def init(self, master):
PluginPanel.init(self, master)
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side = TOP, fill=BOTH)
sign = TFrame(top, style='RoundedFrame', borderwidth=5)
sign.pack(side = TOP)
self.sign=TLabel(sign, image='shaping_trim')
self.sign.pack(side=TOP)
button = UpdatedButton(top, text = _("Apply"),
command = self.apply_action,
sensitivecb = self.is_correct_selection)
button.pack(side = BOTTOM, expand = 1, fill = X)
self.Subscribe(SELECTION, button.Update)
button_frame = TFrame(top, style='FlatFrame', borderwidth=1)
button_frame.pack(side = BOTTOM, fill=X, pady=5)
self.var_originals = IntVar(top)
self.var_originals.set(0)
self.autoupdate_check = TCheckbutton(button_frame, text = _("Leave originals"),
variable = self.var_originals)
self.autoupdate_check.pack(side = LEFT, anchor=W, padx=10)
self.init_from_doc()
self.subscribe_receivers()
def init(self, master):
PluginPanel.init(self, master)
top = TFrame(self.panel, style='FlatFrame', borderwidth=7)
top.pack(side = TOP, fill=BOTH)
sign = TFrame(top, style='RoundedFrame', borderwidth=5)
sign.pack(side=TOP)
self.sign = TLabel(sign, image='color_converter')
self.sign.pack(side=TOP)
self.cs_name = StringVar(top)
self.cs_name.set(RGB)
label = TLabel(top, text=_("Colorspace:")+" ")
label.pack(side = TOP, anchor=W)
self.colorspaces = TCombobox(top, state='readonly', postcommand = self.set_cs,
values=self.make_cs_list(), width=14, style='ComboNormal',
textvariable=self.cs_name)
self.colorspaces.pack(side = TOP, fill=X, pady=3)
button = UpdatedButton(top, text = _("Apply"),
command = self.apply_colorspace,
sensitivecb = self.is_selection)
button.pack(side = BOTTOM, expand = 1, fill = X, pady=3)
self.Subscribe(SELECTION, button.Update)
self.init_from_doc()
self.subscribe_receivers()
def init(self, master):
PluginPanel.init(self, master)
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side = TOP, fill=BOTH)
sign = TFrame(top, style='RoundedFrame', borderwidth=5)
sign.pack(side = TOP)
self.sign=TLabel(sign, image='shaping_divide')
self.sign.pack(side=TOP)
button = UpdatedButton(top, text = _("Apply"),
command = self.apply_action,
sensitivecb = self.is_correct_selection)
button.pack(side = BOTTOM, expand = 1, fill = X)
self.Subscribe(SELECTION, button.Update)
button_frame = TFrame(top, style='FlatFrame', borderwidth=1)
button_frame.pack(side = BOTTOM, fill=X, pady=5)
self.var_originals = IntVar(top)
self.var_originals.set(1)
self.autoupdate_check = TCheckbutton(button_frame, text = _("Leave originals"),
variable = self.var_originals)
self.autoupdate_check.pack(side = LEFT, anchor=W, padx=10)
self.init_from_doc()
self.subscribe_receivers()
def create_std_buttons(self, master, update_from=1):
button_frame = Frame(master)
button = Checkbutton(button_frame,
text=_("Auto Update"),
variable=self.var_auto_update)
button.pack(side=TOP, expand=1, fill=X)
if update_from:
button = UpdatedButton(button_frame,
text=_("Update From..."),
command=self.update_from_object)
button.pack(side=TOP, expand=1, fill=X)
button = UpdatedButton(button_frame,
text=_("Apply"),
command=self.do_apply,
sensitivecb=self.can_apply)
button.pack(side=LEFT, expand=1, fill=X)
self.Subscribe(SELECTION, button.Update)
button = UpdatedButton(button_frame,
text=_("Close"),
command=self.close_dlg)
button.pack(side=RIGHT, expand=1, fill=X)
return button_frame
def build_dlg(self):
root = self.top
top = TFrame(root, style='FlatFrame', borderwidth=10)
top.pack(side=TOP, fill=BOTH, expand=1)
frame = TFrame(top, name='top', style='FlatFrame')
frame.pack(side=TOP, fill=BOTH, expand=1)
label = TLabel(frame, image='messagebox_' + self.image, style='FlatLabel')
label.pack(side=LEFT, padx=5, pady=5)
label = TLabel(frame, text=self.message, name='msg', style='FlatLabel', justify='center', anchor='center')
label.pack(side=RIGHT, fill=BOTH, expand=1)
frame = TFrame(top, name='bot', style='FlatFrame')
frame.pack(side=BOTTOM)#, fill = X, expand = 1)
command = self.ok
for i in range(len(self.buttons)):
button = UpdatedButton(frame, text=' ' + self.buttons[i] + ' ', command=command, args=i)
button.grid(column=i, row=0, sticky='ew', padx=10, pady=0)
if i == self.default:
if TkVersion >= 8.0:
button['default'] = 'active'
self.focus_widget = button
else:
if TkVersion >= 8.0:
button['default'] = 'normal'
if self.default is not None:
top.bind('<Return>', self.invoke_default)
frame = TFrame(top, name='mid', style='FlatFrame', borderwidth=1)
frame.pack(side=TOP, fill=X)
root.resizable (width=0, height=0)
def init(self, master):
PluginPanel.init(self, master)
self.initial_color = self.default_color
self.current_color = copy.copy(self.initial_color)
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side=TOP, fill=BOTH)
self.selector = ColorSpaceSelector(top, self.refresh_widgets,
self.current_color, self.sign)
self.selector.pack(side=TOP, expand=1, fill=X)
self.picker = ColorChooserWidget(top, self.refresh_widgets,
self.current_color)
self.picker.pack(side=TOP, expand=1, fill=X)
self.digitizer = ColorDigitizer(top, self.refresh_widgets,
self.current_color)
self.digitizer.pack(side=TOP, expand=1, fill=X)
button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_pattern,
sensitivecb=self.is_selection)
button.pack(side=BOTTOM, expand=1, fill=X)
self.Subscribe(SELECTION, button.Update)
button_frame = TFrame(top, style='FlatFrame', borderwidth=1)
button_frame.pack(side=BOTTOM, fill=X, pady=5)
button = TButton(button_frame,
style='TSmallbutton',
text=' ',
image='small_colorpicker',
command=self.copy_from)
button.pack(side=LEFT)
tooltips.AddDescription(button, _("Copy From..."))
button = TButton(button_frame,
style='TSmallbutton',
text=' ',
image='restore_color',
command=self.restore_color)
button.pack(side=LEFT, padx=5)
tooltips.AddDescription(button, _("Restore color"))
self.var_autoupdate = IntVar(top)
self.var_autoupdate.set(1)
self.autoupdate_check = TCheckbutton(button_frame,
text=_("Auto Update"),
variable=self.var_autoupdate,
command=self.init_from_doc)
self.autoupdate_check.pack(side=RIGHT, anchor=W, padx=10)
self.init_from_doc()
self.subscribe_receivers()
def create_std_buttons(self, master):
frame = Frame(master, borderwidth=2)
button = UpdatedButton(frame,
text=_("Apply"),
command=self.do_apply,
sensitivecb=self.can_apply,
width=15)
button.pack(side=TOP)
return frame
def build_dlg(self):
root = self.top
top = TFrame(root, style='FlatFrame', borderwidth=10)
top.pack(side=TOP, fill=BOTH, expand=1)
frame = TFrame(top, name='top', style='FlatFrame')
frame.pack(side=TOP, fill=BOTH, expand=1)
label = TLabel(frame,
image='messagebox_' + self.image,
style='FlatLabel')
label.pack(side=LEFT, padx=5, pady=5)
label = TLabel(frame,
text=self.message,
name='msg',
style='FlatLabel',
justify='center',
anchor='center')
label.pack(side=RIGHT, fill=BOTH, expand=1)
frame = TFrame(top, name='bot', style='FlatFrame')
frame.pack(side=BOTTOM) #, fill = X, expand = 1)
command = self.ok
for i in range(len(self.buttons)):
button = UpdatedButton(frame,
text=' ' + self.buttons[i] + ' ',
command=command,
args=i)
button.grid(column=i, row=0, sticky='ew', padx=10, pady=0)
if i == self.default:
if TkVersion >= 8.0:
button['default'] = 'active'
self.focus_widget = button
else:
if TkVersion >= 8.0:
button['default'] = 'normal'
if self.default is not None:
top.bind('<Return>', self.invoke_default)
frame = TFrame(top, name='mid', style='FlatFrame', borderwidth=1)
frame.pack(side=TOP, fill=X)
root.resizable(width=0, height=0)
def init(self, master):
PluginPanel.init(self, master)
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side = TOP, fill=BOTH)
sign = TFrame(top, style='RoundedFrame', borderwidth=5)
sign.pack(side = TOP)
self.sign=TLabel(sign, image='messagebox_construct')
self.sign.pack(side=TOP)
button = UpdatedButton(top, text = _("Apply"),
command = self.apply_action,
sensitivecb = self.is_correct_selection)
button.pack(side = BOTTOM, expand = 1, fill = X)
self.Subscribe(SELECTION, button.Update)
self.init_from_doc()
self.subscribe_receivers()
def init(self, master):
PluginPanel.init(self, master)
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side=TOP, fill=BOTH)
sign = TFrame(top, style='RoundedFrame', borderwidth=5)
sign.pack(side=TOP)
self.sign = TLabel(sign, image='messagebox_construct')
self.sign.pack(side=TOP)
button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_action,
sensitivecb=self.is_correct_selection)
button.pack(side=BOTTOM, expand=1, fill=X)
self.Subscribe(SELECTION, button.Update)
self.init_from_doc()
self.subscribe_receivers()
def init(self, master):
PluginPanel.init(self, master)
self.initial_color = self.default_color
self.current_color = copy.copy(self.initial_color)
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side=TOP, fill=BOTH)
self.selector = ColorSpaceSelector(top, self.refresh_widgets, self.current_color, self.sign)
self.selector.pack(side=TOP, expand=1, fill=X)
self.picker = ColorChooserWidget(top, self.refresh_widgets, self.current_color)
self.picker.pack(side=TOP, expand=1, fill=X)
self.digitizer = ColorDigitizer(top, self.refresh_widgets, self.current_color)
self.digitizer.pack(side=TOP, expand=1, fill=X)
button = UpdatedButton(top, text=_("Apply"),
command=self.apply_pattern,
sensitivecb=self.is_selection)
button.pack(side=BOTTOM, expand=1, fill=X)
self.Subscribe(SELECTION, button.Update)
button_frame = TFrame(top, style='FlatFrame', borderwidth=1)
button_frame.pack(side=BOTTOM, fill=X, pady=5)
button = TButton(button_frame, style='TSmallbutton', text=' ', image='small_colorpicker', command=self.copy_from)
button.pack(side=LEFT)
tooltips.AddDescription(button, _("Copy From..."))
