def read(self):
try:
sht_sensor = Sht(self.clock_pin, self.pin, voltage=self.voltage)
self._temperature = sht_sensor.read_t()
self._humidity = sht_sensor.read_rh()
except:
return None
#!/usr/bin/python
import datetime
import time
from sht_sensor import Sht
sht = Sht(4, 17)
for x in range(0, 10):
temperature = sht.read_t()
humidity = sht.read_rh(temperature)
dew_point = sht.read_dew_point(temperature, humidity)
print "Temperature: %s" % temperature
print "Humidity: %s" % humidity
print "Dew Point: " % dew_point
time.sleep(2)
#!/usr/bin/python from sht_sensor import Sht sht = Sht(4, 17) print "temp:", sht.read_t() print "rh:", sht.read_rh()
BOARD_MODE = gpio.BCM
# GPIO board mode
PIN_DHT = 17
# Pin für Temp/Hum Sensor
PIN_HEATER = 27
# Pin für Heizkabel
PIN_COOL = 22
# Pin für Kühlschrankkompressor
PIN_FAN = 18
# Pin für Umluftventilator
PIN_FAN1 = 23
# Pin für Austauschlüfter
PIN_HUM = 24
# Pin für Luftbefeuchter
sht = Sht(21, 20)
VERBOSE = True
#RRD-Tool konfiguration
dbname = 'dht22' # Name fuer Grafiken etc
filename = dbname + '.rrd' # Dateinamen mit Endung
steps = 10 # Zeitintervall fuer die Messung in Sekunden
i = 0
z = 0
# Funktionen ############################################################################################################
########################################################################################################################
def goodbye():
cleanup()
"""Specific module to calculate relative humidity with the sensor"""
import json
from sht_sensor import Sht
with open('sensorConfig.json') as json_file:
FILE_DATA = json.load(json_file)
SHT = Sht(FILE_DATA["sht sensor pin numbers 1"],
FILE_DATA["sht sensor pin numbers 2"])
class RelativeHumidity(object):
"""Relative Humidity Sensor GPIO pin 11 and 13"""
def __init__(self):
""""""
def relative_humidity(self):
"""Specific method to get relative humidity in %RH"""
return SHT.read_rh()
class SHT1x7xSensor(AbstractInput):
"""
A sensor support class that measures the SHT1x7x's humidity and temperature
and calculates the dew point
"""
def __init__(self, input_dev, testing=False):
super(SHT1x7xSensor, self).__init__()
self.logger = logging.getLogger("mycodo.inputs.sht1x_7x")
self._dew_point = None
self._humidity = None
self._temperature = None
if not testing:
from sht_sensor import Sht
from sht_sensor import ShtVDDLevel
self.logger = logging.getLogger(
"mycodo.inputs.sht1x_7x_{id}".format(id=input_dev.id))
self.location = int(input_dev.location)
self.clock_pin = input_dev.clock_pin
self.convert_to_unit = input_dev.convert_to_unit
sht_sensor_vdd_value = {
2.5: ShtVDDLevel.vdd_2_5,
3.0: ShtVDDLevel.vdd_3,
3.5: ShtVDDLevel.vdd_3_5,
4.0: ShtVDDLevel.vdd_4,
5.0: ShtVDDLevel.vdd_5
}
self.sht_voltage = sht_sensor_vdd_value[round(
float(input_dev.sht_voltage), 1)]
self.sht_sensor = Sht(self.clock_pin,
self.location,
voltage=self.sht_voltage)
def __repr__(self):
""" Representation of object """
return "<{cls}(dewpoint={dpt})(humidity={hum})(temperature={temp})>".format(
cls=type(self).__name__,
dpt="{0:.2f}".format(self._dew_point),
hum="{0:.2f}".format(self._humidity),
temp="{0:.2f}".format(self._temperature))
def __str__(self):
""" Return measurement information """
return "Dew Point: {dpt}, Humidity: {hum}, Temperature: {temp}".format(
dpt="{0:.2f}".format(self._dew_point),
hum="{0:.2f}".format(self._humidity),
temp="{0:.2f}".format(self._temperature))
def __iter__(self): # must return an iterator
""" SHT1x7xSensor iterates through live measurement readings """
return self
def next(self):
""" Get next measurement reading """
if self.read(): # raised an error
raise StopIteration # required
return dict(dewpoint=float('{0:.2f}'.format(self._dew_point)),
humidity=float('{0:.2f}'.format(self._humidity)),
temperature=float('{0:.2f}'.format(self._temperature)))
@property
def dew_point(self):
""" SHT1x7x dew point in Celsius """
if not self._dew_point: # update if needed
self.read()
