def main(quit=True):
global t
c = MQTTClient(CLIENT_ID, SERVER)
# Subscribed messages will be delivered to this callback
c.set_callback(sub_cb)
c.connect()
c.subscribe(TOPIC, qos=QOS)
print("Connected to %s, subscribed to %s topic" % (SERVER, TOPIC))
n = 0
pubs = 0
try:
while 1:
n += 1
if not n % 100:
t = ticks_ms()
c.publish(TOPIC,
str(pubs).encode('UTF8'),
retain=False,
qos=QOS)
c.wait_msg()
pubs += 1
if not pubs % 100:
print('echo received in max {} ms min {} ms'.format(
maxt, mint))
if quit:
return
sleep(0.05)
c.check_msg()
finally:
c.disconnect()
def mqtt_onenet(server=SERVER):
c = MQTTClient(CLIENT_ID, server, 6002, username, password)
strftime = "%04u-%02u-%02uT%02u:%02u:%02u" % time.localtime()[0:6]
msg1 = b'Hello #%s' % (strftime)
c.connect()
c.publish(b"ttt",msg1)
c.disconnect()
def main(server=SERVER):
c = MQTTClient(CLIENT_ID, server)
c.connect()
print("Connected to %s, waiting for timer" % server)
fail = False
count = 0
while True:
count += 1
time.sleep_ms(5000)
value = str(adc.read())
print("Time to publish")
try:
if fail:
print('Attempt to reconnect')
c.connect()
print('Reconnected to Huzzah')
except OSError:
print('Reconnect fail')
try:
c.publish(TOPIC, (value + ' count ' + str(count)).encode('UTF8'))
print('Publish ' + value)
fail = False
except OSError:
fail = True
c.disconnect()
def main(quit=True):
global t
c = MQTTClient(CLIENT_ID, SERVER)
# Subscribed messages will be delivered to this callback
c.set_callback(sub_cb)
c.connect()
c.subscribe(TOPIC, qos = QOS)
print("Connected to %s, subscribed to %s topic" % (SERVER, TOPIC))
n = 0
pubs = 0
try:
while 1:
n += 1
if not n % 100:
t = ticks_ms()
c.publish(TOPIC, str(pubs).encode('UTF8'), retain = False, qos = QOS)
c.wait_msg()
pubs += 1
if not pubs % 100:
print('echo received in max {} ms min {} ms'.
format(maxt, mint))
if quit:
return
sleep(0.05)
c.check_msg()
finally:
c.disconnect()
def main():
global NEW_DATA_FLAG
# 初始化定时器
tim.init(period=10000, mode=Timer.PERIODIC, callback=temprature_measure)
# 初始化MQTT客户端
client = MQTTClient(CLIENTID, SERVER, PORT, USERNAME, PSW)
client.set_callback(subscribe_callback)
client.connect()
client.subscribe(TOPIC_DOWNLINK)
print("Connected to MQTT server: %s, topic:%s" % (SERVER, TOPIC_DOWNLINK))
try:
while True:
# 主循环
client.check_msg()
if NEW_DATA_FLAG:
led.off()
msg = "T:%s,H:%s" % (dht.temperature(), dht.humidity())
tem = "%s" % (dht.temperature())
humi = "%s" % (dht.humidity())
client.publish(TOPIC_UPLINK_T, tem)
client.publish(TOPIC_UPLINK_H, humi)
print("Send MSG: -> TOPIC:%s MSG:%s" % ("REMIX_TOPIC", msg))
NEW_DATA_FLAG = False
led.on()
time.sleep_ms(100)
finally:
client.disconnect()
def read_send():
instruction(light_on)
data_frame = instruction(read_instruct)
if data_frame[0] == 255 and data_frame[1] == 135:
data_g = (data_frame[2] * 256 + data_frame[3]) / 1000
data_t = (data_frame[8] << 8 | data_frame[9]) / 100
data_h = (data_frame[10] << 8 | data_frame[11]) / 100
dataframe = {
"params": {
"data_g": data_g,
"data_t": data_t,
"data_h": data_h
}
}
tvoc_mqtt = MQTTClient(client_id=mqttClientId,
server=server,
port=port,
user=mqttUsername,
password=mqttPassword,
keepalive=60)
tvoc_mqtt.set_callback(callback)
tvoc_mqtt.connect()
time.sleep(1)
tvoc_mqtt.publish(topic_p, json.dumps(dataframe))
time.sleep(1)
tvoc_mqtt.subscribe(topic_s)
time.sleep(1)
