def main():
agent = None
numberOfReconnect = 1
numberOfInit = 1
numberOfEnable = 1
isTestSuccessFull = True
scan_filter = dict()
bleAdapter.init()
agent = securityAgent.createSecurityAgent(agent=agent)
scan_filter.update({"UUIDs": [runTest.DUT_UUID]})
for i in range(numberOfInit * numberOfEnable):
bleAdapter.setDiscoveryFilter(scan_filter)
for j in range(numberOfReconnect):
if i == 0 and j == 0:
bleAdapter.startDiscovery(discoveryEventCb)
else:
bleAdapter.startDiscovery(discoveryStartedCb)
mainloop.run()
bleAdapter.stopDiscovery()
testDevice = runTest.getTestDevice()
isConnectSuccessFull = bleAdapter.connect(testDevice)
isTestSuccessFull &= isConnectSuccessFull
runTest.stopAdvertisement(scan_filter)
isTestSuccessFull &= bleAdapter.disconnect()
if numberOfReconnect:
runTest.submitTestResult(isTestSuccessFull, runTest.reConnection)
# runTest.setTestDevice([]);
time.sleep(2)
runTest.printTestsSummary()
agent = teardown_test(agent)
def main():
scan_filter = dict()
bleAdapter.init()
agent = securityAgent.createSecurityAgent()
scan_filter.update({"UUIDs": [runTest.DUT_UUID_128]})
bleAdapter.setDiscoveryFilter(scan_filter)
# Discovery test
bleAdapter.startDiscovery(runTest.discoveryEventCb)
runTest.mainloop.run()
isTestSuccessFull = True
runTest.submitTestResult(isTestSuccessFull, runTest.advertisement)
bleAdapter.stopDiscovery()
# Simple Connection test
testDevice = runTest.getTestDevice()
isTestSuccessFull = bleAdapter.connect(testDevice)
runTest.submitTestResult(isTestSuccessFull, runTest.simpleConnection)
time.sleep(2) # wait for connection parameters update
# Discover all primary services
isTestSuccessFull = runTest.discoverPrimaryServices()
runTest.submitTestResult(isTestSuccessFull,
runTest.discoverPrimaryServices)
bleAdapter.gatt.updateLocalAttributeTable()
# Check device not present. After discovery of services, advertisement
# should have stopped.
runTest.stopAdvertisement(scan_filter)
# Change MTU size
# bleAdapter.readLocalMTU()
# Check attribute table UUIDs
bleAdapter.gatt.updateLocalAttributeTable()
isTestSuccessFull = runTest.checkUUIDs(bleAdapter.gatt)
runTest.submitTestResult(isTestSuccessFull, runTest.checkUUIDs)
# Check attribute table properties
isTestSuccessFull = runTest.checkProperties(bleAdapter.gatt)
runTest.submitTestResult(isTestSuccessFull, runTest.checkProperties)
# CHeck long write
isTestSuccessFull = runTest.writeLongCharacteristic()
runTest.submitTestResult(isTestSuccessFull,
runTest.writeLongCharacteristic)
# Check read/write, simple connection
isTestSuccessFull = runTest.readWriteSimpleConnection()
runTest.submitTestResult(isTestSuccessFull,
runTest.readWriteSimpleConnection)
# check write without response
isTestSuccessFull = runTest.writeWithoutResponse()
runTest.submitTestResult(isTestSuccessFull, runTest.writeWithoutResponse)
# Enable and receive notification and indication then disable.
bleAdapter.setNotificationCallBack(runTest.notificationCb)
bleAdapter.subscribeForNotification(
runTest.DUT_NOTIFY_CHAR_UUID) # subscribe for next test
bleAdapter.subscribeForNotification(
runTest.DUT_INDICATE_CHAR_UUID) # subscribe for next test
isTestSuccessFull = True
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.notification)
bleAdapter.setNotificationCallBack(runTest.indicationCb)
isTestSuccessFull = True
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.indication)
isTestSuccessFull = bleAdapter.subscribeForNotification(
runTest.DUT_NOTIFY_CHAR_UUID, subscribe=False) # unsubscribe
isTestSuccessFull = True
runTest.submitTestResult(isTestSuccessFull, runTest.removeNotification)
isTestSuccessFull = bleAdapter.subscribeForNotification(
runTest.DUT_INDICATE_CHAR_UUID, subscribe=False) # unsubscribe
isTestSuccessFull = True
runTest.submitTestResult(isTestSuccessFull, runTest.removeIndication)
# Check writing to protected characteristic triggers pairing
isTestSuccessFull = runTest.pairing()
runTest.submitTestResult(isTestSuccessFull, runTest.pairing)
bleAdapter.bondToRemoteDevice()
# Check writing to protected characteristic after successfull pairing
# succeed
time.sleep(2) # wait before starting next test
isTestSuccessFull = runTest.readWriteProtectedAttributesWhilePaired()
runTest.submitTestResult(isTestSuccessFull,
runTest.readWriteProtectedAttributesWhilePaired)
# disconnect, Note it is not a test happening on bluez, the DUT is waiting
# for a disconnect Cb
runTest.disconnect()
