def get(self):
p = self.settings.poller
g = StateGraph(ROOM.environment)
g.add((SHUTTLEPRO['shuttle'], ROOM['angle'],
Literal(p.currentShuttleAngle)))
g.add((SHUTTLEPRO['dial'], ROOM['totalDialMovement'],
Literal(p.totalDialMovement)))
self.set_header('Content-type', 'application/x-trig')
self.write(g.asTrig())
def graph():
host = socket.gethostname()
g = StateGraph(ctx=DEV['dpms/%s' % host])
g.add((URIRef("http://bigasterisk.com/host/%s/monitor" % host),
ROOM['powerStateMeasured'],
ROOM[getMonitorState()]))
response.set_header('Content-type', 'application/x-trig')
return g.asTrig()
def get(self):
p = self.settings.poller
g = StateGraph(ROOM.environment)
g.add((SHUTTLEPRO['shuttle'], ROOM['angle'],
Literal(p.currentShuttleAngle)))
g.add((SHUTTLEPRO['dial'], ROOM['totalDialMovement'],
Literal(p.totalDialMovement)))
self.set_header('Content-type', 'application/x-trig')
self.write(g.asTrig())
def get(self):
self.set_header("Content-Type", "application/x-trig")
g = StateGraph(ROOM['garageArduino'])
self.settings.poller.assertIsCurrent()
g.add((DEV['frontDoorMotion'], ROOM['state'],
ROOM['motion'] if self.settings.poller.lastValues['motion'] else
ROOM['noMotion']))
g.add((ROOM['house'], ROOM['usingPower'],
Literal(self.settings.poller.lastWatts, datatype=ROOM["#watts"])))
self.write(g.asTrig())
def get(self):
self.set_header("Content-type", "application/x-trig")
g = StateGraph(ctx=DEV["xidle/%s" % host])
ms = xss.get_info().idle
subj = URIRef("http://bigasterisk.com/host/%s/xidle" % host)
g.add((subj, ROOM["idleTimeMs"], Literal(ms)))
g.add((subj, ROOM["idleTimeMinutes"], Literal(ms / 1000 / 60)))
self.write(g.asTrig())
def get(self):
self.set_header("Content-Type", "application/x-trig")
g = StateGraph(ROOM["bedroomArduino"])
self.settings.poller.assertIsCurrent()
g.add(
(
DEV["bedroomMotion"],
ROOM["state"],
ROOM["motion"] if self.settings.poller.lastValues["motion"] else ROOM["noMotion"],
)
)
self.write(g.asTrig())
def getGraph(request):
g = StateGraph(ROOM.busybox)
g.add((ROOM.busybox, ROOM.localHour, Literal('x')))
for attr in ['slider1', 'slider2', 'slider3', 'slider4']:
# needs: smoothing, exp curve correction
g.add((ROOM['busybox/%s' % attr], ROOM.value, Literal(round(poller.last[attr] / 1021, 3))))
g.add((ROOM['busybox/motion'], ROOM.value, Literal(poller.last['motion'])))
request.setHeader('Content-type', 'application/x-trig')
return g.asTrig()
def get(self):
g = StateGraph(ctx=DEV['frontDoorArduino'])
board = self.settings.board
g.add((DEV['frontDoorOpen'], ROOM['state'],
ROOM['open'] if board.getDoor() == 'open' else ROOM['closed']))
g.add((DEV['frontYardLight'], ROOM['state'],
ROOM['on'] if board.getYardLight() else ROOM['off']))
g.add((DEV['frontDoorLcd'], ROOM['text'],
Literal(board.getLcd())))
g.add((DEV['frontDoorLcd'], ROOM['brightness'],
Literal(board.getLcdBrightness())))
# not temperature yet because it's slow and should be cached from
# the last poll
self.set_header('Content-type', 'application/x-trig')
self.write(g.asTrig())
def get(self):
g = StateGraph(ctx=DEV['houseSensors'])
frontDoorDefer = getPage("http://slash:9080/door", timeout=2) # head start?
