def test_issue581(self):
"""Test issue #581 in github - Humanize can produce IndexError : list
index out of range
"""
# See https://github.com/AIFDR/inasafe/issues/581
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_small_jakarta_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page().currentFrame().toPlainText()
myMessage = 'Result not as expected: %s' % myResult
assert 'IndexError' not in myResult, myMessage
assert 'It appears that no People are affected by A flood in ' \
'Jakarta like in 2007. You may want to consider:' in myResult
def test_runCategorizedHazardBuildingImpact(self):
"""Flood function runs in GUI with Flood in Jakarta hazard data
Uses DKI buildings exposure data."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Essential buildings',
function='Be affected',
function_id='Categorised Hazard Building Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
myMessage = 'Result not as expected: %s' % myResult
# This is the expected number of building might be affected
assert format_int(535) in myResult, myMessage
assert format_int(453) in myResult, myMessage
assert format_int(436) in myResult, myMessage
def test_fullRunResults(self):
"""Aggregation results are correct."""
myExpectedResult = open(TEST_FILES_DIR + '/test-full-run-results.txt',
'r').read()
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function',
aggregation_layer='kabupaten jakarta singlepart',
aggregation_enabled_flag=True)
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
DOCK.accept()
DOCK.runtimeKeywordsDialog.accept()
myResult = DOCK.wvResults.page_to_text()
myMessage = ('The aggregation report should be:\n%s\n\nFound:\n\n%s' %
(myExpectedResult, myResult))
self.assertEqual(myResult, myExpectedResult, myMessage)
def test_issue45(self):
"""Points near the edge of a raster hazard layer are interpolated OK"""
myButton = DOCK.pbnRunStop
set_canvas_crs(GEOCRS, True)
set_yogya_extent()
myMessage = 'Run button was not enabled'
assert myButton.isEnabled(), myMessage
myResult, myMessage = setup_scenario(
DOCK,
hazard='An earthquake in Yogyakarta like in 2006',
exposure='OSM Building Polygons',
function='Earthquake Guidelines Function',
function_id='Earthquake Guidelines Function')
assert myResult, myMessage
# This is the where nosetest sometims hangs when running the
# guitest suite (Issue #103)
# The QTest.mouseClick call some times never returns when run
# with nosetest, but OK when run normally.
# noinspection PyCallByClass,PyTypeChecker
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Check that none of these get a NaN value:
self.assertIn('Unknown', myResult)
myMessage = ('Some buildings returned by Earthquake guidelines '
'function '
'had NaN values. Result: \n %s' % myResult)
assert 'Unknown (NaN): 196' not in myResult, myMessage
def Xtest_runnerExceptions(self):
"""Test runner exceptions"""
result, message = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Exception riser',
function_id='Exception Raising Impact Function',
aggregation_enabled_flag=True)
self.assertTrue(result, message)
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
DOCK.accept()
# DOCK.runtime_keywords_dialog.accept()
expected_result = """Error:
An exception occurred when calculating the results
Problem:
Exception : AHAHAH I got you
Click for Diagnostic Information:
"""
result = DOCK.wvResults.page_to_text()
message = (
'The result message should be:\n%s\nFound:\n%s' %
(expected_result, result))
self.assertEqual(expected_result, result, message)
def test_full_run_pyzstats(self):
"""Aggregation results correct using our own python zonal stats code.
"""
file_list = ['kabupaten_jakarta.shp']
load_layers(file_list, clear_flag=False, data_directory=BOUNDDATA)
result, message = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function',
aggregation_layer='kabupaten jakarta',
aggregation_enabled_flag=True)
self.assertTrue(result, message)
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
DOCK.accept()
result = DOCK.wvResults.page_to_text()
expected_result = open(
TEST_FILES_DIR +
'/test-full-run-results.txt',
'r').readlines()
result = result.replace(
'</td> <td>', ' ').replace('</td><td>', ' ')
for line in expected_result:
line = line.replace('\n', '')
self.assertIn(line, result)
def test_runFloodPopulationImpactFunction_scaling(self):
"""Flood function runs in GUI with 5x5km population data
Raster on raster based function runs as expected with scaling."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
myButton = DOCK.pbnRunStop
# noinspection PyCallByClass,PyTypeChecker
QTest.mouseClick(myButton, QtCore.Qt.LeftButton)
myResult = DOCK.wvResults.page_to_text()
myMessage = 'Result not as expected: %s' % myResult
# Check numbers are OK (within expected errors from resampling)
# These are expected impact number
assert format_int(10484) in myResult, myMessage
assert format_int(977) in myResult, myMessage
def test_fullRunResults(self):
"""Aggregation results are correct."""
myExpectedResult = open(
TEST_FILES_DIR +
'/test-full-run-results.txt',
'r').read()
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function',
aggregation_layer='kabupaten jakarta singlepart',
aggregation_enabled_flag=True)
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
DOCK.accept()
DOCK.runtimeKeywordsDialog.accept()
myResult = DOCK.wvResults.page_to_text()
myMessage = ('The aggregation report should be:\n%s\n\nFound:\n\n%s' %
(myExpectedResult, myResult))
self.assertEqual(myResult, myExpectedResult, myMessage)
def test_runEarthquakeFatalityFunction_small(self):
"""Padang 2009 fatalities estimated correctly (small extent)."""
# Push OK with the left mouse button
set_canvas_crs(GEOCRS, True)
set_padang_extent()
myResult, myMessage = setup_scenario(
DOCK,
hazard=PADANG2009_title,
exposure='People',
function='Earthquake Fatality Function',
function_id='Earthquake Fatality Function')
assert myResult, myMessage
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Check against expected output
myMessage = ('Unexpected result returned for Earthquake Fatality '
'Function Expected: fatality count of '
'116 , received: \n %s' % myResult)
assert format_int(116) in myResult, myMessage
myMessage = ('Unexpected result returned for Earthquake Fatality '
'Function Expected: total population count of '
'847529 , received: \n %s' % myResult)
assert format_int(847529) in myResult, myMessage
def test_runFloodPopulationImpactFunction_scaling(self):
"""Flood function runs in GUI with 5x5km population data
Raster on raster based function runs as expected with scaling."""
