def init_gui(self):
"Build the GUI."
self.root.title('Gas Property Calculator')
self.grid(column=0, row=0, sticky='nsew')
# Initialize Variables
self.initial_type = None
self.final_type = None
# Mixture creation
species = []
species_vals = []
num_species = 9 # Number of species to include
for i in range(num_species):
# Create species buttons
specie = tkinter.StringVar()
spec = ttk.Entry(self, width=10, textvariable=specie)
spec.grid(column=0, row=i+1)
val = tkinter.DoubleVar()
vals = ttk.Entry(self, width=12, textvariable=val)
vals.grid(column=1, row=i+1)
species.append(specie)
species_vals.append(val)
self.species = species
self.species_vals = species_vals
int_row = i + 1 # Intermediate row
self.phi = tkinter.StringVar()
self.phi_entry = ttk.Entry(self, width=10, textvariable=self.phi)
self.phi_entry.grid(column=1, row=int_row+1)
self.phi.trace('w', self.change_phi) # Run when value changes
ttk.Label(self, text='Equivalence Ratio').grid(column=0, row=int_row+1)
ttk.Label(self, text='Species').grid(column=0, row=0)
ttk.Label(self, text='Relative Moles').grid(column=1, row=0)
# Separator
ttk.Separator(self, orient='horizontal').grid(column=0, row=int_row+2,
columnspan=7,
sticky='ew')
int_row += 3 # Move reference row down a bit
# Initial / Calculated Conditions
self.T = tkinter.StringVar()
self.P = tkinter.StringVar()
self.H = tkinter.StringVar()
self.S = tkinter.StringVar()
self.D = tkinter.StringVar()
self.U = tkinter.StringVar()
self.T_entry = ttk.Entry(self, width=12, textvariable=self.T)
self.P_entry = ttk.Entry(self, width=12, textvariable=self.P)
self.H_entry = ttk.Entry(self, width=12, textvariable=self.H)
self.S_entry = ttk.Entry(self, width=12, textvariable=self.S)
self.D_entry = ttk.Entry(self, width=12, textvariable=self.D)
self.U_entry = ttk.Entry(self, width=12, textvariable=self.U)
self.initial_entries = [self.T_entry, self.P_entry, self.H_entry,
self.S_entry, self.D_entry, self.U_entry]
self.T_entry.grid(column=0, row=int_row+1)
self.P_entry.grid(column=0, row=int_row+2)
self.H_entry.grid(column=0, row=int_row+3)
self.S_entry.grid(column=0, row=int_row+4)
self.D_entry.grid(column=0, row=int_row+5)
self.U_entry.grid(column=0, row=int_row+6)
ttk.Label(self, text='Initial Conditions').grid(column=0, row=int_row)
self.initial_button = ttk.Button(
self, text='Calc. Initial Conditions',
command=self.calculate_initial)
self.initial_button.grid(column=0, row=int_row+7)
# Final Conditions
ttk.Separator(self, orient='vertical').grid(column=3, row=0,
rowspan=25, sticky='ns')
self.T_f = tkinter.StringVar()
self.P_f = tkinter.StringVar()
self.H_f = tkinter.StringVar()
self.S_f = tkinter.StringVar()
self.D_f = tkinter.StringVar()
self.U_f = tkinter.StringVar()
self.T_f_entry = ttk.Entry(self, width=12, textvariable=self.T_f)
self.P_f_entry = ttk.Entry(self, width=12, textvariable=self.P_f)
self.H_f_entry = ttk.Entry(self, width=12, textvariable=self.H_f)
self.S_f_entry = ttk.Entry(self, width=12, textvariable=self.S_f)
self.D_f_entry = ttk.Entry(self, width=12, textvariable=self.D_f)
self.U_f_entry = ttk.Entry(self, width=12, textvariable=self.U_f)
self.final_entries = [self.T_f_entry, self.P_f_entry, self.H_f_entry,
self.S_f_entry, self.D_f_entry, self.U_f_entry]
self.T_f_entry.grid(column=2, row=int_row+1)
self.P_f_entry.grid(column=2, row=int_row+2)
self.H_f_entry.grid(column=2, row=int_row+3)
self.S_f_entry.grid(column=2, row=int_row+4)
self.D_f_entry.grid(column=2, row=int_row+5)
self.U_f_entry.grid(column=2, row=int_row+6)
ttk.Label(self, text='Final Conditions').grid(column=2, row=int_row)
ttk.Label(self, text='Temperature (K)').grid(column=1, row=int_row+1)
ttk.Label(self, text='Pressure (Pa)').grid(column=1, row=int_row+2)
ttk.Label(self, text='Enthalpy (J/kg)').grid(column=1, row=int_row+3)
ttk.Label(self, text='Entropy (J/kg/K)').grid(column=1, row=int_row+4)
ttk.Label(self, text='Density (kg/m^3)').grid(column=1, row=int_row+5)
ttk.Label(self, text='Energy (J/kg)').grid(column=1, row=int_row+6)
self.final_button = ttk.Button(
self, text='Calc. Final Conditions',
command=self.calculate_final)
self.final_button.grid(column=2, row=int_row+7)
# Menu bar
self.root.option_add('*tearOff', 'FALSE')
self.menubar = tkinter.Menu(self.root)
self.menu_file = tkinter.Menu(self.menubar)
self.menu_file.add_command(label='Exit', command=self.on_quit)
self.menu_file.add_command(label='Open Chem. File', command=self.openf)
self.menu_edit = tkinter.Menu(self.menubar)
self.menubar.add_cascade(menu=self.menu_file, label='File')
self.root.config(menu=self.menubar)
# Problem type radio buttons
ttk.Label(self, text='Problem Type').grid(column=4, row=0)
self.problem_type = tkinter.IntVar()
ttk.Radiobutton(self, text='Chemically Frozen',
variable=self.problem_type, value=0,
command=self.change_ptype).grid(column=4, row=1)
ttk.Radiobutton(self, text='Isentropic Compression. cr:',
variable=self.problem_type, value=1,
command=self.change_ptype).grid(column=4, row=2)
ttk.Radiobutton(self, text='Chemical Equilibrium',
variable=self.problem_type, value=2,
command=self.change_ptype).grid(column=4, row=3)
self.cr = tkinter.StringVar()
self.cr_Entry = ttk.Entry(self, width=5, textvariable=self.cr)
self.cr_Entry.grid(column=5, row=2)
self.cr.trace('w', self.change_cr)
self.final_type_int = tkinter.IntVar()
self.finaltype_buttons = [
ttk.Radiobutton(self, text='TP', variable=self.final_type_int,
command=self.change_ftype, value=0),
ttk.Radiobutton(self, text='HP', variable=self.final_type_int,
command=self.change_ftype, value=1),
ttk.Radiobutton(self, text='SP', variable=self.final_type_int,
command=self.change_ftype, value=2),
ttk.Radiobutton(self, text='SD', variable=self.final_type_int,
command=self.change_ftype, value=3),
ttk.Radiobutton(self, text='UV', variable=self.final_type_int,
command=self.change_ftype, value=4),
ttk.Radiobutton(self, text='Manual',
variable=self.final_type_int,
command=self.change_ftype, value=5)
]
count = 5
for button in self.finaltype_buttons:
button.grid(column=4, row=count)
# button.state(statespec=['disabled'])
count += 1
#print
# Calculated mixture properties
self.calc_labels = ['Cp (J/kg/K)', 'Cv (J/kg/K', 'gamma',
'Gibbs (J/kg)', 'MW (kg/kmol)',
'IsoT compressibility (1/Pa)',
'Therm. expansion coeff (1/K)']
self.calc_calls = ['cp', 'cv', 'GAMMA', 'g', 'mean_molecular_weight',
'isothermal_compressibility',
'thermal_expansion_coeff']
i = int_row+8
initials = []
finals = []
for label in self.calc_labels:
init = tkinter.StringVar()
final = tkinter.StringVar()
ttk.Entry(self, width=12, textvariable=init,
state='readonly').grid(column=0, row=i)
ttk.Entry(self, width=12, textvariable=final,
state='readonly').grid(column=2, row=i)
ttk.Label(self, text=label).grid(column=1, row=i)
i += 1
initials.append(init)
finals.append(final)
self.initial_calc = initials
self.final_calc = finals
# Final Composition
ttk.Label(self, text='Final Composition').grid(column=4, row=int_row,
columnspan=2)
ttk.Label(self, text='Species').grid(column=4, row=int_row+1)
ttk.Label(self, text='Mole Fraction').grid(column=5, row=int_row+1)
final_spec = []
final_mole_frac = []
for ind in range(int_row+2, int_row+15):
spec = tkinter.StringVar()
val = tkinter.StringVar()
ttk.Entry(self, width=10, textvariable=spec,
state='readonly').grid(column=4, row=ind)
ttk.Entry(self, width=12, textvariable=val,
state='readonly').grid(column=5, row=ind)
final_spec.append(spec)
final_mole_frac.append(val)
self.final_spec = final_spec
self.final_mole_frac = final_mole_frac
# Initialize chemistry file to therm.cti
self.chemfile = os.path.join(sys.path[0], 'therm.cti')
def __init__(self, master):
self.master = master
self.master.title("Nagrody za kody")
self.master.geometry('700x500')
self.frame1 = tk.Frame(master)
self.frame1.pack(fill='both', expand=True)
self.button_import = tk.Button(self.frame1,
text="Import plików Excel",
command=lambda: self.file_choose())
self.button_import.pack()
self.button_save = tk.Button(
self.frame1,
text="Podaj lokalizację zapisu",
command=lambda: self.choose_save_location())
self.button_save.pack()
self.label_file_count = tk.Label(self.frame1)
self.label_file_count.pack()
self.var_win = tk.IntVar()
self.checkbox_win = tk.Checkbutton(
self.frame1,
text="Sprawdzaj max/min dla PPE",
variable=self.var_win,
command=lambda: self.label_state(self.var_win.get()))
self.checkbox_win.pack(anchor="e")
self.win_count = tk.StringVar()
self.win_entry = tk.Entry(self.frame1,
textvariable=self.win_count,
state="disabled")
self.win_entry.pack(anchor="e")
self.var_SE = tk.IntVar()
self.checkbox_SE = tk.Checkbutton(
self.frame1,
text="Nie uwzględniaj sprzedawców kompleksowych",
variable=self.var_SE)
self.checkbox_SE.pack(anchor="e")
self.var1 = tk.IntVar()
self.checkbox_1 = tk.Checkbutton(self.frame1,
text="Dane pewne - kolor zielony",
variable=self.var1)
self.checkbox_1.pack(anchor="w")
self.var2 = tk.IntVar()
self.checkbox_2 = tk.Checkbutton(self.frame1,
text="Dane niepewne - kolor czerwony",
variable=self.var2)
self.checkbox_2.pack(anchor="w")
self.var3 = tk.IntVar()
self.checkbox_3 = tk.Checkbutton(
self.frame1,
text="Dane prognozowane - kolor niebieski",
variable=self.var3)
self.checkbox_3.pack(anchor="w")
self.var4 = tk.IntVar()
self.checkbox_4 = tk.Checkbutton(self.frame1,
text="Dane ręczne - kolor różowy",
variable=self.var4)
self.checkbox_4.pack(anchor="w")
self.var5 = tk.IntVar()
self.checkbox_5 = tk.Checkbutton(
self.frame1,
text="Braki schematów - kolor turkusowy",
variable=self.var5)
self.checkbox_5.pack(anchor="w")
self.var6 = tk.IntVar()
self.checkbox_6 = tk.Checkbutton(self.frame1,
text="Braki danych - kolor szary",
variable=self.var6)
self.checkbox_6.pack(anchor="w")
self.var7 = tk.IntVar()
self.checkbox_7 = tk.Checkbutton(self.frame1,
text="Zamknięta umowa - kolor biały",
variable=self.var7)
self.checkbox_7.pack(anchor="w")
self.start_button = tk.Button(
self.frame1,
text="Start",
command=lambda: self.start(imported_files, location, self.
progress_var))
self.start_button.pack(anchor="s")
self.progress_var = tk.DoubleVar()
self.label_progress_var = tk.StringVar()
def test_listvariable(self):
widget = self.create()
var = tkinter.DoubleVar(self.root)
self.checkVariableParam(widget, 'listvariable', var)
# PWM 객체 생성 : 11번 핀, 주파수 - 100Hz
p_r = GPIO.PWM(LED_R, 100)
p_y = GPIO.PWM(LED_Y, 100)
p_g = GPIO.PWM(LED_G, 100)
# PWM 신호 출력
p_r.start(0)
p_y.start(0)
p_g.start(0)
# window Obj
window = tk.Tk()
window.geometry('300x300')
# 변수 설정
led_r_value = tk.DoubleVar()
led_y_value = tk.DoubleVar()
led_g_value = tk.DoubleVar()
led_r_value.set(0)
led_y_value.set(0)
led_g_value.set(0)
# duty 값을 변경 함수
def change_duty_r(dc):
p_r.ChangeDutyCycle(led_r_value.get())
def change_duty_y(dc):
p_y.ChangeDutyCycle(led_y_value.get())
# Pin number label
account_number_label = tk.Label(win, text="Account Number", width=30)
# The pin number entry and associated variable.
# Note: Modify this to 'show' PIN numbers as asterisks (i.e. **** not 1234)
pin_number_var = tk.StringVar()
pin_number_var.set("7890")
account_pin_entry = tk.Entry(win, text='PIN Number', show="*", textvariable=pin_number_var, state=DISABLED)
# The balance label and associated variable
balance_var = tk.StringVar()
balance_var.set('Balance: $0.00')
balance_label = tk.Label(win, text="Balance: $0.00", width=20)
# The Entry widget to accept a numerical value to deposit or withdraw
amount_entry_var = tk.DoubleVar()
amount_entry = tk.Entry(win, textvariable=amount_entry_var)
# The transaction text widget holds text of the accounts transactions
transaction_text_widget = tk.Text(win, height=10, width=48)
# The bank account object we will work with
account = BankAccount()
# ---------- Button Handlers for Login Screen ----------
def clear_pin_entry(event):
"""Function to clear the PIN number entry when the Clear / Cancel button is clicked."""
