def test():
"""CircuitPython Text, Shape & Sprite"""
if implementation.name != 'circuitpython':
print()
print('This demo is for CircuitPython only!')
exit()
try:
# Configuratoin for CS and DC pins:
cs_pin = DigitalInOut(board.P0_15)
dc_pin = DigitalInOut(board.P0_17)
rst_pin = DigitalInOut(board.P0_20)
# Setup SPI bus using hardware SPI:
spi = SPI(clock=board.P0_24, MOSI=board.P0_22)
# Create the SSD1351 display:
display = Display(spi, dc=dc_pin, cs=cs_pin, rst=rst_pin)
display.clear()
# Load Fixed Font
fixed = XglcdFont('fonts/FixedFont5x8.c', 5, 8, letter_count=96)
# Title
WIDTH = 128
text = 'CircuitPython Demo'
# Measure text and center
length = fixed.measure_text(text)
x = int((WIDTH / 2) - (length / 2))
display.draw_text(x, 6, text, fixed, color565(255, 255, 0))
# Draw title outline
display.draw_rectangle(0, 0, 127, 20, color565(0, 255, 0))
# Load sprite
logo = BouncingSprite('images/blinka45x48.raw', 45, 48, 128, 128, 1,
display)
while True:
timer = monotonic()
logo.update_pos()
logo.draw()
# Attempt to set framerate to 30 FPS
timer_dif = .033333333 - (monotonic() - timer)
if timer_dif > 0:
sleep(timer_dif)
except KeyboardInterrupt:
display.cleanup()
display.fill_hrect(water_level + 1, 53, 121 - water_level, 18,
color565(0, 0, 0))
display.draw_text(37, 40,
str(water_level) + '/' + str(MAX_WATER) + ' ',
bally, color565(255, 255, 255))
if spi is None:
spi = SPI(2, baudrate=14500000, sck=Pin(18), mosi=Pin(23))
display = Display(spi, dc=Pin(17), cs=Pin(5), rst=Pin(16))
display.draw_image('MicroPython128x128.raw', 0, 0, 128, 128)
sleep(1)
display.clear()
bally = XglcdFont('Bally7x9.c', 7, 9)
display.draw_text(0, 0, 'Diesel:', bally, color565(255, 255, 255))
display.draw_text(0, 40, 'Vann:', bally, color565(255, 255, 255))
display.draw_text(0, 80, 'Septik:', bally, color565(255, 255, 255))
display.draw_rectangle(0, 12, 120, 20, color565(255, 255, 255))
display.draw_rectangle(0, 52, 120, 20, color565(255, 255, 255))
display.draw_rectangle(0, 92, 120, 20, color565(255, 255, 255))
adc = ADC(Pin(35))
adc.atten(adc.ATTN_11DB) #normalized to 3.3v
while True:
# read_septic()
read_water()
sleep(0.1)
def test():
"""Test code."""
# Baud rate of 14500000 seems about the max
spi = SPI(2, baudrate=14500000, sck=Pin(18), mosi=Pin(23))
print('spi started')
display = Display(spi, dc=Pin(17), cs=Pin(5), rst=Pin(16))
print('display started')
display.clear(color565(64, 0, 255))
sleep(1)
display.clear()
display.draw_hline(10, 127, 63, color565(255, 0, 255))
sleep(1)
display.draw_vline(10, 0, 127, color565(0, 255, 255))
sleep(1)
display.fill_hrect(23, 50, 30, 75, color565(255, 255, 255))
sleep(1)
display.draw_hline(0, 0, 127, color565(255, 0, 0))
sleep(1)
display.draw_line(127, 0, 64, 127, color565(255, 255, 0))
sleep(2)
display.clear()
coords = [[0, 63], [78, 80], [122, 92], [50, 50], [78, 15], [0, 63]]
display.draw_lines(coords, color565(0, 255, 255))
sleep(1)
display.clear()
display.fill_polygon(7, 63, 63, 50, color565(0, 255, 0))
sleep(1)
display.fill_rectangle(0, 0, 15, 127, color565(255, 0, 0))
sleep(1)
display.clear()
display.fill_rectangle(0, 0, 63, 63, color565(128, 128, 255))
sleep(1)
display.draw_rectangle(0, 64, 63, 63, color565(255, 0, 255))
sleep(1)
display.fill_rectangle(64, 0, 63, 63, color565(128, 0, 255))
sleep(1)
display.draw_polygon(3, 96, 96, 30, color565(0, 64, 255), rotate=15)
sleep(3)
display.clear()
display.fill_circle(32, 32, 30, color565(0, 255, 0))
sleep(1)
display.draw_circle(32, 96, 30, color565(0, 0, 255))
sleep(1)
display.fill_ellipse(96, 32, 30, 16, color565(255, 0, 0))
sleep(1)
display.draw_ellipse(96, 96, 16, 30, color565(255, 255, 0))
sleep(5)
display.cleanup()