def generateOstiumMesh(region, options, trackSurface, centrePosition, axis1, startNodeIdentifier = 1, startElementIdentifier = 1,
vesselMeshGroups = None):
'''
:param vesselMeshGroups: List (over number of vessels) of list of mesh groups to add vessel elements to.
:return: nextNodeIdentifier, nextElementIdentifier, Ostium points tuple
(ox[n3][n1][c], od1[n3][n1][c], od2[n3][n1][c], od3[n3][n1][c], oNodeId[n3][n1], oPositions).
'''
vesselsCount = options['Number of vessels']
elementsCountAroundOstium = options['Number of elements around ostium']
elementsCountAcross = options['Number of elements across common']
elementsCountsAroundVessels, elementsCountAroundMid = getOstiumElementsCountsAroundVessels(elementsCountAroundOstium, elementsCountAcross, vesselsCount)
elementsCountAroundEnd = (elementsCountAroundOstium - 2*elementsCountAroundMid)//2
#print('\nvesselsCount', vesselsCount, 'elementsCountsAroundOstium', elementsCountAroundOstium, 'elementsCountAcross', elementsCountAcross)
#print('--> elementsCountsAroundVessels', elementsCountsAroundVessels, 'elementsCountAroundMid', elementsCountAroundMid)
elementsCountAlong = options['Number of elements along']
elementsCountThroughWall = options['Number of elements through wall']
unitScale = options['Unit scale']
isOutlet = options['Outlet']
ostiumRadius = 0.5*unitScale*options['Ostium diameter']
ostiumLength = unitScale*options['Ostium length']
ostiumWallThickness = unitScale*options['Ostium wall thickness']
interVesselHeight = unitScale*options['Ostium inter-vessel height']
interVesselDistance = unitScale*options['Ostium inter-vessel distance'] if (vesselsCount > 1) else 0.0
halfInterVesselDistance = 0.5*interVesselDistance
useCubicHermiteThroughOstiumWall = not(options['Use linear through ostium wall'])
vesselEndDerivative = ostiumLength*options['Vessel end length factor']/elementsCountAlong
vesselInnerRadius = 0.5*unitScale*options['Vessel inner diameter']
vesselWallThickness = unitScale*options['Vessel wall thickness']
vesselOuterRadius = vesselInnerRadius + vesselWallThickness
vesselAngle1Radians = math.radians(options['Vessel angle 1 degrees'])
vesselAngle1SpreadRadians = math.radians(options['Vessel angle 1 spread degrees'])
vesselAngle2Radians = math.radians(options['Vessel angle 2 degrees'])
useCubicHermiteThroughVesselWall = not(options['Use linear through vessel wall'])
useCrossDerivatives = False # options['Use cross derivatives'] # not implemented
fm = region.getFieldmodule()
fm.beginChange()
coordinates = findOrCreateFieldCoordinates(fm)
cache = fm.createFieldcache()
# track points in shape of ostium
# get directions in plane of surface at centre:
cx, cd1, cd2 = trackSurface.evaluateCoordinates(centrePosition, True)
trackDirection1, trackDirection2, centreNormal = calculate_surface_axes(cd1, cd2, axis1)
trackDirection2reverse = [ -d for d in trackDirection2 ]
halfCircumference = math.pi*ostiumRadius
circumference = 2.0*halfCircumference
distance = 0.0
elementLengthAroundOstiumMid = 0.0
vesselsSpanAll = interVesselDistance*(vesselsCount - 1)
vesselsSpanMid = interVesselDistance*(vesselsCount - 2)
if vesselsCount == 1:
elementLengthAroundOstiumEnd = circumference/elementsCountAroundOstium
vesselOstiumPositions = [ centrePosition ]
ocx = [ cx ]
ocd1 = [ trackDirection1 ]
ocd2 = [ trackDirection2 ]
ocd3 = [ centreNormal ]
else:
elementLengthAroundOstiumEnd = (circumference + 2.0*interVesselDistance)/(elementsCountAroundOstium - 2*elementsCountAroundMid)
if elementsCountAroundMid > 0:
elementLengthAroundOstiumMid = interVesselDistance*(vesselsCount - 2)/elementsCountAroundMid
vesselOstiumPositions = []
ocx = []
ocd1 = []
ocd2 = []
ocd3 = []
for v in range(vesselsCount):
vesselOstiumPositions.append(trackSurface.trackVector(centrePosition, trackDirection1, (v/(vesselsCount - 1) - 0.5)*vesselsSpanAll))
x, d1, d2 = trackSurface.evaluateCoordinates(vesselOstiumPositions[-1], -1)
d1, d2, d3 = calculate_surface_axes(d1, d2, trackDirection1)
ocx .append(x)
ocd1.append(d1)
ocd2.append(d2)
ocd3.append(d3)
# coordinates around ostium
ox = [ [], [] ]
od1 = [ [], [] ]
od2 = [ [], [] ]
od3 = [ [], [] ]
oPositions = []
for n1 in range(elementsCountAroundOstium):
elementLength = elementLengthAroundOstiumEnd
if distance <= (vesselsSpanMid + halfInterVesselDistance):
position = trackSurface.trackVector(centrePosition, trackDirection1, 0.5*vesselsSpanMid - distance)
sideDirection = trackDirection2reverse
if n1 < elementsCountAroundMid:
elementLength = elementLengthAroundOstiumMid
elif distance < (vesselsSpanMid + halfInterVesselDistance + halfCircumference):
position = vesselOstiumPositions[0]
angleRadians = (distance - (vesselsSpanMid + halfInterVesselDistance))/ostiumRadius
w1 = -math.sin(angleRadians)
w2 = -math.cos(angleRadians)
sideDirection = [ (w1*trackDirection1[c] + w2*trackDirection2[c]) for c in range(3) ]
elif distance < (2.0*vesselsSpanMid + halfInterVesselDistance + halfCircumference + interVesselDistance):
position = trackSurface.trackVector(centrePosition, trackDirection1, distance - (1.5*vesselsSpanMid + interVesselDistance + halfCircumference))
sideDirection = trackDirection2
if 0 <= (n1 - elementsCountAroundEnd - elementsCountAroundMid) < elementsCountAroundMid:
elementLength = elementLengthAroundOstiumMid
elif distance < (2.0*vesselsSpanMid + halfInterVesselDistance + circumference + interVesselDistance):
position = vesselOstiumPositions[-1]
angleRadians = (distance - (2.0*vesselsSpanMid + halfInterVesselDistance + halfCircumference + interVesselDistance))/ostiumRadius
w1 = math.sin(angleRadians)
w2 = math.cos(angleRadians)
sideDirection = [ (w1*trackDirection1[c] + w2*trackDirection2[c]) for c in range(3) ]
else:
position = trackSurface.trackVector(centrePosition, trackDirection1, 0.5*vesselsSpanMid + (circumference + 2.0*(vesselsSpanMid + interVesselDistance)) - distance)
sideDirection = trackDirection2reverse
position = trackSurface.trackVector(position, sideDirection, ostiumRadius)
oPositions.append(position)
px, d1, d2 = trackSurface.evaluateCoordinates(position, True)
pd2, pd1, pd3 = calculate_surface_axes(d1, d2, sideDirection)
# get outer coordinates
opx = px
opd1 = vector.setMagnitude([ -d for d in pd1 ], elementLengthAroundOstiumEnd)
opd2 = vector.setMagnitude(pd2, elementLengthAroundOstiumEnd) # smoothed later
opd3 = vector.setMagnitude(pd3, ostiumWallThickness)
# set inner and outer coordinates (use copy to avoid references to same list later)
ox [0].append([ (opx[c] - opd3[c]) for c in range(3) ])
od1[0].append(copy.copy(opd1))
od2[0].append(copy.copy(opd2))
ox [1].append(opx)
od1[1].append(opd1)
od2[1].append(opd2)
if useCubicHermiteThroughOstiumWall:
od3[0].append(copy.copy(opd3))
od3[1].append(opd3)
distance += elementLength
for n3 in range(2):
od1[n3] = interp.smoothCubicHermiteDerivativesLoop(ox[n3], od1[n3], fixAllDirections = True)
xx = []
xd1 = []
xd2 = []
xd3 = []
# coordinates across common ostium, between vessels
nodesCountFreeEnd = elementsCountsAroundVessels[0] + 1 - elementsCountAcross
oinc = 0 if (vesselsCount <= 2) else elementsCountAroundMid//(vesselsCount - 2)
for iv in range(vesselsCount - 1):
xx .append([ None, None ])
xd1.append([ None, None ])
xd2.append([ None, None ])
xd3.append([ None, None ])
oa = elementsCountAroundMid - iv*oinc
ob = elementsCountAroundMid + nodesCountFreeEnd - 1 + iv*oinc
nx = [ ox[1][oa], ox[1][ob] ]
nd1 = [ [ -d for d in od1[1][oa] ], od1[1][ob] ]
nd2 = [ [ -d for d in od2[1][oa] ], od2[1][ob] ]
if elementsCountAcross > 1:
# add centre point, displaced by interVesselHeight
if vesselsCount == 2:
position = centrePosition
else:
position = trackSurface.trackVector(centrePosition, trackDirection1, (iv/(vesselsCount - 2) - 0.5)*vesselsSpanMid)
mx, d1, d2 = trackSurface.evaluateCoordinates(position, derivatives = True)
md1, md2, md3 = calculate_surface_axes(d1, d2, trackDirection1)
nx .insert(1, [ (mx[c] + interVesselHeight*md3[c]) for c in range(3) ])
nd1.insert(1, vector.setMagnitude(md1, elementLengthAroundOstiumMid if (0 < iv < (vesselsCount - 2)) else elementLengthAroundOstiumEnd))
nd2.insert(1, vector.setMagnitude(md2, ostiumRadius))
nd2 = interp.smoothCubicHermiteDerivativesLine(nx, nd2, fixAllDirections = True)
px, pd2, pe, pxi = interp.sampleCubicHermiteCurves(nx, nd2, elementsCountAcross)[0:4]
pd1 = interp.interpolateSampleLinear(nd1, pe, pxi)
pd3 = [ vector.setMagnitude(vector.crossproduct3(pd1[n2], pd2[n2]), ostiumWallThickness) for n2 in range(elementsCountAcross + 1) ]
lx = [ ([ (px[n2][c] - pd3[n2][c]) for c in range(3) ]) for n2 in range(elementsCountAcross + 1) ]
ld2 = interp.smoothCubicHermiteDerivativesLine(lx, pd2, fixAllDirections = True)
xx [iv][0] = lx [1:elementsCountAcross]
xd1[iv][0] = copy.deepcopy(pd1[1:elementsCountAcross]) # to be smoothed later
xd2[iv][0] = ld2[1:elementsCountAcross]
xx [iv][1] = px [1:elementsCountAcross]
xd1[iv][1] = pd1[1:elementsCountAcross] # to be smoothed later
xd2[iv][1] = pd2[1:elementsCountAcross]
if useCubicHermiteThroughOstiumWall:
xd3[iv][0] = copy.deepcopy(pd3[1:elementsCountAcross])
xd3[iv][1] = pd3[1:elementsCountAcross]
# set smoothed d2 on ostium circumference
od2[0][oa] = [ -d for d in ld2[0] ]
od2[1][oa] = [ -d for d in pd2[0] ]
od2[0][ob] = ld2[-1]
od2[1][ob] = pd2[-1]
# get positions of vessel end centres and rings
vcx = []
vcd1 = []
vcd2 = []
vcd3 = []
vox = []
vod1 = []
vod2 = []
vod3 = []
for v in range(vesselsCount):
elementsCountAroundVessel = elementsCountsAroundVessels[v]
radiansPerElementVessel = 2.0*math.pi/elementsCountAroundVessel
useVesselAngleRadians = vesselAngle1Radians
if vesselsCount > 1:
useVesselAngleRadians += (v/(vesselsCount - 1) - 0.5)*vesselAngle1SpreadRadians
vx, vd1, vd2, vd3 = getCircleProjectionAxes(ocx[v], ocd1[v], ocd2[v], ocd3[v], ostiumLength, useVesselAngleRadians, vesselAngle2Radians)
vd1 = [ vesselOuterRadius*d for d in vd1 ]
vd2 = [ -vesselOuterRadius*d for d in vd2 ]
vd3 = [ -vesselEndDerivative*d for d in vd3 ]
vcx.append(vx)
vcd1.append(vd1)
vcd2.append(vd2)
vcd3.append(vd3)
vox.append([])
vod1.append([])
vod2.append([])
vod3.append([])
for n3 in range(2):
radius = vesselInnerRadius if (n3 == 0) else vesselOuterRadius
vAxis1 = vector.setMagnitude(vd1, radius)
vAxis2 = vector.setMagnitude(vd2, radius)
if vesselsCount == 1:
startRadians = 0.5*math.pi
else:
startRadians = 0.5*radiansPerElementVessel*elementsCountAcross
if v == (vesselsCount - 1):
startRadians -= math.pi
px, pd1 = createCirclePoints(vx, vAxis1, vAxis2, elementsCountAroundVessel, startRadians)
vox [-1].append(px)
vod1[-1].append(pd1)
vod2[-1].append([ vd3 ]*elementsCountAroundVessel)
if useCubicHermiteThroughVesselWall:
vod3[-1].append([ vector.setMagnitude(vector.crossproduct3(d1, vd3), vesselWallThickness) for d1 in pd1 ])
# calculate common ostium vessel node derivatives map
mvPointsx = [ None ]*vesselsCount
mvPointsd1 = [ None ]*vesselsCount
mvPointsd2 = [ None ]*vesselsCount
mvPointsd3 = [ None ]*vesselsCount
mvDerivativesMap = [ None ]*vesselsCount
mvMeanCount = [ None ]*vesselsCount # stores 1 if first reference to common point between vessels, 2 if second. Otherwise 0.
