Python setup_mesh_reader_test Beispiele

Beispiel #1

Datei: mesh.source.GTSMeshReader.cube.py Projekt: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("GTSMeshReader",
                                       "mesh.source.GTSMeshReader.cube.gts")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.GTSMeshReader.cube", 1)

Beispiel #2

#python

import testing
import k3d

factories = k3d.plugin.factory.lookup()

failing_mesh_readers = ""

for factory in factories:
    if "MeshReader" in factory.categories():
        try:
            setup = testing.setup_mesh_reader_test(
                factory.name(), "mesh.source.MeshReaders.bogus_input")
            mesh = setup.reader.output_mesh
        except:
            failing_mesh_readers += factory.name() + " "

if len(failing_mesh_readers) > 0:
    raise Exception(failing_mesh_readers + "failed to load a bogus input")

Beispiel #3

#python

import testing

setup = testing.setup_mesh_reader_test("SVGMeshReader",
                                       "mesh.source.SVGMeshReader.svg")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.SVGMeshReader", 4)

Beispiel #4

#python

import testing
import k3d

document = k3d.new_document()
setup = testing.setup_mesh_reader_test("K3DMeshReader","mesh.modifier.NurbsCurveTraversalReference.k3d")


modifier = setup.document.new_node("NurbsCurveTraversal")
modifier.create_caps = True
modifier.delete_original = False

document.set_dependency(modifier.get_property("input_mesh"), setup.reader.get_property("output_mesh"))

testing.mesh_comparison_to_reference(document, modifier.get_property("output_mesh"), "mesh.modifier.NurbsCurveTraversal2", 1)

Beispiel #5

#python

import testing
import k3d

document = k3d.new_document()
setup = testing.setup_mesh_reader_test("K3DMeshReader","mesh.modifier.NurbsCloseCurveReference.k3d")

selection = k3d.mesh_selection.deselect_all()
component_selection = k3d.mesh_selection.component(0, 1, k3d.selection.type.UNIFORM, 0, 1000, 1)
selection.add_component(component_selection)

modifier = setup.document.new_node("NurbsCloseCurve")
modifier.mesh_selection = selection
modifier.keep_ends = False

document.set_dependency(modifier.get_property("input_mesh"), setup.reader.get_property("output_mesh"))

testing.mesh_comparison_to_reference(document, modifier.get_property("output_mesh"), "mesh.modifier.NurbsCloseCurve1", 1)

Beispiel #6

#python

import testing
import k3d

document = k3d.new_document()
setup = testing.setup_mesh_reader_test(
    "K3DMeshReader", "mesh.modifier.NurbsCurveInsertKnotReference.k3d")

modifier = setup.document.new_node("NurbsCurveInsertKnot")
modifier.u_value = 0.742
modifier.multiplicity = 2
modifier.normalize_all = False

document.set_dependency(modifier.get_property("input_mesh"),
                        setup.reader.get_property("output_mesh"))

testing.mesh_comparison_to_reference(document,
                                     modifier.get_property("output_mesh"),
                                     "mesh.modifier.NurbsCurveInsertKnot", 1)

Beispiel #7

#python

import testing

setup = testing.setup_mesh_reader_test("STLMeshReader",
                                       "mesh.source.STLMeshReader.stl")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.reader.get_property("output_mesh"),
                                     "mesh.source.STLMeshReader", 1)

Beispiel #8

Datei: mesh.source.COLLADAMeshReader.py Projekt: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("COLLADAMeshReader", "mesh.source.COLLADAMeshReader.duck.dae")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.COLLADAMeshReader.duck", 1)

Beispiel #9

Datei: mesh.source.MD2MeshReader.py Projekt: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("MD2MeshReader", "mesh.source.MD2MeshReader.md2")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.MD2MeshReader", 1)

Beispiel #10

Datei: mesh.source.STLMeshReader.viscam.py Projekt: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("STLMeshReader", "mesh.source.STLMeshReader.viscam.stl")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.STLMeshReader.viscam", 1)

Beispiel #11

Datei: mesh.source.OBJMeshReader.polyhedron.py Projekt: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("OBJMeshReader", "mesh.source.OBJMeshReader.polyhedron.obj")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.OBJMeshReader.polyhedron", 1)

Beispiel #12

Datei: mesh.source.PLYMeshReader.py Projekt: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("PLYMeshReader", "mesh.source.PLYMeshReader.ply")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PLYMeshReader", 1)

Beispiel #13

Datei: mesh.source.STLMeshReader.magics.py Projekt: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("STLMeshReader", "mesh.source.STLMeshReader.magics.stl")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.STLMeshReader.magics", 1)

Beispiel #14

#python

import testing
import k3d

factories = k3d.plugin.factory.lookup()

for factory in factories:
	if "MeshReader" in factory.categories():

		print "\n\nTesting " + factory.name() + " with a file containing all zeroes ..."
		setup = testing.setup_mesh_reader_test(factory.name(), "zero_bytes")
		mesh = setup.source.output_mesh

		print "\n\nTesting " + factory.name() + " with a file containing random data ..."
		setup = testing.setup_mesh_reader_test(factory.name(), "random_bytes")
		mesh = setup.source.output_mesh

