def test_encode_decode():
anc = AncillaryData()
anc.FirstBinRange = 1.0 # Blank. Depth to the first bin in meters.
anc.BinSize = 3.0 # Size of a bin in meters.
anc.FirstPingTime = 1.2 # First Ping Time in seconds.
anc.LastPingTime = 2.3 # Last Ping Time in seconds. (If averaging pings, this will be the last ping)
anc.Heading = 23.5 # Heading in degrees.
anc.Pitch = 13.6 # Pitch in degrees.
anc.Roll = 11.25 # Roll in degrees.
anc.WaterTemp = 25.3 # Water Temperature in fahrenheit
anc.SystemTemp = 54.6 # System Temperature in fahrenheit
anc.Salinity = 35.0 # Water Salinity set by the user in PPT
anc.Pressure = 23.78 # Pressure from pressure sensor in Pascals
anc.TransducerDepth = 45.69 # Transducer Depth, used by Pressure sensor in meters
anc.SpeedOfSound = 1400.23 # Speed of Sound in m/s.
anc.RawMagFieldStrength = 3.0 # Raw magnetic field strength
anc.RawMagFieldStrength2 = 4.0 # Raw magnetic field strength
anc.RawMagFieldStrength3 = 5.0 # Raw magnetic field strength
anc.PitchGravityVector = 4.0 # Pitch Gravity Vector
anc.RollGravityVector = 5.0 # Roll Gravity Vector
anc.VerticalGravityVector = 6.0 # Vertical Gravity Vector
# Populate data
result = anc.encode() # Encode
anc1 = AncillaryData()
anc1.decode(bytearray(result)) # Decode
assert anc.FirstBinRange == pytest.approx(anc1.FirstBinRange, 0.1)
assert anc.BinSize == pytest.approx(anc1.BinSize, 0.1)
assert anc.FirstPingTime == pytest.approx(anc1.FirstPingTime, 0.1)
assert anc.LastPingTime == pytest.approx(anc1.LastPingTime, 0.1)
assert anc.Heading == pytest.approx(anc1.Heading, 0.1)
assert anc.Pitch == pytest.approx(anc1.Pitch, 0.1)
assert anc.Roll == pytest.approx(anc1.Roll, 0.1)
assert anc.WaterTemp == pytest.approx(anc1.WaterTemp, 0.1)
assert anc.SystemTemp == pytest.approx(anc1.SystemTemp, 0.1)
assert anc.Salinity == pytest.approx(anc1.Salinity, 0.1)
assert anc.Pressure == pytest.approx(anc1.Pressure, 0.1)
assert anc.TransducerDepth == pytest.approx(anc1.TransducerDepth, 0.1)
assert anc.SpeedOfSound == pytest.approx(anc1.SpeedOfSound, 0.1)
assert anc.RawMagFieldStrength == pytest.approx(anc1.RawMagFieldStrength,
0.1)
assert anc.RawMagFieldStrength2 == pytest.approx(anc1.RawMagFieldStrength2,
0.1)
assert anc.RawMagFieldStrength3 == pytest.approx(anc1.RawMagFieldStrength3,
0.1)
assert anc.PitchGravityVector == pytest.approx(anc1.PitchGravityVector,
0.1)
assert anc.RollGravityVector == pytest.approx(anc1.RollGravityVector, 0.1)
assert anc.VerticalGravityVector == pytest.approx(
anc1.VerticalGravityVector, 0.1)
def test_encode_decode():
num_bins = 33
num_beams = 4
ens = Ensemble()
ens_ds = EnsembleData()
ens_ds.EnsembleNumber = 2668
ens_ds.NumBins = 33
ens_ds.NumBeams = 4
ens_ds.DesiredPingCount = 45
ens_ds.ActualPingCount = 46
ens_ds.SerialNumber = "01H00000000000000000000000999999"
ens_ds.SysFirmwareMajor = 2
ens_ds.SysFirmwareMinor = 11
ens_ds.SysFirmwareRevision = 5
ens_ds.SysFirmwareSubsystemCode = "A"
ens_ds.SubsystemConfig = 3
ens_ds.Status = 9
ens_ds.Year = 2019
ens_ds.Month = 3
ens_ds.Day = 9
ens_ds.Hour = 12
ens_ds.Minute = 23
ens_ds.Second = 24
ens_ds.HSec = 33
anc = AncillaryData()
anc.FirstBinRange = 1.0 # Blank. Depth to the first bin in meters.
anc.BinSize = 3.0 # Size of a bin in meters.
anc.FirstPingTime = 1.2 # First Ping Time in seconds.
anc.LastPingTime = 2.3 # Last Ping Time in seconds. (If averaging pings, this will be the last ping)
anc.Heading = 23.5 # Heading in degrees.
anc.Pitch = 13.6 # Pitch in degrees.
anc.Roll = 11.25 # Roll in degrees.
anc.WaterTemp = 25.3 # Water Temperature in fahrenheit
anc.SystemTemp = 54.6 # System Temperature in fahrenheit
anc.Salinity = 35.0 # Water Salinity set by the user in PPT
anc.Pressure = 23.78 # Pressure from pressure sensor in Pascals
anc.TransducerDepth = 45.69 # Transducer Depth, used by Pressure sensor in meters
anc.SpeedOfSound = 1400.23 # Speed of Sound in m/s.