def send_mq():
h, t = do_dht()
print("h=%s,t=%s" % (h, t))
m = MQTTClient('nodemcu', '192.168.1.112')
m.connect()
m.publish('hh', h)
time.sleep(0.2)
m.publish('tt', t)
m.disconnect()
def publish_msg(topic, msg):
if topic and msg:
try:
c = MQTTClient("umqtt_client", "0.0.0.0")
c.connect()
c.publish(topic, msg)
c.disconnect()
except Exception as e:
print(e)
time.sleep(3)
machine.idle()
def publishMessage(clientID, serverIP, username, password, topicName, message):
try:
c = MQTTClient(clientID, serverIP,1883,username,password)
if ( 0 == c.connect() ):
c.publish(topicName, message, False)
c.disconnect()
print("publish ok")
else:
print("connect failed")
except Exception:
print("publishMessage failed")
def msg_Pub():
global c
server = SERVER
c = MQTTClient(CLIENT_ID, server, 1883, username, passwd)
c.connect()
while True:
SoilHum = soilhum_read()
paylod_ = {'SoilHum': SoilHum}
msg_ = json.dumps(paylod_)
c.publish(TOPIC, msg_, retain=True)
oledisplay(SoilHum)
time.sleep(2)
def connect_and_subscribe():
global client_id, mqtt_server, topic_sub
client = MQTTClient(client_id, mqtt_server)
client.set_last_will(topic='hack42/tele/loungeledjes/status',
msg='offline',
retain=True)
client.connect()
client.publish('hack42/tele/loungeledjes/ifconfig',
str(sta_if.ifconfig()),
retain=True)
client.publish('hack42/tele/loungeledjes/status', 'online', retain=True)
return client
def main(server=SERVER):
c = MQTTClient(CLIENT_ID, server)
c.connect()
print("Connected to %s, waiting for button presses" % server)
while True:
while True:
if button.value() == 0:
break
time.sleep_ms(20)
print("Button pressed")
c.publish(TOPIC, b"toggle")
time.sleep_ms(200)
c.disconnect()
def main():
global wl_net
# Initialize wireless network
if not wl_net:
wl_net = init_wifi()
# Initialize DHT
sensor = dht.DHT22(machine.Pin(4))
# Main loop to read temp and send it
# Read the temperature
sensor.measure()
temp = sensor.temperature() * 9.0 / 5.0 + 32.0
humid = sensor.humidity()
print('v1.2: Temp / Humid = {:2} / {:2}'.format(temp, humid))
# Send it through MQTT
mqtt_c = MQTTClient(MQ_CLIENT,
MQ_BROKER_IP,
user=MQ_USER,
password=MQ_PASSWORD)
mqtt_c.connect()
json_array = {
"temp": "{}".format(temp),
"hum": "{}".format(humid),
}
import ujson
# {"source":"TV (0)","pvr_status":"NONE","powerstate":"Normal","tv_mode":"Cable (1)","volume":"7","channel_number":"45","channel_name":"Nat Geo HD","program_name":"Personaje ale nazismului","resolution":"1920x1080","error":false}
mqtt_c.publish(MQ_TOPIC.encode('utf-8'),
ujson.dumps(json_array),
retain=True)
mqtt_c.disconnect()
# configure RTC.ALARM0 to be able to wake the device
rtc = machine.RTC()
rtc.irq(trigger=rtc.ALARM0, wake=machine.DEEPSLEEP)
# set RTC.ALARM0 to fire after 10 seconds (waking the device)
rtc.alarm(rtc.ALARM0, 10000) # For debugging, 10 seconds
# rtc.alarm(rtc.ALARM0, 1000 * DELAY_MLOOP) # Default: 60 seconds
# Make sure that the Node MCU has pin D0 (L15) wired to RST (R3)
# put the device to sleep
machine.deepsleep()
class MqttHelper:
def __init__(self, serverAddress, clientId):
self.mqttClient = MQTTClient(clientId, serverAddress)
self.mqttClient.connect()
def Publish(self, topic, message):
self.mqttClient.publish(topic, message)
def Subscribe(self, topic, callback):
self.mqttClient.set_callback(callback)
self.mqttClient.subscribe(topic)
def CheckForMessage(self):
