def reboot(dm):
cwd = os.getcwd()
deviceName = os.path.basename(cwd)
errorFile = os.path.join(cwd, '..', 'error.flg')
proxyIP = getOurIP()
proxyPort = calculatePort()
if 'panda' not in deviceName:
# Attempt to set devicename via env variable 'SUT_NAME'
sname = os.getenv('SUT_NAME')
if sname.strip():
deviceName = sname.strip()
else:
log.info("Unable to find a proper devicename, will attempt to "
"reboot device")
if dm is not None:
try:
dm.getInfo('process')
log.info(
dm._runCmds([{
'cmd': 'exec su -c "logcat -d -v time *:W"'
}],
timeout=10))
except:
log.info("Failure trying to run logcat on device")
else:
log.info("We were unable to connect to device %s, skipping logcat" %
deviceName)
try:
log.info('forcing device %s reboot' % deviceName)
status = powermanagement.soft_reboot_and_verify(dm=dm,
device=deviceName,
ipAddr=proxyIP,
port=proxyPort,
silent=True)
log.info(status)
except:
log.info("Failure while rebooting device")
setFlag(errorFile,
"Remote Device Error: Device failed to recover after reboot",
True)
return 1
sys.stdout.flush()
return 0
def reboot(dm):
cwd = os.getcwd()
deviceName = os.path.basename(cwd)
errorFile = os.path.join(cwd, '..', 'error.flg')
proxyIP = getOurIP()
proxyPort = calculatePort()
if 'panda' not in deviceName:
# Attempt to set devicename via env variable 'SUT_NAME'
sname = os.getenv('SUT_NAME')
if sname.strip():
deviceName = sname.strip()
else:
log.info("Unable to find a proper devicename, will attempt to "
"reboot device")
if dm is not None:
try:
dm.getInfo('process')
log.info(dm._runCmds(
[{'cmd': 'exec su -c "logcat -d -v time *:W"'}], timeout=10))
except:
log.info("Failure trying to run logcat on device")
else:
log.info("We were unable to connect to device %s, skipping logcat" %
deviceName)
try:
log.info('forcing device %s reboot' % deviceName)
status = powermanagement.soft_reboot_and_verify(
dm=dm,
device=deviceName,
ipAddr=proxyIP,
port=proxyPort,
silent=True
)
log.info(status)
except:
log.info("Failure while rebooting device")
setFlag(errorFile,
"Remote Device Error: Device failed to recover after reboot",
True)
return 1
sys.stdout.flush()
return 0
# Moar data!
dm.debug = 3
devRoot = dm.getDeviceRoot()
# checking for /mnt/sdcard/...
print "devroot %s" % devRoot
if devRoot is None or devRoot == '/tests':
setFlag(errorFile, "Remote Device Error: devRoot from devicemanager [%s] is not correct - exiting" % devRoot)
sys.exit(1)
width, height = getResolution(dm)
print("current resolution X:%d Y:%d" % (width, height))
# adjust resolution up if we are part of a reftest run
if (testname == 'reftest') and width < refWidth:
if dm.adjustResolution(width=refWidth, height=refHeight, type='crt'):
if not powermanagement.soft_reboot_and_verify(dm=dm, device=deviceName, ipAddr=proxyIP, port=proxyPort):
print("Remote Device Error: Timed out while waiting for device to come back after resolution change.")
sys.exit(1)
width, height = getResolution(dm)
print("current resolution X:%d Y:%d" % (width, height))
if width != refWidth and height != refHeight:
setFlag(
errorFile,
"Remote Device Error: current resolution X:%d Y:%d does "
"not match what was set X:%d Y:%d"
% (width, height, refWidth, refHeight)
)
sys.exit(1)
def one_time_setup(ip_addr, major_source):
''' One time setup of state
ip_addr - of the device we want to install app at
major_source - we've hacked this script to install
may-also-be-needed tools, but the source we're asked to
install has the meta data we need
Side Effects:
global, needed for error reporting:
errorFile
'''
# set up the flag files, used throughout
cwd = os.getcwd()
global errorFile
errorFile = os.path.join(cwd, '..', 'error.flg')
deviceName = os.path.basename(cwd)
proxyIP = getOurIP()
proxyPort = calculatePort()
workdir = os.path.dirname(major_source)
inifile = os.path.join(workdir, 'fennec', 'application.ini')
remoteappini = os.path.join(workdir, 'talos', 'remoteapp.ini')
log.info('copying %s to %s' % (inifile, remoteappini))
runCommand(['cp', inifile, remoteappini])
log.info("connecting to: %s" % ip_addr)
dm = devicemanager.DeviceManagerSUT(ip_addr)