for v in range(vesselsCount):
if vesselsCount == 1:
mvPointsx[v], mvPointsd1[v], mvPointsd2[v], mvPointsd3[v], mvDerivativesMap[v] = \
ox, od1, od2, od3 if useCubicHermiteThroughOstiumWall else None, None
mvMeanCount[v] = [ 0 ]*elementsCountsAroundVessels[v]
else:
iv = max(0, v - 1)
oa = elementsCountAroundMid - iv*oinc
ob = elementsCountAroundMid + nodesCountFreeEnd - 1 + iv*oinc
mvPointsx [v] = []
mvPointsd1[v] = []
mvPointsd2[v] = []
mvPointsd3[v] = [] if useCubicHermiteThroughOstiumWall else None
mvDerivativesMap[v] = []
for n3 in range(2):
mvPointsd1[v].append([])
mvPointsd2[v].append([])
mvPointsx [v].append([])
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v].append([])
mvDerivativesMap[v].append([])
if v == 0: # first end vessel
mvPointsd1[v][n3] += od1[n3][oa:ob + 1]
mvPointsd2[v][n3] += od2[n3][oa:ob + 1]
mvPointsx [v][n3] += ox [n3][oa:ob + 1]
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v][n3] += od3[n3][oa:ob + 1]
mvDerivativesMap[v][n3].append( ( (0, 1, 0), (-1, 1, 0), None, (1, 0, 0) ) )
for i in range(nodesCountFreeEnd - 2):
mvDerivativesMap[v][n3].append( ( None, None, None ) )
mvDerivativesMap[v][n3].append( ( (1, 0, 0), (1, 1, 0), None, (0, -1, 0) ) )
mvPointsx [v][n3] += reversed(xx [iv][n3])
mvPointsd1[v][n3] += reversed(xd1[iv][n3])
mvPointsd2[v][n3] += reversed(xd2[iv][n3])
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v][n3] += reversed(xd3[iv][n3])
for i in range(elementsCountAcross - 1):
mvDerivativesMap[v][n3].append( ( (0, -1, 0), (1, 0, 0), None ) )
if n3 == 0:
mvMeanCount[v] = [ 1 ] + [ 0 ]*(nodesCountFreeEnd - 2) + [ 1 ]*elementsCountAcross
elif v < (vesselsCount - 1): # middle vessels
# left:
mvPointsx [v][n3] += ox [n3][oa - oinc:oa + 1]
mvPointsd1[v][n3] += od1[n3][oa - oinc:oa + 1]
mvPointsd2[v][n3] += od2[n3][oa - oinc:oa + 1]
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v][n3] += od3[n3][oa - oinc:oa + 1]
mvDerivativesMap[v][n3].append( ( (0, 1, 0), (-1, 1, 0), None, (1, 0, 0) ) )
for i in range(oinc - 1):
mvDerivativesMap[v][n3].append( ( None, None, None ) )
mvDerivativesMap[v][n3].append( ( (1, 0, 0), (1, 1, 0), None, (0, -1, 0) ) )
# across
mvPointsx [v][n3] += xx [iv][n3]
mvPointsd1[v][n3] += xd1[iv][n3]
mvPointsd2[v][n3] += xd2[iv][n3]
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v][n3] += xd3[iv][n3]
for i in range(elementsCountAcross - 1):
mvDerivativesMap[v][n3].append( ( (0, 1, 0), (-1, 0, 0), None ) )
# right
mvPointsx [v][n3] += ox [n3][ob:ob + oinc + 1]
mvPointsd1[v][n3] += od1[n3][ob:ob + oinc + 1]
mvPointsd2[v][n3] += od2[n3][ob:ob + oinc + 1]
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v][n3] += od3[n3][ob:ob + oinc + 1]
mvDerivativesMap[v][n3].append( ( (0, 1, 0), (-1, 1, 0), None, (1, 0, 0) ) )
for i in range(oinc - 1):
mvDerivativesMap[v][n3].append( ( None, None, None ) )
mvDerivativesMap[v][n3].append( ( (1, 0, 0), (1, 1, 0), None, (0, -1, 0) ) )
# across reverse
mvPointsx [v][n3] += reversed(xx [iv + 1][n3])
mvPointsd1[v][n3] += reversed(xd1[iv + 1][n3])
mvPointsd2[v][n3] += reversed(xd2[iv + 1][n3])
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v][n3] += reversed(xd3[iv + 1][n3])
for i in range(elementsCountAcross - 1):
mvDerivativesMap[v][n3].append( ( (0, -1, 0), (1, 0, 0), None ) )
if n3 == 0:
mvMeanCount[v] = [ 1 ] + [ 0 ]*(oinc - 1) + [ 2 ]*(elementsCountAcross + 1) + [ 0 ]*(oinc - 1) + [ 1 ]*elementsCountAcross
else: # last end vessel
mvPointsx [v][n3] += ox [n3][ob:] + [ ox [n3][0] ]
mvPointsd1[v][n3] += od1[n3][ob:] + [ od1[n3][0] ]
mvPointsd2[v][n3] += od2[n3][ob:] + [ od2[n3][0] ]
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v][n3] += od3[n3][ob:] + [ od3[n3][0] ]
mvDerivativesMap[v][n3].append( ( (0, 1, 0), (-1, 1, 0), None, (1, 0, 0) ) )
for i in range(nodesCountFreeEnd - 2):
mvDerivativesMap[v][n3].append( ( None, None, None ) )
mvDerivativesMap[v][n3].append( ( (1, 0, 0), (1, 1, 0), None, (0, -1, 0) ) )
mvPointsx [v][n3] += xx [iv][n3]
mvPointsd1[v][n3] += xd1[iv][n3]
mvPointsd2[v][n3] += xd2[iv][n3]
if useCubicHermiteThroughOstiumWall:
mvPointsd3[v][n3] += xd3[iv][n3]
for i in range(elementsCountAcross - 1):
mvDerivativesMap[v][n3].append( ( (0, 1, 0), (-1, 0, 0), None ) )
if n3 == 0:
mvMeanCount[v] = [ 2 ] + [ 0 ]*(nodesCountFreeEnd - 2) + [ 2 ]*elementsCountAcross
# calculate derivative 2 around free sides of inlets to fit vessel derivatives
for v in range(vesselsCount):
for n3 in range(2):
#print('v',v,'n3',n3,'elementsAround',elementsCountsAroundVessels[v])
#print('mvPointsx [v][n3]', mvPointsx [v][n3])
#print('mvPointsd1[v][n3]', mvPointsd1[v][n3])
#print('mvPointsd2[v][n3]', mvPointsd2[v][n3])
#print('mvDerivativesMap[v][n3]', mvDerivativesMap[v][n3])
for n1 in range(elementsCountsAroundVessels[v]):
d2Map = mvDerivativesMap[v][n3][n1][1] if (mvDerivativesMap[v] and mvDerivativesMap[v][n3][n1]) else None
sf1 = d2Map[0] if d2Map else 0.0
sf2 = d2Map[1] if d2Map else 1.0
nx = [ vox[v][n3][n1], mvPointsx[v][n3][n1] ]
nd2 = [ [ d*elementsCountAlong for d in vod2[v][n3][n1] ], [ (sf1*mvPointsd1[v][n3][n1][c] + sf2*mvPointsd2[v][n3][n1][c]) for c in range(3) ] ]
nd2f = interp.smoothCubicHermiteDerivativesLine(nx, nd2, fixStartDerivative = True, fixEndDirection = True)
ndf = [ d/elementsCountAlong for d in nd2f[1] ]
# assign components to set original values:
if sf1 == 0:
for c in range(3):
mvPointsd2[v][n3][n1][c] = sf2*ndf[c]
elif sf2 == 0:
if mvMeanCount[v][n1] < 2:
for c in range(3):
mvPointsd1[v][n3][n1][c] = sf1*ndf[c]
else:
# take mean of values from this and last vessel
for c in range(3):
mvPointsd1[v][n3][n1][c] = 0.5*(mvPointsd1[v][n3][n1][c] + sf1*ndf[c])
else:
#print('v', v, 'n3', n3, 'n1', n1, ':', vector.magnitude(ndf), 'vs.', vector.magnitude(nd2[1]), 'd2Map', d2Map)
pass
if isOutlet:
# reverse directions of d1 and d2 on vessels and ostium base
for c in range(3):
for n3 in range(2):
for n1 in range(elementsCountAroundOstium):
od1[n3][n1][c] = -od1[n3][n1][c]
od2[n3][n1][c] = -od2[n3][n1][c]
for iv in range(vesselsCount - 1):
for n1 in range(elementsCountAcross - 1):
xd1[iv][n3][n1][c] = -xd1[iv][n3][n1][c]
xd2[iv][n3][n1][c] = -xd2[iv][n3][n1][c]
for v in range(vesselsCount):
for n1 in range(elementsCountsAroundVessels[v]):
vod1[v][n3][n1][c] = -vod1[v][n3][n1][c]
# d2 is referenced all around, so only change once per vessel
for v in range(vesselsCount):
vod2[v][0][0][c] = -vod2[v][0][0][c]
##############
# Create nodes
##############
nodes = fm.findNodesetByFieldDomainType(Field.DOMAIN_TYPE_NODES)
nodetemplate = nodes.createNodetemplate()
nodetemplate.defineField(coordinates)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_VALUE, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS1, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS2, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS3, 1)
nodetemplateLinearS3 = nodes.createNodetemplate()
nodetemplateLinearS3.defineField(coordinates)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_VALUE, 1)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS1, 1)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS2, 1)
nodeIdentifier = startNodeIdentifier
oNodeId = []
for n3 in range(2):
oNodeId.append([])
for n1 in range(elementsCountAroundOstium):
node = nodes.createNode(nodeIdentifier, nodetemplate if useCubicHermiteThroughOstiumWall else nodetemplateLinearS3)
cache.setNode(node)
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_VALUE, 1, ox [n3][n1])
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS1, 1, od1[n3][n1])
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS2, 1, od2[n3][n1])
if useCubicHermiteThroughOstiumWall:
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS3, 1, od3[n3][n1])
oNodeId[n3].append(nodeIdentifier)
nodeIdentifier += 1
xNodeId = []
for iv in range(vesselsCount - 1):
xNodeId.append([])
for n3 in range(2):
xNodeId[iv].append([])
for n2 in range(elementsCountAcross - 1):
