def installpkgs(args):
"""Installs the necessary packages on the current machine.
"""
if not THIS_DISTRIBUTION:
logger.critical("Not running on Linux")
sys.exit(1)
pack = args.pack[0]
missing = args.missing
# Loads config
runs, packages, other_files = load_config(pack)
try:
installer = select_installer(pack, runs)
except CantFindInstaller as e:
logger.error("Couldn't select a package installer: %s", e)
if args.summary:
# Print out a list of packages with their status
if missing:
print("Packages not present in pack:")
packages = [pkg for pkg in packages if not pkg.packfiles]
else:
print("All packages:")
pkgs = installer.get_packages_info(packages)
for pkg in packages:
print(" %s (required version: %s, status: %s)" %
(pkg.name, pkg.version, pkgs[pkg.name][1]))
else:
if missing:
# With --missing, ignore packages whose files were packed
packages = [pkg for pkg in packages if not pkg.packfiles]
# Installs packages
record_usage(installpkgs_installing=len(packages))
r, pkgs = installer.install(packages, assume_yes=args.assume_yes)
for pkg in packages:
req = pkg.version
real = pkgs[pkg.name][1]
if real == PKG_NOT_INSTALLED:
logger.warning("package %s was not installed", pkg.name)
else:
logger.warning(
"version %s of %s was installed, instead of "
"%s", real, pkg.name, req)
if r != 0:
logger.critical("Installer exited with %d", r)
sys.exit(r)
def installpkgs(args):
"""Installs the necessary packages on the current machine.
"""
if not THIS_DISTRIBUTION:
logging.critical("Not running on Linux")
sys.exit(1)
pack = args.pack[0]
missing = args.missing
# Loads config
runs, packages, other_files = load_config(pack)
try:
installer = select_installer(pack, runs)
except CantFindInstaller as e:
logging.error("Couldn't select a package installer: %s", e)
if args.summary:
# Print out a list of packages with their status
if missing:
print("Packages not present in pack:")
packages = [pkg for pkg in packages if not pkg.packfiles]
else:
print("All packages:")
pkgs = installer.get_packages_info(packages)
for pkg in packages:
print(" %s (required version: %s, status: %s)" % (
pkg.name, pkg.version, pkgs[pkg.name][1]))
else:
if missing:
# With --missing, ignore packages whose files were packed
packages = [pkg for pkg in packages if not pkg.packfiles]
# Installs packages
record_usage(installpkgs_installing=len(packages))
r, pkgs = installer.install(packages, assume_yes=args.assume_yes)
for pkg in packages:
req = pkg.version
real = pkgs[pkg.name][1]
if real == PKG_NOT_INSTALLED:
logging.warning("package %s was not installed", pkg.name)
else:
logging.warning("version %s of %s was installed, instead of "
"%s", real, pkg.name, req)
if r != 0:
logging.critical("Installer exited with %d", r)
sys.exit(r)
def docker_setup_create(args):
"""Sets up the experiment to be run in a Docker-built container.
"""
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logging.critical("Target directory exists")
sys.exit(1)
signals.pre_setup(target=target, pack=pack)
target.mkdir()
try:
# Unpacks configuration file
rpz_pack = RPZPack(pack)
rpz_pack.extract_config(target / 'config.yml')
# Loads config
runs, packages, other_files = config = load_config(
target / 'config.yml', True)
if args.base_image:
record_usage(docker_explicit_base=True)
base_image = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, base_image = select_image(runs)
logging.info("Using base image %s", base_image)
logging.debug("Distribution: %s", target_distribution or "unknown")
rpz_pack.copy_data_tar(target / 'data.tgz')
arch = runs[0]['architecture']
# Writes Dockerfile
logging.info("Writing %s...", target / 'Dockerfile')
with (target / 'Dockerfile').open('w', encoding='utf-8',
newline='\n') as fp:
fp.write('FROM %s\n\n' % base_image)
# Installs busybox
download_file(busybox_url(arch), target / 'busybox',
'busybox-%s' % arch)
fp.write('COPY busybox /busybox\n')
# Installs rpzsudo
download_file(sudo_url(arch), target / 'rpzsudo',
'rpzsudo-%s' % arch)
fp.write('COPY rpzsudo /rpzsudo\n\n')
fp.write('COPY data.tgz /reprozip_data.tgz\n\n')
fp.write('COPY rpz-files.list /rpz-files.list\n')
fp.write('RUN \\\n' ' chmod +x /busybox /rpzsudo && \\\n')
if args.install_pkgs:
# Install every package through package manager
missing_packages = []
else:
# Only install packages that were not packed
missing_packages = [pkg for pkg in packages if pkg.packfiles]
packages = [pkg for pkg in packages if not pkg.packfiles]
if packages:
record_usage(docker_install_pkgs=True)
try:
installer = select_installer(pack, runs,
target_distribution)
except CantFindInstaller as e:
logging.error(
"Need to install %d packages but couldn't "
"select a package installer: %s", len(packages), e)
sys.exit(1)
# Updates package sources
update_script = installer.update_script()
if update_script:
fp.write(' %s && \\\n' % update_script)
# Installs necessary packages
fp.write(' %s && \\\n' % installer.install_script(packages))
logging.info(
"Dockerfile will install the %d software "
"packages that were not packed", len(packages))
else:
record_usage(docker_install_pkgs=False)
# Untar
paths = set()
pathlist = []
# Add intermediate directories, and check for existence in the tar
missing_files = chain.from_iterable(pkg.files
for pkg in missing_packages)
data_files = rpz_pack.data_filenames()
listoffiles = list(chain(other_files, missing_files))
for f in listoffiles:
path = PosixPath('/')
for c in rpz_pack.remove_data_prefix(f.path).components:
path = path / c
if path in paths:
continue
paths.add(path)
if path in data_files:
pathlist.append(path)
else:
logging.info("Missing file %s", path)
rpz_pack.close()
# FIXME : for some reason we need reversed() here, I'm not sure why
# Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
with (target / 'rpz-files.list').open('wb') as lfp:
for p in reversed(pathlist):
lfp.write(join_root(rpz_pack.data_prefix, p).path)
lfp.write(b'\0')
fp.write(' cd / && '
'(tar zpxf /reprozip_data.tgz -U --recursive-unlink '
'--numeric-owner --strip=1 --null -T /rpz-files.list || '
'/busybox echo "TAR reports errors, this might or might '
'not prevent the execution to run")\n')
# Meta-data for reprounzip
write_dict(target, metadata_initial_iofiles(config))
signals.post_setup(target=target, pack=pack)
except Exception:
target.rmtree(ignore_errors=True)
raise
def vagrant_setup_create(args):
"""Sets up the experiment to be run in a Vagrant-built virtual machine.
