def alignImage(self):
if scribus.haveDoc():
restore_units = scribus.getUnit(
) # since there is an issue with units other than points,
scribus.setUnit(0) # we switch to points then restore later.
nbrSelected = scribus.selectionCount()
objList = []
for i in range(nbrSelected):
objList.append(scribus.getSelectedObject(i))
scribus.deselectAll()
for i in range(nbrSelected):
try:
obj = objList[i]
scribus.selectObject(obj)
frameW, frameH = scribus.getSize(obj)
saveScaleX, saveScaleY = scribus.getImageScale(obj)
scribus.setScaleImageToFrame(1, 0, obj)
fullScaleX, fullScaleY = scribus.getImageScale(obj)
scribus.setScaleImageToFrame(0, 0, obj)
scribus.setImageScale(saveScaleX, saveScaleY, obj)
imageW = frameW * (saveScaleX / fullScaleX)
imageH = frameH * (saveScaleY / fullScaleY)
imageX = 0.0
imageY = 0.0
if self.alignVar.get()[0] == "T":
imageY = 0.0
elif self.alignVar.get()[0] == "M":
imageY = (frameH - imageH) / 2.0
elif self.alignVar.get()[0] == "B":
imageY = (frameH - imageH)
if self.alignVar.get()[1] == "L":
imageX = 0.0
elif self.alignVar.get()[1] == "C":
imageX = (frameW - imageW) / 2.0
elif self.alignVar.get()[1] == "R":
imageX = (frameW - imageW)
scribus.setImageOffset(imageX, imageY, obj)
scribus.docChanged(1)
scribus.setRedraw(True)
scribus.deselectAll()
except:
nothing = "nothing"
scribus.setUnit(restore_units)
self.master.destroy()
def alignImage(self):
if scribus.haveDoc():
restore_units = scribus.getUnit() # since there is an issue with units other than points,
scribus.setUnit(0) # we switch to points then restore later.
nbrSelected = scribus.selectionCount()
objList = []
for i in range(nbrSelected):
objList.append(scribus.getSelectedObject(i))
scribus.deselectAll()
for i in range(nbrSelected):
try:
obj = objList[i]
scribus.selectObject(obj)
frameW, frameH = scribus.getSize(obj)
saveScaleX, saveScaleY = scribus.getImageScale(obj)
scribus.setScaleImageToFrame(1, 0, obj)
fullScaleX, fullScaleY = scribus.getImageScale(obj)
scribus.setScaleImageToFrame(0, 0, obj)
scribus.setImageScale(saveScaleX, saveScaleY, obj)
imageW = frameW * (saveScaleX / fullScaleX)
imageH = frameH * (saveScaleY / fullScaleY)
imageX = 0.0
imageY = 0.0
if self.alignVar.get()[0] == "T":
imageY = 0.0
elif self.alignVar.get()[0] == "M":
imageY = (frameH - imageH) / 2.0
elif self.alignVar.get()[0] == "B":
imageY = (frameH - imageH)
if self.alignVar.get()[1] == "L":
imageX = 0.0
elif self.alignVar.get()[1] == "C":
imageX = (frameW - imageW) / 2.0
elif self.alignVar.get()[1] == "R":
imageX = (frameW - imageW)
scribus.setImageOffset(imageX, imageY, obj)
scribus.docChanged(1)
scribus.setRedraw(True)
scribus.deselectAll()
except:
nothing = "nothing"
scribus.setUnit(restore_units)
self.master.destroy()
def __init__(self, *args):
"""
Optional argument "name"
"""
if len(args) > 0:
self.name = args[0]
self.path = sc.getImageFile(self.name)
self.width, self.height = sc.getSize(self.name)
self.offset_x, self.offset_y = sc.getImageOffset(self.name)
self.scale_x, self.scale_y = sc.getImageScale(self.name)
def main():
if sc.selectionCount() == 2:
images = ( sc.getSelectedObject(0), sc.getSelectedObject(1) )
for image in images:
if sc.getObjectType(image) != "ImageFrame":
logging.debug(f"Image type {sc.getObjectType(image)}, but 'ImageFrame' expected")
error_msg(f'{image} not an image frame. But type {sc.getObjectType(image)}')
image_files = (sc.getImageFile(images[0]), sc.getImageFile(images[1]))
# keep Scale and Offset, before reset by image load
image_0_offset = sc.getImageOffset(images[0])
image_0_scale = sc.getImageScale(images[0])
image_1_offset = sc.getImageOffset(images[1])
image_1_scale = sc.getImageScale(images[1])
sc.loadImage(image_files[1], images[0])
sc.loadImage(image_files[0], images[1])
if sc.getSize(images[0]) == sc.getSize(images[1]):
# Frames have the same size swap scale and offset
logging.debug(f"Frames have the same size {sc.getSize(images[0])}, swap offset and scale")
logging.debug(f"Image 0: {images[0]}, Image 1: {images[1]}")
logging.debug(f"Image properties: offset {sc.getImageOffset(images[0])}, scale {image_0_scale}")
sc.setImageOffset(*image_1_offset, images[0])
sc.setImageScale(*image_1_scale, images[0])
sc.setImageOffset(*image_0_offset, images[1])
sc.setImageScale(*image_0_scale, images[1])
else:
# scale and center
logging.debug("Different size scale and center, both.")