anc.RawMagFieldStrength = 3.0 # Raw magnetic field strength
anc.PitchGravityVector = 4.0 # Pitch Gravity Vector
anc.RollGravityVector = 5.0 # Roll Gravity Vector
anc.VerticalGravityVector = 6.0 # Vertical Gravity Vector
amp = Amplitude(num_bins, num_beams)
corr = Correlation(num_bins, num_beams)
beam_vel = BeamVelocity(num_bins, num_beams)
inst_vel = InstrumentVelocity(num_bins, num_beams)
earth_vel = EarthVelocity(num_bins, num_beams)
gb = GoodBeam(num_bins, num_beams)
ge = GoodEarth(num_bins, num_beams)
val = 1.0
for beam in range(amp.element_multiplier):
for bin_num in range(amp.num_elements):
amp.Amplitude[bin_num][beam] = val
corr.Correlation[bin_num][beam] = val
beam_vel.Velocities[bin_num][beam] = val
inst_vel.Velocities[bin_num][beam] = val
earth_vel.Velocities[bin_num][beam] = val
gb.GoodBeam[bin_num][beam] = 1 * int(beam)
ge.GoodEarth[bin_num][beam] = 1 * int(beam)
val += 1.1
bt = BottomTrack()
bt.FirstPingTime = 12.5
bt.LastPingTime = 12.8
bt.Heading = 152.36
bt.Pitch = 12.6
bt.Roll = 223.1
bt.WaterTemp = 15.23
bt.SystemTemp = 78.58
bt.Salinity = 35.0
bt.Pressure = 23.36
bt.TransducerDepth = 156.2
bt.SpeedOfSound = 1402.36
bt.Status = 9.0
bt.NumBeams = 4.0
bt.ActualPingCount = 23
bt.Range = [1.1, 2.2, 3.3, 4.4]
bt.SNR = [1.1, 2.2, 3.3, 4.4]
bt.Amplitude = [1.1, 2.2, 3.3, 4.4]
bt.Correlation = [1.1, 2.2, 3.3, 4.4]
bt.BeamVelocity = [1.1, 2.2, 3.3, 4.4]
bt.BeamGood = [1, 2, 3, 4]
bt.InstrumentVelocity = [1.1, 2.2, 3.3, 4.4]
bt.InstrumentGood = [1, 2, 3, 4]
bt.EarthVelocity = [1.1, 2.2, 3.3, 4.4]
bt.EarthGood = [1, 2, 3, 4]
bt.SNR_PulseCoherent = [1, 2, 3, 4]
bt.Amp_PulseCoherent = [1, 2, 3, 4]
bt.Vel_PulseCoherent = [1, 2, 3, 4]
bt.Noise_PulseCoherent = [1, 2, 3, 4]
bt.Corr_PulseCoherent = [1, 2, 3, 4]
rt = RangeTracking()
rt.NumBeams = 4.0
rt.Range = [1.1, 2.2, 3.3, 4.4]
rt.Pings = [1, 2, 3, 4]
rt.SNR = [1.1, 2.2, 3.3, 4.4]
rt.Amplitude = [1.1, 2.2, 3.3, 4.4]
rt.Correlation = [1.1, 2.2, 3.3, 4.4]
rt.BeamVelocity = [1.1, 2.2, 3.3, 4.4]
rt.InstrumentVelocity = [1.1, 2.2, 3.3, 4.4]
rt.EarthVelocity = [1.1, 2.2, 3.3, 4.4]
nmea = NmeaData()
nmea.add_nmea("$HEHDT,244.39,T*17\n")
nmea.add_nmea(
"$GPGGA,195949.00,3254.8103248,N,11655.5779629,W,2,08,1.1,222.174,M,-32.602,M,6.0,0138*75\n"
)
nmea.add_nmea("$GPVTG,306.20,T,294.73,M,0.13,N,0.24,K,D*2E\n")
nmea.add_nmea("$HEHDT,244.36,T*18\n")
ss = SystemSetup()
ss.BtSamplesPerSecond = 1.0
ss.BtSystemFreqHz = 3.0
ss.BtCPCE = 1.2
ss.BtNCE = 2.3
ss.BtRepeatN = 23.5
ss.WpSamplesPerSecond = 13.6
ss.WpSystemFreqHz = 11.25
ss.WpCPCE = 25.3
ss.WpNCE = 54.6
ss.WpRepeatN = 35.0
ss.WpLagSamples = 23.78
ss.Voltage = 45.69
ss.XmtVoltage = 1400.23
ss.BtBroadband = 3.0
ss.BtLagLength = 4.0
ss.BtNarrowband = 5.0
ss.BtBeamMux = 6.0
ss.WpBroadband = 6.0
ss.WpLagLength = 6.0
ss.WpTransmitBandwidth = 6.0
ss.WpReceiveBandwidth = 6.0
ens.AddAmplitude(amp)
ens.AddCorrelation(corr)
ens.AddBeamVelocity(beam_vel)
ens.AddInstrumentVelocity(inst_vel)
ens.AddEarthVelocity(earth_vel)
ens.AddGoodBeam(gb)
ens.AddGoodEarth(ge)
ens.AddAncillaryData(anc)
ens.AddEnsembleData(ens_ds)
ens.AddBottomTrack(bt)
ens.AddRangeTracking(rt)
ens.AddSystemSetup(ss)
ens.AddNmeaData(nmea)
# Encode the ensemble to binar
binary_ens = ens.encode()
# Use the codec to decode the data
ens1 = BinaryCodec.decode_data_sets(binary_ens[:-4]) # Remove the checksum
assert ens.EnsembleData.EnsembleNumber == ens1.EnsembleData.EnsembleNumber
assert ens.EnsembleData.NumBins == ens1.EnsembleData.NumBins
assert ens.EnsembleData.NumBeams == ens1.EnsembleData.NumBeams
assert ens.EnsembleData.DesiredPingCount == ens1.EnsembleData.DesiredPingCount
