def test_Monitor(self, elements=[ "_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", "_test_2d_1_1", '_test_2d_1_2', "_test_mt_1_3/position" ]): mg_name = str(uuid.uuid1()) argin = [mg_name] + elements self.pool.CreateMeasurementGroup(argin) try: mg = Device(mg_name) with self.assertRaises(Exception): mg.setMonitor("_test_mt_1_3/position") mg.setMonitor('_test_2d_1_2') mg.setMonitor("_test_ct_1_3") expected = [ "_test_ct_1_3", "_test_ct_1_3", "_test_ct_1_3", "_test_2d_1_2", '_test_2d_1_2', None ] result = mg.getMonitor() self._assertMultipleResults(result, elements, expected) expected = ["_test_ct_1_3", '_test_2d_1_2', None] result = mg.getMonitor(ret_by_ctrl=True) ctrls = ['_test_ct_ctrl_1', '_test_2d_ctrl_1', '__tango__'] self._assertMultipleResults(result, ctrls, expected) # Check ret_full_name v = TangoDeviceNameValidator() counters = [ "_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", '_test_2d_1_1', '_test_2d_1_2' ] full_names = [v.getNames(counter)[0] for counter in counters] mg.setMonitor(v.getNames('_test_ct_1_1')[0]) mg.setMonitor(v.getNames('_test_2d_1_2')[0]) result = mg.getMonitor(*counters, ret_full_name=True) expected = [ "_test_ct_1_1", "_test_ct_1_1", "_test_ct_1_1", "_test_2d_1_2", '_test_2d_1_2' ] self._assertMultipleResults(result, full_names, expected) finally: mg.cleanUp() self.pool.DeleteElement(mg_name)
def test_ValueRefEnabled(self, elements=["_test_2d_1_1", "_test_2d_1_2", "_test_ct_1_3", "_test_mt_1_3/position"]): mg_name = str(uuid.uuid1()) argin = [mg_name] + elements self.pool.CreateMeasurementGroup(argin) try: mg = Device(mg_name) # Check initial state of all kind of channels, nonexistent # channels for the feature return None as result. enabled = mg.getValueRefEnabled(*elements) expected = [False, False, None, None] self._assertMultipleResults(enabled, elements, expected) # Check if the nonexistent channels raise error if trying to set with self.assertRaises(Exception): mg.setValueRefEnabled(True, *elements[-2]) with self.assertRaises(Exception): mg.setValueRefEnabled(True, *elements[-1]) # Redefine elements to ony use existing values elements = ["_test_2d_1_1", "_test_2d_1_2"] # Test every possible combination of setting values # Check that changing one channel doesn't affect the other mg.setValueRefEnabled(True, *elements) enabled = mg.getValueRefEnabled(*elements) self._assertResult(enabled, elements, True) mg.setValueRefEnabled(False, elements[0]) result = mg.getValueRefEnabled(*elements) expected = [True] * len(elements) expected[0] = False self._assertMultipleResults(result, elements, expected) mg.setValueRefEnabled(True, *elements) enabled = mg.getValueRefEnabled(*elements) self._assertResult(enabled, elements, True) # Set values using the controller instead of channels mg.setValueRefEnabled(True, "_test_2d_ctrl_1") enabled = mg.getValueRefEnabled(*elements) self._assertResult(enabled, elements, True) # Get values by controller mg.setValueRefEnabled(False, *elements) enabled = mg.getValueRefEnabled("_test_2d_ctrl_1") self._assertResult(enabled, elements, False) # Check ret_full_name v = TangoDeviceNameValidator() full_names = [v.getNames(element)[0] for element in elements] enabled = mg.getValueRefEnabled(*full_names) self._assertResult(enabled, elements, False) mg.setValueRefEnabled(True, *full_names) enabled = mg.getValueRefEnabled(*elements, ret_full_name=True) self._assertResult(enabled, full_names, True) finally: mg.cleanUp() if os.name != "nt": self.pool.DeleteElement(mg_name)
