def check_slave_ap_group1_portal_function(self, NG2_ssid, password, wlan,
eth):
#7000新建一个网络组，vid设为2,开启dhcp server
tmp1 = NGBusiness(self.driver)
tmp1.mixed_7000_new_NG()
#76xx上新建一个网络组，vid为2
self.driver.get(data_basic['DUT_web'])
self.driver.implicitly_wait(60)
self.driver.refresh()
time.sleep(10)
tmp2 = SSIDBusiness(self.driver)
tmp2.new_vlan_ssid(NG2_ssid, password, "2")
#开启group1的强制门户认证
tmp2.click_ssid_portal(2)
#slave ap加入所有的网络组
tmp3 = APSBusiness(self.driver)
tmp3.add_slave_to_all_NG()
#使用免认证的规则，访问腾讯首页，判断是否跳转到portal页面
result = CPBusiness.check_jump_to_No_auth_portal(
self, NG2_ssid, password, wlan, eth)
#刷新页面重新登录ap页面
Lg = LoginBusiness(self.driver)
Lg.refresh_login_ap()
#删除ssid1
tmp2.del_all_NG()
#删除7000新建的网络组
tmp1.mixed_7000_del_NG()
print result
return result
def check_group1_radius_portal_function(self, NG2_ssid, password, wlan,
eth, t, radius_name,
radius_password):
#7000新建一个网络组，vid设为2,开启dhcp server
tmp1 = NGBusiness(self.driver)
tmp1.mixed_7000_new_NG()
#76xx上新建一个网络组，vid为2
self.driver.get(data_basic['DUT_web'])
self.driver.implicitly_wait(60)
self.driver.refresh()
time.sleep(10)
tmp3 = SSIDBusiness(self.driver)
tmp3.new_vlan_ssid(NG2_ssid, password, "2")
#开启ssid1的强制门户认证
tmp3.click_ssid_portal(2)
#master ap加入所有的网络组
tmp2 = APSBusiness(self.driver)
tmp2.add_master_to_all_NG()
#验证默认list：grandstream中的radius认证的有效性
portal_title,redirect_title,again_title,expiration_title = \
CPBusiness.check_radius_portal(self,NG2_ssid,password,
wlan,eth,t,radius_name,radius_password)
#刷新页面重新登录ap页面
Lg = LoginBusiness(self.driver)
Lg.refresh_login_ap()
#删除master ap的ssid1
tmp3.del_all_NG()
#删除7000新建的网络组
tmp1.mixed_7000_del_NG()
return portal_title, redirect_title, again_title, expiration_title
def check_open_close_many_groups_captive_portal_function(
self, group0_ssid, group1_ssid, group2_ssid, password, wlan, eth):
result = []
tmp1 = SSIDBusiness(self.driver)
for i in range(2):
#点击group0的强制门户认证
#点击三个网络组的强制门户认证
tmp1.click_many_group_portal(3)
#使用免认证的规则，访问腾讯首页，判断是否跳转到portal页面
for j in [group0_ssid, group1_ssid, group2_ssid]:
result1 = CPBusiness.check_jump_to_No_auth_portal(
self, j, password, wlan, eth)
result.append(result1)
#测试完成一遍后，再次登录ap页面，为后续循环测试做好准备
#刷新页面重新登录ap页面
Lg = LoginBusiness(self.driver)
Lg.refresh_login_ap()
time.sleep(30)
#删除master ap的两个ssid
tmp1 = SSIDBusiness(self.driver)
tmp1.del_all_NG()
#删除7000新建的两个网络组
tmp2 = NGBusiness(self.driver)
tmp2.mixed_7000_del_NG()
print result
return result
def test_012_disconnect_clients_info(self):
u"""无线网卡断开ap后，查看客户端信息(testlink_ID:501)"""
log.debug("012")
tmp = ClientsBusiness(self.driver)
#无线网卡断开已连接的AP
tmp.wlan_disable(data_basic['wlan_pc'])
#获取客户端的mac地址
result1 = tmp.check_client(data_basic['wlan_pc'])
wlan_mac = tmp.get_wlan_mac(data_basic['wlan_pc'])
result2 = tmp.get_offline_status(wlan_mac)
print result1, result2
#删除SSID1
tmp1 = SSIDBusiness(self.driver)
tmp1.del_all_NG()
#使用无线网卡能够连接上ssid,并正常使用
tmp.wlan_enable(data_basic['wlan_pc'])
tmp.connect_WPA_AP(data_wireless['all_ssid'],
data_wireless['short_wpa'], data_basic['wlan_pc'])
assert result1 and (
(u"离线" or 'Offline')
in result2), "test after disconnecting ap,test fail!"
print "test after disconnecting ap,test pass!"
def test_052_master_cameback_can_update_configuration(self):
u"""当master ap回来后，确认能够修改配置(testlink_ID:2406)"""
log.debug("052")
tmp1 = SSIDBusiness(self.driver)
#删除所有的网络组
tmp1.del_all_NG()
#修改group0的ssid
ssid = data_wireless['all_ssid']+"-9"
tmp1.change_wifi_ssid_key(ssid,data_wireless['short_wpa'])
#检查ssid是否修改成功
result1 = tmp1.check_NG_ssid(data_basic["DUT_ip"],
data_basic["sshUser"], data_login['all'])
result2 = tmp1.check_NG_ssid(data_basic["slave_ip1"],
data_basic["sshUser"], data_login['all'])
result3 = tmp1.check_NG_ssid(data_basic["slave_ip2"],
data_basic["sshUser"], data_login['all'])
time.sleep(60)
#解除slave1,slave2的配对
tmp = APSBusiness(self.driver)
tmp.unpair_last_slave_ap(2)
self.assertIn(ssid, result1)
self.assertIn(ssid, result2)
self.assertIn(ssid, result3), "when master ap came back,check can update configuration,test fail!"
print "when master ap came back,check can update configuration,test pass!"