Beispiel #1
0
def main():
    print('WARNING: THIS OPTION SHOULD BE USED TO PROVISION A *SECNET* ILO SEGMENT')
    print('(NOT COMMON - ONLY SOME ACCENTURE ACCOUNTS HAVE THIS)\n')

    ##### Prompts to enter username, password, and allocation code:
    [username,password,alloccode] = getUPA()

    ##### Prompts to enter SIDs/speed/locations
    [mfw,speed,mfwloc,ips,ipsloc] = getDevices('firewall')

    print('OK\nNow let\'s define a SECNET iLO segment.\n')

    ###### STANDARD BACK SEGMENT
    # 1. VLAN:
    while True:
        try:
            iloVlan = getVLAN('SecNet iLO',[])
            if 900 <= iloVlan <= 949:
                break
            else:
                print('ERROR: ILO VLAN MUST BE BETWEEN 900 AND 949.\n')
        except AtrributeError:
            print('ERROR: AttributeError.\n')

    # 2. DEPTHCODE:
    iloDepth = getDepth('firewall','9901',[])

    # 3. ILO SUBNET:
    if mfwloc.site == 'iad':
        ilonet = ip_network('10.176.0.0/16')
    else:
        ilonet = ip_network('10.177.0.0/16')

    # 4. FIREWALL INTERFACE:
    while True:
        try:
            fw_interface = input('Enter the firewall interface for the iLO segment (e.g, eth1, s1p1, gi0/4, etc.): ').strip()
            if fw_interface in devicePorts(mfw):
                break
            else:
                print('ERROR: INVALID INTERFACE\n')
        except AttributeError:
            print('ERROR: INVALID INTERFACE\n')

    # 5. SWITCHPORT NUMBER:
    while True:
        try:
            swpt_number = int(input('Pick the first available port on mod 4 of '+mfwloc.findsecsw()+': '))
            if 1 <= swpt_number <= 48:
                break
            else:
                print('ERROR: NUMBER OUT OF RANGE\n')
        except (AttributeError,ValueError):
            print('ERROR: INVALID DATA\n')
    
    # 6. VRRP IP:
    while True:
        try:
            vrrp_ip = ip_address(input('Enter the IP address of the iLO gateway/VRRP interface (e.g., 10.176.128.9): '))
            if vrrp_ip in ilonet:
                break
            else:
                print('ERROR: '+str(vrrp_ip)+' does not belong to '+str(ilonet)+'.\n')
        except ValueError:
            print('ERROR: INVALID ADDRESS/NETMASK\n')


    #############################################################################
    print('\nThe rest will generate port configs, custom cabling info, allocation form, etc.\n')
    
    # back up port configs
    print('***************************************')
    print('Collecting switchport backup configs...')
    print('***************************************\n')
    
    try:
        child = pexpect.spawnu('telnet '+mfwloc.findsecsw()+'.dn.net')
        child.expect('Username: '******'Password: '******'6513-'+mfwloc.findsecsw()+'-sec-c\d{1,2}#',timeout=3)
        print(mfwloc.findsecsw()+':\n')
        child.sendline('sh run int gi4/'+str(swpt_number))
        child.expect('6513-'+mfwloc.findsecsw()+'-sec-c\d{1,2}#')
        print(child.before)
        child.sendline('exit')
    except (EOF,TIMEOUT,ExceptionPexpect):
        print('ERROR: Unable to collect switchport configs from '+mfwloc.findsecsw())
        print('Try collecting configs manually instead:')
        print()
        print('  '+mfwloc.findsecsw()+':')
        print('    sh run int gi4/'+str(swpt_number))
        print()
    
    input('Hit Enter to view the new switchport configs.')
    print()
    # new port configs
    print('*************************************************')
    print('Use the following to apply new switchport configs')
    print('*************************************************\n')
    