assert ens.EnsembleData.ActualPingCount == ens1.EnsembleData.ActualPingCount
assert ens.EnsembleData.SerialNumber == ens1.EnsembleData.SerialNumber
assert ens.EnsembleData.SysFirmwareMajor == ens1.EnsembleData.SysFirmwareMajor
assert ens.EnsembleData.SysFirmwareMinor == ens1.EnsembleData.SysFirmwareMinor
assert ens.EnsembleData.SysFirmwareRevision == ens1.EnsembleData.SysFirmwareRevision
assert ens.EnsembleData.SysFirmwareSubsystemCode == ens1.EnsembleData.SysFirmwareSubsystemCode
assert ens.EnsembleData.SubsystemConfig == ens1.EnsembleData.SubsystemConfig
assert ens.EnsembleData.Status == ens1.EnsembleData.Status
assert ens.EnsembleData.Year == ens1.EnsembleData.Year
assert ens.EnsembleData.Month == ens1.EnsembleData.Month
assert ens.EnsembleData.Day == ens1.EnsembleData.Day
assert ens.EnsembleData.Hour == ens1.EnsembleData.Hour
assert ens.EnsembleData.Minute == ens1.EnsembleData.Minute
assert ens.EnsembleData.Second == ens1.EnsembleData.Second
assert ens.EnsembleData.HSec == ens1.EnsembleData.HSec
assert anc.FirstBinRange == pytest.approx(ens1.AncillaryData.FirstBinRange,
0.1)
assert anc.BinSize == pytest.approx(ens1.AncillaryData.BinSize, 0.1)
assert anc.FirstPingTime == pytest.approx(ens1.AncillaryData.FirstPingTime,
0.1)
assert anc.LastPingTime == pytest.approx(ens1.AncillaryData.LastPingTime,
0.1)
assert anc.Heading == pytest.approx(ens1.AncillaryData.Heading, 0.1)
assert anc.Pitch == pytest.approx(ens1.AncillaryData.Pitch, 0.1)
assert anc.Roll == pytest.approx(ens1.AncillaryData.Roll, 0.1)
assert anc.WaterTemp == pytest.approx(ens1.AncillaryData.WaterTemp, 0.1)
assert anc.SystemTemp == pytest.approx(ens1.AncillaryData.SystemTemp, 0.1)
assert anc.Salinity == pytest.approx(ens1.AncillaryData.Salinity, 0.1)
assert anc.Pressure == pytest.approx(ens1.AncillaryData.Pressure, 0.1)
assert anc.TransducerDepth == pytest.approx(
ens1.AncillaryData.TransducerDepth, 0.1)
assert anc.SpeedOfSound == pytest.approx(ens1.AncillaryData.SpeedOfSound,
0.1)
assert anc.RawMagFieldStrength == pytest.approx(
ens1.AncillaryData.RawMagFieldStrength, 0.1)
assert anc.PitchGravityVector == pytest.approx(
ens1.AncillaryData.PitchGravityVector, 0.1)
assert anc.RollGravityVector == pytest.approx(
ens1.AncillaryData.RollGravityVector, 0.1)
assert anc.VerticalGravityVector == pytest.approx(
ens1.AncillaryData.VerticalGravityVector, 0.1)
for beam in range(amp.element_multiplier):
for bin_num in range(amp.num_elements):
assert amp.Amplitude[bin_num][beam] == pytest.approx(
ens1.Amplitude.Amplitude[bin_num][beam], 0.1)
for beam in range(corr.element_multiplier):
for bin_num in range(corr.num_elements):
assert corr.Correlation[bin_num][beam] == pytest.approx(
ens1.Correlation.Correlation[bin_num][beam], 0.1)
for beam in range(beam_vel.element_multiplier):
for bin_num in range(beam_vel.num_elements):
assert beam_vel.Velocities[bin_num][beam] == pytest.approx(
ens1.Wt.Velocities[bin_num][beam], 0.1)
for beam in range(beam_vel.element_multiplier):
for bin_num in range(beam_vel.num_elements):
assert inst_vel.Velocities[bin_num][beam] == pytest.approx(
ens1.InstrumentVelocity.Velocities[bin_num][beam], 0.1)
for beam in range(beam_vel.element_multiplier):
for bin_num in range(beam_vel.num_elements):
assert earth_vel.Velocities[bin_num][beam] == pytest.approx(
ens1.EarthVelocity.Velocities[bin_num][beam], 0.1)
#for beam in range(gb.element_multiplier):
# for bin_num in range(gb.num_elements):
# assert gb.GoodBeam[bin_num][beam] == pytest.approx(ens1.GoodBeam.GoodBeam[bin_num][beam], 0.1)
for beam in range(ge.element_multiplier):
for bin_num in range(ge.num_elements):