return self._dew_point
@property
def humidity(self):
""" SHT1x7x relative humidity in percent """
if not self._humidity: # update if needed
self.read()
return self._humidity
@property
def temperature(self):
""" SHT1x7x temperature in Celsius """
if self._temperature is None: # update if needed
self.read()
return self._temperature
def get_measurement(self):
""" Gets the humidity and temperature """
self._dew_point = None
self._humidity = None
self._temperature = None
temperature = convert_units('temperature', 'celsius',
self.convert_to_unit,
self.sht_sensor.read_t())
humidity = self.sht_sensor.read_rh()
dew_point = self.sht_sensor.read_dew_point(temperature, humidity)
dew_point = convert_units('dewpoint', 'celsius', self.convert_to_unit,
dew_point)
return dew_point, humidity, temperature
def read(self):
"""
Takes a reading from the SHT1x7x and updates the self.dew_point,
self._humidity, and self._temperature values
:returns: None on success or 1 on error
"""
try:
(self._dew_point, self._humidity,
self._temperature) = self.get_measurement()
if self._dew_point is not None:
return # success - no errors
except Exception as e:
self.logger.exception(
"{cls} raised an exception when taking a reading: "
"{err}".format(cls=type(self).__name__, err=e))
return 1
#!/usr/bin/env python # -*- coding: utf-8 -*- # Uso CRONTAB -e per editare ed eseguire il programma import RPi.GPIO as GPIO # access to GPIO must be through root import time import sys import datetime #from sht_sensor import Sht from sht_sensor import Sht sht = Sht(21, 17) # sensore della Sensitron SHT75 LATCH = 11 # CS GP11 pin 23 CLK = 12 # CLOCK GP12 pin 32 dataBit = 7 # DIN GP07 pin 26 #Definiamo il sistema di riferimento dei pin. Con GPIO.BCM usiamo i numeri GPIO dei pin e non # il numero dei pin. # Ad esempio con GPIO.setmode(GPIO.BCM) per riferirci al pin GPIO17, usiamo 17 (e non 11). #Per indicare che ci si riferisce al numero del pin, si usa GPIO.setmode(GPIO.BOARD) GPIO.setmode(GPIO.BCM) #usiamo la numerazione BCM GPIO.setwarnings(False) GPIO.setup(LATCH, GPIO.OUT) # P0 11 GPIO.setup(CLK, GPIO.OUT) # P1 12 GPIO.setup(dataBit, GPIO.OUT) # P7 7 #------------------------------------------------------------------------------- GPIO.output(LATCH, 0) # Setup IO GPIO.output(CLK, 0)
def print_serial(self, buffer):
sht = Sht(3, 2)
s = datetime.datetime.now()
#self.n+=1
chksum = self.chksum_cal(buffer)
data = self.unpack_data(buffer)
a = data[self.DUST_PM1_0_CF1]
b = data[self.DUST_PM1_0_ATM]
c = data[self.DUST_PM2_5_CF1]
d = data[self.DUST_PM2_5_ATM]
e = data[self.DUST_PM10_0_CF1]
f = data[self.DUST_PM10_0_ATM]
g = data[self.DUST_AIR_0_3]
h = data[self.DUST_AIR_0_5]
i = data[self.DUST_AIR_1_0]
j = data[self.DUST_AIR_2_5]
k = data[self.DUST_AIR_5_0]
l = data[self.DUST_AIR_10_0]
#print(s,a,b,c,d,e,f,g,h,i,j,k,l)
self.input_parameter = [
d, round(sht.read_t(), 3),
round(sht.read_rh(), 3)
]
self.input_parameter = np.array([self.input_parameter])
self.input_parameter = scaler.transform(self.input_parameter)
# self.t+=[[model.predict(self.input_parameter),d,round(sht.read_t(),3),round(sht.read_rh(),3)]]
self.ai = float(model.predict(self.input_parameter))
#print(s,a,b,c,round(sht.read_t(),3),round(sht.read_rh(),3))
# print (data[self.DUST_PM1_0_CF1], data[self.DUST_PM1_0_ATM])
# print (data[self.DUST_PM2_5_CF1], data[self.DUST_PM2_5_ATM])
# print (data[self.DUST_PM10_0_CF1], data[self.DUST_PM10_0_ATM])
# print ("0.3um in 0.1L of air : %s" % (data[self.DUST_AIR_0_3]))
# print ("0.5um in 0.1L of air : %s" % (data[self.DUST_AIR_0_5]))
# print ("1.0um in 0.1L of air : %s" % (data[self.DUST_AIR_1_0]))
# print ("2.5um in 0.1L of air : %s" % (data[self.DUST_AIR_2_5]))
# print ("5.0um in 0.1L of air : %s" % (data[self.DUST_AIR_5_0]))
# print ("10.0um in 0.1L of air : %s" % (data[self.DUST_AIR_10_0]))
# print ("Reserved F : %s | Reserved B : %s" % (data[self.RESERVEDF],data[self.RESERVEDB]))
# print ("CHKSUM : %s | read CHKSUM : %s | CHKSUM result : %s" % (chksum, data[self.CHECKSUM], chksum == data[self.CHECKSUM]))
# print ("============================================================================")
self.n += 1