result, message = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
self.assertTrue(result, message)
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
button = DOCK.pbnRunStop
button.click()
result = DOCK.wvResults.page_to_text()
message = 'Result not as expected: %s' % result
# Check numbers are OK (within expected errors from resampling)
# These are expected impact number
self.assertTrue(format_int(10473000) in result, message)
self.assertTrue(format_int(978000) in result, message)
def Xtest_printMap(self):
"""Test print map, especially on Windows."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Essential buildings',
function='Be affected',
function_id='Categorised Hazard Building Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
myButton = DOCK.pbnRunStop
# noinspection PyCallByClass,PyTypeChecker
QTest.mouseClick(myButton, QtCore.Qt.LeftButton)
printButton = DOCK.pbnPrint
try:
# noinspection PyCallByClass,PyTypeChecker
QTest.mouseClick(printButton, QtCore.Qt.LeftButton)
except OSError:
LOGGER.debug('OSError')
# pass
except Exception, e:
raise Exception('Exception is not expected, %s' % e)
def test_postProcessorOutput(self):
"""Check that the post processor does not add spurious report rows."""
myRunButton = DOCK.pbnRunStop
# with KAB_NAME aggregation attribute defined in .keyword using
# kabupaten_jakarta_singlepart.shp
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
assert myResult, myMessage
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
QTest.mouseClick(myRunButton, QtCore.Qt.LeftButton)
myMessage = 'Spurious 0 filled rows added to post processing report.'
myResult = DOCK.wvResults.page().currentFrame().toPlainText()
for line in myResult.split('\n'):
if 'Entire area' in line:
myTokens = str(line).split('\t')
myTokens = myTokens[1:]
mySum = 0
for myToken in myTokens:
mySum += float(myToken.replace(',', '.'))
assert mySum != 0, myMessage
def test_runCategorisedHazardPopulationImpactFunction(self):
"""Flood function runs in GUI with Flood in Jakarta hazard data
Uses Penduduk Jakarta as exposure data."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Penduduk Jakarta',
function='Be impacted',
function_id='Categorised Hazard Population Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
myMessage = 'Result not as expected: %s' % myResult
# This is the expected number of population might be affected
assert format_int(30938000) in myResult, myMessage
assert format_int(68280000) in myResult, myMessage
assert format_int(157551000) in myResult, myMessage
def test_runEarthQuakeGuidelinesFunction(self):
"""GUI runs with Shakemap 2009 and Padang Buildings"""
# Push OK with the left mouse button
set_canvas_crs(GEOCRS, True)
set_padang_extent()
myResult, myMessage = setup_scenario(
DOCK,
hazard=PADANG2009_title,
exposure='Padang WGS84',
function='Earthquake Guidelines Function',
function_id='Earthquake Guidelines Function')
assert myResult, myMessage
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Expected output:
#Buildings Total
#All: 3160
#Low damage (10-25%): 0
#Medium damage (25-50%): 0
#Pre merge of clip on steroids branch:
#High damage (50-100%): 3160
# Post merge of clip on steoids branch:
#High damage (50-100%): 2993
myMessage = ('Unexpected result returned for Earthquake guidelines'
'function. Expected:\n "All" count of 2993, '
'received: \n %s' % myResult)
assert format_int(2993) in myResult, myMessage
def Xtest_runnerIsNone(self):
"""Test for none runner exceptions"""
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='None returner',
function_id='None Returning Impact Function',
aggregation_enabled_flag=True)
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
DOCK.accept()
# DOCK.runtimeKeywordsDialog.accept()
myExpectedResult = """Error:
An exception occurred when calculating the results
Problem:
AttributeError : 'NoneType' object has no attribute 'keywords'
Click for Diagnostic Information:
"""
myResult = DOCK.wvResults.page_to_text()
myMessage = ('The result message should be:\n%s\nFound:\n%s' %
(myExpectedResult, myResult))
self.assertEqual(myExpectedResult, myResult, myMessage)
def test_runFloodPopulationImpactFunction_scaling(self):
"""Flood function runs in GUI with 5x5km population data
Raster on raster based function runs as expected with scaling."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
myButton = DOCK.pbnRunStop
# noinspection PyCallByClass,PyTypeChecker
QTest.mouseClick(myButton, QtCore.Qt.LeftButton)
myResult = DOCK.wvResults.page_to_text()
myMessage = 'Result not as expected: %s' % myResult
# Check numbers are OK (within expected errors from resampling)
# These are expected impact number
assert format_int(10484) in myResult, myMessage
assert format_int(977) in myResult, myMessage
def test_postProcessorOutput(self):
"""Check that the post processor does not add spurious report rows."""
myRunButton = DOCK.pbnRunStop
# with KAB_NAME aggregation attribute defined in .keyword using
# kabupaten_jakarta_singlepart.shp
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
assert myResult, myMessage
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
QTest.mouseClick(myRunButton, QtCore.Qt.LeftButton)
myMessage = 'Spurious 0 filled rows added to post processing report.'
myResult = DOCK.wvResults.page().currentFrame().toPlainText()
for line in myResult.split('\n'):
if 'Entire area' in line:
myTokens = str(line).split('\t')
myTokens = myTokens[1:]
mySum = 0
for myToken in myTokens:
mySum += float(myToken.replace(',', '.'))
assert mySum != 0, myMessage
def Xtest_printMap(self):
"""Test print map, especially on Windows."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Essential buildings',
function='Be affected',
function_id='Categorised Hazard Building Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
myButton = DOCK.pbnRunStop
# noinspection PyCallByClass,PyTypeChecker
QTest.mouseClick(myButton, QtCore.Qt.LeftButton)
printButton = DOCK.pbnPrint
try:
# noinspection PyCallByClass,PyTypeChecker
QTest.mouseClick(printButton, QtCore.Qt.LeftButton)
except OSError:
LOGGER.debug('OSError')
# pass
except Exception, e:
raise Exception('Exception is not expected, %s' % e)
def test_issue45(self):
"""Points near the edge of a raster hazard layer are interpolated OK"""
myButton = DOCK.pbnRunStop
set_canvas_crs(GEOCRS, True)
set_yogya_extent()
myMessage = 'Run button was not enabled'
assert myButton.isEnabled(), myMessage
myResult, myMessage = setup_scenario(
DOCK,
hazard='An earthquake in Yogyakarta like in 2006',
exposure='OSM Building Polygons',
function='Earthquake Guidelines Function',
function_id='Earthquake Guidelines Function')