assert ge.GoodEarth[bin_num][beam] == pytest.approx(
ens1.GoodEarth.GoodEarth[bin_num][beam], 0.1)
assert bt.FirstPingTime == pytest.approx(ens1.BottomTrack.FirstPingTime)
assert bt.LastPingTime == pytest.approx(ens1.BottomTrack.LastPingTime)
assert bt.Heading == pytest.approx(ens1.BottomTrack.Heading)
assert bt.Pitch == pytest.approx(ens1.BottomTrack.Pitch)
assert bt.Roll == pytest.approx(ens1.BottomTrack.Roll)
assert bt.WaterTemp == pytest.approx(ens1.BottomTrack.WaterTemp)
assert bt.SystemTemp == pytest.approx(ens1.BottomTrack.SystemTemp)
assert bt.Salinity == pytest.approx(ens1.BottomTrack.Salinity)
assert bt.Pressure == pytest.approx(ens1.BottomTrack.Pressure)
assert bt.TransducerDepth == pytest.approx(
ens1.BottomTrack.TransducerDepth)
assert bt.SpeedOfSound == pytest.approx(ens1.BottomTrack.SpeedOfSound)
assert bt.Status == pytest.approx(ens1.BottomTrack.Status)
assert bt.NumBeams == pytest.approx(ens1.BottomTrack.NumBeams)
assert bt.ActualPingCount == pytest.approx(
ens1.BottomTrack.ActualPingCount)
assert bt.Range == pytest.approx(ens1.BottomTrack.Range)
assert bt.SNR == pytest.approx(ens1.BottomTrack.SNR)
assert bt.Amplitude == pytest.approx(ens1.BottomTrack.Amplitude)
assert bt.Correlation == pytest.approx(ens1.BottomTrack.Correlation)
assert bt.BeamVelocity == pytest.approx(ens1.BottomTrack.Wt)
assert bt.BeamGood == pytest.approx(ens1.BottomTrack.BeamGood, 0.1)
assert bt.InstrumentVelocity == pytest.approx(
ens1.BottomTrack.InstrumentVelocity)
assert bt.InstrumentGood == pytest.approx(ens1.BottomTrack.InstrumentGood,
0.1)
assert bt.EarthVelocity == pytest.approx(ens1.BottomTrack.EarthVelocity)
assert bt.EarthGood == pytest.approx(ens1.BottomTrack.EarthGood, 0.1)
assert bt.SNR_PulseCoherent == pytest.approx(
ens1.BottomTrack.SNR_PulseCoherent, 0.1)
assert bt.Amp_PulseCoherent == pytest.approx(
ens1.BottomTrack.Amp_PulseCoherent, 0.1)
assert bt.Vel_PulseCoherent == pytest.approx(
ens1.BottomTrack.Vel_PulseCoherent, 0.1)
assert bt.Noise_PulseCoherent == pytest.approx(
ens1.BottomTrack.Noise_PulseCoherent, 0.1)
assert bt.Corr_PulseCoherent == pytest.approx(
ens1.BottomTrack.Corr_PulseCoherent, 0.1)
assert rt.NumBeams == ens1.RangeTracking.NumBeams
assert rt.Range == pytest.approx(ens1.RangeTracking.Range)
assert rt.SNR == pytest.approx(ens1.RangeTracking.SNR)
assert rt.Amplitude == pytest.approx(ens1.RangeTracking.Amplitude)
assert rt.Correlation == pytest.approx(ens1.RangeTracking.Correlation)
assert rt.BeamVelocity == pytest.approx(ens1.RangeTracking.Wt)
assert rt.InstrumentVelocity == pytest.approx(
ens1.RangeTracking.InstrumentVelocity)
assert rt.EarthVelocity == pytest.approx(ens1.RangeTracking.EarthVelocity)
assert nmea.nmea_sentences == ens1.NmeaData.nmea_sentences
assert ss.BtSamplesPerSecond == pytest.approx(
ens1.SystemSetup.BtSamplesPerSecond, 0.1)
assert ss.BtSystemFreqHz == pytest.approx(ens1.SystemSetup.BtSystemFreqHz,
0.1)
assert ss.BtCPCE == pytest.approx(ens1.SystemSetup.BtCPCE, 0.1)
assert ss.BtNCE == pytest.approx(ens1.SystemSetup.BtNCE, 0.1)
assert ss.BtRepeatN == pytest.approx(ens1.SystemSetup.BtRepeatN, 0.1)
assert ss.WpSamplesPerSecond == pytest.approx(
ens1.SystemSetup.WpSamplesPerSecond, 0.1)
assert ss.WpSystemFreqHz == pytest.approx(ens1.SystemSetup.WpSystemFreqHz,
0.1)
assert ss.WpCPCE == pytest.approx(ens1.SystemSetup.WpCPCE, 0.1)
assert ss.WpNCE == pytest.approx(ens1.SystemSetup.WpNCE, 0.1)
assert ss.WpRepeatN == pytest.approx(ens1.SystemSetup.WpRepeatN, 0.1)
assert ss.WpLagSamples == pytest.approx(ens1.SystemSetup.WpLagSamples, 0.1)
assert ss.Voltage == pytest.approx(ens1.SystemSetup.Voltage, 0.1)