doorOpen = int((yield getPage("http://bang:9056/pin/d9", timeout=1)))
g.add((DEV['theaterDoorOpen'], ROOM['state'],
ROOM['open'] if doorOpen else ROOM['closed']))
for s in self.motionStatements(
currentMotion=int((yield getPage("http://bang:9056/pin/d10",
timeout=1)))):
g.add(s)
try:
for s in (yield self.getBedroomStatements()):
g.add(s)
except ConnectError, e:
g.add((ROOM['bedroomStatementFetch'], ROOM['error'],
Literal("getBedroomStatements: %s" % e)))
def get(self):
log.debug("start graph")
g = StateGraph(URIRef("http://bigasterisk.com/map"))
for user in [URIRef("http://bigasterisk.com/foaf.rdf#drewp"),
URIRef("http://bigasterisk.com/kelsi/foaf.rdf#kelsi"),
]:
log.debug("find points for %s", user)
pt = list(mongo.find({'user':user}, sort=[TIME_SORT], limit=1))
if not pt:
continue
pt = pt[0]
t = datetime.datetime.fromtimestamp(
pt_sec(pt), tzutc()).astimezone(tzlocal())
g.add((user, MAP['lastSeen'], Literal(t)))
ago = int(time.time() - pt_sec(pt))
g.add((user, MAP['lastSeenAgoSec'], Literal(ago)))
g.add((user, MAP['lastSeenAgo'], Literal(
"%s seconds" % ago if ago < 60 else
("%.1f minutes" % (ago / 60) if ago < 3600 else
("%.1f hours" % (ago / 3600))))))
log.debug("describeLocationFull")
desc, targetUri, targetName, dist = describeLocationFull(
config,
pt['longitude'], pt['latitude'],
pt.get('horizAccuracy', pt.get('accuracy', 0)),
str(user))
g.add((user, MAP['lastNear'], targetUri))
g.add((targetUri, RDFS.label, Literal(targetName)))
g.add((user, MAP['lastDesc'], Literal(desc)))
g.add((user, MAP['distanceToHomeM'], Literal(metersFromHome(
config, user, pt['longitude'], pt['latitude']))))
if ago < 60*15:
g.add((user, MAP['recentlyNear'], targetUri))
log.debug("added %s", user)
self.set_header("content-type", 'application/x-trig')
ret = g.asTrig()
log.debug("return graph")
self.write(ret)
try:
infos = serv.supervisor.getAllProcessInfo()
except Exception, e:
pass
else:
break
else:
raise e
graph = StateGraph(ctx=CL['supervisors'])
for p in infos:
# this uri design is not very good yet. should just be
# host->supinstance->processid
processUri = URIRef("http://bigasterisk.com/magma/sup/%s/%s" %
(addr, p['name']))
graph.add((processUri, RDF.type,
URIRef("http://bigasterisk.com/ns/command/v1#Process")))
if p['name'].startswith("cmd_"):
graph.add(
(processUri, RDF.type,
URIRef(
"http://bigasterisk.com/ns/command/v1#CommandProcess")
))
graph.add((processUri, RDFS.label, Literal(p['name'])))
state = URIRef('http://supervisord.org/config#%s' % p['statename'])
graph.add((processUri, CL.state, state))
graph.add((state, RDFS.label, Literal(p['statename'])))
# return status and some log tail
self.set_header('Content-Type', 'application/x-trig')
self.write(graph.asTrig())
try:
infos = serv.supervisor.getAllProcessInfo()
except Exception, e:
pass
else:
break
else:
raise e
graph = StateGraph(ctx=CL['supervisors'])
for p in infos:
# this uri design is not very good yet. should just be
# host->supinstance->processid
processUri = URIRef("http://bigasterisk.com/magma/sup/%s/%s" %
(addr, p['name']))
graph.add((processUri, RDF.type,
URIRef("http://bigasterisk.com/ns/command/v1#Process")))
if p['name'].startswith("cmd_"):
graph.add((processUri, RDF.type,
URIRef("http://bigasterisk.com/ns/command/v1#CommandProcess")))
graph.add((processUri, RDFS.label, Literal(p['name'])))
state = URIRef('http://supervisord.org/config#%s' % p['statename'])
graph.add((processUri, CL.state, state))
graph.add((state, RDFS.label, Literal(p['statename'])))
# return status and some log tail
self.set_header('Content-Type', 'application/x-trig')
self.write(graph.asTrig())
class Application(cyclone.web.Application):
def __init__(self, args):
def get(self):
g = StateGraph(ctx=DEV['wifi'])
# someday i may also record specific AP and their strength,
# for positioning. But many users just want to know that the
# device is connected to some bigasterisk AP.
aps = URIRef("http://bigasterisk.com/wifiAccessPoints")
age = time.time() - self.settings.poller.lastPollTime
if age > 10:
raise ValueError("poll data is stale. age=%s" % age)
for dev in self.settings.poller.lastAddrs:
if not dev.get('connected'):
continue
uri = URIRef("http://bigasterisk.com/mac/%s" % dev['mac'].lower())
g.add((uri, ROOM['macAddress'], Literal(dev['mac'].lower())))
g.add((uri, ROOM['connected'], aps))
if 'clientHostname' in dev:
g.add((uri, ROOM['wifiNetworkName'], Literal(dev['clientHostname'])))
if 'name' in dev:
g.add((uri, ROOM['deviceName'], Literal(dev['name'])))
if 'signal' in dev:
g.add((uri, ROOM['signalStrength'], Literal(dev['signal'])))
try:
conn = whenConnected(self.settings.mongo, dev['mac'])
except ValueError:
pass
else:
g.add((uri, ROOM['connectedAgo'],
Literal(connectedAgoString(conn))))
g.add((uri, ROOM['connected'], Literal(conn)))
self.set_header('Content-type', 'application/x-trig')
self.write(g.asTrig())
def get(self):
pruneExpired = bool(self.get_argument('pruneExpired', ''))
g = StateGraph(ctx=DEV['dhcp'])
now = datetime.datetime.now()
for mac, lease in IscDhcpLeases('/var/lib/dhcp/dhcpd.leases'
).get_current().items():
if pruneExpired and lease.end < now:
continue
uri = URIRef("http://bigasterisk.com/dhcpLease/%s" % lease.ethernet)
g.add((uri, RDF.type, ROOM['DhcpLease']))
g.add((uri, ROOM['leaseStartTime'], timeLiteral(lease.start)))
g.add((uri, ROOM['leaseEndTime'], timeLiteral(lease.end)))
ip = URIRef("http://bigasterisk.com/localNet/%s/" % lease.ip)
g.add((uri, ROOM['assignedIp'], ip))
g.add((ip, RDFS.label, Literal(lease.ip)))
mac = URIRef("http://bigasterisk.com/mac/%s" % lease.ethernet)
g.add((uri, ROOM['ethernetAddress'], mac))
g.add((mac, ROOM['macAddress'], Literal(lease.ethernet)))
if lease.hostname:
g.add((mac, ROOM['dhcpHostname'], Literal(lease.hostname)))
self.set_header('Content-Type', 'application/x-trig')
self.write(g.asTrig())