    swconf = 'telnet '+mfwloc.findsecsw()+'\n'
    swconf += username+'\n'
    swconf += password+'\n'
    swconf += 'conf t\n'
    swconf += 'int gi4/'+str(swpt_number)+'\n'
    swconf += ' description '+alloccode+'-'+iloDepth+' '+mfw+' back\n'
    swconf += ' switchport\n'
    swconf += ' switchport access vlan '+str(iloVlan)+'\n'
    swconf += ' switchport private-vlan host-association 11 '+str(iloVlan)+'\n'
    swconf += ' switchport mode private-vlan host\n'
    swconf += ' speed '+speed+'\n'
    swconf += ' duplex full\n'
    swconf += ' spanning-tree portfast edge\n'
    swconf += ' no shut\n'
    swconf += ' end\n'
    print(swconf)
    input('Hit Enter to view the custom cabling information')
    print()
    # cabling instructions
    print('CUSTOM CABLING INFORMATION:')
    print('---------------------------\n')
    print()
    print('iLO:')
    print('  '+mfw+' '+fw_interface+' -> GREEN STRAIGHT -> '+mfwloc.findsecsw()+' gi4/'+str(swpt_number)+' (Direct run no patch)')
    print()
    input('Hit Enter to view the firewall allocation form')
    print()
    # Firewall allocation form
    print('**Add the following to the firewall allocation section:\n\n')
    HAdeviceForm = 'FIREWALL NETWORK INFORMATION:\n'
    HAdeviceForm += '------------------------------\n\n'

    HAdeviceForm += '**iLO (Network '+iloDepth+'):\n\n'
    
    HAdeviceForm += '  Physical Interface: '+fw_interface+'\n\n'
    
    HAdeviceForm += '  Back Interface:   '+str(vrrp_ip)+' (gateway for servers)\n'
    HAdeviceForm += '  Back Network:     '+str(ilonet)+'\n'
    HAdeviceForm += '  Back Netmask:     '+str(ilonet.netmask)+'\n\n'

    HAdeviceForm += '  Connection To:    '+mfwloc.findsecsw()+'\n'
    HAdeviceForm += '  Connection Port:  gi4/'+str(swpt_number)+'\n\n'

    HAdeviceForm += '  SwitchPort Speed/Duplex set to: '+speed+'M/Full\n'
    HAdeviceForm += '   (Firewalls should be set to the same speed)\n'
    HAdeviceForm += '  SecNet Community VLAN (Num/Label): '+str(iloVlan)+'/ilonet_'+alloccode+'\n\n'

    print(HAdeviceForm)
Beispiel #2
0
def main():
    ##### Prompts to enter username, password, and allocation code:
    [username,password,alloccode] = getUPA()

    ##### Prompts to enter SIDs/speed/locations of HA pair & IPS:
    [mfw,speed,mfwloc,sfw,sfwloc,ips,ipsloc] = getHAdevices('loadbalancer')

    ###### Summary Output of Devices:
    showSummaryHA(mfw,mfwloc,sfw,sfwloc,ips,ipsloc)

    ###### Prompts to select a sync port:
    syncInt = chooseSyncInt(mfw)
    availPorts = devicePorts(mfw)
    if syncInt != 'none':
        availPorts.remove(syncInt)
    
    ###### FRONT SEGMENT
    # 1. VLAN:
    Vlans = [] # FW vlans. ipsmgtVlan will not be included.
    frontVlan = getVLAN('the loadbalancer front',Vlans)
    Vlans.append(frontVlan)

    # 2. DEPTHCODE:
    Depths = []
    frontdepth = getDepth('loadbalancer','0101',Depths)
    Depths.append(frontdepth)

    # 3. SUBNETS:
    frontnet = getSubnets('the loadbalancer front',mfw)
    if len(frontnet)>1:
        print('WARNING: The loadbalancer front accepts a single subnet. Only the first subnet was accepted.\n')

    print('OK\nNow let\'s define loadbalancer back segments, one by one.\n')

    ###### STANDARD BACK SEGMENT
    # 1. NAME:
    Segments = ['front']  # FW segment names
    SegmentsL = ['front'] # FW segment names with all chars lowered, for uniqueness checks.
    backName = getUniqueSegmentName(SegmentsL)
    Segments.append(backName)
    SegmentsL.append(backName.lower())