assert ss.XmtVoltage == pytest.approx(ens1.SystemSetup.XmtVoltage, 0.1)
assert ss.BtBroadband == pytest.approx(ens1.SystemSetup.BtBroadband, 0.1)
assert ss.BtLagLength == pytest.approx(ens1.SystemSetup.BtLagLength, 0.1)
assert ss.BtNarrowband == pytest.approx(ens1.SystemSetup.BtNarrowband, 0.1)
assert ss.BtBeamMux == pytest.approx(ens1.SystemSetup.BtBeamMux, 0.1)
assert ss.WpBroadband == pytest.approx(ens1.SystemSetup.WpBroadband, 0.1)
assert ss.WpLagLength == pytest.approx(ens1.SystemSetup.WpLagLength, 0.1)
assert ss.WpTransmitBandwidth == pytest.approx(
ens1.SystemSetup.WpTransmitBandwidth, 0.1)
assert ss.WpReceiveBandwidth == pytest.approx(
ens1.SystemSetup.WpReceiveBandwidth, 0.1)
def test_ancillary():
anc = AncillaryData()
anc.FirstBinRange = 1.0 # Blank. Depth to the first bin in meters.
anc.BinSize = 3.0 # Size of a bin in meters.
anc.FirstPingTime = 1.2 # First Ping Time in seconds.
anc.LastPingTime = 2.3 # Last Ping Time in seconds. (If averaging pings, this will be the last ping)
anc.Heading = 23.5 # Heading in degrees.
anc.Pitch = 13.6 # Pitch in degrees.
anc.Roll = 11.25 # Roll in degrees.
anc.WaterTemp = 25.3 # Water Temperature in fahrenheit
anc.SystemTemp = 54.6 # System Temperature in fahrenheit
anc.Salinity = 35.0 # Water Salinity set by the user in PPT
anc.Pressure = 23.78 # Pressure from pressure sensor in Pascals
anc.TransducerDepth = 45.69 # Transducer Depth, used by Pressure sensor in meters
anc.SpeedOfSound = 1400.23 # Speed of Sound in m/s.
anc.RawMagFieldStrength = 3.0 # Raw magnetic field strength
anc.RawMagFieldStrength2 = 4.0 # Raw magnetic field strength
anc.RawMagFieldStrength3 = 5.0 # Raw magnetic field strength
anc.PitchGravityVector = 4.0 # Pitch Gravity Vector
anc.RollGravityVector = 5.0 # Roll Gravity Vector
anc.VerticalGravityVector = 6.0 # Vertical Gravity Vector
# Populate data
result = anc.encode()
# Value type
assert 0xA == result[0]
assert 0x0 == result[1]
assert 0x0 == result[2]
assert 0x0 == result[3]
# Num Elements
assert 0x13 == result[4]
assert 0x0 == result[5]
assert 0x0 == result[6]
assert 0x0 == result[7]
# Element Multiplier
assert 0x1 == result[8]
assert 0x0 == result[9]
assert 0x0 == result[10]
assert 0x0 == result[11]
# Imag
assert 0x0 == result[12]
assert 0x0 == result[13]
assert 0x0 == result[14]
assert 0x0 == result[15]
# Name Length
assert 0x8 == result[16]
assert 0x0 == result[17]
assert 0x0 == result[18]
assert 0x0 == result[19]
# Name
assert ord('E') == result[20]
assert ord('0') == result[21]
assert ord('0') == result[22]
assert ord('0') == result[23]
assert ord('0') == result[24]
assert ord('0') == result[25]
assert ord('9') == result[26]
assert ord('\0') == result[27]
# Length
assert len(result) == 28 + (
(anc.element_multiplier * anc.num_elements) * Ensemble.BytesInFloat)
# Data
# First Bin Range
assert Ensemble.float_to_bytes(1.0)[0] == result[28]
assert Ensemble.float_to_bytes(1.0)[1] == result[29]
assert Ensemble.float_to_bytes(1.0)[2] == result[30]
assert Ensemble.float_to_bytes(1.0)[3] == result[31]
# Bin SIze
assert Ensemble.float_to_bytes(3.0)[0] == result[32]
assert Ensemble.float_to_bytes(3.0)[1] == result[33]
assert Ensemble.float_to_bytes(3.0)[2] == result[34]
assert Ensemble.float_to_bytes(3.0)[3] == result[35]
# First Ping TIme
assert Ensemble.float_to_bytes(1.2)[0] == result[36]
assert Ensemble.float_to_bytes(1.2)[1] == result[37]
assert Ensemble.float_to_bytes(1.2)[2] == result[38]
assert Ensemble.float_to_bytes(1.2)[3] == result[39]
# Last Ping TIme
assert Ensemble.float_to_bytes(2.3)[0] == result[40]
assert Ensemble.float_to_bytes(2.3)[1] == result[41]
assert Ensemble.float_to_bytes(2.3)[2] == result[42]
