',
self._qt_window)
screenshot_wv.setShortcut('Alt+Shift+S')
screenshot_wv.setStatusTip(
'Save screenshot of current display with the viewer, default .png')
screenshot_wv.triggered.connect(self._screenshot_dialog)
# OS X will rename this to Quit and put it in the app menu.
exitAction = QAction('Exit', self._qt_window)
exitAction.setShortcut('Ctrl+Q')
exitAction.setMenuRole(QAction.QuitRole)
def handle_exit():
# if the event loop was started in gui_qt() then the app will be
# named 'napari'. Since the Qapp was started by us, just close it.
if QApplication.applicationName() == 'napari':
QApplication.closeAllWindows()
QApplication.quit()
# otherwise, something else created the QApp before us (such as
# %gui qt IPython magic). If we quit the app in this case, then
# *later* attempts to instantiate a napari viewer won't work until
# the event loop is restarted with app.exec_(). So rather than
# quit just close all the windows (and clear our app icon).
else:
QApplication.setWindowIcon(QIcon())
self.close()
if perf.USE_PERFMON:
# Write trace file before exit, if we were writing one.
# Is there a better place to make sure this is done on exit?
perf.timers.stop_trace_file()
exitAction.triggered.connect(handle_exit)
self.file_menu = self.main_menu.addMenu('&File')
self.file_menu.addAction(open_images)
self.file_menu.addAction(open_stack)
self.file_menu.addAction(open_folder)
self.file_menu.addSeparator()
self.file_menu.addAction(save_selected_layers)
self.file_menu.addAction(save_all_layers)
self.file_menu.addAction(screenshot)
self.file_menu.addAction(screenshot_wv)
self.file_menu.addSeparator()
self.file_menu.addAction(exitAction)
def _add_view_menu(self):
"""Add 'View' menu to app menubar."""
toggle_visible = QAction('Toggle Menubar Visibility', self._qt_window)
toggle_visible.setShortcut('Ctrl+M')
toggle_visible.setStatusTip('Hide Menubar')
toggle_visible.triggered.connect(self._toggle_menubar_visible)
toggle_theme = QAction('Toggle Theme', self._qt_window)
toggle_theme.setShortcut('Ctrl+Shift+T')
toggle_theme.setStatusTip('Toggle theme')
toggle_theme.triggered.connect(self.qt_viewer.viewer._toggle_theme)
self.view_menu = self.main_menu.addMenu('&View')
self.view_menu.addAction(toggle_visible)
self.view_menu.addAction(toggle_theme)
def _add_window_menu(self):
"""Add 'Window' menu to app menubar."""
exit_action = QAction("Close Window", self._qt_window)
exit_action.setShortcut("Ctrl+W")
exit_action.setStatusTip('Close napari window')
exit_action.triggered.connect(self._qt_window.close)
self.window_menu = self.main_menu.addMenu('&Window')
self.window_menu.addAction(exit_action)
def _add_plugins_menu(self):
"""Add 'Plugins' menu to app menubar."""
self.plugins_menu = self.main_menu.addMenu('&Plugins')
list_plugins_action = QAction("List Installed Plugins...",
self._qt_window)
list_plugins_action.setStatusTip('List installed plugins')
list_plugins_action.triggered.connect(self._show_plugin_list)
self.plugins_menu.addAction(list_plugins_action)
order_plugin_action = QAction("Plugin Call Order...", self._qt_window)
order_plugin_action.setStatusTip('Change call order for plugins')
order_plugin_action.triggered.connect(self._show_plugin_sorter)
self.plugins_menu.addAction(order_plugin_action)
report_plugin_action = QAction("Plugin Errors...", self._qt_window)
report_plugin_action.setStatusTip(
'Review stack traces for plugin exceptions and notify developers')
report_plugin_action.triggered.connect(self._show_plugin_err_reporter)
self.plugins_menu.addAction(report_plugin_action)
def _show_plugin_list(self, plugin_manager=None):
"""Show dialog with a table of installed plugins and metadata."""
QtPluginTable(self._qt_window).exec_()
def _show_plugin_sorter(self):
"""Show dialog that allows users to sort the call order of plugins."""
plugin_sorter = QtPluginSorter(parent=self._qt_window)
dock_widget = self.add_dock_widget(plugin_sorter,
name='Plugin Sorter',
area="right")
plugin_sorter.finished.connect(dock_widget.close)
plugin_sorter.finished.connect(plugin_sorter.deleteLater)
plugin_sorter.finished.connect(dock_widget.deleteLater)
def _show_plugin_err_reporter(self):
"""Show dialog that allows users to review and report plugin errors."""
plugin_sorter = QtPluginErrReporter(parent=self._qt_window)
plugin_sorter.exec_()
def _add_help_menu(self):
"""Add 'Help' menu to app menubar."""
self.help_menu = self.main_menu.addMenu('&Help')
about_action = QAction("napari Info", self._qt_window)
about_action.setShortcut("Ctrl+/")
about_action.setStatusTip('About napari')
about_action.triggered.connect(
lambda e: QtAbout.showAbout(self.qt_viewer))
self.help_menu.addAction(about_action)
about_key_bindings = QAction("Show Key Bindings", self._qt_window)
about_key_bindings.setShortcut("Ctrl+Alt+/")
about_key_bindings.setShortcutContext(Qt.ApplicationShortcut)
about_key_bindings.setStatusTip('key_bindings')
about_key_bindings.triggered.connect(
self.qt_viewer.show_key_bindings_dialog)
self.help_menu.addAction(about_key_bindings)
def add_dock_widget(
self,
widget: QWidget,
*,
name: str = '',
area: str = 'bottom',
allowed_areas=None,
shortcut=None,
):
"""Convenience method to add a QDockWidget to the main window
Parameters
----------
widget : QWidget
`widget` will be added as QDockWidget's main widget.
name : str, optional
Name of dock widget to appear in window menu.
area : str
Side of the main window to which the new dock widget will be added.
Must be in {'left', 'right', 'top', 'bottom'}
allowed_areas : list[str], optional
Areas, relative to main window, that the widget is allowed dock.
Each item in list must be in {'left', 'right', 'top', 'bottom'}
By default, all areas are allowed.
shortcut : str, optional
Keyboard shortcut to appear in dropdown menu.
Returns
-------
dock_widget : QtViewerDockWidget
`dock_widget` that can pass viewer events.
"""
dock_widget = QtViewerDockWidget(
self.qt_viewer,
widget,
name=name,
area=area,
allowed_areas=allowed_areas,
shortcut=shortcut,
)
self._add_viewer_dock_widget(dock_widget)
return dock_widget
def _add_viewer_dock_widget(self, dock_widget: QtViewerDockWidget):
"""Add a QtViewerDockWidget to the main window
Parameters
----------
dock_widget : QtViewerDockWidget
`dock_widget` will be added to the main window.
"""
dock_widget.setParent(self._qt_window)
self._qt_window.addDockWidget(dock_widget.qt_area, dock_widget)
action = dock_widget.toggleViewAction()
action.setStatusTip(dock_widget.name)
action.setText(dock_widget.name)
if dock_widget.shortcut is not None:
action.setShortcut(dock_widget.shortcut)
self.window_menu.addAction(action)
def remove_dock_widget(self, widget):
"""Removes specified dock widget.
Parameters
----------
widget : QWidget | str
If widget == 'all', all docked widgets will be removed.
"""
if widget == 'all':
for dw in self._qt_window.findChildren(QDockWidget):
self._qt_window.removeDockWidget(dw)
else:
self._qt_window.removeDockWidget(widget)
def resize(self, width, height):
"""Resize the window.
Parameters
----------
width : int
Width in logical pixels.
height : int
Height in logical pixels.
"""
self._qt_window.resize(width, height)
def show(self):
"""Resize, show, and bring forward the window."""
self._qt_window.resize(self._qt_window.layout().sizeHint())
self._qt_window.show()
# Resize axis labels now that window is shown
self.qt_viewer.dims._resize_axis_labels()
# We want to call Window._qt_window.raise_() in every case *except*
# when instantiating a viewer within a gui_qt() context for the
# _first_ time within the Qt app's lifecycle.
#
# `app_name` will be "napari" iff the application was instantiated in
# gui_qt(). isActiveWindow() will be True if it is the second time a
# _qt_window has been created. See #732
app_name = QApplication.instance().applicationName()
if app_name != 'napari' or self._qt_window.isActiveWindow():
self._qt_window.raise_() # for macOS
self._qt_window.activateWindow() # for Windows
def _update_palette(self, event=None):
"""Update widget color palette."""
# set window styles which don't use the primary stylesheet
# FIXME: this is a problem with the stylesheet not using properties
palette = self.qt_viewer.viewer.palette
self._status_bar.setStyleSheet(
template(
'QStatusBar { background: {{ background }}; '
'color: {{ text }}; }',
**palette,
))
self._qt_center.setStyleSheet(
template('QWidget { background: {{ background }}; }', **palette))
self._qt_window.setStyleSheet(template(self.raw_stylesheet, **palette))
def _status_changed(self, event):
"""Update status bar.
Parameters
----------
event : napari.utils.event.Event
The napari event that triggered this method.
"""
self._status_bar.showMessage(event.text)
def _title_changed(self, event):
"""Update window title.
Parameters
----------
event : napari.utils.event.Event
The napari event that triggered this method.
"""
self._qt_window.setWindowTitle(event.text)
def _help_changed(self, event):
"""Update help message on status bar.
Parameters
----------
event : napari.utils.event.Event
The napari event that triggered this method.
"""
self._help.setText(event.text)
def _screenshot_dialog(self):
"""Save screenshot of current display with viewer, default .png"""
filename, _ = QFileDialog.getSaveFileName(
parent=self.qt_viewer,
caption='Save screenshot with viewer',
directory=self.qt_viewer._last_visited_dir, # home dir by default
filter=
"Image files (*.png *.bmp *.gif *.tif *.tiff)", # first one used by default
# jpg and jpeg not included as they don't support an alpha channel
)
if (filename != '') and (filename is not None):
# double check that an appropriate extension has been added as the
# filter option does not always add an extension on linux and windows
# see https://bugreports.qt.io/browse/QTBUG-27186
image_extensions = ('.bmp', '.gif', '.png', '.tif', '.tiff')
if not filename.endswith(image_extensions):
filename = filename + '.png'
self.screenshot(path=filename)
def screenshot(self, path=None):
"""Take currently displayed viewer and convert to an image array.
Parameters
----------
path : str
Filename for saving screenshot image.
Returns
-------
image : array
Numpy array of type ubyte and shape (h, w, 4). Index [0, 0] is the
upper-left corner of the rendered region.
"""
img = self._qt_window.grab().toImage()
if path is not None:
imsave(path, QImg2array(img)) # scikit-image imsave method
return QImg2array(img)
def close(self):
"""Close the viewer window and cleanup sub-widgets."""