assert myResult, myMessage
# This is the where nosetest sometims hangs when running the
# guitest suite (Issue #103)
# The QTest.mouseClick call some times never returns when run
# with nosetest, but OK when run normally.
# noinspection PyCallByClass,PyTypeChecker
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Check that none of these get a NaN value:
self.assertIn('Unknown', myResult)
myMessage = ('Some buildings returned by Earthquake guidelines '
'function '
'had NaN values. Result: \n %s' % myResult)
assert 'Unknown (NaN): 196' not in myResult, myMessage
def test_issue306(self):
"""Issue306: CANVAS doesnt add generated layers in tests
See https://github.com/AIFDR/inasafe/issues/306"""
result, message = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='Penduduk Jakarta',
function='HKVtest',
function_id='HKVtest')
self.assertTrue(result, message)
LOGGER.info("Canvas list before:\n%s" % canvas_list())
# Enable on-the-fly reprojection
set_canvas_crs(GOOGLECRS, True)
set_jakarta_google_extent()
before_count = len(CANVAS.layers())
#print 'Before count %s' % before_count
# Press RUN
DOCK.accept()
# test issue #306
after_count = len(CANVAS.layers())
LOGGER.info("Canvas list after:\n%s" % canvas_list())
message = ('Layer was not added to canvas (%s before, %s after)' % (
before_count, after_count))
#print 'After count %s' % after_count
self.assertTrue(before_count == after_count - 1, message)
def test_runCategorisedHazardPopulationImpactFunction(self):
"""Flood function runs in GUI with Flood in Jakarta hazard data
Uses Penduduk Jakarta as exposure data."""
result, message = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Penduduk Jakarta',
function='Be impacted',
function_id='Categorised Hazard Population Impact Function')
self.assertTrue(result, message)
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
DOCK.accept()
result = DOCK.wvResults.page_to_text()
message = ('Result not as expected: %s' % result)
# This is the expected number of population might be affected
self.assertTrue(format_int(30938000) in result, message) # high
#self.assertTrue(format_int(68280000) in result, message)
#self.assertTrue(format_int(157551000) in result, message)
# The 2 asserts above are not valid anymore after the fix we made to
# CategorisedHazardPopulationImpactFunction
# Look at the fix here:
# (https://github.com/AIFDR/inasafe/commit/aa5b3d72145c031c91f4d101b830
# 8228915c248d#diff-378093670f4ebd60b4487af9b7c2e164)
# New Asserts
self.assertTrue(format_int(0) in result, message) # medium
self.assertTrue(format_int(256769000) in result, message) # low
def test_runEarthquakeFatalityFunction_small(self):
"""Padang 2009 fatalities estimated correctly (small extent)."""
# Push OK with the left mouse button
set_canvas_crs(GEOCRS, True)
set_padang_extent()
myResult, myMessage = setup_scenario(
DOCK,
hazard=PADANG2009_title,
exposure='People',
function='Earthquake Fatality Function',
function_id='Earthquake Fatality Function')
assert myResult, myMessage
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Check against expected output
myMessage = ('Unexpected result returned for Earthquake Fatality '
'Function Expected: fatality count of '
'116 , received: \n %s' % myResult)
assert format_int(116) in myResult, myMessage
myMessage = ('Unexpected result returned for Earthquake Fatality '
'Function Expected: total population count of '
'847529 , received: \n %s' % myResult)
assert format_int(847529) in myResult, myMessage
def test_runEarthquakeBuildingImpactFunction(self):
"""Earthquake function runs in GUI with An earthquake in Yogyakarta
like in 2006 hazard data uses OSM Building Polygons exposure data."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='An earthquake in Yogyakarta like in 2006',
exposure='OSM Building Polygons',
function='Be affected',
function_id='Earthquake Building Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_geo_extent([101, -12, 119, -4])
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
LOGGER.debug(myResult)
myMessage = 'Result not as expected: %s' % myResult
# This is the expected number of building might be affected
assert format_int(786) in myResult, myMessage
assert format_int(15528) in myResult, myMessage
assert format_int(177) in myResult, myMessage
def test_runFloodPopulationImpactFunction(self):
"""Flood function runs in GUI with Jakarta data
Raster on raster based function runs as expected."""
# Push OK with the left mouse button
myButton = DOCK.pbnRunStop
myMessage = 'Run button was not enabled'
assert myButton.isEnabled(), myMessage
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='Penduduk Jakarta',
function='HKVtest',
function_id='HKVtest')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Check that the number is as what was calculated by
# Marco Hartman form HKV
myMessage = 'Result not as expected: %s' % myResult
# This is the expected impact number
assert format_int(2480) in myResult, myMessage
def test_runCategorisedHazardPopulationImpactFunction(self):
"""Flood function runs in GUI with Flood in Jakarta hazard data
Uses Penduduk Jakarta as exposure data."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Penduduk Jakarta',
function='Be impacted',
function_id='Categorised Hazard Population Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
myMessage = 'Result not as expected: %s' % myResult
# This is the expected number of population might be affected
assert format_int(30938000) in myResult, myMessage
assert format_int(68280000) in myResult, myMessage
assert format_int(157551000) in myResult, myMessage
def test_runCategorizedHazardBuildingImpact(self):
"""Flood function runs in GUI with Flood in Jakarta hazard data
Uses DKI buildings exposure data."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Essential buildings',
function='Be affected',
function_id='Categorised Hazard Building Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
myMessage = 'Result not as expected: %s' % myResult
# This is the expected number of building might be affected
assert format_int(535) in myResult, myMessage
assert format_int(453) in myResult, myMessage
assert format_int(436) in myResult, myMessage
def test_issue581(self):
"""Test issue #581 in github - Humanize can produce IndexError : list
index out of range
"""
# See https://github.com/AIFDR/inasafe/issues/581
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_small_jakarta_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page().currentFrame().toPlainText()
myMessage = 'Result not as expected: %s' % myResult
assert 'IndexError' not in myResult, myMessage
assert 'It appears that no People are affected by A flood in ' \
'Jakarta like in 2007. You may want to consider:' in myResult
def test_runEarthquakeBuildingImpactFunction(self):
"""Earthquake function runs in GUI with An earthquake in Yogyakarta
like in 2006 hazard data uses OSM Building Polygons exposure data."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='An earthquake in Yogyakarta like in 2006',
exposure='OSM Building Polygons',
function='Be affected',
function_id='Earthquake Building Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_geo_extent([101, -12, 119, -4])
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
LOGGER.debug(myResult)
myMessage = 'Result not as expected: %s' % myResult
# This is the expected number of building might be affected
assert format_int(786) in myResult, myMessage
assert format_int(15528) in myResult, myMessage
assert format_int(177) in myResult, myMessage
def test_post_processor_output(self):
"""Check that the post processor does not add spurious report rows."""