self.mqttClient.check_msg()
def main(server=SERVER):
#端口号为：6002
c = MQTTClient(CLIENT_ID, server, 6002, username, password)
c.set_callback(sub_cb)
c.connect()
c.subscribe(TOPIC)
print("Connected to %s, subscribed to %s topic" % (server, TOPIC))
#publish报文上传数据点
c.publish('$dp', pubdata(message))
print('publish message:', message)
try:
while 1:
c.wait_msg()
finally:
c.disconnect()
class MQTT_CLI:
def __init__(self, wl, name, server):
self._cli = MQTTClient(name, server)
if not wl.isconnected():
wl.connect()
self._cli.connect()
self._cli.disconnect()
def publish(self, topic, msgobj):
try:
self._cli.connect()
msgstr = json.dumps(msgobj)
self._cli.publish(topic.encode(), msgstr.encode())
self._cli.disconnect()
except:
pass
def main(server=SERVER):
wlan = network.WLAN(network.STA_IF)
if not wlan.isconnected():
wlan.active(True)
wlan.connect('Micropython-wifi', '12345678')
while not wlan.isconnected():
pass
print('network config:', wlan.ifconfig())
c = MQTTClient(CLIENT_ID, server)
c.connect()
print("Connected to %s, waiting for timer" % server)
fail = False
count = 0
value = '0'
data = uart.read(100)
c.publish(TOPIC, value, retain=True)
time.sleep(1)
c.disconnect()
class Cn2Mqtt():
# Class functionality variables.
# This variable holds the mqtt connection.
mqtt = ""
def connect(self):
""" connect function. This function is used to connect ESP8266 to the MQTT network.
"""
state = 0
while state != 2:
try:
self.mqtt = MQTTClient(client_id="CN2",
server=BROKER_IP,
port=BROKER_PORT,
user=BROKER_USERNAME,
password=BROKER_PASSWORD,
ssl=False)
self.mqtt.connect()
state = 2
except:
print('Error connecting to the broker')
time.sleep(0.5)
continue
print("Connected to MQTT network")
self.mqtt.set_callback(self.on_message)
def on_message(self, topic, payload):
print((topic, payload))
def publish(self, topic, msg, retain, qos):
self.mqtt.publish(topic, msg, retain, qos)
print("Message published successfully.")
def subscribe(self, topic, qos):
self.mqtt.subscribe(topic, qos)
print("Subscribed to topic: " + topic)
def read_send():
data_pm=bytearray(32)
pm.readinto(data_pm)
instruction_voc(light_on_voc)
data_voc = instruction_voc(read_instruct_voc)
if data_voc[0] == 255 and data_voc[1] == 135 and data_pm[0]==66 and data_pm[1]==77:
data_g = (data_voc[2] * 256 + data_voc[3]) / 1000
data_t = (data_voc[8] << 8 | data_voc[9]) / 100
data_h = (data_voc[10] << 8 | data_voc[11]) / 100
data_pm2_5 = data_pm[6]<<8 | data_pm[7]
data_pm10 = data_pm[8] << 8 | data_pm[9]
dataframe = {"params": {"concentration": data_g, "temperature": data_t, "humidity": data_h,
"pm2_5":data_pm2_5,"pm10":data_pm10}}
tvoc_mqtt = MQTTClient(client_id=mqttClientId, server=server, port=port, user=mqttUsername, password=mqttPassword,keepalive=60)
tvoc_mqtt.set_callback(callback)
tvoc_mqtt.connect()
time.sleep(1)
tvoc_mqtt.publish(topic_p,json.dumps(dataframe))
time.sleep(1)
tvoc_mqtt.subscribe(topic_s)
time.sleep(1)
class Product():
def __init__(self,
server="45.199.111.5",
client_id="524485249",
port=61613,
topic=b"topic1",
username='******',
password='******',
check=1):
# Default MQTT server to connect to
self.SERVER = server
self.CLIENT_ID = client_id
self.TOPIC = topic
self.PORT = port
self.username = username
self.password = password
#上传数据变量
self.value_data = 0
self.c = MQTTClient(self.CLIENT_ID, self.SERVER, self.PORT,