# on some versions of Darwin, exiting while fullscreen seems to tickle
# some bug deep in NSWindow. This forces the fullscreen keybinding
# test to complete its draw cycle, then pop back out of fullscreen.
if self._qt_window.isFullScreen():
self._qt_window.showNormal()
for i in range(8):
time.sleep(0.1)
QApplication.processEvents()
self.qt_viewer.close()
self._qt_window.close()
del self._qt_window
def __init__(self):
super(XicamMainWindow, self).__init__()
# Set icon
self.setWindowIcon(QIcon(QPixmap(str(path("icons/xicam.gif")))))
# Set size and position
self.setGeometry(0, 0, 1000, 600)
frameGm = self.frameGeometry()
screen = QApplication.desktop().screenNumber(
QApplication.desktop().cursor().pos())
centerPoint = QApplication.desktop().screenGeometry(screen).center()
frameGm.moveCenter(centerPoint)
self.move(frameGm.topLeft())
# Init child widgets to None
self.topwidget = (self.leftwidget) = (self.rightwidget) = (
self.bottomwidget
) = self.lefttopwidget = self.righttopwidget = self.leftbottomwidget = self.rightbottomwidget = None
# Setup appearance
self.setWindowTitle("Xi-cam")
self.load_style()
# Attach an object to restore config when loaded
self._config_restorer = ConfigRestorer()
# Load plugins
pluginmanager.qt_is_safe = True
pluginmanager.initialize_types()
pluginmanager.collect_plugins()
pluginmanager.collect_user_plugins()
# Setup center/toolbar/statusbar/progressbar
self.pluginmodewidget = pluginModeWidget()
self.pluginmodewidget.sigSetStage.connect(self.setStage)
self.pluginmodewidget.sigSetGUIPlugin.connect(self.setGUIPlugin)
self.addToolBar(self.pluginmodewidget)
self.setStatusBar(QStatusBar(self))
msg.progressbar = QProgressBar(self)
msg.progressbar.hide()
msg.statusbar = self.statusBar()
self.statusBar().addPermanentWidget(msg.progressbar)
self.setCentralWidget(QStackedWidget())
# NOTE: CentralWidgets are force-deleted when replaced, even if the object is still referenced;
# To avoid this, a QStackedWidget is used for the central widget.
# Setup menubar
menubar = DebuggableMenuBar()
self.setMenuBar(menubar)
file = QMenu("&File", parent=menubar)
plugins = QMenu("&Plugins", parent=menubar)
menubar.addMenu(file)
file.addAction("Se&ttings",
self.showSettings,
shortcut=QKeySequence(Qt.CTRL + Qt.ALT + Qt.Key_S))
file.addAction("E&xit", self.close)
menubar.addMenu(plugins)
plugins.addAction("Open User &Plugin Directory",
self.openUserPluginDir,
shortcut=QKeySequence(Qt.CTRL + Qt.ALT + Qt.Key_P))
# Set up help
help = QMenu("&Help", parent=menubar)
documentation_link = QUrl("https://xi-cam.readthedocs.io/en/latest/")
help.addAction("Xi-CAM &Help",
lambda: QDesktopServices.openUrl(documentation_link))
slack_link = QUrl("https://nikea.slack.com")
help.addAction("Chat on &Slack",
lambda: QDesktopServices.openUrl(slack_link))
help.addSeparator()
about_title = "About Xi-CAM"
version_text = f"""Version: <strong>{version.get_versions()['version']}</strong>"""
copyright_text = f"""<small>Copyright (c) 2016, The Regents of the University of California, \
through Lawrence Berkeley National Laboratory \
(subject to receipt of any required approvals from the U.S. Dept. of Energy). \
All rights reserved.</small>"""
funding_text = f"""Funding for this research was provided by: \
Lawrence Berkeley National Laboratory (grant No. TReXS LDRD to AH); \
US Department of Energy (award No. Early Career Award to AH; \
contract No. DE-SC0012704; contract No. DE-AC02-06CH11357; \
contract No. DE-AC02-76SF00515; contract No. DE-AC02-05CH11231); \
Center for Advanced Mathematics in Energy Research Applications; \
Light Source Directors Data Solution Task Force Pilot Project."""
about_text = version_text + "<br><br>" + funding_text + "<br><hr>" + copyright_text
about_box = QMessageBox(QMessageBox.NoIcon, about_title, about_text)
about_box.setTextFormat(Qt.RichText)
about_box.setWindowModality(Qt.NonModal)
help.addAction("&About Xi-CAM", lambda: about_box.show())
help.addSeparator()
help.addAction(QWhatsThis.createAction(help))
menubar.addMenu(help)
# Initialize layout with first plugin
self._currentGUIPlugin = None
self.build_layout()
# self._currentGUIPlugin = pluginmanager.getPluginsOfCategory("GUIPlugin")[0]
self.populate_layout()
# Make F key bindings
fkeys = [
Qt.Key_F1,
Qt.Key_F2,
Qt.Key_F3,
Qt.Key_F4,
Qt.Key_F5,
Qt.Key_F6,
Qt.Key_F7,
Qt.Key_F8,
Qt.Key_F9,
Qt.Key_F10,
Qt.Key_F11,
Qt.Key_F12,
]
self.Fshortcuts = [QShortcut(QKeySequence(key), self) for key in fkeys]
for i in range(12):
self.Fshortcuts[i].activated.connect(partial(self.setStage, i))
self.readSettings()
# Wireup default widgets
get_default_stage()["left"].sigOpen.connect(self.open)
get_default_stage()["left"].sigOpen.connect(print)
get_default_stage()["left"].sigPreview.connect(
get_default_stage()["lefttop"].preview)
def __init__(self):
super(XicamMainWindow, self).__init__()
# Set icon
self.setWindowIcon(QIcon(QPixmap(str(path("icons/xicam.gif")))))
# Set size and position
self.setGeometry(0, 0, 1000, 600)
frameGm = self.frameGeometry()
screen = QApplication.desktop().screenNumber(
QApplication.desktop().cursor().pos())
centerPoint = QApplication.desktop().screenGeometry(screen).center()
frameGm.moveCenter(centerPoint)
self.move(frameGm.topLeft())
# Init child widgets to None
self.topwidget = (self.leftwidget) = (self.rightwidget) = (
self.bottomwidget
) = self.lefttopwidget = self.righttopwidget = self.leftbottomwidget = self.rightbottomwidget = None
# Setup appearance
self.setWindowTitle("Xi-cam")
self._configdialog = ConfigDialog()
# Load plugins
pluginmanager.collect_plugins()
# Setup center/toolbar/statusbar/progressbar
self.pluginmodewidget = pluginModeWidget()
self.pluginmodewidget.sigSetStage.connect(self.setStage)
self.pluginmodewidget.sigSetGUIPlugin.connect(self.setGUIPlugin)
self.addToolBar(self.pluginmodewidget)
self.setStatusBar(QStatusBar(self))
msg.progressbar = QProgressBar(self)
msg.progressbar.hide()
msg.statusbar = self.statusBar()
self.statusBar().addPermanentWidget(msg.progressbar)
self.setCentralWidget(QStackedWidget())
# NOTE: CentralWidgets are force-deleted when replaced, even if the object is still referenced;
# To avoid this, a QStackedWidget is used for the central widget.
# Setup menubar
menubar = DebuggableMenuBar()
self.setMenuBar(menubar)
file = QMenu("&File", parent=menubar)
menubar.addMenu(file)
file.addAction("Se&ttings",
self.showSettings,
shortcut=QKeySequence(Qt.CTRL + Qt.ALT + Qt.Key_S))
file.addAction("E&xit", self.close)
help = QMenu("&Help", parent=menubar)
menubar.addMenu(help)
# Initialize layout with first plugin
self._currentGUIPlugin = None
self.build_layout()
# self._currentGUIPlugin = pluginmanager.getPluginsOfCategory("GUIPlugin")[0]
self.populate_layout()
# Make F key bindings
fkeys = [
Qt.Key_F1,
Qt.Key_F2,
Qt.Key_F3,
Qt.Key_F4,
Qt.Key_F5,
Qt.Key_F6,
Qt.Key_F7,
Qt.Key_F8,
Qt.Key_F9,
Qt.Key_F10,
Qt.Key_F11,
Qt.Key_F12,
]
self.Fshortcuts = [QShortcut(QKeySequence(key), self) for key in fkeys]
for i in range(12):
self.Fshortcuts[i].activated.connect(partial(self.setStage, i))
self.readSettings()
# Wireup default widgets
defaultstage["left"].sigOpen.connect(self.open)
defaultstage["left"].sigOpen.connect(print)
defaultstage["left"].sigPreview.connect(
defaultstage["lefttop"].preview)
class SliceViewerDataView(QWidget):
"""The view for the data portion of the sliceviewer"""
def __init__(self, presenter: IDataViewSubscriber, dims_info, can_normalise, parent=None, conf=None):
super().__init__(parent)
self.presenter = presenter
self.image = None
self.line_plots_active = False
self.can_normalise = can_normalise
self.nonortho_transform = None
self.conf = conf
self._line_plots = None
self._image_info_tracker = None
self._region_selection_on = False
self._orig_lims = None
# Dimension widget
self.dimensions_layout = QGridLayout()
self.dimensions = DimensionWidget(dims_info, parent=self)
self.dimensions.dimensionsChanged.connect(self.presenter.dimensions_changed)
self.dimensions.valueChanged.connect(self.presenter.slicepoint_changed)
self.dimensions_layout.addWidget(self.dimensions, 1, 0, 1, 1)
self.colorbar_layout = QVBoxLayout()
self.colorbar_layout.setContentsMargins(0, 0, 0, 0)
self.colorbar_layout.setSpacing(0)
self.image_info_widget = ImageInfoWidget(self)
self.image_info_widget.setToolTip("Information about the selected pixel")
self.track_cursor = QCheckBox("Track Cursor", self)
self.track_cursor.setToolTip(
"Update the image readout table when the cursor is over the plot. "
"If unticked the table will update only when the plot is clicked")
self.dimensions_layout.setHorizontalSpacing(10)
self.dimensions_layout.addWidget(self.track_cursor, 0, 1, Qt.AlignRight)
self.dimensions_layout.addWidget(self.image_info_widget, 1, 1)
self.track_cursor.setChecked(True)
self.track_cursor.stateChanged.connect(self.on_track_cursor_state_change)
# normalization options
if can_normalise:
self.norm_label = QLabel("Normalization")
self.colorbar_layout.addWidget(self.norm_label)
self.norm_opts = QComboBox()
self.norm_opts.addItems(["None", "By bin width"])
self.norm_opts.setToolTip("Normalization options")
self.colorbar_layout.addWidget(self.norm_opts)
# MPL figure + colorbar
self.fig = Figure()
self.ax = None
self.image = None
self._grid_on = False
self.fig.set_facecolor(self.palette().window().color().getRgbF())
self.canvas = SliceViewerCanvas(self.fig)
self.canvas.mpl_connect('button_release_event', self.mouse_release)
self.canvas.mpl_connect('button_press_event', self.presenter.canvas_clicked)
self.colorbar_label = QLabel("Colormap")
self.colorbar_layout.addWidget(self.colorbar_label)
norm_scale = self.get_default_scale_norm()
self.colorbar = ColorbarWidget(self, norm_scale)
self.colorbar.cmap.setToolTip("Colormap options")
self.colorbar.crev.setToolTip("Reverse colormap")
self.colorbar.norm.setToolTip("Colormap normalisation options")
self.colorbar.powerscale.setToolTip("Power colormap scale")
self.colorbar.cmax.setToolTip("Colormap maximum limit")
self.colorbar.cmin.setToolTip("Colormap minimum limit")
self.colorbar.autoscale.setToolTip("Automatically changes colormap limits when zooming on the plot")
self.colorbar_layout.addWidget(self.colorbar)
self.colorbar.colorbarChanged.connect(self.update_data_clim)
self.colorbar.scaleNormChanged.connect(self.scale_norm_changed)
# make width larger to fit image readout table
self.colorbar.setMaximumWidth(200)
# MPL toolbar
self.toolbar_layout = QHBoxLayout()
self.mpl_toolbar = SliceViewerNavigationToolbar(self.canvas, self, False)
self.mpl_toolbar.gridClicked.connect(self.toggle_grid)
self.mpl_toolbar.linePlotsClicked.connect(self.on_line_plots_toggle)
self.mpl_toolbar.regionSelectionClicked.connect(self.on_region_selection_toggle)
self.mpl_toolbar.homeClicked.connect(self.on_home_clicked)
self.mpl_toolbar.nonOrthogonalClicked.connect(self.on_non_orthogonal_axes_toggle)
self.mpl_toolbar.zoomPanClicked.connect(self.presenter.zoom_pan_clicked)
self.mpl_toolbar.zoomPanFinished.connect(self.on_data_limits_changed)
self.toolbar_layout.addWidget(self.mpl_toolbar)
# Status bar
self.status_bar = QStatusBar(parent=self)
self.status_bar.setStyleSheet('QStatusBar::item {border: None;}') # Hide spacers between button and label
self.status_bar_label = QLabel()
self.help_button = QToolButton()
self.help_button.setText("?")