# Moar data!
dm.debug = 3
devRoot = checkDeviceRoot(dm)
if devRoot is None or devRoot == '/tests':
setFlag(
errorFile,
"Remote Device Error: devRoot from devicemanager [%s] is not correct - exiting"
% devRoot)
return None, None
try:
log.info("%s, %s" % (proxyIP, proxyPort))
getDeviceTimestamp(dm)
setDeviceTimestamp(dm)
getDeviceTimestamp(dm)
dm.getInfo('process')
dm.getInfo('memory')
dm.getInfo('uptime')
width, height = getResolution(dm)
# adjust resolution down to allow fennec to install without memory
# issues
if (width == 1600 or height == 1200):
dm.adjustResolution(1024, 768, 'crt')
log.info('forcing device reboot')
if not powermanagement.soft_reboot_and_verify(
device=deviceName, dm=dm, ipAddr=proxyIP, port=proxyPort):
return None, None
width, height = getResolution(dm)
if width != 1024 and height != 768:
setFlag(
errorFile,
"Remote Device Error: Resolution change failed. Should be %d/%d but is %d/%d"
% (1024, 768, width, height))
return None, None
except devicemanager.AgentError, err:
log.error(
"remoteDeviceError: while doing one time setup for installation: %s"
% err)
return None, None
try:
if 'panda' in device:
dm.uninstallApp(package_basename)
reboot_needed = True
else:
dm.uninstallAppAndReboot(package_basename)
waitForDevice(dm)
except devicemanager.DMError, err:
setFlag(errorFile,
"Remote Device Error: Unable to uninstall %s and reboot: %s" % (package_basename, err))
return RETCODE_ERROR
finally:
break # Don't try this proc again, since we already matched
if reboot_needed:
if not powermanagement.soft_reboot_and_verify(device, dm):
# NOTE: powermanagement.soft_reboot_and_verify will setFlag if needed
return RETCODE_ERROR
# Now Verify that they are all gone
packages = dm._runCmds([{'cmd': 'exec pm list packages'}])
for package in packages.split('\n'):
for proc in processNames:
if package == "package:%s" % proc:
setFlag(errorFile, "Remote Device Error: Unable to properly uninstall %s" % proc)
return RETCODE_ERROR
devRoot = checkDeviceRoot(dm)
if not str(devRoot).startswith("/mnt/sdcard"):
setFlag(errorFile, "Remote Device Error: devRoot from devicemanager [%s] is not correct" % str(devRoot))
def one_time_setup(ip_addr, major_source):
''' One time setup of state
ip_addr - of the device we want to install app at
major_source - we've hacked this script to install
may-also-be-needed tools, but the source we're asked to
install has the meta data we need
Side Effects:
global, needed for error reporting:
errorFile
'''
# set up the flag files, used throughout
cwd = os.getcwd()
global errorFile
errorFile = os.path.join(cwd, '..', 'error.flg')
deviceName = os.path.basename(cwd)
proxyIP = getOurIP()
proxyPort = calculatePort()
workdir = os.path.dirname(major_source)
inifile = os.path.join(workdir, 'fennec', 'application.ini')
remoteappini = os.path.join(workdir, 'talos', 'remoteapp.ini')
log.info('copying %s to %s' % (inifile, remoteappini))
runCommand(['cp', inifile, remoteappini])
log.info("connecting to: %s" % ip_addr)
dm = devicemanager.DeviceManagerSUT(ip_addr)
# Moar data!
dm.debug = 3
devRoot = checkDeviceRoot(dm)
if devRoot is None or devRoot == '/tests':
setFlag(errorFile, "Remote Device Error: devRoot from devicemanager [%s] is not correct - exiting" % devRoot)
return None, None
try:
log.info("%s, %s" % (proxyIP, proxyPort))
getDeviceTimestamp(dm)
setDeviceTimestamp(dm)
getDeviceTimestamp(dm)
dm.getInfo('process')
dm.getInfo('memory')
dm.getInfo('uptime')
width, height = getResolution(dm)
# adjust resolution down to allow fennec to install without memory
# issues
if (width == 1600 or height == 1200):
dm.adjustResolution(1024, 768, 'crt')
log.info('forcing device reboot')
if not powermanagement.soft_reboot_and_verify(device=deviceName, dm=dm, ipAddr=proxyIP, port=proxyPort):
return None, None
width, height = getResolution(dm)
if width != 1024 and height != 768:
setFlag(errorFile, "Remote Device Error: Resolution change failed. Should be %d/%d but is %d/%d" % (1024, 768, width, height))
return None, None
except devicemanager.AgentError, err:
log.error("remoteDeviceError: while doing one time setup for installation: %s" % err)
return None, None
dm.uninstallApp(package_basename)
reboot_needed = True
else:
dm.uninstallAppAndReboot(package_basename)
waitForDevice(dm)
except devicemanager.DMError, err:
setFlag(
errorFile,
"Remote Device Error: Unable to uninstall %s and reboot: %s"
% (package_basename, err))
return RETCODE_ERROR
finally:
break # Don't try this proc again, since we already matched
if reboot_needed:
if not powermanagement.soft_reboot_and_verify(device, dm):
# NOTE: powermanagement.soft_reboot_and_verify will setFlag if needed
return RETCODE_ERROR
# Now Verify that they are all gone
packages = dm._runCmds([{'cmd': 'exec pm list packages'}])
for package in packages.split('\n'):
for proc in processNames:
if package == "package:%s" % proc:
setFlag(
errorFile,
"Remote Device Error: Unable to properly uninstall %s" %
proc)
return RETCODE_ERROR
devRoot = checkDeviceRoot(dm)