This can either build a chroot or not.
If building a chroot, we do just like without Vagrant: we copy all the
files and only get what's missing from the host. But we do install
automatically the packages whose files are required.
If not building a chroot, we install all the packages, and only unpack
files that don't come from packages.
In short: files from packages with packfiles=True will only be used if
building a chroot.
"""
if not args.pack:
logging.critical("setup/create needs the pack filename")
sys.exit(1)
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logging.critical("Target directory exists")
sys.exit(1)
use_chroot = args.use_chroot
mount_bind = args.bind_magic_dirs
record_usage(use_chroot=use_chroot,
mount_bind=mount_bind)
signals.pre_setup(target=target, pack=pack)
# Unpacks configuration file
rpz_pack = RPZPack(pack)
rpz_pack.extract_config(target / 'config.yml')
# Loads config
runs, packages, other_files = config = load_config(target / 'config.yml',
True)
if not args.memory:
memory = None
else:
try:
memory = int(args.memory[-1])
except ValueError:
logging.critical("Invalid value for memory size: %r", args.memory)
sys.exit(1)
if args.base_image and args.base_image[0]:
record_usage(vagrant_explicit_image=True)
box = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, box = select_box(runs)
logging.info("Using box %s", box)
logging.debug("Distribution: %s", target_distribution or "unknown")
# If using chroot, we might still need to install packages to get missing
# (not packed) files
if use_chroot:
packages = [pkg for pkg in packages if not pkg.packfiles]
if packages:
record_usage(vagrant_install_pkgs=True)
logging.info("Some packages were not packed, so we'll install and "
"copy their files\n"
"Packages that are missing:\n%s",
' '.join(pkg.name for pkg in packages))
if packages:
try:
installer = select_installer(pack, runs, target_distribution)
except CantFindInstaller as e:
logging.error("Need to install %d packages but couldn't select a "
"package installer: %s",
len(packages), e)
target.mkdir(parents=True)
try:
# Writes setup script
logging.info("Writing setup script %s...", target / 'setup.sh')
with (target / 'setup.sh').open('w', encoding='utf-8',
newline='\n') as fp:
fp.write('#!/bin/sh\n\nset -e\n\n')
if packages:
# Updates package sources
fp.write(installer.update_script())
fp.write('\n')
# Installs necessary packages
fp.write(installer.install_script(packages))
fp.write('\n')
# TODO : Compare package versions (painful because of sh)
# Untar
if use_chroot:
fp.write('\n'
'mkdir /experimentroot; cd /experimentroot\n')
fp.write('tar zpxf /vagrant/data.tgz --numeric-owner '
'--strip=1 %s\n' % rpz_pack.data_prefix)
if mount_bind:
fp.write('\n'
'mkdir -p /experimentroot/dev\n'
'mkdir -p /experimentroot/proc\n')
for pkg in packages:
fp.write('\n# Copies files from package %s\n' % pkg.name)
for f in pkg.files:
f = f.path
dest = join_root(PosixPath('/experimentroot'), f)
fp.write('mkdir -p %s\n' %
shell_escape(unicode_(f.parent)))
fp.write('cp -L %s %s\n' % (
shell_escape(unicode_(f)),
shell_escape(unicode_(dest))))
else:
fp.write('\ncd /\n')
paths = set()
pathlist = []
# Adds intermediate directories, and checks for existence in
# the tar
for f in other_files:
path = PosixPath('/')
for c in rpz_pack.remove_data_prefix(f.path).components:
path = path / c
if path in paths:
continue
paths.add(path)
try:
rpz_pack.get_data(path)
except KeyError:
logging.info("Missing file %s", path)
else:
pathlist.append(path)
# FIXME : for some reason we need reversed() here, I'm not sure
# why. Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
# TAR bug: there is no way to make --keep-old-files not report
# an error if an existing file is encountered. --skip-old-files
# was introduced too recently. Instead, we just ignore the exit
# status
with (target / 'rpz-files.list').open('wb') as lfp:
for p in reversed(pathlist):
lfp.write(join_root(rpz_pack.data_prefix, p).path)
lfp.write(b'\0')
fp.write('tar zpxf /vagrant/data.tgz --keep-old-files '
'--numeric-owner --strip=1 '
'--null -T /vagrant/rpz-files.list || /bin/true\n')
# Copies busybox
if use_chroot:
arch = runs[0]['architecture']
download_file(busybox_url(arch),
target / 'busybox',
'busybox-%s' % arch)
fp.write(r'''
cp /vagrant/busybox /experimentroot/busybox
chmod +x /experimentroot/busybox
mkdir -p /experimentroot/bin
[ -e /experimentroot/bin/sh ] || \
ln -s /busybox /experimentroot/bin/sh
''')
# Copies pack
logging.info("Copying pack file...")
rpz_pack.copy_data_tar(target / 'data.tgz')
rpz_pack.close()
# Writes Vagrant file
logging.info("Writing %s...", target / 'Vagrantfile')
with (target / 'Vagrantfile').open('w', encoding='utf-8',
newline='\n') as fp:
# Vagrant header and version
fp.write(
'# -*- mode: ruby -*-\n'
'# vi: set ft=ruby\n\n'
'VAGRANTFILE_API_VERSION = "2"\n\n'
'Vagrant.configure(VAGRANTFILE_API_VERSION) do |config|\n')
# Selects which box to install
fp.write(' config.vm.box = "%s"\n' % box)
# Run the setup script on the virtual machine
fp.write(' config.vm.provision "shell", path: "setup.sh"\n')
# Memory size
if memory is not None:
fp.write(' config.vm.provider "virtualbox" do |v|\n'
' v.memory = %d\n'
' end\n' % memory)
fp.write('end\n')
# Meta-data for reprounzip
write_dict(target,
metadata_initial_iofiles(config,
{'use_chroot': use_chroot}))
signals.post_setup(target=target, pack=pack)
except Exception:
target.rmtree(ignore_errors=True)
raise
def docker_setup_create(args):
"""Sets up the experiment to be run in a Docker-built container.