self.status_bar.addWidget(self.help_button)
self.status_bar.addWidget(self.status_bar_label)
# layout
layout = QGridLayout(self)
layout.setSpacing(1)
layout.addLayout(self.dimensions_layout, 0, 0, 1, 2)
layout.addLayout(self.toolbar_layout, 1, 0, 1, 1)
layout.addLayout(self.colorbar_layout, 1, 1, 3, 1)
layout.addWidget(self.canvas, 2, 0, 1, 1)
layout.addWidget(self.status_bar, 3, 0, 1, 1)
layout.setRowStretch(2, 1)
@property
def grid_on(self):
return self._grid_on
@property
def line_plotter(self):
return self._line_plots
@property
def nonorthogonal_mode(self):
return self.nonortho_transform is not None
def create_axes_orthogonal(self, redraw_on_zoom=False):
"""Create a standard set of orthogonal axes
:param redraw_on_zoom: If True then when scroll zooming the canvas is redrawn immediately
"""
self.clear_figure()
self.nonortho_transform = None
self.ax = self.fig.add_subplot(111, projection='mantid')
self.enable_zoom_on_mouse_scroll(redraw_on_zoom)
if self.grid_on:
self.ax.grid(self.grid_on)
if self.line_plots_active:
self.add_line_plots()
self.plot_MDH = self.plot_MDH_orthogonal
self.canvas.draw_idle()
def create_axes_nonorthogonal(self, transform):
self.clear_figure()
self.set_nonorthogonal_transform(transform)
self.ax = CurveLinearSubPlot(self.fig,
1,
1,
1,
grid_helper=GridHelperCurveLinear(
(transform.tr, transform.inv_tr)))
# don't redraw on zoom as the data is rebinned and has to be redrawn again anyway
self.enable_zoom_on_mouse_scroll(redraw=False)
self.set_grid_on()
self.fig.add_subplot(self.ax)
self.plot_MDH = self.plot_MDH_nonorthogonal
self.canvas.draw_idle()
def enable_zoom_on_mouse_scroll(self, redraw):
"""Enable zoom on scroll the mouse wheel for the created axes
:param redraw: Pass through to redraw option in enable_zoom_on_scroll
"""
self.canvas.enable_zoom_on_scroll(self.ax,
redraw=redraw,
toolbar=self.mpl_toolbar,
callback=self.on_data_limits_changed)
def add_line_plots(self, toolcls, exporter):
"""Assuming line plots are currently disabled, enable them on the current figure
The image axes must have been created first.
:param toolcls: Use this class to handle creating the plots
:param exporter: Object defining methods to export cuts/roi
"""
if self.line_plots_active:
return
self.line_plots_active = True
self._line_plots = toolcls(LinePlots(self.ax, self.colorbar), exporter)
self.status_bar_label.setText(self._line_plots.status_message())
self.canvas.setFocus()
self.mpl_toolbar.set_action_checked(ToolItemText.LINEPLOTS, True, trigger=False)
def switch_line_plots_tool(self, toolcls, exporter):
"""Assuming line plots are currently enabled then switch the tool used to
generate the plot curves.
:param toolcls: Use this class to handle creating the plots
"""
if not self.line_plots_active:
return
# Keep the same set of line plots axes but swap the selection tool
plotter = self._line_plots.plotter
plotter.delete_line_plot_lines()
self._line_plots.disconnect()
self._line_plots = toolcls(plotter, exporter)
self.status_bar_label.setText(self._line_plots.status_message())
self.canvas.setFocus()
self.canvas.draw_idle()
def remove_line_plots(self):
"""Assuming line plots are currently enabled, remove them from the current figure
"""
if not self.line_plots_active:
return
self._line_plots.plotter.close()
self.status_bar_label.clear()
self._line_plots = None
self.line_plots_active = False
def plot_MDH_orthogonal(self, ws, **kwargs):
"""
clears the plot and creates a new one using a MDHistoWorkspace
"""
self.clear_image()
self.image = self.ax.imshow(ws,
origin='lower',
aspect='auto',
transpose=self.dimensions.transpose,
norm=self.colorbar.get_norm(),
**kwargs)
# ensure the axes data limits are updated to match the
# image. For example if the axes were zoomed and the
# swap dimensions was clicked we need to restore the
# appropriate extents to see the image in the correct place
extent = self.image.get_extent()
self.ax.set_xlim(extent[0], extent[1])
self.ax.set_ylim(extent[2], extent[3])
# Set the original data limits which get passed to the ImageInfoWidget so that
# the mouse projection to data space is correct for MDH workspaces when zoomed/changing slices
self._orig_lims = self.get_axes_limits()
self.on_track_cursor_state_change(self.track_cursor_checked())
self.draw_plot()
def plot_MDH_nonorthogonal(self, ws, **kwargs):
self.clear_image()
self.image = pcolormesh_nonorthogonal(self.ax,
ws,
self.nonortho_transform.tr,
transpose=self.dimensions.transpose,
norm=self.colorbar.get_norm(),
**kwargs)
self.on_track_cursor_state_change(self.track_cursor_checked())
# swapping dimensions in nonorthogonal mode currently resets back to the
# full data limits as the whole axes has been recreated so we don't have
# access to the original limits
# pcolormesh clears any grid that was previously visible
if self.grid_on:
self.ax.grid(self.grid_on)
self.draw_plot()
def plot_matrix(self, ws, **kwargs):
"""
clears the plot and creates a new one using a MatrixWorkspace keeping
the axes limits that have already been set
"""
# ensure view is correct if zoomed in while swapping dimensions
# compute required extent and just have resampling imshow deal with it
old_extent = None
if self.image is not None:
old_extent = self.image.get_extent()
if self.image.transpose != self.dimensions.transpose:
e1, e2, e3, e4 = old_extent
old_extent = e3, e4, e1, e2
self.clear_image()
self.image = self.ax.imshow(ws,
origin='lower',
aspect='auto',
interpolation='none',
transpose=self.dimensions.transpose,
norm=self.colorbar.get_norm(),
extent=old_extent,
**kwargs)
self.on_track_cursor_state_change(self.track_cursor_checked())
self.draw_plot()
def clear_image(self):
"""Removes any image from the axes"""
if self.image is not None:
if self.line_plots_active:
self._line_plots.plotter.delete_line_plot_lines()
self.image_info_widget.cursorAt(DBLMAX, DBLMAX, DBLMAX)
if hasattr(self.ax, "remove_artists_if"):
self.ax.remove_artists_if(lambda art: art == self.image)
else:
self.image.remove()
self.image = None
def clear_figure(self):
"""Removes everything from the figure"""
if self.line_plots_active:
self._line_plots.plotter.close()
self.line_plots_active = False
self.image = None
self.canvas.disable_zoom_on_scroll()
self.fig.clf()
self.ax = None
def draw_plot(self):
self.ax.set_title('')
self.canvas.draw()
if self.image:
self.colorbar.set_mappable(self.image)
self.colorbar.update_clim()
self.mpl_toolbar.update() # clear nav stack
if self.line_plots_active:
self._line_plots.plotter.delete_line_plot_lines()
self._line_plots.plotter.update_line_plot_labels()
def export_region(self, limits, cut):
"""
React to a region selection that should be exported
:param limits: 2-tuple of ((left, right), (bottom, top))
:param cut: A str denoting which cuts to export.
"""
self.presenter.export_region(limits, cut)
def update_plot_data(self, data):
"""
This just updates the plot data without creating a new plot. The extents
can change if the data has been rebinned.
"""
if self.nonortho_transform:
self.image.set_array(data.T.ravel())
else:
self.image.set_data(data.T)
self.colorbar.update_clim()
def track_cursor_checked(self):
return self.track_cursor.isChecked() if self.track_cursor else False
def on_track_cursor_state_change(self, state):
"""
Called to notify the current state of the track cursor box
"""
if self._image_info_tracker is not None:
self._image_info_tracker.disconnect()
if self._line_plots is not None and not self._region_selection_on:
self._line_plots.disconnect()
self._image_info_tracker = ImageInfoTracker(image=self.image,
transform=self.nonortho_transform,
do_transform=self.nonorthogonal_mode,
widget=self.image_info_widget,
cursor_transform=self._orig_lims)
if state:
self._image_info_tracker.connect()
if self._line_plots and not self._region_selection_on:
self._line_plots.connect()
else:
self._image_info_tracker.disconnect()
if self._line_plots and not self._region_selection_on:
self._line_plots.disconnect()
def on_home_clicked(self):
"""Reset the view to encompass all of the data"""
self.presenter.show_all_data_clicked()
def on_line_plots_toggle(self, state):
"""Switch state of the line plots"""
self.presenter.line_plots(state)
def on_region_selection_toggle(self, state):
"""Switch state of the region selection"""
self.presenter.region_selection(state)
self._region_selection_on = state
# If state is off and track cursor is on, make sure line plots are re-connected to move cursor
if not state and self.track_cursor_checked():
if self._line_plots:
self._line_plots.connect()
def on_non_orthogonal_axes_toggle(self, state):
"""
Switch state of the non-orthognal axes on/off
"""
self.presenter.nonorthogonal_axes(state)
def on_data_limits_changed(self):
"""
React to when the data limits have changed
"""
self.presenter.data_limits_changed()
def deactivate_and_disable_tool(self, tool_text):
"""Deactivate a tool as if the control had been pressed and disable the functionality"""
self.deactivate_tool(tool_text)
self.disable_tool_button(tool_text)
def activate_tool(self, tool_text):
"""Activate a given tool as if the control had been pressed"""
self.mpl_toolbar.set_action_checked(tool_text, True)
def deactivate_tool(self, tool_text):
"""Deactivate a given tool as if the tool button had been pressed"""
self.mpl_toolbar.set_action_checked(tool_text, False)
def enable_tool_button(self, tool_text):
"""Set a given tool button enabled so it can be interacted with"""
self.mpl_toolbar.set_action_enabled(tool_text, True)
def disable_tool_button(self, tool_text):
"""Set a given tool button disabled so it cannot be interacted with"""
self.mpl_toolbar.set_action_enabled(tool_text, False)
def get_axes_limits(self):
"""
Return the limits on the image axes transformed into the nonorthogonal frame if appropriate
"""
if self.image is None:
return None
else:
xlim, ylim = self.ax.get_xlim(), self.ax.get_ylim()
if self.nonorthogonal_mode:
inv_tr = self.nonortho_transform.inv_tr
# viewing axis y not aligned with plot axis
xmin_p, ymax_p = inv_tr(xlim[0], ylim[1])
xmax_p, ymin_p = inv_tr(xlim[1], ylim[0])
xlim, ylim = (xmin_p, xmax_p), (ymin_p, ymax_p)
return xlim, ylim
def get_full_extent(self):
"""
Return the full extent of image - only applicable for plots of matrix workspaces
"""
if self.image and isinstance(self.image, samplingimage.SamplingImage):
return self.image.get_full_extent()
else:
return None
def set_axes_limits(self, xlim, ylim):
"""
Set the view limits on the image axes to the given extents. Assume the
limits are in the orthogonal frame.