node = nodes.createNode(nodeIdentifier, nodetemplate if useCubicHermiteThroughOstiumWall else nodetemplateLinearS3)
cache.setNode(node)
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_VALUE, 1, xx [iv][n3][n2])
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS1, 1, xd1[iv][n3][n2])
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS2, 1, xd2[iv][n3][n2])
if useCubicHermiteThroughOstiumWall:
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS3, 1, xd3[iv][n3][n2])
xNodeId[iv][n3].append(nodeIdentifier)
nodeIdentifier += 1
#for v in range(vesselsCount):
# node = nodes.createNode(nodeIdentifier, nodetemplate)
# cache.setNode(node)
# coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_VALUE, 1, vcx [v])
# coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS1, 1, vcd1[v])
# coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS2, 1, vcd2[v])
# coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS3, 1, vcd3[v])
# nodeIdentifier += 1
# for n3 in range(2):
# for n1 in range(elementsCountsAroundVessels[v]):
# node = nodes.createNode(nodeIdentifier, nodetemplate if useCubicHermiteThroughVesselWall else nodetemplateLinearS3)
# cache.setNode(node)
# coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_VALUE, 1, vox [v][n3][n1])
# coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS1, 1, vod1[v][n3][n1])
# coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS2, 1, vod2[v][n3][n1])
# if useCubicHermiteThroughVesselWall:
# coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS3, 1, vod3[v][n3][n1])
# #vNodeId.append(nodeIdentifier)
# nodeIdentifier += 1
# get identifiers of nodes around each vessel at ostium end
mvNodeId = [ None ]*vesselsCount
for v in range(vesselsCount):
if vesselsCount == 1:
mvNodeId[v] = oNodeId
else:
iv = max(0, v - 1)
mvNodeId[v] = [ None, None ]
oa = elementsCountAroundMid - iv*oinc
ob = elementsCountAroundMid + nodesCountFreeEnd - 1 + iv*oinc
for n3 in range(2):
if v == 0: # first end vessel
mvNodeId[v][n3] = oNodeId[n3][oa:ob + 1] + (list(reversed(xNodeId[iv][n3])) if (v == 0) else xNodeId[iv][n3])
elif v == (vesselsCount - 1): # last end vessels
mvNodeId[v][n3] = oNodeId[n3][ob:] + [ oNodeId[n3][0] ] + (list(reversed(xNodeId[iv][n3])) if (v == 0) else xNodeId[iv][n3])
else: # mid vessels
mvNodeId[v][n3] = oNodeId[n3][oa - oinc:oa + 1] + xNodeId[iv][n3] + oNodeId[n3][ob:ob + oinc + 1] + list(reversed(xNodeId[iv + 1][n3]))
#################
# Create elementss
#################
mesh = fm.findMeshByDimension(3)
elementIdentifier = startElementIdentifier
tricubichermite = eftfactory_tricubichermite(mesh, useCrossDerivatives)
#tricubicHermiteBasis = fm.createElementbasis(3, Elementbasis.FUNCTION_TYPE_CUBIC_HERMITE)
#eft = tricubichermite.createEftBasic()
#elementtemplate = mesh.createElementtemplate()
#elementtemplate.setElementShapeType(Element.SHAPE_TYPE_CUBE)
#elementtemplate.defineField(coordinates, -1, eft)
#elementtemplateX = mesh.createElementtemplate()
#elementtemplateX.setElementShapeType(Element.SHAPE_TYPE_CUBE)
for v in range(vesselsCount):
if isOutlet:
startPointsx, startPointsd1, startPointsd2, startPointsd3, startNodeId, startDerivativesMap = \
mvPointsx[v], mvPointsd1[v], mvPointsd2[v], mvPointsd3[v], mvNodeId[v], mvDerivativesMap[v]
endPointsx, endPointsd1, endPointsd2, endPointsd3, endNodeId, endDerivativesMap = \
vox[v], vod1[v], vod2[v], vod3[v] if useCubicHermiteThroughVesselWall else None, None, None
# reverse order of nodes around:
for px in [ startPointsx, startPointsd1, startPointsd2, startPointsd3, startNodeId, startDerivativesMap, \
endPointsx, endPointsd1, endPointsd2, endPointsd3, endNodeId, endDerivativesMap ]:
if px:
for n3 in range(2):
px[n3] = [ px[n3][0] ] + px[n3][len(px[n3]) - 1:0:-1]
if vesselsCount > 1:
# must switch in and out xi1 maps around corners in startDerivativesMap
for n3 in range(2):
for n1 in range(elementsCountsAroundVessels[v]):
derivativesMap = startDerivativesMap[n3][n1]
if len(derivativesMap) == 4:
startDerivativesMap[n3][n1] = derivativesMap[3], derivativesMap[1], derivativesMap[2], derivativesMap[0]
else:
startPointsx, startPointsd1, startPointsd2, startPointsd3, startNodeId, startDerivativesMap = \
vox[v], vod1[v], vod2[v], vod3[v] if useCubicHermiteThroughVesselWall else None, None, None
endPointsx, endPointsd1, endPointsd2, endPointsd3, endNodeId, endDerivativesMap = \
mvPointsx[v], mvPointsd1[v], mvPointsd2[v], mvPointsd3[v], mvNodeId[v], mvDerivativesMap[v]
#print('endPointsx ', endPointsx )
#print('endPointsd1', endPointsd1)
#print('endPointsd2', endPointsd2)
#print('endPointsd3', endPointsd3)
#print('endNodeId', endNodeId)
#print('endDerivativesMap', endDerivativesMap)
nodeIdentifier, elementIdentifier = createAnnulusMesh3d(
nodes, mesh, nodeIdentifier, elementIdentifier,
startPointsx, startPointsd1, startPointsd2, startPointsd3, startNodeId, startDerivativesMap,
endPointsx, endPointsd1, endPointsd2, endPointsd3, endNodeId, endDerivativesMap,
forceMidLinearXi3 = not useCubicHermiteThroughVesselWall,
elementsCountRadial = elementsCountAlong,
meshGroups = vesselMeshGroups[v] if vesselMeshGroups else [])
fm.endChange()
return nodeIdentifier, elementIdentifier, (ox, od1, od2, od3, oNodeId, oPositions)
def createAnnulusMesh3d(nodes,
mesh,
nextNodeIdentifier,
nextElementIdentifier,
startPointsx,
startPointsd1,
startPointsd2,
startPointsd3,
startNodeId,
startDerivativesMap,
endPointsx,
endPointsd1,
endPointsd2,
endPointsd3,
endNodeId,
endDerivativesMap,
forceStartLinearXi3=False,
forceMidLinearXi3=False,
forceEndLinearXi3=False,
maxStartThickness=None,
maxEndThickness=None,
useCrossDerivatives=False,
elementsCountRadial=1,
meshGroups=None,
wallAnnotationGroups=None,
tracksurface=None,
startProportions=None,
endProportions=None,
rescaleStartDerivatives=False,
rescaleEndDerivatives=False,
sampleBlend=0.0):
"""
Create an annulus mesh from a loop of start points/nodes with specified derivative mappings to
a loop of end points/nodes with specified derivative mappings.
Derivative d3 is through the wall. Currently limited to single element layer through wall.
Points/nodes order cycles fastest around the annulus, then through the wall.
Note doesn't support cross derivatives.
Arrays are indexed by n3 (node through wall, size 2), n2 (node along/radial), n1 (node around, variable size)
and coordinate component c.
:param nodes: The nodeset to create nodes in.
:param mesh: The mesh to create elements in.
:param nextNodeIdentifier, nextElementIdentifier: Next identifiers to use and increment.
:param startPointsx, startPointsd1, startPointsd2, startPointsd3, endPointsx, endPointsd1, endPointsd2, endPointsd3:
List array[n3][n1][c] or start/point coordinates and derivatives. To linearise through the wall, pass None to
d3. If both ends are linear through the wall, interior points are linear through the wall.
:param startNodeId, endNodeId: List array [n3][n1] of existing node identifiers to use at start/end. Pass None for
argument if no nodes are specified at end. These arguments are 'all or nothing'.
:param startDerivativesMap, endDerivativesMap: List array[n3][n1] of mappings for d/dxi1, d/dxi2, d/dxi3 at
start/end of form:
( (1, -1, 0), (1, 0, 0), None ) where the first tuple means d/dxi1 = d/ds1 - d/ds2. Only 0, 1 and -1 may be
used.
None means use default e.g. d/dxi2 = d/ds2.
Pass None for the entire argument to use the defaults d/dxi1 = d/ds1, d/dxi2 = d/ds2, d/dxi3 = d/ds3.
Pass a 4th mapping to apply to d/dxi1 on other side of node; if not supplied first mapping applies both sides.
:param forceStartLinearXi3, forceMidLinearXi3, forceEndLinearXi3: Force start, middle or
end elements to be linear through the wall, even if d3 is supplied at either end.
Can only use forceMidLinearXi3 only if at least one end is linear in d3.
:param maxStartThickness, maxEndThickness: Optional maximum override on start/end thicknesses.
:param useCrossDerivatives: May only be True if no derivatives maps are in use.