    # 2. VLAN:
    backVlan = getVLAN(backName,Vlans)
    Vlans.append(backVlan)

    # 3. DEPTHCODE:
    backdepth = getDepth('loadbalancer','0201',Depths)
    Depths.append(backdepth)

    # 4. SUBNETS:
    backnets = getSubnets(backName,mfw)

    # 5. IPS QUESTION:
    monitored = 0
    Sniff = ['n']
    [monitored,Sniff] = askifMonitor(ips,monitored,Sniff)

    Ports = [1,16]  # FW segment ports. First two for front & back (1,16) are fake.
    SubnetLists = [frontnet,backnets]
    ###### 'ADD?' ######
    add_more_segment = addQuestion()
    
    #################### LOOP - BACK SEGMENTS ADDITIONS ########################
    while add_more_segment == 'y':

        ###### CHOOSE AUX PORT ######
        auxport = pickPort(mfwloc,Ports)
        Ports.append(auxport)

        ###### CREATE SEGMENT NAME ######
        auxsegment = getUniqueSegmentName(SegmentsL)
        Segments.append(auxsegment)
        SegmentsL.append(auxsegment.lower())

        ###### CHOOSE VLAN ######
        auxvlan = getVLAN(auxsegment,Vlans)
        Vlans.append(auxvlan)

        ###### CHOOSE DEPTH CODE ######
        auxdepth = getDepth('loadbalancer','0202',Depths)
        Depths.append(auxdepth)

        ###### CHOOSE SUBNETS ######
        SubnetLists.append(getSubnets(auxsegment,mfw))

        ###### IPS OPTION ######
        [monitored,Sniff] = askifMonitor(ips,monitored,Sniff)

        ###### 'ADD?' ######
        add_more_segment = addQuestion()

    ############################## END OF LOOP #################################
    ###### IPS MANAGEMENT
    if ips != 'none':
        # 1. VLAN:
        print('\nNow choose the IPS management VLAN.\n'
              +'It can be any one of the VLANs that you allocated to this customer.\n'
              +'However, try avoiding a VLAN that is widely exposed to the Internet.')
        ipsmgtVlan = getIpsVLAN('loadbalancer',frontVlan)

        # 2. DEPTH CODE:
        ipsmgtDepth = getIPSDepth(Vlans,ipsmgtVlan,Depths)
    
        # 3. IP ADDRESS:
        ipsmgtIPaddr = getInterfaceIP('the IPS management')

    #############################################################################
    print('\nThe rest will generate port configs, custom cabling info, allocation form, etc.\n')

    # SVIs backup and configs
    if frontdepth == '0001':
        makeSVI(username,password,mfwloc,frontVlan,alloccode,frontnet)

    input('Hit Enter to collect switchport backup configs.')
    print()

    # back up port configs
    backupPortsHA(mfwloc,ipsloc,username,password,Ports,ips)

    input('Hit Enter to view the new switchport configs.')
    print()
    # new port configs
    print('*******************************')
    print('New switchport configs to apply')
    print('*******************************\n')
    