button = TButton(button_frame, style='TSmallbutton', text=' ', image='restore_color', command=self.restore_color)
button.pack(side=LEFT, padx=5)
tooltips.AddDescription(button, _("Restore color"))
self.var_autoupdate = IntVar(top)
self.var_autoupdate.set(1)
self.autoupdate_check = TCheckbutton(button_frame, text=_("Auto Update"), variable=self.var_autoupdate,
command=self.init_from_doc)
self.autoupdate_check.pack(side=RIGHT, anchor=W, padx=10)
self.init_from_doc()
self.subscribe_receivers()
class MovePanel(PluginPanel):
name='Move'
title = _("Move")
def init(self, master):
PluginPanel.init(self, master)
root=self.mw.root
self.var_width_number=DoubleVar(root)
self.var_height_number=DoubleVar(root)
self.var_width_base=DoubleVar(root)
self.var_height_base=DoubleVar(root)
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number, var_width_unit)
self.var_height = LengthVar(10, unit,self.var_height_number,var_height_unit)
jump=config.preferences.default_unit_jump
self.var_width.set(0)
self.var_height.set(0)
self.var_width_base.set(0)
self.var_height_base.set(0)
self.var_position = StringVar(root)
self.var_position.set(ABSOLUTE)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side = TOP, fill=BOTH)
#---------------------------------------------------------
# Horisontal size
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side = TOP, fill = BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='move_h')
label.pack(side = LEFT, padx=5)
self.entry_width = TSpinbox(size_frameH, var=0, vartype=1, textvariable = self.var_width_number,
min = -50000, max = 50000, step = jump, width = 10, command=self.apply_move)
self.entry_width.pack(side = LEFT)
self.labelwunit = TLabel(size_frameH, style='FlatLabel', text = self.var_width.unit)
self.labelwunit.pack(side = LEFT, padx=5)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side = TOP, fill = BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='move_v')
label.pack(side = LEFT, padx=5)
self.entry_height = TSpinbox(size_frameV, var=0, vartype=1, textvariable = self.var_height_number,
min = -50000, max = 50000, step = jump, width = 10, command=self.apply_move)
self.entry_height.pack(side = LEFT)
self.labelhunit = TLabel(size_frameV, style='FlatLabel', text = self.var_height.unit)
self.labelhunit.pack(side = LEFT, padx=5)
#---------------------------------------------------------
# position chek
self.position_check = TCheckbutton(top, text = _("Absolute Coordinates"), variable = self.var_position,
onvalue=ABSOLUTE, offvalue=RELATIVE, command = self.position)
self.position_check.pack(side = TOP, anchor=W, padx=5,pady=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text = _("Basepoint:"))
label.pack(side = TOP, fill = BOTH, padx=5)
basepoint_frame=TLabelframe(top, labelwidget=label, style='Labelframe', borderwidth=4)
basepoint_frame.pack(side = TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame, anchor=self.var_basepoint, command = self.apply_basepoint)
self.Basepoint.pack(side = LEFT, fill = BOTH, padx=5)
label = TLabel(basepoint_frame, style='FlatLabel', image = 'coordinate_sys')
label.pack(side = LEFT, fill = BOTH, padx=10)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side = BOTTOM, fill = BOTH)
self.update_buttons = []
self.button = UpdatedButton(top, text = _("Apply"),
command = self.apply_move)
self.button.pack(in_ = button_frame, side = BOTTOM, expand = 1, fill = X, pady=3)
self.button_copy = UpdatedButton(top, text = _("Apply to Copy"),
command = self.apply_to_copy)
self.button_copy.pack(in_ = button_frame, side = BOTTOM, expand = 1, fill = X)
self.init_from_doc()
self.subscribe_receivers()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
self.document.Subscribe(EDITED, self.update_var)
config.preferences.Subscribe(CHANGED, self.update_pref)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
self.document.Unsubscribe(EDITED, self.update_var)
config.preferences.Unsubscribe(CHANGED, self.update_pref)
def init_from_doc(self, *arg):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_width.set_state(NORMAL)
self.entry_height.set_state(NORMAL)
self.position_check['state']=NORMAL
self.button['state']=NORMAL
self.button_copy['state']=NORMAL
else:
self.entry_width.set_state(DISABLED)
self.entry_height.set_state(DISABLED)
self.position_check['state']=DISABLED
self.button['state']=DISABLED
self.button_copy['state']=DISABLED
self.update_pref()
def apply_basepoint(self):
self.Update()
def position(self):
if self.var_position.get()==ABSOLUTE and self.var_basepoint.get()=='USER':
self.var_basepoint.set('C')
self.update_var()
def apply_move(self, *arg):
if self.button["state"]==DISABLED:
return
try:
var_x=self.var_width.get()
var_y=self.var_height.get()
except:
return
x, y = self.coordinates(self.var_position.get())
if self.var_position.get()==RELATIVE:
if self.var_width_base != self.var_width.get() or self.var_height_base != self.var_height.get():
self.var_basepoint.set('USER')
x,y = var_x, var_y
else:
x,y = var_x-x, var_y-y
if arg and arg[0] == 'Duplicate':
self.document.MoveAndCopy(x, y, Point(0,0))
else:
self.document.MoveSelected(x, y)
def apply_to_copy(self):
self.apply_move('Duplicate')
def coordinates(self, position):
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
if position == RELATIVE:
left, bottom = -hor_sel/2, -ver_sel/2
else:
left, bottom = br.left, br.bottom
cnt_x,cnt_y=self.Basepoint.get_basepoint(hor_sel,ver_sel,left,bottom)
if position == RELATIVE and cnt_x!=None:
return cnt_x*2, cnt_y*2
else:
return cnt_x, cnt_y
def update_pref(self, *arg):
self.labelwunit['text']=config.preferences.default_unit
self.labelhunit['text']=config.preferences.default_unit
self.entry_width.step=config.preferences.default_unit_jump
self.entry_height.step=config.preferences.default_unit_jump
self.update_var()
def update_var(self, *arg):
if len(self.document.selection.GetInfo()):
if self.var_basepoint.get() == 'USER':
x=self.var_width.get()
y=self.var_height.get()
self.var_width.unit=config.preferences.default_unit
self.var_height.unit=config.preferences.default_unit
self.var_width.set(x)
self.var_height.set(y)
else:
self.var_width.unit=config.preferences.default_unit
self.var_height.unit=config.preferences.default_unit
x, y = self.coordinates(self.var_position.get())
self.var_width.set(x)
self.var_height.set(y)
self.var_width_base=self.var_width.get()
self.var_height_base=self.var_height.get()
def is_selection(self):
return (len(self.document.selection) > 0)
def init(self, master):
PluginPanel.init(self, master)
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side=TOP, fill=BOTH)
sign = TFrame(top, style='RoundedFrame', borderwidth=5)
sign.pack(side=TOP)
self.sign = TLabel(sign, image='effects_blend')
self.sign.pack(side=TOP)
button_frame = TFrame(top, style='FlatFrame')
button_frame.pack(side=BOTTOM, fill=BOTH, expand=1)
self.update_buttons = []
button = UpdatedButton(top, text=_("Apply"),
command=self.apply_blend,
sensitivecb=self.doc_can_blend)
button.pack(in_=button_frame, side=LEFT, expand=1, fill=X)
self.document.Subscribe(SELECTION, button.Update)
self.update_buttons.append(button)
steps_frame = TFrame(top, style='FlatFrame', borderwidth=15)
steps_frame.pack(side=TOP)
label = TLabel(steps_frame, text=" " + _("Steps:") + " ")
label.pack(side=LEFT, anchor=E)
self.var_steps = IntVar(top)
self.var_steps.set(config.preferences.blend_panel_default_steps)
self.entry = TSpinbox(steps_frame, var=10, vartype=0, textvariable=self.var_steps,
min=1, max=100000, step=1, width=6, command=self.apply_blend)
self.entry.pack(side=LEFT, anchor=E)
button = UpdatedButton(top, text=_("Select Start"),
sensitivecb=self.can_select,
command=self.select_control,
args=SelectStart)
button.pack(side=BOTTOM, fill=X, expand=1, pady=3)
self.document.Subscribe(SELECTION, button.Update)
self.update_buttons.append(button)
button = UpdatedButton(top, text=_("Select End"),
sensitivecb=self.can_select,
command=self.select_control,
args=SelectEnd)
button.pack(side=BOTTOM, fill=X, expand=1)
self.document.Subscribe(SELECTION, button.Update)
self.update_buttons.append(button)
self.init_from_doc()
self.subscribe_receivers()
def init(self, master):
PluginPanel.init(self, master)
self.top = self.panel
root = self.top
self.USER_SPECIFIC = _("<Custom Size>")
top_root = TFrame(root, borderwidth=2, style='FlatFrame')
top_root.pack(side = TOP, expand = 1, fill = X)
top=TLabelframe(top_root, text='Page format')
top.pack(side = TOP, fill=X, pady=2)
var_width_number = DoubleVar(root)
var_height_number = DoubleVar(root)
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, var_width_number, var_width_unit)
self.var_height = LengthVar(10, unit,var_height_number,var_height_unit)
# ===========================================================
format_frame = TFrame(top, borderwidth=0, style='FlatFrame')
format_frame.pack(side = TOP, expand = 1, fill = X, pady = 4)
format_names = map(lambda t: t[0], PapersizesList)
format_names.append(self.USER_SPECIFIC)
self.var_format_name = StringVar(root)
format_menu =TComboSmall(format_frame, format_names, command = self.choose_format,
variable = self.var_format_name, width=17)
format_menu.configure(width = max(map(len, format_names)))
format_menu.pack(side = RIGHT, expand = 1, fill = X)
# =====================
size_frame = TFrame(top, borderwidth=0, style='FlatFrame')
size_frame.pack(side = TOP, fill = X, expand = 1, padx = 4, pady = 4)
label = TLabel(size_frame, text ="H: ", style='FlatLabel')
self.widthentry = TSpinbox(size_frame, textvariable = var_width_number, command = self.var_width.UpdateNumber,
vartype=1, min = 5, max = 50000, step = 1, width = 7)
self.widthentry.pack(side = RIGHT, anchor = E, padx = 5)
label.pack(side = RIGHT, anchor = E)
size_frame = TFrame(top, borderwidth=0, style='FlatFrame')
size_frame.pack(side = TOP, fill = X, expand = 1, padx = 4, pady = 4)
label = TLabel(size_frame, text = "V: ", style='FlatLabel')
self.heightentry = TSpinbox(size_frame, textvariable =var_height_number, command = self.var_height.UpdateNumber,
vartype=1, min = 5, max = 50000, step = 1, width = 7)
self.heightentry.pack(side = RIGHT, anchor = E, padx = 5)
label.pack(side = RIGHT, anchor = E)
size_frame = TFrame(top, borderwidth=0, style='FlatFrame')
size_frame.pack(side = TOP, fill = X, expand = 1, padx = 4, pady = 4)
def CallBoth(arg, x = self.var_width, y = self.var_height):
x.UpdateUnit(arg)
y.UpdateUnit(arg)
optmenu = create_unit_menu(size_frame, CallBoth, variable = var_width_unit, width = 3)
optmenu.pack(side = RIGHT, padx = 5)
label = TLabel(size_frame, text = "Units: ", style='FlatLabel')
label.pack(side = RIGHT)
#---------------------------------------------------------------------------------------------------------------------
middle=TLabelframe(top_root, text='Page orientation')
middle.pack(side = TOP, fill=X, pady=2)
self.label = TLabel(middle, image = 'portrait', style='FlatLabel')
self.label.pack(side = LEFT, padx=4)
orientation_frame = TFrame(middle, borderwidth=0, style='FlatFrame')
orientation_frame.pack(side = LEFT, expand = 1, fill = X)
self.var_orientation = IntVar(root)
radio = UpdatedRadiobutton(orientation_frame, text = _("Portrait"),
variable = self.var_orientation,
value = Portrait,
command = self.choose_orientation)
radio.pack(side = TOP, anchor=W)
radio = UpdatedRadiobutton(orientation_frame, text = _("Landscape"),
variable = self.var_orientation,
value = Landscape,
command = self.choose_orientation)
radio.pack(side = TOP, anchor=W)
#---------------------------------------------------------------------------------------------------------------------
button_frame = TFrame(top_root, borderwidth=1, style='FlatFrame')
button_frame.pack(side = BOTTOM, fill = BOTH, pady=2)
button = UpdatedButton(button_frame, text = _("Apply"), command = self.apply_settings, width=15)
button.pack(side = BOTTOM)
app.mw.docmanager.activedoc.Subscribe(LAYOUT, self.init_from_doc)
app.mw.Subscribe(DOCUMENT, self.init_from_doc)
class ScalePanel(PluginPanel):
name = 'ScaleAndMirror'
title = _("Scale and Mirror")
def init(self, master):
PluginPanel.init(self, master)
self.width_priority = 1
root = self.mw.root
self.var_width = DoubleVar(root)
self.var_height = DoubleVar(root)
unit = '%'
jump = 5
self.var_proportional = IntVar(root)
self.var_proportional.set(0)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side=TOP, fill=BOTH)
#---------------------------------------------------------
# Horisontal size
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='size_h')
label.pack(side=LEFT, padx=5)
self.entry_width = TSpinbox(size_frameH,
var=100,
vartype=1,
textvariable=self.var_width,
min=-30000,
max=30000,
step=jump,
width=6,
command=self.apply_scale)
self.entry_width.pack(side=LEFT)
self.entry_width.down_button.bind('<ButtonRelease>',
self.entry_width_chang)
self.entry_width.down_button.bind('<KeyRelease>',