"""
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logging.critical("Target directory exists")
sys.exit(1)
signals.pre_setup(target=target, pack=pack)
target.mkdir()
try:
# Unpacks configuration file
rpz_pack = RPZPack(pack)
rpz_pack.extract_config(target / 'config.yml')
# Loads config
runs, packages, other_files = config = load_config(
target / 'config.yml', True)
if args.base_image:
record_usage(docker_explicit_base=True)
base_image = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, base_image = select_image(runs)
logging.info("Using base image %s", base_image)
logging.debug("Distribution: %s", target_distribution or "unknown")
rpz_pack.copy_data_tar(target / 'data.tgz')
arch = runs[0]['architecture']
# Writes Dockerfile
logging.info("Writing %s...", target / 'Dockerfile')
with (target / 'Dockerfile').open('w', encoding='utf-8',
newline='\n') as fp:
fp.write('FROM %s\n\n' % base_image)
# Installs busybox
download_file(busybox_url(arch),
target / 'busybox',
'busybox-%s' % arch)
fp.write('COPY busybox /busybox\n')
# Installs rpzsudo
download_file(sudo_url(arch),
target / 'rpzsudo',
'rpzsudo-%s' % arch)
fp.write('COPY rpzsudo /rpzsudo\n\n')
fp.write('COPY data.tgz /reprozip_data.tgz\n\n')
fp.write('COPY rpz-files.list /rpz-files.list\n')
fp.write('RUN \\\n'
' chmod +x /busybox /rpzsudo && \\\n')
if args.install_pkgs:
# Install every package through package manager
missing_packages = []
else:
# Only install packages that were not packed
missing_packages = [pkg for pkg in packages if pkg.packfiles]
packages = [pkg for pkg in packages if not pkg.packfiles]
if packages:
record_usage(docker_install_pkgs=True)
try:
installer = select_installer(pack, runs,
target_distribution)
except CantFindInstaller as e:
logging.error("Need to install %d packages but couldn't "
"select a package installer: %s",
len(packages), e)
sys.exit(1)
# Updates package sources
update_script = installer.update_script()
if update_script:
fp.write(' %s && \\\n' % update_script)
# Installs necessary packages
fp.write(' %s && \\\n' % installer.install_script(packages))
logging.info("Dockerfile will install the %d software "
"packages that were not packed", len(packages))
else:
record_usage(docker_install_pkgs=False)
# Untar
paths = set()
pathlist = []
# Add intermediate directories, and check for existence in the tar
logging.info("Generating file list...")
missing_files = chain.from_iterable(pkg.files
for pkg in missing_packages)
data_files = rpz_pack.data_filenames()
listoffiles = list(chain(other_files, missing_files))
for f in listoffiles:
if f.path.name == 'resolv.conf' and (
f.path.lies_under('/etc') or
f.path.lies_under('/run') or
f.path.lies_under('/var')):
continue
path = PosixPath('/')
for c in rpz_pack.remove_data_prefix(f.path).components:
path = path / c
if path in paths:
continue
paths.add(path)
if path in data_files:
pathlist.append(path)
else:
logging.info("Missing file %s", path)
rpz_pack.close()
# FIXME : for some reason we need reversed() here, I'm not sure why
# Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
with (target / 'rpz-files.list').open('wb') as lfp:
for p in reversed(pathlist):
lfp.write(join_root(rpz_pack.data_prefix, p).path)
lfp.write(b'\0')
fp.write(' cd / && '
'(tar zpxf /reprozip_data.tgz -U --recursive-unlink '
'--numeric-owner --strip=1 --null -T /rpz-files.list || '
'/busybox echo "TAR reports errors, this might or might '
'not prevent the execution to run")\n')
# Setup entry point
fp.write('COPY rpz_entrypoint.sh /rpz_entrypoint.sh\n'
'ENTRYPOINT ["/busybox", "sh", "/rpz_entrypoint.sh"]\n')
# Write entry point script
logging.info("Writing %s...", target / 'rpz_entrypoint.sh')
with (target / 'rpz_entrypoint.sh').open('w', encoding='utf-8',
newline='\n') as fp:
# The entrypoint gets some arguments from the run command
# By default, it just does all the runs
# "run N" executes the run with that number
# "cmd STR" sets a replacement command-line for the next run
# "do STR" executes a command as-is
fp.write(
'#!/bin/sh\n'
'\n'
'COMMAND=\n'
'ENVVARS=\n'
'\n'
'if [ $# = 0 ]; then\n'
' exec /busybox sh /rpz_entrypoint.sh')
for nb in irange(len(runs)):
fp.write(' run %d' % nb)
fp.write(
'\n'
'fi\n'
'\n'
'while [ $# != 0 ]; do\n'
' case "$1" in\n'
' help)\n'
' echo "Image built from reprounzip-docker" >&2\n'
' echo "Usage: docker run <image> [cmd word [word '
'...]] [run <R>]" >&2\n'
' echo " \\`cmd ...\\` changes the command for '
'the next \\`run\\` option" >&2\n'
' echo " \\`run <name|number>\\` runs the '
'specified run" >&2\n'
' echo "By default, all the runs are executed." '
'>&2\n'
' echo "The runs in this image are:" >&2\n')
for run in runs:
fp.write(
' echo " {name}: {cmdline}" >&2\n'.format(
name=run['id'],
cmdline=' '.join(shell_escape(a)
for a in run['argv'])))
fp.write(
' exit 0\n'
' ;;\n'
' do)\n'
' shift\n'
' $1\n'
' ;;\n'
' env)\n'
' shift\n'
' ENVVARS="$1"\n'
' ;;\n'
' cmd)\n'
' shift\n'
' COMMAND="$1"\n'
' ;;\n'
' run)\n'
' shift\n'
' case "$1" in\n')
for i, run in enumerate(runs):
cmdline = ' '.join([run['binary']] + run['argv'][1:])
fp.write(
' {name})\n'
' RUNCOMMAND={cmd}\n'
' RUNWD={wd}\n'
' RUNENV={env}\n'
' RUNUID={uid}\n'
' RUNGID={gid}\n'
' ;;\n'.format(
name='%s|%d' % (run['id'], i),
cmd=shell_escape(cmdline),
wd=shell_escape(run['workingdir']),
env=shell_escape(' '.join(
'%s=%s' % (shell_escape(k), shell_escape(v))
for k, v in iteritems(run['environ']))),
uid=run.get('uid', 1000),
gid=run.get('gid', 1000)))
fp.write(
' *)\n'
' echo "RPZ: Unknown run $1" >&2\n'
' exit 1\n'
' ;;\n'
' esac\n'
' if [ -n "$COMMAND" ]; then\n'
' RUNCOMMAND="$COMMAND"\n'
' COMMAND=\n'
' fi\n'
' export RUNWD; export RUNENV; export ENVVARS; '
'export RUNCOMMAND\n'
' /rpzsudo "#$RUNUID" "#$RUNGID" /busybox sh -c '
'"cd \\"\\$RUNWD\\" && /busybox env -i $RUNENV $ENVVARS '
'$RUNCOMMAND"\n'
' ENVVARS=\n'
' ;;\n'
' *)\n'
' echo "RPZ: Unknown option $1" >&2\n'
' exit 1\n'
' ;;\n'
' esac\n'
' shift\n'
'done\n')
# Meta-data for reprounzip
write_dict(target, metadata_initial_iofiles(config))
signals.post_setup(target=target, pack=pack)
except Exception:
target.rmtree(ignore_errors=True)
raise
def docker_setup_create(args):
"""Sets up the experiment to be run in a Docker-built container.
