def attach_filter(s, bpf_filter, iface):
# XXX We generate the filter on the interface conf.iface
# because tcpdump open the "any" interface and ppp interfaces
# in cooked mode. As we use them in raw mode, the filter will not
# work... one solution could be to use "any" interface and translate
# the filter from cooked mode to raw mode
# mode
if not TCPDUMP:
return
try:
f = os.popen("%s -i %s -ddd -s %d '%s'" % (
conf.prog.tcpdump,
conf.iface if iface is None else iface,
MTU,
bpf_filter,
))
except OSError:
log_interactive.warning("Failed to attach filter.",
exc_info=True)
return
lines = f.readlines()
ret = f.close()
if ret:
log_interactive.warning(
"Failed to attach filter: tcpdump returned %d", ret
)
return
bp = get_bpf_pointer(lines)
s.setsockopt(socket.SOL_SOCKET, SO_ATTACH_FILTER, bp)
def attach_filter(s, bpf_filter, iface):
# XXX We generate the filter on the interface conf.iface
# because tcpdump open the "any" interface and ppp interfaces
# in cooked mode. As we use them in raw mode, the filter will not
# work... one solution could be to use "any" interface and translate
# the filter from cooked mode to raw mode
# mode
if not TCPDUMP:
return
try:
f = os.popen("%s -i %s -ddd -s 1600 '%s'" % (
conf.prog.tcpdump,
conf.iface if iface is None else iface,
bpf_filter,
))
except OSError as msg:
log_interactive.warning("Failed to execute tcpdump: (%s)")
return
lines = f.readlines()
if f.close():
raise Scapy_Exception("Filter parse error")
nb = int(lines[0])
bpf = ""
for l in lines[1:]:
bpf += struct.pack("HBBI", *(int(e) for e in l.split()))
# XXX. Argl! We need to give the kernel a pointer on the BPF,
# python object header seems to be 20 bytes. 36 bytes for x86 64bits arch.
bpfh = struct.pack("HL", nb, id(bpf) + (36 if IS_64BITS else 20))
s.setsockopt(SOL_SOCKET, SO_ATTACH_FILTER, bpfh)
def _in6_getifaddr(ifname):
"""
Returns a list of IPv6 addresses configured on the interface ifname.
"""
# Get the output of ifconfig
try:
f = os.popen("%s %s" % (conf.prog.ifconfig, ifname))
except OSError as msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Iterate over lines and extract IPv6 addresses
ret = []
for line in f:
if "inet6" in line:
addr = line.rstrip().split(
None, 2)[1] # The second element is the IPv6 address
else:
continue
if '%' in line: # Remove the interface identifier if present
addr = addr.split("%", 1)[0]
# Check if it is a valid IPv6 address
try:
socket.inet_pton(socket.AF_INET6, addr)
except:
continue
# Get the scope and keep the address
scope = in6_getscope(addr)
ret.append((addr, scope, ifname))
return ret
def attach_filter(s, bpf_filter, iface):
# XXX We generate the filter on the interface conf.iface
# because tcpdump open the "any" interface and ppp interfaces
# in cooked mode. As we use them in raw mode, the filter will not
# work... one solution could be to use "any" interface and translate
# the filter from cooked mode to raw mode
# mode
if not TCPDUMP:
return
try:
f = os.popen("%s -i %s -ddd -s %d '%s'" % (
conf.prog.tcpdump,
conf.iface if iface is None else iface,
MTU,
bpf_filter,
))
except OSError:
log_interactive.warning("Failed to attach filter.",
exc_info=True)
return
lines = f.readlines()
ret = f.close()
if ret:
log_interactive.warning(
"Failed to attach filter: tcpdump returned %d", ret
)
return
bp = get_bpf_pointer(lines)
s.setsockopt(socket.SOL_SOCKET, SO_ATTACH_FILTER, bp)
def attach_filter(s, bpf_filter, iface):
# XXX We generate the filter on the interface conf.iface
# because tcpdump open the "any" interface and ppp interfaces
# in cooked mode. As we use them in raw mode, the filter will not
# work... one solution could be to use "any" interface and translate
# the filter from cooked mode to raw mode
# mode
if not TCPDUMP:
return
try:
f = os.popen("%s -i %s -ddd -s 1600 '%s'" % (
conf.prog.tcpdump,
conf.iface if iface is None else iface,
bpf_filter,
))
except OSError as msg:
log_interactive.warning("Failed to execute tcpdump: (%s)")
return
lines = f.readlines()
if f.close():
raise Scapy_Exception("Filter parse error")
nb = int(lines[0])
bpf = ""
for l in lines[1:]:
bpf += struct.pack("HBBI", *(int(e) for e in l.split()))