self.entry_width_chang)
self.entry_width.up_button.bind('<ButtonRelease>',
self.entry_width_chang)
self.entry_width.up_button.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<FocusOut>', self.entry_width_chang)
self.entry_width.entry.bind('<FocusIn>', self.entry_width_FocusIn)
self.labelwunit = TLabel(size_frameH, style='FlatLabel', text=unit)
self.labelwunit.pack(side=LEFT, padx=5)
self.hflip = BooleanVar(root)
self.hflip.set(0)
button = TCheckbutton(size_frameH,
image="pstrip_hflip",
style='ToolBarCheckButton',
variable=self.hflip,
command=None)
button.pack(side=LEFT)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='size_v')
label.pack(side=LEFT, padx=5)
self.entry_height = TSpinbox(size_frameV,
var=100,
vartype=1,
textvariable=self.var_height,
min=-30000,
max=30000,
step=jump,
width=6,
command=self.apply_scale)
self.entry_height.pack(side=LEFT)
self.entry_height.down_button.bind('<ButtonRelease>',
self.entry_height_chang)
self.entry_height.down_button.bind('<KeyRelease>',
self.entry_height_chang)
self.entry_height.up_button.bind('<ButtonRelease>',
self.entry_height_chang)
self.entry_height.up_button.bind('<KeyRelease>',
self.entry_height_chang)
self.entry_height.entry.bind('<ButtonRelease>',
self.entry_height_chang)
self.entry_height.entry.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<FocusOut>', self.entry_height_chang)
self.entry_height.entry.bind('<FocusIn>', self.entry_height_FocusIn)
self.labelhunit = TLabel(size_frameV, style='FlatLabel', text=unit)
self.labelhunit.pack(side=LEFT, padx=5)
self.vflip = BooleanVar(root)
self.vflip.set(0)
button = TCheckbutton(size_frameV,
image="pstrip_vflip",
style='ToolBarCheckButton',
variable=self.vflip,
command=None)
button.pack(side=LEFT)
#---------------------------------------------------------
# Proportional chek
self.proportional_check = TCheckbutton(top,
text=_("Proportional"),
variable=self.var_proportional,
command=self.proportional)
self.proportional_check.pack(side=TOP, anchor=W, padx=5, pady=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top,
labelwidget=label,
style='Labelframe',
borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame,
anchor=self.var_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame,
style='FlatLabel',
image='coordinate_sys')
label.pack(side=LEFT, fill=BOTH, padx=10)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_scale)
self.button.pack(in_=button_frame,
side=BOTTOM,
expand=1,
fill=X,
pady=3)
self.button_copy = UpdatedButton(top,
text=_("Apply to Copy"),
command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
def init_from_doc(self, *arg):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_width.set_state(NORMAL)
self.entry_height.set_state(NORMAL)
self.proportional_check['state'] = NORMAL
self.button['state'] = NORMAL
self.button_copy['state'] = NORMAL
else:
self.entry_width.set_state(DISABLED)
self.entry_height.set_state(DISABLED)
self.proportional_check['state'] = DISABLED
self.button['state'] = DISABLED
self.button_copy['state'] = DISABLED
def entry_width_FocusIn(self, *arg):
self.width_priority = 1
def entry_height_FocusIn(self, *arg):
self.width_priority = 0
def ScaleSelected(self, h, v, cnt_x=None, cnt_y=None):
text = _("Scale")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
br = self.document.selection.coord_rect
hor_sel = br.right - br.left
ver_sel = br.top - br.bottom
if cnt_x is None:
cnt_x = hor_sel / 2 + br.left
if cnt_y is None:
cnt_y = ver_sel / 2 + br.bottom
trafo = Trafo(h, 0, 0, v, cnt_x - cnt_x * h,
cnt_y - cnt_y * v)
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def ScaleAndCopy(self, h, v, cnt_x=None, cnt_y=None):
text = _("Scale&Copy")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
br = self.document.selection.coord_rect
hor_sel = br.right - br.left
ver_sel = br.top - br.bottom
if cnt_x is None:
cnt_x = hor_sel / 2 + br.left
if cnt_y is None:
cnt_y = ver_sel / 2 + br.bottom
trafo = Trafo(h, 0, 0, v, cnt_x - cnt_x * h,
cnt_y - cnt_y * v)
self.document.ApplyToDuplicate()
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def entry_height_chang(self, *arg):
if self.var_proportional.get():
self.var_width.set(self.var_height.get())
def entry_width_chang(self, *arg):
if self.var_proportional.get():
self.var_height.set(self.var_width.get())
def proportional(self):
if self.width_priority:
self.entry_width_chang()
else:
self.entry_height_chang()
def apply_scale(self, *arg):
if self.button["state"] == DISABLED:
return
self.proportional()
width = self.var_width.get()
height = self.var_height.get()
br = self.document.selection.coord_rect
hor_sel = br.right - br.left
ver_sel = br.top - br.bottom
cnt_x, cnt_y = self.Basepoint.get_basepoint(hor_sel, ver_sel, br.left,
br.bottom)
h = width / 100
if h == 0:
h = 1
if self.hflip.get():
h = -1 * h
v = height / 100
if v == 0:
v = 1
if self.vflip.get():
v = -1 * v
if arg and arg[0] == 'Duplicate':
self.ScaleAndCopy(h, v, cnt_x, cnt_y)
else:
self.ScaleSelected(h, v, cnt_x, cnt_y)
def apply_to_copy(self):
self.apply_scale('Duplicate')
def is_selection(self):
return (len(self.document.selection) > 0)
def create_std_buttons(self, master):
frame = Frame(master, borderwidth=2)
button = UpdatedButton(frame, text=_("Apply"), command=self.do_apply, sensitivecb=self.can_apply, width=15)
button.pack(side=TOP)
return frame
class MovePanel(PluginPanel):
name = 'Move'
title = _("Move")
def init(self, master):
PluginPanel.init(self, master)
root = self.mw.root
self.var_width_number = DoubleVar(root)
self.var_height_number = DoubleVar(root)
self.var_width_base = DoubleVar(root)
self.var_height_base = DoubleVar(root)
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number,
var_width_unit)
self.var_height = LengthVar(10, unit, self.var_height_number,
var_height_unit)
jump = config.preferences.default_unit_jump
self.var_width.set(0)
self.var_height.set(0)
self.var_width_base.set(0)
self.var_height_base.set(0)
self.var_position = StringVar(root)
self.var_position.set(ABSOLUTE)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side=TOP, fill=BOTH)
#---------------------------------------------------------
# Horisontal size
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='move_h')
label.pack(side=LEFT, padx=5)
self.entry_width = TSpinbox(size_frameH,
var=0,
vartype=1,
textvariable=self.var_width_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_move)
self.entry_width.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH,
style='FlatLabel',
text=self.var_width.unit)
self.labelwunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='move_v')
label.pack(side=LEFT, padx=5)
self.entry_height = TSpinbox(size_frameV,
var=0,
vartype=1,
textvariable=self.var_height_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_move)
self.entry_height.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV,
style='FlatLabel',
text=self.var_height.unit)
self.labelhunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# position chek
self.position_check = TCheckbutton(top,
text=_("Absolute Coordinates"),
variable=self.var_position,
onvalue=ABSOLUTE,
offvalue=RELATIVE,
command=self.position)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top,
labelwidget=label,
style='Labelframe',
borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame,
anchor=self.var_basepoint,
command=self.apply_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame,
style='FlatLabel',
image='coordinate_sys')
label.pack(side=LEFT, fill=BOTH, padx=10)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_move)
self.button.pack(in_=button_frame,
side=BOTTOM,
expand=1,
fill=X,
pady=3)
self.button_copy = UpdatedButton(top,
text=_("Apply to Copy"),
command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
self.document.Subscribe(EDITED, self.update_var)
config.preferences.Subscribe(CHANGED, self.update_pref)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
self.document.Unsubscribe(EDITED, self.update_var)
config.preferences.Unsubscribe(CHANGED, self.update_pref)
def init_from_doc(self, *arg):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_width.set_state(NORMAL)
self.entry_height.set_state(NORMAL)
self.position_check['state'] = NORMAL
self.button['state'] = NORMAL
self.button_copy['state'] = NORMAL
else:
self.entry_width.set_state(DISABLED)
self.entry_height.set_state(DISABLED)
self.position_check['state'] = DISABLED
self.button['state'] = DISABLED
self.button_copy['state'] = DISABLED
self.update_pref()
def apply_basepoint(self):
self.Update()
def position(self):
if self.var_position.get() == ABSOLUTE and self.var_basepoint.get(
) == 'USER':
self.var_basepoint.set('C')
self.update_var()
def apply_move(self, *arg):
if self.button["state"] == DISABLED:
return
try:
var_x = self.var_width.get()
var_y = self.var_height.get()
except:
return
x, y = self.coordinates(self.var_position.get())
if self.var_position.get() == RELATIVE:
if self.var_width_base != self.var_width.get(
) or self.var_height_base != self.var_height.get():
self.var_basepoint.set('USER')
x, y = var_x, var_y
else:
x, y = var_x - x, var_y - y
if arg and arg[0] == 'Duplicate':
self.document.MoveAndCopy(x, y, Point(0, 0))
else:
self.document.MoveSelected(x, y)
def apply_to_copy(self):
self.apply_move('Duplicate')
def coordinates(self, position):
br = self.document.selection.coord_rect
hor_sel = br.right - br.left
ver_sel = br.top - br.bottom
if position == RELATIVE:
left, bottom = -hor_sel / 2, -ver_sel / 2
else:
left, bottom = br.left, br.bottom
cnt_x, cnt_y = self.Basepoint.get_basepoint(hor_sel, ver_sel, left,
bottom)
if position == RELATIVE and cnt_x != None:
return cnt_x * 2, cnt_y * 2
else:
return cnt_x, cnt_y
def update_pref(self, *arg):
self.labelwunit['text'] = config.preferences.default_unit
self.labelhunit['text'] = config.preferences.default_unit
self.entry_width.step = config.preferences.default_unit_jump
self.entry_height.step = config.preferences.default_unit_jump
self.update_var()
def update_var(self, *arg):
if len(self.document.selection.GetInfo()):
if self.var_basepoint.get() == 'USER':
x = self.var_width.get()
y = self.var_height.get()
self.var_width.unit = config.preferences.default_unit
self.var_height.unit = config.preferences.default_unit
self.var_width.set(x)
self.var_height.set(y)
else:
self.var_width.unit = config.preferences.default_unit
self.var_height.unit = config.preferences.default_unit
x, y = self.coordinates(self.var_position.get())
self.var_width.set(x)
self.var_height.set(y)
self.var_width_base = self.var_width.get()
self.var_height_base = self.var_height.get()
def is_selection(self):
return (len(self.document.selection) > 0)
def init(self, master):
PluginPanel.init(self, master)
self.width_priority = 1
root = self.mw.root
self.var_angleX = DoubleVar(root)
self.var_angleY = DoubleVar(root)
jump = 5
self.var_angleX.set(0)
self.var_angleY.set(0)
self.var_proportional = IntVar(root)
self.var_proportional.set(0)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side=TOP, fill=BOTH)
#---------------------------------------------------------
# Horisontal
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='skew_h')
label.pack(side=LEFT, padx=5)
self.entry_angleX = TSpinbox(size_frameH,
var=0,
vartype=1,
textvariable=self.var_angleX,
min=-75,
max=75,
step=jump,
width=10,
command=self.apply_skew)
self.entry_angleX.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH, style='FlatLabel', text=_("deg"))
self.labelwunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='skew_v')
label.pack(side=LEFT, padx=5)
self.entry_angleY = TSpinbox(size_frameV,
var=0,
vartype=1,
textvariable=self.var_angleY,
min=-75,
max=75,
step=jump,
width=10,
command=self.apply_skew)
self.entry_angleY.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV, style='FlatLabel', text=_("deg"))
self.labelhunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top,
labelwidget=label,
style='Labelframe',
borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame,
anchor=self.var_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame,
style='FlatLabel',
image='coordinate_deg')
label.pack(side=LEFT, fill=BOTH, padx=10)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_skew)
self.button.pack(in_=button_frame,
side=BOTTOM,
expand=1,
fill=X,
pady=3)
self.button_copy = UpdatedButton(top,
text=_("Apply to Copy"),
command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
def init(self, master):
PluginPanel.init(self, master)
self.width_priority=1
root=self.mw.root
self.var_width_number=DoubleVar(root)
self.var_height_number=DoubleVar(root)
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number, var_width_unit)
self.var_height = LengthVar(10, unit,self.var_height_number,var_height_unit)
jump=config.preferences.default_unit_jump
self.var_width.set(0)
self.var_height.set(0)
self.var_proportional = IntVar(root)
