def execute(self, module, input):
now = ZonedDateTime.now()
if itemStateOlderThen("Dawn_Time", now) and itemStateNewerThen(
"Dusk_Time", now):
# triggers solar value update
sendCommand("Solar_Total_Yield", REFRESH)
sendCommand("Solar_AC_Power", REFRESH)
acPower = getItemState('Solar_AC_Power').intValue()
dailyConsumption = getItemState("Solar_Daily_Yield").doubleValue()
msg = "{} W, {:.2f} kWh".format(acPower, dailyConsumption)
if itemLastUpdateOlderThen(
"Solar_Total_Yield",
now.minusMinutes(15)) and itemStateOlderThen(
"Dawn_Time", now.minusMinutes(60)):
self.log.error("Solar values not updated")
else:
msg = "Inaktiv"
postUpdateIfChanged("Solar_Message", msg)
def execute(self, module, input):
if getItemState("pOther_Manual_State_Auto_Rollershutter") != ON:
return
contactItemName = input['event'].getItemName()
if contactItemName not in contact_map:
return
config = contact_map[contactItemName]
state = None
if input['event'].getItemState() == OPEN:
state = UP
else:
if getItemState("pOther_Automatic_State_Rollershutter").intValue(
) == SunProtectionHelper.STATE_ROLLERSHUTTER_DOWN:
# check that more windows are DOWN than UP.
#closedShutters = 0
#for _config in configs:
# if getItemState(_config["shutter"]).intValue() == 100:
# closedShutters += 1
#if closedShutters >= math.floor( len(configs) / 2 ):
state = DOWN
elif ("sunprotection" in config
and getItemState(config["sunprotection"]) == ON
and "sunprotectionOnlyIfAway" not in config):
state = DOWN
if state is None:
return
sendCommand(config["shutter"], state)
def updateInfoMessage(self,
infoItem,
temperatureItem,
humidityItem,
co2Item=None,
temperatureTargetItem=None):
#self.log.info(u">>>delay: {}".format(infoItem))
msg = u""
if temperatureTargetItem is not None:
msg = u"{}({}) ".format(
msg,
getItemState(temperatureTargetItem).format("%.1f"))
#self.log.info(temperatureItem)
msg = u"{}{} °C, ".format(msg,
getItemState(temperatureItem).format("%.1f"))
#self.log.info(humidityItem)
msg = u"{}{} %".format(msg, getItemState(humidityItem).format("%.1f"))
if co2Item is not None:
msg = u"{}, {} ppm".format(msg, getItemState(co2Item).format("%d"))
postUpdateIfChanged(infoItem, msg)
self.updateTimer[infoItem] = None
def execute(self, module, input):
if getItemState(
"pOther_Manual_State_Auto_Lighting") == ON and getItemState(
"pOther_Presence_State").intValue(
) == PresenceHelper.STATE_AWAY:
sendCommand("pGF_Corridor_Light_Hue_Color", 30)
sendCommand("pGF_Livingroom_Light_Hue4_Color", 30)
def execute(self, module, input):
if getItemState("pOther_Manual_State_Auto_Rollershutter") != ON:
return
if self.awayTimer != None:
self.awayTimer.cancel()
self.awayTimer = None
if getItemState("pOther_Automatic_State_Rollershutter").intValue() in [
SunProtectionHelper.STATE_ROLLERSHUTTER_DOWN,
SunProtectionHelper.STATE_ROLLERSHUTTER_MAYBE_UP
]:
return
if input['event'].getItemState().intValue(
) == PresenceHelper.STATE_AWAY:
self.presenceTimer = startTimer(self.log,
1800,
self.updateCallback,
args=[DOWN])
elif input['event'].getItemState().intValue(
) == PresenceHelper.STATE_PRESENT and input['event'].getOldItemState(
).intValue() in [