# XXX. Argl! We need to give the kernel a pointer on the BPF,
# python object header seems to be 20 bytes. 36 bytes for x86 64bits arch.
bpfh = struct.pack("HL", nb, id(bpf) + (36 if IS_64BITS else 20))
s.setsockopt(SOL_SOCKET, SO_ATTACH_FILTER, bpfh)
def get_security_access(self, sock, level=1, seed_pkt=None):
# type: (_SocketUnion, int, Optional[Packet]) -> bool
log_interactive.info("Try bootloader security access for level %d" %
level)
if seed_pkt is None:
seed_pkt = self.get_seed_pkt(sock, level)
if not seed_pkt:
return False
if not any(seed_pkt.securitySeed):
return False
key_pkt = self.get_key_pkt(seed_pkt, level)
if key_pkt is None:
return False
try:
res = sock.sr1(key_pkt, timeout=5, verbose=False)
if sock.closed:
log_interactive.critical("[-] Socket closed during scan.")
raise Scapy_Exception("Socket closed during scan")
except (OSError, ValueError, Scapy_Exception) as e:
try:
last_seed_req = self._results[-1].req
last_state = self._results[-1].state
if not self._populate_retry(last_state, last_seed_req):
log_interactive.critical(
"[-] Exception during retry. This is bad")
except IndexError:
log_interactive.warning("[-] Couldn't populate retry.")
raise e
return self.evaluate_security_access_response(res, seed_pkt, key_pkt)
def _in6_getifaddr(ifname):
"""
Returns a list of IPv6 addresses configured on the interface ifname.
"""
# Get the output of ifconfig
try:
f = os.popen("%s %s" % (conf.prog.ifconfig, ifname))
except OSError as msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Iterate over lines and extract IPv6 addresses
ret = []
for line in f:
if "inet6" in line:
addr = line.rstrip().split(None, 2)[1] # The second element is the IPv6 address
else:
continue
if '%' in line: # Remove the interface identifier if present
addr = addr.split("%", 1)[0]
# Check if it is a valid IPv6 address
try:
socket.inet_pton(socket.AF_INET6, addr)
except:
continue
# Get the scope and keep the address
scope = in6_getscope(addr)
ret.append((addr, scope, ifname))
return ret
def save_session(fname="", session=None, pickleProto=-1):
# type: (str, Optional[Dict[str, Any]], int) -> None
"""Save current Scapy session to the file specified in the fname arg.
params:
- fname: file to save the scapy session in
- session: scapy session to use. If None, the console one will be used
- pickleProto: pickle proto version (default: -1 = latest)"""
from scapy import utils
from scapy.config import conf, ConfClass
if not fname:
fname = conf.session
if not fname:
conf.session = fname = utils.get_temp_file(keep=True)
log_interactive.info("Saving session into [%s]", fname)
if not session:
try:
from IPython import get_ipython
session = get_ipython().user_ns
except Exception:
session = six.moves.builtins.__dict__["scapy_session"]
if not session:
log_interactive.error("No session found ?!")