self.var_proportional.set(0)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side = TOP, fill=BOTH)
#---------------------------------------------------------
# Horisontal size
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side = TOP, fill = BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='size_h')
label.pack(side = LEFT, padx=5)
self.entry_width = TSpinbox(size_frameH, var=0, vartype=1, textvariable = self.var_width_number,
min = 0, max = 50000, step = jump, width = 10, command=self.apply_resize)
self.entry_width.pack(side = LEFT)
self.entry_width.down_button.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.down_button.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.up_button.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.up_button.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<FocusOut>', self.entry_width_chang)
self.entry_width.entry.bind('<FocusIn>', self.entry_width_FocusIn)
self.labelwunit = TLabel(size_frameH, style='FlatLabel', text = self.var_width.unit)
self.labelwunit.pack(side = LEFT, padx=5)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side = TOP, fill = BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='size_v')
label.pack(side = LEFT, padx=5)
self.entry_height = TSpinbox(size_frameV, var=0, vartype=1, textvariable = self.var_height_number,
min = 0, max = 50000, step = jump, width = 10, command=self.apply_resize)
self.entry_height.pack(side = LEFT)
self.entry_height.down_button.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.down_button.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.up_button.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.up_button.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<FocusOut>', self.entry_height_chang)
self.entry_height.entry.bind('<FocusIn>', self.entry_height_FocusIn)
self.labelhunit = TLabel(size_frameV, style='FlatLabel', text = self.var_height.unit)
self.labelhunit.pack(side = LEFT, padx=5)
#---------------------------------------------------------
# Proportional chek
self.proportional_check = TCheckbutton(top, text = _("Proportional"), variable = self.var_proportional, command = self.proportional)
self.proportional_check.pack(side = TOP, anchor=W, padx=5,pady=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text = _("Basepoint:"))
label.pack(side = TOP, fill = BOTH, padx=5)
basepoint_frame=TLabelframe(top, labelwidget=label, style='Labelframe', borderwidth=4)
basepoint_frame.pack(side = TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame, anchor=self.var_basepoint)
self.Basepoint.pack(side = LEFT, fill = BOTH, padx=5)
label = TLabel(basepoint_frame, style='FlatLabel', image = 'coordinate_sys')
label.pack(side = LEFT, fill = BOTH, padx=10)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side = BOTTOM, fill = BOTH)
self.update_buttons = []
self.button = UpdatedButton(top, text = _("Apply"),
command = self.apply_resize)
self.button.pack(in_ = button_frame, side = BOTTOM, expand = 1, fill = X, pady=3)
self.button_copy = UpdatedButton(top, text = _("Apply to Copy"),
command = self.apply_to_copy)
self.button_copy.pack(in_ = button_frame, side = BOTTOM, expand = 1, fill = X)
self.subscribe_receivers()
self.Update()
def init(self, master):
PluginPanel.init(self, master)
root = self.mw.root
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side=TOP, fill=BOTH)
########### APPLY BUTTON ################################################
button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_properties,
sensitivecb=self.is_correct_selection)
button.pack(side=BOTTOM, expand=1, fill=X)
self.Subscribe(SELECTION, button.Update)
########### COLOR BUTTON ################################################
color_frame = TFrame(top, style='FlatFrame', borderwidth=3)
color_frame.pack(side=TOP)
label = TLabel(color_frame, style='FlatLabel', text=_('Color:'))
label.pack(side=LEFT, padx=5)
self.color_button = TColorButton(color_frame,
command=self.show_outline_color)
self.color_button.pack(side=LEFT, padx=5)
self.color_button.set_color((255, 0, 0))
########### LINE WIDTH ##################################################
self.var_width_number = DoubleVar(root)
self.var_width_base = DoubleVar(root)
var_width_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number,
var_width_unit)
line_width_frame = TFrame(top, style='FlatFrame', borderwidth=3)
line_width_frame.pack(side=TOP, fill=BOTH)
self.labelwunit = TLabel(line_width_frame,
style='FlatLabel',
text=self.var_width.unit)
self.labelwunit.pack(side=RIGHT, padx=5)
self.entry_width = TSpinbox(line_width_frame,
var=0,
vartype=1,
textvariable=self.var_width_number,
min=0,
max=50000,
step=.1,
width=8,
command=self.update_pattern)
self.entry_width.pack(side=RIGHT)
label = TLabel(line_width_frame,
style='FlatLabel',
text=_('Line width:'))
label.pack(side=RIGHT, padx=5)
########### LINE STYLE #################################################
style_frame = TFrame(top, style='FlatFrame', borderwidth=5)
style_frame.pack(side=TOP, fill=X)
for item in range(1, 12):
self.dashlist.append("dash%d" % (item))
self.style_button = TOptionMenu(style_frame,
self.dashlist,
command=self.set_dash,
entry_type='image',
style='TComboSmall')
self.style_button.pack(side=RIGHT, fill=X)
label = TLabel(style_frame, style='FlatLabel', text=_('Style:'))
label.pack(side=RIGHT, padx=5)
########################################################################
selection_frame = TFrame(top, style='FlatFrame', borderwidth=1)
selection_frame.pack(side=TOP)
########### CORNERS #####################################################
label = TLabel(selection_frame,
text=" " + _("Corners:") + " ",
style="FlatLabel")
label.pack()
corners_frame = TLabelframe(selection_frame,
labelwidget=label,
style='Labelframe',
borderwidth=8)
corners_frame.pack(side=LEFT, fill=Y, pady=1, padx=1)
self.var_corner = IntVar(root)
radio = UpdatedRadiobutton(corners_frame,
image="join_miter",
variable=self.var_corner,
value=const.JoinMiter,
command=self.update_pattern)
radio.pack(side=TOP, anchor=W, pady=2)
radio = UpdatedRadiobutton(corners_frame,
image="join_round",
variable=self.var_corner,
value=const.JoinRound,
command=self.update_pattern)
radio.pack(side=TOP, anchor=W, pady=2)
radio = UpdatedRadiobutton(corners_frame,
image="join_bevel",
variable=self.var_corner,
value=const.JoinBevel,
command=self.update_pattern)
radio.pack(side=TOP, anchor=W, pady=2)
########### LINE CAPS ###################################################
label = TLabel(selection_frame,
text=" " + _("Line caps:") + " ",
style="FlatLabel")
label.pack()
caps_frame = TLabelframe(selection_frame,
labelwidget=label,
style='Labelframe',
borderwidth=8)
caps_frame.pack(side=RIGHT, fill=Y, pady=1, padx=1)
self.var_caps = IntVar(root)
radio = UpdatedRadiobutton(caps_frame,
image="cap_butt",
variable=self.var_caps,
value=const.CapButt,
command=self.update_pattern)
radio.pack(side=TOP, anchor=W, pady=2)
radio = UpdatedRadiobutton(caps_frame,
image="cap_round",
variable=self.var_caps,
value=const.CapRound,
command=self.update_pattern)
radio.pack(side=TOP, anchor=W, pady=2)
radio = UpdatedRadiobutton(caps_frame,
image="cap_projecting",
variable=self.var_caps,
value=const.CapProjecting,
command=self.update_pattern)
radio.pack(side=TOP, anchor=W, pady=2)
self.var_caps.set(0)
############ BOTTOM BUTTONS #############################################
button_frame = TFrame(top, style='FlatFrame', borderwidth=1)
button_frame.pack(side=BOTTOM, fill=X, pady=5)
button = TButton(button_frame,
style='TSmallbutton',
text=' ',
image='small_colorpicker',
command=self.copy_from)
button.pack(side=LEFT)
tooltips.AddDescription(button, _("Copy From..."))
button = TButton(button_frame,
style='TSmallbutton',
text=' ',
image='restore_color',
command=self.restore_properties)
button.pack(side=LEFT, padx=5)
tooltips.AddDescription(button, _("Restore properties"))
self.var_autoupdate = IntVar(top)
self.var_autoupdate.set(1)
self.autoupdate_check = TCheckbutton(button_frame,
text=_("Auto Update"),
variable=self.var_autoupdate,
command=self.init_from_doc)
self.autoupdate_check.pack(side=RIGHT, anchor=W, padx=10)
#######################################################################
self.set_default_style()
self.init_from_doc()
self.subscribe_receivers()
def init(self, master):
PluginPanel.init(self, master)
root=self.mw.root
top = TFrame(self.panel, style='FlatFrame', borderwidth=5)
top.pack(side = TOP, fill=BOTH)
########### APPLY BUTTON ################################################
button = UpdatedButton(top, text = _("Apply"),
command = self.apply_properties,
sensitivecb = self.is_correct_selection)
button.pack(side = BOTTOM, expand = 1, fill = X)
self.Subscribe(SELECTION, button.Update)
########### COLOR BUTTON ################################################
color_frame = TFrame(top, style='FlatFrame', borderwidth=3)
color_frame.pack(side = TOP)
label = TLabel(color_frame, style='FlatLabel', text=_('Color:'))
label.pack(side = LEFT, padx=5)
self.color_button = TColorButton(color_frame, command=self.show_outline_color)
self.color_button.pack(side = LEFT, padx=5)
self.color_button.set_color((255,0,0))
########### LINE WIDTH ##################################################
self.var_width_number=DoubleVar(root)
self.var_width_base=DoubleVar(root)
var_width_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number, var_width_unit)
line_width_frame = TFrame(top, style='FlatFrame', borderwidth=3)
line_width_frame.pack(side = TOP, fill = BOTH)
self.labelwunit = TLabel(line_width_frame, style='FlatLabel', text = self.var_width.unit)
self.labelwunit.pack(side = RIGHT, padx=5)
self.entry_width = TSpinbox(line_width_frame, var=0, vartype=1, textvariable = self.var_width_number,
min = 0, max = 50000, step = .1, width = 8, command=self.update_pattern)
self.entry_width.pack(side = RIGHT)
label = TLabel(line_width_frame, style='FlatLabel', text=_('Line width:'))
label.pack(side = RIGHT, padx=5)
########### LINE STYLE #################################################
style_frame = TFrame(top, style='FlatFrame', borderwidth=5)
style_frame.pack(side = TOP, fill=X)
for item in range(1,12):
self.dashlist.append("dash%d"%(item))
self.style_button = TOptionMenu(style_frame, self.dashlist, command = self.set_dash,
entry_type = 'image', style='TComboSmall')
self.style_button.pack(side = RIGHT, fill=X)
label = TLabel(style_frame, style='FlatLabel', text=_('Style:'))
label.pack(side = RIGHT, padx=5)
########################################################################
selection_frame = TFrame(top, style='FlatFrame', borderwidth=1)
selection_frame.pack(side = TOP)
########### CORNERS #####################################################
label=TLabel(selection_frame, text=" "+_("Corners:")+" ", style="FlatLabel")
label.pack()
corners_frame=TLabelframe(selection_frame, labelwidget=label, style='Labelframe', borderwidth=8)
corners_frame.pack(side = LEFT, fill=Y, pady=1, padx=1)
self.var_corner = IntVar(root)
radio = UpdatedRadiobutton(corners_frame, image = "join_miter",
variable = self.var_corner,
value = const.JoinMiter,
command = self.update_pattern)
radio.pack(side = TOP, anchor=W, pady=2)
radio = UpdatedRadiobutton(corners_frame, image = "join_round",
variable = self.var_corner,
value = const.JoinRound,
command = self.update_pattern)
radio.pack(side = TOP, anchor=W, pady=2)
radio = UpdatedRadiobutton(corners_frame, image = "join_bevel",
variable = self.var_corner,
value = const.JoinBevel,
command = self.update_pattern)
radio.pack(side = TOP, anchor=W, pady=2)
########### LINE CAPS ###################################################
label=TLabel(selection_frame, text=" "+_("Line caps:")+" ", style="FlatLabel")
label.pack()
caps_frame=TLabelframe(selection_frame, labelwidget=label, style='Labelframe', borderwidth=8)
caps_frame.pack(side = RIGHT, fill=Y, pady=1, padx=1)
self.var_caps = IntVar(root)
radio = UpdatedRadiobutton(caps_frame, image = "cap_butt",
variable = self.var_caps,
value = const.CapButt,
command = self.update_pattern)
radio.pack(side = TOP, anchor=W, pady=2)
radio = UpdatedRadiobutton(caps_frame, image = "cap_round",
variable = self.var_caps,
value = const.CapRound,
command = self.update_pattern)
radio.pack(side = TOP, anchor=W, pady=2)
radio = UpdatedRadiobutton(caps_frame, image = "cap_projecting",
variable = self.var_caps,
value = const.CapProjecting,
command = self.update_pattern)
radio.pack(side = TOP, anchor=W, pady=2)
self.var_caps.set(0)
############ BOTTOM BUTTONS #############################################
button_frame = TFrame(top, style='FlatFrame', borderwidth=1)
button_frame.pack(side = BOTTOM, fill=X, pady=5)
button = TButton(button_frame, style='TSmallbutton', text=' ', image='small_colorpicker', command = self.copy_from)
button.pack(side = LEFT)
tooltips.AddDescription(button, _("Copy From..."))