PresenceHelper.STATE_AWAY, PresenceHelper.STATE_MAYBE_PRESENT
]:
self.updateCallback(UP)
def execute(self, module, input):
# we don't want do be notified
if getItemState("pOther_Manual_State_Air_Thoroughly_Notify") != ON:
return
if 'event' in input:
if self.timer != None:
self.timer.cancel()
self.timer = None
if input['event'].getItemState().intValue(
) == PresenceHelper.STATE_PRESENT and input[
'event'].getOldItemState().intValue() in [
PresenceHelper.STATE_AWAY,
PresenceHelper.STATE_MAYBE_PRESENT
]:
# delayed notification to give all devices the chance to be detected as present
self.timer = startTimer(
self.log,
60,
self.process,
args=[PresenceHelper.getPresentRecipients()]) # 1 min
else:
# we are away
if getItemState("pOther_Presence_State").intValue() in [
PresenceHelper.STATE_AWAY,
PresenceHelper.STATE_MAYBE_PRESENT
]:
return
# recipients will be selected only if there are state changes
recipients = None
self.process(recipients)
def execute(self, module, input):
if getItemState(
"pOther_Automatic_State_Sunprotection_Terrace").intValue(
) == SunProtectionHelper.STATE_TERRACE_MAYBE_CLOSED:
pass
elif getItemState(
"pOther_Automatic_State_Sunprotection_Terrace").intValue(
) == SunProtectionHelper.STATE_TERRACE_CLOSED:
# DOWN only if automatic is enabled and (people are present or where present changed recently or terrace door is open)
if (getItemState("pOther_Manual_State_Auto_Sunprotection") == ON
and
(getItemState("pOther_Presence_State").intValue() not in [
PresenceHelper.STATE_AWAY,
PresenceHelper.STATE_MAYBE_PRESENT
] or itemLastChangeNewerThen(
"pOther_Presence_State",
ZonedDateTime.now().minusMinutes(120)) or getItemState(
"pGF_Livingroom_Openingcontact_Window_Terrace_State")
== OPEN)):
#self.log.info(u"down")
sendCommand("pOutdoor_Terrace_Shading_Left_Control", DOWN)
sendCommand("pOutdoor_Terrace_Shading_Right_Control", DOWN)
else:
#self.log.info(u"up")
# UP always when sun protection time is over
sendCommand("pOutdoor_Terrace_Shading_Left_Control", UP)
sendCommand("pOutdoor_Terrace_Shading_Right_Control", UP)
def confirmArriving(self):
presenceState = getItemState("pOther_Presence_State").intValue()
if presenceState != PresenceHelper.STATE_MAYBE_PRESENT:
return
newestUpdate = None
for item in getItem("gSensor_Indoor").getAllMembers():
if getItemState(item) == OPEN:
newestUpdate = ZonedDateTime.now()
break
_update = getItemLastUpdate(item)
if newestUpdate == None or _update.isAfter(newestUpdate):
newestUpdate = _update
ref = ZonedDateTime.now().minusSeconds(7)
self.isConfirmed = newestUpdate.isAfter(ref) or newestUpdate.isEqual(
ref)
if self.isConfirmed:
self.delayedAwayCheck()
else:
self.setAway(False)
self.confirmTimer = None
def getPresentRecipients():
recipients = []
if getItemState("pOther_Presence_Holger_State") == OnOffType.ON:
recipients.append('bot_holger')
if getItemState("pOther_Presence_Sandra_State") == OnOffType.ON:
recipients.append('bot_sandra')
return recipients
def execute(self, module, input):
if getItemState("pOther_Manual_State_Notify") != ON:
return
state = getItemState("pOther_Presence_State").intValue()
if state in [PresenceHelper.STATE_AWAY, PresenceHelper.STATE_SLEEPING]:
itemName = input['event'].getItemName()
item = getItem(itemName)
location = self.getLocation(item)
if "Door" in itemName:
msg = u"Tür im {} {}".format(
location.getLabel(), u"offen" if
input['event'].getItemState() == OPEN else u"geschlossen")
elif "Window" in itemName:
msg = u"Fenster im {} {}".format(
location.getLabel(), u"offen" if
input['event'].getItemState() == OPEN else u"geschlossen")
elif "Motiondetector" in itemName:
if input['event'].getItemState() == CLOSED:
return
# during sleep, ignore moving detection
if state == PresenceHelper.STATE_SLEEPING:
return
msg = u"Bewegung im {} erkannt".format(location.getLabel())
#self.log.info(u"{} {} {} {}".format(group,itemName,item.getLabel(),location.getLabel()))
sendNotification(u"Alarm", u"{}".format(msg))
def execute(self, module, input):
moverStatus = getItemState("pOutdoor_Mower_Status").toString()
if itemLastUpdateOlderThen("pOutdoor_Mower_WlanSignal",
ZonedDateTime.now().minusMinutes(60)):
if moverStatus != "98":
postUpdate("pOutdoor_Mower_Status", 98)
postUpdate(
"pOutdoor_Mower_StatusFormatted",
Transformation.transform("MAP", "robonect_status.map",
"98"))
else:
seconds = getItemState("pOutdoor_Mower_Duration").intValue()
hours = seconds / (60 * 60)
seconds = seconds % (60 * 60)
minutes = seconds / 60
#seconds = seconds % 60
msg = u"{} seit ".format(
Transformation.transform("MAP", "robonect_status.map",
moverStatus))
if hours < 10: msg = u"{}0".format(msg)
msg = u"{}{}:".format(msg, hours)
if minutes < 10: msg = u"{}0".format(msg)
msg = u"{}{}:".format(msg, minutes)
postUpdateIfChanged("pOutdoor_Mower_StatusFormatted", msg)
def execute(self, module, input):
active = []
group = "Fehler"
ventilation_state = getItemState(
"pGF_Utilityroom_Ventilation_State_Message").toString()
if ventilation_state != "Alles ok":
if ventilation_state == "Filter":
active.append(u"Filter")
else:
active.append(u"Lüftung")
if getItemState("pGF_Utilityroom_Heating_State_Message").toString(
) != "Alles ok":
active.append(u"Heizung")
if getItemState("pGF_Garage_Solar_Inverter_Is_Working") == OFF:
active.append(u"Solar")
if getItemState("State_Server").intValue() > 1:
active.append(u"Server")
if len(active) == 0:
active.append(u"Alles ok")
group = "Info"
msg = u", ".join(active)
if postUpdateIfChanged("pOther_State_Message_Main", msg):
sendNotificationToAllAdmins("Main " + group, msg)
def delayUpdate(self):
msg = u"{}%, {}%".format(
getItemState("pGF_Utilityroom_Heating_Power").format("%.0f"),
getItemState("pGF_Utilityroom_Heating_Circuit_Pump_Speed").format(
"%.0f"))
postUpdateIfChanged("pGF_Utilityroom_Heating_Power_Message", msg)
self.updateTimer = None
def execute(self, module, input):
now = ZonedDateTime.now()
currentErtrag = getItemState("Solar_Annual_Yield").doubleValue()
currentEinspeisung = getItemState(
"Electric_VZ_Jahreseinspeisung").doubleValue()
postUpdateIfChanged("Solar_Annual_Consumption",
currentErtrag - currentEinspeisung)
def delayUpdate(self):
msg = u"{}°C, {}°C".format(
getItemState("pGF_Utilityroom_Heating_Temperature_Offset").format(
"%.1f"),
getItemState("pGF_Utilityroom_Heating_Temperature_Offset_Target").