:param elementsCountRadial: Optional number of elements in radial direction between start and end.
:param meshGroups: Optional sequence of Zinc MeshGroup for adding all new elements to, or a sequence of
length elementsCountRadial containing sequences of mesh groups to add rows of radial elements to
from start to end.
:param wallAnnotationGroups: Annotation groups for adding all new elements to a sequence
of groups to add to elements through wall.
:param tracksurface: Description for outer surface representation used for creating annulus mesh. Provides
information for creating radial nodes on annulus that sit on tracksurface. Need startProportions and endProportions
to work.
:param startProportions: Proportion around and along of startPoints on tracksurface. These vary with nodes
around as for startPoints. Values only given for tracksurface for outer layer (xi3 == 1).
:param endProportions: Proportion around and along of endPoints on track surface. These vary with nodes
around as for endPoints. Values only given for tracksurface for outer layer (xi3 == 1).
:param rescaleStartDerivatives, rescaleEndDerivatives: Optional flags to compute and multiply additional scale
factors on start, end or both radial derivatives to fit arc length, needed if derivatives are of the wrong scale
for the radial distances and the chosen elementsCountRadial. If either is True, derivatives and sampled radial
nodes are spaced for a gradual change of derivative from that at the other end. If both are True, scaling is set to
give even sampling and arclength derivatives.
:param sampleBlend: Real value varying from 0.0 to 1.0 controlling weighting of start and end
derivatives when interpolating extra points in-between, where 0.0 = sample with equal end derivatives,
and 1.0 = proportional to current magnitudes, interpolated in between.
:return: Final values of nextNodeIdentifier, nextElementIdentifier
"""
assert (elementsCountRadial >=
1), 'createAnnulusMesh3d: Invalid number of radial elements'
startLinearXi3 = (not startPointsd3) or forceStartLinearXi3
endLinearXi3 = (not endPointsd3) or forceEndLinearXi3
midLinearXi3 = (startLinearXi3 and endLinearXi3) or (
(startLinearXi3 or endLinearXi3) and forceMidLinearXi3)
# get list whether each row of nodes in elements is linear in Xi3
# this is for element use; start/end nodes may have d3 even if element is linear
rowLinearXi3 = [
startLinearXi3
] + [midLinearXi3] * (elementsCountRadial - 1) + [endLinearXi3]
assert (not useCrossDerivatives) or ((not startDerivativesMap) and (not endDerivativesMap)), \
'createAnnulusMesh3d: Cannot use cross derivatives with derivatives map'
nodesCountWall = len(startPointsx)
assert (len(startPointsd1) == nodesCountWall) and (len(startPointsd2) == nodesCountWall) and \
(startLinearXi3 or (len(startPointsd3) == nodesCountWall)) and \
(len(endPointsx) == nodesCountWall) and (len(endPointsd1) == nodesCountWall) and \
(len(endPointsd2) == nodesCountWall) and (endLinearXi3 or (len(endPointsd3) == nodesCountWall)) and \
((startNodeId is None) or (len(startNodeId) == nodesCountWall)) and \
((endNodeId is None) or (len(endNodeId) == nodesCountWall)) and \
((startDerivativesMap is None) or (len(startDerivativesMap) == nodesCountWall)) and \
((endDerivativesMap is None) or (len(endDerivativesMap) == nodesCountWall)),\
'createAnnulusMesh3d: Mismatch in number of layers through wall'
elementsCountAround = nodesCountAround = len(startPointsx[0])
assert (
nodesCountAround > 1
), 'createAnnulusMesh3d: Invalid number of points/nodes around annulus'
for n3 in range(nodesCountWall):
assert (len(startPointsx[n3]) == nodesCountAround) and (len(startPointsd1[n3]) == nodesCountAround) and \
(len(startPointsd2[n3]) == nodesCountAround) and \
(startLinearXi3 or (len(startPointsd3[n3]) == nodesCountAround)) and\
(len(endPointsx[n3]) == nodesCountAround) and (len(endPointsd1[n3]) == nodesCountAround) and \
(len(endPointsd2[n3]) == nodesCountAround) and \
(endLinearXi3 or (len(endPointsd3[n3]) == nodesCountAround)) and \
((startNodeId is None) or (len(startNodeId[n3]) == nodesCountAround)) and\
((endNodeId is None) or (len(endNodeId[n3]) == nodesCountAround)) and \
((startDerivativesMap is None) or (len(startDerivativesMap[n3]) == nodesCountAround)) and \
((endDerivativesMap is None) or (len(endDerivativesMap[n3]) == nodesCountAround)), \
'createAnnulusMesh3d: Mismatch in number of points/nodes in layers through wall'
rowMeshGroups = meshGroups
if meshGroups:
assert isinstance(
meshGroups,
Sequence), 'createAnnulusMesh3d: Mesh groups is not a sequence'
if (len(meshGroups) == 0) or (not isinstance(meshGroups[0], Sequence)):
rowMeshGroups = [meshGroups] * elementsCountRadial
else:
assert len(meshGroups) == elementsCountRadial, \
'createAnnulusMesh3d: Length of meshGroups sequence does not equal elementsCountRadial'
if wallAnnotationGroups:
assert len(wallAnnotationGroups) == nodesCountWall - 1, \
'createAnnulusMesh3d: Length of wallAnnotationGroups sequence does not equal elementsCountThroughWall'
if tracksurface:
assert startProportions and endProportions, \
'createAnnulusMesh3d: Missing start and/or end proportions for use with tracksurface'
assert len(startProportions) == nodesCountAround, \
'createAnnulusMesh3d: Length of startProportions does not equal nodesCountAround'
assert len(endProportions) == nodesCountAround, \
'createAnnulusMesh3d: Length of endProportions does not equal nodesCountAround'
fm = mesh.getFieldmodule()
fm.beginChange()
cache = fm.createFieldcache()
coordinates = findOrCreateFieldCoordinates(fm)
# Build arrays of points from start to end
px = [[] for n3 in range(nodesCountWall)]
pd1 = [[] for n3 in range(nodesCountWall)]
pd2 = [[] for n3 in range(nodesCountWall)]
pd3 = [[] for n3 in range(nodesCountWall)]
# Find total wall thickness
thicknessProportions = []
thicknesses = []
thicknesses.append([
vector.magnitude([
(startPointsx[nodesCountWall - 1][n1][c] - startPointsx[0][n1][c])
for c in range(3)
]) for n1 in range(nodesCountAround)
])
for n2 in range(1, elementsCountRadial):
thicknesses.append([None] * nodesCountAround)
thicknesses.append([
vector.magnitude([
(endPointsx[nodesCountWall - 1][n1][c] - endPointsx[0][n1][c])
for c in range(3)
]) for n1 in range(nodesCountAround)
])
for n3 in range(nodesCountWall):
px[n3] = [startPointsx[n3], endPointsx[n3]]
pd1[n3] = [startPointsd1[n3], endPointsd1[n3]]
pd2[n3] = [startPointsd2[n3], endPointsd2[n3]]
pd3[n3] = [
startPointsd3[n3] if (startPointsd3 is not None) else None,
endPointsd3[n3] if (endPointsd3 is not None) else None
]
startThicknessList = \
[vector.magnitude([(startPointsx[n3][n1][c] - startPointsx[n3 - (1 if n3 > 0 else 0)][n1][c])
for c in range(3)]) for n1 in range(len(startPointsx[n3]))]
endThicknessList = \
[vector.magnitude([(endPointsx[n3][n1][c] - endPointsx[n3 - (1 if n3 > 0 else 0)][n1][c])
for c in range(3)]) for n1 in range(len(endPointsx[n3]))]
thicknessList = [startThicknessList,
endThicknessList] # thickness of each layer
startThicknessProportions = [
thicknessList[0][c] / thicknesses[0][c]
for c in range(nodesCountAround)
]
endThicknessProportions = [
thicknessList[1][c] / thicknesses[-1][c]
for c in range(nodesCountAround)
]
thicknessProportions.append(
[startThicknessProportions, endThicknessProportions])
if rescaleStartDerivatives:
scaleFactorMapStart = [[] for n3 in range(nodesCountWall)]
if rescaleEndDerivatives:
scaleFactorMapEnd = [[] for n3 in range(nodesCountWall)]
# following code adds in-between points, but also handles rescaling for 1 radial element
for n3 in range(nodesCountWall):
for n2 in range(1, elementsCountRadial):
px[n3].insert(n2, [None] * nodesCountAround)
pd1[n3].insert(n2, [None] * nodesCountAround)
pd2[n3].insert(n2, [None] * nodesCountAround)
pd3[n3].insert(n2,
None if midLinearXi3 else [None] * nodesCountAround)
thicknessProportions[n3].insert(n2, [None] * nodesCountAround)
if maxStartThickness:
for n1 in range(nodesCountAround):
thicknesses[0][n1] = min(thicknesses[0][n1], maxStartThickness)
if maxEndThickness:
for n1 in range(nodesCountAround):
thicknesses[-1][n1] = min(thicknesses[-1][n1], maxEndThickness)
n3 = nodesCountWall - 1
for n1 in range(nodesCountAround):
ax = startPointsx[n3][n1]
ad1, ad2 = getMappedD1D2(
[startPointsd1[n3][n1], startPointsd2[n3][n1]] +
([startPointsd3[n3][n1]] if startPointsd3 else []),
startDerivativesMap[n3][n1] if startDerivativesMap else None)
bx = endPointsx[n3][n1]
bd1, bd2 = getMappedD1D2(
[endPointsd1[n3][n1], endPointsd2[n3][n1]] +
([endPointsd3[n3][n1]] if endPointsd3 else []),
endDerivativesMap[n3][n1] if endDerivativesMap else None)
# sample between start and end points and derivatives
# scaling end derivatives to arc length gives even curvature along the curve
aMag = vector.magnitude(ad2)
bMag = vector.magnitude(bd2)
ad2Scaled = vector.setMagnitude(
ad2,
0.5 * ((1.0 + sampleBlend) * aMag + (1.0 - sampleBlend) * bMag))
bd2Scaled = vector.setMagnitude(
bd2,
0.5 * ((1.0 + sampleBlend) * bMag + (1.0 - sampleBlend) * aMag))
scaling = interp.computeCubicHermiteDerivativeScaling(
ax, ad2Scaled, bx, bd2Scaled)
