Beispiel #1
0
def test_autogo_scan(dev):
    """P2P autonomous GO and no P2P IE in Probe Response scan results"""
    addr0 = dev[0].p2p_dev_addr()
    addr1 = dev[1].p2p_dev_addr()
    dev[0].p2p_start_go(freq=2412, persistent=True)
    bssid = dev[0].p2p_interface_addr()

    dev[1].discover_peer(addr0)
    dev[1].p2p_stop_find()
    ev = dev[1].wait_global_event(["P2P-FIND-STOPPED"], timeout=2)
    time.sleep(0.1)
    dev[1].flush_scan_cache()

    pin = dev[1].wps_read_pin()
    dev[0].group_request("WPS_PIN any " + pin)

    try:
        dev[1].request("SET p2p_disabled 1")
        dev[1].request("SCAN freq=2412")
        ev = dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
        if ev is None:
            raise Exception("Active scan did not complete")
    finally:
        dev[1].request("SET p2p_disabled 0")

    for i in range(2):
        dev[1].request("SCAN freq=2412 passive=1")
        ev = dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
        if ev is None:
            raise Exception("Scan did not complete")

    # Disable management frame processing for a moment to skip Probe Response
    # frame with P2P IE.
    dev[0].group_request("SET ext_mgmt_frame_handling 1")

    dev[1].global_request("P2P_CONNECT " + bssid + " " + pin +
                          " freq=2412 join")

    # Skip the first Probe Request frame
    ev = dev[0].wait_group_event(["MGMT-RX"], timeout=10)
    if ev is None:
        raise Exception("No Probe Request frame seen")
    if not ev.split(' ')[4].startswith("40"):
        raise Exception("Not a Probe Request frame")

    # If a P2P Device is not used, the PD Request will be received on the group
    # interface (which is actually wlan0, since a separate interface is not
    # used), which was set to external management frame handling, so need to
    # reply to it manually.
    res = dev[0].get_driver_status()
    if not (int(res['capa.flags'], 0) & 0x20000000):
        # Reply to PD Request while still filtering Probe Request frames
        msg = rx_pd_req(dev[0])
        mgmt_tx(
            dev[0],
            "MGMT_TX {} {} freq={} wait_time=10 no_cck=1 action={}".format(
                addr1, addr0, 2412,
                "0409506f9a0908%02xdd0a0050f204100800020008" %
                msg['dialog_token']))

    # Skip Probe Request frames until something else is received
    for i in range(10):
        ev = dev[0].wait_group_event(["MGMT-RX"], timeout=10)
        if ev is None:
            raise Exception("No frame seen")
        if not ev.split(' ')[4].startswith("40"):
            break

    # Allow wpa_supplicant to process authentication and association
    dev[0].group_request("SET ext_mgmt_frame_handling 0")

    # Joining the group should succeed and indicate persistent group based on
    # Beacon frame P2P IE.
    ev = dev[1].wait_global_event(["P2P-GROUP-STARTED"], timeout=10)
    if ev is None:
        raise Exception("Failed to join group")
    if "[PERSISTENT]" not in ev:
        raise Exception("Did not recognize group as persistent")
    dev[0].remove_group()
    dev[1].wait_go_ending_session()
Beispiel #2
0
def test_autogo_scan(dev):
    """P2P autonomous GO and no P2P IE in Probe Response scan results"""
    addr0 = dev[0].p2p_dev_addr()
    addr1 = dev[1].p2p_dev_addr()
    dev[0].p2p_start_go(freq=2412, persistent=True)
    bssid = dev[0].p2p_interface_addr()

    dev[1].discover_peer(addr0)
    dev[1].p2p_stop_find()
    ev = dev[1].wait_global_event(["P2P-FIND-STOPPED"], timeout=2)
    time.sleep(0.1)
    dev[1].flush_scan_cache()

    pin = dev[1].wps_read_pin()
    dev[0].group_request("WPS_PIN any " + pin)

    try:
        dev[1].request("SET p2p_disabled 1")
        dev[1].request("SCAN freq=2412")
        ev = dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
        if ev is None:
            raise Exception("Active scan did not complete")
    finally:
        dev[1].request("SET p2p_disabled 0")

    for i in range(2):
        dev[1].request("SCAN freq=2412 passive=1")
        ev = dev[1].wait_event(["CTRL-EVENT-SCAN-RESULTS"])
        if ev is None:
            raise Exception("Scan did not complete")

    # Disable management frame processing for a moment to skip Probe Response
    # frame with P2P IE.
    dev[0].group_request("SET ext_mgmt_frame_handling 1")

    dev[1].global_request("P2P_CONNECT " + bssid + " " + pin + " freq=2412 join")

    # Skip the first Probe Request frame
    ev = dev[0].wait_group_event(["MGMT-RX"], timeout=10)
    if ev is None:
        raise Exception("No Probe Request frame seen")
    if not ev.split(' ')[4].startswith("40"):
        raise Exception("Not a Probe Request frame")

    # If a P2P Device is not used, the PD Request will be received on the group
    # interface (which is actually wlan0, since a separate interface is not
    # used), which was set to external management frame handling, so need to
    # reply to it manually.
    res = dev[0].get_driver_status()
    if not (int(res['capa.flags'], 0) & 0x20000000):
        # Reply to PD Request while still filtering Probe Request frames
        msg = rx_pd_req(dev[0])
        mgmt_tx(dev[0], "MGMT_TX {} {} freq={} wait_time=10 no_cck=1 action={}".format(addr1, addr0, 2412, "0409506f9a0908%02xdd0a0050f204100800020008" % msg['dialog_token']))