# reconnect! Since devices bonded, it should not ask for pairing again.
# Security agent can be destroyed
# remove security agent so as not to trigger auto pairing.
securityAgent.removeSecurityAgent()
bleAdapter.setDiscoveryFilter(scan_filter)
# wait for DUT to start advertising
bleAdapter.startDiscovery(runTest.discoveryStartedCb)
runTest.mainloop.run()
bleAdapter.stopDiscovery()
runTest.reconnectWhileBonded()
# reconnect while not bonded. Pairing should fail since Just works is not
# accepted
bleAdapter.disconnect()
bleAdapter.removeBondedDevices()
time.sleep(2) # wait for bonded devices to be deleted
bleAdapter.setDiscoveryFilter(scan_filter)
bleAdapter.startDiscovery(runTest.discoveryEventCb)
runTest.mainloop.run()
bleAdapter.stopDiscovery()
agent = securityAgent.createSecurityAgent("NoInputNoOutput", agent)
runTest.reconnectWhileNotBonded()
time.sleep(2)
runTest.printTestsSummary()
def main():
scan_filter = dict()
bleAdapter.init()
agent = securityAgent.createSecurityAgent()
# default DUT_name: nimble(without set_property)
# TODO: check DUT with MAC address instead of name.
scan_filter.update({"UUIDs": [runTest.DUT_UUID_128]})
# default DUT_name: nimble(without set_property)
# TODO: check DUT with MAC address instead of name.
DUT_ORIGINAL_NAME = runTest.DUT_NAME
runTest.DUT_NAME = "nimb"
bleAdapter.setDiscoveryFilter(scan_filter)
# Advertisement interval consistent after reset test
# The first time uses different callback to get/check test device information. Use the second time and third time KPI to compare.
# First time connection
isTestSuccessFull = True
bleAdapter.startDiscovery(runTest.discoveryEventCb)
# firstStartScan = time.time()
runTest.mainloop.run()
# firstKPI = time.time() - firstStartScan
runTest.submitTestResult(isTestSuccessFull, runTest.advertisement)
bleAdapter.stopDiscovery()
testDevice = runTest.getTestDevice()
isTestSuccessFull = bleAdapter.connect(testDevice)
runTest.submitTestResult(isTestSuccessFull, runTest.simpleConnection)
time.sleep(2) #wait for connection parameters update
isTestSuccessFull &= bleAdapter.disconnect()
# Second time connection
bleAdapter.startDiscovery(
runTest.discoveryStartedCb) #wait for DUT to start advertising
secondStartScan = time.time()
runTest.mainloop.run()
secondKPI = time.time() - secondStartScan
bleAdapter.stopDiscovery()
isConnectSuccessFull = bleAdapter.connect(testDevice)
isTestSuccessFull &= isConnectSuccessFull
runTest.submitTestResult(isTestSuccessFull, runTest.reConnection)
time.sleep(2) #wait for connection parameters update
# Second time disconnect
isTestSuccessFull &= bleAdapter.disconnect()
#Third time connection
bleAdapter.startDiscovery(
runTest.discoveryStartedCb) #wait for DUT to start advertising
thirdStartScan = time.time()
runTest.mainloop.run()
thirdKPI = time.time() - thirdStartScan
bleAdapter.stopDiscovery()
isConnectSuccessFull = bleAdapter.connect(testDevice)
isTestSuccessFull &= isConnectSuccessFull
runTest.submitTestResult(isTestSuccessFull, runTest.reConnection)
if thirdKPI > secondKPI * 10:
isTestSuccessFull &= false
# write result back to server
isTestSuccessFull = runTest.discoverPrimaryServices()
bleAdapter.gatt.updateLocalAttributeTable()
isTestSuccessFull &= runTest.writeResultWithoutResponse(
chr(isTestSuccessFull + 48))
runTest.submitTestResult(isTestSuccessFull, runTest.writeWithoutResponse)
# Data size > MTU - 3 send notification test
bleAdapter.setNotificationCallBack(runTest.notificationMTUCb)
bleAdapter.subscribeForNotification(
runTest.DUT_NOTIFY_CHAR_UUID) #subscribe for next test
isTestSuccessFull = True
runTest.mainloop.run()