    swconfigs = [(mfwloc,'m',mfw,'5'),(sfwloc,'s',sfw,'6')]
    for loc,role,sid,mod in swconfigs:
        swconf = 'telnet '+loc.findsw()+'\n'
        swconf += username+'\n'
        swconf += password+'\n'
        swconf += 'conf t\n'
        swconf += 'int '+loc.findfrport()+'\n'
        swconf += ' description '+loc.rrs.replace('.','-')+'-'+role+'fr '+alloccode+'-'+Depths[0]+' '+sid+' front\n'
        swconf += ' switchport\n'
        swconf += ' switchport access vlan '+str(Vlans[0])+'\n'
        swconf += ' switchport mode access\n'
        swconf += ' speed auto\n'
        swconf += ' no duplex\n'
        swconf += ' flowcontrol receive on\n'
        swconf += ' spanning-tree portfast edge\n'
        swconf += ' no shut\n'
        swconf += '!\n'
        swconf += 'int '+loc.findbkport()+'\n'
        swconf += ' description '+loc.rrs.replace('.','-')+'-'+role+'bk '+alloccode+'-'+Depths[1]+' '+sid+' back\n'
        swconf += ' switchport\n'
        swconf += ' switchport access vlan '+str(Vlans[1])+'\n'
        swconf += ' switchport mode access\n'
        swconf += ' speed auto\n'
        swconf += ' no duplex\n'
        swconf += ' flowcontrol receive on\n'
        swconf += ' spanning-tree portfast edge\n'
        swconf += ' no shut\n'
        swconf += '!\n'
        aux = 2
        for port in Ports[2:]:
            swconf += 'int gi'+loc.findmod()+'/'+str(port)+'\n'
            swconf += ' description '+loc.rrs.replace('.','-')+'-'+role+'b'+str(aux)+' '+alloccode+'-'+Depths[aux]+' '+sid+' back'+str(aux)+'\n'
            swconf += ' switchport\n'
            swconf += ' switchport access vlan '+str(Vlans[aux])+'\n'
            swconf += ' switchport mode access\n'
            swconf += ' speed auto\n'
            swconf += ' no duplex\n'
            swconf += ' flowcontrol receive on\n'
            swconf += ' spanning-tree portfast edge\n'
            swconf += ' no shut\n'
            swconf += '!\n'
            aux += 1
        if ips != 'none' and loc.findsw() == ipsloc.findsw():
            swconf += 'int '+ipsloc.findfrport()+'\n'
            swconf += ' description RESERVED: '+ipsloc.rrs.replace('.','-')+'-fr '+alloccode+' '+ips+'\n'
            swconf += ' switchport\n'
            swconf += ' switchport access vlan 133\n'
            swconf += ' switchport mode access\n'
            swconf += ' spanning-tree portfast edge\n'
            swconf += ' shut\n'
            swconf += '!\n'
            swconf += 'int '+ipsloc.findbkport()+'\n'
            swconf += ' description '+ipsloc.rrs.replace('.','-')+'-bk '+alloccode+'-'+ipsmgtDepth+' '+ips+' mgmt\n'
            swconf += ' switchport\n'
            swconf += ' switchport access vlan '+str(ipsmgtVlan)+'\n'
            swconf += ' switchport mode access\n'
            swconf += ' speed 100\n'
            swconf += ' duplex full\n'
            swconf += ' spanning-tree portfast edge\n'
            swconf += ' no shut\n!\n'
        swconf += ' end\n'
        print(swconf)
    input('Hit Enter to view the custom cabling information')
    print()
    # cabling instructions
    site = mfwloc.site
    rs = mfwloc.rs
    if site == 'iad':
        nw_rs = ('3.1','3.2','3.3','3.4','3.5','3.6','3.7','3.8',
                 '3.9','3a.9','3.10','3a.10','3.11','3a.11','3.12','3a.12',
                 '3.13','3a.13','3.14','3a.14','3.15','3a.15','3.16','3a.16',
                 '3.17','3a.17','3.18','3a.18','3.19','3a.19','3.20','3a.20',
                 '12.1','12.2','12.3','12.4','12.5','12.6','12.7','12.8',
                 '12.9','12a.9','12.10','12a.10','12.11','12a.11','12.12','12a.12',
                 '12.13','12a.13','12.14','12a.14','12.15','12a.15','12.16','12a.16',
                 '12.17','12a.17','12.18','12a.18','12.19','12a.19','12.20','12a.20')
    else:
        nw_rs = ('3.1', '3a.1', '3.2', '3a.2', '3.3', '3a.3', '3.4', '3a.4', 
                 '3.5', '3a.5', '3.6', '3a.6', '3.7', '3a.7', '3.8', '3a.8',
                 '3.9', '3a.9', '3.10', '3a.10', '3.11', '3a.11', '3.12', '3a.12',
                 '3.13', '3a.13', '3.14', '3a.14', '3.15', '3a.15', '3.16', '3a.16',
                 '22.1', '22a.1', '22.2', '22a.2', '22.3', '22a.3', '22.4', '22a.4',
                 '22.5', '22a.5', '22.6', '22a.6', '22.7', '22a.7', '22.8', '22a.8',
                 '22.9', '22a.9', '22.10', '22a.10', '22.11', '22a.11', '22.12', '22a.12',
                 '22.13', '22a.13', '22.14', '22a.14', '22.15', '22a.15', '22.16', '22a.16')
    