ad2Scaled = [d * scaling for d in ad2Scaled]
bd2Scaled = [d * scaling for d in bd2Scaled]
derivativeMagnitudeStart = None if rescaleStartDerivatives else vector.magnitude(
ad2)
derivativeMagnitudeEnd = None if rescaleEndDerivatives else vector.magnitude(
bd2)
if tracksurface:
mx, md2, md1, md3, mProportions = \
tracksurface.createHermiteCurvePoints(startProportions[n1][0], startProportions[n1][1],
endProportions[n1][0], endProportions[n1][1], elementsCountRadial,
derivativeStart=[d / elementsCountRadial for d in ad2Scaled],
derivativeEnd=[d / elementsCountRadial for d in bd2Scaled])
mx, md2, md1 = \
tracksurface.resampleHermiteCurvePointsSmooth(mx, md2, md1, md3, mProportions,
derivativeMagnitudeStart, derivativeMagnitudeEnd)[0:3]
# interpolate thicknesses using xi calculated from radial arclength distances to points
arcLengthInsideToRadialPoint = \
[0.0] + [interp.getCubicHermiteArcLength(mx[n2], md2[n2], mx[n2 + 1], md2[n2 + 1])
for n2 in range(elementsCountRadial)]
arclengthInsideToOutside = sum(arcLengthInsideToRadialPoint)
thi = []
for n2 in range(elementsCountRadial + 1):
xi2 = arcLengthInsideToRadialPoint[
n2 - 1] / arclengthInsideToOutside
thi.append(thicknesses[-1][n1] * xi2 + thicknesses[0][n1] *
(1.0 - xi2))
thiProportion = []
for m3 in range(nodesCountWall):
thiProportionRadial = []
for n2 in range(elementsCountRadial + 1):
xi2 = arcLengthInsideToRadialPoint[
n2 - 1] / arclengthInsideToOutside
thiProportionRadial.append(
thicknessProportions[m3][-1][n1] * xi2 +
thicknessProportions[m3][0][n1] * (1.0 - xi2))
thiProportion.append(thiProportionRadial)
else:
mx, md2, me, mxi = interp.sampleCubicHermiteCurvesSmooth(
[ax, bx], [ad2Scaled, bd2Scaled], elementsCountRadial,
derivativeMagnitudeStart, derivativeMagnitudeEnd)[0:4]
md1 = interp.interpolateSampleLinear([ad1, bd1], me, mxi)
thi = interp.interpolateSampleLinear(
[thicknesses[0][n1], thicknesses[-1][n1]], me, mxi)
thiProportion = []
for m3 in range(nodesCountWall):
thiProportion.append(
interp.interpolateSampleLinear([
thicknessProportions[m3][0][n1],
thicknessProportions[m3][-1][n1]
], me, mxi))
# set scalefactors if rescaling, make same on inside for now
if rescaleStartDerivatives:
scaleFactor = vector.magnitude(md2[0]) / vector.magnitude(ad2)
scaleFactorMapStart[n3].append(scaleFactor)
if rescaleEndDerivatives:
scaleFactor = vector.magnitude(md2[-1]) / vector.magnitude(bd2)
scaleFactorMapEnd[n3].append(scaleFactor)
for n2 in range(1, elementsCountRadial):
px[n3][n2][n1] = mx[n2]
pd1[n3][n2][n1] = md1[n2]
pd2[n3][n2][n1] = md2[n2]
thicknesses[n2][n1] = thi[n2]
for m3 in range(nodesCountWall):
thicknessProportions[m3][n2][n1] = thiProportion[m3][n2]
xi3List = [[[[] for n1 in range(nodesCountAround)]
for n2 in range(elementsCountRadial + 1)]
for n3 in range(nodesCountWall)]
for n1 in range(nodesCountAround):
for n2 in range(elementsCountRadial + 1):
xi3 = 0.0
for n3 in range(nodesCountWall):
xi3 += thicknessProportions[n3][n2][n1]
xi3List[n3][n2][n1] = xi3
# now get inner positions from normal and thickness, derivatives from curvature
for n2 in range(1, elementsCountRadial):
# first smooth derivative 1 around outer loop
pd1[-1][n2] = \
interp.smoothCubicHermiteDerivativesLoop(px[-1][n2], pd1[-1][n2],
magnitudeScalingMode=interp.DerivativeScalingMode.HARMONIC_MEAN)
for n3 in range(0, nodesCountWall - 1):
for n1 in range(nodesCountAround):
xi3 = 1 - xi3List[n3][n2][n1]
normal = vector.normalise(
vector.crossproduct3(pd1[-1][n2][n1], pd2[-1][n2][n1]))
thickness = thicknesses[n2][n1] * xi3
d3 = [d * thickness for d in normal]
px[n3][n2][n1] = [(px[-1][n2][n1][c] - d3[c])
for c in range(3)]
# calculate inner d1 from curvature around
n1m = n1 - 1
n1p = (n1 + 1) % nodesCountAround
curvature = 0.5 * (interp.getCubicHermiteCurvature(
px[-1][n2][n1m], pd1[-1][n2][n1m], px[-1][n2][n1], pd1[-1]
[n2][n1], normal, 1.0) + interp.getCubicHermiteCurvature(
px[-1][n2][n1], pd1[-1][n2][n1], px[-1][n2][n1p],
pd1[-1][n2][n1p], normal, 0.0))
factor = 1.0 + curvature * thickness
pd1[n3][n2][n1] = [factor * d for d in pd1[-1][n2][n1]]
# calculate inner d2 from curvature radially
n2m = n2 - 1
n2p = n2 + 1
curvature = 0.5 * (interp.getCubicHermiteCurvature(
px[-1][n2m][n1], pd2[-1][n2m][n1], px[-1][n2][n1], pd2[-1]
[n2][n1], normal, 1.0) + interp.getCubicHermiteCurvature(
px[-1][n2][n1], pd2[-1][n2][n1], px[-1][n2p][n1],
pd2[-1][n2p][n1], normal, 0.0))
factor = 1.0 + curvature * thickness
pd2[n3][n2][n1] = [factor * d for d in pd2[-1][n2][n1]]
d2Scaled = [factor * d for d in pd2[-1][n2][n1]]
if vector.dotproduct(vector.normalise(pd2[-1][n2][n1]),
vector.normalise(d2Scaled)) == -1:
pd2[n3][n2][n1] = [-factor * d for d in pd2[-1][n2][n1]]
if not midLinearXi3:
pd3[n3][n2][n1] = pd3[-1][n2][n1] = \
[d * thicknesses[n2][n1] * thicknessProportions[n3 + 1][n2][n1] for d in normal]
# smooth derivative 1 around inner loop
pd1[n3][n2] = interp.smoothCubicHermiteDerivativesLoop(
px[n3][n2],
pd1[n3][n2],
magnitudeScalingMode=interp.DerivativeScalingMode.HARMONIC_MEAN
)
for n3 in range(0, nodesCountWall):
# smooth derivative 2 radially/along annulus
for n1 in range(nodesCountAround):
mx = [px[n3][n2][n1] for n2 in range(elementsCountRadial + 1)]
md2 = [pd2[n3][n2][n1] for n2 in range(elementsCountRadial + 1)]
# replace mapped start/end d2
md2[0] = getMappedD1D2(
[startPointsd1[n3][n1], startPointsd2[n3][n1]] +
([startPointsd3[n3][n1]] if startPointsd3 else []),
startDerivativesMap[n3][n1]
if startDerivativesMap else None)[1]
md2[-1] = getMappedD1D2(
[endPointsd1[n3][n1], endPointsd2[n3][n1]] +
([endPointsd3[n3][n1]] if endPointsd3 else []),
endDerivativesMap[n3][n1] if endDerivativesMap else None)[1]
sd2 = interp.smoothCubicHermiteDerivativesLine(
mx,
md2,
fixAllDirections=True,
fixStartDerivative=not rescaleStartDerivatives,
fixStartDirection=rescaleStartDerivatives,
fixEndDerivative=not rescaleEndDerivatives,
fixEndDirection=rescaleEndDerivatives,
magnitudeScalingMode=interp.DerivativeScalingMode.HARMONIC_MEAN
)
if rescaleStartDerivatives:
scaleFactor = vector.magnitude(sd2[0]) / vector.magnitude(
md2[0])
scaleFactorMapStart[n3].append(scaleFactor)
if rescaleEndDerivatives:
scaleFactor = vector.magnitude(sd2[-1]) / vector.magnitude(
md2[-1])
scaleFactorMapEnd[n3].append(scaleFactor)
for n2 in range(1, elementsCountRadial):
pd2[n3][n2][n1] = sd2[n2]
##############
# Create nodes
##############
nodetemplate = nodes.createNodetemplate()
nodetemplate.defineField(coordinates)
nodetemplate.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_VALUE, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D_DS1, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D_DS2, 1)
if useCrossDerivatives:
nodetemplate.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D2_DS1DS2, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D_DS3, 1)
if useCrossDerivatives:
nodetemplate.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D2_DS1DS3, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D2_DS2DS3, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D3_DS1DS2DS3, 1)
nodetemplateLinearS3 = nodes.createNodetemplate()
nodetemplateLinearS3.defineField(coordinates)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_VALUE, 1)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D_DS1, 1)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1,
Node.VALUE_LABEL_D_DS2, 1)
if useCrossDerivatives:
nodetemplateLinearS3.setValueNumberOfVersions(
coordinates, -1, Node.VALUE_LABEL_D2_DS1DS2, 1)
nodeIdentifier = nextNodeIdentifier
nodeId = [[] for n3 in range(nodesCountWall)]
for n2 in range(elementsCountRadial + 1):
for n3 in range(nodesCountWall):
if (n2 == 0) and (startNodeId is not None):
rowNodeId = copy.deepcopy(startNodeId[n3])
elif (n2 == elementsCountRadial) and (endNodeId is not None):
rowNodeId = copy.deepcopy(endNodeId[n3])
else:
rowNodeId = []
nodetemplate1 = nodetemplate if pd3[n3][
n2] else nodetemplateLinearS3
for n1 in range(nodesCountAround):
node = nodes.createNode(nodeIdentifier, nodetemplate1)
rowNodeId.append(nodeIdentifier)
cache.setNode(node)
coordinates.setNodeParameters(cache, -1,
Node.VALUE_LABEL_VALUE, 1,
px[n3][n2][n1])
coordinates.setNodeParameters(cache, -1,
Node.VALUE_LABEL_D_DS1, 1,
pd1[n3][n2][n1])
coordinates.setNodeParameters(cache, -1,
Node.VALUE_LABEL_D_DS2, 1,
pd2[n3][n2][n1])
if pd3[n3][n2]:
coordinates.setNodeParameters(cache, -1,
Node.VALUE_LABEL_D_DS3,
1, pd3[n3][n2][n1])
nodeIdentifier = nodeIdentifier + 1
nodeId[n3].append(rowNodeId)
#################
# Create elements
#################
tricubichermite = eftfactory_tricubichermite(mesh, useCrossDerivatives)
bicubichermitelinear = eftfactory_bicubichermitelinear(
mesh, useCrossDerivatives)
elementIdentifier = nextElementIdentifier
elementtemplateStandard = mesh.createElementtemplate()
elementtemplateStandard.setElementShapeType(Element.SHAPE_TYPE_CUBE)
elementtemplateX = mesh.createElementtemplate()
elementtemplateX.setElementShapeType(Element.SHAPE_TYPE_CUBE)
elementsCountWall = nodesCountWall - 1
for e2 in range(elementsCountRadial):
nonlinearXi3 = (not rowLinearXi3[e2]) or (not rowLinearXi3[e2 + 1])