return
ignore = session.get("_scpybuiltins", [])
hard_ignore = ["scapy_session", "In", "Out"]
to_be_saved = session.copy()
for k in list(to_be_saved):
i = to_be_saved[k]
if k[0] == "_":
del(to_be_saved[k])
elif hasattr(i, "__module__") and i.__module__.startswith("IPython"):
del(to_be_saved[k])
elif isinstance(i, ConfClass):
del(to_be_saved[k])
elif k in ignore or k in hard_ignore:
del(to_be_saved[k])
elif isinstance(i, (type, types.ModuleType)):
if k[0] != "_":
log_interactive.warning("[%s] (%s) can't be saved.", k,
type(to_be_saved[k]))
del(to_be_saved[k])
try:
os.rename(fname, fname + ".bak")
except OSError:
pass
f = gzip.open(fname, "wb")
six.moves.cPickle.dump(to_be_saved, f, pickleProto)
f.close()
def _in6_getifaddr(ifname):
"""
Returns a list of IPv6 addresses configured on the interface ifname.
"""
# Get the output of ifconfig
try:
f = os.popen("%s %s" % (conf.prog.ifconfig, ifname))
except OSError,msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
def _in6_getifaddr(ifname):
"""
Returns a list of IPv6 addresses configured on the interface ifname.
"""
# Get the output of ifconfig
try:
f = os.popen("%s %s" % (conf.prog.ifconfig, ifname))
except OSError, msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
def attach_filter(s, filter):
# XXX We generate the filter on the interface conf.iface
# because tcpdump open the "any" interface and ppp interfaces
# in cooked mode. As we use them in raw mode, the filter will not
# work... one solution could be to use "any" interface and translate
# the filter from cooked mode to raw mode
# mode
if not TCPDUMP:
return
try:
f = os.popen("%s -i %s -ddd -s 1600 '%s'" % (conf.prog.tcpdump,conf.iface,filter))
except OSError,msg:
log_interactive.warning("Failed to execute tcpdump: (%s)")
return
def _evaluate_response(self,
state, # type: EcuState
request, # type: Packet
response, # type: Optional[Packet]
**kwargs # type: Optional[Dict[str, Any]]
): # type: (...) -> bool
if response and response.service == 0x51:
log_interactive.warning(
"ECUResetPositiveResponse detected! This might have changed "
"the state of the ECU under test.")
# remove args from kwargs since they will be overwritten
kwargs["exit_if_service_not_supported"] = False # type: ignore
return super(UDS_ServiceEnumerator, self)._evaluate_response(
state, request, response, **kwargs)
def attach_filter(s, bpf_filter, iface):
# XXX We generate the filter on the interface conf.iface
# because tcpdump open the "any" interface and ppp interfaces
# in cooked mode. As we use them in raw mode, the filter will not
# work... one solution could be to use "any" interface and translate
# the filter from cooked mode to raw mode
# mode
if not TCPDUMP:
return
try:
f = os.popen("%s -i %s -ddd -s 1600 '%s'" % (
conf.prog.tcpdump,
conf.iface if iface is None else iface,
bpf_filter,
))
except OSError, msg:
log_interactive.warning("Failed to execute tcpdump: (%s)")
return
def in6_getifaddr():
"""
Returns a list of 3-tuples of the form (addr, scope, iface) where
'addr' is the address of scope 'scope' associated to the interface
'iface'.
This is the list of all addresses of all interfaces available on
the system.
"""
# List all network interfaces
if OPENBSD or SOLARIS:
if SOLARIS:
cmd = "%s -a6"
else:
cmd = "%s"
try:
f = os.popen(cmd % conf.prog.ifconfig)
except OSError:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = []
for line in f:
if "flags" in line:
iface = line.split()[0].rstrip(':')
splitted_line.append(iface)
else: # FreeBSD, NetBSD or Darwin
try:
f = os.popen("%s -l" % conf.prog.ifconfig)
except OSError:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = f.readline().rstrip().split()
ret = []
for i in splitted_line:
ret += _in6_getifaddr(i)
f.close()
return ret
def _pcap_check(cls):
"""Performs checks/restart pcap adapter"""
if not conf.use_pcap:
# Winpcap/Npcap isn't installed
return
_detect = pcap_service_status()
def _ask_user():
if not conf.interactive:
return False
msg = "Do you want to start it ? (yes/no) [y]: "
try:
# Better IPython compatibility
import IPython
return IPython.utils.io.ask_yes_no(msg, default='y')
except (NameError, ImportError):
while True:
_confir = input(msg)
_confir = _confir.lower().strip()
if _confir in ["yes", "y", ""]:
return True
elif _confir in ["no", "n"]:
return False
if _detect:
# No action needed
return
else:
log_interactive.warning(
"Scapy has detected that your pcap service is not running !"