:param xlim: 2-tuple of (xmin, xmax)
:param ylim: 2-tuple of (ymin, ymax)
"""
self.ax.set_xlim(xlim)
self.ax.set_ylim(ylim)
def set_grid_on(self):
"""
If not visible sets the grid visibility
"""
if not self._grid_on:
self._grid_on = True
self.mpl_toolbar.set_action_checked(ToolItemText.GRID, state=self._grid_on)
def set_nonorthogonal_transform(self, transform):
"""
Set the transform for nonorthogonal axes mode
:param transform: An object with a tr method to transform from nonorthognal
coordinates to display coordinates
"""
self.nonortho_transform = transform
def show_temporary_status_message(self, msg, timeout_ms):
"""
Show a message in the status bar that disappears after a set period
:param msg: A str message to display
:param timeout_ms: Timeout in milliseconds to display the message for
"""
self.status_bar.showMessage(msg, timeout_ms)
def toggle_grid(self, state):
"""
Toggle the visibility of the grid on the axes
"""
self._grid_on = state
self.ax.grid(self._grid_on)
self.canvas.draw_idle()
def mouse_release(self, event):
if event.inaxes != self.ax:
return
self.canvas.setFocus()
if event.button == 1:
self._image_info_tracker.on_cursor_at(event.xdata, event.ydata)
if self.line_plots_active and not self._region_selection_on:
self._line_plots.on_cursor_at(event.xdata, event.ydata)
if event.button == 3:
self.on_home_clicked()
def deactivate_zoom_pan(self):
self.deactivate_tool(ToolItemText.PAN)
self.deactivate_tool(ToolItemText.ZOOM)
def update_data_clim(self):
self.image.set_clim(self.colorbar.colorbar.mappable.get_clim())
if self.line_plots_active:
self._line_plots.plotter.update_line_plot_limits()
self.canvas.draw_idle()
def set_normalization(self, ws, **kwargs):
normalize_by_bin_width, _ = get_normalize_by_bin_width(ws, self.ax, **kwargs)
is_normalized = normalize_by_bin_width or ws.isDistribution()
self.presenter.normalization = is_normalized
if is_normalized:
self.norm_opts.setCurrentIndex(1)
else:
self.norm_opts.setCurrentIndex(0)
def get_default_scale_norm(self):
scale = 'Linear'
if self.conf is None:
return scale
if self.conf.has(SCALENORM):
scale = self.conf.get(SCALENORM)
if scale == 'Power' and self.conf.has(POWERSCALE):
exponent = self.conf.get(POWERSCALE)
scale = (scale, exponent)
scale = "SymmetricLog10" if scale == 'Log' else scale
return scale
def scale_norm_changed(self):
if self.conf is None:
return
scale = self.colorbar.norm.currentText()
self.conf.set(SCALENORM, scale)
if scale == 'Power':
exponent = self.colorbar.powerscale_value
self.conf.set(POWERSCALE, exponent)
class PythonFileInterpreter(QWidget):
sig_editor_modified = Signal(bool)
sig_filename_modified = Signal(str)
sig_progress = Signal(int)
sig_exec_error = Signal(object)
sig_exec_success = Signal(object)
def __init__(self, font=None, content=None, filename=None,
parent=None):
"""
:param font: A reference to the font to be used by the editor. If not supplied use the system default
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
"""
super(PythonFileInterpreter, self).__init__(parent)
self.parent = parent
# layout
font = font if font is not None else QFont()
self.editor = CodeEditor("AlternateCSPython", font, self)
self.find_replace_dialog = None
self.status = QStatusBar(self)
self.layout = QVBoxLayout()
self.layout.setContentsMargins(0, 0, 0, 0)
self.layout.addWidget(self.editor)
self.layout.addWidget(self.status)
self.setLayout(self.layout)
self._setup_editor(content, filename)
self._presenter = PythonFileInterpreterPresenter(self, PythonCodeExecution(self.editor))
self.code_commenter = CodeCommenter(self.editor)
self.code_completer = CodeCompleter(self.editor, self._presenter.model.globals_ns)
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
self.setAttribute(Qt.WA_DeleteOnClose, True)
# Connect the model signals to the view's signals so they can be accessed from outside the MVP
self._presenter.model.sig_exec_error.connect(self.sig_exec_error)
self._presenter.model.sig_exec_success.connect(self.sig_exec_success)
# Re-populate the completion API after execution success
self._presenter.model.sig_exec_success.connect(self.code_completer.update_completion_api)
def closeEvent(self, event):
self.deleteLater()
if self.find_replace_dialog:
self.find_replace_dialog.close()
super(PythonFileInterpreter, self).closeEvent(event)
def show_find_replace_dialog(self):
if self.find_replace_dialog is None:
self.find_replace_dialog = EmbeddedFindReplaceDialog(self, self.editor)
self.layout.insertWidget(0, self.find_replace_dialog.view)
self.find_replace_dialog.show()
def hide_find_replace_dialog(self):
if self.find_replace_dialog is not None:
self.find_replace_dialog.hide()
@property
def filename(self):
return self.editor.fileName()
def confirm_close(self):
"""Confirm the widget can be closed. If the editor contents are modified then
a user can interject and cancel closing.
:return: True if closing was considered successful, false otherwise
"""
return self.save(prompt_for_confirmation=self.parent.confirm_on_save)
def abort(self):
self._presenter.req_abort()
def execute_async(self, ignore_selection=False):
return self._presenter.req_execute_async(ignore_selection)
def execute_async_blocking(self):
self._presenter.req_execute_async_blocking()
def save(self, prompt_for_confirmation=False, force_save=False):
if self.editor.isModified():
io = EditorIO(self.editor)
return io.save_if_required(prompt_for_confirmation, force_save)
else:
return True
def save_as(self):
io = EditorIO(self.editor)
new_filename = io.ask_for_filename()
if new_filename:
return io.write(save_as=new_filename), new_filename
else:
return False, None
def set_editor_readonly(self, ro):
self.editor.setReadOnly(ro)
def set_status_message(self, msg):
self.status.showMessage(msg)
def replace_tabs_with_spaces(self):
self.replace_text(TAB_CHAR, SPACE_CHAR * TAB_WIDTH)
def replace_text(self, match_text, replace_text):
if self.editor.selectedText() == '':
self.editor.selectAll()
new_text = self.editor.selectedText().replace(match_text, replace_text)
self.editor.replaceSelectedText(new_text)
def replace_spaces_with_tabs(self):
self.replace_text(SPACE_CHAR * TAB_WIDTH, TAB_CHAR)
def set_whitespace_visible(self):
self.editor.setEolVisibility(True)
self.editor.setWhitespaceVisibility(CodeEditor.WsVisible)
def set_whitespace_invisible(self):
self.editor.setEolVisibility(False)
self.editor.setWhitespaceVisibility(CodeEditor.WsInvisible)
def toggle_comment(self):
self.code_commenter.toggle_comment()
def _setup_editor(self, default_content, filename):
editor = self.editor
# Clear default QsciScintilla key bindings that we want to allow
# to be users of this class
self.clear_key_binding("Ctrl+/")
# use tabs not spaces for indentation
editor.setIndentationsUseTabs(False)
editor.setTabWidth(TAB_WIDTH)
# show current editing line but in a softer color
editor.setCaretLineBackgroundColor(CURRENTLINE_BKGD_COLOR)
editor.setCaretLineVisible(True)
# set a margin large enough for sensible file sizes < 1000 lines
# and the progress marker
font_metrics = QFontMetrics(self.font())
editor.setMarginWidth(1, font_metrics.averageCharWidth() * 3 + 20)
# fill with content if supplied and set source filename
if default_content is not None:
editor.setText(default_content)
if filename is not None:
editor.setFileName(filename)
# Default content does not count as a modification
editor.setModified(False)
def clear_key_binding(self, key_str):
"""Clear a keyboard shortcut bound to a Scintilla command"""
self.editor.clearKeyBinding(key_str)
class PythonFileInterpreter(QWidget):
sig_editor_modified = Signal(bool)
sig_filename_modified = Signal(str)
def __init__(self, content=None, filename=None, parent=None):
"""
:param content: An optional string of content to pass to the editor
:param filename: The file path where the content was read.
:param parent: An optional parent QWidget
"""
super(PythonFileInterpreter, self).__init__(parent)
# layout
self.editor = CodeEditor("AlternateCSPythonLexer", self)
self.status = QStatusBar(self)
layout = QVBoxLayout()
layout.addWidget(self.editor)
layout.addWidget(self.status)
self.setLayout(layout)
layout.setContentsMargins(0, 0, 0, 0)
self._setup_editor(content, filename)
self._presenter = PythonFileInterpreterPresenter(
self, PythonCodeExecution(content))
self.editor.modificationChanged.connect(self.sig_editor_modified)
self.editor.fileNameChanged.connect(self.sig_filename_modified)
@property
def filename(self):
return self.editor.fileName()
def confirm_close(self):
"""Confirm the widget can be closed. If the editor contents are modified then
a user can interject and cancel closing.
:return: True if closing was considered successful, false otherwise
"""
return self.save(confirm=True)
def abort(self):
self._presenter.req_abort()
def execute_async(self):
self._presenter.req_execute_async()
def save(self, confirm=False):
if self.editor.isModified():
io = EditorIO(self.editor)
return io.save_if_required(confirm)
else:
return True
def set_editor_readonly(self, ro):
self.editor.setReadOnly(ro)
def set_status_message(self, msg):
self.status.showMessage(msg)
def _setup_editor(self, default_content, filename):
editor = self.editor
# use tabs not spaces for indentation
editor.setIndentationsUseTabs(False)
editor.setTabWidth(TAB_WIDTH)
# show current editing line but in a softer color
editor.setCaretLineBackgroundColor(CURRENTLINE_BKGD_COLOR)
editor.setCaretLineVisible(True)
# set a margin large enough for sensible file sizes < 1000 lines
# and the progress marker
font_metrics = QFontMetrics(self.font())
editor.setMarginWidth(1, font_metrics.averageCharWidth() * 3 + 20)
# fill with content if supplied and set source filename
if default_content is not None:
editor.setText(default_content)
if filename is not None:
editor.setFileName(filename)
# Default content does not count as a modification
editor.setModified(False)
editor.enableAutoCompletion(CodeEditor.AcsAll)
def create_statusbar():
self.statusbar = QStatusBar(self)
self.statusbar.showMessage("Ready", 0)
def __init__(self, viewer, *, show: bool = True):
# Check there is a running app
# instance() returns the singleton instance if it exists, or None
app = QApplication.instance()
# if None, raise a RuntimeError with the appropriate message
if app is None:
message = (
"napari requires a Qt event loop to run. To create one, "
"try one of the following: \n"
" - use the `napari.gui_qt()` context manager. See "
"https://github.com/napari/napari/tree/master/examples for"
" usage examples.\n"
" - In IPython or a local Jupyter instance, use the "
"`%gui qt` magic command.\n"
" - Launch IPython with the option `--gui=qt`.\n"
" - (recommended) in your IPython configuration file, add"
" or uncomment the line `c.TerminalIPythonApp.gui = 'qt'`."