def test_Timer(self, elements=[ "_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", "_test_mt_1_3/position" ]): mg_name = str(uuid.uuid1()) argin = [mg_name] + elements self.pool.CreateMeasurementGroup(argin) try: mg = Device(mg_name) result = mg.getTimer("_test_mt_1_3/position") with self.assertRaises(Exception): mg.setTimer("_test_mt_1_3/position") self._assertResult(result, ["_test_mt_1_3/position"], None) mg.setTimer('_test_ct_1_3') result = mg.getTimer(*elements) expected = ['_test_ct_1_3', '_test_ct_1_3', '_test_ct_1_3', None] self._assertMultipleResults(result, elements, expected) mg.setTimer('_test_ct_1_2') result = mg.getTimer(*elements) expected = ['_test_ct_1_2', '_test_ct_1_2', '_test_ct_1_2', None] self._assertMultipleResults(result, elements, expected) result = mg.getTimer(*elements, ret_by_ctrl=True) self._assertMultipleResults(result, ['_test_ct_ctrl_1', '__tango__'], ['_test_ct_1_2', None]) # Check ret_full_name v = TangoDeviceNameValidator() counters = ["_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3"] full_names = [v.getNames(counter)[0] for counter in counters] mg.setTimer(v.getNames('_test_ct_1_1')[0]) result = mg.getTimer() expected = ['_test_ct_1_1', '_test_ct_1_1', '_test_ct_1_1', None] self._assertMultipleResults(result, elements, expected) # TODO ret_full_name gives controler name mg.setTimer("_test_ct_1_2") result = mg.getTimer(*counters, ret_full_name=True) self._assertResult(result, full_names, "_test_ct_1_2") finally: mg.cleanUp() self.pool.DeleteElement(mg_name)
def test_ValueRefPattern(self, elements=[ "_test_2d_1_1", "_test_2d_1_2", "_test_ct_1_3", "_test_mt_1_3/position" ]): mg_name = str(uuid.uuid1()) argin = [mg_name] + elements self.pool.CreateMeasurementGroup(argin) try: mg = Device(mg_name) # Check initial state of all kind of channels, nonexistent # channels for the feature return None as result. pattern = mg.getValueRefPattern(*elements) expected = ['', '', None, None] self._assertMultipleResults(pattern, elements, expected) # Check if the nonexistent channels raise error if trying to set with self.assertRaises(Exception): mg.setValueRefPattern('/tmp/test_foo.txt', *elements[-2]) with self.assertRaises(Exception): mg.setValueRefPattern('/tmp/test_foo.txt', *elements[-1]) # Redefine elements to ony use existing values elements = ["_test_2d_1_1", "_test_2d_1_2"] # Test every possible combination of setting values # Check that changing one channel doesn't affect the other mg.setValueRefPattern('/tmp/test_foo.txt', *elements) pattern = mg.getValueRefPattern(*elements) self._assertResult(pattern, elements, '/tmp/test_foo.txt') # Set values using the controller instead of channels mg.setValueRefPattern('/tmp/test_foo2.txt', "_test_2d_ctrl_1") pattern = mg.getValueRefPattern(*elements) self._assertResult(pattern, elements, '/tmp/test_foo2.txt') # Get values by controller mg.setValueRefPattern('/tmp/test_foo.txt', *elements) pattern = mg.getValueRefPattern("_test_2d_ctrl_1") self._assertResult(pattern, elements, '/tmp/test_foo.txt') # Check ret_full_name v = TangoDeviceNameValidator() full_names = [v.getNames(element)[0] for element in elements] pattern = mg.getValueRefPattern(*full_names) self._assertResult(pattern, elements, '/tmp/test_foo.txt') mg.setValueRefPattern('/tmp/test_foo2.txt', *full_names) pattern = mg.getValueRefPattern(*elements, ret_full_name=True) self._assertResult(pattern, full_names, '/tmp/test_foo2.txt') finally: mg.cleanUp() self.pool.DeleteElement(mg_name)