eftFactory = tricubichermite if nonlinearXi3 else bicubichermitelinear
eftStandard = eftFactory.createEftBasic()
elementtemplateStandard.defineField(coordinates, -1, eftStandard)
mapStartDerivatives = (e2 == 0) and (startDerivativesMap
or rescaleStartDerivatives)
mapStartLinearDerivativeXi3 = nonlinearXi3 and rowLinearXi3[e2]
mapEndDerivatives = (e2 == (elementsCountRadial - 1)) and (
endDerivativesMap or rescaleEndDerivatives)
mapEndLinearDerivativeXi3 = nonlinearXi3 and rowLinearXi3[e2 + 1]
mapDerivatives = mapStartDerivatives or mapStartLinearDerivativeXi3 or \
mapEndDerivatives or mapEndLinearDerivativeXi3
for e3 in range(elementsCountWall):
for e1 in range(elementsCountAround):
en = (e1 + 1) % elementsCountAround
nids = [
nodeId[e3][e2][e1], nodeId[e3][e2][en],
nodeId[e3][e2 + 1][e1], nodeId[e3][e2 + 1][en],
nodeId[e3 + 1][e2][e1], nodeId[e3 + 1][e2][en],
nodeId[e3 + 1][e2 + 1][e1], nodeId[e3 + 1][e2 + 1][en]
]
scaleFactors = []
if mapDerivatives:
eft1 = eftFactory.createEftNoCrossDerivatives()
# work out if scaling by global -1
scaleMinus1 = mapStartLinearDerivativeXi3 or mapEndLinearDerivativeXi3
if (not scaleMinus1
) and mapStartDerivatives and startDerivativesMap:
for n3 in range(2):
n3Idx = n3 + e3
# need to handle 3 or 4 maps (e1 uses last 3, en uses first 3)
for map in startDerivativesMap[n3Idx][e1][-3:]:
if map and (-1 in map):
scaleMinus1 = True
break
for map in startDerivativesMap[n3Idx][en][:3]:
if map and (-1 in map):
scaleMinus1 = True
break
if (not scaleMinus1
) and mapEndDerivatives and endDerivativesMap:
for n3 in range(2):
n3Idx = n3 + e3
# need to handle 3 or 4 maps (e1 uses last 3, en uses first 3)
for map in endDerivativesMap[n3Idx][e1][-3:]:
if map and (-1 in map):
scaleMinus1 = True
break
for map in endDerivativesMap[n3Idx][en][:3]:
if map and (-1 in map):
scaleMinus1 = True
break
# make node scale factors vary fastest by local node varying across lower xi
nodeScaleFactorIds = []
for n3 in range(2):
n3Idx = n3 + e3
if mapStartDerivatives and rescaleStartDerivatives:
for i in range(2):
derivativesMap = (
startDerivativesMap[n3Idx][e1][1] if
(i == 0) else startDerivativesMap[n3Idx]
[en][1]) if startDerivativesMap else None
nodeScaleFactorIds.append(
getQuadrantID(derivativesMap
if derivativesMap else (0, 1,
0)))
if mapEndDerivatives and rescaleEndDerivatives:
for i in range(2):
derivativesMap = (
endDerivativesMap[n3Idx][e1][1] if
(i == 0) else endDerivativesMap[n3Idx][en]
[1]) if endDerivativesMap else None
nodeScaleFactorIds.append(
getQuadrantID(derivativesMap
if derivativesMap else (0, 1,
0)))
setEftScaleFactorIds(eft1, [1] if scaleMinus1 else [],
nodeScaleFactorIds)
firstNodeScaleFactorIndex = 2 if scaleMinus1 else 1
firstStartNodeScaleFactorIndex = \
firstNodeScaleFactorIndex if (mapStartDerivatives and rescaleStartDerivatives) else None
firstEndNodeScaleFactorIndex = \
(firstNodeScaleFactorIndex + (2 if firstStartNodeScaleFactorIndex else 0)) \
if (mapEndDerivatives and rescaleEndDerivatives) else None
layerNodeScaleFactorIndexOffset = \
4 if (firstStartNodeScaleFactorIndex and firstEndNodeScaleFactorIndex) else 2
if scaleMinus1:
scaleFactors.append(-1.0)
for n3 in range(2):
n3Idx = n3 + e3
if firstStartNodeScaleFactorIndex:
scaleFactors.append(scaleFactorMapStart[n3Idx][e1])
scaleFactors.append(scaleFactorMapStart[n3Idx][en])
if firstEndNodeScaleFactorIndex:
scaleFactors.append(scaleFactorMapEnd[n3Idx][e1])
scaleFactors.append(scaleFactorMapEnd[n3Idx][en])
if mapStartLinearDerivativeXi3:
eftFactory.setEftLinearDerivative2(
eft1, [1, 5, 2, 6], Node.VALUE_LABEL_D_DS3,
[Node.VALUE_LABEL_D2_DS1DS3])
if mapStartDerivatives:
for i in range(2):
lns = [1, 5] if (i == 0) else [2, 6]
for n3 in range(2):
n3Idx = n3 + e3
derivativesMap = \
(startDerivativesMap[n3Idx][e1] if (i == 0) else startDerivativesMap[n3Idx][en]) \
if startDerivativesMap else (None, None, None)
# handle different d1 on each side of node
d1Map = \
derivativesMap[0] if ((i == 1) or (len(derivativesMap) < 4)) else derivativesMap[3]
d2Map = derivativesMap[1] if derivativesMap[
1] else (0, 1, 0)
d3Map = derivativesMap[2]
# use temporary to safely swap DS1 and DS2:
ln = [lns[n3]]
if d1Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D_DS1,
[(Node.VALUE_LABEL_D2_DS1DS2, [])])
if d3Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D_DS3,
[(Node.VALUE_LABEL_D2_DS2DS3, [])])
if d2Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D_DS2,
derivativeSignsToExpressionTerms(
(Node.VALUE_LABEL_D_DS1,
Node.VALUE_LABEL_D_DS2,
Node.VALUE_LABEL_D_DS3), d2Map,
(firstStartNodeScaleFactorIndex +
i + n3 *
layerNodeScaleFactorIndexOffset)
if rescaleStartDerivatives else
None))
if d1Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D2_DS1DS2,
derivativeSignsToExpressionTerms(
(Node.VALUE_LABEL_D_DS1,
Node.VALUE_LABEL_D_DS2,
Node.VALUE_LABEL_D_DS3), d1Map))
if d3Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D2_DS2DS3,
derivativeSignsToExpressionTerms(
(Node.VALUE_LABEL_D_DS1,
Node.VALUE_LABEL_D_DS2,
Node.VALUE_LABEL_D_DS3), d3Map))
if mapEndLinearDerivativeXi3:
eftFactory.setEftLinearDerivative2(
eft1, [3, 7, 4, 8], Node.VALUE_LABEL_D_DS3,
[Node.VALUE_LABEL_D2_DS1DS3])
if mapEndDerivatives:
for i in range(2):
lns = [3, 7] if (i == 0) else [4, 8]
for n3 in range(2):
n3Idx = n3 + e3
derivativesMap = \
(endDerivativesMap[n3Idx][e1] if (i == 0) else endDerivativesMap[n3Idx][en]) \
if endDerivativesMap else (None, None, None)
# handle different d1 on each side of node
d1Map = derivativesMap[0] if ((i == 1) or (len(derivativesMap) < 4)) else \
derivativesMap[3]
d2Map = derivativesMap[1] if derivativesMap[
1] else (0, 1, 0)
d3Map = derivativesMap[2]
# use temporary to safely swap DS1 and DS2:
ln = [lns[n3]]
if d1Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D_DS1,
[(Node.VALUE_LABEL_D2_DS1DS2, [])])
if d3Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D_DS3,
[(Node.VALUE_LABEL_D2_DS2DS3, [])])
if d2Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D_DS2,
derivativeSignsToExpressionTerms(
(Node.VALUE_LABEL_D_DS1,
Node.VALUE_LABEL_D_DS2,
Node.VALUE_LABEL_D_DS3), d2Map,
(firstEndNodeScaleFactorIndex + i +
n3 *
layerNodeScaleFactorIndexOffset)
if rescaleEndDerivatives else
None))
if d1Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D2_DS1DS2,
derivativeSignsToExpressionTerms(
(Node.VALUE_LABEL_D_DS1,
Node.VALUE_LABEL_D_DS2,
Node.VALUE_LABEL_D_DS3), d1Map))
if d3Map:
remapEftNodeValueLabel(
eft1, ln, Node.VALUE_LABEL_D2_DS2DS3,
derivativeSignsToExpressionTerms(
(Node.VALUE_LABEL_D_DS1,
Node.VALUE_LABEL_D_DS2,
Node.VALUE_LABEL_D_DS3), d3Map))
elementtemplateX.defineField(coordinates, -1, eft1)
elementtemplate1 = elementtemplateX
else:
eft1 = eftStandard
elementtemplate1 = elementtemplateStandard
element = mesh.createElement(elementIdentifier,
elementtemplate1)
result2 = element.setNodesByIdentifier(eft1, nids)
if scaleFactors:
result3 = element.setScaleFactors(eft1, scaleFactors)
# print('create element annulus', element.isValid(), elementIdentifier, eft1.validate(),
# result2, result3 if scaleFactors else None, nids)
elementIdentifier += 1
if rowMeshGroups:
for meshGroup in rowMeshGroups[e2]:
meshGroup.addElement(element)
if wallAnnotationGroups:
for annotationGroup in wallAnnotationGroups[e3]:
meshGroup = annotationGroup.getMeshGroup(mesh)
meshGroup.addElement(element)
fm.endChange()
return nodeIdentifier, elementIdentifier
def createAnnulusMesh3d(nodes, mesh, nextNodeIdentifier, nextElementIdentifier,
startPointsx, startPointsd1, startPointsd2, startPointsd3, startNodeId, startDerivativesMap,
endPointsx, endPointsd1, endPointsd2, endPointsd3, endNodeId, endDerivativesMap,
forceStartLinearXi3 = False, forceMidLinearXi3 = False, forceEndLinearXi3 = False,
maxStartThickness = None, maxEndThickness = None, useCrossDerivatives = False,
elementsCountRadial = 1, meshGroups = []):
'''
Create an annulus mesh from a loop of start points/nodes with specified derivative mappings to
a loop of end points/nodes with specified derivative mappings.
Derivative d3 is through the wall. Currently limited to single element layer through wall.
Points/nodes order cycles fastest around the annulus, then through the wall.
Note doesn't support cross derivatives.
Arrays are indexed by n3 (node through wall, size 2), n2 (node along/radial), n1 (node around, variable size)
and coordinate component c.
:param nodes: The nodeset to create nodes in.
:param mesh: The mesh to create elements in.
:param nextNodeIdentifier, nextElementIdentifier: Next identifiers to use and increment.
:param startPointsx, startPointsd1, startPointsd2, startPointsd3, endPointsx, endPointsd1, endPointsd2, endPointsd3:
List array[n3][n1][c] or start/point coordinates and derivatives. To linearise through the wall, pass None to d3.
If both ends are linear through the wall, interior points are linear through the wall.
:param startNodeId, endNodeId: List array [n3][n1] of existing node identifiers to use at start/end. Pass None for
argument if no nodes are specified at end. These arguments are 'all or nothing'.