    # Skip Probe Request frames until something else is received
    for i in range(10):
        ev = dev[0].wait_group_event(["MGMT-RX"], timeout=10)
        if ev is None:
            raise Exception("No frame seen")
        if not ev.split(' ')[4].startswith("40"):
            break

    # Allow wpa_supplicant to process authentication and association
    dev[0].group_request("SET ext_mgmt_frame_handling 0")

    # Joining the group should succeed and indicate persistent group based on
    # Beacon frame P2P IE.
    ev = dev[1].wait_global_event(["P2P-GROUP-STARTED"], timeout=10)
    if ev is None:
        raise Exception("Failed to join group")
    if "[PERSISTENT]" not in ev:
        raise Exception("Did not recognize group as persistent")
    dev[0].remove_group()
    dev[1].wait_go_ending_session()
Beispiel #3
0
def test_grpform_go_neg_dup_on_restart(dev):
    """Duplicated GO Negotiation Request after GO Neg restart"""
    if dev[0].p2p_dev_addr() > dev[1].p2p_dev_addr():
        higher = dev[0]
        lower = dev[1]
    else:
        higher = dev[1]
        lower = dev[0]
    addr_low = lower.p2p_dev_addr()
    addr_high = higher.p2p_dev_addr()
    higher.p2p_listen()
    if not lower.discover_peer(addr_high):
        raise Exception("Could not discover peer")
    lower.p2p_stop_find()

    if "OK" not in lower.request("P2P_CONNECT %s pbc" % addr_high):
        raise Exception("Could not request GO Negotiation")
    ev = higher.wait_global_event(["P2P-GO-NEG-REQUEST"], timeout=10)
    if ev is None:
        raise Exception("GO Neg Req RX not reported")

    # Wait for GO Negotiation Response (Status=1) to go through
    time.sleep(0.2)

    if "FAIL" in lower.request("SET ext_mgmt_frame_handling 1"):
        raise Exception("Failed to enable external management frame handling")

    higher.p2p_stop_find()
    higher.global_request("P2P_CONNECT " + addr_low + " pbc")

    # Wait for the GO Negotiation Request frame of the restarted GO Negotiation
    rx_msg = lower.mgmt_rx()
    if rx_msg is None:
        raise Exception("MGMT-RX timeout")
    p2p = parse_p2p_public_action(rx_msg['payload'])
    if p2p is None:
        raise Exception("Not a P2P Public Action frame")
    if p2p['subtype'] != 0:
        raise Exception("Unexpected P2P Public Action subtype %d" % p2p['subtype'])

    # Send duplicate GO Negotiation Request from the prior instance of GO
    # Negotiation
    lower.p2p_stop_find()
    peer = higher.get_peer(addr_low)

    msg = p2p_hdr(addr_high, addr_low, type=P2P_GO_NEG_REQ, dialog_token=123)
    attrs = p2p_attr_capability(dev_capab=0x25, group_capab=0x08)
    attrs += p2p_attr_go_intent(go_intent=7, tie_breaker=1)
    attrs += p2p_attr_config_timeout()
    attrs += p2p_attr_listen_channel(chan=(int(peer['listen_freq']) - 2407) / 5)
    attrs += p2p_attr_intended_interface_addr(lower.p2p_dev_addr())
    attrs += p2p_attr_channel_list()
    attrs += p2p_attr_device_info(addr_low, config_methods=0x80, name="Device A")
    attrs += p2p_attr_operating_channel()
    wsc_attrs = struct.pack(">HHH", 0x1012, 2, 4)
    msg['payload'] += ie_p2p(attrs) + ie_wsc(wsc_attrs)
    mgmt_tx(lower, "MGMT_TX {} {} freq={} wait_time=200 no_cck=1 action={}".format(addr_high, addr_high, peer['listen_freq'], binascii.hexlify(msg['payload'])))

    # Wait for the GO Negotiation Response frame which would have been sent in
    # this case previously, but not anymore after the check for
    # dev->go_neg_req_sent and dev->flags & P2P_DEV_PEER_WAITING_RESPONSE.
    rx_msg = lower.mgmt_rx(timeout=0.2)
    if rx_msg is not None:
        raise Exception("Unexpected management frame")

    if "FAIL" in lower.request("SET ext_mgmt_frame_handling 0"):
        raise Exception("Failed to disable external management frame handling")
    lower.p2p_listen()

    ev = lower.wait_global_event(["P2P-GO-NEG-SUCCESS"], timeout=10)
    if ev is None:
        raise Exception("GO Negotiation did not succeed on dev0")

    ev = higher.wait_global_event(["P2P-GO-NEG-SUCCESS"], timeout=10)
    if ev is None:
        raise Exception("GO Negotiation did not succeed on dev1")

    ev0 = lower.wait_global_event(["P2P-GROUP-STARTED"], timeout=15)
    if ev0 is None:
        raise Exception("Group formation timed out on dev0")
    lower.group_form_result(ev0)

    ev1 = higher.wait_global_event(["P2P-GROUP-STARTED"], timeout=15)
    if ev1 is None:
        raise Exception("Group formation timed out on dev1")
    higher.group_form_result(ev1)

    lower.dump_monitor()
    higher.dump_monitor()

    remove_group(lower, higher)

    lower.dump_monitor()
    higher.dump_monitor()