    if site == 'iad':
        (sync,bk,bks) = ('51','50','49')
    else:
        (sync,bk,bks) = ('44','43','42')
    print('CUSTOM CABLING INFORMATION:')
    print('---------------------------\n')
    cabling = ''
    if syncInt != 'none':
        cabling += 'sync:\n'
        x = nw_rs.index(rs)
        cabling += '  '+mfw+' '+syncInt+' -> YELLOW XOVER -> U'+sync+' YELLOW PANEL p'+str(x+1 if x<=15 else x-31)+'\n'
        cabling += '  '+sfw+' '+syncInt+' -> YELLOW STRAIGHT -> U'+sync+' YELLOW PANEL p'+str(x+1 if x<=15 else x-31)+'\n\n'
    cumulative = 0
    if Sniff[1] == 'y':
        cumulative += 1
        cabling += backName+':\n'
        cabling += '  '+mfw+' '+availPorts[1]+' -> GREEN XOVER -> '+ips+' port 1A\n'
        cabling += '  '+ips+' port 1B -> GREEN STRAIGHT -> U'+bk+' UPPER ORANGE PANEL p'+str(nw_rs.index(rs)%16+17)+'\n\n'
    auxII = 2
    for segment in Segments[2:]:
        cabling += segment+':\n'
        if Sniff[auxII] == 'y':
            cumulative += 1
            cabling += '  '+mfw+' '+availPorts[auxII]+' -> GREEN XOVER -> '+ips+' port '+str('1A' if cumulative == 1 else '2C')+'\n'
            cabling += '  '+ips+' port '+str('1B' if cumulative == 1 else '2D')+' -> GREEN STRAIGHT -> U'+bk+' UPPER ORANGE PANEL p'+str(Ports[auxII])+'\n'
        else:
            cabling += '  '+mfw+' '+availPorts[auxII]+' -> GREEN STRAIGHT -> U'+bk+' UPPER ORANGE PANEL p'+str(Ports[auxII])+'\n'
        cabling += '  '+sfw+' '+availPorts[auxII]+' -> GREEN STRAIGHT -> U'+bks+' LOWER ORANGE PANEL p'+str(Ports[auxII])+'\n\n'
        auxII += 1
    print(cabling)
    input('Hit Enter to view the loadbalancer allocation form')
    print()
    # HA device pair allocation form
    if mfw.is_fw():
        devicetype = 'firewall'
    else:
        devicetype = 'loadbalancer'
    HAdeviceForm = 'LOAD-BALANCING INFORMATION:\n'
    HAdeviceForm += '------------------------------\n\n'
    HAdeviceForm += 'Allocation Code: '+alloccode+'\n\n'
    HAdeviceForm += 'Master '+devicetype.title()+' ID:        '+mfw+'\n'
    HAdeviceForm += 'Backup '+devicetype.title()+' ID:        '+sfw+'\n'
    HAdeviceForm += 'Master Rack/Console Loc.Code:  '+mfwloc+'\n'
    HAdeviceForm += 'Backup Rack/Console Loc.Code:  '+sfwloc+'\n'
    HAdeviceForm += devicetype.title()+' Network Unit: Infra 4.0, equipment racks: '+mfwloc.row+'-'+mfwloc.rack_noa+', '+sfwloc.row+'-'+sfwloc.rack_noa+'\n\n'
    HAdeviceForm += devicetype.title()+'s Front (Network '+frontdepth+')\n\n'
    HAdeviceForm += '  '+devicetype.title()+' Front-VRRP Interface:   '+str(frontnet[0][4])+'\n'
    HAdeviceForm += '  Master '+devicetype.title()+' Front Interface: '+str(frontnet[0][5])+'\n'
    HAdeviceForm += '  Backup '+devicetype.title()+' Front Interface: '+str(frontnet[0][6])+'\n\n'
    HAdeviceForm += '  Default Gateway:  '+str(frontnet[0][1])+'\n'
    HAdeviceForm += '  Front Network:    '+str(frontnet[0])+'\n'
    HAdeviceForm += '  Front Netmask:    '+str(frontnet[0].netmask)+'\n\n'
    HAdeviceForm += '  Ports on SLB Equipment side:       '+availPorts[0]+'\n'
    HAdeviceForm += '  SLB-Equipment side VLAN & VRRP ID: 1\n'