format("%.1f"))
postUpdateIfChanged(
"pGF_Utilityroom_Heating_Temperature_Offset_Message", msg)
self.updateTimer = None
def findStep(self):
duration = getItemState(
"pOutdoor_Watering_Logic_Program_Duration").intValue() * 60.0
remaining = 0
info = u""
# detect current active index
activeIndex = -1
for i in range(len(circuits)):
group = circuits[i]
if getItemState(group[2][0] + "_Powered") == ON:
activeIndex = i
runtime = ChronoUnit.SECONDS.between(
getItemLastChange(group[2][0] + "_Powered"),
ZonedDateTime.now())
remaining = (duration * group[0]) - runtime
break
if remaining <= 0:
nextIndex = -1
# detect next index
for i in range(len(circuits)):
if activeIndex != -1 and i <= activeIndex:
continue
group = circuits[i]
for circuit in group[2]:
if getItemState(circuit + "_Auto") == ON:
nextIndex = i
break
if nextIndex != -1:
break
if nextIndex == -1:
self.disableAllCircuits()
postUpdate("pOutdoor_Watering_Logic_Program_Start", OFF)
else:
for circuit in circuits[nextIndex][2]:
if getItemState(circuit + "_Auto") == ON:
sendCommand(circuit + "_Powered", ON)
nextGroup = circuits[nextIndex]
remaining = (duration * nextGroup[0])
info = nextGroup[1]
# deactivate current index
if activeIndex != -1:
for circuit in circuits[activeIndex][2]:
sendCommand(circuit + "_Powered", OFF)
else:
info = circuits[activeIndex][1]
return [info, remaining]
def execute(self, module, input):
now = ZonedDateTime.now()
currentSupply = getItemState(
"pGF_Utilityroom_Electricity_Total_Supply").doubleValue()
currentYield = getItemState(
"pGF_Garage_Solar_Inverter_Total_Yield").doubleValue()
# Tagesverbrauch
startSupply = getHistoricItemState(
"pGF_Utilityroom_Electricity_Total_Supply",
now.toLocalDate().atStartOfDay(now.getZone())).doubleValue()
startYield = getHistoricItemState(
"pGF_Garage_Solar_Inverter_Total_Yield",
now.toLocalDate().atStartOfDay(now.getZone())).doubleValue()
# sometimes solar converter is providing wrong value. Mostly if he is inactive in the night
if currentYield > 1000000000 or startYield > 1000000000:
# can be INFO because it is a 'normal' behavior of this solar converter
self.log.info(
u"Wrong Solar Value: currentYield is {}, startYield is {}".
format(currentYield, startYield))
return
totalSupply = currentSupply - startSupply
totalYield = currentYield - startYield
dailyConsumption = totalYield - totalSupply
postUpdateIfChanged("pGF_Garage_Solar_Inverter_Daily_Yield",
totalYield)
#self.log.info(u"A {} {}".format(currentSupply,currentYield))
#self.log.info(u"B {} {}".format(startSupply,startYield))
#self.log.info(u"C {} {}".format(totalSupply,totalYield))
postUpdateIfChanged("pGF_Garage_Solar_Inverter_Daily_Consumption",
dailyConsumption)
# Jahresverbrauch
refDay = now.withYear(now.getYear()).withMonth(1).withDayOfMonth(1)
refDate = refDay.toLocalDate().atStartOfDay(refDay.getZone())
startSupply = getHistoricItemState(
"pGF_Utilityroom_Electricity_Total_Supply", refDate).doubleValue()
startYield = getHistoricItemState(
"pGF_Garage_Solar_Inverter_Total_Yield", refDate).doubleValue()
totalSupply = currentSupply - startSupply
totalYield = currentYield - startYield
annualConsumption = totalYield - totalSupply
#self.log.info(u"D {} {}".format(startSupply,startYield))
#self.log.info(u"E {}".format(annualConsumption))
postUpdateIfChanged("pGF_Garage_Solar_Inverter_Annual_Consumption",
annualConsumption)
def execute(self, module, input):
msg = u"Nicht aktiv"
if getItemState(