" Then, restart IPython."
)
raise RuntimeError(message)
if perf_config:
if perf_config.trace_qt_events:
from .tracing.qt_event_tracing import convert_app_for_tracing
# For tracing Qt events we need a special QApplication. If
# using `gui_qt` we already have the special one, and no
# conversion is done here. However when running inside
# IPython or Jupyter this is where we switch out the
# QApplication.
app = convert_app_for_tracing(app)
# Will patch based on config file.
perf_config.patch_callables()
_napari_app_id = getattr(
viewer,
"_napari_app_id",
'napari.napari.viewer.' + str(__version__),
)
if (
platform.system() == "Windows"
and not getattr(sys, 'frozen', False)
and _napari_app_id
):
import ctypes
ctypes.windll.shell32.SetCurrentProcessExplicitAppUserModelID(
_napari_app_id
)
logopath = os.path.join(
os.path.dirname(__file__), '..', 'resources', 'logo.png'
)
if getattr(viewer, "_napari_global_logo", True):
app = QApplication.instance()
app.setWindowIcon(QIcon(logopath))
# see docstring of `wait_for_workers_to_quit` for caveats on killing
# workers at shutdown.
app.aboutToQuit.connect(wait_for_workers_to_quit)
# Connect the Viewer and create the Main Window
self.qt_viewer = QtViewer(viewer)
self._qt_window = QMainWindow()
self._qt_window.setWindowIcon(QIcon(logopath))
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
# since we initialize canvas before window, we need to manually connect them again.
if self._qt_window.windowHandle() is not None:
self._qt_window.windowHandle().screenChanged.connect(
self.qt_viewer.canvas._backend.screen_changed
)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
if not os.getenv("DISABLE_ALL_PLUGINS"):
self._add_plugins_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette()
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(self._update_palette)
if perf.USE_PERFMON:
# Add DebugMenu and dockPerformance if using perfmon.
self._debug_menu = DebugMenu(self)
self._add_viewer_dock_widget(self.qt_viewer.dockPerformance)
else:
self._debug_menu = None
if show:
self.show()
class Window:
"""Application window that contains the menu bar and viewer.
Parameters
----------
viewer : napari.components.ViewerModel
Contained viewer widget.
Attributes
----------
file_menu : qtpy.QtWidgets.QMenu
File menu.
help_menu : qtpy.QtWidgets.QMenu
Help menu.
main_menu : qtpy.QtWidgets.QMainWindow.menuBar
Main menubar.
qt_viewer : QtViewer
Contained viewer widget.
view_menu : qtpy.QtWidgets.QMenu
View menu.
window_menu : qtpy.QtWidgets.QMenu
Window menu.
"""
raw_stylesheet = get_stylesheet()
def __init__(self, viewer, *, show: bool = True):
# Check there is a running app
# instance() returns the singleton instance if it exists, or None
app = QApplication.instance()
# if None, raise a RuntimeError with the appropriate message
if app is None:
message = (
"napari requires a Qt event loop to run. To create one, "
"try one of the following: \n"
" - use the `napari.gui_qt()` context manager. See "
"https://github.com/napari/napari/tree/master/examples for"
" usage examples.\n"
" - In IPython or a local Jupyter instance, use the "
"`%gui qt` magic command.\n"
" - Launch IPython with the option `--gui=qt`.\n"
" - (recommended) in your IPython configuration file, add"
" or uncomment the line `c.TerminalIPythonApp.gui = 'qt'`."
" Then, restart IPython."
)
raise RuntimeError(message)
if perf_config:
if perf_config.trace_qt_events:
from .tracing.qt_event_tracing import convert_app_for_tracing
# For tracing Qt events we need a special QApplication. If
# using `gui_qt` we already have the special one, and no
# conversion is done here. However when running inside
# IPython or Jupyter this is where we switch out the
# QApplication.
app = convert_app_for_tracing(app)
# Will patch based on config file.
perf_config.patch_callables()
_napari_app_id = getattr(
viewer,
"_napari_app_id",
'napari.napari.viewer.' + str(__version__),
)
if (
platform.system() == "Windows"
and not getattr(sys, 'frozen', False)
and _napari_app_id
):
import ctypes
ctypes.windll.shell32.SetCurrentProcessExplicitAppUserModelID(
_napari_app_id
)
logopath = os.path.join(
os.path.dirname(__file__), '..', 'resources', 'logo.png'
)
if getattr(viewer, "_napari_global_logo", True):
app = QApplication.instance()
app.setWindowIcon(QIcon(logopath))
# see docstring of `wait_for_workers_to_quit` for caveats on killing
# workers at shutdown.
app.aboutToQuit.connect(wait_for_workers_to_quit)
# Connect the Viewer and create the Main Window
self.qt_viewer = QtViewer(viewer)
self._qt_window = QMainWindow()
self._qt_window.setWindowIcon(QIcon(logopath))
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
# since we initialize canvas before window, we need to manually connect them again.
if self._qt_window.windowHandle() is not None:
self._qt_window.windowHandle().screenChanged.connect(
self.qt_viewer.canvas._backend.screen_changed
)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
if not os.getenv("DISABLE_ALL_PLUGINS"):
self._add_plugins_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette()
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(self._update_palette)
if perf.USE_PERFMON:
# Add DebugMenu and dockPerformance if using perfmon.
self._debug_menu = DebugMenu(self)
self._add_viewer_dock_widget(self.qt_viewer.dockPerformance)
else:
self._debug_menu = None
if show:
self.show()
def _add_menubar(self):
"""Add menubar to napari app."""
self.main_menu = self._qt_window.menuBar()
# Menubar shortcuts are only active when the menubar is visible.
# Therefore, we set a global shortcut not associated with the menubar
# to toggle visibility, *but*, in order to not shadow the menubar
# shortcut, we disable it, and only enable it when the menubar is
# hidden. See this stackoverflow link for details:
# https://stackoverflow.com/questions/50537642/how-to-keep-the-shortcuts-of-a-hidden-widget-in-pyqt5
self._main_menu_shortcut = QShortcut(
QKeySequence('Ctrl+M'), self._qt_window
)
self._main_menu_shortcut.activated.connect(
self._toggle_menubar_visible
)
self._main_menu_shortcut.setEnabled(False)
def _toggle_menubar_visible(self):
"""Toggle visibility of app menubar.
This function also disables or enables a global keyboard shortcut to
show the menubar, since menubar shortcuts are only available while the
menubar is visible.
"""
if self.main_menu.isVisible():
self.main_menu.setVisible(False)
self._main_menu_shortcut.setEnabled(True)
else:
self.main_menu.setVisible(True)
self._main_menu_shortcut.setEnabled(False)
def _add_file_menu(self):
"""Add 'File' menu to app menubar."""
open_images = QAction('Open File(s)...', self._qt_window)
open_images.setShortcut('Ctrl+O')
open_images.setStatusTip('Open file(s)')
open_images.triggered.connect(self.qt_viewer._open_files_dialog)
open_stack = QAction('Open Files as Stack...', self._qt_window)
open_stack.setShortcut('Ctrl+Alt+O')
open_stack.setStatusTip('Open files')
open_stack.triggered.connect(
self.qt_viewer._open_files_dialog_as_stack_dialog
)
open_folder = QAction('Open Folder...', self._qt_window)
open_folder.setShortcut('Ctrl+Shift+O')
open_folder.setStatusTip('Open a folder')
open_folder.triggered.connect(self.qt_viewer._open_folder_dialog)
save_selected_layers = QAction(
'Save Selected Layer(s)...', self._qt_window
)
save_selected_layers.setShortcut('Ctrl+S')
save_selected_layers.setStatusTip('Save selected layers')
save_selected_layers.triggered.connect(
lambda: self.qt_viewer._save_layers_dialog(selected=True)
)
save_all_layers = QAction('Save All Layers...', self._qt_window)
save_all_layers.setShortcut('Ctrl+Shift+S')
save_all_layers.setStatusTip('Save all layers')
save_all_layers.triggered.connect(
lambda: self.qt_viewer._save_layers_dialog(selected=False)
)
screenshot = QAction('Save Screenshot...', self._qt_window)
screenshot.setShortcut('Alt+S')
screenshot.setStatusTip(
'Save screenshot of current display, default .png'
)
screenshot.triggered.connect(self.qt_viewer._screenshot_dialog)
screenshot_wv = QAction(
'Save Screenshot with Viewer...', self._qt_window
)
screenshot_wv.setShortcut('Alt+Shift+S')
screenshot_wv.setStatusTip(
'Save screenshot of current display with the viewer, default .png'
)
screenshot_wv.triggered.connect(self._screenshot_dialog)
# OS X will rename this to Quit and put it in the app menu.
exitAction = QAction('Exit', self._qt_window)
exitAction.setShortcut('Ctrl+Q')
exitAction.setMenuRole(QAction.QuitRole)
def handle_exit():
# if the event loop was started in gui_qt() then the app will be
# named 'napari'. Since the Qapp was started by us, just close it.
if QApplication.applicationName() == 'napari':
QApplication.closeAllWindows()
QApplication.quit()
# otherwise, something else created the QApp before us (such as
# %gui qt IPython magic). If we quit the app in this case, then
# *later* attempts to instantiate a napari viewer won't work until
# the event loop is restarted with app.exec_(). So rather than
# quit just close all the windows (and clear our app icon).
else:
QApplication.setWindowIcon(QIcon())
self.close()
if perf.USE_PERFMON:
# Write trace file before exit, if we were writing one.
# Is there a better place to make sure this is done on exit?
perf.timers.stop_trace_file()
_stop_monitor()
exitAction.triggered.connect(handle_exit)
self.file_menu = self.main_menu.addMenu('&File')
self.file_menu.addAction(open_images)
self.file_menu.addAction(open_stack)
self.file_menu.addAction(open_folder)
self.file_menu.addSeparator()
self.file_menu.addAction(save_selected_layers)
self.file_menu.addAction(save_all_layers)
self.file_menu.addAction(screenshot)
self.file_menu.addAction(screenshot_wv)
self.file_menu.addSeparator()
self.file_menu.addAction(exitAction)
def _add_view_menu(self):
"""Add 'View' menu to app menubar."""