    HAdeviceForm += '  Master '+devicetype.title()+' Connection To: '+mfwloc.findsw()+'\n'
    HAdeviceForm += '  Backup '+devicetype.title()+' Connection To: '+sfwloc.findsw()+'\n'
    HAdeviceForm += '  '+devicetype.title()+' Connection Port:      '+sfwloc.findfrport()+' (flowctrl recv on)\n'
    HAdeviceForm += '  SwitchPort Speed/Duplex set to:    a-1000M/a-Full\n'
    HAdeviceForm += '  INFRA4.0 VLAN (Num/Label):         '+str(frontVlan)+'/'+mfwloc.room+'r'+str("%02d" % int(mfwloc.row))+'-'+alloccode+'-'+frontdepth+'\n\n'
    HAdeviceForm += devicetype.title()+'s Backs:\n\n'
    HAdeviceForm += '**'+backName+' (Network '+backdepth+')\n\n'
    HAdeviceForm += '  '+devicetype.title()+' Back-VRRP Interface:   '+str(backnets[0][1])+' (gateway for ???)\n'
    HAdeviceForm += '  Master '+devicetype.title()+' Back Interface: '+str(backnets[0][2])+'\n'
    HAdeviceForm += '  Backup '+devicetype.title()+' Back Interface: '+str(backnets[0][3])+'\n\n'
    HAdeviceForm += '  Back Network:      '+str(backnets[0])+'\n'
    HAdeviceForm += '  Back Netmask:      '+str(backnets[0].netmask)+'\n\n'
    ####################### ADD LOOP FOR ADDITIONAL ALIASES #######################
    if len(backnets) > 1:
        for backnet in backnets[1:]:
            HAdeviceForm += ' *Add\'tl Alias for '+backName+':\n\n'
            HAdeviceForm += '  '+devicetype.title()+' Back-VRRP Interface:   '+str(backnet[1])+' (gateway for ???)\n'
            HAdeviceForm += '  Master '+devicetype.title()+' Back Interface: '+str(backnet[2])+'\n'
            HAdeviceForm += '  Backup '+devicetype.title()+' Back Interface: '+str(backnet[3])+'\n\n'
            HAdeviceForm += '  Back Network:      '+str(backnet)+'\n'
            HAdeviceForm += '  Back Netmask:      '+str(backnet.netmask)+'\n\n'
    ###############################################################################
    HAdeviceForm += '  Master SLB device back-alias-IP:   ?\n'
    HAdeviceForm += '  Backup SLB device back-alias-IP:   ?\n'
    HAdeviceForm += '  Netmask on SLB device-alias:       ?\n\n'
    HAdeviceForm += '  Ports on SLB Equipment side:       '+availPorts[1]+'\n'
    HAdeviceForm += '  SLB-Equipment side VLAN & VRRP ID: 102\n'
    HAdeviceForm += '  Master '+devicetype.title()+' Connection To: '+mfwloc.findsw()+'\n'
    HAdeviceForm += '  Backup '+devicetype.title()+' Connection To: '+sfwloc.findsw()+'\n'
    HAdeviceForm += '  '+devicetype.title()+' Connection Port:      '+sfwloc.findbkport()+' (flowctrl recv on)\n'
    HAdeviceForm += '  SwitchPort Speed/Duplex set to:    a-1000M/a-Full\n'
    HAdeviceForm += '  INFRA4.0 VLAN (Num/Label):         '+str(backVlan)+'/'+mfwloc.room+'r'+str("%02d" % int(mfwloc.row))+'-'+alloccode+'-'+backdepth+'\n\n'
    HAdeviceForm += ' Range of Load-balanced sites:\n\n'
    HAdeviceForm += '  1: \n'
    HAdeviceForm += '  2: \n'
    HAdeviceForm += '  3: \n\n'
    HAdeviceForm += ' RESERVED: \n\n'
    auxIII = 2
    for segment in Segments[2:]:
        HAdeviceForm += '**'+segment+' (Network '+Depths[auxIII]+')\n\n'