"""
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logging.critical("Target directory exists")
sys.exit(1)
signals.pre_setup(target=target, pack=pack)
# Unpacks configuration file
tar = tarfile.open(str(pack), 'r:*')
member = tar.getmember('METADATA/config.yml')
member.name = 'config.yml'
tar.extract(member, str(target))
tar.close()
# Loads config
runs, packages, other_files = load_config(target / 'config.yml', True)
if args.base_image:
record_usage(docker_explicit_base=True)
base_image = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, base_image = select_image(runs)
logging.info("Using base image %s", base_image)
logging.debug("Distribution: %s", target_distribution or "unknown")
target.mkdir(parents=True)
pack.copyfile(target / 'experiment.rpz')
# Writes Dockerfile
logging.info("Writing %s...", target / 'Dockerfile')
with (target / 'Dockerfile').open('w',
encoding='utf-8', newline='\n') as fp:
fp.write('FROM %s\n\n' % base_image)
# Installs busybox
download_file(busybox_url(runs[0]['architecture']),
target / 'busybox')
fp.write('COPY busybox /bin/busybox\n')
fp.write('COPY experiment.rpz /reprozip_experiment.rpz\n\n')
fp.write('RUN \\\n'
' chmod +x /bin/busybox && \\\n')
if args.install_pkgs:
# Install every package through package manager
missing_packages = []
else:
# Only install packages that were not packed
missing_packages = [pkg for pkg in packages if pkg.packfiles]
packages = [pkg for pkg in packages if not pkg.packfiles]
# FIXME : Right now, we need 'sudo' to be available (and it's not
# necessarily in the base image)
if packages:
record_usage(docker_install_pkgs=True)
else:
record_usage(docker_install_pkgs="sudo")
packages += [Package('sudo', None, packfiles=False)]
if packages:
try:
installer = select_installer(pack, runs, target_distribution)
except CantFindInstaller as e:
logging.error("Need to install %d packages but couldn't "
"select a package installer: %s",
len(packages), e)
sys.exit(1)
# Updates package sources
fp.write(' %s && \\\n' % installer.update_script())
# Installs necessary packages
fp.write(' %s && \\\n' % installer.install_script(packages))
logging.info("Dockerfile will install the %d software packages that "
"were not packed", len(packages))
# Untar
paths = set()
pathlist = []
dataroot = PosixPath('DATA')
# Adds intermediate directories, and checks for existence in the tar
tar = tarfile.open(str(pack), 'r:*')
missing_files = chain.from_iterable(pkg.files
for pkg in missing_packages)
for f in chain(other_files, missing_files):
path = PosixPath('/')
for c in f.path.components[1:]:
path = path / c
if path in paths:
continue
paths.add(path)
datapath = join_root(dataroot, path)
try:
tar.getmember(str(datapath))
except KeyError:
logging.info("Missing file %s", datapath)
else:
pathlist.append(unicode_(datapath))
tar.close()
# FIXME : for some reason we need reversed() here, I'm not sure why.
# Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
fp.write(' cd / && tar zpxf /reprozip_experiment.rpz '
'--numeric-owner --strip=1 %s\n' %
' '.join(shell_escape(p) for p in reversed(pathlist)))
# Meta-data for reprounzip
write_dict(target / '.reprounzip', {})
signals.post_setup(target=target)
def docker_setup_create(args):
"""Sets up the experiment to be run in a Docker-built container.
"""
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logging.critical("Target directory exists")
sys.exit(1)
signals.pre_setup(target=target, pack=pack)
# Unpacks configuration file
rpz_pack = RPZPack(pack)
rpz_pack.extract_config(target / 'config.yml')
# Loads config
runs, packages, other_files = load_config(target / 'config.yml', True)
if args.base_image:
record_usage(docker_explicit_base=True)
base_image = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, base_image = select_image(runs)
logging.info("Using base image %s", base_image)
logging.debug("Distribution: %s", target_distribution or "unknown")
target.mkdir(parents=True)
rpz_pack.copy_data_tar(target / 'data.tgz')
arch = runs[0]['architecture']
# Writes Dockerfile
logging.info("Writing %s...", target / 'Dockerfile')
with (target / 'Dockerfile').open('w',
encoding='utf-8', newline='\n') as fp:
fp.write('FROM %s\n\n' % base_image)
# Installs busybox
download_file(busybox_url(arch),
target / 'busybox',
'busybox-%s' % arch)
fp.write('COPY busybox /busybox\n')
# Installs rpzsudo
download_file(sudo_url(arch),
target / 'rpzsudo',
'rpzsudo-%s' % arch)
fp.write('COPY rpzsudo /rpzsudo\n\n')
fp.write('COPY data.tgz /reprozip_data.tgz\n\n')
fp.write('COPY rpz-files.list /rpz-files.list\n')
fp.write('RUN \\\n'
' chmod +x /busybox /rpzsudo && \\\n')
if args.install_pkgs:
# Install every package through package manager
missing_packages = []
else:
# Only install packages that were not packed
missing_packages = [pkg for pkg in packages if pkg.packfiles]
packages = [pkg for pkg in packages if not pkg.packfiles]
if packages:
record_usage(docker_install_pkgs=True)
try:
installer = select_installer(pack, runs, target_distribution)
except CantFindInstaller as e:
logging.error("Need to install %d packages but couldn't "
"select a package installer: %s",
len(packages), e)
sys.exit(1)
# Updates package sources
fp.write(' %s && \\\n' % installer.update_script())
# Installs necessary packages
fp.write(' %s && \\\n' % installer.install_script(packages))
logging.info("Dockerfile will install the %d software packages "
"that were not packed", len(packages))
else:
record_usage(docker_install_pkgs=False)
# Untar
paths = set()
pathlist = []
# Adds intermediate directories, and checks for existence in the tar
missing_files = chain.from_iterable(pkg.files
for pkg in missing_packages)
for f in chain(other_files, missing_files):
path = PosixPath('/')
for c in rpz_pack.remove_data_prefix(f.path).components:
path = path / c
if path in paths:
continue
paths.add(path)
try:
rpz_pack.get_data(path)
except KeyError:
logging.info("Missing file %s", path)
else:
pathlist.append(path)
rpz_pack.close()
# FIXME : for some reason we need reversed() here, I'm not sure why.
# Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
with (target / 'rpz-files.list').open('wb') as lfp:
for p in reversed(pathlist):
lfp.write(join_root(rpz_pack.data_prefix, p).path)
lfp.write(b'\0')
fp.write(' cd / && '
'(tar zpxf /reprozip_data.tgz -U --recursive-unlink '
'--numeric-owner --strip=1 --null -T /rpz-files.list || '
'/busybox echo "TAR reports errors, this might or might '
'not prevent the execution to run")\n')
# Meta-data for reprounzip
write_dict(target / '.reprounzip', {})
signals.post_setup(target=target, pack=pack)
def docker_setup_create(args):
"""Sets up the experiment to be run in a Docker-built container.