# with KAB_NAME aggregation attribute defined in .keyword using
# kabupaten_jakarta_singlepart.shp
result, message = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function_id='Flood Evacuation Function')
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
assert result, message
# Press RUN
DOCK.accept()
message = 'Spurious 0 filled rows added to post processing report.'
result = DOCK.wvResults.page().currentFrame().toPlainText()
for line in result.split('\n'):
if 'Entire area' in line:
tokens = str(line).split('\t')
tokens = tokens[1:]
total = 0
for token in tokens:
total += float(token.replace(',', '.'))
assert total != 0, message
def Xtest_runnerIsNone(self):
"""Test for none runner exceptions"""
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='None returner',
function_id='None Returning Impact Function',
aggregation_enabled_flag=True)
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
DOCK.accept()
# DOCK.runtimeKeywordsDialog.accept()
myExpectedResult = """Error:
An exception occurred when calculating the results
Problem:
AttributeError : 'NoneType' object has no attribute 'keywords'
Click for Diagnostic Information:
"""
myResult = DOCK.wvResults.page_to_text()
myMessage = ('The result message should be:\n%s\nFound:\n%s' %
(myExpectedResult, myResult))
self.assertEqual(myExpectedResult, myResult, myMessage)
def test_runEarthQuakeGuidelinesFunction(self):
"""GUI runs with Shakemap 2009 and Padang Buildings"""
# Push OK with the left mouse button
set_canvas_crs(GEOCRS, True)
set_padang_extent()
myResult, myMessage = setup_scenario(
DOCK,
hazard=PADANG2009_title,
exposure='Padang WGS84',
function='Earthquake Guidelines Function',
function_id='Earthquake Guidelines Function')
assert myResult, myMessage
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Expected output:
#Buildings Total
#All: 3160
#Low damage (10-25%): 0
#Medium damage (25-50%): 0
#Pre merge of clip on steroids branch:
#High damage (50-100%): 3160
# Post merge of clip on steoids branch:
#High damage (50-100%): 2993
myMessage = ('Unexpected result returned for Earthquake guidelines'
'function. Expected:\n "All" count of 2993, '
'received: \n %s' % myResult)
assert format_int(2993) in myResult, myMessage
def test_post_processor_output(self):
"""Check that the post processor does not add spurious report rows."""
# with KAB_NAME aggregation attribute defined in .keyword using
# kabupaten_jakarta_singlepart.shp
result, message = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
assert result, message
# Press RUN
DOCK.accept()
message = 'Spurious 0 filled rows added to post processing report.'
result = DOCK.wvResults.page().currentFrame().toPlainText()
for line in result.split('\n'):
if 'Entire area' in line:
tokens = str(line).split('\t')
tokens = tokens[1:]
total = 0
for token in tokens:
total += float(token.replace(',', '.'))
assert total != 0, message
def test_runFloodPopulationImpactFunction(self):
"""Flood function runs in GUI with Jakarta data
Raster on raster based function runs as expected."""
# Push OK with the left mouse button
myButton = DOCK.pbnRunStop
myMessage = 'Run button was not enabled'
assert myButton.isEnabled(), myMessage
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='Penduduk Jakarta',
function='HKVtest',
function_id='HKVtest')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Check that the number is as what was calculated by
# Marco Hartman form HKV
myMessage = 'Result not as expected: %s' % myResult
# This is the expected impact number
assert format_int(2480) in myResult, myMessage
def test_runEarthquakeFatalityFunction_Padang_full(self):
"""Padang 2009 fatalities estimated correctly (large extent)"""
# Push OK with the left mouse button
button = DOCK.pbnRunStop
set_canvas_crs(GEOCRS, True)
set_geo_extent([96, -5, 105, 2]) # This covers all of the 2009 shaking
message = 'Run button was not enabled'
self.assertTrue(button.isEnabled(), message)
# Hazard layers
index = DOCK.cboHazard.findText(PADANG2009_title)
self.assertTrue(
index != -1, 'Padang 2009 scenario hazard layer not found')
DOCK.cboHazard.setCurrentIndex(index)
# Exposure layers
index = DOCK.cboExposure.findText('People')
self.assertTrue(index != -1, 'People')
DOCK.cboExposure.setCurrentIndex(index)
# Choose impact function
index = DOCK.cboFunction.findText('Earthquake Fatality Function')
message = (
'Earthquake Fatality Function not '
'found: ' + combos_to_string(DOCK))
self.assertTrue(index != -1, message)
DOCK.cboFunction.setCurrentIndex(index)
actual_dict = get_ui_state(DOCK)
expected_dict = {
'Hazard': PADANG2009_title,
'Exposure': 'People',
'Impact Function Id': 'Earthquake Fatality Function',
'Impact Function Title': 'Earthquake Fatality Function',
'Run Button Enabled': True}
message = 'Got unexpected state: %s\nExpected: %s\n%s' % (
actual_dict, expected_dict, combos_to_string(DOCK))
self.assertTrue(actual_dict == expected_dict, message)
DOCK.accept()
result = DOCK.wvResults.page_to_text()
# Check against expected output
message = (
'Unexpected result returned for Earthquake Fatality '
'Function Expected: fatality count of '
'500 , received: \n %s' % result)
self.assertTrue(format_int(500) in result, message)
message = (
'Unexpected result returned for Earthquake Fatality '
'Function Expected: total population count of '
'31374747 , received: \n %s' % result)
self.assertTrue(format_int(31374747) in result, message)
def test_issue160(self):
"""Test that multipart features can be used in a scenario - issue #160
"""
exposure = os.path.join(
UNITDATA, 'exposure', 'buildings_osm_4326.shp')
hazard = os.path.join(
UNITDATA, 'hazard', 'multipart_polygons_osm_4326.shp')
# See https://github.com/AIFDR/inasafe/issues/71
# Push OK with the left mouse button
#print 'Using QGIS: %s' % qgis_version()
self.tearDown()
button = DOCK.pbnRunStop
# First part of scenario should have enabled run
file_list = [hazard, exposure]
hazard_layer_count, exposure_layer_count = load_layers(file_list)
message = (
'Incorrect number of Hazard layers: expected 1 got %s'
% hazard_layer_count)
self.assertTrue(hazard_layer_count == 1, message)
message = (
'Incorrect number of Exposure layers: expected 1 got %s'
% exposure_layer_count)
self.assertTrue(exposure_layer_count == 1, message)
message = 'Run button was not enabled'
self.assertTrue(button.isEnabled(), message)
# Second part of scenario - run disabled when adding invalid layer
# and select it - run should be disabled
file_list = ['issue71.tif'] # This layer has incorrect keywords
clear_flag = False
_, _ = load_layers(file_list, clear_flag)
result, message = setup_scenario(
DOCK,
hazard='multipart_polygons_osm_4326',
exposure='buildings_osm_4326',
function='Be flooded',
function_id='Flood Building Impact Function')
self.assertTrue(result, message)
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
IFACE.mapCanvas().setExtent(
QgsRectangle(106.788, -6.193, 106.853, -6.167))
# Press RUN
# noinspection PyCallByClass,PyCallByClass,PyTypeChecker
DOCK.accept()
result = DOCK.wvResults.page_to_text()
message = 'Result not as expected: %s' % result
self.assertTrue(format_int(68) in result, message)
def test_save_scenario(self):
"""Test saving Current scenario."""