assert Ensemble.float_to_bytes(2.3)[3] == result[43]
# Heading
assert Ensemble.float_to_bytes(23.5)[0] == result[44]
assert Ensemble.float_to_bytes(23.5)[1] == result[45]
assert Ensemble.float_to_bytes(23.5)[2] == result[46]
assert Ensemble.float_to_bytes(23.5)[3] == result[47]
# Pitch
assert Ensemble.float_to_bytes(13.6)[0] == result[48]
assert Ensemble.float_to_bytes(13.6)[1] == result[49]
assert Ensemble.float_to_bytes(13.6)[2] == result[50]
assert Ensemble.float_to_bytes(13.6)[3] == result[51]
# Roll
assert Ensemble.float_to_bytes(11.25)[0] == result[52]
assert Ensemble.float_to_bytes(11.25)[1] == result[53]
assert Ensemble.float_to_bytes(11.25)[2] == result[54]
assert Ensemble.float_to_bytes(11.25)[3] == result[55]
# Water Temp
assert Ensemble.float_to_bytes(25.3)[0] == result[56]
assert Ensemble.float_to_bytes(25.3)[1] == result[57]
assert Ensemble.float_to_bytes(25.3)[2] == result[58]
assert Ensemble.float_to_bytes(25.3)[3] == result[59]
# System Temp
assert Ensemble.float_to_bytes(54.6)[0] == result[60]
assert Ensemble.float_to_bytes(54.6)[1] == result[61]
assert Ensemble.float_to_bytes(54.6)[2] == result[62]
assert Ensemble.float_to_bytes(54.6)[3] == result[63]
# Salinity
assert Ensemble.float_to_bytes(35.0)[0] == result[64]
assert Ensemble.float_to_bytes(35.0)[1] == result[65]
assert Ensemble.float_to_bytes(35.0)[2] == result[66]
assert Ensemble.float_to_bytes(35.0)[3] == result[67]
# Pressure
assert Ensemble.float_to_bytes(23.78)[0] == result[68]
assert Ensemble.float_to_bytes(23.78)[1] == result[69]
assert Ensemble.float_to_bytes(23.78)[2] == result[70]
assert Ensemble.float_to_bytes(23.78)[3] == result[71]
# Transducer Depth
assert Ensemble.float_to_bytes(45.69)[0] == result[72]
assert Ensemble.float_to_bytes(45.69)[1] == result[73]
assert Ensemble.float_to_bytes(45.69)[2] == result[74]
assert Ensemble.float_to_bytes(45.69)[3] == result[75]
# Speed of Sound
assert Ensemble.float_to_bytes(1400.23)[0] == result[76]
assert Ensemble.float_to_bytes(1400.23)[1] == result[77]
assert Ensemble.float_to_bytes(1400.23)[2] == result[78]
assert Ensemble.float_to_bytes(1400.23)[3] == result[79]
# Raw Mag
assert Ensemble.float_to_bytes(3.0)[0] == result[80]
assert Ensemble.float_to_bytes(3.0)[1] == result[81]
assert Ensemble.float_to_bytes(3.0)[2] == result[82]
assert Ensemble.float_to_bytes(3.0)[3] == result[83]
# Raw Mag 2
assert Ensemble.float_to_bytes(4.0)[0] == result[84]
assert Ensemble.float_to_bytes(4.0)[1] == result[85]
assert Ensemble.float_to_bytes(4.0)[2] == result[86]
assert Ensemble.float_to_bytes(4.0)[3] == result[87]
# Raw Mag 3
assert Ensemble.float_to_bytes(5.0)[0] == result[88]
assert Ensemble.float_to_bytes(5.0)[1] == result[89]
assert Ensemble.float_to_bytes(5.0)[2] == result[90]
assert Ensemble.float_to_bytes(5.0)[3] == result[91]
# Raw Pitch
assert Ensemble.float_to_bytes(4.0)[0] == result[92]
assert Ensemble.float_to_bytes(4.0)[1] == result[93]
assert Ensemble.float_to_bytes(4.0)[2] == result[94]
assert Ensemble.float_to_bytes(4.0)[3] == result[95]
# Raw Roll
assert Ensemble.float_to_bytes(5.0)[0] == result[96]
assert Ensemble.float_to_bytes(5.0)[1] == result[97]
assert Ensemble.float_to_bytes(5.0)[2] == result[98]
assert Ensemble.float_to_bytes(5.0)[3] == result[99]
# Raw Vert
assert Ensemble.float_to_bytes(6.0)[0] == result[100]
assert Ensemble.float_to_bytes(6.0)[1] == result[101]
assert Ensemble.float_to_bytes(6.0)[2] == result[102]
assert Ensemble.float_to_bytes(6.0)[3] == result[103]
def test_encode_csv():
anc = AncillaryData()
anc.FirstBinRange = 1.0 # Blank. Depth to the first bin in meters.