toggle_visible = QAction('Toggle Menubar Visibility', self._qt_window)
toggle_visible.setShortcut('Ctrl+M')
toggle_visible.setStatusTip('Hide Menubar')
toggle_visible.triggered.connect(self._toggle_menubar_visible)
toggle_theme = QAction('Toggle Theme', self._qt_window)
toggle_theme.setShortcut('Ctrl+Shift+T')
toggle_theme.setStatusTip('Toggle theme')
toggle_theme.triggered.connect(self.qt_viewer.viewer._toggle_theme)
toggle_fullscreen = QAction('Toggle Full Screen', self._qt_window)
toggle_fullscreen.setShortcut('Ctrl+F')
toggle_fullscreen.setStatusTip('Toggle full screen')
toggle_fullscreen.triggered.connect(self._toggle_fullscreen)
toggle_play = QAction('Toggle Play', self._qt_window)
toggle_play.triggered.connect(self._toggle_play)
toggle_play.setShortcut('Ctrl+Alt+P')
toggle_play.setStatusTip('Toggle Play')
self.view_menu = self.main_menu.addMenu('&View')
self.view_menu.addAction(toggle_fullscreen)
self.view_menu.addAction(toggle_visible)
self.view_menu.addAction(toggle_theme)
self.view_menu.addAction(toggle_play)
self.view_menu.addSeparator()
# Add octree actions.
if config.async_octree:
toggle_outline = QAction('Toggle Chunk Outlines', self._qt_window)
toggle_outline.triggered.connect(
self.qt_viewer._toggle_chunk_outlines
)
toggle_outline.setShortcut('Ctrl+Alt+O')
toggle_outline.setStatusTip('Toggle Chunk Outlines')
self.view_menu.addAction(toggle_outline)
# Add axes menu
axes_menu = QMenu('Axes', parent=self._qt_window)
axes_visible_action = QAction(
'Visible',
parent=self._qt_window,
checkable=True,
checked=self.qt_viewer.viewer.axes.visible,
)
axes_visible_action.triggered.connect(self._toggle_axes_visible)
axes_colored_action = QAction(
'Colored',
parent=self._qt_window,
checkable=True,
checked=self.qt_viewer.viewer.axes.colored,
)
axes_colored_action.triggered.connect(self._toggle_axes_colored)
axes_labels_action = QAction(
'Labels',
parent=self._qt_window,
checkable=True,
checked=self.qt_viewer.viewer.axes.labels,
)
axes_labels_action.triggered.connect(self._toggle_axes_labels)
axes_dashed_action = QAction(
'Dashed',
parent=self._qt_window,
checkable=True,
checked=self.qt_viewer.viewer.axes.dashed,
)
axes_dashed_action.triggered.connect(self._toggle_axes_dashed)
axes_arrows_action = QAction(
'Arrows',
parent=self._qt_window,
checkable=True,
checked=self.qt_viewer.viewer.axes.arrows,
)
axes_arrows_action.triggered.connect(self._toggle_axes_arrows)
axes_menu.addAction(axes_visible_action)
axes_menu.addAction(axes_colored_action)
axes_menu.addAction(axes_labels_action)
axes_menu.addAction(axes_dashed_action)
axes_menu.addAction(axes_arrows_action)
self.view_menu.addMenu(axes_menu)
# Add scale bar menu
scale_bar_menu = QMenu('Scale Bar', parent=self._qt_window)
scale_bar_visible_action = QAction(
'Visible',
parent=self._qt_window,
checkable=True,
checked=self.qt_viewer.viewer.scale_bar.visible,
)
scale_bar_visible_action.triggered.connect(
self._toggle_scale_bar_visible
)
scale_bar_colored_action = QAction(
'Colored',
parent=self._qt_window,
checkable=True,
checked=self.qt_viewer.viewer.scale_bar.colored,
)
scale_bar_colored_action.triggered.connect(
self._toggle_scale_bar_colored
)
scale_bar_ticks_action = QAction(
'Ticks',
parent=self._qt_window,
checkable=True,
checked=self.qt_viewer.viewer.scale_bar.ticks,
)
scale_bar_ticks_action.triggered.connect(self._toggle_scale_bar_ticks)
scale_bar_menu.addAction(scale_bar_visible_action)
scale_bar_menu.addAction(scale_bar_colored_action)
scale_bar_menu.addAction(scale_bar_ticks_action)
self.view_menu.addMenu(scale_bar_menu)
self.view_menu.addSeparator()
def _add_window_menu(self):
"""Add 'Window' menu to app menubar."""
exit_action = QAction("Close Window", self._qt_window)
exit_action.setShortcut("Ctrl+W")
exit_action.setStatusTip('Close napari window')
exit_action.triggered.connect(self._qt_window.close)
self.window_menu = self.main_menu.addMenu('&Window')
self.window_menu.addAction(exit_action)
def _add_plugins_menu(self):
"""Add 'Plugins' menu to app menubar."""
self.plugins_menu = self.main_menu.addMenu('&Plugins')
pip_install_action = QAction(
"Install/Uninstall Package(s)...", self._qt_window
)
pip_install_action.triggered.connect(self._show_plugin_install_dialog)
self.plugins_menu.addAction(pip_install_action)
order_plugin_action = QAction("Plugin Call Order...", self._qt_window)
order_plugin_action.setStatusTip('Change call order for plugins')
order_plugin_action.triggered.connect(self._show_plugin_sorter)
self.plugins_menu.addAction(order_plugin_action)
report_plugin_action = QAction("Plugin Errors...", self._qt_window)
report_plugin_action.setStatusTip(
'Review stack traces for plugin exceptions and notify developers'
)
report_plugin_action.triggered.connect(self._show_plugin_err_reporter)
self.plugins_menu.addAction(report_plugin_action)
def _show_plugin_sorter(self):
"""Show dialog that allows users to sort the call order of plugins."""
plugin_sorter = QtPluginSorter(parent=self._qt_window)
if hasattr(self, 'plugin_sorter_widget'):
self.plugin_sorter_widget.show()
else:
self.plugin_sorter_widget = self.add_dock_widget(
plugin_sorter, name='Plugin Sorter', area="right"
)
def _show_plugin_install_dialog(self):
"""Show dialog that allows users to sort the call order of plugins."""
self.plugin_dialog = QtPluginDialog(self._qt_window)
self.plugin_dialog.exec_()
def _show_plugin_err_reporter(self):
"""Show dialog that allows users to review and report plugin errors."""
QtPluginErrReporter(parent=self._qt_window).exec_()
def _add_help_menu(self):
"""Add 'Help' menu to app menubar."""
self.help_menu = self.main_menu.addMenu('&Help')
about_action = QAction("napari Info", self._qt_window)
about_action.setShortcut("Ctrl+/")
about_action.setStatusTip('About napari')
about_action.triggered.connect(
lambda e: QtAbout.showAbout(self.qt_viewer)
)
self.help_menu.addAction(about_action)
about_key_bindings = QAction("Show Key Bindings", self._qt_window)
about_key_bindings.setShortcut("Ctrl+Alt+/")
about_key_bindings.setShortcutContext(Qt.ApplicationShortcut)
about_key_bindings.setStatusTip('key_bindings')
about_key_bindings.triggered.connect(
self.qt_viewer.show_key_bindings_dialog
)
self.help_menu.addAction(about_key_bindings)
def _toggle_scale_bar_visible(self, state):
self.qt_viewer.viewer.scale_bar.visible = state
def _toggle_scale_bar_colored(self, state):
self.qt_viewer.viewer.scale_bar.colored = state
def _toggle_scale_bar_ticks(self, state):
self.qt_viewer.viewer.scale_bar.ticks = state
def _toggle_axes_visible(self, state):
self.qt_viewer.viewer.axes.visible = state
def _toggle_axes_colored(self, state):
self.qt_viewer.viewer.axes.colored = state
def _toggle_axes_labels(self, state):
self.qt_viewer.viewer.axes.labels = state
def _toggle_axes_dashed(self, state):
self.qt_viewer.viewer.axes.dashed = state
def _toggle_axes_arrows(self, state):
self.qt_viewer.viewer.axes.arrows = state
def _toggle_fullscreen(self, event):
"""Toggle fullscreen mode."""
if self._qt_window.isFullScreen():
self._qt_window.showNormal()
else:
self._qt_window.showFullScreen()
def _toggle_play(self, state):
"""Toggle play."""
if self.qt_viewer.dims.is_playing:
self.qt_viewer.dims.stop()
else:
axis = self.qt_viewer.viewer.dims.last_used or 0
self.qt_viewer.dims.play(axis)
def add_dock_widget(
self,
widget: QWidget,
*,
name: str = '',
area: str = 'bottom',
allowed_areas=None,
shortcut=None,
):
"""Convenience method to add a QDockWidget to the main window
Parameters
----------
widget : QWidget
`widget` will be added as QDockWidget's main widget.
name : str, optional
Name of dock widget to appear in window menu.
area : str
Side of the main window to which the new dock widget will be added.
Must be in {'left', 'right', 'top', 'bottom'}
allowed_areas : list[str], optional
Areas, relative to main window, that the widget is allowed dock.
Each item in list must be in {'left', 'right', 'top', 'bottom'}
By default, all areas are allowed.
shortcut : str, optional
Keyboard shortcut to appear in dropdown menu.
Returns
-------
dock_widget : QtViewerDockWidget
`dock_widget` that can pass viewer events.
"""
dock_widget = QtViewerDockWidget(
self.qt_viewer,
widget,
name=name,
area=area,
allowed_areas=allowed_areas,
shortcut=shortcut,
)
self._add_viewer_dock_widget(dock_widget)
return dock_widget
def _add_viewer_dock_widget(self, dock_widget: QtViewerDockWidget):
"""Add a QtViewerDockWidget to the main window
Parameters
----------
dock_widget : QtViewerDockWidget
`dock_widget` will be added to the main window.
"""
dock_widget.setParent(self._qt_window)
self._qt_window.addDockWidget(dock_widget.qt_area, dock_widget)
action = dock_widget.toggleViewAction()
action.setStatusTip(dock_widget.name)
action.setText(dock_widget.name)
if dock_widget.shortcut is not None:
action.setShortcut(dock_widget.shortcut)
self.window_menu.addAction(action)
def remove_dock_widget(self, widget):
"""Removes specified dock widget.
Parameters
----------
widget : QWidget | str
If widget == 'all', all docked widgets will be removed.
"""
if widget == 'all':
for dw in self._qt_window.findChildren(QDockWidget):
self._qt_window.removeDockWidget(dw)
else:
self._qt_window.removeDockWidget(widget)
def resize(self, width, height):
"""Resize the window.
Parameters
----------
width : int
Width in logical pixels.
height : int
Height in logical pixels.
"""
self._qt_window.resize(width, height)
def show(self):
"""Resize, show, and bring forward the window."""
self._qt_window.resize(self._qt_window.layout().sizeHint())
self._qt_window.show()
# Resize axis labels now that window is shown
self.qt_viewer.dims._resize_axis_labels()
# We want to bring the viewer to the front when
# A) it is our own (gui_qt) event loop OR we are running in jupyter
# B) it is not the first time a QMainWindow is being created
# `app_name` will be "napari" iff the application was instantiated in
# gui_qt(). isActiveWindow() will be True if it is the second time a
# _qt_window has been created.
# See #721, #732, #735, #795, #1594
app_name = QApplication.instance().applicationName()
if (
app_name == 'napari' or in_jupyter()
) and self._qt_window.isActiveWindow():
self.activate()
def activate(self):
"""Make the viewer the currently active window."""
self._qt_window.raise_() # for macOS
self._qt_window.activateWindow() # for Windows
def _update_palette(self, event=None):
"""Update widget color palette."""
# set window styles which don't use the primary stylesheet
# FIXME: this is a problem with the stylesheet not using properties
palette = self.qt_viewer.viewer.palette
self._status_bar.setStyleSheet(
template(
'QStatusBar { background: {{ background }}; '
'color: {{ text }}; }',
**palette,
)
)
self._qt_center.setStyleSheet(
template('QWidget { background: {{ background }}; }', **palette)
)
self._qt_window.setStyleSheet(template(self.raw_stylesheet, **palette))
def _status_changed(self, event):
"""Update status bar.
Parameters
----------
event : napari.utils.event.Event
The napari event that triggered this method.
"""
self._status_bar.showMessage(event.text)
def _title_changed(self, event):
"""Update window title.
Parameters
----------
event : napari.utils.event.Event
The napari event that triggered this method.
"""
self._qt_window.setWindowTitle(event.text)
def _help_changed(self, event):
"""Update help message on status bar.
Parameters
----------
event : napari.utils.event.Event
The napari event that triggered this method.