self.username, self.password)
self.c.set_callback(self.sub_cb)
self.c.connect()
self.c.subscribe(self.TOPIC)
#self.c.publish('$dp',self.pubdata("temp0",self.value_data)) #上传
#self.push_data(content='1234')
# if check == 1:
# _thread.start_new_thread(self.keep_alive,())
# _thread.start_new_thread(self.wait_listen,())
def push_data(self, topic='topic1', content=''): #str str
self.c.publish(topic, content) #上传
def keep_alive(self):
while 1:
#self.c.publish('$dp',self.pubdata()) #上传
self.c.publish(b'topic2', 'a')
#self.c.ping()
time.sleep(15)
def wait_listen(self):
while 1:
self.c.wait_msg()
# def pubdata(self,id,up_data):
# data = {'datastreams':[{'id':str(id),'datapoints':[{'value':str(up_data)}] } ]}
# j_d = json.dumps(data)
# j_l = len(j_d)
# arr = bytearray(j_l + 3)
# arr[0] = 1 #publish数据类型为json
# arr[1] = int(j_l / 256) # json数据长度 高位字节
# arr[2] = j_l % 256 # json数据长度 低位字节
# arr[3:] = j_d.encode('ascii') # json数据
# return arr
def sub_cb(self, topic, msg):
print((topic, msg))
if msg == b"off":
print("1")
elif msg == b"on":
print("0")
class Cn2Mqtt():
"""
This class serves as a bridge between the mqtt part of the program and the rest of the code.
It is used to serve all basic functions needed in the network.
"""
# Class functionality variables.
# This variable holds the mqtt connection.
mqtt = None
# The topic and the payload of the incoming message.
r_topic = None
r_message = None
def connect(self):
""" connect function. This function is used to connect ESP8266 to the MQTT network.
"""
state = 0
while state != 2:
try:
# connection object instance
self.mqtt = MQTTClient(client_id="CN2", server=BROKER_IP, port=BROKER_PORT,
user=BROKER_USERNAME, password=BROKER_PASSWORD, ssl=True)
# connection to network
self.mqtt.connect()
state = 2
except:
print('Error connecting to the broker')
time.sleep(0.5)
continue
print("Connected to MQTT network")
# Set function "on_message" to work as a callback.
self.mqtt.set_callback(self.on_message)
def standby_loop(self):
""" standby_loop function. This function the basic looping function for every
incomming MQTT message.
"""
if True:
# Blocking wait for message
self.mqtt.wait_msg()
else:
# Non-blocking wait for message
self.mqtt.check_msg()
time.sleep(1)
def on_message(self, topic, msg):
"""on_message function. This function runs when a new message arrives.
Args:
param1 (byte): The message topic in byte format.
param2 (byte): The message payload in byte format.
"""
print("Message arrived...")
# class variables are set in order to share the message with other classes
Cn2Mqtt.r_topic = topic.decode("utf-8")
Cn2Mqtt.r_message = msg.decode("utf-8")
def publish(self,topic, msg, retain, qos):
"""publish function. This function is used to publish a message.
Args:
param1 (str): The message topic.
param2 (str): The message payload.
param3 (Boolean): Retain flag.
param4 (int): The qos level.
"""
self.mqtt.publish(topic, msg, retain, qos)
print("Message published successfully.")
def subscribe(self, topic, qos):
"""subscribe function. This function is used to publish a message.
Args:
param1 (str): The message topic.
param2 (int): The qos level.
"""
self.mqtt.subscribe(topic, qos)
print("Subscribed to topic: " + topic)
def disconnect(self):
""" disconnect function. This function is used to disconnect ESP8266 from the MQTT network.