result, message = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Penduduk Jakarta',
function='Be impacted',
function_id='Categorised Hazard Population Impact Function')
self.assertTrue(result, message)
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# create unique file
scenario_file = unique_filename(
prefix='scenarioTest', suffix='.txt', dir=temp_dir('test'))
self.save_scenario_dialog.save_scenario(
scenario_file_path=scenario_file)
with open(scenario_file) as f:
data = f.readlines()
title = data[0][:-1]
exposure = data[1][:-1]
hazard = data[2][:-1]
function = data[3][:-1]
extent = data[4][:-1]
self.assertTrue(
os.path.exists(scenario_file),
'File %s does not exist' % scenario_file)
self.assertTrue(title == '[Flood in Jakarta]', 'Title is not the same')
self.assertTrue(
exposure.startswith('exposure =') and exposure.endswith(
'Population_Jakarta_geographic.asc'),
'Exposure is not the same')
self.assertTrue(
hazard.startswith('hazard =') and hazard.endswith(
'jakarta_flood_category_123.asc'),
'Hazard is not the same')
self.assertTrue(
function == (
'function = Categorised Hazard Population Impact Function'),
'Impact function is not same')
# TODO: figure out why this changed between releases
if qgis_version() < 20400:
# For QGIS 2.0
expected_extent = (
'extent = 106.313333, -6.380000, 107.346667, -6.070000')
self.assertEqual(expected_extent, extent)
else:
# for QGIS 2.4
expected_extent = (
'extent = 106.287500, -6.380000, 107.372500, -6.070000')
self.assertEqual(expected_extent, expected_extent)
def test_save_scenario(self):
"""Test saving Current scenario."""
result, message = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Penduduk Jakarta',
function='Be impacted',
function_id='Categorised Hazard Population Impact Function')
self.assertTrue(result, message)
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent(dock=DOCK)
# create unique file
scenario_file = unique_filename(
prefix='scenarioTest', suffix='.txt', dir=temp_dir('test'))
self.save_scenario_dialog.save_scenario(
scenario_file_path=scenario_file)
with open(scenario_file) as f:
data = f.readlines()
title = data[0][:-1]
exposure = data[1][:-1]
hazard = data[2][:-1]
function = data[3][:-1]
extent = data[4][:-1]
self.assertTrue(
os.path.exists(scenario_file),
'File %s does not exist' % scenario_file)
self.assertTrue(title == '[Flood in Jakarta]', 'Title is not the same')
self.assertTrue(
exposure.startswith('exposure =') and exposure.endswith(
'Population_Jakarta_geographic.asc'),
'Exposure is not the same')
self.assertTrue(
hazard.startswith('hazard =') and hazard.endswith(
'jakarta_flood_category_123.asc'),
'Hazard is not the same')
self.assertTrue(
function == (
'function = Categorised Hazard Population Impact Function'),
'Impact function is not same')
# TODO: figure out why this changed between releases
if qgis_version() < 20400:
# For QGIS 2.0
expected_extent = (
'extent = 106.313333, -6.380000, 107.346667, -6.070000')
self.assertEqual(expected_extent, extent)
else:
# for QGIS 2.4
expected_extent = (
'extent = 106.287500, -6.380000, 107.372500, -6.070000')
self.assertEqual(expected_extent, expected_extent)
def test_runEarthquakeFatalityFunction_Padang_full(self):
"""Padang 2009 fatalities estimated correctly (large extent)"""
# Push OK with the left mouse button
myButton = DOCK.pbnRunStop
set_canvas_crs(GEOCRS, True)
set_geo_extent([96, -5, 105, 2]) # This covers all of the 2009 shaking
myMessage = 'Run button was not enabled'
assert myButton.isEnabled(), myMessage
# Hazard layers
myIndex = DOCK.cboHazard.findText(PADANG2009_title)
assert myIndex != -1, 'Padang 2009 scenario hazard layer not found'
DOCK.cboHazard.setCurrentIndex(myIndex)
# Exposure layers
myIndex = DOCK.cboExposure.findText('People')
assert myIndex != -1, 'People'
DOCK.cboExposure.setCurrentIndex(myIndex)
# Choose impact function
myIndex = DOCK.cboFunction.findText('Earthquake Fatality Function')
myMessage = ('Earthquake Fatality Function not '
'found: ' + combos_to_string(DOCK))
assert myIndex != -1, myMessage
DOCK.cboFunction.setCurrentIndex(myIndex)
myDict = get_ui_state(DOCK)
myExpectedDict = {
'Hazard': PADANG2009_title,
'Exposure': 'People',
'Impact Function Id': 'Earthquake Fatality Function',
'Impact Function Title': 'Earthquake Fatality Function',
'Run Button Enabled': True
}
myMessage = 'Got unexpected state: %s\nExpected: %s\n%s' % (
myDict, myExpectedDict, combos_to_string(DOCK))
assert myDict == myExpectedDict, myMessage
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
# Check against expected output
myMessage = ('Unexpected result returned for Earthquake Fatality '
'Function Expected: fatality count of '
'500 , received: \n %s' % myResult)
assert format_int(500) in myResult, myMessage
myMessage = ('Unexpected result returned for Earthquake Fatality '
'Function Expected: total population count of '
'31372262 , received: \n %s' % myResult)
assert format_int(31372262) in myResult, myMessage
def test_issue160(self):
"""Test that multipart features can be used in a scenario - issue #160
"""
myExposure = os.path.join(UNITDATA, 'exposure',
'buildings_osm_4326.shp')
myHazard = os.path.join(UNITDATA, 'hazard',
'multipart_polygons_osm_4326.shp')
# See https://github.com/AIFDR/inasafe/issues/71
# Push OK with the left mouse button
print 'Using QGIS: %s' % qgis_version()
self.tearDown()
myButton = DOCK.pbnRunStop
# First part of scenario should have enabled run
myFileList = [myHazard, myExposure]
myHazardLayerCount, myExposureLayerCount = load_layers(myFileList)
myMessage = ('Incorrect number of Hazard layers: expected 1 got %s' %
myHazardLayerCount)