"""
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logger.critical("Target directory exists")
sys.exit(1)
signals.pre_setup(target=target, pack=pack)
target.mkdir()
try:
# Unpacks configuration file
rpz_pack = RPZPack(pack)
rpz_pack.extract_config(target / 'config.yml')
# Loads config
runs, packages, other_files = config = load_config(
target / 'config.yml', True)
if args.base_image:
record_usage(docker_explicit_base=True)
base_image = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, base_image = select_image(runs)
logger.info("Using base image %s", base_image)
logger.debug("Distribution: %s", target_distribution or "unknown")
rpz_pack.copy_data_tar(target / 'data.tgz')
arch = runs[0]['architecture']
# Writes Dockerfile
logger.info("Writing %s...", target / 'Dockerfile')
with (target / 'Dockerfile').open('w', encoding='utf-8',
newline='\n') as fp:
fp.write('FROM %s\n\n' % base_image)
# Installs busybox
download_file(busybox_url(arch),
target / 'busybox',
'busybox-%s' % arch)
fp.write('COPY busybox /busybox\n')
# Installs rpzsudo
download_file(sudo_url(arch),
target / 'rpzsudo',
'rpzsudo-%s' % arch)
fp.write('COPY rpzsudo /rpzsudo\n\n')
fp.write('COPY data.tgz /reprozip_data.tgz\n\n')
fp.write('COPY rpz-files.list /rpz-files.list\n')
fp.write('RUN \\\n'
' chmod +x /busybox /rpzsudo && \\\n')
if args.install_pkgs:
# Install every package through package manager
missing_packages = []
else:
# Only install packages that were not packed
missing_packages = [pkg for pkg in packages if pkg.packfiles]
packages = [pkg for pkg in packages if not pkg.packfiles]
if packages:
record_usage(docker_install_pkgs=True)
try:
installer = select_installer(pack, runs,
target_distribution)
except CantFindInstaller as e:
logger.error("Need to install %d packages but couldn't "
"select a package installer: %s",
len(packages), e)
sys.exit(1)
# Updates package sources
update_script = installer.update_script()
if update_script:
fp.write(' %s && \\\n' % update_script)
# Installs necessary packages
fp.write(' %s && \\\n' % installer.install_script(packages))
logger.info("Dockerfile will install the %d software "
"packages that were not packed", len(packages))
else:
record_usage(docker_install_pkgs=False)
# Untar
paths = set()
pathlist = []
# Add intermediate directories, and check for existence in the tar
logger.info("Generating file list...")
missing_files = chain.from_iterable(pkg.files
for pkg in missing_packages)
data_files = rpz_pack.data_filenames()
listoffiles = list(chain(other_files, missing_files))
for f in listoffiles:
if f.path.name == 'resolv.conf' and (
f.path.lies_under('/etc') or
f.path.lies_under('/run') or
f.path.lies_under('/var')):
continue
path = PosixPath('/')
for c in rpz_pack.remove_data_prefix(f.path).components:
path = path / c
if path in paths:
continue
paths.add(path)
if path in data_files:
pathlist.append(path)
else:
logger.info("Missing file %s", path)
rpz_pack.close()
# FIXME : for some reason we need reversed() here, I'm not sure why
# Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
with (target / 'rpz-files.list').open('wb') as lfp:
for p in reversed(pathlist):
lfp.write(join_root(rpz_pack.data_prefix, p).path)
lfp.write(b'\0')
fp.write(' cd / && '
'(tar zpxf /reprozip_data.tgz -U --recursive-unlink '
'--numeric-owner --strip=1 --null -T /rpz-files.list || '
'/busybox echo "TAR reports errors, this might or might '
'not prevent the execution to run")\n')
# Setup entry point
fp.write('COPY rpz_entrypoint.sh /rpz_entrypoint.sh\n'
'ENTRYPOINT ["/busybox", "sh", "/rpz_entrypoint.sh"]\n')
# Write entry point script
logger.info("Writing %s...", target / 'rpz_entrypoint.sh')
with (target / 'rpz_entrypoint.sh').open('w', encoding='utf-8',
newline='\n') as fp:
# The entrypoint gets some arguments from the run command
# By default, it just does all the runs
# "run N" executes the run with that number
# "cmd STR" sets a replacement command-line for the next run
# "do STR" executes a command as-is
fp.write(
'#!/bin/sh\n'
'\n'
'COMMAND=\n'
'ENVVARS=\n'
'\n'
'if [ $# = 0 ]; then\n'
' exec /busybox sh /rpz_entrypoint.sh')
for nb in irange(len(runs)):
fp.write(' run %d' % nb)
fp.write(
'\n'
'fi\n'
'\n'
'while [ $# != 0 ]; do\n'
' case "$1" in\n'
' help)\n'
' echo "Image built from reprounzip-docker" >&2\n'
' echo "Usage: docker run <image> [cmd "word [word '
'...]"] [run <R>]" >&2\n'
' echo " \\`cmd ...\\` changes the command for '
'the next \\`run\\` option" >&2\n'
' echo " \\`run <name|number>\\` runs the '
'specified run" >&2\n'
' echo "By default, all the runs are executed." '
'>&2\n'
' echo "The runs in this image are:" >&2\n')
for run in runs:
fp.write(
' echo " {name}: {cmdline}" >&2\n'.format(
name=run['id'],
cmdline=' '.join(shell_escape(a)
for a in run['argv'])))
fp.write(
' exit 0\n'
' ;;\n'
' do)\n'
' shift\n'
' $1\n'
' ;;\n'
' env)\n'
' shift\n'
' ENVVARS="$1"\n'
' ;;\n'
' cmd)\n'
' shift\n'
' COMMAND="$1"\n'
' ;;\n'
' run)\n'
' shift\n'
' case "$1" in\n')
for i, run in enumerate(runs):
cmdline = ' '.join([run['binary']] + run['argv'][1:])
fp.write(
' {name})\n'
' RUNCOMMAND={cmd}\n'
' RUNWD={wd}\n'
' RUNENV={env}\n'
' RUNUID={uid}\n'
' RUNGID={gid}\n'
' ;;\n'.format(
name='%s|%d' % (run['id'], i),
cmd=shell_escape(cmdline),
wd=shell_escape(run['workingdir']),
env=shell_escape(' '.join(
'%s=%s' % (shell_escape(k), shell_escape(v))
for k, v in iteritems(run['environ']))),
uid=run.get('uid', 1000),
gid=run.get('gid', 1000)))
fp.write(
' *)\n'
' echo "RPZ: Unknown run $1" >&2\n'
' exit 1\n'
' ;;\n'
' esac\n'
' if [ -n "$COMMAND" ]; then\n'
' RUNCOMMAND="$COMMAND"\n'
' COMMAND=\n'
' fi\n'
' export RUNWD; export RUNENV; export ENVVARS; '
'export RUNCOMMAND\n'
' /rpzsudo "#$RUNUID" "#$RUNGID" /busybox sh -c '
'"cd \\"\\$RUNWD\\" && /busybox env -i $RUNENV $ENVVARS '
'$RUNCOMMAND; echo \\"*** Command finished, status: \\$?\\""\n'
' ENVVARS=\n'
' ;;\n'
' *)\n'
' echo "RPZ: Unknown option $1" >&2\n'
' exit 1\n'
' ;;\n'
' esac\n'
' shift\n'
'done\n')
# Meta-data for reprounzip
write_dict(target, metadata_initial_iofiles(config))
signals.post_setup(target=target, pack=pack)
except Exception:
target.rmtree(ignore_errors=True)
raise
def vagrant_setup_create(args):
"""Sets up the experiment to be run in a Vagrant-built virtual machine.