def test_Synchronizer(self, elements=[ "_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", "_test_2d_1_1", "_test_mt_1_3/position" ]): mg_name = str(uuid.uuid1()) argin = [mg_name] + elements self.pool.CreateMeasurementGroup(argin) try: mg = Device(mg_name) result = mg.getSynchronizer() expected = ['software', 'software', 'software', 'software', None] self._assertMultipleResults(result, elements, expected) with self.assertRaises(Exception): mg.setSynchronizer('_test_tg_1_2', "_test_mt_1_3/position") mg.setSynchronizer('_test_tg_1_2', "_test_ct_ctrl_1", "_test_2d_ctrl_1") expected = [ '_test_tg_1_2', '_test_tg_1_2', '_test_tg_1_2', '_test_tg_1_2', None ] result = mg.getSynchronizer() self._assertMultipleResults(result, elements, expected) mg.setSynchronizer('software', "_test_ct_ctrl_1", "_test_2d_ctrl_1") result = mg.getSynchronizer() expected = ['software', 'software', 'software', 'software', None] self._assertMultipleResults(result, elements, expected) with self.assertRaises(Exception): mg.setSynchronizer('asdf', "_test_ct_ctrl_1", "_test_2d_ctrl_1") # Check ret_full_name v = TangoDeviceNameValidator() counters = [ "_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", '_test_2d_1_1' ] full_names = [v.getNames(counter)[0] for counter in counters] mg.setSynchronizer('_test_tg_1_2', "_test_ct_ctrl_1", "_test_2d_ctrl_1") result = mg.getSynchronizer(*counters, ret_full_name=True) self._assertResult(result, full_names, '_test_tg_1_2') finally: mg.cleanUp() self.pool.DeleteElement(mg_name)
def test_Synchronization(self, elements=["_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", "_test_2d_1_1", "_test_mt_1_3/position"]): mg_name = str(uuid.uuid1()) argin = [mg_name] + elements self.pool.CreateMeasurementGroup(argin) try: mg = Device(mg_name) result = mg.getSynchronization() expected = [AcqSynchType.Trigger, AcqSynchType.Trigger, AcqSynchType.Trigger, AcqSynchType.Trigger, None] self._assertMultipleResults(result, elements, expected) # TODO: maybe we should raise an exception here? # with self.assertRaises(Exception): # mg.setSynchronization(AcqSynchType.Trigger, # "_test_mt_1_3/position") mg.setSynchronization(AcqSynchType.Gate, "_test_ct_ctrl_1", "_test_2d_ctrl_1") expected = [AcqSynchType.Gate, AcqSynchType.Gate, AcqSynchType.Gate, AcqSynchType.Gate, None] result = mg.getSynchronization() self._assertMultipleResults(result, elements, expected) mg.setSynchronization(AcqSynchType.Start, "_test_ct_ctrl_1", "_test_2d_ctrl_1") result = mg.getSynchronization() expected = [AcqSynchType.Start, AcqSynchType.Start, AcqSynchType.Start, AcqSynchType.Start, None] self._assertMultipleResults(result, elements, expected) with self.assertRaises(Exception): mg.setSynchronization('asdf', "_test_ct_ctrl_1", "_test_2d_ctrl_1") # Check ret_full_name v = TangoDeviceNameValidator() counters = ["_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", '_test_2d_1_1'] full_names = [v.getNames(counter)[0] for counter in counters] mg.setSynchronization(AcqSynchType.Trigger, "_test_ct_ctrl_1", "_test_2d_ctrl_1") result = mg.getSynchronization(*counters, ret_full_name=True) self._assertResult(result, full_names, AcqSynchType.Trigger) finally: mg.cleanUp() if os.name != "nt": self.pool.DeleteElement(mg_name)
def test_PlotType(self, elements=[ "_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", "_test_2d_1_3", "_test_mt_1_3/position" ]): mg_name = str(uuid.uuid1()) argin = [mg_name] + elements self.pool.CreateMeasurementGroup(argin) try: mg = Device(mg_name) plottype = mg.getPlotType() self._assertResult(plottype, elements, 0) mg.setPlotType("Image", elements[0]) mg.setPlotType("Spectrum", elements[1]) mg.setPlotType("No", elements[2]) mg.setPlotType("Image", elements[3]) mg.setPlotType("Image", elements[4]) plottype = mg.getPlotType() expected_values = [2, 1, 0, 2, 2] self._assertMultipleResults(plottype, elements, expected_values) with