"""
self._help.setText(event.text)
def _screenshot_dialog(self):
"""Save screenshot of current display with viewer, default .png"""
dial = ScreenshotDialog(
self.screenshot, self.qt_viewer, self.qt_viewer._last_visited_dir
)
if dial.exec_():
self._last_visited_dir = os.path.dirname(dial.selectedFiles()[0])
def screenshot(self, path=None):
"""Take currently displayed viewer and convert to an image array.
Parameters
----------
path : str
Filename for saving screenshot image.
Returns
-------
image : array
Numpy array of type ubyte and shape (h, w, 4). Index [0, 0] is the
upper-left corner of the rendered region.
"""
img = self._qt_window.grab().toImage()
if path is not None:
imsave(path, QImg2array(img)) # scikit-image imsave method
return QImg2array(img)
def close(self):
"""Close the viewer window and cleanup sub-widgets."""
# Someone is closing us twice? Only try to delete self._qt_window
# if we still have one.
if hasattr(self, '_qt_window'):
self._delete_qt_window()
def _delete_qt_window(self):
"""Delete our self._qt_window."""
# On some versions of Darwin, exiting while fullscreen seems to tickle
# some bug deep in NSWindow. This forces the fullscreen keybinding
# test to complete its draw cycle, then pop back out of fullscreen.
if self._qt_window.isFullScreen():
self._qt_window.showNormal()
for i in range(8):
time.sleep(0.1)
QApplication.processEvents()
self.qt_viewer.close()
self._qt_window.close()
del self._qt_window
def main():
"""Execute QDarkStyle example."""
parser = argparse.ArgumentParser(
description=__doc__,
formatter_class=argparse.RawDescriptionHelpFormatter)
parser.add_argument(
'--qt_from',
default='qtpy',
type=str,
choices=[
'pyqt5', 'pyqt', 'pyside2', 'pyside', 'qtpy', 'pyqtgraph', 'qt.py'
],
help=
"Choose which binding and/or abstraction is to be used to run the example."
)
parser.add_argument(
'--no_dark',
action='store_true',
help="Exihibts the original window (without jam_darkstyle).")
parser.add_argument('--test',
action='store_true',
help="Auto close window after 2s.")
parser.add_argument('--reset',
action='store_true',
help="Reset GUI settings (position, size) then opens.")
parser.add_argument('--screenshots',
action='store_true',
help="Generate screenshots on images folder.")
# Parsing arguments from command line
args = parser.parse_args()
# To avoid problems when testing without screen
if args.test or args.screenshots:
os.environ['QT_QPA_PLATFORM'] = 'offscreen'
# Set QT_API variable before importing QtPy
if args.qt_from in ['pyqt', 'pyqt5', 'pyside', 'pyside2']:
os.environ['QT_API'] = args.qt_from
elif args.qt_from == 'pyqtgraph':
os.environ['QT_API'] = os.environ['PYQTGRAPH_QT_LIB']
elif args.qt_from in ['qt.py', 'qt']:
try:
import Qt
except ImportError:
print('Could not import Qt (Qt.Py)')
else:
os.environ['QT_API'] = Qt.__binding__
# QtPy imports
from qtpy import API_NAME, QT_VERSION, PYQT_VERSION, PYSIDE_VERSION
from qtpy import __version__ as QTPY_VERSION
from qtpy.QtWidgets import (QApplication, QMainWindow, QDockWidget,
QStatusBar, QLabel, QPushButton, QMenu)
from qtpy.QtCore import QTimer, Qt, QSettings
# Set API_VERSION variable
API_VERSION = ''
if PYQT_VERSION:
API_VERSION = PYQT_VERSION
elif PYSIDE_VERSION:
API_VERSION = PYSIDE_VERSION
else:
API_VERSION = 'Not found'
# Import examples UI
from mw_menus_ui import Ui_MainWindow as ui_main
from dw_buttons_ui import Ui_DockWidget as ui_buttons
from dw_displays_ui import Ui_DockWidget as ui_displays
from dw_inputs_fields_ui import Ui_DockWidget as ui_inputs_fields
from dw_inputs_no_fields_ui import Ui_DockWidget as ui_inputs_no_fields
from dw_widgets_ui import Ui_DockWidget as ui_widgets
from dw_views_ui import Ui_DockWidget as ui_views
from dw_containers_tabs_ui import Ui_DockWidget as ui_containers_tabs
from dw_containers_no_tabs_ui import Ui_DockWidget as ui_containers_no_tabs
# create the application
app = QApplication(sys.argv)
app.setOrganizationName('QDarkStyle')
app.setApplicationName('QDarkStyle Example')
style = ''
if not args.no_dark:
style = jam_darkstyle.load_stylesheet()
app.setStyleSheet(style)
# create main window
window = QMainWindow()
window.setObjectName('mainwindow')
ui = ui_main()
ui.setupUi(window)
title = ("QDarkStyle Example - " + "(QDarkStyle=v" +
jam_darkstyle.__version__ + ", QtPy=v" + QTPY_VERSION + ", " +
API_NAME + "=v" + API_VERSION + ", Qt=v" + QT_VERSION +
", Python=v" + platform.python_version() + ")")
_logger.info(title)
window.setWindowTitle(title)
# Create docks for buttons
dw_buttons = QDockWidget()
dw_buttons.setObjectName('buttons')
ui_buttons = ui_buttons()
ui_buttons.setupUi(dw_buttons)
window.addDockWidget(Qt.RightDockWidgetArea, dw_buttons)
# Add actions on popup toolbuttons
menu = QMenu()
for action in ['Action A', 'Action B', 'Action C']:
menu.addAction(action)
ui_buttons.toolButtonDelayedPopup.setMenu(menu)
ui_buttons.toolButtonInstantPopup.setMenu(menu)
ui_buttons.toolButtonMenuButtonPopup.setMenu(menu)
# Create docks for buttons
dw_displays = QDockWidget()
dw_displays.setObjectName('displays')
ui_displays = ui_displays()
ui_displays.setupUi(dw_displays)
window.addDockWidget(Qt.RightDockWidgetArea, dw_displays)
# Create docks for inputs - no fields
dw_inputs_no_fields = QDockWidget()
dw_inputs_no_fields.setObjectName('inputs_no_fields')
ui_inputs_no_fields = ui_inputs_no_fields()
ui_inputs_no_fields.setupUi(dw_inputs_no_fields)
window.addDockWidget(Qt.RightDockWidgetArea, dw_inputs_no_fields)
# Create docks for inputs - fields
dw_inputs_fields = QDockWidget()
dw_inputs_fields.setObjectName('inputs_fields')
ui_inputs_fields = ui_inputs_fields()
ui_inputs_fields.setupUi(dw_inputs_fields)
window.addDockWidget(Qt.RightDockWidgetArea, dw_inputs_fields)
# Create docks for widgets
dw_widgets = QDockWidget()
dw_widgets.setObjectName('widgets')
ui_widgets = ui_widgets()
ui_widgets.setupUi(dw_widgets)
window.addDockWidget(Qt.LeftDockWidgetArea, dw_widgets)
# Create docks for views
dw_views = QDockWidget()
dw_views.setObjectName('views')
ui_views = ui_views()
ui_views.setupUi(dw_views)
window.addDockWidget(Qt.LeftDockWidgetArea, dw_views)
# Create docks for containers - no tabs
dw_containers_no_tabs = QDockWidget()
dw_containers_no_tabs.setObjectName('containers_no_tabs')
ui_containers_no_tabs = ui_containers_no_tabs()
ui_containers_no_tabs.setupUi(dw_containers_no_tabs)
window.addDockWidget(Qt.LeftDockWidgetArea, dw_containers_no_tabs)
# Create docks for containters - tabs
dw_containers_tabs = QDockWidget()
dw_containers_tabs.setObjectName('containers_tabs')
ui_containers_tabs = ui_containers_tabs()
ui_containers_tabs.setupUi(dw_containers_tabs)
window.addDockWidget(Qt.LeftDockWidgetArea, dw_containers_tabs)
# Tabify right docks
window.tabifyDockWidget(dw_buttons, dw_displays)
window.tabifyDockWidget(dw_displays, dw_inputs_fields)
window.tabifyDockWidget(dw_inputs_fields, dw_inputs_no_fields)
# Tabify left docks
window.tabifyDockWidget(dw_containers_no_tabs, dw_containers_tabs)
window.tabifyDockWidget(dw_containers_tabs, dw_widgets)
window.tabifyDockWidget(dw_widgets, dw_views)
# Issues #9120, #9121 on Spyder
qstatusbar = QStatusBar()
qstatusbar.addWidget(
QLabel('Issue Spyder #9120, #9121 - background not matching.'))
qstatusbar.addWidget(QPushButton('OK'))
# Add info also in status bar for screenshots get it
qstatusbar.addWidget(QLabel('INFO: ' + title))
window.setStatusBar(qstatusbar)
# Todo: add report info and other info in HELP graphical
# Auto quit after 2s when in test mode
if args.test:
QTimer.singleShot(2000, app.exit)
# Save screenshots for different displays and quit
if args.screenshots:
window.showFullScreen()
create_screenshots(app, window, args.no_dark)
# Do not read settings when taking screenshots - like reset
else:
_read_settings(window, args.reset, QSettings)
window.showMaximized()
app.exec_()
_write_settings(window, QSettings)
return window
class Window:
"""Application window that contains the menu bar and viewer.
Parameters
----------
qt_viewer : QtViewer
Contained viewer widget.
Attributes
----------
file_menu : qtpy.QtWidgets.QMenu
File menu.
help_menu : qtpy.QtWidgets.QMenu
Help menu.
main_menu : qtpy.QtWidgets.QMainWindow.menuBar
Main menubar.
qt_viewer : QtViewer
Contained viewer widget.
view_menu : qtpy.QtWidgets.QMenu
View menu.
window_menu : qtpy.QtWidgets.QMenu
Window menu.
"""
raw_stylesheet = combine_stylesheets()
def __init__(self, qt_viewer, *, show=True):
self.qt_viewer = qt_viewer
self._qt_window = QMainWindow()
self._qt_window.setAttribute(Qt.WA_DeleteOnClose)
self._qt_window.setUnifiedTitleAndToolBarOnMac(True)
self._qt_center = QWidget(self._qt_window)
self._qt_window.setCentralWidget(self._qt_center)
self._qt_window.setWindowTitle(self.qt_viewer.viewer.title)
self._qt_center.setLayout(QHBoxLayout())
self._status_bar = QStatusBar()
self._qt_window.setStatusBar(self._status_bar)
self._add_menubar()
self._add_file_menu()
self._add_view_menu()
self._add_window_menu()
self._add_help_menu()
self._status_bar.showMessage('Ready')
self._help = QLabel('')
self._status_bar.addPermanentWidget(self._help)
self._qt_center.layout().addWidget(self.qt_viewer)
self._qt_center.layout().setContentsMargins(4, 0, 4, 0)
self._update_palette(qt_viewer.viewer.palette)
if self.qt_viewer.console.shell is not None:
self._add_viewer_dock_widget(self.qt_viewer.dockConsole)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerControls)
self._add_viewer_dock_widget(self.qt_viewer.dockLayerList)
self.qt_viewer.viewer.events.status.connect(self._status_changed)
self.qt_viewer.viewer.events.help.connect(self._help_changed)
self.qt_viewer.viewer.events.title.connect(self._title_changed)
self.qt_viewer.viewer.events.palette.connect(
lambda event: self._update_palette(event.palette))
if show:
self.show()
def _add_menubar(self):
"""Add menubar to napari app."""
self.main_menu = self._qt_window.menuBar()
# Menubar shortcuts are only active when the menubar is visible.
# Therefore, we set a global shortcut not associated with the menubar
# to toggle visibility, *but*, in order to not shadow the menubar
# shortcut, we disable it, and only enable it when the menubar is
# hidden. See this stackoverflow link for details:
# https://stackoverflow.com/questions/50537642/how-to-keep-the-shortcuts-of-a-hidden-widget-in-pyqt5
self._main_menu_shortcut = QShortcut(QKeySequence('Ctrl+M'),
self._qt_window)
self._main_menu_shortcut.activated.connect(
self._toggle_menubar_visible)
self._main_menu_shortcut.setEnabled(False)
def _toggle_menubar_visible(self):
"""Toggle visibility of app menubar.