This can either build a chroot or not.
If building a chroot, we do just like without Vagrant: we copy all the
files and only get what's missing from the host. But we do install
automatically the packages whose files are required.
If not building a chroot, we install all the packages, and only unpack
files that don't come from packages.
In short: files from packages with packfiles=True will only be used if
building a chroot.
"""
if not args.pack:
logging.critical("setup/create needs the pack filename")
sys.exit(1)
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logging.critical("Target directory exists")
sys.exit(1)
use_chroot = args.use_chroot
mount_bind = args.bind_magic_dirs
record_usage(use_chroot=use_chroot, mount_bind=mount_bind)
signals.pre_setup(target=target, pack=pack)
# Unpacks configuration file
tar = tarfile.open(str(pack), 'r:*')
member = tar.getmember('METADATA/config.yml')
member.name = 'config.yml'
tar.extract(member, str(target))
tar.close()
# Loads config
runs, packages, other_files = load_config(target / 'config.yml', True)
if args.base_image and args.base_image[0]:
record_usage(vagrant_explicit_image=True)
box = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, box = select_box(runs)
logging.info("Using box %s", box)
logging.debug("Distribution: %s", target_distribution or "unknown")
# If using chroot, we might still need to install packages to get missing
# (not packed) files
if use_chroot:
packages = [pkg for pkg in packages if not pkg.packfiles]
if packages:
record_usage(vagrant_install_pkgs=True)
logging.info(
"Some packages were not packed, so we'll install and "
"copy their files\n"
"Packages that are missing:\n%s",
' '.join(pkg.name for pkg in packages))
if packages:
try:
installer = select_installer(pack, runs, target_distribution)
except CantFindInstaller as e:
logging.error(
"Need to install %d packages but couldn't select a "
"package installer: %s", len(packages), e)
target.mkdir(parents=True)
# Writes setup script
logging.info("Writing setup script %s...", target / 'setup.sh')
with (target / 'setup.sh').open('w', encoding='utf-8', newline='\n') as fp:
fp.write('#!/bin/sh\n\nset -e\n\n')
if packages:
# Updates package sources
fp.write(installer.update_script())
fp.write('\n')
# Installs necessary packages
fp.write(installer.install_script(packages))
fp.write('\n')
# TODO : Compare package versions (painful because of sh)
# Untar
if use_chroot:
fp.write('\n' 'mkdir /experimentroot; cd /experimentroot\n')
fp.write('tar zpxf /vagrant/experiment.rpz '
'--numeric-owner --strip=1 DATA\n')
if mount_bind:
fp.write('\n'
'mkdir -p /experimentroot/dev\n'
'mount -o rbind /dev /experimentroot/dev\n'
'mkdir -p /experimentroot/proc\n'
'mount -o rbind /proc /experimentroot/proc\n')
for pkg in packages:
fp.write('\n# Copies files from package %s\n' % pkg.name)
for f in pkg.files:
f = f.path
dest = join_root(PosixPath('/experimentroot'), f)
fp.write('mkdir -p %s\n' %
shell_escape(unicode_(f.parent)))
fp.write('cp -L %s %s\n' % (shell_escape(
unicode_(f)), shell_escape(unicode_(dest))))
else:
fp.write('\ncd /\n')
paths = set()
pathlist = []
dataroot = PosixPath('DATA')
# Adds intermediate directories, and checks for existence in the
# tar
tar = tarfile.open(str(pack), 'r:*')
for f in other_files:
path = PosixPath('/')
for c in f.path.components[1:]:
path = path / c
if path in paths:
continue
paths.add(path)
datapath = join_root(dataroot, path)
try:
tar.getmember(str(datapath))
except KeyError:
logging.info("Missing file %s", datapath)
else:
pathlist.append(unicode_(datapath))
tar.close()
# FIXME : for some reason we need reversed() here, I'm not sure
# why. Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
# TAR bug: there is no way to make --keep-old-files not report an
# error if an existing file is encountered. --skip-old-files was
# introduced too recently. Instead, we just ignore the exit status
fp.write('tar zpxf /vagrant/experiment.rpz --keep-old-files '
'--numeric-owner --strip=1 %s || /bin/true\n' %
' '.join(shell_escape(p) for p in reversed(pathlist)))
# Copies /bin/sh + dependencies
if use_chroot:
url = busybox_url(runs[0]['architecture'])
fp.write(r'''
mkdir -p /experimentroot/bin
mkdir -p /experimentroot/usr/bin
if [ ! -e /experimentroot/bin/sh -o ! -e /experimentroot/usr/bin/env ]; then
wget --quiet -O /experimentroot/bin/busybox {url}
chmod +x /experimentroot/bin/busybox
fi
[ -e /experimentroot/bin/sh ] || \
ln -s /bin/busybox /experimentroot/bin/sh
[ -e /experimentroot/usr/bin/env ] || \
ln -s /bin/busybox /experimentroot/usr/bin/env
'''.format(url=url))
# Copies pack
logging.info("Copying pack file...")
pack.copyfile(target / 'experiment.rpz')
# Writes Vagrant file
logging.info("Writing %s...", target / 'Vagrantfile')
with (target / 'Vagrantfile').open('w', encoding='utf-8',
newline='\n') as fp:
# Vagrant header and version
fp.write('# -*- mode: ruby -*-\n'
'# vi: set ft=ruby\n\n'
'VAGRANTFILE_API_VERSION = "2"\n\n'
'Vagrant.configure(VAGRANTFILE_API_VERSION) do |config|\n')
# Selects which box to install
fp.write(' config.vm.box = "%s"\n' % box)
# Run the setup script on the virtual machine
fp.write(' config.vm.provision "shell", path: "setup.sh"\n')
fp.write('end\n')
# Meta-data for reprounzip
write_dict(target / '.reprounzip', {'use_chroot': use_chroot})
signals.post_setup(target=target)
def vagrant_setup_create(args):
"""Sets up the experiment to be run in a Vagrant-built virtual machine.