# Clear the pin number entry here
#----------------------需要設定的參數----------------------------------------------
#檔名參數
file_name = tk.StringVar()
file_name.set('ANN_training_data_AC_combination_1129')
#輸入特徵參數
features_Num = tk.IntVar()
features_Num.set(8)
#輸入訓練次數
iteration = tk.IntVar()
iteration.set(20000)
#輸入隱藏層特徵數
hiddenlayer_features = tk.IntVar()
hiddenlayer_features.set(5)
#輸入學習速率
learning_rate = tk.DoubleVar()
learning_rate.set(0.3)
#學習狀況記錄
lossbuck_train = []
lossbuck_test = []
#----------------------需要設定的參數------------------------------------------------
def Tranning_by_Neural_Network():
#---------------------ANN前數據讀檔處理---------------------------------------------
#讀檔創建Dataframe
#filepath='C:\\Users\\richard.weng\\Documents\\Python Scripts\\python_projects\\(1) NIVG Project\\ANN\\'
file_data = file_name.get() + '.csv'
df0 = pd.read_csv(file_data)
parser = argparse.ArgumentParser()
parser.add_argument("--game", "-g", type=str)
args = parser.parse_args()
# Setup game environment and GUI
env = Environment(args.game)
gui = GUI(env.game_name(), env.n_channels)
# Thread safe variables for use with GUI
action = Tk.IntVar()
action.set(0)
action_taken = Tk.BooleanVar()
action_taken.set(False)
action_released = Tk.BooleanVar()
action_released.set(False)
G = Tk.DoubleVar()
G.set(0.0)
is_terminate = Tk.BooleanVar()
is_terminate.set(False)
# Map input keys to agent actions
key_action_map = {' ': 5, 'left': 1, 'up': 2, 'right': 3, 'down': 4}
# Key press handler for human player
def on_key_event(event):
if event.key == 'q': # quit the game
gui.quit()
elif (event.key == 'r'): # reset the game environment
env.reset()
elif (event.key in key_action_map):
def __init__(self, master, app=None):
super(CreateFatigueWindow, self).__init__()
if __name__ == '__main__':
self._initial_structure_obj = test.get_structure_object()
self.load_objects = [
test.get_loa_fls_load(),
test.get_loa_uls_load(),
test.get_bal_fls_load(),
test.get_bal_uls_load()
]
self.active_line = 'line1'
points = test.line_dict['line1']
coords = (test.point_dict['point' + str(points[0])],
test.point_dict['point' + str(points[1])])
self.pressure_coords = self.get_pressure_point_coord_from_two_points(
coords[0], coords[1])
self.comp_objects = [test.get_tank_object()]
self._initial_fatigue_obj = test.get_fatigue_object()
else:
if app._line_to_struc[app._active_line][0] is None:
return
elif app._line_to_struc[app._active_line][0].Stiffener is None:
return
self.app = app
self.active_line = app._active_line
points = app._line_dict[self.active_line]
coords = (app._point_dict['point' + str(points[0])],
app._point_dict['point' + str(points[1])])
self.pressure_coords = self.get_pressure_point_coord_from_two_points(
coords[0], coords[1])
self._initial_structure_obj = app._line_to_struc[
app._active_line][0].Stiffener
self.load_objects = app._line_to_struc[app._active_line][3]
self.comp_objects = [
app._tank_dict['comp' + str(comp_i)]
for comp_i in app.get_compartments_for_line(app._active_line)
]
self._initial_fatigue_obj = app._line_to_struc[self.active_line][2]
self._frame = master
self._frame.wm_title("Specify fatigue properties here.")
self._frame.geometry('1300x810')
self._frame.grab_set()
tk.Label(
self._frame,
text='-- Fatigue calculation for plates according to DNVGL-RP-C203, '
'Section 5 Simplified fatigue analysis --',
font='Verdana 15 bold').place(x=10, y=10)
ent_w = 10
self.new_sn_curve = tk.StringVar()
self.new_k_factor = tk.DoubleVar()
self.new_no_of_cycles = tk.DoubleVar()
self.new_design_life = tk.DoubleVar()
self.new_dff = tk.DoubleVar()
self.new_weibull_loa = tk.DoubleVar()
self.new_weibull_bal = tk.DoubleVar()
self.new_weibull_prt = tk.DoubleVar()
self.new_period_loa = tk.DoubleVar()
self.new_period_bal = tk.DoubleVar()
self.new_period_prt = tk.DoubleVar()
self.new_corr_loc_loa = tk.DoubleVar()
self.new_corr_loc_bal = tk.DoubleVar()
self.new_corr_loc_prt = tk.DoubleVar()
self.new_fraction_loa = tk.DoubleVar()
self.new_fraction_bal = tk.DoubleVar()
self.new_fraction_prt = tk.DoubleVar()
self.new_az_loa = tk.DoubleVar()
self.new_az_bal = tk.DoubleVar()
self.new_az_prt = tk.DoubleVar()
sn_curves = sn.get_all_curves()
self.ent_sn_curve = tk.OptionMenu(self._frame,
self.new_sn_curve,
command=self.change_sn_curve,
*sn_curves)
self.ent_dff = tk.Entry(self._frame,
textvariable=self.new_dff,
width=ent_w)
self.ent_k_factor = tk.Entry(self._frame,
textvariable=self.new_k_factor,
width=ent_w)
self.ent_no_of_cycles = tk.Entry(self._frame,
textvariable=self.new_no_of_cycles,
width=ent_w)
self.ent_new_design_life = tk.Entry(self._frame,
textvariable=self.new_design_life,
width=ent_w)
self.ent_weibull_loa = tk.Entry(self._frame,
textvariable=self.new_weibull_loa,
width=ent_w)
self.ent_weibull_bal = tk.Entry(self._frame,
textvariable=self.new_weibull_bal,
width=ent_w)
self.ent_weibull_prt = tk.Entry(self._frame,
textvariable=self.new_weibull_prt,
width=ent_w)
self.ent_period_loa = tk.Entry(self._frame,
textvariable=self.new_period_loa,
width=ent_w)
self.ent_period_bal = tk.Entry(self._frame,
textvariable=self.new_period_bal,
width=ent_w)
self.ent_period_prt = tk.Entry(self._frame,
textvariable=self.new_period_prt,
width=ent_w)
self.ent_corr_loc_loa = tk.Entry(self._frame,
textvariable=self.new_corr_loc_loa,
width=ent_w)
self.ent_corr_loc_bal = tk.Entry(self._frame,
textvariable=self.new_corr_loc_bal,
width=ent_w)
self.ent_corr_loc_prt = tk.Entry(self._frame,
textvariable=self.new_corr_loc_prt,
width=ent_w)
self.ent_fraction_loa = tk.Entry(self._frame,
textvariable=self.new_fraction_loa,
width=ent_w)
self.ent_fraction_bal = tk.Entry(self._frame,
textvariable=self.new_fraction_bal,
width=ent_w)
self.ent_fraction_prt = tk.Entry(self._frame,
textvariable=self.new_fraction_prt,
width=ent_w)
self.ent_acc_loa = tk.Entry(self._frame,
textvariable=self.new_az_loa,
width=ent_w)
self.ent_acc_bal = tk.Entry(self._frame,
textvariable=self.new_az_bal,
width=ent_w)
self.ent_acc_prt = tk.Entry(self._frame,
textvariable=self.new_az_prt,
width=ent_w)
start_x, start_y, dx, dy = 20, 100, 150, 35
loaded_exist = False
ballast_exist = False
part_exist = False
fls_exist = (loaded_exist, ballast_exist, part_exist)
# Frames to hide loaded, ballast or part
loa_fr = tk.Frame(self._frame,
width=100,
height=170,
bg="gray25",
colormap="new")
bal_fr = tk.Frame(self._frame,
width=100,
height=170,
bg="gray25",
colormap="new")
prt_fr = tk.Frame(self._frame,
width=100,
height=170,
bg="gray25",
colormap="new")
for load in self.load_objects:
if load != None:
if load.get_limit_state() == 'FLS':
if load.get_load_condition() == 'loaded':
loaded_exist = True
elif load.get_load_condition() == 'ballast':
ballast_exist = True
elif load.get_load_condition() == 'part':
part_exist = True
else:
pass
fls_exist = (loaded_exist, ballast_exist, part_exist)
if self._initial_fatigue_obj == None:
self.new_sn_curve.set('Ec')
self.new_k_factor.set(1)
self.new_no_of_cycles.set(10000)
self.new_design_life.set(20)
self.new_dff.set(2)
if any(fls_exist):
if loaded_exist:
self.new_fraction_loa.set(1 / fls_exist.count(True))
self.new_weibull_loa.set(0.8)
self.new_period_loa.set(8)
self.new_corr_loc_loa.set(0.5)
self.new_az_loa.set(0.5)
if ballast_exist:
self.new_fraction_bal.set(1 / fls_exist.count(True))
self.new_weibull_bal.set(0.8)
self.new_period_bal.set(8)
self.new_corr_loc_bal.set(0.5)
self.new_az_bal.set(0.5)
if part_exist:
self.new_fraction_prt.set(1 / fls_exist.count(True))
self.new_weibull_prt.set(0.8)
self.new_period_prt.set(8)
self.new_corr_loc_prt.set(0.5)
self.new_az_prt.set(0.5)
else:
fat_prop = self._initial_fatigue_obj.get_fatigue_properties()
self.new_sn_curve.set(fat_prop['SN-curve'])
self.new_k_factor.set(fat_prop['SCF'])
self.new_no_of_cycles.set(fat_prop['n0'])
self.new_design_life.set(fat_prop['Design life'])
self.new_dff.set(fat_prop['DFF'])
if any(fls_exist):
if loaded_exist:
self.new_fraction_loa.set(fat_prop['Fraction'][0])
self.new_weibull_loa.set(fat_prop['Weibull'][0])
self.new_period_loa.set(fat_prop['Period'][0])
self.new_corr_loc_loa.set(fat_prop['CorrLoc'][0])
self.new_az_loa.set(fat_prop['Accelerations'][0])
if ballast_exist:
self.new_fraction_bal.set(fat_prop['Fraction'][1])
self.new_weibull_bal.set(fat_prop['Weibull'][1])
self.new_period_bal.set(fat_prop['Period'][1])
self.new_corr_loc_bal.set(fat_prop['CorrLoc'][1])
self.new_az_bal.set(fat_prop['Accelerations'][1])
if part_exist:
self.new_fraction_prt.set(fat_prop['Fraction'][2])
self.new_weibull_prt.set(fat_prop['Weibull'][2])
self.new_period_prt.set(fat_prop['Period'][2])
self.new_corr_loc_prt.set(fat_prop['CorrLoc'][2])
self.new_az_prt.set(fat_prop['Accelerations'][2])
all_acc = (self.new_az_loa.get(), self.new_az_bal.get(),
self.new_az_prt.get())
count = 1
for load in self.load_objects:
if load == None:
continue
press = []
if load.get_limit_state() == 'FLS':
tk.Label(self._frame, text=str(count)+'. '+load.get_name(), font='Verdana 8')\
.place(x=start_x + 5 * dx, y=start_y + (5+count) * dy)
idx = 0
for exist in fls_exist:
if exist:
press.append(
round(
load.get_calculated_pressure(
self.pressure_coords, all_acc[idx],
self._initial_structure_obj.