isTestSuccessFull = runTest.isNotificationDeclinedSuccessFull
runTest.submitTestResult(isTestSuccessFull, runTest.notification)
isTestSuccessFull = bleAdapter.subscribeForNotification(
runTest.DUT_NOTIFY_CHAR_UUID, subscribe=False) #unsubscribe
runTest.submitTestResult(isTestSuccessFull, runTest.removeNotification)
isTestSuccessFull &= bleAdapter.disconnect()
testutils.removeBondedDevices()
runTest.DUT_NAME = DUT_ORIGINAL_NAME
isTestSuccessFull = runTest.Advertise_With_16bit_ServiceUUID(
scan_filter=scan_filter, bleAdapter=bleAdapter)
runTest.submitTestResult(isTestSuccessFull,
runTest.Advertise_With_16bit_ServiceUUID)
scan_filter.update({"UUIDs": [runTest.DUT_UUID_128]})
# default DUT_name: nimble(without set_property)
bleAdapter.setDiscoveryFilter(scan_filter)
# First time connection
isTestSuccessFull = True
bleAdapter.startDiscovery(runTest.discoveryEventCb)
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.advertisement)
bleAdapter.stopDiscovery()
testDevice = runTest.getTestDevice()
isTestSuccessFull = bleAdapter.connect(testDevice)
runTest.submitTestResult(isTestSuccessFull, runTest.simpleConnection)
isTestSuccessFull = runTest.discoverPrimaryServices()
runTest.submitTestResult(isTestSuccessFull,
runTest.discoverPrimaryServices)
bleAdapter.gatt.updateLocalAttributeTable()
# Check device not present. After discovery of services, advertisement should have stopped.
runTest.stopAdvertisement(scan_filter)
# Check write and read
bleAdapter.writeCharacteristic(runTest.DUT_OPEN_CHAR_UUID,
runTest.DUT_OPEN_DESCR_UUID)
bleAdapter.readCharacteristic(runTest.DUT_OPEN_CHAR_UUID)
# Enable and receive notification and indication then disable.
bleAdapter.subscribeForNotification(runTest.DUT_NOTIFY_CHAR_UUID)
bleAdapter.subscribeForNotification(
runTest.DUT_INDICATE_CHAR_UUID) #subscribe for next test
time.sleep(2) #wait for connection parameters update
# Check Notification and Indication
bleAdapter.setNotificationCallBack(runTest.notificationCb)
isTestSuccessFull = True
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.notification)
bleAdapter.setNotificationCallBack(runTest.indicationCb)
isTestSuccessFull = True
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.indication)
isTestSuccessFull &= bleAdapter.disconnect()
# Second time connection
bleAdapter.startDiscovery(
runTest.discoveryStartedCb) #wait for DUT to start advertising
runTest.mainloop.run()
bleAdapter.stopDiscovery()
isConnectSuccessFull = bleAdapter.connect(testDevice)
isTestSuccessFull &= isConnectSuccessFull
runTest.submitTestResult(isTestSuccessFull, runTest.reConnection)
bleAdapter.subscribeForNotification(runTest.DUT_NOTIFY_CHAR_UUID)
bleAdapter.subscribeForNotification(
runTest.DUT_INDICATE_CHAR_UUID) #subscribe for next test
# Check write and read after reconnection
bleAdapter.writeCharacteristic(runTest.DUT_OPEN_CHAR_UUID,
runTest.DUT_OPEN_DESCR_UUID)
bleAdapter.readCharacteristic(runTest.DUT_OPEN_CHAR_UUID)
# Check Notification and Indication after reconnection
bleAdapter.setNotificationCallBack(runTest.notificationCb)
isTestSuccessFull = True
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.notification)
bleAdapter.setNotificationCallBack(runTest.indicationCb)
isTestSuccessFull = True
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.indication)
isTestSuccessFull = bleAdapter.subscribeForNotification(
runTest.DUT_NOTIFY_CHAR_UUID, subscribe=False) #unsubscribe
isTestSuccessFull = True
runTest.submitTestResult(isTestSuccessFull, runTest.removeNotification)
isTestSuccessFull = bleAdapter.subscribeForNotification(
runTest.DUT_INDICATE_CHAR_UUID, subscribe=False) #unsubscribe