This can either build a chroot or not.
If building a chroot, we do just like without Vagrant: we copy all the
files and only get what's missing from the host. But we do install
automatically the packages whose files are required.
If not building a chroot, we install all the packages, and only unpack
files that don't come from packages.
In short: files from packages with packfiles=True will only be used if
building a chroot.
"""
if not args.pack:
logging.critical("setup/create needs the pack filename")
sys.exit(1)
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logging.critical("Target directory exists")
sys.exit(1)
use_chroot = args.use_chroot
mount_bind = args.bind_magic_dirs
record_usage(use_chroot=use_chroot,
mount_bind=mount_bind)
signals.pre_setup(target=target, pack=pack)
# Unpacks configuration file
rpz_pack = RPZPack(pack)
rpz_pack.extract_config(target / 'config.yml')
# Loads config
runs, packages, other_files = config = load_config(target / 'config.yml',
True)
if not args.memory:
memory = None
else:
try:
memory = int(args.memory[-1])
except ValueError:
logging.critical("Invalid value for memory size: %r", args.memory)
sys.exit(1)
if args.base_image and args.base_image[0]:
record_usage(vagrant_explicit_image=True)
box = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, box = select_box(runs, gui=args.gui)
logging.info("Using box %s", box)
logging.debug("Distribution: %s", target_distribution or "unknown")
# If using chroot, we might still need to install packages to get missing
# (not packed) files
if use_chroot:
packages = [pkg for pkg in packages if not pkg.packfiles]
if packages:
record_usage(vagrant_install_pkgs=True)
logging.info("Some packages were not packed, so we'll install and "
"copy their files\n"
"Packages that are missing:\n%s",
' '.join(pkg.name for pkg in packages))
if packages:
try:
installer = select_installer(pack, runs, target_distribution)
except CantFindInstaller as e:
logging.error("Need to install %d packages but couldn't select a "
"package installer: %s",
len(packages), e)
target.mkdir(parents=True)
try:
# Writes setup script
logging.info("Writing setup script %s...", target / 'setup.sh')
with (target / 'setup.sh').open('w', encoding='utf-8',
newline='\n') as fp:
fp.write('#!/bin/sh\n\nset -e\n\n')
if packages:
# Updates package sources
update_script = installer.update_script()
if update_script:
fp.write(update_script)
fp.write('\n')
# Installs necessary packages
fp.write(installer.install_script(packages))
fp.write('\n')
# TODO : Compare package versions (painful because of sh)
# Untar
if use_chroot:
fp.write('\n'
'mkdir /experimentroot; cd /experimentroot\n')
fp.write('tar zpxf /vagrant/data.tgz --numeric-owner '
'--strip=1 %s\n' % rpz_pack.data_prefix)
if mount_bind:
fp.write('\n'
'mkdir -p /experimentroot/dev\n'
'mkdir -p /experimentroot/proc\n')
for pkg in packages:
fp.write('\n# Copies files from package %s\n' % pkg.name)
for f in pkg.files:
f = f.path
dest = join_root(PosixPath('/experimentroot'), f)
fp.write('mkdir -p %s\n' %
shell_escape(unicode_(f.parent)))
fp.write('cp -L %s %s\n' % (
shell_escape(unicode_(f)),
shell_escape(unicode_(dest))))
fp.write(
'\n'
'cp /etc/resolv.conf /experimentroot/etc/resolv.conf\n')
else:
fp.write('\ncd /\n')
paths = set()
pathlist = []
# Adds intermediate directories, and checks for existence in
# the tar
logging.info("Generating file list...")
data_files = rpz_pack.data_filenames()
for f in other_files:
if f.path.name == 'resolv.conf' and (
f.path.lies_under('/etc') or
f.path.lies_under('/run') or
f.path.lies_under('/var')):
continue
path = PosixPath('/')
for c in rpz_pack.remove_data_prefix(f.path).components:
path = path / c
if path in paths:
continue
paths.add(path)
if path in data_files:
pathlist.append(path)
else:
logging.info("Missing file %s", path)
# FIXME : for some reason we need reversed() here, I'm not sure
# why. Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
# TAR bug: there is no way to make --keep-old-files not report
# an error if an existing file is encountered. --skip-old-files
# was introduced too recently. Instead, we just ignore the exit
# status
with (target / 'rpz-files.list').open('wb') as lfp:
for p in reversed(pathlist):
lfp.write(join_root(rpz_pack.data_prefix, p).path)
lfp.write(b'\0')
fp.write('tar zpxf /vagrant/data.tgz --keep-old-files '
'--numeric-owner --strip=1 '
'--null -T /vagrant/rpz-files.list || /bin/true\n')
# Copies busybox
if use_chroot:
arch = runs[0]['architecture']
download_file(busybox_url(arch),
target / 'busybox',
'busybox-%s' % arch)
fp.write(r'''
cp /vagrant/busybox /experimentroot/busybox
chmod +x /experimentroot/busybox
mkdir -p /experimentroot/bin
[ -e /experimentroot/bin/sh ] || \
ln -s /busybox /experimentroot/bin/sh
''')
# Copies pack
logging.info("Copying pack file...")
rpz_pack.copy_data_tar(target / 'data.tgz')
rpz_pack.close()
# Writes Vagrant file
logging.info("Writing %s...", target / 'Vagrantfile')
with (target / 'Vagrantfile').open('w', encoding='utf-8',
newline='\n') as fp:
# Vagrant header and version
fp.write(
'# -*- mode: ruby -*-\n'
'# vi: set ft=ruby\n\n'
'VAGRANTFILE_API_VERSION = "2"\n\n'
'Vagrant.configure(VAGRANTFILE_API_VERSION) do |config|\n')
# Selects which box to install
fp.write(' config.vm.box = "%s"\n' % box)
# Run the setup script on the virtual machine
fp.write(' config.vm.provision "shell", path: "setup.sh"\n')
# Memory size
if memory is not None or args.gui:
fp.write(' config.vm.provider "virtualbox" do |v|\n')
if memory is not None:
fp.write(' v.memory = %d\n' % memory)
if args.gui:
fp.write(' v.gui = true\n')
fp.write(' end\n')
fp.write('end\n')
# Meta-data for reprounzip
write_dict(target,
metadata_initial_iofiles(config,
{'use_chroot': use_chroot,
'gui': args.gui}))
signals.post_setup(target=target, pack=pack)
except Exception:
target.rmtree(ignore_errors=True)
raise
def vagrant_setup_create(args):
"""Sets up the experiment to be run in a Vagrant-built virtual machine.