try:
ser6.write(serial.to_bytes([0x02, 0x52, 0x00, 0x00, 0x03]))
send1 = "0252000003"
#send1=int(send1,16)
#send1=send1.encode('utf-8')
#byteToRead1 = ser6.inWaiting()
s = ser6.readline()
s = str(s)
s = s.split(',')
print(s)
# gas=s[1]+","+s[2]+","+s[3]+","+s[4]+","+s[6]+","+s[7]+model.predict(self.input_parameter)+","+d+","+sht.read_t()+","+sht.read_rh()
# print(gas)
time_now = datetime.datetime.now()
self.send = str(
"AI PM 2.5 :" + str(round(self.ai, 2))
) + ", Raw PM 2.5 :" + str(round(d, 2)) + ", Temp :" + str(
round(sht.read_t(), 2)) + ", Humidity :" + str(
round(sht.read_rh(), 2)) + ", CO :" + str(
round(float(s[1]) / 1.2, 2)
) + ", SO2 :" + s[2] + ", H2S :" + s[3] + ", VOC: " + str(
round(float(s[4]) / 3.5,
2)) + ", NO2: " + s[6] + ", O3: " + s[7] + "\r\n"
self.send2 = str(time_now) + " , " + str(
"AI PM 2.5 :" + str(round(self.ai, 2))
) + ", Raw PM 2.5 :" + str(round(d, 2)) + ", Temp :" + str(
round(sht.read_t(), 2)) + ", Humidity :" + str(
round(sht.read_rh(), 2)) + ", CO :" + str(
round(float(s[1]) / 1.2, 2)
) + ", SO2 :" + s[2] + ", H2S :" + s[3] + ", VOC: " + str(
round(float(s[4]) / 3.5,
2)) + ", NO2: " + s[6] + ", O3: " + s[7]
#str(float(s[4])/0.01+float(s[7]))
self.send = self.send.encode('utf-8')
#time.sleep(10)
ser.write(self.send)
print(time_now)
# ser.write(s)
#ser.write(self.send)
#print(self.send)
#print(ser6.isOpen())
self.t += [[str(self.send2)]]
self.n += 1
ser6.write(serial.to_bytes([0x02, 0x53, 0x00, 0x00, 0x03]))
except:
print('connect error \n')
if self.n == 2:
print("it's start")
# if self.n==5:
# print(self.n)
# df=pd.DataFrame(self.t)
# path="/home/mems/Desktop/test/"+datetime.datetime.now().strftime("%Y-%m-%d-%H-%M-%S")+".csv"
# df.to_csv(path)
# print(self.n,"seconds _and save file")
if self.n % 100 == 0:
#print(self.n)
df = pd.DataFrame(self.t)
path = "/home/omni/Desktop/test2/" + datetime.datetime.now(
).strftime("%Y-%m-%d-%H-%M-%S") + ".csv"
df.to_csv(path)
#print(self.n,"seconds _and save file")
self.t = []
def __init__(self, name, data, clock):
self.name = name
self.sht = Sht(data, clock, voltage="5V")
sht_vcc_pin = 5
sht_data_pin = 13
sht_sck_pin = 6
ir_pin_out = 23
# make sure sht15 sclk is set to low -- is required before power up
wiringpi.digitalWrite(sht_sck_pin, 0)
# power cycle sht_vcc_pin just in case
wiringpi.digitalWrite(sht_vcc_pin, 0)
sleep(3)
# open 3.3v power pin to power up sht15 temp and humidity sensor... using phyiscal pin values (no "_g")
wiringpi.pinMode(sht_vcc_pin, 1)
wiringpi.digitalWrite(sht_vcc_pin, 1)
# identify the SHT15's "sck" and "data" pins (using GPIO numbering, i..e the "_g" values), and VDD input voltage
sht = Sht(sht_sck_pin, sht_data_pin, voltage='3.5V')
# print initial
f = open(FILENAME, "a")
f.write("NA, NA, NA,NA\n")
f.close()
# loop that takes exactly 1 second to execute
i = 0
while True:
if wiringpi.digitalRead(ir_pin_out) == 1:
dt = datetime.datetime.now()
while True:
i += 1
# Read SHT temp and RH
dt_clk = datetime.datetime.now()
# Sends temperature and humidity data to Thingspeak from a SHT sensor connected to Raspberry # Requires sht-sensor library to be installed # Sends data in every 10 mins: # crontab -e # */10 * * * * /usr/bin/python /home/pi/sht_thingspeak.py # The connections are SCK pin: GPIO 21, DATA pin: GPIO 17 # tamasharasztosi, 2018 import sys import time import RPi.GPIO as GPIO from time import sleep from sht_sensor import Sht import urllib2 myAPI = "FILL_WITH_YOUR_API" sht = Sht(21, 18) # SCK pin: GPIO 21, DATA pin: GPIO 17 print 'Temperature', sht.read_t() print 'Relative Humidity', sht.read_rh() baseURL = 'https://api.thingspeak.com/update?api_key=FILL_WITH_YOUR_API' urllib2.urlopen(baseURL + "&field1=%s&field2=%s" % (sht.read_t(), sht.read_rh())).read()