assert myHazardLayerCount == 1, myMessage
myMessage = ('Incorrect number of Exposure layers: expected 1 got %s' %
myExposureLayerCount)
assert myExposureLayerCount == 1, myMessage
myMessage = 'Run button was not enabled'
assert myButton.isEnabled(), myMessage
# Second part of scenario - run disabled when adding invalid layer
# and select it - run should be disabled
myFileList = ['issue71.tif'] # This layer has incorrect keywords
myClearFlag = False
_, _ = load_layers(myFileList, myClearFlag)
myResult, myMessage = setup_scenario(
DOCK,
hazard='multipart_polygons_osm_4326',
exposure='buildings_osm_4326',
function='Be flooded',
function_id='Flood Building Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
IFACE.mapCanvas().setExtent(
QgsRectangle(106.788, -6.193, 106.853, -6.167))
# Press RUN
# noinspection PyCallByClass,PyCallByClass,PyTypeChecker
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
myMessage = 'Result not as expected: %s' % myResult
assert format_int(68) in myResult, myMessage
def test_issue317(self):
"""Points near the edge of a raster hazard layer are interpolated OK"""
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='OSM Building Polygons',
function='Be flooded',
function_id='Flood Building Impact Function')
DOCK.get_functions()
assert myResult, myMessage
def test_issue317(self):
"""Points near the edge of a raster hazard layer are interpolated OK"""
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='OSM Building Polygons',
function='Be flooded',
function_id='Flood Building Impact Function')
DOCK.get_functions()
assert myResult, myMessage
def test_hasParametersButtonEnabled(self):
"""Function configuration button is enabled when layers are compatible.
"""
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
setup_scenario(DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='Penduduk Jakarta',
function='Need evacuation',
function_id='Flood Evacuation Function')
myToolButton = DOCK.toolFunctionOptions
myFlag = myToolButton.isEnabled()
assert myFlag, 'Expected configuration options button to be enabled'
def Xtest_extentsChanged(self):
"""Memory requirements are calculated correctly when extents change.
"""
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
setup_scenario(DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='Penduduk Jakarta',
function='Need evacuation',
function_id='Flood Evacuation Function')
myResult = DOCK.checkMemoryUsage()
myMessage = 'Expected "3mb" to apear in : %s' % myResult
assert myResult is not None, 'Check memory reported None'
assert '3mb' in myResult, myMessage
def test_hasParametersButtonEnabled(self):
"""Function configuration button is enabled when layers are compatible.
"""
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='Penduduk Jakarta',
function='Need evacuation',
function_id='Flood Evacuation Function')
myToolButton = DOCK.toolFunctionOptions
myFlag = myToolButton.isEnabled()
assert myFlag, 'Expected configuration options button to be enabled'
def Xtest_extentsChanged(self):
"""Memory requirements are calculated correctly when extents change.
"""
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='Penduduk Jakarta',
function='Need evacuation',
function_id='Flood Evacuation Function')
myResult = DOCK.checkMemoryUsage()
myMessage = 'Expected "3mb" to apear in : %s' % myResult
assert myResult is not None, 'Check memory reported None'
assert '3mb' in myResult, myMessage
def test_full_run_qgszstats(self):
"""Aggregation results are correct using native QGIS zonal stats.
.. note:: We know this is going to fail (hence the decorator) as
QGIS1.8 zonal stats are broken. We expect this to pass when we
have ported to the QGIS 2.0 api at which time we can remove the
decorator. TS July 2013
"""
# TODO check that the values are similar enough to the python stats
file_list = ['kabupaten_jakarta.shp']
load_layers(file_list, clear_flag=False, data_directory=BOUNDDATA)
result, message = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function',
aggregation_layer='kabupaten jakarta',
aggregation_enabled_flag=True)
self.assertTrue(result, message)
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
# noinspection PyCallByClass,PyTypeChecker
# use QGIS zonal stats only in the test
qgis_zonal_flag = bool(QtCore.QSettings().value(
'inasafe/use_native_zonal_stats', False, type=bool))
QtCore.QSettings().setValue('inasafe/use_native_zonal_stats', True)
DOCK.accept()
QtCore.QSettings().setValue('inasafe/use_native_zonal_stats',
qgis_zonal_flag)
result = DOCK.wvResults.page_to_text()
expected_result = open(
TEST_FILES_DIR +
'/test-full-run-results-qgis.txt', 'rb').readlines()
result = result.replace(
'</td> <td>', ' ').replace('</td><td>', ' ')
for line in expected_result:
line = line.replace('\n', '')
self.assertIn(line, result)
def test_vectorProjections(self):
"""Test that vector input data is reprojected properly during clip"""
# Input data is OSM in GOOGLE CRS
# We are reprojecting to GEO and expecting the output shp to be in GEO
# see https://github.com/AIFDR/inasafe/issues/119
# and https://github.com/AIFDR/inasafe/issues/95
myVectorLayer = QgsVectorLayer(VECTOR_PATH2, 'OSM Buildings', 'ogr')
message = 'Failed to load osm buildings'
assert myVectorLayer is not None, message
assert myVectorLayer.isValid()
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
myClipRect = [106.52, -6.38, 107.14, -6.07]
# Clip the vector to the bbox
myResult = clip_layer(myVectorLayer, myClipRect)
assert (os.path.exists(myResult.source()))
def test_vector_projections(self):
"""Test that vector input data is reprojected properly during clip."""