get_structure_type()), 1))
idx += 1
tk.Label(self._frame, text=press, font='Verdana 8') \
.place(x=start_x + 6.5 * dx, y=start_y + (5 + count) * dy)
count += 1
press = []
for comp in self.comp_objects:
if comp == None:
continue
tk.Label(self._frame, text=str(count) + '. ' +str(comp.get_name()), font='Verdana 8') \
.place(x=start_x + 5 * dx, y=start_y + (5 + count) * dy)
idx = 0
if fls_exist[0] and comp.is_loaded_condition():
press.append(
round(
comp.get_calculated_pressure(self.pressure_coords,
all_acc[0]), 1))
if fls_exist[1] and comp.is_ballast_condition():
press.append(
round(
comp.get_calculated_pressure(self.pressure_coords,
all_acc[1]), 1))
if fls_exist[2] and any(
[comp.is_loaded_condition(),
comp.is_ballast_condition()]):
press.append(
round(
comp.get_calculated_pressure(self.pressure_coords,
all_acc[2]), 1))
tk.Label(self._frame, text=press, font='Verdana 8') \
.place(x=start_x + 6.5 * dx, y=start_y + (5 + count) * dy)
count += 1
tk.Label(self._frame, text='Design life:', font='Verdana 8 bold') \
.place(x=start_x , y=start_y + 0*dy)
tk.Label(self._frame, text='Design Fatigue Factor (DFF):', font='Verdana 8 bold') \
.place(x=start_x+ 3*dx , y=start_y + 0*dy)
tk.Label(self._frame, text='SN-curve:', font='Verdana 8 bold') \
.place(x=start_x , y=start_y + 1*dy)
tk.Label(self._frame, text='Cycles in return period, n0', font='Verdana 8 bold') \
.place(x=start_x , y=start_y + 2*dy)
tk.Label(self._frame, text='Stress Concentration Factor, SCF', font='Verdana 8 bold') \
.place(x=start_x , y=start_y + 3*dy)
tk.Label(self._frame, text='Loaded', font='Verdana 8 bold') \
.place(x=start_x+2*dx , y=start_y + 5*dy)
tk.Label(self._frame, text='Ballast', font='Verdana 8 bold') \
.place(x=start_x+3*dx , y=start_y + 5*dy)
tk.Label(self._frame, text='Part', font='Verdana 8 bold') \
.place(x=start_x+4*dx , y=start_y + 5*dy)
tk.Label(self._frame, text='Defined loads', font='Verdana 8 bold') \
.place(x=start_x+5*dx , y=start_y + 5*dy)
tk.Label(self._frame, text='Resulting pressures', font='Verdana 8 bold') \
.place(x=start_x+6.5*dx , y=start_y + 5*dy)
tk.Label(self._frame, text='Fraction (sum of bal/part/loa is 1)', font='Verdana 8 bold') \
.place(x=start_x, y=start_y + 6 * dy)
tk.Label(self._frame, text='Weibull', font='Verdana 8 bold') \
.place(x=start_x , y=start_y + 7*dy)
tk.Label(self._frame, text='Period', font='Verdana 8 bold') \
.place(x=start_x , y=start_y + 8*dy)
tk.Label(self._frame, text='Corr. loc.', font='Verdana 8 bold') \
.place(x=start_x , y=start_y + 9*dy)
tk.Label(self._frame, text='Accelerations', font='Verdana 8 bold') \
.place(x=start_x , y=start_y + 10*dy)
self.ent_new_design_life.place(x=start_x + 2 * dx, y=start_y + 0 * dy)
self.ent_dff.place(x=start_x + 5 * dx, y=start_y + 0 * dy)
self.ent_sn_curve.place(x=start_x + 2 * dx, y=start_y + 1 * dy)
self.ent_no_of_cycles.place(x=start_x + 2 * dx, y=start_y + 2 * dy)
self.ent_k_factor.place(x=start_x + 2 * dx, y=start_y + 3 * dy)
self.ent_fraction_loa.place(x=start_x + 2 * dx, y=start_y + 6 * dy)
self.ent_fraction_bal.place(x=start_x + 3 * dx, y=start_y + 6 * dy)
self.ent_fraction_prt.place(x=start_x + 4 * dx, y=start_y + 6 * dy)
self.ent_weibull_loa.place(x=start_x + 2 * dx, y=start_y + 7 * dy)
self.ent_weibull_bal.place(x=start_x + 3 * dx, y=start_y + 7 * dy)
self.ent_weibull_prt.place(x=start_x + 4 * dx, y=start_y + 7 * dy)
self.ent_period_loa.place(x=start_x + 2 * dx, y=start_y + 8 * dy)
self.ent_period_bal.place(x=start_x + 3 * dx, y=start_y + 8 * dy)
self.ent_period_prt.place(x=start_x + 4 * dx, y=start_y + 8 * dy)
self.ent_corr_loc_loa.place(x=start_x + 2 * dx, y=start_y + 9 * dy)
self.ent_corr_loc_bal.place(x=start_x + 3 * dx, y=start_y + 9 * dy)
self.ent_corr_loc_prt.place(x=start_x + 4 * dx, y=start_y + 9 * dy)
self.ent_acc_loa.place(x=start_x + 2 * dx, y=start_y + 10 * dy)
self.ent_acc_bal.place(x=start_x + 3 * dx, y=start_y + 10 * dy)
self.ent_acc_prt.place(x=start_x + 4 * dx, y=start_y + 10 * dy)
# if not loaded_exist:
# loa_fr.place(x=start_x + 2 * dx, y=start_y + 6 * dy)
# elif not ballast_exist:
# bal_fr.place(x=start_x + 3 * dx, y=start_y + 6 * dy)
# elif not part_exist:
# prt_fr.place(x=start_x + 4 * dx, y=start_y + 6 * dy)
self._close_and_save = tk.Button(self._frame,
text='Return fatigue parameters',
command=self.save_and_close,
bg='green',
font='Verdana 15',
fg='yellow')
self._close_and_save.place(x=start_x + dx, y=start_y + dy * 15)
def test_configure_variable(self):
widget = self.create()
var = tkinter.DoubleVar(self.root)
self.checkVariableParam(widget, 'variable', var)
def create_user_panel(self) -> object:
self.x_label = tk.Label(text="X")
self.x_label.grid(row=1, column=1)
self.x_value = tk.DoubleVar()
self.x_coor = tk.Entry(bd=5, textvariable=self.x_value)
self.x_coor.grid(row=1, column=2)
self.y_label = tk.Label(text="Y")
self.y_label.grid(row=2, column=1)
self.y_value = tk.DoubleVar()
self.y_coor = tk.Entry(bd=5, textvariable=self.y_value)
self.y_coor.grid(row=2, column=2)
self.u_label = tk.Label(text="U")
self.u_label.grid(row=1, column=3)
self.u_value = tk.DoubleVar()
self.u_coor = tk.Entry(bd=5, textvariable=self.u_value)
self.u_coor.grid(row=1, column=4)
self.v_label = tk.Label(text="V")
self.v_label.grid(row=2, column=3)
self.v_value = tk.DoubleVar()
self.v_coor = tk.Entry(bd=5, textvariable=self.v_value)
self.v_coor.grid(row=2, column=4)
self.m_label = tk.Label(text="M")
self.m_label.grid(row=3, column=1)
self.m = tk.Scale(variable="weight",
activebackground="red",
orient="horizontal")
self.m.grid(row=3, column=2)
self.create_point = tk.Button(text="generate",
command=self.CreateRandom)
self.create_point.grid(row=3, column=3, columnspan=1)
self.create_point = tk.Button(text="create", command=self.CreatePoint)
self.create_point.grid(row=3, column=4, columnspan=1)
#self.Verle_value = tk.IntVar()
# self.Verle1 = tk.Radiobutton(text="Верле(Python)", variable=self.Verle_value, value=1, indicatoron=0)
# self.Verle1.grid(row=4, column=1)
#
# self.Verle2 = tk.Radiobutton(text="Верле(odeint)", variable=self.Verle_value, value=2, indicatoron=0)
# self.Verle2.grid(row=4, column=2)
#
# self.Verle3 = tk.Radiobutton(text="Верле(cython)",variable=self.Verle_value, value=3, indicatoron=0)
# self.Verle3.grid(row=4, column=3)
#
# self.Verle4 = tk.Radiobutton(text="Верле(parallel)", variable=self.Verle_value, value=4, indicatoron=0)
# self.Verle4.grid(row=4, column=4)
# self.x_label = tk.Label(text="emitter_X")
# self.x_label.grid(row=5, column=1)
# self.x_coor = tk.Entry(bd=5)
# self.x_coor.grid(row=5, column=2)
# self.emitter_y_label = tk.Label(text="emitter_Y")
# self.emitter_y_label.grid(row=5, column=3)
# self.emitter_y_coor = tk.Entry(bd=5)
# self.emitter_y_coor.grid(row=5, column=4)
self.options = [
"Верле(Python)", "Odeint", "Верле(cython)", "Верле(parallel)"
]
self.Verle_value = tk.StringVar()
self.Verle_value.set("Верле(Python)")
self.Verle = tk.OptionMenu(root, self.Verle_value, *self.options)
self.Verle.grid(row=5, column=1)
self.Verle.config(font=('calibri', (10)), bg='white', width=12)
self.Verle['menu'].config(font=('calibri', (10)), bg='white')
self.verle_step = tk.Button(text="play", command=self.Play)
self.verle_step.grid(row=5, column=2)
self.verle_step = tk.Button(text="verle step", command=self.NextStep)
self.verle_step.grid(row=7, column=1)
self.verle_step = tk.Button(text="calculate time",
command=self.CalculateTime)
self.verle_step.grid(row=7, column=2)
def __init__(self, root, master, *args, **kwargs):
self.master = master
self.root = root
self.activation_function = "Symmetrical Hard limit"
self.hebbian_rule = "Delta Rule"
self.alpha = 0.1
self.nUnit = 10
self.t = -1 * np.ones((10,1000))
# self.t.fill(-1.0/9.0)
self.p = np.ones((785, 1000), dtype=np.float32)
self.training_input = np.zeros((785, 800))
self.training_target = np.zeros((10, 800))
self.testing_input = np.zeros((785, 200))
self.testing_target = np.zeros((10, 200))
self.load_input_vector()
self.weight = np.zeros((10, 785))
#self.weight = (self.weight * 0.002) - 0.001
self.x = np.zeros(100)
self.y = np.zeros(100)
self.x_start = 0
#########################################################################
# Set up the constants and default values
#########################################################################
self.xmin = 0
self.xmax = 1000
self.ymin = 0
self.ymax = 100
#########################################################################
# Set up the plotting area
#########################################################################
self.plot_frame = tk.Frame(self.master)
self.plot_frame.grid(row=0, column=0, columnspan=2, sticky=tk.N + tk.E + tk.S + tk.W)
self.plot_frame.rowconfigure(0, weight=1)
self.plot_frame.columnconfigure(0, weight=1)
self.figure = plt.figure("")
self.axes = self.figure.gca()
self.axes.set_xlabel('Epoch')
self.axes.set_ylabel('Error rate')
self.axes.set_title("")
plt.xlim(self.xmin, self.xmax)
plt.ylim(self.ymin, self.ymax)
self.canvas = FigureCanvasTkAgg(self.figure, master=self.plot_frame)
self.plot_widget = self.canvas.get_tk_widget()
self.plot_widget.grid(row=0, column=0, sticky=tk.N + tk.E + tk.S + tk.W)
#########################################################################
# Set up the frame for sliders (scales)
#########################################################################
self.sliders_frame = tk.Frame(self.master)
self.sliders_frame.grid(row=1, column=0, sticky=tk.N + tk.E + tk.S + tk.W)
self.sliders_frame.rowconfigure(0, weight=10)
self.sliders_frame.rowconfigure(1, weight=2)
self.sliders_frame.columnconfigure(0, weight=5, uniform='xx')
self.sliders_frame.columnconfigure(1, weight=1, uniform='xx')
# set up the sliders
self.alpha_slider = tk.Scale(self.sliders_frame, variable=tk.DoubleVar(), orient=tk.HORIZONTAL,
from_=0.001, to_=1.0, resolution=0.01, bg="#DDDDDD",
activebackground="#FF0000",
highlightcolor="#00FFFF",
label="Alpha",
command=lambda event: self.alpha_slider_callback())
self.alpha_slider.set(self.alpha)
self.alpha_slider.bind("<ButtonRelease-1>", lambda event: self.alpha_slider_callback())
self.alpha_slider.grid(row=2, column=0, sticky=tk.N + tk.E + tk.S + tk.W)
#########################################################################
# Set up the frame for button(s)
#########################################################################
self.buttons_frame = tk.Frame(self.master)
self.buttons_frame.grid(row=1, column=1, sticky=tk.N + tk.E + tk.S + tk.W)
self.buttons_frame.rowconfigure(0, weight=1)
self.buttons_frame.columnconfigure(0, weight=1, uniform='xx')
self.label_for_hebbian_rule = tk.Label(self.buttons_frame, text="Select Learning Method",
justify="center")
self.label_for_hebbian_rule.grid(row=3, column=0, sticky=tk.N + tk.E + tk.S + tk.W)
self.hebbian_rule_variable = tk.StringVar()
