def __init__(self, printer, config):
self._printer = printer
self._config = config
# Serial port
baud = config.getint('baud', 250000)
self._serialport = config.get('serial', '/dev/ttyS0')
self.serial = serialhdl.SerialReader(printer.reactor, self._serialport,
baud)
self.is_shutdown = False
self._shutdown_msg = ""
self._is_fileoutput = False
self._timeout_timer = printer.reactor.register_timer(
self.timeout_handler)
# Config building
self._emergency_stop_cmd = self._clear_shutdown_cmd = None
self._oids = []
self._config_cmds = []
self._config_crc = None
self._init_callbacks = []
self._pin_map = config.get('pin_map', None)
self._custom = config.get('custom', '')
# Move command queuing
ffi_main, self.ffi_lib = chelper.get_ffi()
self._max_stepper_error = config.getfloat('max_stepper_error',
0.000025)
self._steppers = []
self._steppersync = None
# Print time to clock epoch calculations
self._print_start_time = 0.
self._mcu_freq = 0.
# Stats
self._stats_sumsq_base = 0.
self._mcu_tick_avg = 0.
self._mcu_tick_stddev = 0.
def __init__(self, config, clocksync):
self._printer = config.get_printer()
self._clocksync = clocksync
self._reactor = self._printer.get_reactor()
self._name = config.get_name()
if self._name.startswith('mcu '):
self._name = self._name[4:]
self._printer.register_event_handler("klippy:connect", self._connect)
self._printer.register_event_handler("klippy:mcu_identify",
self._mcu_identify)
self._printer.register_event_handler("klippy:shutdown", self._shutdown)
self._printer.register_event_handler("klippy:disconnect",
self._disconnect)
# Serial port
self._serialport = config.get('serial', '/dev/ttyS0')
serial_rts = True
if config.get('restart_method', None) == "cheetah":
# Special case: Cheetah boards require RTS to be deasserted, else
# a reset will trigger the built-in bootloader.
serial_rts = False
baud = 0
if not (self._serialport.startswith("/dev/rpmsg_")
or self._serialport.startswith("/tmp/klipper_host_")):
baud = config.getint('baud', 250000, minval=2400)
self._serial = serialhdl.SerialReader(self._reactor, self._serialport,
baud, serial_rts)
# Restarts
self._restart_method = 'command'
if baud:
rmethods = {
m: m
for m in [None, 'arduino', 'cheetah', 'command', 'rpi_usb']
}
self._restart_method = config.getchoice('restart_method', rmethods,
None)
self._reset_cmd = self._config_reset_cmd = None
self._emergency_stop_cmd = None
self._is_shutdown = self._is_timeout = False
self._shutdown_msg = ""
# Config building
self._printer.lookup_object('pins').register_chip(self._name, self)
self._oid_count = 0
self._config_callbacks = []
self._config_cmds = []
self._restart_cmds = []
self._init_cmds = []
self._pin_map = config.get('pin_map', None)
self._mcu_freq = 0.
# Move command queuing
ffi_main, self._ffi_lib = chelper.get_ffi()
self._max_stepper_error = config.getfloat('max_stepper_error',
0.000025,
minval=0.)
self._stepqueues = []
self._steppersync = None
# Stats
self._stats_sumsq_base = 0.
self._mcu_tick_avg = 0.
self._mcu_tick_stddev = 0.
self._mcu_tick_awake = 0.
def __init__(self, reactor, serialport, baud, canbus_iface, canbus_nodeid):
self.serialport = serialport
self.baud = baud
self.canbus_iface = canbus_iface
self.canbus_nodeid = canbus_nodeid
self.ser = serialhdl.SerialReader(reactor)
self.reactor = reactor
self.start_time = reactor.monotonic()
self.clocksync = clocksync.ClockSync(self.reactor)
self.fd = sys.stdin.fileno()
util.set_nonblock(self.fd)
self.mcu_freq = 0
self.pins = pins.PinResolver(validate_aliases=False)
self.data = ""
reactor.register_fd(self.fd, self.process_kbd)
reactor.register_callback(self.connect)
self.local_commands = {
"PINS": self.command_PINS,
"SET": self.command_SET,
"DELAY": self.command_DELAY,
"FLOOD": self.command_FLOOD,
"SUPPRESS": self.command_SUPPRESS,
"STATS": self.command_STATS,
"LIST": self.command_LIST,
"HELP": self.command_HELP,
}
self.eval_globals = {}
def __init__(self, config, clocksync):
self._printer = printer = config.get_printer()
self._clocksync = clocksync
self._reactor = printer.get_reactor()
self._name = config.get_name()
if self._name.startswith('mcu '):
self._name = self._name[4:]
# Serial port
self._serialport = config.get('serial')
self._baud = 0
if not (self._serialport.startswith("/dev/rpmsg_")
or self._serialport.startswith("/tmp/klipper_host_")):
self._baud = config.getint('baud', 250000, minval=2400)
self._serial = serialhdl.SerialReader(self._reactor)
# Restarts
restart_methods = [
None, 'arduino', 'cheetah', 'command', 'rpi_usb', 'pin', 'script'
]
self._restart_method = 'command'
if self._baud:
rmethods = {m: m for m in restart_methods}
self._restart_method = config.getchoice('restart_method', rmethods,
None)
self._reset_cmd = self._config_reset_cmd = None
self._emergency_stop_cmd = None
self._is_shutdown = self._is_timeout = False
self._shutdown_msg = ""
# Config building
printer.lookup_object('pins').register_chip(self._name, self)
self._oid_count = 0
self._config_callbacks = []
self._config_cmds = []
self._restart_cmds = []
self._init_cmds = []
self._pin_map = config.get('pin_map', None)
self._mcu_freq = 0.