for name in images:
x, y = sff.scale_to_frame(name)
sff.center_image(name, x, y)
else:
logging.debug(f"{sc.selectionCount()} frames selected.")
error_msg(f'{sc.selectionCount()} frames selected')
def center_image(name, image_x, image_y):
"""
name: image naem
image_x: original image width
image_y: original image higth
"""
scaleC, _ = sc.getImageScale(name)
offX, offY = sc.getImageOffset(name)
frame_x, frame_y = sc.getSize(name)
ix = image_x * scaleC
iy = image_y * scaleC
if ix != frame_x:
offX = (frame_x - ix) / 2
if iy != frame_y:
offY = (frame_y - iy) / 2
sc.setImageOffset(offX, offY, name)
def scale_to_frame(obj):
"""
scales the image so that it fills the frame completely.
One dimension of the image (width/height) may overflow the frame,
but at least one dimension will fill the frame exactly
return scaled image size (X, Y)
"""
try:
sc.setScaleImageToFrame(True, False, obj)
scale_x, scale_y = sc.getImageScale(obj)
frame_x, frame_y = sc.getSize(obj)
sc.setScaleImageToFrame(False, False, obj)
if scale_x > scale_y:
scale = scale_x
elif scale_y > scale_x:
scale = scale_y
sc.setImageScale(scale, scale, obj)
image_x = int(round(frame_x / scale_x))
image_y = int(round(frame_y / scale_y))
return (image_x, image_y)
except:
logging.info("scaling for image {} failed".format(obj))
def main(argv):
unit = scribus.getUnit()
units = [' pts', 'mm', ' inches', ' picas', 'cm', ' ciceros']
unitlabel = units[unit]
if scribus.selectionCount() == 0:
scribus.messageBox(
'Scribus - Script Error',
"There is no object selected.\nPlease select a text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
if scribus.selectionCount() > 1:
scribus.messageBox(
'Scribus - Script Error',
"You have more than one object selected.\nPlease select one text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
textbox = scribus.getSelectedObject()
pageitems = scribus.getPageItems()
boxcount = 1
for item in pageitems:
if (item[0] == textbox):
if (item[1] != 4):
scribus.messageBox('Scribus - Script Error',
"This is not a textframe. Try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
# While we're finding out what kind of frame is selected, we'll also make sure we
# will come up with a unique name for our infobox frame - it's possible we may want
# more than one for a multicolumn frame.
if (item[0] == ("infobox" + str(boxcount) + textbox)):
boxcount += 1
left, top = scribus.getPosition(textbox)
o_width, o_height = scribus.getSize(textbox)
o_cols = int(scribus.getColumns(textbox))
o_gap = scribus.getColumnGap(textbox)
columns_width = 0
column_pos = 0
o_colwidth = (o_width - ((o_cols - 1) * o_gap)) / o_cols
if (o_cols > 1):
while (columns_width > o_cols or columns_width < 1):
columns_width = scribus.valueDialog(
'Width', 'How many columns width shall the ' + 'box be (max ' +
str(o_cols) + ')?', '1')
columns_width = int(columns_width)
if (columns_width < o_cols):
max = o_cols - columns_width
while (column_pos <= max and column_pos <= 1):
column_pos = scribus.valueDialog(
'Placement', 'In which column do you want '
'to place the box (1 to ' + str(o_cols) + ')?', '1')
column_pos = int(column_pos) - 1
if (o_cols == 1):
columns_width = 1
new_height = 0
while (new_height <= 0):
new_height = scribus.valueDialog(
'Height', 'Your frame height is ' + str(o_height) + unitlabel +
'. How tall\n do you want your ' + 'infobox to be in ' +
unitlabel +
'?\n If you load an image with the script, height will be\n calculated, so the value here will not\n matter in that case.',
str(o_height))
if (not new_height):
sys.exit(0)
new_height = float(new_height)
new_top = -1
while (new_top < 0):
new_top = scribus.valueDialog(
'Y-Pos',
'The top of your infobox is currently\n' + str(top) + unitlabel +
'. Where do you want \n' + 'the top to be in ' + unitlabel + '?',