"""
print("Disconnecting from Broker")
self.mqtt.disconnect()
class mqtt:
def __init__(self, client_id='', username='', password=''):
self.server = "183.230.40.39"
self.client_id = "产品id"
self.username = '******'
self.password = '******'
self.topic = b"TurnipRobot" # 随意名字
self.mqttClient = MQTTClient(self.client_id, self.server, 6002,
self.username, self.password)
self.dht11 = dht.DHT11(Pin(14))
self.pid = 0 # publish count
self.num = 0
def isPin(self, pin='-1'):
if int(pin) in (0, 1, 2, 3, 4, 5, 12, 13, 14, 15, 16):
return int(pin)
else:
return -1
def pubData(self, kc):
# self.dht11.measure()
value = {
'datastreams': [{
"id": "hello",
"datapoints": [{
"value": kc
}]
}]
} # 你自己的数据流
jdata = json.dumps(value)
jlen = len(jdata)
bdata = bytearray(jlen + 3)
bdata[0] = 1 # publish data in type of json
bdata[1] = int(jlen / 256) # data lenght
bdata[2] = jlen % 256 # data lenght
bdata[3:jlen + 4] = jdata.encode('ascii') # json data
# print(bdata)
# print('publish data', str(self.pid + 1))
self.mqttClient.publish('$dp', bdata)
self.pid += 1
def putt(self, t):
# num = rtc.datetime()[6]
# if num == 100: num = 0
self.pubData(66)
def sub_callback(self, topic, msg):
print((topic, msg))
cmd = (eval(bytes.decode(msg)))
print(type(cmd))
print(cmd)
# cmd = msg.decode('ascii').split(" ")
print(cmd[0])
# try:
print(8888888)
if cmd[0] == 'pin':
print(999999)
if cmd[0] == 'pin' and self.isPin(cmd[1]) >= 0:
value = Pin(int(cmd[1])).value()
if cmd[2] == 'on':
value = 1
elif cmd[2] == 'off':
value = 0
elif cmd[2] == 'toggle':
value = 0 if value == 1 else 1
pin = Pin(int(cmd[1]),
Pin.OUT) # , value=(1 if cmd[2] == 'on' else 0))
pin.value(value)
print('%s完毕' % cmd[1])
else:
print('Pin number outof range.')
# except:
elif cmd[0]['key'] == '+':
print(self.num)
print(5666)
self.num += 1
self.num = view(self.num)
print(self.num)
elif cmd[0]['key'] == '-':
self.num -= 1
self.num = view(self.num)
print(self.num)
def connect(self):
self.mqttClient.set_callback(self.sub_callback)
self.mqttClient.connect()
tim = Timer(1)
tim.init(period=3000, mode=Timer.PERIODIC, callback=self.putt)
self.mqttClient.subscribe(self.topic)
print("连接到 %s, 订阅 %s 主题." % (self.server, self.topic))
try:
while 1:
# self.mqttClient.wait_msg()
self.mqttClient.check_msg()
finally:
# self.mqttClient.unsubscribe(self.topic)
self.mqttClient.disconnect()
print('mqtt closed')
tim.deinit()
class Blocky:
def __init__(self, config):
self.config = config
self.state = 0
self.has_msg = False
self.topic = ''
self.msg = ''
self.mqtt = MQTTClient(CHIP_ID, BROKER, 0, CHIP_ID,
self.config['auth_key'], 1883)
self.message_handlers = {}
def on_message(self, topic, msg):
print('On new message topic: ' + topic.decode())
self.has_msg = True
self.topic = topic.decode()
self.msg = msg.decode()
def connect(self):
print('Connecting to broker')
self.mqtt.set_callback(self.on_message)
try:
self.mqtt.connect()
except Exception as error:
print('Failed to connect to broker')
return False
register_data = {
'event': 'register',
'chipId': CHIP_ID,
'firmwareVersion': '1.0',
'name': self.config.get('device_name', 'Blocky_' + CHIP_ID),
'type': 'esp32'
}
self.mqtt.publish(topic=self.config['auth_key'] + '/sys/',