# Move command queuing
ffi_main, self._ffi_lib = chelper.get_ffi()
self._max_stepper_error = config.getfloat('max_stepper_error',
0.000025,
minval=0.)
self._reserved_move_slots = 0
self._stepqueues = []
self._steppersync = None
# Stats
self._get_status_info = {}
self._stats_sumsq_base = 0.
self._mcu_tick_avg = 0.
self._mcu_tick_stddev = 0.
self._mcu_tick_awake = 0.
# Register handlers
printer.register_event_handler("klippy:connect", self._connect)
printer.register_event_handler("klippy:mcu_identify",
self._mcu_identify)
printer.register_event_handler("klippy:shutdown", self._shutdown)
printer.register_event_handler("klippy:disconnect", self._disconnect)
def __init__(self, k_reactor, device, baud, board_cfg):
self.reactor = k_reactor
# TODO: a change in baudrate will cause an issue, come up
# with a method for handling it gracefully
self._serial = serialhdl.SerialReader(self.reactor, device, baud)
self.clocksync = clocksync.ClockSync(self.reactor)
self.board_config = board_cfg
self.fatfs = None
self.connect_completion = None
self.connected = False
self.enumerations = {}
def __init__(self, printer, config, clocksync):
self._printer = printer
self._clocksync = clocksync
self._reactor = printer.get_reactor()
self._name = config.get_name()
if self._name.startswith('mcu '):
self._name = self._name[4:]
self.logger = printer.logger.getChild("mcu.%s" % (self._name, ))
self._clocksync.setLogger(self.logger)
# Serial port
self._serialport = config.get('serial', '/dev/ttyS0')
baud = config.getint('baud', 250000, minval=2400)
if (self._serialport.startswith("/dev/rpmsg_")
or self._serialport.startswith("/tmp/klipper_host_")):
baud = 0
self._serial = serialhdl.SerialReader(
self._reactor,
self._serialport,
baud,
logger=self.logger.getChild('serial'))
# Restarts
rmethods = {m: m for m in [None, 'arduino', 'command', 'rpi_usb']}
self._restart_method = config.getchoice('restart_method', rmethods,
None)
if baud == 0:
self._restart_method = 'command'
self._reset_cmd = self._config_reset_cmd = None
self._emergency_stop_cmd = None
self._is_shutdown = self._is_timeout = False
self._shutdown_msg = ""
# Config building
printer.lookup_object('pins').register_chip(self._name, self)
self._oid_count = 0
self._config_objects = []
self._init_cmds = []
self._config_cmds = []
self._config_crc = None
self._pin_map = config.get('pin_map', None)
self._custom = config.get('custom', '')
self._mcu_freq = 0.
# Move command queuing
ffi_main, self._ffi_lib = chelper.get_ffi()
self._max_stepper_error = config.getfloat('max_stepper_error',
0.000025,
minval=0.)
self._stepqueues = []
self._steppersync = None
# Stats
self._stats_sumsq_base = 0.
self._mcu_tick_avg = 0.
self._mcu_tick_stddev = 0.
self._mcu_tick_awake = 0.