button = TButton(button_frame, style='TSmallbutton', text=' ', image='restore_color', command = self.restore_properties)
button.pack(side = LEFT, padx=5)
tooltips.AddDescription(button, _("Restore properties"))
self.var_autoupdate = IntVar(top)
self.var_autoupdate.set(1)
self.autoupdate_check = TCheckbutton(button_frame, text = _("Auto Update"), variable = self.var_autoupdate,
command=self.init_from_doc)
self.autoupdate_check.pack(side = RIGHT, anchor=W, padx=10)
#######################################################################
self.set_default_style()
self.init_from_doc()
self.subscribe_receivers()
class RotatePanel(PluginPanel):
name = 'Rotate'
title = _("Rotate")
def init(self, master):
PluginPanel.init(self, master)
root = self.mw.root
self.var_angle = DoubleVar(root)
self.var_angle.set(0)
self.var_width_number = DoubleVar(root)
self.var_height_number = DoubleVar(root)
self.var_width_base = DoubleVar(root)
self.var_height_base = DoubleVar(root)
self.cnt_x_absolute = None
self.cnt_y_absolute = None
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number,
var_width_unit)
self.var_height = LengthVar(10, unit, self.var_height_number,
var_height_unit)
jump = config.preferences.default_unit_jump
self.var_width.set(0)
self.var_height.set(0)
self.var_width_base.set(0)
self.var_height_base.set(0)
self.var_position = StringVar(root)
self.var_position.set(ABSOLUTE)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side=TOP, fill=BOTH)
#---------------------------------------------------------
angle_frame = TFrame(top, style='FlatFrame', borderwidth=3)
angle_frame.pack(side=TOP, fill=BOTH)
label = TLabel(angle_frame,
style='FlatLabel',
text=" " + _("Angle:") + " ")
label.pack(side=LEFT, padx=5)
self.entry_angle = TSpinbox(angle_frame,
var=0,
vartype=1,
textvariable=self.var_angle,
min=-360,
max=360,
step=5,
width=6,
command=self.apply_rotate)
self.entry_angle.pack(side=LEFT, anchor=E)
label = TLabel(angle_frame, style='FlatLabel', text=_("deg"))
label.pack(side=LEFT, padx=5)
#---------------------------------------------------------
label = TLabel(top, style='FlatLabel', text=_("Center:"))
label.pack(side=TOP, fill=BOTH, padx=5)
#---------------------------------------------------------
# Horisontal
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='center_h')
label.pack(side=LEFT, padx=5)
self.entry_width = TSpinbox(size_frameH,
var=0,
vartype=1,
textvariable=self.var_width_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_rotate)
self.entry_width.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH,
style='FlatLabel',
text=self.var_width.unit)
self.labelwunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='center_v')
label.pack(side=LEFT, padx=5)
self.entry_height = TSpinbox(size_frameV,
var=0,
vartype=1,
textvariable=self.var_height_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_rotate)
self.entry_height.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV,
style='FlatLabel',
text=self.var_height.unit)
self.labelhunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# position chek
self.position_check = TCheckbutton(top,
text=_("Absolute Center"),
variable=self.var_position,
onvalue=ABSOLUTE,
offvalue=RELATIVE,
command=self.position)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top,
labelwidget=label,
style='Labelframe',
borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame,
anchor=self.var_basepoint,
command=self.apply_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame,
style='FlatLabel',
image='coordinate_deg')
label.pack(side=LEFT, fill=BOTH, padx=10)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_rotate)
self.button.pack(in_=button_frame,
side=BOTTOM,
expand=1,
fill=X,
pady=3)
self.button_copy = UpdatedButton(top,
text=_("Apply to Copy"),
command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
self.document.Subscribe(EDITED, self.update_var)
config.preferences.Subscribe(CHANGED, self.update_pref)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
self.document.Unsubscribe(EDITED, self.update_var)
config.preferences.Unsubscribe(CHANGED, self.update_pref)
def init_from_doc(self, *arg):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_angle.set_state(NORMAL)
self.entry_width.set_state(NORMAL)
self.entry_height.set_state(NORMAL)
self.position_check['state'] = NORMAL
self.button['state'] = NORMAL
self.button_copy['state'] = NORMAL
self.TestBasepoint()
else:
self.entry_angle.set_state(DISABLED)
self.entry_width.set_state(DISABLED)
self.entry_height.set_state(DISABLED)
self.position_check['state'] = DISABLED
self.button['state'] = DISABLED
self.button_copy['state'] = DISABLED
self.update_pref()
def apply_basepoint(self):
self.update_var()
def position(self):
self.update_var()
def RotateSelected(self, angle, cnt=None):
text = _("Rotation")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
if cnt is None:
cnt = self.document.selection.coord_rect.center()
angle = angle * degrees
trafo = Rotation(angle, cnt)
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def RotateAndCopy(self, angle, cnt=None):
text = _("Rotation&Copy")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
if cnt is None:
cnt = self.document.selection.coord_rect.center()
angle = angle * degrees
trafo = Rotation(angle, cnt)
self.document.ApplyToDuplicate()
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def apply_rotate(self, *arg):
if self.button["state"] == DISABLED:
return
try:
var_x = self.var_width.get()
var_y = self.var_height.get()
var_a = self.var_angle.get()
except:
return
if var_a < 0:
if var_a < -360:
var_a += int(var_a / 360) * 360
var_a += 360
if self.var_basepoint.get() != 'USER':
self.cnt_x_absolute, self.cnt_y_absolute = self.coordinates(
ABSOLUTE)
self.var_basepoint.set('USER')
if self.var_width_base != var_x or self.var_height_base != var_y:
if self.var_position.get() == ABSOLUTE:
self.cnt_x_absolute = var_x
self.cnt_y_absolute = var_y
else:
x, y = self.coordinates(ABSOLUTE, 'C')
self.cnt_x_absolute = var_x + x
self.cnt_y_absolute = var_y + y
self.var_basepoint.set('USER')
if arg and arg[0] == 'Duplicate':
self.RotateAndCopy(var_a,
Point(self.cnt_x_absolute, self.cnt_y_absolute))
else:
self.RotateSelected(
var_a, Point(self.cnt_x_absolute, self.cnt_y_absolute))
def apply_to_copy(self):
self.apply_rotate('Duplicate')
def coordinates(self, position, anchor=None):
br = self.document.selection.coord_rect
hor_sel = br.right - br.left
ver_sel = br.top - br.bottom
if position == RELATIVE:
left, bottom = -hor_sel / 2.0, -ver_sel / 2.0
else:
left, bottom = br.left, br.bottom
cnt_x, cnt_y = self.Basepoint.get_basepoint(hor_sel, ver_sel, left,
bottom, anchor)
return cnt_x, cnt_y
def TestBasepoint(self):
if self.cnt_x_absolute is None:
return
base = ['C', 'NW', 'N', 'NE', 'W', 'E', 'SW', 'S', 'SE']
for b in xrange(len(base)):
cnt_x, cnt_y = self.coordinates(ABSOLUTE, base[b])
if round(cnt_x,2) == round(self.cnt_x_absolute,2) and \
round(cnt_y,2) == round(self.cnt_y_absolute,2):
self.var_basepoint.set(base[b])
return
self.var_basepoint.set('USER')
def update_pref(self, *arg):
self.labelwunit['text'] = config.preferences.default_unit
self.labelhunit['text'] = config.preferences.default_unit
self.entry_width.step = config.preferences.default_unit_jump
self.entry_height.step = config.preferences.default_unit_jump
self.update_var()
def update_var(self, *arg):
if len(self.document.selection.GetInfo()):
self.var_width.unit = config.preferences.default_unit
self.var_height.unit = config.preferences.default_unit
if self.var_basepoint.get() == 'USER':
if self.var_position.get() == ABSOLUTE:
self.var_width.set(self.cnt_x_absolute)
self.var_height.set(self.cnt_y_absolute)
else:
x, y = self.coordinates(ABSOLUTE, 'C')
self.var_width.set(self.cnt_x_absolute - x)
self.var_height.set(self.cnt_y_absolute - y)
else:
x, y = self.coordinates(self.var_position.get())
self.var_width.set(x)
self.var_height.set(y)
self.var_width_base = self.var_width.get()
self.var_height_base = self.var_height.get()
def is_selection(self):
return (len(self.document.selection) > 0)
def init(self, master):
PluginPanel.init(self, master)
root = self.mw.root
self.var_angle = DoubleVar(root)
self.var_angle.set(0)
self.var_width_number = DoubleVar(root)
self.var_height_number = DoubleVar(root)
self.var_width_base = DoubleVar(root)
self.var_height_base = DoubleVar(root)
self.cnt_x_absolute = None
self.cnt_y_absolute = None
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number,
var_width_unit)
self.var_height = LengthVar(10, unit, self.var_height_number,
var_height_unit)
jump = config.preferences.default_unit_jump
self.var_width.set(0)
self.var_height.set(0)
self.var_width_base.set(0)
self.var_height_base.set(0)
self.var_position = StringVar(root)
self.var_position.set(ABSOLUTE)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side=TOP, fill=BOTH)
#---------------------------------------------------------
angle_frame = TFrame(top, style='FlatFrame', borderwidth=3)
angle_frame.pack(side=TOP, fill=BOTH)
label = TLabel(angle_frame,
style='FlatLabel',
text=" " + _("Angle:") + " ")
label.pack(side=LEFT, padx=5)
self.entry_angle = TSpinbox(angle_frame,
var=0,
vartype=1,
textvariable=self.var_angle,
min=-360,
max=360,
step=5,
width=6,
command=self.apply_rotate)
self.entry_angle.pack(side=LEFT, anchor=E)
label = TLabel(angle_frame, style='FlatLabel', text=_("deg"))
label.pack(side=LEFT, padx=5)
#---------------------------------------------------------
label = TLabel(top, style='FlatLabel', text=_("Center:"))
label.pack(side=TOP, fill=BOTH, padx=5)
#---------------------------------------------------------
# Horisontal
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='center_h')
label.pack(side=LEFT, padx=5)
self.entry_width = TSpinbox(size_frameH,
var=0,
vartype=1,
textvariable=self.var_width_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_rotate)
self.entry_width.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH,
style='FlatLabel',
text=self.var_width.unit)
self.labelwunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='center_v')
label.pack(side=LEFT, padx=5)
self.entry_height = TSpinbox(size_frameV,
var=0,
vartype=1,
textvariable=self.var_height_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_rotate)
self.entry_height.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV,
style='FlatLabel',
text=self.var_height.unit)
self.labelhunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# position chek
self.position_check = TCheckbutton(top,
text=_("Absolute Center"),
variable=self.var_position,
onvalue=ABSOLUTE,
offvalue=RELATIVE,
command=self.position)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top,
labelwidget=label,
style='Labelframe',
borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame,
anchor=self.var_basepoint,
command=self.apply_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame,
style='FlatLabel',
image='coordinate_deg')
label.pack(side=LEFT, fill=BOTH, padx=10)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_rotate)
self.button.pack(in_=button_frame,
side=BOTTOM,
expand=1,
fill=X,
pady=3)
self.button_copy = UpdatedButton(top,
text=_("Apply to Copy"),
command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
def init(self, master):
PluginPanel.init(self, master)
top = self.panel
grid_top = TFrame(top, borderwidth=2, style='FlatFrame')
grid_top.pack(side=TOP, expand=1, fill=X)
var_number = DoubleVar(top)
var_unit = StringVar(top)
self.var_pos = LengthVar(1.0,
config.preferences.default_unit,
var_number,
var_unit,
command=self.set_pos)
top1 = TFrame(top, style='FlatFrame')
top1.pack(side=TOP, expand=0, fill=BOTH)
list_frame = TFrame(top1, style="RoundedFrame", borderwidth=5)
list_frame.pack(side=TOP, expand=1, fill=BOTH)
sb_vert = TScrollbar(list_frame)
sb_vert.pack(side=RIGHT, fill=Y)
guides = UpdatedListbox(list_frame,
bg='white',
borderwidth=0,
selectborderwidth=0,
width=20,
height=8)
guides.pack(expand=1, fill=BOTH)
guides.Subscribe(SELECTION, self.select_guide)
sb_vert['command'] = (guides, 'yview')
guides['yscrollcommand'] = (sb_vert, 'set')
self.guides = guides
self.selected = None
pos_frame = TFrame(top1, style='FlatFrame')
pos_frame.pack(side=TOP, expand=0)
top2 = TFrame(pos_frame, height=15, style='FlatFrame')
top2.pack(side=TOP, expand=0, fill=X)
self.var_label = StringVar(top)
self.var_label.set('X: ')
labelunit = UnitLabel(pos_frame)
labelunit.pack(side=RIGHT, expand=0, anchor=W)
label = TLabel(pos_frame, image='space_6', style='FlatLabel')
label.pack(side=RIGHT)
self.entry = TSpinbox(pos_frame,
var=0,
vartype=1,
min=-50000,
max=50000,
step=.1,
width=6,
command=self.pos_changed)
self.entry.pack(side=RIGHT, expand=0, anchor=E)
label = TLabel(pos_frame,
textvariable=self.var_label,
style='FlatLabel')
label.pack(side=RIGHT, expand=0, anchor=E)
frame = TFrame(top1, style='FlatFrame')
frame.pack(side=TOP, fill=X)
top2 = TFrame(frame, height=15, width=120, style='FlatFrame')
top2.pack(side=TOP)
button = UpdatedButton(frame,
text=_("Add Horizontal Guide"),
command=self.add_guide,
args=1)
button.pack(side=TOP)
top2 = TFrame(frame, height=3, style='FlatFrame')
top2.pack(side=TOP, expand=0, fill=X)
button = UpdatedButton(frame,
text=_("Add Vertical Guide"),
command=self.add_guide,
args=0)
button.pack(side=TOP)
top2 = TFrame(frame, height=3, style='FlatFrame')
top2.pack(side=TOP, expand=0, fill=X)
button = UpdatedButton(frame,
text=_("Delete Guide"),
command=self.del_guide)
button.pack(side=TOP)
top2 = TFrame(frame, height=5, style='FlatFrame')
top2.pack(side=TOP, expand=0, fill=X)