:param startDerivativesMap, endDerivativesMap: List array[n3][n1] of mappings for d/dxi1, d/dxi2, d/dxi3 at start/end of form:
( (1, -1, 0), (1, 0, 0), None ) where the first tuple means d/dxi1 = d/ds1 - d/ds2. Only 0, 1 and -1 may be used.
None means use default e.g. d/dxi2 = d/ds2.
Pass None for the entire argument to use the defaults d/dxi1 = d/ds1, d/dxi2 = d/ds2, d/dxi3 = d/ds3.
Pass a 4th mapping to apply to d/dxi1 on other side of node; if not supplied first mapping applies both sides.
:param nodetemplate: Full tricubic Hermite node template, can omit cross derivatives.
:param forceStartLinearXi3, forceMidLinearXi3, forceEndLinearXi3: Force start, middle or
end elements to be linear through the wall, even if d3 is supplied at either end.
Can only use forceMidLinearXi3 only if at least one end is linear in d3.
:param maxStartThickness, maxEndThickness: Optional maximum override on start/end thicknesses.
:param useCrossDerivatives: May only be True if no derivatives maps are in use.
:param elementsCountRadial: Optional number of elements in radial direction between start and end.
:param meshGroups: Optional list of Zinc MeshGroup for adding new elements to.
:return: Final values of nextNodeIdentifier, nextElementIdentifier
'''
assert (elementsCountRadial >= 1), 'createAnnulusMesh3d: Invalid number of radial elements'
startLinearXi3 = (not startPointsd3) or forceStartLinearXi3
endLinearXi3 = (not endPointsd3) or forceEndLinearXi3
midLinearXi3 = (startLinearXi3 and endLinearXi3) or ((startLinearXi3 or endLinearXi3) and forceMidLinearXi3)
# get list whether each row of nodes in elements is linear in Xi3
# this is for element use; start/end nodes may have d3 even if element is linear
rowLinearXi3 = [ startLinearXi3 ] + [ midLinearXi3 ]*(elementsCountRadial - 1) + [ endLinearXi3 ]
assert (not useCrossDerivatives) or ((not startDerivativesMap) and (not endDerivativesMap)), \
'createAnnulusMesh3d: Cannot use cross derivatives with derivatives map'
elementsCountWall = 1
nodesCountWall = elementsCountWall + 1
assert (len(startPointsx) == nodesCountWall) and (len(startPointsd1) == nodesCountWall) and (len(startPointsd2) == nodesCountWall) and \
(startLinearXi3 or (len(startPointsd3) == nodesCountWall)) and \
(len(endPointsx) == nodesCountWall) and (len(endPointsd1) == nodesCountWall) and (len(endPointsd2) == nodesCountWall) and \
(endLinearXi3 or (len(endPointsd3) == nodesCountWall)) and \
((startNodeId is None) or (len(startNodeId) == nodesCountWall)) and \
((endNodeId is None) or (len(endNodeId) == nodesCountWall)) and \
((startDerivativesMap is None) or (len(startDerivativesMap) == nodesCountWall)) and \
((endDerivativesMap is None) or (len(endDerivativesMap) == nodesCountWall)), \
'createAnnulusMesh3d: Mismatch in number of layers through wall'
elementsCountAround = nodesCountAround = len(startPointsx[0])
assert (nodesCountAround > 1), 'createAnnulusMesh3d: Invalid number of points/nodes around annulus'
for n3 in range(nodesCountWall):
assert (len(startPointsx[n3]) == nodesCountAround) and (len(startPointsd1[n3]) == nodesCountAround) and (len(startPointsd2[n3]) == nodesCountAround) and \
(startLinearXi3 or (len(startPointsd3[n3]) == nodesCountAround)) and \
(len(endPointsx[n3]) == nodesCountAround) and (len(endPointsd1[n3]) == nodesCountAround) and (len(endPointsd2[n3]) == nodesCountAround) and \
(endLinearXi3 or (len(endPointsd3[n3]) == nodesCountAround)) and \
((startNodeId is None) or (len(startNodeId[n3]) == nodesCountAround)) and \
((endNodeId is None) or (len(endNodeId[n3]) == nodesCountAround)) and \
((startDerivativesMap is None) or (len(startDerivativesMap[n3]) == nodesCountAround)) and \
((endDerivativesMap is None) or (len(endDerivativesMap[n3]) == nodesCountAround)), \
'createAnnulusMesh3d: Mismatch in number of points/nodes in layers through wall'
fm = mesh.getFieldmodule()
fm.beginChange()
cache = fm.createFieldcache()
coordinates = zinc_utils.getOrCreateCoordinateField(fm)
# Build arrays of points from start to end
px = [ [], [] ]
pd1 = [ [], [] ]
pd2 = [ [], [] ]
pd3 = [ [], [] ]
for n3 in range(2):
px [n3] = [ startPointsx [n3], endPointsx [n3] ]
pd1[n3] = [ startPointsd1[n3], endPointsd1[n3] ]
pd2[n3] = [ startPointsd2[n3], endPointsd2[n3] ]
pd3[n3] = [ startPointsd3[n3] if (startPointsd3 is not None) else None, \
endPointsd3[n3] if (endPointsd3 is not None) else None ]
if elementsCountRadial > 1:
# add in-between points
startPointsd = [ startPointsd1, startPointsd2, startPointsd3 ]
startPointsdslimit = 2 if (startPointsd3 is None) else 3
endPointsd = [ endPointsd1, endPointsd2, endPointsd3 ]
endPointsdslimit = 2 if (endPointsd3 is None) else 3
for n3 in range(2):
for n2 in range(1, elementsCountRadial):
px [n3].insert(n2, [ None ]*nodesCountAround)
pd1[n3].insert(n2, [ None ]*nodesCountAround)
pd2[n3].insert(n2, [ None ]*nodesCountAround)
pd3[n3].insert(n2, None if midLinearXi3 else [ None ]*nodesCountAround)
# compute on outside / n3 = 1, then map to inside using thickness
thicknesses = []
thicknesses.append([ vector.magnitude([ (startPointsx[1][n1][c] - startPointsx[0][n1][c]) for c in range(3) ]) for n1 in range(nodesCountAround) ])
if maxStartThickness:
for n1 in range(nodesCountAround):
thicknesses[0][n1] = min(thicknesses[0][n1], maxStartThickness)
for n2 in range(1, elementsCountRadial):
thicknesses.append([ None ]*nodesCountAround)
thicknesses.append([ vector.magnitude([ (endPointsx[1][n1][c] - endPointsx[0][n1][c]) for c in range(3) ]) for n1 in range(nodesCountAround) ])
if maxEndThickness:
for n1 in range(nodesCountAround):
thicknesses[-1][n1] = min(thicknesses[-1][n1], maxEndThickness)
n3 == 1
for n1 in range(nodesCountAround):
ax = startPointsx [n3][n1]
if (startDerivativesMap is None) or (startDerivativesMap[n3][n1][0] is None):
ad1 = startPointsd1[n3][n1]
else:
derivativesMap = startDerivativesMap[n3][n1][0]
ad1 = [ 0.0, 0.0, 0.0 ]
for ds in range(startPointsdslimit):
if derivativesMap[ds] != 0.0:
for c in range(3):
ad1[c] += derivativesMap[ds]*startPointsd[ds][n3][n1][c]
if len(startDerivativesMap[n3][n1]) > 3:
# average with d1 map for other side
derivativesMap = startDerivativesMap[n3][n1][3]
ad1 = [ 0.5*d for d in ad1 ]
if not derivativesMap:
for c in range(3):
ad1[c] += 0.5*startPointsd[0][n3][n1][c]
else:
for ds in range(startPointsdslimit):
if derivativesMap[ds] != 0.0:
for c in range(3):
ad1[c] += 0.5*derivativesMap[ds]*startPointsd[ds][n3][n1][c]
if (startDerivativesMap is None) or (startDerivativesMap[n3][n1][1] is None):
ad2 = startPointsd2[n3][n1]
else:
derivativesMap = startDerivativesMap[n3][n1][1]
ad2 = [ 0.0, 0.0, 0.0 ]
for ds in range(startPointsdslimit):
if derivativesMap[ds] != 0.0:
for c in range(3):
ad2[c] += derivativesMap[ds]*startPointsd[ds][n3][n1][c]
bx = endPointsx [n3][n1]
if (endDerivativesMap is None) or (endDerivativesMap[n3][n1][0] is None):
bd1 = endPointsd1[n3][n1]
else:
derivativesMap = endDerivativesMap[n3][n1][0]
bd1 = [ 0.0, 0.0, 0.0 ]
for ds in range(endPointsdslimit):
if derivativesMap[ds] != 0.0:
for c in range(3):
bd1[c] += derivativesMap[ds]*endPointsd[ds][n3][n1][c]
if len(endDerivativesMap[n3][n1]) > 3:
# average with d1 map for other side
derivativesMap = endDerivativesMap[n3][n1][3]
bd1 = [ 0.5*d for d in bd1 ]
if not derivativesMap:
for c in range(3):
bd1[c] += 0.5*endPointsd[0][n3][n1][c]
else:
for ds in range(endPointsdslimit):
if derivativesMap[ds] != 0.0:
for c in range(3):
bd1[c] += 0.5*derivativesMap[ds]*endPointsd[ds][n3][n1][c]
if (endDerivativesMap is None) or (endDerivativesMap[n3][n1][1] is None):
bd2 = endPointsd2[n3][n1]
else:
derivativesMap = endDerivativesMap[n3][n1][1]
bd2 = [ 0.0, 0.0, 0.0 ]
for ds in range(endPointsdslimit):
if derivativesMap[ds] != 0.0:
for c in range(3):
bd2[c] += derivativesMap[ds]*endPointsd[ds][n3][n1][c]
# scaling end derivatives to arc length gives even curvature along the curve
arcLength = interp.computeCubicHermiteArcLength(ax, ad2, bx, bd2, rescaleDerivatives = False)
scaledDerivatives = [ vector.setMagnitude(d2, arcLength) for d2 in [ ad2, bd2 ]]
mx, md2, me, mxi = interp.sampleCubicHermiteCurvesSmooth([ ax, bx ], scaledDerivatives, elementsCountRadial,
derivativeMagnitudeStart = vector.magnitude(ad2),
derivativeMagnitudeEnd = vector.magnitude(bd2))[0:4]
md1 = interp.interpolateSampleLinear([ ad1, bd1 ], me, mxi)
thi = interp.interpolateSampleLinear([ thicknesses[0][n1], thicknesses[-1][n1] ], me, mxi)
#md2 = interp.smoothCubicHermiteDerivativesLine(mx, md2, fixStartDerivative = True, fixEndDerivative = True)
for n2 in range(1, elementsCountRadial):
px [n3][n2][n1] = mx [n2]
pd1[n3][n2][n1] = md1[n2]
pd2[n3][n2][n1] = md2[n2]
thicknesses[n2][n1] = thi[n2]
# now get inner positions from normal and thickness, derivatives from curvature
for n2 in range(1, elementsCountRadial):
# first smooth derivative 1 around outer loop
pd1[1][n2] = interp.smoothCubicHermiteDerivativesLoop(px[1][n2], pd1[1][n2], magnitudeScalingMode = interp.DerivativeScalingMode.HARMONIC_MEAN)