# Input data is OSM in GOOGLE CRS
# We are reprojecting to GEO and expecting the output shp to be in GEO
# see https://github.com/AIFDR/inasafe/issues/119
# and https://github.com/AIFDR/inasafe/issues/95
vector_layer = QgsVectorLayer(
VECTOR_PATH2, 'OSM Buildings', 'ogr')
message = 'Failed to load osm buildings'
assert vector_layer is not None, message
assert vector_layer.isValid()
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
clip_rectangle = [106.52, -6.38, 107.14, -6.07]
# Clip the vector to the bbox
result = clip_layer(vector_layer, clip_rectangle)
assert(os.path.exists(result.source()))
def test_clipVectorHard(self):
"""Vector layers can be hard clipped.
Hard clipping will remove any dangling, non intersecting elements.
"""
myVectorLayer = QgsVectorLayer(VECTOR_PATH3, 'OSM Buildings', 'ogr')
message = 'Failed to load osm buildings'
assert myVectorLayer is not None, message
assert myVectorLayer.isValid()
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
myClipRect = [106.8218, -6.1842, 106.8232, -6.1830]
# Clip the vector to the bbox
myResult = clip_layer(myVectorLayer, myClipRect, hard_clip_flag=True)
# Check the output is valid
assert (os.path.exists(myResult.source()))
def test_clip_vector_hard(self):
"""Vector layers can be hard clipped.
Hard clipping will remove any dangling, non intersecting elements.
"""
vector_layer = QgsVectorLayer(
VECTOR_PATH3, 'OSM Buildings', 'ogr')
message = 'Failed to load osm buildings'
assert vector_layer is not None, message
assert vector_layer.isValid()
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
clip_rectangle = [106.8218, -6.1842, 106.8232, -6.1830]
# Clip the vector to the bbox
result = clip_layer(vector_layer, clip_rectangle, hard_clip_flag=True)
# Check the output is valid
assert(os.path.exists(result.source()))
def test_hasParametersButtonDisabled(self):
"""Function configuration button is disabled
when layers not compatible."""
set_canvas_crs(GEOCRS, True)
#add additional layers
#myResult, myMessage = setupScenario(
# heHazard='An earthquake in Yogyakarta like in 2006',
# theExposure = 'Essential Buildings',
# theFunction = 'Be damaged depending on building type',
# theFunctionId = 'ITB Earthquake Building Damage Function')
setup_scenario(DOCK,
hazard='An earthquake in Yogyakarta like in 2006',
exposure='Essential Buildings',
function='Be damaged depending on building type',
function_id='ITB Earthquake Building Damage Function')
myToolButton = DOCK.toolFunctionOptions
myFlag = myToolButton.isEnabled()
assert not myFlag, ('Expected configuration options '
'button to be disabled')
def test_hasParametersButtonDisabled(self):
"""Function configuration button is disabled
when layers not compatible."""
set_canvas_crs(GEOCRS, True)
#add additional layers
#myResult, myMessage = setupScenario(
# heHazard='An earthquake in Yogyakarta like in 2006',
# theExposure = 'Essential Buildings',
# theFunction = 'Be damaged depending on building type',
# theFunctionId = 'ITB Earthquake Building Damage Function')
setup_scenario(
DOCK,
hazard='An earthquake in Yogyakarta like in 2006',
exposure='Essential Buildings',
function='Be damaged depending on building type',
function_id='ITB Earthquake Building Damage Function')
myToolButton = DOCK.toolFunctionOptions
myFlag = myToolButton.isEnabled()
assert not myFlag, ('Expected configuration options '
'button to be disabled')
def test_runTsunamiBuildingImpactFunction(self):
"""Tsunami function runs in GUI as expected."""
# Push OK with the left mouse button
myButton = DOCK.pbnRunStop
myMessage = 'Run button was not enabled'
assert myButton.isEnabled(), myMessage
myResult, myMessage = setup_scenario(
DOCK,
hazard='Tsunami Max Inundation',
exposure='Tsunami Building Exposure',
function='Be flooded',
function_id='Flood Building Impact Function')
assert myResult, myMessage
set_canvas_crs(GEOCRS, True)
set_batemans_bay_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
#print myResult
# Post clip on steroids refactor
# < 1 m: 1923
# 1 - 3 m: 89
# > 3 m: 0
# Post replacement of Batemans Bay dataset
#< 1 m: 10
#1 - 3 m: 7
#> 3 m: 0
# Post rewrite of impact function
#Building type closed Total
#All 7 17
myMessage = 'Result not as expected: %s' % myResult
assert format_int(17) in myResult, myMessage
assert format_int(7) in myResult, myMessage
def test_runTsunamiBuildingImpactFunction(self):
"""Tsunami function runs in GUI as expected."""
# Push OK with the left mouse button
myButton = DOCK.pbnRunStop
myMessage = 'Run button was not enabled'
assert myButton.isEnabled(), myMessage
myResult, myMessage = setup_scenario(
DOCK,
hazard='Tsunami Max Inundation',
exposure='Tsunami Building Exposure',
function='Be flooded',
function_id='Flood Building Impact Function')
assert myResult, myMessage
set_canvas_crs(GEOCRS, True)
set_batemans_bay_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
#print myResult
# Post clip on steroids refactor
# < 1 m: 1923
# 1 - 3 m: 89
# > 3 m: 0
# Post replacement of Batemans Bay dataset
#< 1 m: 10
#1 - 3 m: 7
#> 3 m: 0
# Post rewrite of impact function
#Building type closed Total
#All 7 17
myMessage = 'Result not as expected: %s' % myResult
assert format_int(17) in myResult, myMessage
assert format_int(7) in myResult, myMessage
def test_preprocessing(self):
"""Preprocessing results are correct.
TODO - this needs to be fixed post dock refactor.