app.mw.docmanager.activedoc.Subscribe(GUIDE_LINES, self.init_from_doc)
app.mw.Subscribe(DOCUMENT, self.init_from_doc)
self.init_from_doc()
def init(self, master):
PluginPanel.init(self, master)
top = self.panel
grid_top = TFrame(top, borderwidth=2, style='FlatFrame')
grid_top.pack(side=TOP, expand=1, fill=X)
var_number = DoubleVar(top)
var_unit = StringVar(top)
self.var_pos = LengthVar(1.0, config.preferences.default_unit, var_number, var_unit, command=self.set_pos)
top1 = TFrame(top, style='FlatFrame')
top1.pack(side=TOP, expand=0, fill=BOTH)
list_frame = TFrame(top1, style="RoundedFrame", borderwidth=5)
list_frame.pack(side=TOP, expand=1, fill=BOTH)
sb_vert = TScrollbar(list_frame)
sb_vert.pack(side=RIGHT, fill=Y)
guides = UpdatedListbox(list_frame, bg='white', borderwidth=0, selectborderwidth=0, width=20, height=8)
guides.pack(expand=1, fill=BOTH)
guides.Subscribe(SELECTION, self.select_guide)
sb_vert['command'] = (guides, 'yview')
guides['yscrollcommand'] = (sb_vert, 'set')
self.guides = guides
self.selected = None
pos_frame = TFrame(top1, style='FlatFrame')
pos_frame.pack(side=TOP, expand=0)
top2 = TFrame(pos_frame, height=15, style='FlatFrame')
top2.pack(side=TOP, expand=0, fill=X)
self.var_label = StringVar(top)
self.var_label.set('X: ')
labelunit = UnitLabel(pos_frame)
labelunit.pack(side=RIGHT, expand=0, anchor=W)
label = TLabel(pos_frame, image='space_6', style='FlatLabel')
label.pack(side=RIGHT)
self.entry = TSpinbox(pos_frame, var=0, vartype=1,
min=-50000, max=50000, step=.1, width=6, command=self.pos_changed)
self.entry.pack(side=RIGHT, expand=0, anchor=E)
label = TLabel(pos_frame, textvariable=self.var_label, style='FlatLabel')
label.pack(side=RIGHT, expand=0, anchor=E)
frame = TFrame(top1, style='FlatFrame')
frame.pack(side=TOP, fill=X)
top2 = TFrame(frame, height=15, width=120, style='FlatFrame')
top2.pack(side=TOP)
button = UpdatedButton(frame, text=_("Add Horizontal Guide"), command=self.add_guide, args=1)
button.pack(side=TOP)
top2 = TFrame(frame, height=3, style='FlatFrame')
top2.pack(side=TOP, expand=0, fill=X)
button = UpdatedButton(frame, text=_("Add Vertical Guide"), command=self.add_guide, args=0)
button.pack(side=TOP)
top2 = TFrame(frame, height=3, style='FlatFrame')
top2.pack(side=TOP, expand=0, fill=X)
button = UpdatedButton(frame, text=_("Delete Guide"), command=self.del_guide)
button.pack(side=TOP)
top2 = TFrame(frame, height=5, style='FlatFrame')
top2.pack(side=TOP, expand=0, fill=X)
app.mw.docmanager.activedoc.Subscribe(GUIDE_LINES, self.init_from_doc)
app.mw.Subscribe(DOCUMENT, self.init_from_doc)
self.init_from_doc()
class SkewPanel(PluginPanel):
name = "Skew"
title = _("Skew")
def init(self, master):
PluginPanel.init(self, master)
self.width_priority = 1
root = self.mw.root
self.var_angleX = DoubleVar(root)
self.var_angleY = DoubleVar(root)
jump = 5
self.var_angleX.set(0)
self.var_angleY.set(0)
self.var_proportional = IntVar(root)
self.var_proportional.set(0)
self.var_basepoint = StringVar(root)
self.var_basepoint.set("C")
# ---------------------------------------------------------
top = TFrame(self.panel, style="FlatFrame")
top.pack(side=TOP, fill=BOTH)
# ---------------------------------------------------------
# Horisontal
size_frameH = TFrame(top, style="FlatFrame", borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style="FlatLabel", image="skew_h")
label.pack(side=LEFT, padx=5)
self.entry_angleX = TSpinbox(
size_frameH,
var=0,
vartype=1,
textvariable=self.var_angleX,
min=-75,
max=75,
step=jump,
width=10,
command=self.apply_skew,
)
self.entry_angleX.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH, style="FlatLabel", text=_("deg"))
self.labelwunit.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style="FlatFrame", borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style="FlatLabel", image="skew_v")
label.pack(side=LEFT, padx=5)
self.entry_angleY = TSpinbox(
size_frameV,
var=0,
vartype=1,
textvariable=self.var_angleY,
min=-75,
max=75,
step=jump,
width=10,
command=self.apply_skew,
)
self.entry_angleY.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV, style="FlatLabel", text=_("deg"))
self.labelhunit.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
# Basepoint check
label = TLabel(top, style="FlatLabel", text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top, labelwidget=label, style="Labelframe", borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame, anchor=self.var_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame, style="FlatLabel", image="coordinate_deg")
label.pack(side=LEFT, fill=BOTH, padx=10)
# ---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style="FlatFrame", borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top, text=_("Apply"), command=self.apply_skew)
self.button.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X, pady=3)
self.button_copy = UpdatedButton(top, text=_("Apply to Copy"), command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
def init_from_doc(self):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_angleX.set_state(NORMAL)
self.entry_angleY.set_state(NORMAL)
self.button["state"] = NORMAL
self.button_copy["state"] = NORMAL
else:
self.entry_angleX.set_state(DISABLED)
self.entry_angleY.set_state(DISABLED)
self.button["state"] = DISABLED
self.button_copy["state"] = DISABLED
def SkewSelected(self, axisX=0, axisY=0):
if self.document.selection:
self.document.begin_transaction()
try:
try:
br = self.document.selection.coord_rect
hor_sel = br.right - br.left
ver_sel = br.top - br.bottom
cnt_x, cnt_y = self.Basepoint.get_basepoint(hor_sel, ver_sel, br.left, br.bottom)
text = _("Skew")
ax, ay = tan(axisX), tan(axisY)
sx = 1.0
sy = 1.0 - (ax * ay)
tx = cnt_x * ax
ty = cnt_y * ax * ay - cnt_y * ay
# Move the selection in the coordinates x0 y0
trafo = Trafo(1, 0, 0, 1, -cnt_x, -cnt_y)
# Skew and Scaling
trafo = Trafo(sx, ay, -ax, sy, 0, 0)(trafo)
# Move the selection in the coordinates basepoint
trafo = Trafo(1, 0, 0, 1, cnt_x, cnt_y)(trafo)
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def apply_skew(self, *arg):
if self.button["state"] == DISABLED:
return
try:
angleX = self.var_angleX.get() * degrees
angleY = self.var_angleY.get() * degrees
self.SkewSelected(angleX, angleY)
except:
return
def apply_to_copy(self):
if self.button["state"] == DISABLED:
return
self.document.begin_transaction(_("Skew&Copy"))
try:
try:
self.document.ApplyToDuplicate()
self.apply_skew()
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def is_selection(self):
return len(self.document.selection) > 0
def init(self, master):
PluginPanel.init(self, master)
root = self.mw.root
self.var_angle = DoubleVar(root)
self.var_angle.set(0)
self.var_width_number = DoubleVar(root)
self.var_height_number = DoubleVar(root)
self.var_width_base = DoubleVar(root)
self.var_height_base = DoubleVar(root)
self.cnt_x_absolute = None
self.cnt_y_absolute = None
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number, var_width_unit)
self.var_height = LengthVar(10, unit, self.var_height_number, var_height_unit)
jump = config.preferences.default_unit_jump
self.var_width.set(0)
self.var_height.set(0)
self.var_width_base.set(0)
self.var_height_base.set(0)
self.var_position = StringVar(root)
self.var_position.set(ABSOLUTE)
self.var_basepoint = StringVar(root)
self.var_basepoint.set("C")
# ---------------------------------------------------------
top = TFrame(self.panel, style="FlatFrame")
top.pack(side=TOP, fill=BOTH)
# ---------------------------------------------------------
angle_frame = TFrame(top, style="FlatFrame", borderwidth=3)
angle_frame.pack(side=TOP, fill=BOTH)
label = TLabel(angle_frame, style="FlatLabel", text=" " + _("Angle:") + " ")
label.pack(side=LEFT, padx=5)
self.entry_angle = TSpinbox(
angle_frame,
var=0,
vartype=1,
textvariable=self.var_angle,
min=-360,
max=360,
step=5,
width=6,
command=self.apply_rotate,
)
self.entry_angle.pack(side=LEFT, anchor=E)
label = TLabel(angle_frame, style="FlatLabel", text=_("deg"))
label.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
label = TLabel(top, style="FlatLabel", text=_("Center:"))
label.pack(side=TOP, fill=BOTH, padx=5)
# ---------------------------------------------------------
# Horisontal
size_frameH = TFrame(top, style="FlatFrame", borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style="FlatLabel", image="center_h")
label.pack(side=LEFT, padx=5)
self.entry_width = TSpinbox(
size_frameH,
var=0,
vartype=1,
textvariable=self.var_width_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_rotate,
)
self.entry_width.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH, style="FlatLabel", text=self.var_width.unit)
self.labelwunit.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style="FlatFrame", borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style="FlatLabel", image="center_v")
label.pack(side=LEFT, padx=5)
self.entry_height = TSpinbox(
size_frameV,
var=0,
vartype=1,
textvariable=self.var_height_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_rotate,
)
self.entry_height.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV, style="FlatLabel", text=self.var_height.unit)
self.labelhunit.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
# position chek
self.position_check = TCheckbutton(
top,
text=_("Absolute Center"),
variable=self.var_position,
onvalue=ABSOLUTE,
offvalue=RELATIVE,
command=self.position,
)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
# ---------------------------------------------------------
# Basepoint check
label = TLabel(top, style="FlatLabel", text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top, labelwidget=label, style="Labelframe", borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame, anchor=self.var_basepoint, command=self.apply_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame, style="FlatLabel", image="coordinate_deg")
label.pack(side=LEFT, fill=BOTH, padx=10)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
# ---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style="FlatFrame", borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top, text=_("Apply"), command=self.apply_rotate)
self.button.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X, pady=3)
self.button_copy = UpdatedButton(top, text=_("Apply to Copy"), command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
class RotatePanel(PluginPanel):
name = "Rotate"
title = _("Rotate")
def init(self, master):
PluginPanel.init(self, master)
root = self.mw.root
self.var_angle = DoubleVar(root)
self.var_angle.set(0)
self.var_width_number = DoubleVar(root)
self.var_height_number = DoubleVar(root)
self.var_width_base = DoubleVar(root)
self.var_height_base = DoubleVar(root)
self.cnt_x_absolute = None
self.cnt_y_absolute = None
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number, var_width_unit)
self.var_height = LengthVar(10, unit, self.var_height_number, var_height_unit)
jump = config.preferences.default_unit_jump
self.var_width.set(0)
self.var_height.set(0)
self.var_width_base.set(0)
self.var_height_base.set(0)
self.var_position = StringVar(root)
self.var_position.set(ABSOLUTE)
self.var_basepoint = StringVar(root)
self.var_basepoint.set("C")
# ---------------------------------------------------------
top = TFrame(self.panel, style="FlatFrame")
top.pack(side=TOP, fill=BOTH)
# ---------------------------------------------------------
angle_frame = TFrame(top, style="FlatFrame", borderwidth=3)
angle_frame.pack(side=TOP, fill=BOTH)
label = TLabel(angle_frame, style="FlatLabel", text=" " + _("Angle:") + " ")
label.pack(side=LEFT, padx=5)
self.entry_angle = TSpinbox(
angle_frame,
var=0,
vartype=1,
textvariable=self.var_angle,
min=-360,
max=360,
step=5,
width=6,
command=self.apply_rotate,
)
self.entry_angle.pack(side=LEFT, anchor=E)
label = TLabel(angle_frame, style="FlatLabel", text=_("deg"))
label.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
label = TLabel(top, style="FlatLabel", text=_("Center:"))
label.pack(side=TOP, fill=BOTH, padx=5)
# ---------------------------------------------------------
# Horisontal
size_frameH = TFrame(top, style="FlatFrame", borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style="FlatLabel", image="center_h")
label.pack(side=LEFT, padx=5)
self.entry_width = TSpinbox(
size_frameH,
var=0,
vartype=1,
textvariable=self.var_width_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_rotate,
)
self.entry_width.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH, style="FlatLabel", text=self.var_width.unit)
self.labelwunit.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style="FlatFrame", borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style="FlatLabel", image="center_v")
label.pack(side=LEFT, padx=5)
self.entry_height = TSpinbox(
size_frameV,
var=0,
vartype=1,
textvariable=self.var_height_number,
min=-50000,
max=50000,
step=jump,
width=10,
command=self.apply_rotate,
)
self.entry_height.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV, style="FlatLabel", text=self.var_height.unit)
self.labelhunit.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
# position chek
self.position_check = TCheckbutton(
top,
text=_("Absolute Center"),
variable=self.var_position,
onvalue=ABSOLUTE,
offvalue=RELATIVE,
command=self.position,
)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
# ---------------------------------------------------------
# Basepoint check
label = TLabel(top, style="FlatLabel", text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top, labelwidget=label, style="Labelframe", borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame, anchor=self.var_basepoint, command=self.apply_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame, style="FlatLabel", image="coordinate_deg")