self.assertRaises(ValueError): mg.setPlotType("asdf", elements[2]) # Redefine elements elements = ["_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3"] # Set values using the controller instead of channels mg.setPlotType("Image", "_test_ct_ctrl_1") plottype = mg.getPlotType(*elements) self._assertResult(plottype, elements, 2) # Get values by controller mg.setPlotType("Spectrum", *elements) plottype = mg.getPlotType("_test_ct_ctrl_1") self._assertResult(plottype, elements, 1) # Check ret_full_name v = TangoDeviceNameValidator() full_names = [v.getNames(element)[0] for element in elements] plottype = mg.getPlotType(*full_names) self._assertResult(plottype, elements, 1) mg.setPlotType("Image", *full_names) plottype = mg.getPlotType(*elements, ret_full_name=True) self._assertResult(plottype, full_names, 2) finally: mg.cleanUp() self.pool.DeleteElement(mg_name)
def test_PlotAxes(self, elements=[ "_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3", "_test_2d_1_3", "_test_mt_1_3/position" ]): mg_name = str(uuid.uuid1()) argin = [mg_name] + elements self.pool.CreateMeasurementGroup(argin) try: mg = Device(mg_name) mg.setPlotType("Image", elements[0]) mg.setPlotType("Spectrum", elements[1]) mg.setPlotType("No", elements[2]) mg.setPlotType("Image", elements[3]) mg.setPlotType("Image", elements[4]) result = mg.getPlotAxes() self._assertResult(result, elements, []) mg.setPlotAxes(["<idx>", "<idx>"], elements[0]) mg.setPlotAxes(["<mov>"], elements[1]) with self.assertRaises(Exception): mg.setPlotAxes(['<mov>'], elements[2]) mg.setPlotAxes(["<idx>", "<idx>"], elements[3]) mg.setPlotAxes(["<idx>", "<idx>"], elements[4]) result = mg.getPlotAxes() expected_result = [['<idx>', '<idx>'], ['<mov>'], [], ['<idx>', '<idx>'], ['<idx>', '<idx>']] self._assertMultipleResults(result, elements, expected_result) mg.setPlotAxes(["<mov>", "<idx>"], elements[0]) mg.setPlotAxes(["<idx>"], elements[1]) result = mg.getPlotAxes() expected_result = [['<mov>', '<idx>'], ['<idx>'], [], ['<idx>', '<idx>'], ['<idx>', '<idx>']] self._assertMultipleResults(result, elements, expected_result) mg.setPlotAxes(["<mov>", "<mov>"], elements[0]) result = mg.getPlotAxes() expected_result = [['<mov>', '<mov>'], ['<idx>'], [], ['<idx>', '<idx>'], ['<idx>', '<idx>']] self._assertMultipleResults(result, elements, expected_result) with self.assertRaises(RuntimeError): mg.setPlotAxes(["<mov>"], elements[2]) with self.assertRaises(ValueError): mg.setPlotAxes(["<mov>", "<idx>"], elements[1]) with self.assertRaises(ValueError): mg.setPlotAxes(["<mov>"], elements[0]) elements = ["_test_ct_1_1", "_test_ct_1_2", "_test_ct_1_3"] # Set values using the controller instead of channels with self.assertRaises(Exception): mg.setPlotAxes(["<mov>"], "_test_ct_ctrl_1") # TODO get method by controller doesn't give the order # Get values by controller result = mg.getPlotAxes("_test_ct_ctrl_1") expected_result = [['<mov>', '<mov>'], ['<idx>'], []] self._assertMultipleResults(result, elements, expected_result) # Check ret_full_name v = TangoDeviceNameValidator() full_names = [v.getNames(element)[0] for element in elements] result = mg.getPlotAxes(*full_names) expected_result = [['<mov>', '<mov>'], ['<idx>'], []] self._assertMultipleResults(result, elements, expected_result) mg.setPlotAxes(["<idx>", "<idx>"], full_names[0]) mg.setPlotAxes(["<mov>"], full_names[1]) result = mg.getPlotAxes(*elements, ret_full_name=True) expected_result = [['<idx>', '<idx>'], ['<mov>'], []] self._assertMultipleResults(result, full_names, expected_result) finally: mg.cleanUp() self.pool.DeleteElement(mg_name)