def main():
usage = "%prog [options] <serialdevice> <baud>"
opts = optparse.OptionParser(usage)
options, args = opts.parse_args()
serialport, baud = args
baud = int(baud)
logging.basicConfig(level=logging.DEBUG)
r = reactor.Reactor()
ser = serialhdl.SerialReader(r, serialport, baud)
kbd = KeyboardReader(ser, r)
try:
r.run()
except KeyboardInterrupt:
sys.stdout.write("\n")
def __init__(self, printer, config):
self._printer = printer
# Serial port
self._serialport = config.get('serial', '/dev/ttyS0')
if self._serialport.startswith("/dev/rpmsg_"):
# Beaglbone PRU
baud = 0
else:
baud = config.getint('baud', 250000, minval=2400)
self.serial = serialhdl.SerialReader(printer.reactor, self._serialport,
baud)
self.is_shutdown = False
self._shutdown_msg = ""
self._timeout_timer = printer.reactor.register_timer(
self.timeout_handler)
self._restart_method = 'command'
if baud:
rmethods = {m: m for m in ['arduino', 'command', 'rpi_usb']}
self._restart_method = config.getchoice('restart_method', rmethods,
'arduino')
# Config building
if printer.bglogger is not None:
printer.bglogger.set_rollover_info("mcu", None)
pins.get_printer_pins(printer).register_chip("mcu", self)
self._emergency_stop_cmd = None
self._reset_cmd = self._config_reset_cmd = None
self._oid_count = 0
self._config_objects = []
self._init_cmds = []
self._config_cmds = []
self._config_crc = None
self._pin_map = config.get('pin_map', None)
self._custom = config.get('custom', '')
# Move command queuing
ffi_main, self._ffi_lib = chelper.get_ffi()
self._max_stepper_error = config.getfloat('max_stepper_error',
0.000025,
minval=0.)
self._stepqueues = []
self._steppersync = None
# Print time to clock epoch calculations
self._print_start_time = 0.
self._mcu_freq = 0.
# Stats
self._stats_sumsq_base = 0.
self._mcu_tick_avg = 0.
self._mcu_tick_stddev = 0.
self._mcu_tick_awake = 0.
def __init__(self, printer, config, clocksync):
self._printer = printer
self._clocksync = clocksync
self._name = config.section
if self._name.startswith('mcu '):
self._name = self._name[4:]
# Serial port
self._serialport = config.get('serial', '/dev/ttyS0')
baud = 0
if not (self._serialport.startswith("/dev/rpmsg_")
or self._serialport.startswith("/tmp/klipper_host_")):
baud = config.getint('baud', 250000, minval=2400)
self._serial = serialhdl.SerialReader(printer.reactor,
self._serialport, baud)
# Restarts
self._restart_method = 'command'
if baud:
rmethods = {m: m for m in ['arduino', 'command', 'rpi_usb']}
self._restart_method = config.getchoice('restart_method', rmethods,
'arduino')
self._reset_cmd = self._config_reset_cmd = None
self._emergency_stop_cmd = None
self._is_shutdown = False
self._shutdown_msg = ""
if printer.bglogger is not None:
printer.bglogger.set_rollover_info(self._name, None)
# Config building
pins.get_printer_pins(printer).register_chip(self._name, self)
self._oid_count = 0
self._config_objects = []
self._init_cmds = []
self._config_cmds = []
self._config_crc = None
self._pin_map = config.get('pin_map', None)
self._custom = config.get('custom', '')
self._mcu_freq = 0.
# Move command queuing
ffi_main, self._ffi_lib = chelper.get_ffi()
self._max_stepper_error = config.getfloat('max_stepper_error',
0.000025,
minval=0.)
self._stepqueues = []
self._steppersync = None
# Stats
self._stats_sumsq_base = 0.
self._mcu_tick_avg = 0.
self._mcu_tick_stddev = 0.
self._mcu_tick_awake = 0.
def __init__(self, printer, config):
self._printer = printer
# Serial port
baud = config.getint('baud', 250000)
self._serialport = config.get('serial', '/dev/ttyS0')
self.serial = serialhdl.SerialReader(printer.reactor, self._serialport,
baud)
self.is_shutdown = False
self._shutdown_msg = ""
self._is_fileoutput = False
self._timeout_timer = printer.reactor.register_timer(
self.timeout_handler)
rmethods = {m: m for m in ['arduino', 'command', 'rpi_usb']}
self._restart_method = config.getchoice('restart_method', rmethods,
'arduino')
# Config building
if printer.bglogger is not None:
printer.bglogger.set_rollover_info("mcu", None)
self._config_error = config.error
self._emergency_stop_cmd = self._reset_cmd = None
self._oids = []
self._config_cmds = []
self._config_crc = None
self._init_callbacks = []
self._pin_map = config.get('pin_map', None)
self._custom = config.get('custom', '')
# Move command queuing
ffi_main, self._ffi_lib = chelper.get_ffi()
self._max_stepper_error = config.getfloat('max_stepper_error',
0.000025,
minval=0.)
self._steppers = []
self._steppersync = None
# Print time to clock epoch calculations
self._print_start_time = 0.
self._mcu_freq = 0.
# Stats
self._stats_sumsq_base = 0.
self._mcu_tick_avg = 0.
self._mcu_tick_stddev = 0.