for n1 in range(nodesCountAround):
normal = vector.normalise(vector.crossproduct3(pd1[1][n2][n1], pd2[1][n2][n1]))
thickness = thicknesses[n2][n1]
d3 = [ d*thickness for d in normal ]
px [0][n2][n1] = [ (px [1][n2][n1][c] - d3[c]) for c in range(3) ]
# calculate inner d1 from curvature around
n1m = n1 - 1
n1p = (n1 + 1)%nodesCountAround
curvature = 0.5*(
interp.getCubicHermiteCurvature(px[1][n2][n1m], pd1[1][n2][n1m], px[1][n2][n1 ], pd1[1][n2][n1 ], normal, 1.0) +
interp.getCubicHermiteCurvature(px[1][n2][n1 ], pd1[1][n2][n1 ], px[1][n2][n1p], pd1[1][n2][n1p], normal, 0.0))
factor = 1.0 + curvature*thickness
pd1[0][n2][n1] = [ factor*d for d in pd1[1][n2][n1] ]
# calculate inner d2 from curvature radially
n2m = n2 - 1
n2p = n2 + 1
curvature = 0.5*(
interp.getCubicHermiteCurvature(px[1][n2m][n1], pd2[1][n2m][n1], px[1][n2 ][n1], pd2[1][n2 ][n1], normal, 1.0) +
interp.getCubicHermiteCurvature(px[1][n2 ][n1], pd2[1][n2 ][n1], px[1][n2p][n1], pd2[1][n2p][n1], normal, 0.0))
factor = 1.0 + curvature*thickness
pd2[0][n2][n1] = [ factor*d for d in pd2[1][n2][n1] ]
if not midLinearXi3:
pd3[0][n2][n1] = pd3[1][n2][n1] = d3
# smooth derivative 1 around inner loop
pd1[0][n2] = interp.smoothCubicHermiteDerivativesLoop(px[0][n2], pd1[0][n2], magnitudeScalingMode = interp.DerivativeScalingMode.HARMONIC_MEAN)
for n3 in range(0, 1): # was (0, nodesCountWall)
# smooth derivative 2 radially/along annulus
for n1 in range(nodesCountAround):
sd2 = interp.smoothCubicHermiteDerivativesLine(
[ px [n3][n2][n1] for n2 in range(elementsCountRadial + 1) ],
[ pd2[n3][n2][n1] for n2 in range(elementsCountRadial + 1) ],
fixAllDirections = True, fixStartDerivative = True, fixEndDerivative = True,
magnitudeScalingMode = interp.DerivativeScalingMode.HARMONIC_MEAN)
for n2 in range(elementsCountRadial + 1):
pd2[n3][n2][n1] = sd2[n2]
##############
# Create nodes
##############
nodetemplate = nodes.createNodetemplate()
nodetemplate.defineField(coordinates)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_VALUE, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS1, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS2, 1)
if useCrossDerivatives:
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D2_DS1DS2, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS3, 1)
if useCrossDerivatives:
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D2_DS1DS3, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D2_DS2DS3, 1)
nodetemplate.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D3_DS1DS2DS3, 1)
nodetemplateLinearS3 = nodes.createNodetemplate()
nodetemplateLinearS3.defineField(coordinates)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_VALUE, 1)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS1, 1)
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D_DS2, 1)
if useCrossDerivatives:
nodetemplateLinearS3.setValueNumberOfVersions(coordinates, -1, Node.VALUE_LABEL_D2_DS1DS2, 1)
nodeIdentifier = nextNodeIdentifier
nodeId = [ [], [] ]
for n3 in range(2):
for n2 in range(elementsCountRadial + 1):
if (n2 == 0) and (startNodeId is not None):
rowNodeId = copy.deepcopy(startNodeId[n3])
elif (n2 == elementsCountRadial) and (endNodeId is not None):
rowNodeId = copy.deepcopy(endNodeId[n3])
else:
rowNodeId = []
nodetemplate1 = nodetemplate if pd3[n3][n2] else nodetemplateLinearS3
for n1 in range(nodesCountAround):
node = nodes.createNode(nodeIdentifier, nodetemplate1)
rowNodeId.append(nodeIdentifier)
cache.setNode(node)
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_VALUE, 1, px[n3][n2][n1])
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS1, 1, pd1[n3][n2][n1])
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS2, 1, pd2[n3][n2][n1])
if pd3[n3][n2]:
coordinates.setNodeParameters(cache, -1, Node.VALUE_LABEL_D_DS3, 1, pd3[n3][n2][n1])
nodeIdentifier = nodeIdentifier + 1
nodeId[n3].append(rowNodeId)
#################
# Create elements
#################
tricubichermite = eftfactory_tricubichermite(mesh, useCrossDerivatives)
bicubichermitelinear = eftfactory_bicubichermitelinear(mesh, useCrossDerivatives)
elementIdentifier = nextElementIdentifier
elementtemplateStandard = mesh.createElementtemplate()
elementtemplateStandard.setElementShapeType(Element.SHAPE_TYPE_CUBE)
elementtemplateX = mesh.createElementtemplate()
elementtemplateX.setElementShapeType(Element.SHAPE_TYPE_CUBE)
for e2 in range(elementsCountRadial):
nonlinearXi3 = (not rowLinearXi3[e2]) or (not rowLinearXi3[e2 + 1])
eftFactory = tricubichermite if nonlinearXi3 else bicubichermitelinear
eftStandard = eftFactory.createEftBasic()
elementtemplateStandard.defineField(coordinates, -1, eftStandard)
mapStartDerivatives = (e2 == 0) and (startDerivativesMap is not None)
mapStartLinearDerivativeXi3 = nonlinearXi3 and rowLinearXi3[e2]
mapEndDerivatives = (e2 == (elementsCountRadial - 1)) and (endDerivativesMap is not None)
mapEndLinearDerivativeXi3 = nonlinearXi3 and rowLinearXi3[e2 + 1]
mapDerivatives = mapStartDerivatives or mapStartLinearDerivativeXi3 or mapEndDerivatives or mapEndLinearDerivativeXi3
for e1 in range(elementsCountAround):
en = (e1 + 1)%elementsCountAround
nids = [ nodeId[0][e2][e1], nodeId[0][e2][en], nodeId[0][e2 + 1][e1], nodeId[0][e2 + 1][en],
nodeId[1][e2][e1], nodeId[1][e2][en], nodeId[1][e2 + 1][e1], nodeId[1][e2 + 1][en] ]
if mapDerivatives:
eft1 = eftFactory.createEftNoCrossDerivatives()
setEftScaleFactorIds(eft1, [1], [])
if mapStartLinearDerivativeXi3:
eftFactory.setEftLinearDerivative(eft1, [ 1, 5 ], Node.VALUE_LABEL_D_DS3, 1, 5, 1)
eftFactory.setEftLinearDerivative(eft1, [ 2, 6 ], Node.VALUE_LABEL_D_DS3, 2, 6, 1)
if mapStartDerivatives:
for i in range(2):
lns = [ 1, 5 ] if (i == 0) else [ 2, 6 ]
for n3 in range(2):
derivativesMap = startDerivativesMap[n3][e1] if (i == 0) else startDerivativesMap[n3][en]
# handle different d1 on each side of node
d1Map = derivativesMap[0] if ((i == 1) or (len(derivativesMap) < 4)) else derivativesMap[3]
d2Map = derivativesMap[1]
d3Map = derivativesMap[2]
# use temporary to safely swap DS1 and DS2:
ln = [ lns[n3] ]
if d1Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D_DS1, [ ( Node.VALUE_LABEL_D2_DS1DS2, [] ) ])
if d3Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D_DS3, [ ( Node.VALUE_LABEL_D2_DS2DS3, [] ) ])
if d2Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D_DS2, \
derivativeSignsToExpressionTerms( ( Node.VALUE_LABEL_D_DS1, Node.VALUE_LABEL_D_DS2, Node.VALUE_LABEL_D_DS3 ), d2Map))
if d1Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D2_DS1DS2, \
derivativeSignsToExpressionTerms( ( Node.VALUE_LABEL_D_DS1, Node.VALUE_LABEL_D_DS2, Node.VALUE_LABEL_D_DS3 ), d1Map))
if d3Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D2_DS2DS3, \
derivativeSignsToExpressionTerms( ( Node.VALUE_LABEL_D_DS1, Node.VALUE_LABEL_D_DS2, Node.VALUE_LABEL_D_DS3 ), d3Map))
if mapEndLinearDerivativeXi3:
eftFactory.setEftLinearDerivative(eft1, [ 3, 7 ], Node.VALUE_LABEL_D_DS3, 3, 7, 1)
eftFactory.setEftLinearDerivative(eft1, [ 4, 8 ], Node.VALUE_LABEL_D_DS3, 4, 8, 1)
if mapEndDerivatives:
for i in range(2):
lns = [ 3, 7 ] if (i == 0) else [ 4, 8 ]
for n3 in range(2):
derivativesMap = endDerivativesMap[n3][e1] if (i == 0) else endDerivativesMap[n3][en]
# handle different d1 on each side of node
d1Map = derivativesMap[0] if ((i == 1) or (len(derivativesMap) < 4)) else derivativesMap[3]
d2Map = derivativesMap[1]
d3Map = derivativesMap[2]
# use temporary to safely swap DS1 and DS2:
ln = [ lns[n3] ]
if d1Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D_DS1, [ ( Node.VALUE_LABEL_D2_DS1DS2, [] ) ])
if d3Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D_DS3, [ ( Node.VALUE_LABEL_D2_DS2DS3, [] ) ])
if d2Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D_DS2, \
derivativeSignsToExpressionTerms( ( Node.VALUE_LABEL_D_DS1, Node.VALUE_LABEL_D_DS2, Node.VALUE_LABEL_D_DS3 ), d2Map))
if d1Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D2_DS1DS2, \
derivativeSignsToExpressionTerms( ( Node.VALUE_LABEL_D_DS1, Node.VALUE_LABEL_D_DS2, Node.VALUE_LABEL_D_DS3 ), d1Map))
if d3Map is not None:
remapEftNodeValueLabel(eft1, ln, Node.VALUE_LABEL_D2_DS2DS3, \
derivativeSignsToExpressionTerms( ( Node.VALUE_LABEL_D_DS1, Node.VALUE_LABEL_D_DS2, Node.VALUE_LABEL_D_DS3 ), d3Map))
elementtemplateX.defineField(coordinates, -1, eft1)
elementtemplate1 = elementtemplateX
else:
eft1 = eftStandard
elementtemplate1 = elementtemplateStandard
element = mesh.createElement(elementIdentifier, elementtemplate1)
result2 = element.setNodesByIdentifier(eft1, nids)
if mapDerivatives:
result3 = element.setScaleFactors(eft1, [ -1.0 ])
#else:
# result3 = '-'
#print('create element annulus', element.isValid(), elementIdentifier, result2, result3, nids)
elementIdentifier += 1
for meshGroup in meshGroups:
meshGroup.addElement(element)
fm.endChange()
return nodeIdentifier, elementIdentifier