str(top))
if (not new_top):
sys.exit(0)
new_top = float(new_top)
framename = scribus.valueDialog(
'Name of Frame', 'Name your frame or use this default name',
"infobox" + str(boxcount) + textbox)
if (not framename):
sys.exit(0)
frametype = 'text'
frametype = scribus.valueDialog(
'Frame Type',
'Change to anything other\n than "text" for image frame.\nEnter "imageL" to also load an image',
frametype)
if (not frametype):
sys.exit(0)
new_width = columns_width * o_colwidth + (columns_width - 1) * o_gap
new_left = left + ((column_pos) * o_colwidth) + ((column_pos) * o_gap)
if (frametype == 'text'):
new_textbox = scribus.createText(new_left, float(new_top), new_width,
float(new_height), framename)
scribus.setColumnGap(0, new_textbox)
scribus.setColumns(1, new_textbox)
scribus.textFlowMode(new_textbox, 1)
else:
if (frametype == 'imageL'):
imageload = scribus.fileDialog(
'Load image',
'Images(*.jpg *.png *.tif *.JPG *.PNG *.jpeg *.JPEG *.TIF)',
haspreview=1)
new_image = scribus.createImage(new_left,
float(new_top), new_width,
float(new_height), framename)
scribus.textFlowMode(new_image, 1)
scribus.loadImage(imageload, new_image)
scribus.setScaleImageToFrame(1, 0, new_image)
currwidth, currheight = scribus.getSize(new_image)
Xscale, Yscale = scribus.getImageScale(new_image)
if (Xscale != Yscale):
scribus.sizeObject(currwidth, currheight * Xscale / Yscale,
new_image)
scribus.setScaleImageToFrame(1, 1, new_image)
else:
new_image = scribus.createImage(new_left,
float(new_top), new_width,
float(new_height), framename)
scribus.textFlowMode(new_image, 1)
scribus.setScaleImageToFrame(1, 1, new_image)
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 2 of the License, or
# (at your option) any later version.
import scribus as sc
if sc.haveDoc():
nbrSelected = sc.selectionCount()
objList = []
for i in range(nbrSelected):
objList.append(sc.getSelectedObject(i))
for i in range(nbrSelected):
try:
obj = objList[i]
sc.setScaleImageToFrame(True, False, obj)
scaleX, scaleY = sc.getImageScale(obj)
sc.setScaleImageToFrame(False, False, obj)
if scaleX > scaleY:
scale = scaleX
sc.setImageScale(scale, scale, obj)
elif scaleY > scaleX:
scale = scaleY
sc.setImageScale(scale, scale, obj)
sc.docChanged(1)
sc.setRedraw(True)
except Exception:
pass
if not scribus.haveDoc():
scribus.messageBox('Usage Error',
'You need a Document open',
icon=0,
button1=1)
sys.exit(2)
# TODO: ask for the range of pages (current page if empty)
unit = scribus.getUnit()
scribus.setUnit(unit)
scribus.setUnit(scribus.UNIT_MILLIMETERS)
item = scribus.getSelectedObject()
path = scribus.getImageFile(item)
if path == '':
scribus.messageBox('Usage Error',
'You need to first load an image',
icon=0,
button1=1)
sys.exit(2)
scribus.setScaleImageToFrame(True, False, item)
scribus.setScaleImageToFrame(False, False, item)
scale = scribus.getImageScale(item)
max_scale = max(scale)
scribus.setImageScale(max_scale, max_scale, item)
scribus.setUnit(unit)
def main(argv):
unit = scribus.getUnit()
units = [' pts','mm',' inches',' picas','cm',' ciceros']
unitlabel = units[unit]
if scribus.selectionCount() == 0:
scribus.messageBox('Scribus - Script Error',
"There is no object selected.\nPlease select a text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
if scribus.selectionCount() > 1:
scribus.messageBox('Scribus - Script Error',
"You have more than one object selected.\nPlease select one text frame and try again.",
scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
textbox = scribus.getSelectedObject()
pageitems = scribus.getPageItems()
boxcount = 1
for item in pageitems:
if (item[0] == textbox):
if (item[1] != 4):
scribus.messageBox('Scribus - Script Error',
"This is not a textframe. Try again.", scribus.ICON_WARNING, scribus.BUTTON_OK)
sys.exit(2)