self.hebbian_rule_dropdown = tk.OptionMenu(self.buttons_frame, self.hebbian_rule_variable,
"Filtered Learning", "Delta Rule", "Unsupervised Hebb",
command=lambda
event: self.hebbian_rule_dropdown_callback())
self.hebbian_rule_variable.set("Delta Rule")
self.hebbian_rule_dropdown.grid(row=4, column=0, sticky=tk.N + tk.E + tk.S + tk.W)
self.label_for_activation_function = tk.Label(self.buttons_frame, text="Transfer Function",
justify="center")
self.label_for_activation_function.grid(row=5, column=0, sticky=tk.N + tk.E + tk.S + tk.W)
self.activation_function_variable = tk.StringVar()
self.activation_function_dropdown = tk.OptionMenu(self.buttons_frame, self.activation_function_variable,
"Symmetrical Hard limit", "Hyperbolic Tangent", "Linear",
command=lambda
event: self.activation_function_dropdown_callback())
self.activation_function_variable.set("Hyperbolic Tangent")
self.activation_function_dropdown.grid(row=6, column=0, sticky=tk.N + tk.E + tk.S + tk.W)
self.draw_button = tk.Button(self.buttons_frame, text="Randomize Weights", fg="blue",width=16, command=self.randomize_weight)
self.draw_button.grid(row=0, column=0)
self.draw_button = tk.Button(self.buttons_frame, text="Adjust Weights (Learn)", fg="red",width=16, command=self.adjust_weight)
self.draw_button.grid(row=1, column=0)
print("Window size:", self.master.winfo_width(), self.master.winfo_height())
def __init__(self, master, trackapp=None, tokenlist=None, *args, **kwargs):
super().__init__(master, *args, **kwargs)
self.pack(side=tk.LEFT, expand=True, fill=tk.BOTH)
self.trackapp = trackapp
# app title
version = "1.1.4a"
self.master.title("Elevation Editor v." + version)
new_tags = self.bindtags() + ("all", )
self.bindtags(new_tags)
# token and brush data
self._tokens = tuple()
self._elevationProfiles = []
self._drag_data = {'x': 0, 'y': 0, 'items': [], 'feather': []}
self._brush_data = {
'x': 0,
'r': tk.DoubleVar(value=10),
'f0': tk.DoubleVar(value=10),
'f1': tk.DoubleVar(value=10)
} #r = brush radius, f = feather radius
self._brushes = tuple()
self._feathers = tuple()
self._leftfeather = False
self._rightfeather = False
self._feathermode2 = [tk.StringVar(), tk.StringVar()]
self._mouselabel = {
"x_coord": 0,
"y_coord": 0,
'x': tk.StringVar(),
'z': tk.StringVar()
}
self._mousepos = {'x': 0, 'y': 0}
self._widgetsize = (None, None)
self._past = []
self._future = []
# set offset, scales
self._high_x = 0
self._high_y = 0
self._low_x = 0
self._low_y = 0
self._first_z = 0
self._brush_offset = self._high_x - self._low_x
self._y_scale = -5.0
self._x_scale = 1.0
self._slopescale = -500
self.isLoop = 0
# set graphics
self.line_width = 2
can_bg = "#6090CC"
self.c_gridFill = "#4C74A4"
gCan_bg = "#303030"
self.g_gridFill = "#202020"
self.tokenFill = "#FFFFFF"
self.brushFill = "#5682B8"
self.featherFill = "#5B89C2"
### MENUS ----------------------------------------------------------------------------------
# create a toplevel menu and a frame
self.menubar = tk.Menu(self)
#create pulldown file menu
filemenu = tk.Menu(self.menubar, tearoff=0)
filemenu.add_command(label="Load", command=self._load_ted)
filemenu.add_command(label="Export", command=self._export_ted)
filemenu.add_separator()
#filemenu.add_command(label="Import elevation profile", command=self._import_ep)
filemenu.add_command(label="Export elevation profile",
command=self._export_ep)
filemenu.add_separator()
filemenu.add_command(label="Quit", command=self.quit)
self.menubar.add_cascade(label="File", menu=filemenu)
#create pulldown edit menu
editmenu = tk.Menu(self.menubar, tearoff=0)
editmenu.add_command(label="Undo", command=self._undo)
editmenu.add_command(label="Redo",
command=lambda: self._undo(arg="redo"))
self.menubar.add_cascade(label="Edit", menu=editmenu)
#create pulldown help menu
helpmenu = tk.Menu(self.menubar, tearoff=0)
helpmenu.add_command(label="Quick reference",
command=self._quick_reference)
self.menubar.add_cascade(label="Help", menu=helpmenu)
#display the menu
self.master.config(menu=self.menubar)
#left panel
self.leftPanel = dg.LeftPanel(self)
### CREATE CANVASES ---------------------------------------------------------------------------
c_width = 600
# create a token canvas
self.canvas = tk.Canvas(self,
width=c_width,
bg=can_bg,
height=400,
bd=1,
relief="groove")
new_tags = self.canvas.bindtags() + ("brusharea", "all")
self.canvas.bindtags(new_tags)
#create a graph canvas
self.graphCanvas = tk.Canvas(self,
width=c_width,
bg=gCan_bg,
height=200,
bd=1,
relief="groove")
new_tags = self.graphCanvas.bindtags() + ("brusharea", "all")
self.graphCanvas.bindtags(new_tags)
# create the brush
self._create_brush(self._brush_data['x'])
### SCROLLBARS ---------------------------------------------------------------------------------
#add scrollbars
self.hbar = tk.Scrollbar(self, orient="horizontal", command=self.xview)
self.vbar = tk.Scrollbar(self, orient="vertical", command=self.yview)
self.canvas.config(xscrollcommand=self.hbar.set,
yscrollcommand=self.vbar.set)
#add scalebar
self.graphScaleBar = tk.Scrollbar(self,
orient="vertical",
command=self.graphScale)
### RULERS -----------------------------------------------------------------------------------
self.r_width = 50
#horizontal
self.hruler = tk.Canvas(self, width=c_width, height=15,
bd=1) #horizontal
self.c_vruler = tk.Canvas(self, width=self.r_width, height=15,
bd=1) #canvas
self.g_vruler = tk.Canvas(self, width=self.r_width, height=15,
bd=1) #graph
### BINDINGS ------------------------------------------------------------------------------------
self.bind_class("brusharea", "<ButtonPress-1>",
self.OnTokenButtonPress)
self.bind_class("brusharea", "<ButtonRelease-1>",
self.OnTokenButtonRelease)
self.bind_class("brusharea", "<B1-Motion>", self.OnTokenMotion)
self.bind_class("brusharea", "<Shift-B1-Motion>",
self.ShiftOnTokenMotion)
self.bind_class("brusharea", "<Motion>", self.OnMotion)
self.bind_class("brusharea", '<MouseWheel>', self.MouseWheel)
self.bind_class("brusharea", '<Shift-MouseWheel>',
self.ShiftMouseWheel)
self.bind_class("brusharea", '<Control-MouseWheel>',
self.ControlMouseWheel)
self.bind_class("brusharea", '<Shift-Control-MouseWheel>',
self.ShiftControlMouseWheel)
self.bind_class("brusharea", '<ButtonPress-3>', self.Button3Press)
self.bind_class("brusharea", '<B3-Motion>', self.MouseScroll)
self.bind('f', self.FButtonPress)
self.bind('s', self.SButtonPress)
self.bind('z', self.zkey)
self.bind('<Alt-z>', self.altzkey)
self.bind('<Control-z>', self._undo)
self.bind('<Control-y>', self._undo)
self.bind('<Left>', self._leftkey)
self.bind('<Right>', self._rightkey)
self.bind('<Configure>', self._my_configure)
self.bind('<Return>', self._returnkey)
### GEOMETRY MANAGEMENT ---------------------------------------------------------------------
self.leftPanel.grid(row=0, column=0, rowspan=3, sticky="NS")
self.canvas.grid(row=0, column=2, sticky="WENS")
self.graphCanvas.grid(row=2, column=2, sticky="WE")
self.hbar.grid(row=3, column=2, sticky="WE")
self.vbar.grid(row=0, column=3, sticky="NS")
self.graphScaleBar.grid(row=2, column=3, sticky="NS")
self.hruler.grid(row=1, column=2, sticky="WE")
self.c_vruler.grid(row=0, column=1, sticky="NS")
self.g_vruler.grid(row=2, column=1, sticky="NS")
self.columnconfigure(2, weight=1)
self.rowconfigure(0, weight=1)
### OTHER ---------------------------------------------------------------------------------
self.update_idletasks()
self.focus_set()
"""A tour of ttk widgets we can use in our application"""
import tkinter as tk
from tkinter import ttk
root = tk.Tk()
my_string_var = tk.StringVar(value='Test')
my_int_var = tk.IntVar()
my_dbl_var = tk.DoubleVar()
my_bool_var = tk.BooleanVar()
pack_args = {"padx": 20, "pady": 20}
def my_callback(*_):
print("Callback called!")
# Entry
myentry = ttk.Entry(root, textvariable=my_string_var, width=20)
myentry.pack(**pack_args)
# Spinbox
myspinbox = ttk.Spinbox(root,
from_=0,
to=100,
increment=.01,
textvariable=my_int_var,
command=my_callback)
def __init__(self, master=None):
"""Application initialization
"""
tk.Frame.__init__(self, master)
try:
self.ser=serial.Serial('/dev/ttyUSB0', 9600, timeout=10, parity = serial.PARITY_NONE) #Keithley serial port - COM4: Deskotp, COM5: Laptop
except:
print("No serial port for keithley")
try:
self.ser1=serial.Serial('/dev/ttyACM0', 9600, timeout=10, parity = serial.PARITY_NONE) #Arduino serial port
except:
print("No serial port for arduino")
self.fig = plt.Figure(figsize=(7, 6), dpi=100)
self.fig.suptitle("I-V Sweep")
self.a = self.fig.add_subplot(111)
self.a.grid(b=True, which='major', color='r', linestyle='--')
self.start = tk.DoubleVar()
self.start.set(0.0)
self.stop = tk.DoubleVar()
self.stop.set(0.5)
self.steps = tk.IntVar()
self.steps.set(100)
self.compliance = tk.DoubleVar()
self.compliance.set(0.005)
self.delay = tk.DoubleVar()
self.delay.set(0.1)
self.loops = tk.IntVar()
self.loops.set(1)
self.loopCount = tk.IntVar()
self.loopCount.set(1)
self.filenamenumber = tk.IntVar()
self.filenamenumber.set(0)
self.filename = tk.StringVar()
self.filename.set("Sweep_")
self.filenametext = tk.StringVar()
self.setfilename()
self.modes = tk.IntVar()
self.modes.set(0)
self.holdMode = tk.IntVar()
self.holdMode.set(0)
#Graph Variables
self.XStart = tk.DoubleVar()
self.XStart.set(0.0)
self.XStop = tk.DoubleVar()
self.XStop.set(0.5)
self.YStop = tk.DoubleVar()
self.YStop.set(0.005)
self.YStart = tk.DoubleVar()
self.YStart.set(-self.YStop.get())
self.mux = tk.IntVar()
self.mux.set(0)
self.quad0 = tk.BooleanVar()
self.quad0.set(False)
self.quad1 = tk.BooleanVar()
self.quad1.set(False)
self.quad2 = tk.BooleanVar()
self.quad2.set(False)
self.quad3 = tk.BooleanVar()
self.quad3.set(False)
self.columnconfigure(0, pad = 2)
self.createWidgets()
self.grid()
def __init__(self, from_master):
sg.RaModuleGui.__init__(self, from_master)
self.ww = 740 # window width
self.wh = 900 # window height
self.title = "Project Maker"
self.set_geometry(self.ww, self.wh, self.title)
self.condition_i_list = []
self.condition_p_list = []
self.condition_pl_list = []
self.condition_ter_list = []
self.condition_init = ""
self.condition_proj = ""
self.dir2prj = "" # os.path.dirname(os.path.abspath(__file__)) + "\\Geodata\\"
self.dir2ap = config.dir2ml + "Output\\Rasters\\"
self.fish = {}
self.fish_applied = {}
self.n = 0.04
self.txcr = 0.047
self.version = ""
self.w_e = 14 # width of entries
self.w_lb = 20 # width of listboxes
self.xlsx_file_name = ""
self.get_condition_lists()
self.apply_wua = tk.BooleanVar()
self.cover_app_pre = tk.BooleanVar()
self.cover_app_post = tk.BooleanVar()
self.prj_name = tk.StringVar()
self.ter_cr = tk.DoubleVar()
self.vege_cr = tk.DoubleVar()
self.vege_stab_cr = tk.DoubleVar()
self.complete_menus()
# Create LABELS, ENTRIES and BUTTONS from LEFT to RIGHT and TOP-DOWN
msg0 = "Welcome to the project maker GUI."