        HAdeviceForm += '  '+devicetype.title()+' Back-VRRP Interface:   '+str(SubnetLists[auxIII][0][1])+' (gateway for ???)\n'
        HAdeviceForm += '  Master '+devicetype.title()+' Back Interface: '+str(SubnetLists[auxIII][0][2])+'\n'
        HAdeviceForm += '  Backup '+devicetype.title()+' Back Interface: '+str(SubnetLists[auxIII][0][3])+'\n\n'
        HAdeviceForm += '  Back Network:      '+str(SubnetLists[auxIII][0])+'\n'
        HAdeviceForm += '  Back Netmask:      '+str(SubnetLists[auxIII][0].netmask)+'\n\n'
        ####################### ADD LOOP FOR ADDITIONAL ALIASES #######################
        if len(SubnetLists[auxIII]) > 1:
            for aliasnet in SubnetLists[auxIII][1:]:
                HAdeviceForm += ' *Add\'tl Alias for '+Segments[auxIII]+':\n\n'
                HAdeviceForm += '  '+devicetype.title()+' Back-VRRP Interface:   '+str(aliasnet[1])+' (gateway for ???)\n'
                HAdeviceForm += '  Master '+devicetype.title()+' Back Interface: '+str(aliasnet[2])+'\n'
                HAdeviceForm += '  Backup '+devicetype.title()+' Back Interface: '+str(aliasnet[3])+'\n\n'
                HAdeviceForm += '  Back Network:      '+str(aliasnet)+'\n'
                HAdeviceForm += '  Back Netmask:      '+str(aliasnet.netmask)+'\n\n'
        ###############################################################################
        HAdeviceForm += '  Master SLB device back-alias-IP:   ?\n'
        HAdeviceForm += '  Backup SLB device back-alias-IP:   ?\n'
        HAdeviceForm += '  Netmask on SLB device-alias:       ?\n\n'
        HAdeviceForm += '  Ports on SLB Equipment side:       '+availPorts[auxIII]+'\n'
        HAdeviceForm += '  SLB-Equipment side VLAN & VRRP ID: '+str(101+auxIII)+'\n'
        HAdeviceForm += '  Master '+devicetype.title()+' Connection To: '+mfwloc.findsw()+'\n'
        HAdeviceForm += '  Backup '+devicetype.title()+' Connection To: '+sfwloc.findsw()+'\n'
        HAdeviceForm += '  '+devicetype.title()+' Connection Port:      gi'+sfwloc.findmod()+'/'+str(Ports[auxIII])+' (flowctrl recv on)\n'
        HAdeviceForm += '  SwitchPorts Speed/Duplex set to:   a-1000M/a-Full\n'
        HAdeviceForm += '  INFRA4.0 VLAN (Num/Label):         '+str(Vlans[auxIII])+'/'+mfwloc.room+'r'+str("%02d" % int(mfwloc.row))+'-'+alloccode+'-'+Depths[auxIII]+'\n\n'
        HAdeviceForm += ' Range of Load-balanced sites:\n\n'
        HAdeviceForm += '  1: \n'
        HAdeviceForm += '  2: \n'
        HAdeviceForm += '  3: \n\n'
        HAdeviceForm += ' RESERVED: \n\n'
        auxIII += 1
    HAdeviceForm += '**State sync is '+syncInt+'\n\n'
    print(HAdeviceForm)
    if ips != 'none':
        input('Hit Enter to view the IPS allocation form')
        print()
        # [IF APPLICABLE] IPS allocation form
        ipsform = 'IPS NETWORK INFORMATION:\n'
        ipsform += '--------------------------\n\n'
        ipsform += 'IPS ID: '+ips+'\n'
        ipsform += 'IPS Rack Location: '+ipsloc+'\n\n'
        ipsform += 'IPS Management#1 port\n\n'
        ipsform += '      connection to: '+ipsloc.findsw()+'\n'
        ipsform += '               port: '+ipsloc.findbkport()+' (Green cable)\n'