This function also disables or enables a global keyboard shortcut to
show the menubar, since menubar shortcuts are only available while the
menubar is visible.
"""
if self.main_menu.isVisible():
self.main_menu.setVisible(False)
self._main_menu_shortcut.setEnabled(True)
else:
self.main_menu.setVisible(True)
self._main_menu_shortcut.setEnabled(False)
def _add_file_menu(self):
"""Add 'File' menu to app menubar."""
open_images = QAction('Open image(s)...', self._qt_window)
open_images.setShortcut('Ctrl+O')
open_images.setStatusTip('Open image file(s)')
open_images.triggered.connect(self.qt_viewer._open_images)
open_folder = QAction('Open Folder...', self._qt_window)
open_folder.setShortcut('Ctrl+Shift+O')
open_folder.setStatusTip(
'Open a folder of image file(s) or a zarr file')
open_folder.triggered.connect(self.qt_viewer._open_folder)
screenshot = QAction('Screenshot', self._qt_window)
screenshot.setShortcut('Ctrl+Alt+S')
screenshot.setStatusTip(
'Save screenshot of current display, default .png')
screenshot.triggered.connect(self.qt_viewer._save_screenshot)
self.file_menu = self.main_menu.addMenu('&File')
self.file_menu.addAction(open_images)
self.file_menu.addAction(open_folder)
self.file_menu.addAction(screenshot)
def _add_view_menu(self):
"""Add 'View' menu to app menubar."""
toggle_visible = QAction('Toggle menubar visibility', self._qt_window)
toggle_visible.setShortcut('Ctrl+M')
toggle_visible.setStatusTip('Hide Menubar')
toggle_visible.triggered.connect(self._toggle_menubar_visible)
toggle_theme = QAction('Toggle theme', self._qt_window)
toggle_theme.setShortcut('Ctrl+Shift+T')
toggle_theme.setStatusTip('Toggle theme')
toggle_theme.triggered.connect(self.qt_viewer.viewer._toggle_theme)
self.view_menu = self.main_menu.addMenu('&View')
self.view_menu.addAction(toggle_visible)
self.view_menu.addAction(toggle_theme)
def _add_window_menu(self):
"""Add 'Window' menu to app menubar."""
exit_action = QAction("Close window", self._qt_window)
exit_action.setShortcut("Ctrl+W")
exit_action.setStatusTip('Close napari window')
exit_action.triggered.connect(self._qt_window.close)
self.window_menu = self.main_menu.addMenu('&Window')
self.window_menu.addAction(exit_action)
def _add_help_menu(self):
"""Add 'Help' menu to app menubar."""
self.help_menu = self.main_menu.addMenu('&Help')
about_action = QAction("napari info", self._qt_window)
about_action.setShortcut("Ctrl+/")
about_action.setStatusTip('About napari')
about_action.triggered.connect(
lambda e: QtAbout.showAbout(self.qt_viewer))
self.help_menu.addAction(about_action)
about_keybindings = QAction("keybindings", self._qt_window)
about_keybindings.setShortcut("Ctrl+Alt+/")
about_keybindings.setShortcutContext(Qt.ApplicationShortcut)
about_keybindings.setStatusTip('keybindings')
about_keybindings.triggered.connect(
self.qt_viewer.show_keybindings_dialog)
self.help_menu.addAction(about_keybindings)
def add_dock_widget(
self,
widget: QWidget,
*,
name: str = '',
area: str = 'bottom',
allowed_areas=None,
shortcut=None,
):
"""Convenience method to add a QDockWidget to the main window
Parameters
----------
widget : QWidget
`widget` will be added as QDockWidget's main widget.
name : str, optional
Name of dock widget to appear in window menu.
area : str
Side of the main window to which the new dock widget will be added.
Must be in {'left', 'right', 'top', 'bottom'}
allowed_areas : list[str], optional
Areas, relative to main window, that the widget is allowed dock.
Each item in list must be in {'left', 'right', 'top', 'bottom'}
By default, all areas are allowed.
shortcut : str, optional
Keyboard shortcut to appear in dropdown menu.
Returns
-------
dock_widget : QtViewerDockWidget
`dock_widget` that can pass viewer events.
"""
dock_widget = QtViewerDockWidget(
self.qt_viewer,
widget,
name=name,
area=area,
allowed_areas=allowed_areas,
shortcut=shortcut,
)
self._add_viewer_dock_widget(dock_widget)
return dock_widget
def _add_viewer_dock_widget(self, dock_widget: QtViewerDockWidget):
"""Add a QtViewerDockWidget to the main window
Parameters
----------
dock_widget : QtViewerDockWidget
`dock_widget` will be added to the main window.
"""
dock_widget.setParent(self._qt_window)
self._qt_window.addDockWidget(dock_widget.qt_area, dock_widget)
action = dock_widget.toggleViewAction()
action.setStatusTip(dock_widget.name)
action.setText(dock_widget.name)
if dock_widget.shortcut is not None:
action.setShortcut(dock_widget.shortcut)
self.window_menu.addAction(action)
def remove_dock_widget(self, widget):
"""Removes specified dock widget.
Parameters
----------
widget : QWidget | str
If widget == 'all', all docked widgets will be removed.
"""
if widget == 'all':
for dw in self._qt_window.findChildren(QDockWidget):
self._qt_window.removeDockWidget(dw)
else:
self._qt_window.removeDockWidget(widget)
def resize(self, width, height):
"""Resize the window.
Parameters
----------
width : int
Width in logical pixels.
height : int
Height in logical pixels.
"""
self._qt_window.resize(width, height)
def show(self):
"""Resize, show, and bring forward the window."""
self._qt_window.resize(self._qt_window.layout().sizeHint())
self._qt_window.show()
# We want to call Window._qt_window.raise_() in every case *except*
# when instantiating a viewer within a gui_qt() context for the
# _first_ time within the Qt app's lifecycle.
#
# `app_name` will be "napari" iff the application was instantiated in
# gui_qt(). isActiveWindow() will be True if it is the second time a
# _qt_window has been created. See #732
app_name = QApplication.instance().applicationName()
if app_name != 'napari' or self._qt_window.isActiveWindow():
self._qt_window.raise_() # for macOS
self._qt_window.activateWindow() # for Windows
def _update_palette(self, palette):
"""Update widget color palette.
Parameters
----------
palette : qtpy.QtGui.QPalette
Color palette for each widget state (Active, Disabled, Inactive).
"""
# set window styles which don't use the primary stylesheet
# FIXME: this is a problem with the stylesheet not using properties
self._status_bar.setStyleSheet(
template(
'QStatusBar { background: {{ background }}; '
'color: {{ text }}; }',
**palette,
))
self._qt_center.setStyleSheet(
template('QWidget { background: {{ background }}; }', **palette))
self._qt_window.setStyleSheet(template(self.raw_stylesheet, **palette))
def _status_changed(self, event):
"""Update status bar.
Parameters
----------
event : qtpy.QtCore.QEvent
Event from the Qt context.
"""
self._status_bar.showMessage(event.text)
def _title_changed(self, event):
"""Update window title.
Parameters
----------
event : qtpy.QtCore.QEvent
Event from the Qt context.
"""
self._qt_window.setWindowTitle(event.text)
def _help_changed(self, event):
"""Update help message on status bar.
Parameters
----------
event : qtpy.QtCore.QEvent
Event from the Qt context.
"""
self._help.setText(event.text)
def screenshot(self, path=None):
"""Take currently displayed viewer and convert to an image array.
Parameters
----------
path : str
Filename for saving screenshot image.
Returns
-------
image : array
Numpy array of type ubyte and shape (h, w, 4). Index [0, 0] is the
upper-left corner of the rendered region.
"""
img = self._qt_window.grab().toImage()
if path is not None:
imsave(path, QImg2array(img)) # scikit-image imsave method
return QImg2array(img)
def close(self):
"""Close the viewer window and cleanup sub-widgets."""
# on some versions of Darwin, exiting while fullscreen seems to tickle
# some bug deep in NSWindow. This forces the fullscreen keybinding
# test to complete its draw cycle, then pop back out of fullscreen.
if self._qt_window.isFullScreen():
self._qt_window.showNormal()
for i in range(8):
time.sleep(0.1)
QApplication.processEvents()
self.qt_viewer.close()
self._qt_window.close()
del self._qt_window
class MainWindow(QMainWindow):
"""OpenBurn's main window"""
title = "OpenBurn"
def __init__(self):
super(MainWindow, self).__init__()
self.setWindowTitle(self.title)
self.setGeometry(100, 100, 800, 600)
self.setWindowIcon(QIcon(RESOURCE_PATH + "icons/nakka-finocyl.gif"))
self.create_default_widgets()
self.setup_ui()
def create_default_widgets(self):
"""Creates static widgets such as menubar and statusbar"""
def create_menubar():
"""Create menu bar and populate it with sub menu actions"""
def file_menu():
"""Create a file submenu"""
self.file_sub_menu = self.menubar.addMenu('File')
self.open_action = QAction('Open File', self)
self.open_action.setStatusTip('Open a new design')
self.open_action.setShortcut('CTRL+O')
# self.open_action.triggered.connect(self.open_file)
self.exit_action = QAction('Exit', self)
self.exit_action.setStatusTip('Exit the application.')
self.exit_action.setShortcut('CTRL+Q')
self.exit_action.triggered.connect(QApplication.quit)
self.file_sub_menu.addAction(self.open_action)
self.file_sub_menu.addAction(self.exit_action)
def edit_menu():
self.edit_dub_menu = self.menubar.addMenu('Edit')
def tools_menu():
self.edit_dub_menu = self.menubar.addMenu('Tools')
def help_menu():
"""Create help submenu"""
self.help_sub_menu = self.menubar.addMenu('Help')
self.about_action = QAction('About', self)
self.about_action.setStatusTip('About the application.')
self.about_action.setShortcut('CTRL+H')
self.about_action.triggered.connect(self.about_dialog.exec_)
self.help_sub_menu.addAction(self.about_action)
self.menubar = QMenuBar(self)
file_menu()
edit_menu()
tools_menu()
help_menu()
def create_statusbar():
self.statusbar = QStatusBar(self)
self.statusbar.showMessage("Ready", 0)
self.about_dialog = AboutDialog(self)
create_menubar()
self.setMenuBar(self.menubar)
create_statusbar()
self.setStatusBar(self.statusbar)
def setup_ui(self):
"""setup the tab widget UI"""
self.tab_widget = QTabWidget()
self.tab_widget.addTab(DesignTab(), "Design")
self.tab_widget.addTab(QWidget(), "Simulation")
self.tab_widget.addTab(QWidget(), "Propellants")
self.layout = QVBoxLayout()
self.layout.addWidget(self.tab_widget)
self.frame = QFrame()
self.frame.setLayout(self.layout)
self.setCentralWidget(self.frame)