"pOther_Manual_State_Auto_Attic_Light").intValue() != 1:
soilMoistSensor1 = getItemState(
"pIndoor_Plant_Sensor_Device_State1").intValue(
) if getItemState(
"pIndoor_Plant_Sensor_Device_Enabled1") == ON else 1000
soilMoistSensor2 = getItemState(
"pIndoor_Plant_Sensor_Device_State2").intValue(
) if getItemState(
"pIndoor_Plant_Sensor_Device_Enabled2") == ON else 1000
soilMoistSensor3 = getItemState(
"pIndoor_Plant_Sensor_Device_State3").intValue(
) if getItemState(
"pIndoor_Plant_Sensor_Device_Enabled3") == ON else 1000
soilMoistSensor4 = getItemState(
"pIndoor_Plant_Sensor_Device_State4").intValue(
) if getItemState(
"pIndoor_Plant_Sensor_Device_Enabled4") == ON else 1000
if soilMoistSensor1 < 380 or soilMoistSensor2 < 380 or soilMoistSensor3 < 380 or soilMoistSensor4 < 380:
msg = u"Jetzt Giessen"
elif soilMoistSensor1 < 400 or soilMoistSensor2 < 400 or soilMoistSensor3 < 400 or soilMoistSensor4 < 400:
msg = u"Giessen"
else:
msg = u"Feucht genug"
postUpdateIfChanged("pIndoor_Plant_Sensor_Watering_Info", msg)
def delayUpdate(self):
solarCollector = getItemState(
"pGF_Utilityroom_Heating_Temperature_Solar_Collector")
solarStorage = getItemState(
"pGF_Utilityroom_Heating_Temperature_Solar_Storage")
msg = u"{}°C, {}°C".format(solarCollector.format("%.1f"),
solarStorage.format("%.1f"))
postUpdateIfChanged(
"pGF_Utilityroom_Heating_Temperature_Solar_Message", msg)
self.updateTimer = None
def execute(self, module, input):
dailyEnergyDemand = getItemState(
"pGF_Utilityroom_Electricity_Current_Daily_Demand").doubleValue()
dailyEnergySupply = getItemState(
"pGF_Utilityroom_Electricity_Current_Daily_Supply").doubleValue()
dailySolarSupply = getItemState(
"pGF_Garage_Solar_Inverter_Daily_Yield").doubleValue()
postUpdateIfChanged(
"pGF_Utilityroom_Electricity_Current_Daily_Consumption",
dailyEnergyDemand - dailyEnergySupply + dailySolarSupply)
def delayUpdate(self):
if isinstance(getItemState("pGF_Utilityroom_Ventilation_Incoming"), UnDefType) \
or isinstance(getItemState("pGF_Utilityroom_Ventilation_Outgoing"), UnDefType):
return
msg = u"→ {}%, ← {}%".format(
getItemState("pGF_Utilityroom_Ventilation_Incoming").toString(),
getItemState("pGF_Utilityroom_Ventilation_Outgoing").toString())
postUpdateIfChanged("pGF_Utilityroom_Ventilation_Fan_Message", msg)
self.updateTimer = None
def delayUpdate(self):
msg = u"({}°C) {}°C, {}°C".format(
getItemState("pOutdoor_Weather_Forecast_Temperature_4h").format(
"%.1f"),
getItemState("pGF_Utilityroom_Heating_Temperature_Outdoor").format(
"%.1f"),
getItemState("pGF_Utilityroom_Heating_Temperature_Outdoor_Subdued"
).format("%.1f"))
postUpdateIfChanged(
"pGF_Utilityroom_Heating_Temperature_Outdoor_Message", msg)
self.updateTimer = None
def _getCurrentColors(self):
color1 = getItemState(
"pGF_Livingroom_Light_Hue1_Color").toString().split(",")
color2 = getItemState(
"pGF_Livingroom_Light_Hue2_Color").toString().split(",")
color3 = getItemState(
"pGF_Livingroom_Light_Hue3_Color").toString().split(",")
color4 = getItemState(
"pGF_Livingroom_Light_Hue4_Color").toString().split(",")
color5 = getItemState(
"pGF_Livingroom_Light_Hue5_Color").toString().split(",")
return [color1, color2, color3, color4, color5]
def execute(self, module, input):
reference_duration = getItemState(
"pOutdoor_Watering_Logic_Program_Duration").intValue()
for i in range(len(circuits)):
for circuit in circuits[i][2]:
if getItemState(circuit + "_Auto") == ON:
duration = (circuits[i][0] * reference_duration)
duration = int(math.floor(duration))
postUpdate(circuit + "_Info", u"{} min.".format(duration))
else:
postUpdate(circuit + "_Info", u"inaktiv")
def execute(self, module, input):
if getItemState("pOther_Manual_State_Auto_Rollershutter") != ON:
return
if getItemState("pOther_Automatic_State_Rollershutter").intValue(
) == SunProtectionHelper.STATE_ROLLERSHUTTER_DOWN:
for config in configs:
if getItemState(config["contact"]) != CLOSED:
continue
sendCommand(config["shutter"], DOWN)
elif getItemState("pOther_Presence_State").intValue(
) == PresenceHelper.STATE_AWAY and getItemState(
"pOther_Automatic_State_Rollershutter").intValue(
) == SunProtectionHelper.STATE_ROLLERSHUTTER_UP:
sendCommand("gShutters", UP)
def execute(self, module, input):
active = []
if getItemState("gOutdoor_Watering_Circuits") == ON:
active.append(u"Bewässerung")
if getItemState("pOutdoor_Light_Automatic_Main_Switch") != ON:
active.append(u"Beleuchtung")
if len(active) == 0:
active.append(u"Alles ok")
msg = ", ".join(active)
postUpdateIfChanged("pOther_State_Message_Garden", msg)
def callbackProgress(self):
if self.progressTimer is not None and self.currentProgressMsg != getItemState(
"pOutdoor_Watering_Logic_Program_State").toString():
self.log.info("Cancel Watering Progress Zombie Timer")
self.cleanProgressTimer()
return
msg, remaining = self.findStep()
if remaining <= 0:
self.cleanProgressTimer()
return
remainingInMinutes = int(math.floor(remaining / 60.0))
if remainingInMinutes > 0:
msg = u"{} noch {} min".format(msg, remainingInMinutes)
else:
msg = u"{} gleich fertig".format(msg)
self.currentProgressMsg = msg
postUpdate("pOutdoor_Watering_Logic_Program_State",
self.currentProgressMsg)
self.progressTimer = startTimer(self.log, 60.0, self.callbackProgress)
def updateCallback(self, state):
for config in configs:
# handle only shutters which depends on presence state
if "sunprotectionOnlyIfAway" not in config:
continue
if state == DOWN:
if getItemState(config["contact"]) != CLOSED:
continue
if getItemState(config["sunprotection"]) != ON:
continue
sendCommandIfChanged(config["shutter"], state)
self.awayTimer = None
def delayUpdate(self):
if isinstance(getItemState("pGF_Utilityroom_Ventilation_Indoor_Incoming_Temperature"), UnDefType) \
or isinstance(getItemState("pGF_Utilityroom_Ventilation_Indoor_Outgoing_Temperature"), UnDefType):
return
msg = u"→ {}°C, ← {}°C".format(
getItemState(
"pGF_Utilityroom_Ventilation_Indoor_Incoming_Temperature").
format("%.1f"),
getItemState(
"pGF_Utilityroom_Ventilation_Indoor_Outgoing_Temperature").
format("%.1f"))
postUpdateIfChanged(
"pGF_Utilityroom_Ventilation_Indoor_Temperature_Message", msg)
self.updateTimer = None
def execute(self, module, input):
global ruleTimeouts
now = ZonedDateTime.now()
#last = ruleTimeouts.get("Motiondetector_Outdoor_Individual_Switches",0)
#if now - last > 1000:
ruleTimeouts["Motiondetector_Outdoor_Main_Switch"] = now
ruleTimeouts["Light_Outdoor"] = now
itemName = input['event'].getItemName()
itemCommand = input['event'].getItemCommand()
switchState = ON
for i, entry in enumerate(manualMappings):
if entry[1] == itemName:
sendCommandIfChanged(entry[0], OFF)
if itemCommand == OFF:
switchState = OFF
else:
if getItemState(entry[1]) == OFF:
switchState = OFF
# must be a command to inform physical knx switch
sendCommandIfChanged("pOutdoor_Light_Automatic_Main_Switch",
switchState)