Beispiel #15

#python

import testing
import k3d

document = k3d.new_document()
setup = testing.setup_mesh_reader_test("K3DMeshReader","mesh.modifier.NurbsSkinnedSurfaceReference.k3d")

modifier = setup.document.new_node("NurbsSkinnedSurface")
modifier.along = 'y'
modifier.delete_original = True
modifier.mesh_selection = k3d.mesh_selection.select_all()

document.set_dependency(modifier.get_property("input_mesh"), setup.reader.get_property("output_mesh"))

testing.mesh_comparison_to_reference(document, modifier.get_property("output_mesh"), "mesh.modifier.NurbsSkinnedSurface", 1)

Beispiel #16

Datei: mesh.modifier.PGPRemesh.ply.torus.py Projekt: AwesomeDoesIt/k3d

#python

import k3d
import testing

setup = testing.setup_mesh_reader_test("PLYMeshReader", "mesh.modifier.PGPRemesh.torus.ply")

modifier = setup.k3d.plugin.create("PGPRemesh", document)
modifier.use_smooth = True
modifier.steps = 15
modifier.h = 1000
modifier.omega = 10
modifier.div = 4
modifier.triangulate = True
k3d.property.connect(document, setup.source.get_property(", modifier.get_property("input_mesh")output_mesh"))

#print "source output: " + repr(source.output_mesh)
#print "triangles output: " + repr(triangles.output_mesh)
#print "modifier output: " + repr(modifier.output_mesh)

testing.require_valid_mesh(setup.document, modifier.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, modifier.get_property("output_mesh"), "mesh.modifier.PGPRemesh.torus", 1)

Beispiel #17

#python

import testing

setup = testing.setup_mesh_reader_test("OBJMeshReader", "mesh.source.OBJMeshReader.polyhedron.obj")
testing.mesh_comparison_to_reference(setup.document, setup.reader.get_property("output_mesh"), "mesh.source.OBJMeshReader.polyhedron", 1)

Beispiel #18

#python

import testing
import k3d

document = k3d.new_document()
setup = testing.setup_mesh_reader_test(
    "K3DMeshReader", "mesh.modifier.NurbsExtrudePatchReference.k3d")

modifier = setup.document.new_node("NurbsPolygonizePatch")

document.set_dependency(modifier.get_property("input_mesh"),
                        setup.reader.get_property("output_mesh"))

testing.mesh_comparison_to_reference(document,
                                     modifier.get_property("output_mesh"),
                                     "mesh.modifier.NurbsPolygonizePatch", 16)

Beispiel #19

#python

import testing

setup = testing.setup_mesh_reader_test("COLLADAMeshReader", "mesh.source.COLLADAMeshReader.duck.dae")
testing.mesh_comparison_to_reference(setup.document, setup.reader.get_property("output_mesh"), "mesh.source.COLLADAMeshReader.duck", 1)

Beispiel #20

Datei: mesh.source.GTSMeshReader.gz.cube.py Projekt: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("GTSMeshReader", "mesh.source.GTSMeshReader.cube.gts.gz")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.GTSMeshReader.gz.cube", 1)

Beispiel #21

Datei: mesh.source.3DSMeshReader.py Projekt: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("3DSMeshReader", "mesh.source.3DSMeshReader.test.3ds")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.3DSMeshReader.test", 1)

Beispiel #22

#python

import testing

setup = testing.setup_mesh_reader_test("OBJMeshReader",
                                       "mesh.source.OBJMeshReader.nurbs.obj")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.reader.get_property("output_mesh"),
                                     "mesh.source.OBJMeshReader.nurbs", 1)

Beispiel #23

#python

import testing

setup = testing.setup_mesh_reader_test(
    "MD2MeshReader", "mesh.source.MD2MeshReader.dinosaur.md2")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.reader.get_property("output_mesh"),
                                     "mesh.source.MD2MeshReader.dinosaur", 1)

Beispiel #24

Datei: mesh.source.OBJMeshReader.nurbs.py Projekt: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_reader_test("OBJMeshReader", "mesh.source.OBJMeshReader.nurbs.obj")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.OBJMeshReader.nurbs", 1)

Beispiel #25

#python

import k3d
import testing

document = k3d.new_document()

setup = testing.setup_mesh_reader_test("PLYMeshReader",
                                       "mesh.modifier.PGPRemesh.torus.ply")

modifier = setup.document.new_node("PGPRemesh")
modifier.use_smooth = True
modifier.steps = 15
modifier.h = 1000
modifier.omega = 10
modifier.div = 4
modifier.triangulate = True
document.set_dependency(modifier.get_property("input_mesh"),
                        setup.reader.get_property("output_mesh"))

#print "source output: " + repr(source.output_mesh)
#print "triangles output: " + repr(triangles.output_mesh)
#print "modifier output: " + repr(modifier.output_mesh)

testing.mesh_comparison_to_reference(document,
                                     modifier.get_property("output_mesh"),
                                     "mesh.modifier.PGPRemesh.torus", 1)

Beispiel #26

#python

import testing

setup = testing.setup_mesh_reader_test("3DSMeshReader",
                                       "mesh.source.3DSMeshReader.test.3ds")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.reader.get_property("output_mesh"),
                                     "mesh.source.3DSMeshReader.test", 1)