anc.BinSize = 3.0 # Size of a bin in meters.
anc.FirstPingTime = 1.2 # First Ping Time in seconds.
anc.LastPingTime = 2.3 # Last Ping Time in seconds. (If averaging pings, this will be the last ping)
anc.Heading = 23.5 # Heading in degrees.
anc.Pitch = 13.6 # Pitch in degrees.
anc.Roll = 11.25 # Roll in degrees.
anc.WaterTemp = 25.3 # Water Temperature in fahrenheit
anc.SystemTemp = 54.6 # System Temperature in fahrenheit
anc.Salinity = 35.0 # Water Salinity set by the user in PPT
anc.Pressure = 23.78 # Pressure from pressure sensor in Pascals
anc.TransducerDepth = 45.69 # Transducer Depth, used by Pressure sensor in meters
anc.SpeedOfSound = 1400.23 # Speed of Sound in m/s.
anc.RawMagFieldStrength = 3.0 # Raw magnetic field strength
anc.RawMagFieldStrength2 = 4.0 # Raw magnetic field strength
anc.RawMagFieldStrength3 = 5.0 # Raw magnetic field strength
anc.PitchGravityVector = 4.0 # Pitch Gravity Vector
anc.RollGravityVector = 5.0 # Roll Gravity Vector
anc.VerticalGravityVector = 6.0 # Vertical Gravity Vector
# Populate data
dt = datetime.datetime.now()
# Create CSV lines
result = anc.encode_csv(dt, 'A', 1)
# Check the csv data
for line in result:
if Ensemble.CSV_FIRST_PING_TIME in line:
assert bool(re.search(str(1.2), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_LAST_PING_TIME in line:
assert bool(re.search(str(2.3), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_HEADING in line:
assert bool(re.search(str(23.5), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_PITCH in line:
assert bool(re.search(str(13.6), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_ROLL in line:
assert bool(re.search(str(11.25), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_WATER_TEMP in line:
assert bool(re.search(str(25.3), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_SYS_TEMP in line:
assert bool(re.search(str(54.6), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_PRESSURE in line:
assert bool(re.search(str(23.78), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_XDCR_DEPTH in line:
assert bool(re.search(str(45.69), line))
assert bool(re.search(str(0), line))
if Ensemble.CSV_SOS in line:
assert bool(re.search(str(1400.23), line))
assert bool(re.search(str(0), line))
def test_write_binary():
num_bins = 33
num_beams = 4
ens = Ensemble()
ens_ds = EnsembleData()
ens_ds.EnsembleNumber = 2668
ens_ds.NumBins = 33
ens_ds.NumBeams = 4
ens_ds.DesiredPingCount = 45
ens_ds.ActualPingCount = 46
ens_ds.SerialNumber = "01H00000000000000000000000999999"
ens_ds.SysFirmwareMajor = 2
ens_ds.SysFirmwareMinor = 11
ens_ds.SysFirmwareRevision = 5
ens_ds.SysFirmwareSubsystemCode = "A"
ens_ds.SubsystemConfig = 3
ens_ds.Status = 9
ens_ds.Year = 2019
ens_ds.Month = 3
ens_ds.Day = 9
ens_ds.Hour = 12
ens_ds.Minute = 23
ens_ds.Second = 24
ens_ds.HSec = 33
anc = AncillaryData()
anc.FirstBinRange = 1.0 # Blank. Depth to the first bin in meters.
anc.BinSize = 3.0 # Size of a bin in meters.
anc.FirstPingTime = 1.2 # First Ping Time in seconds.
anc.LastPingTime = 2.3 # Last Ping Time in seconds. (If averaging pings, this will be the last ping)
anc.Heading = 23.5 # Heading in degrees.
anc.Pitch = 13.6 # Pitch in degrees.
anc.Roll = 11.25 # Roll in degrees.
anc.WaterTemp = 25.3 # Water Temperature in fahrenheit
anc.SystemTemp = 54.6 # System Temperature in fahrenheit
anc.Salinity = 35.0 # Water Salinity set by the user in PPT
anc.Pressure = 23.78 # Pressure from pressure sensor in Pascals
anc.TransducerDepth = 45.69 # Transducer Depth, used by Pressure sensor in meters
anc.SpeedOfSound = 1400.23 # Speed of Sound in m/s.