msg1 = "Info - buttons help identifying requirements for running individual modules.\n\n"
msg2 = "START: DEFINE AND VALIDATE VARIABLES\n"
self.l_welcome = tk.Label(self,
fg="white",
background="gray45",
text=msg0 + msg1 + msg2)
self.l_welcome.grid(sticky=tk.EW,
row=0,
column=0,
rowspan=2,
columnspan=3,
padx=self.xd,
pady=self.yd)
self.l_version = tk.Label(self, text="Project version: ")
self.l_version.grid(sticky=tk.W,
row=3,
column=0,
padx=self.xd,
pady=self.yd)
self.e_version = tk.Entry(self,
width=self.w_e,
textvariable=self.version)
self.e_version.grid(sticky=tk.EW,
row=3,
column=1,
padx=self.xd,
pady=self.yd)
self.l_version_help = tk.Label(
self, fg="gray26", text="(3-digits: v+INT+INT, example: v10)")
self.l_version_help.grid(sticky=tk.W,
row=3,
column=2,
padx=self.xd,
pady=self.yd)
self.l_site_name = tk.Label(self, text="Project name: ")
self.l_site_name.grid(sticky=tk.W,
row=4,
column=0,
padx=self.xd,
pady=self.yd)
self.e_site_name = tk.Entry(self,
width=self.w_e,
textvariable=self.prj_name)
self.e_site_name.grid(sticky=tk.EW,
row=4,
column=1,
padx=self.xd,
pady=self.yd)
self.l_site_name_help = tk.Label(
self, fg="gray26", text="(String, no spaces, example: MySite)")
self.l_site_name_help.grid(sticky=tk.W,
row=4,
column=2,
padx=self.xd,
pady=self.yd)
self.b_val_var = tk.Button(self,
text="VALIDATE VARIABLES",
command=lambda: self.verify_variables())
self.b_val_var.grid(sticky=tk.EW,
row=8,
column=0,
columnspan=3,
padx=self.xd,
pady=self.yd * 2)
self.l_placeholder1 = tk.Label(
self,
fg="white",
background="gray45",
text="ASSESS, DELINEATE AND STABILIZE PLANTINGS")
self.l_placeholder1.grid(sticky=tk.EW,
row=9,
column=0,
columnspan=3,
padx=self.xd,
pady=self.yd * 2)
self.l_vege_cr = tk.Label(
self, text="Do not plant where expected lifespans are less than:")
self.l_vege_cr.grid(sticky=tk.W,
row=10,
column=0,
padx=self.xd,
pady=self.yd)
self.e_vege_cr = tk.Entry(self,
width=self.w_e,
textvariable=self.vege_cr)
self.e_vege_cr.grid(sticky=tk.EW,
row=10,
column=1,
padx=self.xd,
pady=self.yd)
self.l_vege_cr_help = tk.Label(
self, fg="gray26", text=" years (float number, example: 2.5)")
self.l_vege_cr_help.grid(sticky=tk.W,
row=10,
column=2,
padx=self.xd,
pady=self.yd)
self.l_vege_stab_cr = tk.Label(
self,
text="Stabilize plants where expected lifespans are less than:")
self.l_vege_stab_cr.grid(sticky=tk.W,
row=11,
column=0,
padx=self.xd,
pady=self.yd)
self.e_vege_stab_cr = tk.Entry(self,
width=self.w_e,
textvariable=self.vege_stab_cr)
self.e_vege_stab_cr.grid(sticky=tk.EW,
row=11,
column=1,
padx=self.xd,
pady=self.yd)
self.l_vege_stab_cr_help = tk.Label(
self,
fg="gray26",
text=" years (should be higher than above value)")
self.l_vege_stab_cr_help.grid(sticky=tk.W,
row=11,
column=2,
padx=self.xd,
pady=self.yd)
self.l_condition_pl = tk.Label(
self, text="Select plant Max Lifespan Condition: ")
self.l_condition_pl.grid(sticky=tk.W,
row=12,
column=0,
padx=self.xd,
pady=self.yd)
self.sb_condition_pl = tk.Scrollbar(self, orient=tk.VERTICAL)
self.sb_condition_pl.grid(sticky=tk.W,
row=12,
column=2,
padx=0,
pady=self.yd)
self.lb_condition_pl = tk.Listbox(
self,
height=3,
width=self.w_lb,
yscrollcommand=self.sb_condition_pl.set)
self.lb_condition_pl.grid(sticky=tk.EW,
row=12,
column=1,
padx=self.xd,
pady=self.yd)
self.lb_condition_pl.insert(tk.END, "Validate Variables")
self.sb_condition_pl.config(command=self.lb_condition_pl.yview)
self.b_s20 = tk.Button(self,
text="Place best vegetation plantings",
command=lambda: self.start_app("s2X"))
self.b_s20.grid(sticky=tk.EW,
row=13,
column=0,
columnspan=2,
padx=self.xd,
pady=self.yd)
self.b_s20["state"] = "disabled"
self.b_s20_help = tk.Button(self,
width=14,
fg="blue",
bg="white",
text="Info (help)",
command=lambda: self.help_info("s2X"))
self.b_s20_help.grid(sticky=tk.E,
row=13,
column=2,
padx=self.xd,
pady=self.yd * 2)
self.l_placeholder2 = tk.Label(self,
fg="white",
background="gray45",
text="TERRAIN STABILIZATION")
self.l_placeholder2.grid(sticky=tk.EW,
row=14,
column=0,
columnspan=3,
padx=self.xd,
pady=self.yd * 2)
self.l_ter_cr = tk.Label(self,
text="Target lifespan of surface grains:")
self.l_ter_cr.grid(sticky=tk.W,
row=15,
column=0,
padx=self.xd,
pady=self.yd)
self.e_ter_cr = tk.Entry(self,
width=self.w_e,
textvariable=self.ter_cr)
self.e_ter_cr.grid(sticky=tk.EW,
row=15,
column=1,
padx=self.xd,
pady=self.yd)
self.l_ter_cr_help = tk.Label(
self, fg="gray26", text=" years (float number, example: 2.5)")
self.l_ter_cr_help.grid(sticky=tk.W,
row=15,
column=2,
padx=self.xd,
pady=self.yd)
self.l_condition_ter = tk.Label(
self, text="Select nat. eng. MaxLifespan Condition: ")
self.l_condition_ter.grid(sticky=tk.W,
row=18,
column=0,
padx=self.xd,
pady=self.yd)
self.sb_condition_ter = tk.Scrollbar(self, orient=tk.VERTICAL)
self.sb_condition_ter.grid(sticky=tk.W,
row=18,
column=2,
padx=0,
pady=self.yd)
self.lb_condition_ter = tk.Listbox(
self,
height=3,
width=self.w_lb,
yscrollcommand=self.sb_condition_ter.set)
self.lb_condition_ter.grid(sticky=tk.EW,
row=18,
column=1,
padx=self.xd,
pady=self.yd)
self.lb_condition_ter.insert(tk.END, "Validate Variables")
self.sb_condition_ter.config(command=self.lb_condition_ter.yview)
self.b_s30_def = tk.Button(self,
width=14,
bg="white",
text="Set stability drivers",
command=lambda: self.set_stab_vars())
self.b_s30_def.grid(sticky=tk.E,
row=18,
column=2,
padx=self.xd,
pady=self.yd * 2)
self.b_s30 = tk.Button(self,
text="Stabilize terrain",
command=lambda: self.start_app("s30"))
self.b_s30.grid(sticky=tk.EW,
row=20,
column=0,
columnspan=2,
padx=self.xd,
pady=self.yd)
self.b_s30["state"] = "disabled"
self.b_s30_help = tk.Button(self,
width=14,
fg="blue",
bg="white",
text="Info (help)",
command=lambda: self.help_info("s30"))
self.b_s30_help.grid(sticky=tk.E,
row=20,
column=2,
padx=self.xd,
pady=self.yd * 2)
self.l_placeholder3 = tk.Label(
self,
fg="white",
background="gray45",
text=" NET GAIN IN SEASONAL HABITAT AREA ")
self.l_placeholder3.grid(sticky=tk.EW,
row=21,
column=0,
columnspan=3,
padx=self.xd,
pady=self.yd * 2)
self.l_choose_fish = tk.Label(
self,
text=
"1) Select at least one fish species-lifestage (Physical Habitat)."
)
self.l_choose_fish.grid(sticky=tk.W,
row=22,
column=0,
columnspan=2,
padx=self.xd,
pady=self.yd)
self.b_show_fish = tk.Button(
self,
width=14,
background="white",
text="Show selected fish",
command=lambda: self.help_info("fish_selected"))
self.b_show_fish.grid(sticky=tk.E,
row=22,
column=2,
padx=self.xd,
pady=self.yd)
self.cb_cover_pre = tk.Checkbutton(
self,
text="Optional: Apply cover to pre-project",
variable=self.cover_app_pre,
onvalue=True,
offvalue=False)
self.cb_cover_pre.grid(sticky=tk.W,
row=23,
column=0,
padx=self.xd,
pady=self.yd)
self.cb_cover_pre.deselect()
self.cb_cover_post = tk.Checkbutton(
self,
text="Optional: Apply cover to post-project",
variable=self.cover_app_post,
onvalue=True,
offvalue=False)
self.cb_cover_post.grid(sticky=tk.W,
row=23,
column=1,
columnspan=2,
padx=self.xd,
pady=self.yd)
self.cb_cover_post.deselect()
# self.cb_apply_wua = tk.Checkbutton(self, text="Use WUA", variable=self.apply_wua, onvalue=True, offvalue=False)
# self.cb_apply_wua.grid(sticky=tk.E, row=23, column=2, padx=self.xd, pady=self.yd)
# self.cb_apply_wua.deselect()
self.l_condition_i = tk.Label(
self, text="2) Select pre-project condition (SHArC/SHArea): ")
self.l_condition_i.grid(sticky=tk.W,
row=25,
column=0,
padx=self.xd,
pady=self.yd)
self.sb_condition_i = tk.Scrollbar(self, orient=tk.VERTICAL)
self.sb_condition_i.grid(sticky=tk.W,
row=25,
column=2,
padx=0,
pady=self.yd)
self.lb_condition_i = tk.Listbox(
self,
height=3,
width=self.w_lb,
yscrollcommand=self.sb_condition_i.set)
self.lb_condition_i.grid(sticky=tk.EW,
row=25,
column=1,
padx=self.xd,
pady=self.yd)
self.lb_condition_i.insert(tk.END, "Validate Variables")
self.sb_condition_i.config(command=self.lb_condition_i.yview)
self.b_select_c_i = tk.Button(
self,
width=14,
background="white",
text="Confirm Selection",
command=lambda: self.select_condition("chsi_initial"))
self.b_select_c_i.grid(sticky=tk.E,
row=25,
column=2,
padx=self.xd,
pady=self.yd)
self.l_condition_p = tk.Label(
self, text="3) Select post-project condition (SHArC/SHArea): ")
self.l_condition_p.grid(sticky=tk.W,
row=28,
column=0,
padx=self.xd,
pady=self.yd)
self.sb_condition_p = tk.Scrollbar(self, orient=tk.VERTICAL)
self.sb_condition_p.grid(sticky=tk.W,
row=28,
column=2,
padx=0,
pady=self.yd)
self.lb_condition_p = tk.Listbox(
self,
height=3,
width=self.w_lb,
yscrollcommand=self.sb_condition_p.set)
self.lb_condition_p.grid(sticky=tk.EW,
row=28,
column=1,
padx=self.xd,
pady=self.yd)
self.lb_condition_p.insert(tk.END, "Validate Variables")
self.sb_condition_p.config(command=self.lb_condition_i.yview)
self.b_select_c_p = tk.Button(
self,
width=14,
background="white",
text="Confirm Selection",
command=lambda: self.select_condition("chsi_project"))
self.b_select_c_p.grid(sticky=tk.E,
row=28,
column=2,
padx=self.xd,
pady=self.yd)
self.b_s40 = tk.Button(
self,
text="Calculate Net gain in Seasonal Habitat Area (SHArea)",
command=lambda: self.start_app("s40"))
self.b_s40.grid(sticky=tk.EW,
row=30,
column=0,
columnspan=2,
padx=self.xd,
pady=self.yd)
self.b_s40["state"] = "disabled"
self.b_s40_help = tk.Button(self,
width=14,
fg="blue",
bg="white",
text="Info (help)",
command=lambda: self.help_info("s40"))
self.b_s40_help.grid(sticky=tk.E,
row=23,
column=2,
padx=self.xd,
pady=self.yd)
def create_cutscreen(self, gcodeDir, title):
tk.Button(master=self, text='Back',
command=lambda: self.create_main()).pack(side='top',
anchor='w')
self.w = tk.Label(self, text=title, font=("Helvetica", 36))
self.w.pack()
tk.Button(master=self,
text='Select All',
command=lambda: self.select_all()).pack(side='top',
anchor='center')
# Loop through files in given dir and create check boxes
directory = os.fsencode(gcodeDir)
self.checkboxes = []
self.zValues = []
for file in sorted(os.listdir(directory), key=alphanum_key):
filename = os.fsdecode(file)
if filename.endswith(
".gcode"
) and "_COMPILED_" not in filename and "000" not in filename:
fm = tk.Frame(self)
chkVar = tk.IntVar()
chkVar.set(0)
zVar = tk.DoubleVar()
zVar.set(' 0.000')
self.zValues.append((zVar, filename))
self.checkboxes.append((chkVar, filename))
zLabel = tk.Label(fm,
text=" 0.00",
textvariable=zVar,
font=("Courier", 14))
self.zLabels.append((zLabel, filename))
zLabel.pack(side="left", fill="x")
tk.Checkbutton(fm, text=filename,
variable=chkVar).pack(side="left")
tk.Button(fm,
text="+0.01",
bg="blue",
command=partial(self.changeZindexValue, 0.01,
filename)).pack(side="right")
tk.Button(fm,
text="+0.005",
bg="blue",
command=partial(self.changeZindexValue, 0.005,
filename)).pack(side="right")
tk.Button(fm,
text="-0.005",
bg="green",
command=partial(self.changeZindexValue, -0.005,
filename)).pack(side="right")
tk.Button(fm,
text="-0.01",
bg="green",
command=partial(self.changeZindexValue, -0.01,
filename)).pack(side="right")
fm.pack(fill="both", expand="yes", side="top")
tk.Button(master=self,
text='Generate GCode',
command=lambda: self.generateGcode(gcodeDir, title)).pack(
side='top', anchor='center')
self.quit = tk.Button(self,
text="QUIT",
fg="red",
command=root.destroy)
self.quit.pack(side="bottom")
def main():
"""Главная функция главного модуля.
Создаёт объекты графического дизайна библиотеки tkinter: окно, холст, фрейм с кнопками, кнопки.