isTestSuccessFull = True
runTest.submitTestResult(isTestSuccessFull, runTest.removeIndication)
isTestSuccessFull &= bleAdapter.disconnect()
testutils.removeBondedDevices()
time.sleep(2) #wait for connection parameters update
runTest.submitTestResult(isTestSuccessFull, runTest.disconnect)
runTest.printTestsSummary()
def main():
agent = None
STRESS_TIER = 1
if (STRESS_TIER == 0):
STRESS_TEST_INIT_REPETITION = 1
STRESS_TEST_ENABLE_REPETITION = 1
STRESS_TEST_MODULE_REPETITION = 1
elif (STRESS_TIER == 1):
STRESS_TEST_INIT_REPETITION = 1
STRESS_TEST_ENABLE_REPETITION = 1
STRESS_TEST_MODULE_REPETITION = 10
elif (STRESS_TIER == 2):
STRESS_TEST_INIT_REPETITION = 2
STRESS_TEST_ENABLE_REPETITION = 10
STRESS_TEST_MODULE_REPETITION = 100
elif (STRESS_TIER == 3):
STRESS_TEST_INIT_REPETITION = 3
STRESS_TEST_ENABLE_REPETITION = 100
STRESS_TEST_MODULE_REPETITION = 1000
isTestSuccessFull = True
scan_filter = dict()
bleAdapter.init()
agent = securityAgent.createSecurityAgent(agent=agent)
scan_filter.update({"UUIDs": [runTest.DUT_UUID_128]})
for i in range(STRESS_TEST_INIT_REPETITION *
STRESS_TEST_ENABLE_REPETITION):
bleAdapter.setDiscoveryFilter(scan_filter)
for j in range(STRESS_TEST_MODULE_REPETITION):
if i == 0 and j == 0:
bleAdapter.startDiscovery(runTest.discoveryEventCb)
else:
bleAdapter.startDiscovery(runTest.discoveryStartedCb)
runTest.mainloop.run()
bleAdapter.stopDiscovery()
testDevice = runTest.getTestDevice()
isConnectSuccessFull = bleAdapter.connect(testDevice)
isTestSuccessFull &= isConnectSuccessFull
runTest.stopAdvertisement(scan_filter)
isTestSuccessFull &= bleAdapter.disconnect()
bleAdapter.startDiscovery(runTest.discoveryStartedCb)
runTest.mainloop.run()
bleAdapter.stopDiscovery()
runTest._simple_connect()
runTest.stopAdvertisement(scan_filter)
# Discover all primary services
isTestSuccessFull = runTest.discoverPrimaryServices()
runTest.submitTestResult(isTestSuccessFull,
runTest.discoverPrimaryServices)
bleAdapter.gatt.updateLocalAttributeTable()
isTestSuccessFull &= runTest.checkUUIDs(bleAdapter.gatt)
# Check attribute table properties
isTestSuccessFull &= runTest.checkProperties(bleAdapter.gatt)
# Check read/write, simple connection
for i in range(STRESS_TEST_MODULE_REPETITION):
isTestSuccessFull &= runTest.readWriteSimpleConnection()
runTest.submitTestResult(isTestSuccessFull,
runTest.readWriteSimpleConnection)
time.sleep(2)
bleAdapter.subscribeForNotification(
runTest.DUT_NOTIFY_CHAR_UUID) # subscribe for next test
bleAdapter.subscribeForNotification(
runTest.DUT_INDICATE_CHAR_UUID) # subscribe for next test
# Check read/write, simple connection
for i in range(STRESS_TEST_MODULE_REPETITION):
# Enable and receive notification and indication then disable.
bleAdapter.setNotificationCallBack(runTest.notificationCb)
isTestSuccessFull = True
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.notification)
bleAdapter.setNotificationCallBack(runTest.indicationCb)
isTestSuccessFull = True
runTest.mainloop.run()
runTest.submitTestResult(isTestSuccessFull, runTest.indication)
time.sleep(5)
isTestSuccessFull = bleAdapter.subscribeForNotification(
runTest.DUT_NOTIFY_CHAR_UUID, subscribe=False) # unsubscribe
isTestSuccessFull = True
runTest.submitTestResult(isTestSuccessFull, runTest.removeNotification)
isTestSuccessFull = bleAdapter.subscribeForNotification(
runTest.DUT_INDICATE_CHAR_UUID, subscribe=False) # unsubscribe
isTestSuccessFull = True
runTest.submitTestResult(isTestSuccessFull, runTest.removeIndication)
if STRESS_TEST_MODULE_REPETITION:
runTest.submitTestResult(isTestSuccessFull, runTest.reConnection)
time.sleep(2)
runTest.printTestsSummary()