# While we're finding out what kind of frame is selected, we'll also make sure we
# will come up with a unique name for our infobox frame - it's possible we may want
# more than one for a multicolumn frame.
if (item[0] == ("infobox" + str(boxcount) + textbox)):
boxcount += 1
left, top = scribus.getPosition(textbox)
o_width, o_height = scribus.getSize(textbox)
o_cols = int(scribus.getColumns(textbox))
o_gap = scribus.getColumnGap(textbox)
columns_width = 0
column_pos = 0
o_colwidth = (o_width - ((o_cols - 1) * o_gap)) / o_cols
if (o_cols > 1):
while (columns_width > o_cols or columns_width < 1):
columns_width = scribus.valueDialog('Width',
'How many columns width shall the '+
'box be (max ' + str(o_cols) + ')?','1')
columns_width = int(columns_width)
if (columns_width < o_cols):
max = o_cols - columns_width
while (column_pos <= max and column_pos <= 1):
column_pos = scribus.valueDialog('Placement',
'In which column do you want '
'to place the box (1 to ' +
str(o_cols) + ')?','1')
column_pos = int(column_pos) - 1
if (o_cols == 1):
columns_width = 1
new_height = 0
while (new_height <= 0):
new_height = scribus.valueDialog('Height','Your frame height is '+ str(o_height) +
unitlabel +'. How tall\n do you want your ' +
'infobox to be in '+ unitlabel +'?\n If you load an image with the script, height will be\n calculated, so the value here will not\n matter in that case.', str(o_height))
if (not new_height) :
sys.exit(0)
new_height = float(new_height)
new_top = -1
while (new_top < 0):
new_top = scribus.valueDialog('Y-Pos','The top of your infobox is currently\n'+ str(top) +
unitlabel +'. Where do you want \n' +
'the top to be in '+ unitlabel +'?', str(top))
if (not new_top) :
sys.exit(0)
new_top = float(new_top)
framename = scribus.valueDialog('Name of Frame','Name your frame or use this default name',"infobox" + str(boxcount) + textbox)
if (not framename) :
sys.exit(0)
frametype = 'text'
frametype = scribus.valueDialog('Frame Type','Change to anything other\n than "text" for image frame.\nEnter "imageL" to also load an image',frametype)
if (not frametype) :
sys.exit(0)
new_width = columns_width * o_colwidth + (columns_width-1) * o_gap
new_left = left + ((column_pos) * o_colwidth) + ((column_pos) * o_gap)
if (frametype == 'text'):
new_textbox = scribus.createText(new_left, float(new_top), new_width, float(new_height),framename)
scribus.setColumnGap(0, new_textbox)
scribus.setColumns(1, new_textbox)
scribus.textFlowMode(new_textbox, 1)
else:
if (frametype == 'imageL'):
imageload = scribus.fileDialog('Load image','Images(*.jpg *.png *.tif *.JPG *.PNG *.jpeg *.JPEG *.TIF)',haspreview=1)
new_image = scribus.createImage(new_left, float(new_top), new_width, float(new_height),framename)
scribus.textFlowMode(new_image, 1)
scribus.loadImage(imageload, new_image)
scribus.setScaleImageToFrame(1,0,new_image)
currwidth, currheight = scribus.getSize(new_image)
Xscale, Yscale = scribus.getImageScale(new_image)
if (Xscale != Yscale):
scribus.sizeObject(currwidth, currheight*Xscale/Yscale, new_image)
scribus.setScaleImageToFrame(1,1,new_image)
else:
new_image = scribus.createImage(new_left, float(new_top), new_width, float(new_height),framename)
scribus.textFlowMode(new_image, 1)
scribus.setScaleImageToFrame(1,1,new_image)
layercount].elements[elementcount].position.x - (
size_x / 2)
y_pos = albumdata.pages[pagenum].layers[
layercount].elements[elementcount].position.y - (
size_y / 2)
f = scribus.createImage(x_pos, y_pos, size_x, size_y)
scribus.loadImage(
imagedir + albumdata.pages[pagenum].layers[layercount].
elements[elementcount].picture.id + ".JPG", f)
scribus.setScaleImageToFrame(scaletoframe=1,
proportional=0,
name=f)
# https://wiki.scribus.net/canvas/Fitting_an_Image_to_its_Frame
# fitimage2frame_v2.py --> An advantage of this method is that will work regardless of the proportions of the image.
# If you want to use this in Scribus versions >=1.5.0, you will need to change the scaleImage() command to setImageScale(), otherwise with the same parameters inside
xscale, yscale = scribus.getImageScale(f)
width_pi = int(albumdata.pages[pagenum].layers[layercount].
elements[elementcount].picture.dimension.
width) #original image width in pixels
height_pi = int(
albumdata.pages[pagenum].layers[layercount].
elements[elementcount].picture.dimension.height
) #original image height in pixels
scribus.setScaleImageToFrame(scaletoframe=0,
proportional=1,
name=f)
if (xscale > yscale):
scale = xscale
scribus.setImageScale(scale, scale, f)
dpmm = width_pi / size_x # dots per mm of the current image
offset_x = 0