"""
global physical_time
global displayed_time
global time_step
global time_speed
global space
global start_button
print('Modelling started!')
physical_time = 0
root = tkinter.Tk()
root.title("Kepler's laws of motion")
window_size = str(window_width) + "x" + str(window_height + 60)
root.geometry(window_size)
# космическое пространство отображается на холсте типа Canvas
space = tkinter.Canvas(root,
width=window_width,
height=window_height,
bg="black")
space.pack(side=tkinter.TOP)
# нижняя панель с кнопками
frame = tkinter.Frame(root)
frame.pack(side=tkinter.BOTTOM)
start_button = tkinter.Button(frame,
text="Start",
command=start_execution,
width=6)
start_button.pack(side=tkinter.LEFT)
time_step = tkinter.DoubleVar()
time_step.set(1)
time_step_entry = tkinter.Entry(frame, textvariable=time_step)
time_step_entry.pack(side=tkinter.LEFT)
time_speed = tkinter.DoubleVar()
scale = tkinter.Scale(frame,
variable=time_speed,
orient=tkinter.HORIZONTAL)
scale.pack(side=tkinter.LEFT)
load_file_button = tkinter.Button(frame,
text="Open file...",
command=open_file_dialog)
load_file_button.pack(side=tkinter.LEFT)
save_file_button = tkinter.Button(frame,
text="Save to file...",
command=save_file_dialog)
save_file_button.pack(side=tkinter.LEFT)
open_diagram_button = tkinter.Button(frame,
text="View stats",
command=open_diagram)
open_diagram_button.pack(side=tkinter.LEFT)
displayed_time = tkinter.StringVar()
displayed_time.set(str(physical_time) + " seconds gone")
time_label = tkinter.Label(frame, textvariable=displayed_time, width=30)
time_label.pack(side=tkinter.RIGHT)
root.mainloop()
print('Modelling finished!')
def __init__(self, parent, controller):
tk.Frame.__init__(self, parent)
# #object is label, bg background, fg foreground
# #input labels
ilabel1 = tk.Label(self, text="Exhaust Velocity (m/s)",
fg="black").grid(row=4, sticky="e")
ilabel2 = tk.Label(self, text="Launch Alitutde (m)",
fg="black").grid(row=5, sticky="e")
ilabel3 = tk.Label(self, text="Target Alitutde (m)",
fg="black").grid(row=6, sticky="e")
ilabel4 = tk.Label(self, text="Estimate burn time (s)",
fg="black").grid(row=7, sticky="e")
ilabel5 = tk.Label(self, text="Empty mass target (kg)",
fg="black").grid(row=8, sticky="e")
ilabel6 = tk.Label(self,
text="Start nozzle flow rate (kg/s)",
fg="black").grid(row=9, sticky="e")
# #output labels
olabel1 = tk.Label(self,
text="Specific gravitational potential (kJ)").grid(
row=11, sticky="e")
olabel2 = tk.Label(self, text="Velocity (m/s)").grid(row=12,
sticky="e")
olabel3 = tk.Label(self, text="Gravity loss (m/s)").grid(row=13,
sticky="e")
olabel4 = tk.Label(self, text="Drag loss (m/s)").grid(row=14,
sticky="e")
olabel5 = tk.Label(self, text="Total velocity (m/s)").grid(row=15,
sticky="e")
olabel6 = tk.Label(self, text="Mass ratio").grid(row=16, sticky="e")
olabel7 = tk.Label(self, text="Propellant mass (kg)").grid(row=17,
sticky="e")
olabel8 = tk.Label(self, text="Total mass (kg)").grid(row=18,
sticky="e")
olabel9 = tk.Label(self,
text="Start propellant mass (kg)").grid(row=19,
sticky="e")
olabel10 = tk.Label(self,
text="Final vapour mass (kg)").grid(row=20,
sticky="e")
olabel11 = tk.Label(self, text="Liquid burn time (s)").grid(row=21,
sticky="e")
global exvel
global lalt
global talt
global tb
global emt
global snfr
exvel = tk.DoubleVar()
lalt = tk.DoubleVar()
talt = tk.DoubleVar()
tb = tk.DoubleVar()
emt = tk.DoubleVar()
snfr = tk.DoubleVar()
self.entry1 = tk.Entry(self, textvariable=exvel)
self.entry1.grid(row=4, column=1)
self.entry2 = tk.Entry(self, textvariable=lalt)
self.entry2.grid(row=5, column=1)
self.entry3 = tk.Entry(self, textvariable=talt)
self.entry3.grid(row=6, column=1)
self.entry4 = tk.Entry(self, textvariable=tb)
self.entry4.grid(row=7, column=1)
self.entry5 = tk.Entry(self, textvariable=emt)
self.entry5.grid(row=8, column=1)
self.entry6 = tk.Entry(self, textvariable=snfr)
self.entry6.grid(row=9, column=1)
button1 = ttk.Button(self,
text="Calculate",
command=self.initial_estimates1).grid(row=10,
column=0)
def populate_portfolio(self):
'''
Get all symbol info from Binance needed to
populate user portfolio data and execute trades
'''
self.coins = self.coins_base
self.portfolio.delete(*self.portfolio.get_children())
exchange_coins = []
trade_currency = self.trade_currency
self.trade_coin = trade_currency
#update the GUI context
self.key_label.destroy()
self.key_entry.destroy()
self.secret_label.destroy()
self.secret_entry.destroy()
self.login.destroy()
updatetext = tk.StringVar()
updatetext.set('Initializing')
self.progresslabel = tk.Label(self.controls_view,
textvariable=updatetext)
self.progresslabel.grid(row=1,
column=0,
columnspan=4,
sticky=tk.E + tk.W)
progress_var = tk.DoubleVar()
progress = 0
progress_var.set(progress)
self.progressbar = tkinter.ttk.Progressbar(self.controls_view,
variable=progress_var,
maximum=len(self.coins))
self.progressbar.grid(row=0,
column=0,
columnspan=4,
sticky=tk.E + tk.W)
for coin in self.coins['coin']:
self.progressbar.update()
progress += 1
progress_var.set(progress)
updatetext.set('Fetching {0} account information'.format(coin))
self.progresslabel.update()
pair = coin + trade_currency
balance = self.client.get_asset_balance(asset=coin)
if coin != trade_currency:
price = float(
self.client.get_symbol_ticker(symbol=pair)['price'])
symbolinfo = self.client.get_symbol_info(
symbol=pair)['filters']
minvalue = float(symbolinfo[3]['minNotional'])
if self.min_trade_value is not None:
minvalue = self.min_trade_value
row = {
'coin': coin,
'exchange_balance': float(balance['free']),
'locked_balance': float(balance['locked']),
'minprice': float(symbolinfo[0]['minPrice']),
'maxprice': float(symbolinfo[0]['maxPrice']),
'ticksize': float(symbolinfo[0]['tickSize']),
'minqty': float(symbolinfo[2]['minQty']),
'maxqty': float(symbolinfo[2]['maxQty']),
'stepsize': float(symbolinfo[2]['stepSize']),
'minnotional': minvalue,
'symbol': pair,
'askprice': price,
'bidprice': price,
'price': price,
'last_placement': None,
'last_execution': None
}
else:
fixed_balance = self.coins.loc[self.coins['coin'] ==
coin]['fixed_balance']
row = {
'coin': coin,
'exchange_balance': float(balance['free']),
'locked_balance': float(balance['locked']),
'minprice': 0,
'maxprice': 0,
'ticksize': 0,
'minqty': 0,
'maxqty': 0,
'stepsize': 0,
'minnotional': 0,
'symbol': coin + coin,
'askprice': 1.0,
'bidprice': 1.0,
'price': 1.0,
'last_placement': None,
'last_execution': None
}
exchange_coins.append(row)
exchange_coins = pd.DataFrame(exchange_coins)
self.coins = pd.merge(self.coins,
exchange_coins,
on='coin',
how='outer')
self.coins['value'] = self.coins.apply(
lambda row: row.price * (row.exchange_balance + row.fixed_balance),
axis=1)
self.total = np.sum(self.coins['value'])
self.coins['actual'] = self.coins.apply(
lambda row: 100.0 * row.value / self.total, axis=1)
self.update_status()
i = 0
for row in self.coins.itertuples():
self.portfolio.insert(
'',
i,
iid=row.coin,
text=row.coin,
values=(row.fixed_balance, row.exchange_balance,
row.locked_balance, '{0} %'.format(row.allocation),
'{0:.2f} %'.format(row.actual),
round_decimal(row.price, row.ticksize),
round_decimal(row.price, row.ticksize), '', ''))
i += 1
updatetext.set('Testing connection'.format(coin))
self.dryrun()
self.progressbar.destroy()
self.progresslabel.destroy()
self.automate = tk.BooleanVar()
self.automate.set(False)
self.automate_text = tk.StringVar()
self.automate_text.set('Start Automation')
self.toggle_automate = tk.Button(
self.controls_view,
textvariable=self.automate_text,
command=lambda: self.automation(toggle=True))
self.toggle_automate.grid(row=0,
column=0,
rowspan=2,
columnspan=2,
sticky=tk.E + tk.W + tk.N + tk.S)
self.sell_button = tk.Button(self.controls_view,
text='Execute Sells',
command=self.execute_sells)
self.sell_button.grid(row=0,
column=2,
columnspan=2,
sticky=tk.E + tk.W)
self.buy_button = tk.Button(self.controls_view,
text='Execute Buys',
command=self.execute_buys)
self.buy_button.grid(row=1, column=2, columnspan=2, sticky=tk.E + tk.W)
def __init__(self, parent, controller):
tk.Frame.__init__(self, parent)
#geometry
ilabel1 = tk.Label(self, text="Geometry", fg="black").grid(row=4,
sticky="e")
ilabel2 = tk.Label(self,
text="Injector hole diameter (mm)",
fg="black").grid(row=5, sticky="e")
ilabel3 = tk.Label(
self,
text="Oxidiser/Fuel ratio",
fg="black",
).grid(row=6, sticky="e")
ilabel4 = tk.Label(self,
text="Tank pressure - Chamber pressure (Bar)",
fg="black").grid(row=7, sticky="e")
ilabel5 = tk.Label(self, text="Loss coefficient",
fg="black").grid(row=8, sticky="e")
ilabel6 = tk.Label(self,
text="Density of oxidiser (kg/m^3)",
fg="black").grid(row=9, sticky="e")
ilabel7 = tk.Label(self,
text="Mass flow rate oxidiser (kg/s)",
fg="black").grid(row=10, sticky="e")
#stress
ilabel9 = tk.Label(self, text="Stress Analysis",
fg="black").grid(row=12, sticky="e")
ilabel10 = tk.Label(self, text="Max pressure drop (Pa)",
fg="black").grid(row=13, sticky="e")
ilabel11 = tk.Label(self, text="Poisson Ratio",
fg="black").grid(row=14, sticky="e")
ilabel12 = tk.Label(self, text="Yield Stress (Pa)",
fg="black").grid(row=15, sticky="e")
ilabel13 = tk.Label(self, text="Radius of injector (m)",
fg="black").grid(row=16, sticky="e")
ilabel14 = tk.Label(self, text="Safety Factor",
fg="black").grid(row=17, sticky="e")
global ihd
global of
global tpcp
global lc
global doo
global mfrn
global mpd
global Pr
global Ys
global roi
global SF
ihd = tk.DoubleVar()
of = tk.DoubleVar()
tpcp = tk.DoubleVar()
lc = tk.DoubleVar()
doo = tk.DoubleVar()
mfrn = tk.DoubleVar()
mpd = tk.DoubleVar()
Pr = tk.DoubleVar()
Ys = tk.DoubleVar()
roi = tk.DoubleVar()
SF = tk.DoubleVar()
self.entry1 = tk.Entry(self, textvariable=ihd)
self.entry1.grid(row=5, column=1)
self.entry2 = tk.Entry(self, textvariable=of)
self.entry2.grid(row=6, column=1)
self.entry3 = tk.Entry(self, textvariable=tpcp)
self.entry3.grid(row=7, column=1)
self.entry4 = tk.Entry(self, textvariable=lc)
self.entry4.grid(row=8, column=1)
self.entry5 = tk.Entry(self, textvariable=doo)
self.entry5.grid(row=9, column=1)
self.entry6 = tk.Entry(self, textvariable=mfrn)
self.entry6.grid(row=10, column=1)
self.entry7 = tk.Entry(self, textvariable=mpd)
self.entry7.grid(row=13, column=1)
self.entry8 = tk.Entry(self, textvariable=Pr)
self.entry8.grid(row=14, column=1)
self.entry9 = tk.Entry(self, textvariable=Ys)
self.entry9.grid(row=15, column=1)
self.entry10 = tk.Entry(self, textvariable=roi)
self.entry10.grid(row=16, column=1)
self.entry11 = tk.Entry(self, textvariable=SF)
self.entry11.grid(row=17, column=1)
olabel1 = tk.Label(self, text="Area of orifice (m^2)").grid(row=5,
column=2,
sticky="e")
olabel2 = tk.Label(self, text="Number of orificies").grid(row=6,
column=2,
sticky="e")
olabel3 = tk.Label(self, text="Thickness (mm)").grid(row=13,
column=2,
sticky="e")
button1 = tk.Button(self, text="Calculate",
command=self.injectorcalc1).grid(row=11, column=0)
button2 = tk.Button(self,
text="Calculate",
command=self.injectorcalcstress1).grid(row=18,
column=0)
def init_gui(self):
"""
Setups all the parameters (and their values) needed by the GUI.
Includes window size, components, background, and more.