label.pack(side=LEFT, fill=BOTH, padx=10)
self.position_check.pack(side=TOP, anchor=W, padx=5, pady=5)
# ---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style="FlatFrame", borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top, text=_("Apply"), command=self.apply_rotate)
self.button.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X, pady=3)
self.button_copy = UpdatedButton(top, text=_("Apply to Copy"), command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
self.document.Subscribe(EDITED, self.update_var)
config.preferences.Subscribe(CHANGED, self.update_pref)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
self.document.Unsubscribe(EDITED, self.update_var)
config.preferences.Unsubscribe(CHANGED, self.update_pref)
def init_from_doc(self, *arg):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_angle.set_state(NORMAL)
self.entry_width.set_state(NORMAL)
self.entry_height.set_state(NORMAL)
self.position_check["state"] = NORMAL
self.button["state"] = NORMAL
self.button_copy["state"] = NORMAL
self.TestBasepoint()
else:
self.entry_angle.set_state(DISABLED)
self.entry_width.set_state(DISABLED)
self.entry_height.set_state(DISABLED)
self.position_check["state"] = DISABLED
self.button["state"] = DISABLED
self.button_copy["state"] = DISABLED
self.update_pref()
def apply_basepoint(self):
self.update_var()
def position(self):
self.update_var()
def RotateSelected(self, angle, cnt=None):
text = _("Rotation")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
if cnt is None:
cnt = self.document.selection.coord_rect.center()
angle = angle * degrees
trafo = Rotation(angle, cnt)
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def RotateAndCopy(self, angle, cnt=None):
text = _("Rotation&Copy")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
if cnt is None:
cnt = self.document.selection.coord_rect.center()
angle = angle * degrees
trafo = Rotation(angle, cnt)
self.document.ApplyToDuplicate()
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def apply_rotate(self, *arg):
if self.button["state"] == DISABLED:
return
try:
var_x = self.var_width.get()
var_y = self.var_height.get()
var_a = self.var_angle.get()
except:
return
if var_a < 0:
if var_a < -360:
var_a += int(var_a / 360) * 360
var_a += 360
if self.var_basepoint.get() != "USER":
self.cnt_x_absolute, self.cnt_y_absolute = self.coordinates(ABSOLUTE)
self.var_basepoint.set("USER")
if self.var_width_base != var_x or self.var_height_base != var_y:
if self.var_position.get() == ABSOLUTE:
self.cnt_x_absolute = var_x
self.cnt_y_absolute = var_y
else:
x, y = self.coordinates(ABSOLUTE, "C")
self.cnt_x_absolute = var_x + x
self.cnt_y_absolute = var_y + y
self.var_basepoint.set("USER")
if arg and arg[0] == "Duplicate":
self.RotateAndCopy(var_a, Point(self.cnt_x_absolute, self.cnt_y_absolute))
else:
self.RotateSelected(var_a, Point(self.cnt_x_absolute, self.cnt_y_absolute))
def apply_to_copy(self):
self.apply_rotate("Duplicate")
def coordinates(self, position, anchor=None):
br = self.document.selection.coord_rect
hor_sel = br.right - br.left
ver_sel = br.top - br.bottom
if position == RELATIVE:
left, bottom = -hor_sel / 2.0, -ver_sel / 2.0
else:
left, bottom = br.left, br.bottom
cnt_x, cnt_y = self.Basepoint.get_basepoint(hor_sel, ver_sel, left, bottom, anchor)
return cnt_x, cnt_y
def TestBasepoint(self):
if self.cnt_x_absolute is None:
return
base = ["C", "NW", "N", "NE", "W", "E", "SW", "S", "SE"]
for b in xrange(len(base)):
cnt_x, cnt_y = self.coordinates(ABSOLUTE, base[b])
if round(cnt_x, 2) == round(self.cnt_x_absolute, 2) and round(cnt_y, 2) == round(self.cnt_y_absolute, 2):
self.var_basepoint.set(base[b])
return
self.var_basepoint.set("USER")
def update_pref(self, *arg):
self.labelwunit["text"] = config.preferences.default_unit
self.labelhunit["text"] = config.preferences.default_unit
self.entry_width.step = config.preferences.default_unit_jump
self.entry_height.step = config.preferences.default_unit_jump
self.update_var()
def update_var(self, *arg):
if len(self.document.selection.GetInfo()):
self.var_width.unit = config.preferences.default_unit
self.var_height.unit = config.preferences.default_unit
if self.var_basepoint.get() == "USER":
if self.var_position.get() == ABSOLUTE:
self.var_width.set(self.cnt_x_absolute)
self.var_height.set(self.cnt_y_absolute)
else:
x, y = self.coordinates(ABSOLUTE, "C")
self.var_width.set(self.cnt_x_absolute - x)
self.var_height.set(self.cnt_y_absolute - y)
else:
x, y = self.coordinates(self.var_position.get())
self.var_width.set(x)
self.var_height.set(y)
self.var_width_base = self.var_width.get()
self.var_height_base = self.var_height.get()
def is_selection(self):
return len(self.document.selection) > 0
def init(self, master):
PluginPanel.init(self, master)
self.width_priority = 1
root = self.mw.root
self.var_angleX = DoubleVar(root)
self.var_angleY = DoubleVar(root)
jump = 5
self.var_angleX.set(0)
self.var_angleY.set(0)
self.var_proportional = IntVar(root)
self.var_proportional.set(0)
self.var_basepoint = StringVar(root)
self.var_basepoint.set("C")
# ---------------------------------------------------------
top = TFrame(self.panel, style="FlatFrame")
top.pack(side=TOP, fill=BOTH)
# ---------------------------------------------------------
# Horisontal
size_frameH = TFrame(top, style="FlatFrame", borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style="FlatLabel", image="skew_h")
label.pack(side=LEFT, padx=5)
self.entry_angleX = TSpinbox(
size_frameH,
var=0,
vartype=1,
textvariable=self.var_angleX,
min=-75,
max=75,
step=jump,
width=10,
command=self.apply_skew,
)
self.entry_angleX.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH, style="FlatLabel", text=_("deg"))
self.labelwunit.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style="FlatFrame", borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style="FlatLabel", image="skew_v")
label.pack(side=LEFT, padx=5)
self.entry_angleY = TSpinbox(
size_frameV,
var=0,
vartype=1,
textvariable=self.var_angleY,
min=-75,
max=75,
step=jump,
width=10,
command=self.apply_skew,
)
self.entry_angleY.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV, style="FlatLabel", text=_("deg"))
self.labelhunit.pack(side=LEFT, padx=5)
# ---------------------------------------------------------
# Basepoint check
label = TLabel(top, style="FlatLabel", text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top, labelwidget=label, style="Labelframe", borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame, anchor=self.var_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame, style="FlatLabel", image="coordinate_deg")
label.pack(side=LEFT, fill=BOTH, padx=10)
# ---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style="FlatFrame", borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top, text=_("Apply"), command=self.apply_skew)
self.button.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X, pady=3)
self.button_copy = UpdatedButton(top, text=_("Apply to Copy"), command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
class ResizePanel(PluginPanel):
name='Resize'
title = _("Resize")
def init(self, master):
PluginPanel.init(self, master)
self.width_priority=1
root=self.mw.root
self.var_width_number=DoubleVar(root)
self.var_height_number=DoubleVar(root)
var_width_unit = StringVar(root)
var_height_unit = StringVar(root)
unit = config.preferences.default_unit
self.var_width = LengthVar(10, unit, self.var_width_number, var_width_unit)
self.var_height = LengthVar(10, unit,self.var_height_number,var_height_unit)
jump=config.preferences.default_unit_jump
self.var_width.set(0)
self.var_height.set(0)
self.var_proportional = IntVar(root)
self.var_proportional.set(0)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side = TOP, fill=BOTH)
#---------------------------------------------------------
# Horisontal size
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side = TOP, fill = BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='size_h')
label.pack(side = LEFT, padx=5)
self.entry_width = TSpinbox(size_frameH, var=0, vartype=1, textvariable = self.var_width_number,
min = 0, max = 50000, step = jump, width = 10, command=self.apply_resize)
self.entry_width.pack(side = LEFT)
self.entry_width.down_button.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.down_button.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.up_button.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.up_button.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<FocusOut>', self.entry_width_chang)
self.entry_width.entry.bind('<FocusIn>', self.entry_width_FocusIn)
self.labelwunit = TLabel(size_frameH, style='FlatLabel', text = self.var_width.unit)
self.labelwunit.pack(side = LEFT, padx=5)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side = TOP, fill = BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='size_v')
label.pack(side = LEFT, padx=5)
self.entry_height = TSpinbox(size_frameV, var=0, vartype=1, textvariable = self.var_height_number,
min = 0, max = 50000, step = jump, width = 10, command=self.apply_resize)
self.entry_height.pack(side = LEFT)
self.entry_height.down_button.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.down_button.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.up_button.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.up_button.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<FocusOut>', self.entry_height_chang)
self.entry_height.entry.bind('<FocusIn>', self.entry_height_FocusIn)
self.labelhunit = TLabel(size_frameV, style='FlatLabel', text = self.var_height.unit)
self.labelhunit.pack(side = LEFT, padx=5)
#---------------------------------------------------------
# Proportional chek
self.proportional_check = TCheckbutton(top, text = _("Proportional"), variable = self.var_proportional, command = self.proportional)
self.proportional_check.pack(side = TOP, anchor=W, padx=5,pady=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text = _("Basepoint:"))
label.pack(side = TOP, fill = BOTH, padx=5)
basepoint_frame=TLabelframe(top, labelwidget=label, style='Labelframe', borderwidth=4)
basepoint_frame.pack(side = TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame, anchor=self.var_basepoint)
self.Basepoint.pack(side = LEFT, fill = BOTH, padx=5)
label = TLabel(basepoint_frame, style='FlatLabel', image = 'coordinate_sys')
label.pack(side = LEFT, fill = BOTH, padx=10)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side = BOTTOM, fill = BOTH)
self.update_buttons = []
self.button = UpdatedButton(top, text = _("Apply"),
command = self.apply_resize)
self.button.pack(in_ = button_frame, side = BOTTOM, expand = 1, fill = X, pady=3)
self.button_copy = UpdatedButton(top, text = _("Apply to Copy"),
command = self.apply_to_copy)
self.button_copy.pack(in_ = button_frame, side = BOTTOM, expand = 1, fill = X)
self.subscribe_receivers()
self.Update()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
self.document.Subscribe(EDITED, self.update_var)
config.preferences.Subscribe(CHANGED, self.update_pref)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
self.document.Unsubscribe(EDITED, self.update_var)
config.preferences.Unsubscribe(CHANGED, self.update_pref)
def init_from_doc(self, *arg):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_width.set_state(NORMAL)
self.entry_height.set_state(NORMAL)
self.proportional_check['state']=NORMAL
self.button['state']=NORMAL
self.button_copy['state']=NORMAL
else:
self.entry_width.set_state(DISABLED)
self.entry_height.set_state(DISABLED)
self.proportional_check['state']=DISABLED
self.button['state']=DISABLED
self.button_copy['state']=DISABLED
self.var_width.set(0)
self.var_height.set(0)
self.update_pref()
def entry_width_FocusIn(self, *arg):
self.width_priority=1
def entry_height_FocusIn(self, *arg):
self.width_priority=0
def ResizeSelected(self, h, v, cnt_x=None, cnt_y=None):
text = _("Resize")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
if cnt_x is None:
cnt_x=hor_sel/2+br.left
if cnt_y is None:
cnt_y=ver_sel/2+br.bottom
trafo = Trafo(h, 0, 0, v, cnt_x-cnt_x*h, cnt_y-cnt_y*v)
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def ResizeAndCopy(self, h, v, cnt_x=None, cnt_y=None):
text = _("Resize&Copy")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
if cnt_x is None:
cnt_x=hor_sel/2+br.left
if cnt_y is None:
cnt_y=ver_sel/2+br.bottom
trafo = Trafo(h, 0, 0, v, cnt_x-cnt_x*h, cnt_y-cnt_y*v)
self.document.ApplyToDuplicate()
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def entry_height_chang(self, *arg):
if self.var_proportional.get():
try:
height=self.var_height.get()
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
self.var_width.set(hor_sel * height/ver_sel)
except ZeroDivisionError:
return
def entry_width_chang(self, *arg):
if self.var_proportional.get():
try:
width=self.var_width.get()
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
self.var_height.set(ver_sel * width/hor_sel)
except ZeroDivisionError:
return
def proportional(self):
if self.width_priority:
self.entry_width_chang()
else:
self.entry_height_chang()
def apply_resize(self, *arg):
if self.button["state"]==DISABLED:
return
self.proportional()
width=self.var_width.get()
height=self.var_height.get()
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
cnt_x,cnt_y=self.Basepoint.get_basepoint(hor_sel,ver_sel,br.left,br.bottom)
try:
h=width/hor_sel
except ZeroDivisionError:
h=0
try:
v=height/ver_sel