msg=ujson.dumps(register_data))
self.mqtt.subscribe(self.config['auth_key'] + '/sys/' + CHIP_ID +
'/ota/#')
self.mqtt.subscribe(self.config['auth_key'] + '/sys/' + CHIP_ID +
'/run/#')
self.mqtt.subscribe(self.config['auth_key'] + '/sys/' + CHIP_ID +
'/rename/#')
self.mqtt.subscribe(self.config['auth_key'] + '/sys/' + CHIP_ID +
'/reboot/#')
self.mqtt.subscribe(self.config['auth_key'] + '/sys/' + CHIP_ID +
'/upload/#')
self.mqtt.subscribe(self.config['auth_key'] + '/sys/' + CHIP_ID +
'/upgrade/#')
self.state = 1
print('Connected to broker')
return True
def process(self):
if self.state != 1:
return
self.mqtt.check_msg()
self.handle_msg()
def handle_msg(self):
if not self.has_msg:
return
print('Receive new message with topic: ' + self.topic)
print('Message: ' + self.msg)
sysPrefix = self.config['auth_key'] + '/sys/' + CHIP_ID + '/'
userPrefix = self.config['auth_key'] + '/user/'
if self.topic.startswith(sysPrefix):
if self.topic == sysPrefix + 'ota':
print('Receive OTA message')
f = open('user_code.py', 'w')
f.write(self.msg)
f.close()
otaAckMsg = {'chipId': CHIP_ID, 'event': 'ota_ack'}
self.mqtt.publish(topic=self.config['auth_key'] + '/sys/',
msg=ujson.dumps(otaAckMsg))
time.sleep_ms(500)
machine.reset()
elif self.topic == sysPrefix + 'run':
print('Receive RUN message')
exec(self.msg, globals())
elif self.topic == sysPrefix + 'reboot':
print('Receive REBOOT message')
machine.reset()
elif self.topic == sysPrefix + 'upload':
print('Receive UPLOAD message')
elif self.topic == sysPrefix + 'upgrade':
print('Receive UPGRADE message')
elif self.topic.startswith(userPrefix):
for t in self.message_handlers:
format_topic = t.replace('/+', '/[a-zA-Z0-9_]+')
format_topic = format_topic.replace('/#', '/*')
if re.match(format_topic, self.topic):
self.message_handlers.get(t)(self.topic, self.msg)
self.topic = ''
self.msg = ''
self.has_msg = False
def send_message(self, topic, msg):
if self.state != 1 or not topic or not msg:
return
topic = self.config['auth_key'] + '/user/' + topic
self.mqtt.publish(topic=topic, msg=str(msg))
def log(self, text):
if self.state != 1 or text is None or text == '':
return
sysPrefix = self.config['auth_key'] + '/sys/' + CHIP_ID + '/log'
self.mqtt.publish(topic=sysPrefix, msg=str(text))
def subscribe(self, topic, cb):
if self.state != 1 or not topic:
return
topic = self.config['auth_key'] + '/user/' + topic
self.mqtt.subscribe(topic)
self.message_handlers[topic] = cb
def main(server=SERVER):
print(config.value)
wlan = network.WLAN(network.STA_IF)
if not wlan.isconnected():
wlan.active(True)
wlan.connect(config.value[0][1], config.value[0][2])
while not wlan.isconnected():
pass
print('network config:', wlan.ifconfig())
c = MQTTClient(CLIENT_ID, server)
c.connect()
print("Connected to %s, waiting for timer" % server)
value = '0'
data = uart.read(100)
while wlan.isconnected():
data = uart.read(100)
if data != None:
a = str(data[2:])
b = a.split('\'')
e = b[1].split('\\')
d = e[0].split(',')
if d[0]=='IR':
print(d[0])
print(d[1])
if d[1] == '128':
c.publish(config.value[2][1],"ON",retain=True)
c.publish(config.value[1][1],"Remote",retain=True)
print(d[1])
if d[1] == '129':
c.publish(config.value[2][1],"OFF",retain=True)