Args:
None
Returns:
None
"""
self.root.title('Arm Solutions')
self.root.geometry("1200x800")
self.background_image = Image.open("Flat_colorful_background.png")
self.background_image = self.background_image.resize((2000,2000), Image.ANTIALIAS)
self.background_image = ImageTk.PhotoImage(self.background_image)
self.label = tkinter.Label(self.root, image=self.background_image)
self.label.image = self.background_image
self.label.place(x=0,y=0, relwidth=1, relheight=1)
self.root.grid_columnconfigure(1, weight=1)
self.root.grid_columnconfigure(0, weight=1)
self.root.option_add('*tearOff', 'FALSE') # Disables ability to tear menu bar into own window
#
self.systemStatusLabelText = tkinter.StringVar()
self.systemStatusLabel = tkinter.Label(textvariable= self.systemStatusLabelText , bg = '#e81a1a', width = 25)
self.startup_button = tkinter.Button(self.root, text ="Start Up/Resume System", command = self.startSystem, height=3, width= 35, bg = '#499c5f')
self.pause_button = tkinter.Button(self.root, text ="Put System in Standby", command = self.pauseSystem, height=3, width= 35, bg ='#f9ff54')
self.settings_button = tkinter.Button(self.root, text ="System Settings", command = self.systemSettings, height=3, width= 35, bg = '#adaaaa')
self.exit_button = tkinter.Button(self.root, text ="Shut Down System", command = self.on_exit, height=3, width= 35, bg = '#e81a1a')
self.imageFrame = tkinter.Frame(self.root)
self.imageFrame.grid(row=0, column=1, padx=10, pady=50, rowspan=4)
self.startup_button.grid(row=0,column=0, padx=50, pady=(60,100))
self.pause_button.grid(row=1,column=0, padx=50, pady=(0,100))
self.settings_button.grid(row=2, column=0, padx=50, pady=(0,100))
self.exit_button.grid(row=3, column=0, padx=50)
self.systemStatusLabel.grid(row=3, column=1, pady=10, padx=240)
self.systemStatusLabel.config(font=("New Times Roman", 20))
self.startup_button.config(font=("New Times Roman", 16))
self.pause_button.config(font=("New Times Roman", 16))
self.settings_button.config(font=("New Times Roman", 16))
self.exit_button.config(font=("New Times Roman", 16))
# Menu Bar
self.menubar = Menubar(self.root)
# Padding
for child in self.winfo_children():
child.grid_configure(padx=10, pady=5)
self.lmain = tkinter.Label(self.imageFrame)
#Variables used later on
self.speed = tkinter.DoubleVar()
self.systemStatusLabelText.set("System Status - Offline")
def __init__(self, parent, controller):
tk.Frame.__init__(self, parent)
# label1=tk.Label(self,text="Combustion Chamber", font = LARGE_FONT)
# label1.grid(row=0,column=0)
ilabel1 = tk.Label(self,
text="Average regression rate (mm/s)",
fg="black").grid(row=0, sticky="e")
ilabel2 = tk.Label(self,
text="Vapour average regression rate (mm/s)",
fg="black").grid(row=1, sticky="e")
ilabel3 = tk.Label(
self,
text="Density of fuel (kg/m^3)",
fg="black",
).grid(row=2, sticky="e")
ilabel4 = tk.Label(
self,
text="Maximum Flux (kg/s/m^2)",
fg="black",
).grid(row=3, sticky="e")
global avg_rate
global vap_avg_rate
global fuel_density
global max_flux
avg_rate = tk.DoubleVar()
vap_avg_rate = tk.DoubleVar()
fuel_density = tk.DoubleVar()
max_flux = tk.DoubleVar()
self.entry1 = tk.Entry(self, textvariable=avg_rate)
self.entry1.grid(row=0, column=1)
self.entry2 = tk.Entry(self, textvariable=vap_avg_rate)
self.entry2.grid(row=1, column=1)
self.entry3 = tk.Entry(self, textvariable=fuel_density)
self.entry3.grid(row=2, column=1)
self.entry4 = tk.Entry(self, textvariable=max_flux)
self.entry4.grid(row=3, column=1)
button1 = tk.Button(self, text="Calculate",
command=self.portgeom1).grid(row=4, column=0)
olabel1 = tk.Label(self, text="Oxidiser mass (kg)").grid(row=5,
column=0,
sticky="e")
olabel2 = tk.Label(self, text="Fuel mass (kg)").grid(row=6,
column=0,
sticky="e")
olabel3 = tk.Label(self, text="End flow rate (kg/s)").grid(row=7,
column=0,
sticky="e")
olabel4 = tk.Label(self,
text="Initial port area (m^2)").grid(row=8,
column=0,
sticky="e")
olabel5 = tk.Label(self,
text="Initial port diameter (m)").grid(row=9,
column=0,
sticky="e")
olabel6 = tk.Label(self, text="Final liquid port diameter(mm)").grid(
row=10, column=0, sticky="e")
olabel7 = tk.Label(self,
text="Final port diameter(mm)").grid(row=11,
column=0,
sticky="e")
olabel8 = tk.Label(self,
text="Mid burn port diamater (mm)").grid(row=12,
column=0,
sticky="e")
olabel9 = tk.Label(self, text="Mid flow rate (kg/s)").grid(row=13,
column=0,
sticky="e")
olabel10 = tk.Label(self, text="Grain length (m)").grid(row=14,
column=0,
sticky="e")
olabel11 = tk.Label(self, text="Port length (m)").grid(row=15,
column=0,
sticky="e")
def setup_multicolor(self):
""" initial setup of multicolor options and variables"""
# Setup the options for multicolor
multicolormasterframe = tk.Frame(self.tab_configure)
channel_choices = sorted(list(self.data.keys()))
rgb = ['red', 'green', 'blue']
self.multicolorframes = {
color: tk.Frame(multicolormasterframe, bg=color)
for color in rgb
}
self.multicolorlabels = {
color: tk.Label(self.multicolorframes[color],
text=color,
bg=color,
width=10)
for color in rgb
}
self.multicolorvars = {color: tk.StringVar() for color in rgb}
self.multicolorpower = {color: tk.DoubleVar() for color in rgb}
self.multicolormin = {color: tk.DoubleVar() for color in rgb}
self.multicolormax = {color: tk.DoubleVar() for color in rgb}
self.multicolordropdowns = {
color: tk.OptionMenu(self.multicolorframes[color],
self.multicolorvars[color], *channel_choices)
for color in rgb
}
self.multicolorscales = {
color: tk.Scale(
self.multicolorframes[color],
variable=self.multicolorpower[color],
orient=tk.HORIZONTAL,
from_=self.config.ranges['multi_color_power_min'],
to_=self.config.ranges['multi_color_power_max'],
bg=color,
resolution=self.config.ranges['multi_color_power_resolution'],
length=200)
for color in rgb
}
self.multicolorminscale = {
color:
tk.Scale(self.multicolorframes[color],
variable=self.multicolormin[color],
orient=tk.HORIZONTAL,
from_=0,
to_=self.config.ranges['multi_color_vmin'],
bg=color,
resolution=self.config.ranges['multi_color_vresolution'],
length=200)
for color in rgb
}
self.multicolormaxscale = {
color:
tk.Scale(self.multicolorframes[color],
variable=self.multicolormax[color],
orient=tk.HORIZONTAL,
from_=self.config.ranges['multi_color_vmax'],
to_=100,
bg=color,
resolution=self.config.ranges['multi_color_vresolution'],
length=200)
for color in rgb
}
for color in rgb:
self.multicolorvars[color].set(
self.config.products_map[self.config.default[color]])
self.multicolorpower[color].set(self.config.default[color +
"_power"])
self.multicolormin[color].set(0)
self.multicolormax[color].set(100)
self.multicolordropdowns[color].config(bg=color, width=10)
self.multicolorlabels[color].pack(side=tk.LEFT)
self.multicolorscales[color].pack(side=tk.RIGHT)
self.multicolormaxscale[color].pack(side=tk.RIGHT)
self.multicolorminscale[color].pack(side=tk.RIGHT)
self.multicolordropdowns[color].pack()
self.multicolorframes[color].pack(fill=tk.BOTH)
multicolormasterframe.grid(row=1, column=0, columnspan=5, rowspan=3)
#===========================================================================
popup.protocol("WM_DELETE_WINDOW", on_closing)
popup.bind('<Escape>', lambda e: popup.destroy())
#===========================================================================
# Label text
#===========================================================================
plabletextstr = StringVar()
plabletextstr.set("")
tk.Label(popup, textvariable=plabletextstr).grid(row=0, column=0)
#===========================================================================
# Progress bar
#===========================================================================
progress = 0
progress_var = tk.DoubleVar()
progress_bar = ttk.Progressbar(popup,
variable=progress_var,
length=490,
maximum=100)
progress_bar.grid(row=1,
column=0) #.pack(fill=tk.X, expand=1, side=tk.BOTTOM)
progress_bar.place(x=5, y=25)
popup.pack_slaves()
#===========================================================================
# Read number of line 'data_generated.txt'
#===========================================================================
num_data_generated_lines = 0
num_data_generated_lines = sum(
1 for line in open(progress_bar_result_file_path))
def createWidgets(self):
# Tab Control introduced here --------------------------------------
tabControl = ttk.Notebook(self.win) # Create Tab Control
tab1 = ttk.Frame(tabControl) # Create a tab
tabControl.add(tab1, text='Tab 1') # Add the tab
tab2 = ttk.Frame(tabControl) # Add a second tab
tabControl.add(tab2, text='Tab 2') # Make second tab visible
tabControl.pack(expand=1, fill="both") # Pack to make visible
# ~ Tab Control introduced here -----------------------------------------
# We are creating a container frame to hold all other widgets
self.monty = ttk.LabelFrame(tab1, text=' Mighty Python ')
self.monty.grid(column=0, row=0, padx=8, pady=4)
# Changing our Label
ttk.Label(self.monty, text="Enter a name:").grid(column=0,
row=0,
sticky='W')
# Adding a Textbox Entry widget
self.name = tk.StringVar()
nameEntered = ttk.Entry(self.monty, width=12, textvariable=self.name)
nameEntered.grid(column=0, row=1, sticky='W')
# Adding a Button
self.action = ttk.Button(self.monty,
text="Click Me!",
command=self.clickMe)
self.action.grid(column=2, row=1)
ttk.Label(self.monty, text="Choose a number:").grid(column=1, row=0)
number = tk.StringVar()
numberChosen = ttk.Combobox(self.monty, width=12, textvariable=number)
numberChosen['values'] = (1, 2, 4, 42, 100)
numberChosen.grid(column=1, row=1)
numberChosen.current(0)
# Adding a Spinbox widget using a set of values
self.spin = Spinbox(self.monty,
values=(1, 2, 4, 42, 100),
width=5,
bd=8,
command=self._spin)
self.spin.grid(column=0, row=2)
# Using a scrolled Text control
scrolW = 30
scrolH = 3
self.scr = scrolledtext.ScrolledText(self.monty,
width=scrolW,
height=scrolH,
wrap=tk.WORD)
self.scr.grid(column=0, row=3, sticky='WE', columnspan=3)
#-------------------------------------------------------------------------
# Adding another Button
self.action = ttk.Button(self.monty,
text="Clear Text",
command=self.clearScrol)
self.action.grid(column=2, row=2)
# Adding more Feature Buttons
for idx in range(3):
b = ttk.Button(self.monty, text="Feature" + str(idx + 1))
b.grid(column=idx, row=4)
###########################
# Tab Control 2 refactoring -----------------------------------------
# We are creating a container frame to hold all other widgets -- Tab2
self.monty2 = ttk.LabelFrame(tab2, text=' Holy Grail ')
self.monty2.grid(column=0, row=0, padx=8, pady=4)
# Creating three checkbuttons
chVarDis = tk.IntVar()
check1 = tk.Checkbutton(self.monty2,
text="Disabled",
variable=chVarDis,
state='disabled')
check1.select()
check1.grid(column=0, row=0, sticky=tk.W)
self.chVarUn = tk.IntVar()
self.check2 = tk.Checkbutton(self.monty2,
text="UnChecked",
variable=self.chVarUn)
self.check2.deselect()
self.check2.grid(column=1, row=0, sticky=tk.W)
self.chVarEn = tk.IntVar()
self.check3 = tk.Checkbutton(self.monty2,
text="Toggle",
variable=self.chVarEn)
self.check3.deselect()
self.check3.grid(column=2, row=0, sticky=tk.W)
# trace the state of the two checkbuttons
self.chVarUn.trace(
'w', lambda unused0, unused1, unused2: self.checkCallback())
self.chVarEn.trace(
'w', lambda unused0, unused1, unused2: self.checkCallback())
# ~ Tab Control 2 refactoring -----------------------------------------
# Radiobutton list
colors = ["Blue", "Gold", "Red"]
self.radVar = tk.IntVar()
# Selecting a non-existing index value for radVar
self.radVar.set(99)
# Creating all three Radiobutton widgets within one loop
for col in range(3):
curRad = 'rad' + str(col)
curRad = tk.Radiobutton(self.monty2,
text=colors[col],
variable=self.radVar,
value=col,
command=self.radCall)
curRad.grid(column=col, row=6, sticky=tk.W, columnspan=3)
# And now adding tooltips
ToolTip(curRad, 'This is a Radiobutton control.')
# Create a container to hold labels
labelsFrame = ttk.LabelFrame(self.monty2, text=' Labels in a Frame ')
labelsFrame.grid(column=0, row=7)
# Place labels into the container element - vertically
ttk.Label(labelsFrame, text="Label1").grid(column=0, row=0)
ttk.Label(labelsFrame, text="Label2").grid(column=0, row=1)
# Add some space around each label
for child in labelsFrame.winfo_children():
child.grid_configure(padx=8)
# Creating a Menu Bar
menuBar = Menu(tab1)
self.win.config(menu=menuBar)
# Add menu items
fileMenu = Menu(menuBar, tearoff=0)
fileMenu.add_command(label="New")
fileMenu.add_separator()
fileMenu.add_command(label="Exit", command=self._quit)
menuBar.add_cascade(label="File", menu=fileMenu)
# Add another Menu to the Menu Bar and an item
helpMenu = Menu(menuBar, tearoff=0)
helpMenu.add_command(label="About")
menuBar.add_cascade(label="Help", menu=helpMenu)
# Change the main windows icon
self.win.iconbitmap('pyc.ico')
# Using tkinter Variable Classes
strData = tk.StringVar()
strData.set('Hello StringVar')
print(strData.get())
# Default tkinter Variable Classes
intData = tk.IntVar()
print(intData.get())
print(tk.DoubleVar())
print(tk.BooleanVar())
# It is not necessary to create a tk.StringVar()
strData = tk.StringVar()
strData = self.spin.get()
print("Hello " + strData)
# Printing the Global works
print(GLOBAL_CONST)
# call method
self.usingGlobal()
# Place cursor into name Entry
nameEntered.focus()
# Add a Tooltip to the Spinbox
ToolTip(self.spin, 'This is a Spin control.')
# Add Tooltips to more widgets
ToolTip(nameEntered, 'This is an Entry control.')
ToolTip(self.action, 'This is a Button control.')
