def main():
""" Main function """
ups = galaxy_3500.Galaxy3500('b312-ups')
reader = UpsReader(ups)
reader.daemon = True
reader.start()
time.sleep(5)
codenames = [
'b312_ups_temperature', 'b312_ups_kVAPh1', 'b312_ups_kVAPh2',
'b312_ups_kVAPh3', 'b312_ups_output_current_Ph1',
'b312_ups_output_current_Ph2', 'b312_ups_output_current_Ph3',
'b312_ups_input_frequency', 'b312_ups_input_voltage_Ph1',
'b312_ups_input_voltage_Ph2', 'b312_ups_input_voltage_Ph3',
'b312_ups_output_voltage_Ph1', 'b312_ups_output_voltage_Ph2',
'b312_ups_output_voltage_Ph3', 'b312_ups_battery_voltage',
'b312_ups_battery_current', 'b312_ups_battery_state_of_charge',
'b312_ups_output_frequency'
]
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.1, channel=i)
loggers[codenames[i]].start()
socket = DateDataPullSocket('UPS status',
codenames,
timeouts=[5.0] * len(codenames))
socket.start()
live_socket = LiveSocket('UPS Status', codenames)
live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_ups_b312',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def main():
""" Main function """
ups = galaxy_3500.Galaxy3500('b312-ups')
reader = UpsReader(ups)
reader.daemon = True
reader.start()
time.sleep(5)
codenames = ['b312_ups_temperature', 'b312_ups_kVAPh1', 'b312_ups_kVAPh2',
'b312_ups_kVAPh3', 'b312_ups_output_current_Ph1',
'b312_ups_output_current_Ph2', 'b312_ups_output_current_Ph3',
'b312_ups_input_frequency', 'b312_ups_input_voltage_Ph1',
'b312_ups_input_voltage_Ph2', 'b312_ups_input_voltage_Ph3',
'b312_ups_output_voltage_Ph1', 'b312_ups_output_voltage_Ph2',
'b312_ups_output_voltage_Ph3', 'b312_ups_battery_voltage',
'b312_ups_battery_current', 'b312_ups_battery_state_of_charge',
'b312_ups_output_frequency']
loggers = {}
for i in range(0, len(codenames)):
loggers[codenames[i]] = ValueLogger(reader, comp_val=0.1, channel=i)
loggers[codenames[i]].start()
socket = DateDataPullSocket('UPS status', codenames,
timeouts=[5.0] * len(codenames))
socket.start()
live_socket = LiveSocket('UPS Status', codenames)
live_socket.start()
db_logger = ContinuousDataSaver(continuous_data_table='dateplots_ups_b312',
username=credentials.user,
password=credentials.passwd,
measurement_codenames=codenames)
db_logger.start()
time.sleep(5)
while reader.isAlive():
time.sleep(0.25)
for name in codenames:
value = loggers[name].read_value()
socket.set_point_now(name, value)
live_socket.set_point_now(name, value)
if loggers[name].read_trigged():
print(value)
db_logger.save_point_now(name, value)
loggers[name].clear_trigged()
def loop():
global data
data = ""
socket = thread_socket()
socket.start()
dc = dcmotor_thread()
while True:
if(isstr(data)==True):
# print("Input Mode (Start: 1, Suspend: 2, Resume: 3, Exit: 4) \n")
if(data == 'start'):
data = str_to_float(data)
dc.start()
# float_to_str(data)
elif(data == 'suspend'):
dc.Suspend()
elif(data == 'resume'):
dc.Resume()
elif(data == 'exit'):
time.sleep(1)
dc.Exit()
else:
None
def run(self):
self.pword = self.get_pass()
socket = SocketThread(self)
socket.connect()
socket.start()
time.sleep(1)
print ''
BufferThread(self).start()
try:
while not self.event_close.is_set():
time.sleep(0.1)
except (KeyboardInterrupt,SystemExit):
pass
except BaseException:
print traceback.format_exc(e)
self.event_close.set()
if socket.is_alive():
socket.join()
def run(self):
self.pword = self.get_pass()
socket = SocketThread(self)
socket.connect()
socket.start()
time.sleep(1)
print('')
BufferThread(self).start()
try:
while not self.event_close.is_set():
time.sleep(0.1)
except (KeyboardInterrupt,SystemExit):
pass
except BaseException:
print(traceback.format_exc())
self.event_close.set()
if socket.is_alive():
socket.join()
def run(self):
socket = SocketThread(self)
socket.connect()
socket.start()
cmd = self.args.execute or sys.stdin.read()
self.send_queue.put(cmd)
self.send_queue.put('echo '+self.delim)
start = time.time()
try:
while (not self.response
or self.delim not in [x[1] for x in self.response]):
if time.time()-start>self.args.timeout:
raise TimeoutError
time.sleep(0.1)
except TimeoutError:
self.error('Timed out waiting for response.')
except KeyboardInterrupt:
pass
except BaseException as e:
print traceback.format_exc(e)
self.event_close.set()
if socket.is_alive():
socket.join()
for (err,s) in self.response:
if err:
sys.stderr.write(s+'\n')
sys.stderr.flush()
elif s!=self.delim:
print s
if self.errors:
sys.exit(1)
def run(self):
socket = SocketThread(self)
socket.connect()
socket.start()
cmd = self.args.execute or sys.stdin.read()
self.send_queue.put(cmd)
self.send_queue.put('echo '+self.delim)
start = time.time()
try:
while (not self.response
or self.delim not in [x[1] for x in self.response]):
if time.time()-start>self.args.timeout:
raise TimeoutError
time.sleep(0.1)
except TimeoutError:
self.error('Timed out waiting for response.')
except KeyboardInterrupt:
pass
except BaseException as e:
print(traceback.format_exc(e))
self.event_close.set()
if socket.is_alive():
socket.join()
for (err,s) in self.response:
if err:
sys.stderr.write(s+'\n')
sys.stderr.flush()
elif s!=self.delim:
print(s)
if self.errors:
sys.exit(1)
print(" ", end="")
for j in range(0, col):
print("%2d" % j, end="")
print()
print(" ", end="")
for j in range(0, 2 * col + 3):
print("-", end="")
print()
for i in range(0, row):
print("%d |" % i, end="")
for j in range(0, col):
c = board[i][j]
if c == 0:
print(" +", end="")
elif c == 1:
print(" 0", end="")
elif c == 2:
print(" @", end="")
else:
print("ERROR", end="")
print(" |")
print(" ", end="")
for j in range(0, 2 * col + 3):
print("-", end="")
print()
if __name__ == '__main__':
socket = Client()
socket.start()
def run(self):
print(f'Server running on {self.serverHost} with ports: {Server.portMap[self.serverHost]}\n')
for socket in self.sockets:
socket.start()
self.has_logger = True
self.db_logger = db_logger
def add_socket(self, socket):
""" adding the comm socket"""
self.has_socket = True
self.socket = socket
def update_socket_logger(self,):
""" update values"""
if self.has_logger == True:
pass
if self.has_socket == True:
for element in ['filament bias', 'filemant current', 'filament power', 'emission current', 'anode voltage', 'anode power', 'water flow']:
socket.set_point_now(element,self.status[element])
if __name__ == '__main__':
print('Program start')
socket.deamon = True
socket.start()
sc = XRC1000(port='/dev/serial/by-id/usb-1a86_USB2.0-Ser_-if00-port0')
sc.daemon = True
sc.start()
tui = CursesTui(sc)
#tui.daemon = True
tui.start()