)
if not conf.interactive or _ask_user():
succeed = pcap_service_start(askadmin=conf.interactive)
if succeed:
log_loading.info("Pcap service started !")
return
log_loading.warning(
"Could not start the pcap service! "
"You probably won't be able to send packets. "
"Check your winpcap/npcap installation "
"and access rights."
)
def in6_getifaddr():
"""
Returns a list of 3-tuples of the form (addr, scope, iface) where
'addr' is the address of scope 'scope' associated to the interface
'iface'.
This is the list of all addresses of all interfaces available on
the system.
"""
# List all network interfaces
if OPENBSD:
try:
f = os.popen("%s" % conf.prog.ifconfig)
except OSError as msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = []
for l in f:
if "flags" in l:
iface = l.split()[0].rstrip(':')
splitted_line.append(iface)
else: # FreeBSD, NetBSD or Darwin
try:
f = os.popen("%s -l" % conf.prog.ifconfig)
except OSError as msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = f.readline().rstrip().split()
ret = []
for i in splitted_line:
ret += _in6_getifaddr(i)
return ret
def in6_getifaddr():
"""
Returns a list of 3-tuples of the form (addr, scope, iface) where
'addr' is the address of scope 'scope' associated to the interface
'iface'.
This is the list of all addresses of all interfaces available on
the system.
"""
# List all network interfaces
if scapy.arch.OPENBSD:
try:
f = os.popen("%s" % conf.prog.ifconfig)
except OSError, msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = []
for l in f:
if "flags" in l:
iface = l.split()[0].rstrip(":")
splitted_line.append(iface)
def in6_getifaddr():
"""
Returns a list of 3-tuples of the form (addr, scope, iface) where
'addr' is the address of scope 'scope' associated to the interface
'iface'.
This is the list of all addresses of all interfaces available on
the system.
"""
# List all network interfaces
if scapy.arch.OPENBSD:
try:
f = os.popen("%s" % conf.prog.ifconfig)
except OSError, msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = []
for l in f:
if "flags" in l:
iface = l.split()[0].rstrip(':')
splitted_line.append(iface)
except OSError,msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = []
for l in f:
if "flags" in l:
iface = l.split()[0].rstrip(':')
splitted_line.append(iface)
else: # FreeBSD, NetBSD or Darwin
try:
f = os.popen("%s -l" % conf.prog.ifconfig)
except OSError,msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = f.readline().rstrip().split()
ret = []
for i in splitted_line:
ret += _in6_getifaddr(i)
return ret
def read_routes6():
"""Return a list of IPv6 routes than can be used by Scapy."""
# Call netstat to retrieve IPv6 routes
def run(self, *args, **kargs):
log_interactive.warning("run() method deprecated. The instance is now callable")
self(*args,**kargs)
def run(self, *args, **kargs):
log_interactive.warning(
"run() method deprecated. The instance is now callable")
self(*args, **kargs)
except OSError, msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = []
for l in f:
if "flags" in l:
iface = l.split()[0].rstrip(':')
splitted_line.append(iface)
else: # FreeBSD, NetBSD or Darwin
try:
f = os.popen("%s -l" % conf.prog.ifconfig)
except OSError, msg:
log_interactive.warning("Failed to execute ifconfig.")
return []
# Get the list of network interfaces
splitted_line = f.readline().rstrip().split()
ret = []
for i in splitted_line:
ret += _in6_getifaddr(i)
return ret
def read_routes6():
"""Return a list of IPv6 routes than can be used by Scapy."""
# Call netstat to retrieve IPv6 routes