This can either build a chroot or not.
If building a chroot, we do just like without Vagrant: we copy all the
files and only get what's missing from the host. But we do install
automatically the packages whose files are required.
If not building a chroot, we install all the packages, and only unpack
files that don't come from packages.
In short: files from packages with packfiles=True will only be used if
building a chroot.
"""
if not args.pack:
logging.critical("setup/create needs the pack filename")
sys.exit(1)
pack = Path(args.pack[0])
target = Path(args.target[0])
if target.exists():
logging.critical("Target directory exists")
sys.exit(1)
use_chroot = args.use_chroot
mount_bind = args.bind_magic_dirs
record_usage(use_chroot=use_chroot,
mount_bind=mount_bind)
signals.pre_setup(target=target, pack=pack)
# Unpacks configuration file
tar = tarfile.open(str(pack), 'r:*')
member = tar.getmember('METADATA/config.yml')
member.name = 'config.yml'
tar.extract(member, str(target))
tar.close()
# Loads config
runs, packages, other_files = load_config(target / 'config.yml', True)
if args.base_image and args.base_image[0]:
record_usage(vagrant_explicit_image=True)
box = args.base_image[0]
if args.distribution:
target_distribution = args.distribution[0]
else:
target_distribution = None
else:
target_distribution, box = select_box(runs)
logging.info("Using box %s", box)
logging.debug("Distribution: %s", target_distribution or "unknown")
# If using chroot, we might still need to install packages to get missing
# (not packed) files
if use_chroot:
packages = [pkg for pkg in packages if not pkg.packfiles]
if packages:
record_usage(vagrant_install_pkgs=True)
logging.info("Some packages were not packed, so we'll install and "
"copy their files\n"
"Packages that are missing:\n%s",
' '.join(pkg.name for pkg in packages))
if packages:
try:
installer = select_installer(pack, runs, target_distribution)
except CantFindInstaller as e:
logging.error("Need to install %d packages but couldn't select a "
"package installer: %s",
len(packages), e)
target.mkdir(parents=True)
# Writes setup script
logging.info("Writing setup script %s...", target / 'setup.sh')
with (target / 'setup.sh').open('w', encoding='utf-8', newline='\n') as fp:
fp.write('#!/bin/sh\n\nset -e\n\n')
if packages:
# Updates package sources
fp.write(installer.update_script())
fp.write('\n')
# Installs necessary packages
fp.write(installer.install_script(packages))
fp.write('\n')
# TODO : Compare package versions (painful because of sh)
# Untar
if use_chroot:
fp.write('\n'
'mkdir /experimentroot; cd /experimentroot\n')
fp.write('tar zpxf /vagrant/experiment.rpz '
'--numeric-owner --strip=1 DATA\n')
if mount_bind:
fp.write('\n'
'mkdir -p /experimentroot/dev\n'
'mount -o rbind /dev /experimentroot/dev\n'
'mkdir -p /experimentroot/proc\n'
'mount -o rbind /proc /experimentroot/proc\n')
for pkg in packages:
fp.write('\n# Copies files from package %s\n' % pkg.name)
for f in pkg.files:
f = f.path
dest = join_root(PosixPath('/experimentroot'), f)
fp.write('mkdir -p %s\n' %
shell_escape(unicode_(f.parent)))
fp.write('cp -L %s %s\n' % (
shell_escape(unicode_(f)),
shell_escape(unicode_(dest))))
else:
fp.write('\ncd /\n')
paths = set()
pathlist = []
dataroot = PosixPath('DATA')
# Adds intermediate directories, and checks for existence in the
# tar
tar = tarfile.open(str(pack), 'r:*')
for f in other_files:
path = PosixPath('/')
for c in f.path.components[1:]:
path = path / c
if path in paths:
continue
paths.add(path)
datapath = join_root(dataroot, path)
try:
tar.getmember(str(datapath))
except KeyError:
logging.info("Missing file %s", datapath)
else:
pathlist.append(unicode_(datapath))
tar.close()
# FIXME : for some reason we need reversed() here, I'm not sure
# why. Need to read more of tar's docs.
# TAR bug: --no-overwrite-dir removes --keep-old-files
# TAR bug: there is no way to make --keep-old-files not report an
# error if an existing file is encountered. --skip-old-files was
# introduced too recently. Instead, we just ignore the exit status
fp.write('tar zpxf /vagrant/experiment.rpz --keep-old-files '
'--numeric-owner --strip=1 %s || /bin/true\n' %
' '.join(shell_escape(p) for p in reversed(pathlist)))
# Copies /bin/sh + dependencies
if use_chroot:
url = busybox_url(runs[0]['architecture'])
fp.write(r'''
mkdir -p /experimentroot/bin
mkdir -p /experimentroot/usr/bin
if [ ! -e /experimentroot/bin/sh -o ! -e /experimentroot/usr/bin/env ]; then
wget --quiet -O /experimentroot/bin/busybox {url}
chmod +x /experimentroot/bin/busybox
fi
[ -e /experimentroot/bin/sh ] || \
ln -s /bin/busybox /experimentroot/bin/sh
[ -e /experimentroot/usr/bin/env ] || \
ln -s /bin/busybox /experimentroot/usr/bin/env
'''.format(url=url))
# Copies pack
logging.info("Copying pack file...")
pack.copyfile(target / 'experiment.rpz')
# Writes Vagrant file
logging.info("Writing %s...", target / 'Vagrantfile')
with (target / 'Vagrantfile').open('w', encoding='utf-8',
newline='\n') as fp:
# Vagrant header and version
fp.write('# -*- mode: ruby -*-\n'
'# vi: set ft=ruby\n\n'
'VAGRANTFILE_API_VERSION = "2"\n\n'
'Vagrant.configure(VAGRANTFILE_API_VERSION) do |config|\n')
# Selects which box to install
fp.write(' config.vm.box = "%s"\n' % box)
# Run the setup script on the virtual machine
fp.write(' config.vm.provision "shell", path: "setup.sh"\n')
fp.write('end\n')
# Meta-data for reprounzip
write_dict(target / '.reprounzip', {'use_chroot': use_chroot})
signals.post_setup(target=target)