        ipsform += '          speed/dup: 100M/Full\n'
        ipsform += '   VLAN (Num/Label): '+str(ipsmgtVlan)+'/'+ipsloc.room+'r'+str("%02d" % int(ipsloc.row))+'-'+alloccode+'-'+ipsmgtDepth+'\n\n'
        if Sniff[1] == 'y':
            ipsform += 'IPS inline port 1A\n\n'
            ipsform += '      connection to: '+mfw+'\n'
            ipsform += '               port: '+availPorts[1]+'\n'
            ipsform += '          speed/dup: '+speed+'M/Full\n'
            ipsform += '         cable type: XOVER\n\n'
            ipsform += 'IPS inline port 1B\n\n'
            ipsform += '      connection to: '+mfwloc.findsw()+'\n'
            ipsform += '               port: '+mfwloc.findbkport()+' ('+mfwloc+' green)\n'
            ipsform += '          speed/dup: '+speed+'M/Full\n'
            ipsform += '         cable type: straight-thru \n\n'
            auxIV = 2
            for sniff in Sniff[2:]:
                if sniff == 'y':
                    ipsform += 'IPS inline port 2C\n\n'
                    ipsform += '      connection to: '+mfw+'\n'
                    ipsform += '               port: '+availPorts[auxIV]+'\n'
                    ipsform += '          speed/dup: '+speed+'M/Full\n'
                    ipsform += '         cable type: XOVER\n\n'
                    ipsform += 'IPS inline port 2D\n\n'
                    ipsform += '      connection to: '+mfwloc.findsw()+'\n'
                    ipsform += '               port: gi'+mfwloc.findmod()+'/'+str(Ports[auxIV])+'\n'
                    ipsform += '          speed/dup: '+speed+'M/Full\n'
                    ipsform += '         cable type: straight-thru\n\n'
                    auxIV += 1
                else:
                    auxIV += 1
        else:
            auxV = 0
            auxVI = 2
            for sniff in Sniff[2:]:
                if sniff == 'y':
                    ipsform += 'IPS inline port '+('1A' if auxV == 0 else '2C')+'\n\n'
                    ipsform += '      connection to: '+mfw+'\n'
                    ipsform += '               port: '+availPorts[auxVI]+'\n'
                    ipsform += '          speed/dup: '+speed+'M/Full\n'
                    ipsform += '         cable type: XOVER\n\n'
                    ipsform += 'IPS inline port '+('1B' if auxV == 0 else '2D')+'\n\n'
                    ipsform += '      connection to: '+mfwloc.findsw()+'\n'
                    ipsform += '               port: gi'+mfwloc.findmod()+'/'+str(Ports[auxVI])+'\n'
                    ipsform += '          speed/dup: '+speed+'M/Full\n'
                    ipsform += '         cable type: straight-thru\n\n'
                    auxV += 1
                    auxVI += 1
                else:
                    auxVI += 1
        ipsform += 'IPS Management\n\n'
        ipsform += '       IP: '+str(ipsmgtIPaddr.ip)+'\n'
        ipsform += '  Netmask: '+str(ipsmgtIPaddr.netmask)+'\n'
        ipsform += '  Gateway: '+str(ipsmgtIPaddr.network[1])+'\n'
        ipsform += 'Broadcast: '+str(ipsmgtIPaddr.network[-1])+'\n'
        print(ipsform)