except ZeroDivisionError:
v=0
if arg and arg[0] == 'Duplicate':
self.ResizeAndCopy(h, v, cnt_x, cnt_y)
else:
self.ResizeSelected(h, v, cnt_x, cnt_y)
self.update_var()
def apply_to_copy(self):
self.apply_resize('Duplicate')
def update_pref(self, *arg):
self.labelwunit['text']=config.preferences.default_unit
self.labelhunit['text']=config.preferences.default_unit
self.var_width.unit=config.preferences.default_unit
self.var_height.unit=config.preferences.default_unit
self.entry_width.step=config.preferences.default_unit_jump
self.entry_height.step=config.preferences.default_unit_jump
self.update_var()
def update_var(self, *arg):
if len(self.document.selection.GetInfo()):
br=self.document.selection.coord_rect
width=br.right - br.left
height=br.top - br.bottom
self.var_width.set(width)
self.var_height.set(height)
def is_selection(self):
return (len(self.document.selection) > 0)
def build_dlg(self):
root = self.top
top = TFrame(root, borderwidth=2, style='FlatFrame')
top.pack(side=TOP, expand=0, fill=BOTH)
top2 = TFrame(top, height=3, style='FlatFrame')
top2.pack(side=BOTTOM, expand=0, fill=X)
button = UpdatedButton(top, text=_("Apply style"), command=self.apply_style, sensitivecb=self.can_apply, width=15)
button.pack(side=BOTTOM, expand=0)
self.Subscribe(SELECTION, button.Update)
top2 = TFrame(top, height=3, style='FlatFrame')
top2.pack(side=BOTTOM, expand=0, fill=X)
button = UpdatedButton(top, text=_("Delete style"), command=self.remove_style, sensitivecb=self.can_remove, width=15)
button.pack(side=BOTTOM, expand=0)
top2 = TFrame(top, height=3, style='FlatFrame')
top2.pack(side=BOTTOM, expand=0, fill=X)
button = UpdatedButton(top, text=_("Create new style"), command=self.CreateStyleFromSelection,
sensitivecb=self.main_window.document.CanCreateStyle, width=15)
button.pack(side=BOTTOM, expand=0)
self.Subscribe(SELECTION, button.Update)
top2 = TFrame(top, height=5, style='FlatFrame')
top2.pack(side=BOTTOM, expand=0, fill=X)
list_frame = TFrame(top, style="RoundedFrame", borderwidth=5)
list_frame.pack(side=TOP, expand=1, fill=BOTH)
sb_vert = TScrollbar(list_frame, takefocus=0)
sb_vert.pack(side=RIGHT, fill=Y)
styles = UpdatedListbox(list_frame, bg='white', borderwidth=0, selectborderwidth=0)
styles.pack(expand=1, fill=BOTH)
styles.Subscribe(COMMAND, self.apply_style)
sb_vert['command'] = (styles, 'yview')
styles['yscrollcommand'] = (sb_vert, 'set')
self.styles = styles
root.resizable(width=0, height=0)
class SkewPanel(PluginPanel):
name = 'Skew'
title = _("Skew")
def init(self, master):
PluginPanel.init(self, master)
self.width_priority = 1
root = self.mw.root
self.var_angleX = DoubleVar(root)
self.var_angleY = DoubleVar(root)
jump = 5
self.var_angleX.set(0)
self.var_angleY.set(0)
self.var_proportional = IntVar(root)
self.var_proportional.set(0)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side=TOP, fill=BOTH)
#---------------------------------------------------------
# Horisontal
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='skew_h')
label.pack(side=LEFT, padx=5)
self.entry_angleX = TSpinbox(size_frameH,
var=0,
vartype=1,
textvariable=self.var_angleX,
min=-75,
max=75,
step=jump,
width=10,
command=self.apply_skew)
self.entry_angleX.pack(side=LEFT)
self.labelwunit = TLabel(size_frameH, style='FlatLabel', text=_("deg"))
self.labelwunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side=TOP, fill=BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='skew_v')
label.pack(side=LEFT, padx=5)
self.entry_angleY = TSpinbox(size_frameV,
var=0,
vartype=1,
textvariable=self.var_angleY,
min=-75,
max=75,
step=jump,
width=10,
command=self.apply_skew)
self.entry_angleY.pack(side=LEFT)
self.labelhunit = TLabel(size_frameV, style='FlatLabel', text=_("deg"))
self.labelhunit.pack(side=LEFT, padx=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text=_("Basepoint:"))
label.pack(side=TOP, fill=BOTH, padx=5)
basepoint_frame = TLabelframe(top,
labelwidget=label,
style='Labelframe',
borderwidth=4)
basepoint_frame.pack(side=TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame,
anchor=self.var_basepoint)
self.Basepoint.pack(side=LEFT, fill=BOTH, padx=5)
label = TLabel(basepoint_frame,
style='FlatLabel',
image='coordinate_deg')
label.pack(side=LEFT, fill=BOTH, padx=10)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side=BOTTOM, fill=BOTH)
self.update_buttons = []
self.button = UpdatedButton(top,
text=_("Apply"),
command=self.apply_skew)
self.button.pack(in_=button_frame,
side=BOTTOM,
expand=1,
fill=X,
pady=3)
self.button_copy = UpdatedButton(top,
text=_("Apply to Copy"),
command=self.apply_to_copy)
self.button_copy.pack(in_=button_frame, side=BOTTOM, expand=1, fill=X)
self.init_from_doc()
self.subscribe_receivers()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
def init_from_doc(self):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_angleX.set_state(NORMAL)
self.entry_angleY.set_state(NORMAL)
self.button['state'] = NORMAL
self.button_copy['state'] = NORMAL
else:
self.entry_angleX.set_state(DISABLED)
self.entry_angleY.set_state(DISABLED)
self.button['state'] = DISABLED
self.button_copy['state'] = DISABLED
def SkewSelected(self, axisX=0, axisY=0):
if self.document.selection:
self.document.begin_transaction()
try:
try:
br = self.document.selection.coord_rect
hor_sel = br.right - br.left
ver_sel = br.top - br.bottom
cnt_x, cnt_y = self.Basepoint.get_basepoint(
hor_sel, ver_sel, br.left, br.bottom)
text = _("Skew")
ax, ay = tan(axisX), tan(axisY)
sx = 1.0
sy = 1.0 - (ax * ay)
tx = cnt_x * ax
ty = cnt_y * ax * ay - cnt_y * ay
# Move the selection in the coordinates x0 y0
trafo = Trafo(1, 0, 0, 1, -cnt_x, -cnt_y)
# Skew and Scaling
trafo = Trafo(sx, ay, -ax, sy, 0, 0)(trafo)
# Move the selection in the coordinates basepoint
trafo = Trafo(1, 0, 0, 1, cnt_x, cnt_y)(trafo)
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def apply_skew(self, *arg):
if self.button["state"] == DISABLED:
return
try:
angleX = self.var_angleX.get() * degrees
angleY = self.var_angleY.get() * degrees
self.SkewSelected(angleX, angleY)
except:
return
def apply_to_copy(self):
if self.button["state"] == DISABLED:
return
self.document.begin_transaction(_("Skew&Copy"))
try:
try:
self.document.ApplyToDuplicate()
self.apply_skew()
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def is_selection(self):
return (len(self.document.selection) > 0)
class ScalePanel(PluginPanel):
name='ScaleAndMirror'
title = _("Scale and Mirror")
def init(self, master):
PluginPanel.init(self, master)
self.width_priority=1
root=self.mw.root
self.var_width=DoubleVar(root)
self.var_height=DoubleVar(root)
unit='%'
jump=5
self.var_proportional = IntVar(root)
self.var_proportional.set(0)
self.var_basepoint = StringVar(root)
self.var_basepoint.set('C')
#---------------------------------------------------------
top = TFrame(self.panel, style='FlatFrame')
top.pack(side = TOP, fill=BOTH)
#---------------------------------------------------------
# Horisontal size
size_frameH = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameH.pack(side = TOP, fill = BOTH)
label = TLabel(size_frameH, style='FlatLabel', image='size_h')
label.pack(side = LEFT, padx=5)
self.entry_width = TSpinbox(size_frameH, var=100, vartype=1, textvariable = self.var_width,
min = -30000, max = 30000, step = jump, width = 6, command=self.apply_scale)
self.entry_width.pack(side = LEFT)
self.entry_width.down_button.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.down_button.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.up_button.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.up_button.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<ButtonRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<KeyRelease>', self.entry_width_chang)
self.entry_width.entry.bind('<FocusOut>', self.entry_width_chang)
self.entry_width.entry.bind('<FocusIn>', self.entry_width_FocusIn)
self.labelwunit = TLabel(size_frameH, style='FlatLabel', text = unit)
self.labelwunit.pack(side = LEFT, padx=5)
self.hflip=BooleanVar(root)
self.hflip.set(0)
button = TCheckbutton(size_frameH, image = "pstrip_hflip", style='ToolBarCheckButton', variable = self.hflip, command = None)
button.pack(side = LEFT)
#---------------------------------------------------------
# Vertical
size_frameV = TFrame(top, style='FlatFrame', borderwidth=3)
size_frameV.pack(side = TOP, fill = BOTH)
label = TLabel(size_frameV, style='FlatLabel', image='size_v')
label.pack(side = LEFT, padx=5)
self.entry_height = TSpinbox(size_frameV, var=100, vartype=1, textvariable = self.var_height,
min = -30000, max = 30000, step = jump, width = 6, command=self.apply_scale)
self.entry_height.pack(side = LEFT)
self.entry_height.down_button.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.down_button.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.up_button.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.up_button.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<ButtonRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<KeyRelease>', self.entry_height_chang)
self.entry_height.entry.bind('<FocusOut>', self.entry_height_chang)
self.entry_height.entry.bind('<FocusIn>', self.entry_height_FocusIn)
self.labelhunit = TLabel(size_frameV, style='FlatLabel', text = unit)
self.labelhunit.pack(side = LEFT, padx=5)
self.vflip=BooleanVar(root)
self.vflip.set(0)
button = TCheckbutton(size_frameV, image = "pstrip_vflip", style='ToolBarCheckButton', variable = self.vflip, command = None)
button.pack(side = LEFT)
#---------------------------------------------------------
# Proportional chek
self.proportional_check = TCheckbutton(top, text = _("Proportional"), variable = self.var_proportional, command = self.proportional)
self.proportional_check.pack(side = TOP, anchor=W, padx=5,pady=5)
#---------------------------------------------------------
# Basepoint check
label = TLabel(top, style='FlatLabel', text = _("Basepoint:"))
label.pack(side = TOP, fill = BOTH, padx=5)
basepoint_frame=TLabelframe(top, labelwidget=label, style='Labelframe', borderwidth=4)
basepoint_frame.pack(side = TOP, fill=X, padx=5, pady=2)
self.Basepoint = BasePointSelector(basepoint_frame, anchor=self.var_basepoint)
self.Basepoint.pack(side = LEFT, fill = BOTH, padx=5)
label = TLabel(basepoint_frame, style='FlatLabel', image = 'coordinate_sys')
label.pack(side = LEFT, fill = BOTH, padx=10)
#---------------------------------------------------------
# Button frame
button_frame = TFrame(top, style='FlatFrame', borderwidth=5)
button_frame.pack(side = BOTTOM, fill = BOTH)
self.update_buttons = []
self.button = UpdatedButton(top, text = _("Apply"),
command = self.apply_scale)
self.button.pack(in_ = button_frame, side = BOTTOM, expand = 1, fill = X, pady=3)
self.button_copy = UpdatedButton(top, text = _("Apply to Copy"),
command = self.apply_to_copy)
self.button_copy.pack(in_ = button_frame, side = BOTTOM, expand = 1, fill = X)
self.init_from_doc()
self.subscribe_receivers()
###############################################################################
def subscribe_receivers(self):
self.document.Subscribe(SELECTION, self.Update)
def unsubscribe_receivers(self):
self.document.Unsubscribe(SELECTION, self.Update)
def init_from_doc(self, *arg):
self.Update()
def Update(self, *arg):
if self.is_selection():
self.entry_width.set_state(NORMAL)
self.entry_height.set_state(NORMAL)
self.proportional_check['state']=NORMAL
self.button['state']=NORMAL
self.button_copy['state']=NORMAL
else:
self.entry_width.set_state(DISABLED)
self.entry_height.set_state(DISABLED)
self.proportional_check['state']=DISABLED
self.button['state']=DISABLED
self.button_copy['state']=DISABLED
def entry_width_FocusIn(self, *arg):
self.width_priority=1
def entry_height_FocusIn(self, *arg):
self.width_priority=0
def ScaleSelected(self, h, v, cnt_x=None, cnt_y=None):
text = _("Scale")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
if cnt_x is None:
cnt_x=hor_sel/2+br.left
if cnt_y is None:
cnt_y=ver_sel/2+br.bottom
trafo = Trafo(h, 0, 0, v, cnt_x-cnt_x*h, cnt_y-cnt_y*v)
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def ScaleAndCopy(self, h, v, cnt_x=None, cnt_y=None):
text = _("Scale&Copy")
if self.document.selection:
self.document.begin_transaction(text)
try:
try:
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
if cnt_x is None:
cnt_x=hor_sel/2+br.left
if cnt_y is None:
cnt_y=ver_sel/2+br.bottom
trafo = Trafo(h, 0, 0, v, cnt_x-cnt_x*h, cnt_y-cnt_y*v)
self.document.ApplyToDuplicate()
self.document.TransformSelected(trafo, text)
except:
self.document.abort_transaction()
finally:
self.document.end_transaction()
def entry_height_chang(self, *arg):
if self.var_proportional.get():
self.var_width.set(self.var_height.get())
def entry_width_chang(self, *arg):
if self.var_proportional.get():
self.var_height.set(self.var_width.get())
def proportional(self):
if self.width_priority:
self.entry_width_chang()
else:
self.entry_height_chang()
def apply_scale(self, *arg):
if self.button["state"]==DISABLED:
return
self.proportional()
width=self.var_width.get()
height=self.var_height.get()
br=self.document.selection.coord_rect
hor_sel=br.right - br.left
ver_sel=br.top - br.bottom
cnt_x,cnt_y=self.Basepoint.get_basepoint(hor_sel,ver_sel,br.left,br.bottom)
h=width/100
if h==0:
h=1
if self.hflip.get():
h=-1*h
v=height/100
if v==0:
v=1
if self.vflip.get():
v=-1*v
if arg and arg[0] == 'Duplicate':
self.ScaleAndCopy(h, v, cnt_x, cnt_y)
else:
self.ScaleSelected(h, v, cnt_x, cnt_y)
def apply_to_copy(self):
self.apply_scale('Duplicate')
def is_selection(self):
return (len(self.document.selection) > 0)