c.publish(config.value[1][1],"Remote",retain=True)
print(d[1])
if d[1] == '130':
c.publish(config.value[2][2],"ON",retain=True)
c.publish(config.value[1][2],"Remote",retain=True)
print(d[1])
if d[1] == '131':
c.publish(config.value[2][2],"OFF",retain=True)
c.publish(config.value[1][2],"Remote",retain=True)
print(d[1])
print("Time to publish")
c.disconnect()
from simple import MQTTClient
client = MQTTClient('UNIQUEID', '172.20.10.3')
client.connect()
client.publish('temperatur', '42')
btn = machine.Pin(BTN_INT_PIN, machine.Pin.IN, machine.Pin.PULL_UP)
btn.callback(trigger=machine.Pin.IRQ_RISING, handler=IsrCallback)
#Init
py = Pysense()
si = SI7006A20(py)
li = LIS2HH12(py)
lt = LTR329ALS01(py)
mpp = MPL3115A2(py, mode=PRESSURE)
#Main Cycle
while 1:
client.check_msg() #Checks if there is data to receive
#Temperature Publish
client.publish(topic=TOPIC_PUBLISH + TEMP_CH,
msg="temp,c=" + str(si.temperature()))
time.sleep_ms(10) #Limpar barramento I2C
#Humidity Publish
client.publish(topic=TOPIC_PUBLISH + HUMI_CH,
msg="rel_hum,p=" + str(si.humidity()))
time.sleep_ms(10) #Limpar barramento I2C
#Accelerometer Publish
x, y, z = li.acceleration()
client.publish(topic=TOPIC_PUBLISH + ACCEL_X_CH,
msg="analog_sensor=" + str(x))
client.publish(topic=TOPIC_PUBLISH + ACCEL_Y_CH,
msg="analog_sensor=" + str(y))
client.publish(topic=TOPIC_PUBLISH + ACCEL_Z_CH,
msg="analog_sensor=" + str(z))
class mqtt:
failed_count = 0
def __init__(self, client_id='', username='', password=''):
self.server = "183.230.40.39"
self.client_id = client_id
self.username = username
self.password = password
self.topic = (chipid() +
'-sub').encode('ascii') if client_id == '' else (
client_id + '-' + chipid() + '-sub').encode('ascii')
self.mqttClient = MQTTClient(self.client_id, self.server, 6002,
self.username, self.password)
self.dht11 = dht.DHT11(Pin(14))
self.pid = 0 # publish count
def isPin(self, pin='-1'):
if int(pin) in (0, 1, 2, 3, 4, 5, 12, 13, 14, 15, 16):
return int(pin)
else:
return -1
def pubData(self, t):
self.dht11.measure()
value = {
'datastreams': [{
"id": "temp",
"datapoints": [{
"value": self.dht11.temperature()
}]
}, {
"id": "humi",
"datapoints": [{
"value": self.dht11.humidity()
}]
}]
}
jdata = json.dumps(value)
jlen = len(jdata)
bdata = bytearray(jlen + 3)
bdata[0] = 1 # publish data in type of json
bdata[1] = int(jlen / 256) # data lenght
bdata[2] = jlen % 256 # data lenght
bdata[3:jlen + 4] = jdata.encode('ascii') # json data
#print(bdata)
print('publish data', str(self.pid + 1))
try:
self.mqttClient.publish('$dp', bdata)
self.pid += 1
self.failed_count = 0
except Exception as ex:
self.failed_count += 1
print('publish failed:', ex.message())
if self.failed_count >= 3:
print('publish failed three times, esp resetting...')
reset()
def sub_callback(self, topic, msg):
print((topic, msg))
cmd = msg.decode('ascii').split(" ")
if len(cmd) == 3:
if cmd[0] == 'pin' and self.isPin(cmd[1]) >= 0:
value = Pin(int(cmd[1])).value()
if cmd[2] == 'on':
value = 1
elif cmd[2] == 'off':
value = 0
elif cmd[2] == 'toggle':
value = 0 if value == 1 else 1
pin = Pin(int(cmd[1]),
Pin.OUT) #, value=(1 if cmd[2] == 'on' else 0))
pin.value(value)
else:
print('Pin number outof range.')