anc.RawMagFieldStrength = 3.0 # Raw magnetic field strength
anc.PitchGravityVector = 4.0 # Pitch Gravity Vector
anc.RollGravityVector = 5.0 # Roll Gravity Vector
anc.VerticalGravityVector = 6.0 # Vertical Gravity Vector
amp = Amplitude(num_bins, num_beams)
corr = Correlation(num_bins, num_beams)
beam_vel = BeamVelocity(num_bins, num_beams)
inst_vel = InstrumentVelocity(num_bins, num_beams)
earth_vel = EarthVelocity(num_bins, num_beams)
gb = GoodBeam(num_bins, num_beams)
ge = GoodEarth(num_bins, num_beams)
val = 1.0
for beam in range(amp.element_multiplier):
for bin_num in range(amp.num_elements):
amp.Amplitude[bin_num][beam] = val
corr.Correlation[bin_num][beam] = val
beam_vel.Velocities[bin_num][beam] = val
inst_vel.Velocities[bin_num][beam] = val
earth_vel.Velocities[bin_num][beam] = val
gb.GoodBeam[bin_num][beam] = 1 * int(beam)
ge.GoodEarth[bin_num][beam] = 1 * int(beam)
val += 1.1
bt = BottomTrack()
bt.FirstPingTime = 12.5
bt.LastPingTime = 12.8
bt.Heading = 152.36
bt.Pitch = 12.6
bt.Roll = 223.1
bt.WaterTemp = 15.23
bt.SystemTemp = 78.58
bt.Salinity = 35.0
bt.Pressure = 23.36
bt.TransducerDepth = 156.2
bt.SpeedOfSound = 1402.36
bt.Status = 9.0
bt.NumBeams = 4.0
bt.ActualPingCount = 23
bt.Range = [1.1, 2.2, 3.3, 4.4]
bt.SNR = [1.1, 2.2, 3.3, 4.4]
bt.Amplitude = [1.1, 2.2, 3.3, 4.4]
bt.Correlation = [1.1, 2.2, 3.3, 4.4]
bt.BeamVelocity = [1.1, 2.2, 3.3, 4.4]
bt.BeamGood = [1, 2, 3, 4]
bt.InstrumentVelocity = [1.1, 2.2, 3.3, 4.4]
bt.InstrumentGood = [1, 2, 3, 4]
bt.EarthVelocity = [1.1, 2.2, 3.3, 4.4]
bt.EarthGood = [1, 2, 3, 4]
bt.SNR_PulseCoherent = [1, 2, 3, 4]
bt.Amp_PulseCoherent = [1, 2, 3, 4]
bt.Vel_PulseCoherent = [1, 2, 3, 4]
bt.Noise_PulseCoherent = [1, 2, 3, 4]
bt.Corr_PulseCoherent = [1, 2, 3, 4]
rt = RangeTracking()
rt.NumBeams = 4.0
rt.Range = [1.1, 2.2, 3.3, 4.4]
rt.Pings = [1, 2, 3, 4]
rt.SNR = [1.1, 2.2, 3.3, 4.4]
rt.Amplitude = [1.1, 2.2, 3.3, 4.4]
rt.Correlation = [1.1, 2.2, 3.3, 4.4]
rt.BeamVelocity = [1.1, 2.2, 3.3, 4.4]
rt.InstrumentVelocity = [1.1, 2.2, 3.3, 4.4]
rt.EarthVelocity = [1.1, 2.2, 3.3, 4.4]
nmea = NmeaData()
nmea.add_nmea("$HEHDT,244.39,T*17\n")
nmea.add_nmea(
"$GPGGA,195949.00,3254.8103248,N,11655.5779629,W,2,08,1.1,222.174,M,-32.602,M,6.0,0138*75\n"
)
nmea.add_nmea("$GPVTG,306.20,T,294.73,M,0.13,N,0.24,K,D*2E\n")
nmea.add_nmea("$HEHDT,244.36,T*18\n")
ss = SystemSetup()
ss.BtSamplesPerSecond = 1.0
ss.BtSystemFreqHz = 3.0
ss.BtCPCE = 1.2
ss.BtNCE = 2.3
ss.BtRepeatN = 23.5
ss.WpSamplesPerSecond = 13.6
ss.WpSystemFreqHz = 11.25
ss.WpCPCE = 25.3
ss.WpNCE = 54.6
ss.WpRepeatN = 35.0
ss.WpLagSamples = 23.78
ss.Voltage = 45.69
ss.XmtVoltage = 1400.23
ss.BtBroadband = 3.0
ss.BtLagLength = 4.0
ss.BtNarrowband = 5.0
ss.BtBeamMux = 6.0
ss.WpBroadband = 6.0
ss.WpLagLength = 6.0
ss.WpTransmitBandwidth = 6.0
ss.WpReceiveBandwidth = 6.0
ens.AddAmplitude(amp)
ens.AddCorrelation(corr)
ens.AddBeamVelocity(beam_vel)
ens.AddInstrumentVelocity(inst_vel)
ens.AddEarthVelocity(earth_vel)
ens.AddGoodBeam(gb)
ens.AddGoodEarth(ge)
ens.AddAncillaryData(anc)
ens.AddEnsembleData(ens_ds)
ens.AddBottomTrack(bt)
ens.AddRangeTracking(rt)
ens.AddSystemSetup(ss)
ens.AddNmeaData(nmea)
rti_writer = RtiBinaryWriter("C:\RTI_capture")
for ens_count in range(0, 100):
bin_data = ens.encode()
rti_writer.write(bin_data)
ens.EnsembleData.EnsembleNumber += 1
rti_writer.close()