"""
# See qgis project in test data: vector_preprocessing_test.qgs
#add additional layers
myFileList = ['jakarta_crosskabupaten_polygons.shp']
load_layers(myFileList, clear_flag=False, data_directory=TESTDATA)
myFileList = ['kabupaten_jakarta.shp']
load_layers(myFileList, clear_flag=False, data_directory=BOUNDDATA)
myRunButton = DOCK.pbnRunStop
myResult, myMessage = setup_scenario(
DOCK,
hazard='jakarta_crosskabupaten_polygons',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function Vector Hazard',
aggregation_layer='kabupaten jakarta',
aggregation_enabled_flag=True)
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Press RUN
# noinspection PyTypeChecker,PyCallByClass
QTest.mouseClick(myRunButton, QtCore.Qt.LeftButton)
DOCK.runtimeKeywordsDialog.accept()
myExpectedFeatureCount = 20
myMessage = ('The preprocessing should have generated %s features, '
'found %s' % (myExpectedFeatureCount,
DOCK.aggregator.preprocessedFeatureCount))
self.assertEqual(myExpectedFeatureCount,
DOCK.aggregator.preprocessedFeatureCount,
myMessage)
def test_saveCurrentScenario(self):
"""Test saving Current scenario
"""
myResult, myMessage = setup_scenario(
DOCK,
hazard='Flood in Jakarta',
exposure='Penduduk Jakarta',
function='Be impacted',
function_id='Categorised Hazard Population Impact Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# create unique file
myScenarioFile = unique_filename(prefix='scenarioTest',
suffix='.txt',
dir=temp_dir('test'))
DOCK.save_current_scenario(theScenarioFilePath=myScenarioFile)
with open(myScenarioFile, 'rt') as f:
data = f.readlines()
myTitle = data[0][:-1]
myExposure = data[1][:-1]
myHazard = data[2][:-1]
myFunction = data[3][:-1]
myExtent = data[4][:-1]
assert os.path.exists(myScenarioFile), \
'File %s does not exist' % myScenarioFile
assert myTitle == '[Flood in Jakarta]', 'Title is not the same'
assert myExposure.startswith('exposure =') and myExposure.endswith(
'Population_Jakarta_geographic.asc'), 'Exposure is not the same'
assert myHazard.startswith('hazard =') and myHazard.endswith(
'jakarta_flood_category_123.asc'), 'Hazard is not the same'
assert myFunction == 'function = Categorised Hazard Population ' \
'Impact Function', 'Impact function is not same'
assert myExtent == 'extent = 106.3133333333333326, ' \
'-6.3799999999999999, 107.3466666666666640, ' \
'-6.0700000000000003', 'Extent is not same'
def test_resultStyling(self):
"""Test that ouputs from a model are correctly styled (colours and
opacity. """
# Push OK with the left mouse button
print '--------------------'
print combos_to_string(DOCK)
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='People',
function='Need evacuation',
function_id='Flood Evacuation Function')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_jakarta_extent()
# Run manually so we can get the output layer
DOCK.prepare_aggregator()
DOCK.aggregator.validate_keywords()
DOCK.setup_calculator()
myRunner = DOCK.calculator.get_runner()
myRunner.run() # Run in same thread
myEngineImpactLayer = myRunner.impact_layer()
myQgisImpactLayer = read_impact_layer(myEngineImpactLayer)
myStyle = myEngineImpactLayer.get_style_info()
#print myStyle
setRasterStyle(myQgisImpactLayer, myStyle)
# simple test for now - we could test explicity for style state
# later if needed.
myMessage = ('Raster layer was not assigned a ColorRampShader'
' as expected.')
assert myQgisImpactLayer.colorShadingAlgorithm() == QgsRasterLayer. \
ColorRampShader, myMessage
def test_runVolcanoCirclePopulation(self):
"""Volcano function runs in GUI with a circular evacuation zone.
Uses population density grid as exposure."""
# NOTE: We assume radii in impact function to be 3, 5 and 10 km
myResult, myMessage = setup_scenario(
DOCK,
hazard='Merapi Alert',
exposure='People',
function='Need evacuation',
function_id='Volcano Polygon Hazard Population')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_geo_extent([110.01, -7.81, 110.78, -7.50])
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
LOGGER.debug(myResult)
myMessage = 'Result not as expected: %s' % myResult
myMemoryString = 'not have sufficient memory'
if myMemoryString in myResult:
# Test host did not have enough memory to run the test
# and user was given a nice message stating this
return
# This is the expected number of people affected
# Jarak [km] Jumlah Kumulatif
# 3 15.000 15.000
# 5 17.000 32.000
# 10 124.000 156.000
assert format_int(15000) in myResult, myMessage
assert format_int(17000) in myResult, myMessage
assert format_int(124000) in myResult, myMessage
def test_runVolcanoPopulationImpact(self):
"""Volcano function runs in GUI with a donut (merapi hazard map)
hazard data uses population density grid."""
myResult, myMessage = setup_scenario(
DOCK,
hazard='donut',
exposure='People',
function='Need evacuation',
function_id='Volcano Polygon Hazard Population')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GEOCRS, True)
set_geo_extent([110.01, -7.81, 110.78, -7.50])
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
LOGGER.debug(myResult)
myMessage = 'Result not as expected: %s' % myResult
# This is the expected number of people affected
# Kategori Jumlah Kumulatif
# Kawasan Rawan Bencana III 45.000 45.000
# Kawasan Rawan Bencana II 84.000 129.000
# Kawasan Rawan Bencana I 28.000 157.000
# We could also get a memory error here so there are
# two plausible outcomes:
# Outcome 1: we ran out of memory
if 'system does not have sufficient memory' in myResult:
return
# Outcome 2: It ran so check the results
assert format_int(45) in myResult, myMessage
assert format_int(84) in myResult, myMessage
assert format_int(28) in myResult, myMessage
def test_issue47(self):
"""Issue47: Problem when hazard & exposure data are in different
proj to viewport.
See https://github.com/AIFDR/inasafe/issues/47"""
myResult, myMessage = setup_scenario(
DOCK,
hazard='A flood in Jakarta like in 2007',
exposure='Penduduk Jakarta',
function='HKVtest',
function_id='HKVtest')
assert myResult, myMessage
# Enable on-the-fly reprojection
set_canvas_crs(GOOGLECRS, True)
set_jakarta_google_extent()
# Press RUN
DOCK.accept()
myResult = DOCK.wvResults.page_to_text()
myMessage = 'Result not as expected: %s' % myResult
assert format_int(2366) in myResult, myMessage