def connect(self):
self.mqttClient.set_callback(self.sub_callback)
self.mqttClient.connect()
tim = Timer(-1)
tim.init(period=30000, mode=Timer.PERIODIC,
callback=self.pubData) #Timer.PERIODIC Timer.ONE_SHOT
self.mqttClient.subscribe(self.topic)
print("Connected to %s, subscribed to %s topic." %
(self.server, self.topic))
try:
while 1:
#self.mqttClient.wait_msg()
self.mqttClient.check_msg()
finally:
#self.mqttClient.unsubscribe(self.topic)
self.mqttClient.disconnect()
print('mqtt closed')
tim.deinit()
from i2c import *
from ds18b20 import *
utime.sleep_ms(2000)
sta = network.WLAN(network.STA_IF)
sta.active(1)
sta.connect("Kritsnam_3", "hydro123")
print("tag2")
utime.sleep_ms(5000)
c = MQTTClient(client_id="sahil12",
server="172.26.83.102",
port=1883,
user="******",
password="******")
c.connect()
print(temp, str(addr1), addr2)
#temp = 23.8
#addr1 = 10
mesg = '{"temperature": ' + str(temp) + ', "addr1": ' + str(
addr1)[6:-1] + ', "addr2": ' + str(addr2)[6:-1] + '}'
print(mesg)
#addr2 = 10
#print(temp, addr1, addr1)
#for i in range (1,10):
#c.publish(topic="v1/devices/me/telemetry", msg='{"firmware_version": ' + version + ', "serial_number": ' + number +'}')
c.publish(topic="v1/devices/me/telemetry", msg=mesg)
#c.publish(topic="v1/devices/me/telemetry", msg= "{'temperature':25, 'humidity':53.0, 'active': false}")
utime.sleep_ms(5000)
c.disconnect()
PASSWORD = "******"
TOPIC = "topic"
sta_if = WLAN(STA_IF)
ap_if = WLAN(AP_IF)
def sub_cb(topic, msg):
print("{:s},{:s}".format(topic, msg))
s.fill(0)
s.text("{:s}:{:s}".format(topic, msg), 0, 0)
s.show()
def restart_and_reconnect():
print('Failed to connect to MQTT broker. Reconnecting...')
sleep(10)
reset()
c = MQTTClient(CLIENT_ID, SERVER, PORT, user=USER_NAME,
password=PASSWORD, keepalive=60)
c.set_callback(sub_cb)
c.connect()
c.subscribe(TOPIC)
c.publish(TOPIC, 'hello ESP266')
while True:
try:
c.check_msg()
except OSError as e:
restart_and_reconnect()
from simple import MQTTClient
# Connection information
mqtthost = 'mqtt.enco.io'
mqttport = 8883
mqttssl = True
# Channel specific parameters
uname = '<< YOUR INFO HERE >>'
pwval = '<< YOUR INFO HERE >>'
topicName = '<< YOUR INFO HERE >>'
deviceId = '<< YOUR INFO HERE >>'
# Create an instance for further use, connect and use directly
connection = MQTTClient(client_id=deviceId,
server=mqtthost,
port=mqttport,
user=uname,
password=pwval,
ssl=mqttssl)
print('Connect to broker', mqtthost, ':', str(mqttport))
connection.connect()
print('Publish to ', topicName)
connection.publish(topicName, b'MQTTS Greetings from the WiPy !!')
print('Close')
connection.disconnect()
print('All done')
from simple import MQTTClient
import utime
import network
sta = network.WLAN(network.STA_IF)
sta.active(1)
sta.connect("Kritsnam_3", "hydro123")
utime.sleep_ms(6000)
c = MQTTClient(client_id="sahil12",
server="172.26.83.102",
port=1883,
user="******",
password="******")
c.connect()
f = 1
s = 'fej'
for i in range(1, 10):
c.publish(topic="v1/devices/me/telemetry",
msg='''{"firmware_version":'f', "serial_number":'s'}''')
utime.sleep_ms(1000)
c.disconnect()
for i in range(0, 5):
pycom.rgbled(0x000055) #Dark Blue - Connected to MQTT
time.sleep_ms(100)
pycom.rgbled(0x0) #LED OFF
time.sleep_ms(100)
adc = ADC() # Create an ADC object
adc.init(bits=ADC_BITS) # Enables the ADC block with 12 bits width samples
apin = adc.channel(
pin='P16', attn=ADC.ATTN_11DB
) # Create an analog pin on P16, with 11 db Attenuation so the V range is 0 to 3.3V
#Main Cycle
while 1:
val = 0
for i in range(0, MAX_SAMPLES):
val += apin.value()
val = (val / MAX_SAMPLES
) #Mean of 1000 Samples to reduce the noise/glitches
val = (3.3 /
((2**ADC_BITS) - 1)) * val #Scale/Mapping of the value to voltage
#3.3V is the maximum value of the input for a 11dB Attenuation
#Battery
client.publish(topic=TOPIC_PUBLISH + MQTT_CHANNEL_BAT,
msg="voltage,v=" + str(val))
print('My Battery: ', val, ' (V)')
time.sleep_ms(200)