ToolTip(self.scr, 'This is a ScrolledText control.')
def __init__(self):
tk.Toplevel.__init__(self)
self.title('Data Augmentation')
self.layout = {
'global': {
'start': {
'x': 15,
'y': 20
},
'space': {
'x': 15,
'y': 25
},
'tiny_space': {
'x': 5,
'y': 10
}
}
}
self.data_augmentation_entity = None
self.window_width = 750
self.window_height = 220
self.layout_utils = LayoutGUI(self.layout, self.window_width)
screenwidth = self.winfo_screenwidth()
screenheight = self.winfo_screenheight()
size = '%dx%d+%d+%d' % (self.window_width, self.window_height,
(screenwidth - self.window_width) / 2,
(screenheight - self.window_height) / 2)
self.geometry(size)
# ============================= Group 4 =====================================
self.label_frame_augmentation = ttk.Labelframe(
self, text='Data Augmentation')
self.label_frame_augmentation.place(
x=self.layout['global']['start']['x'],
y=self.layout['global']['start']['y'],
width=725,
height=150)
# 二值化 - 标签
self.binaryzation_text = ttk.Label(self,
text='Binaryzation',
anchor=tk.W)
self.layout_utils.inside_widget(
src=self.binaryzation_text,
target=self.label_frame_augmentation,
width=72,
height=20,
)
# 二值化 - 输入框
self.binaryzation_val = tk.StringVar()
self.binaryzation_val.set(-1)
self.binaryzation_entry = ttk.Entry(self,
textvariable=self.binaryzation_val,
justify=tk.LEFT)
self.layout_utils.next_to_widget(src=self.binaryzation_entry,
target=self.binaryzation_text,
width=55,
height=20,
tiny_space=True)
# 滤波 - 标签
self.median_blur_text = ttk.Label(self,
text='Median Blur',
anchor=tk.W)
self.layout_utils.next_to_widget(src=self.median_blur_text,
target=self.binaryzation_entry,
width=80,
height=20,
tiny_space=False)
# 滤波 - 输入框
self.median_blur_val = tk.IntVar()
self.median_blur_val.set(-1)
self.median_blur_entry = ttk.Entry(self,
textvariable=self.median_blur_val,
justify=tk.LEFT)
self.layout_utils.next_to_widget(src=self.median_blur_entry,
target=self.median_blur_text,
width=52,
height=20,
tiny_space=True)
# 高斯模糊 - 标签
self.gaussian_blur_text = ttk.Label(self,
text='Gaussian Blur',
anchor=tk.W)
self.layout_utils.next_to_widget(src=self.gaussian_blur_text,
target=self.median_blur_entry,
width=85,
height=20,
tiny_space=False)
# 高斯模糊 - 输入框
self.gaussian_blur_val = tk.IntVar()
self.gaussian_blur_val.set(-1)
self.gaussian_blur_entry = ttk.Entry(
self, textvariable=self.gaussian_blur_val, justify=tk.LEFT)
self.layout_utils.next_to_widget(src=self.gaussian_blur_entry,
target=self.gaussian_blur_text,
width=62,
height=20,
tiny_space=True)
# 椒盐噪声 - 标签
self.sp_noise_text = ttk.Label(self,
text='Pepper Noise (0-1)',
anchor=tk.W)
self.layout_utils.next_to_widget(src=self.sp_noise_text,
target=self.gaussian_blur_entry,
width=110,
height=20,
tiny_space=False)
# 椒盐噪声 - 输入框
self.sp_noise_val = tk.DoubleVar()
self.sp_noise_val.set(-1)
self.sp_noise_entry = ttk.Entry(self,
textvariable=self.sp_noise_val,
justify=tk.LEFT)
self.layout_utils.next_to_widget(src=self.sp_noise_entry,
target=self.sp_noise_text,
width=71,
height=20,
tiny_space=True)
# 旋转 - 标签
self.rotate_text = ttk.Label(self, text='Rotate (0-90)', anchor=tk.W)
self.layout_utils.below_widget(src=self.rotate_text,
target=self.binaryzation_text,
width=72,
height=20,
tiny_space=True)
# 旋转 - 输入框
self.rotate_val = tk.IntVar()
self.rotate_val.set(-1)
self.rotate_entry = ttk.Entry(self,
textvariable=self.rotate_val,
justify=tk.LEFT)
self.layout_utils.next_to_widget(src=self.rotate_entry,
target=self.rotate_text,
width=55,
height=20,
tiny_space=True)
# 随机空白边缘 - 标签
self.random_blank_text = ttk.Label(self,
text='Blank Border',
anchor=tk.W)
self.layout_utils.next_to_widget(src=self.random_blank_text,
target=self.rotate_entry,
width=72,
height=20,
tiny_space=False)
# 随机空白边缘 - 输入框
self.random_blank_val = tk.IntVar()
self.random_blank_val.set(-1)
self.random_blank_entry = ttk.Entry(self,
textvariable=self.random_blank_val,
justify=tk.LEFT)
self.layout_utils.next_to_widget(src=self.random_blank_entry,
target=self.random_blank_text,
width=55,
height=20,
tiny_space=True)
# 随机边缘位移 - 标签
self.random_transition_text = ttk.Label(self,
text='Transition',
anchor=tk.W)
self.layout_utils.next_to_widget(src=self.random_transition_text,
target=self.random_blank_entry,
width=60,
height=20,
tiny_space=False)
# 随机边缘位移 - 输入框
self.random_transition_val = tk.IntVar()
self.random_transition_val.set(-1)
self.random_transition_entry = ttk.Entry(
self, textvariable=self.random_transition_val, justify=tk.LEFT)
self.layout_utils.next_to_widget(src=self.random_transition_entry,
target=self.random_transition_text,
width=55,
height=20,
tiny_space=True)
# 透视变换 - 多选框
self.warp_perspective_val = tk.IntVar()
self.warp_perspective_val.set(0)
self.warp_perspective = ttk.Checkbutton(
self,
text='Distortion',
variable=self.warp_perspective_val,
onvalue=1,
offvalue=0)
self.layout_utils.below_widget(src=self.warp_perspective,
target=self.rotate_text,
width=80,
height=20,
tiny_space=False)
# 直方图均衡化 - 多选框
self.equalize_hist_val = tk.IntVar()
self.equalize_hist_val.set(0)
self.equalize_hist = ttk.Checkbutton(self,
text='EqualizeHist',
variable=self.equalize_hist_val,
offvalue=0)
self.layout_utils.next_to_widget(src=self.equalize_hist,
target=self.warp_perspective,
width=100,
height=20,
tiny_space=True)
# 拉普拉斯 - 多选框
self.laplace_val = tk.IntVar()
self.laplace_val.set(0)
self.laplace = ttk.Checkbutton(self,
text='Laplace',
variable=self.laplace_val,
onvalue=1,
offvalue=0)
self.layout_utils.next_to_widget(src=self.laplace,
target=self.equalize_hist,
width=64,
height=20,
tiny_space=True)
# 随机亮度 - 多选框
self.brightness_val = tk.IntVar()
self.brightness_val.set(0)
self.brightness = ttk.Checkbutton(self,
text='Brightness',
variable=self.brightness_val,
offvalue=0)
self.layout_utils.next_to_widget(src=self.brightness,
target=self.laplace,
width=80,
height=20,
tiny_space=True)
# 随机饱和度 - 多选框
self.saturation_val = tk.IntVar()
self.saturation_val.set(0)
self.saturation = ttk.Checkbutton(self,
text='Saturation',
variable=self.saturation_val,
offvalue=0)
self.layout_utils.next_to_widget(src=self.saturation,
target=self.brightness,
width=80,
height=20,
tiny_space=True)
# 随机色相 - 多选框
self.hue_val = tk.IntVar()
self.hue_val.set(0)
self.hue = ttk.Checkbutton(self,
text='Hue',
variable=self.hue_val,
offvalue=0)
self.layout_utils.next_to_widget(src=self.hue,
target=self.saturation,
width=50,
height=20,
tiny_space=True)
# 随机Gamma - 多选框
self.gamma_val = tk.IntVar()
self.gamma_val.set(0)
self.gamma = ttk.Checkbutton(self,
text='Gamma',
variable=self.gamma_val,
offvalue=0)
self.layout_utils.next_to_widget(src=self.gamma,
target=self.hue,
width=80,
height=20,
tiny_space=True)
# 随机通道 - 多选框
self.channel_swap_val = tk.IntVar()
self.channel_swap_val.set(0)
self.channel_swap = ttk.Checkbutton(self,
text='Channel Swap',
variable=self.channel_swap_val,
offvalue=0)
self.layout_utils.next_to_widget(src=self.channel_swap,
target=self.gamma,
width=100,
height=20,
tiny_space=True)
# 保存 - 按钮
self.btn_save = ttk.Button(self,
text='Save Configuration',
command=lambda: self.save_conf())
self.layout_utils.widget_from_right(
src=self.btn_save,
target=self.label_frame_augmentation,
width=120,
height=24,
tiny_space=True)
def create_widgets(self):
'''
Widget描画用処理
'''
#ラベルの描画
#ラベル表示するテキストを設定 font(フォント名/サイズ/太文字),fg:文字色,bg:背景色
self.label1 = tk.Label(self,text='Recipe Generation',font=("Helvetica", 20, "bold"),fg = "orange",bg = "white")
self.label1.grid(row=0,column =0,sticky=tk.W)
#キャンバスの描画 (Opencvで読み込んだ画像の表示)
image_bgr = cv2.imread("online_kitchen.png")
image_bgr = cv2.resize(image_bgr,(100,100)) # opencv画像をresize
image_rgb = cv2.cvtColor(image_bgr, cv2.COLOR_BGR2RGB) # imreadはBGRなのでRGBに変換
image_pil = Image.fromarray(image_rgb) # RGBをPILフォーマットに変換
self.image_tk = ImageTk.PhotoImage(image_pil) # ImageTkフォーマットへ変換
self.canvas = tk.Canvas(self, bg="grey", width=image_bgr.shape[0], height=image_bgr.shape[1])
self.canvas.create_image(0, 0, image=self.image_tk, anchor='nw') # ImageTk 画像配置
self.canvas.grid(row=1,column =0,columnspan=2,sticky=tk.W)
#ボタンの描画
self.button1 = tk.Button(self,text="Hello World",bg='#f0e68c',command=self.func_callback_button) #ボタン文字列・コールバック関数の設定
self.button1.grid(row=2,column =0,sticky=tk.W)
##http://infohost.nmt.edu/tcc/help/pubs/tkinter/web/anchors.html
# #テキストボックスの描画
# self.textbox1 = tk.Entry(self,width=20)
# self.textbox1.insert(tk.END,"default") #テキストボックス初期文字列の設定
# self.textbox1.grid(row=3,column =0,sticky=tk.W)
#チェックボタンの描画
# self.chval = tk.BooleanVar(False) #チェックボタン初期値設定
# self.chbox1 = tk.Checkbutton(self, text = 'check1', variable = self.chval) #チェックボタンテキスト/変数紐づけ設定
# self.chbox1.grid(row=4,column =0,sticky=tk.W)
#ラジオボタンの描画 (択一式)
# self.radval = tk.IntVar(0) #ラジオボタンテキスト/変数紐づけ設定
# self.radbut1 = tk.Radiobutton(self, text = 'radio0', variable = self.radval, value = 0) #ラジオボタンテキスト/変数紐づけ設定
# self.radbut1.grid(row=5,column =0,sticky=tk.W)
# self.radbut2 = tk.Radiobutton(self, text = 'radio1', variable = self.radval, value = 1) #ラジオボタンテキスト/変数紐づけ設定
# self.radbut2.grid(row=5,column =1,sticky=tk.W)
# ラベル表示するテキストを設定 font(フォント名/サイズ/太文字),fg:文字色,bg:背景色
self.label2 = tk.Label(self, text='甘味', font=("Helvetica", 10, "normal"), fg="black", bg="white")
self.label2.grid(row=3, column=0, sticky=tk.W)
#シークバーの表示
self.seekbarval1 = tk.DoubleVar() #シークバー変数設定
self.seekbarval1.trace("w", self.func_callback_seekbar) #シークバー変数変動時コールバック関数設定
self.sc = ttk.Scale(self,variable=self.seekbarval1,orient=tk.HORIZONTAL,from_=0,to=255) #シークバー描画
self.sc.grid(row=4, column=0,columnspan=2, sticky=(tk.N,tk.E,tk.S,tk.W))
# ラベル表示するテキストを設定 font(フォント名/サイズ/太文字),fg:文字色,bg:背景色
self.label3 = tk.Label(self, text='塩味', font=("Helvetica", 10, "normal"), fg="black", bg="white")
self.label3.grid(row=5, column=0, sticky=tk.W)
# シークバーの表示
self.seekbarval2 = tk.DoubleVar() # シークバー変数設定
self.seekbarval2.trace("w", self.func_callback_seekbar) # シークバー変数変動時コールバック関数設定
self.sc = ttk.Scale(self, variable=self.seekbarval2, orient=tk.HORIZONTAL, from_=0, to=255) # シークバー描画
self.sc.grid(row=6, column=0, columnspan=2, sticky=(tk.N, tk.E, tk.S, tk.W))
# ラベル表示するテキストを設定 font(フォント名/サイズ/太文字),fg:文字色,bg:背景色
self.label4 = tk.Label(self, text='酸味', font=("Helvetica", 10, "normal"), fg="black", bg="white")
self.label4.grid(row=7, column=0, sticky=tk.W)
# シークバーの表示
self.seekbarval3 = tk.DoubleVar() # シークバー変数設定
self.seekbarval3.trace("w", self.func_callback_seekbar) # シークバー変数変動時コールバック関数設定
self.sc = ttk.Scale(self, variable=self.seekbarval3, orient=tk.HORIZONTAL, from_=0, to=255) # シークバー描画
self.sc.grid(row=8, column=0, columnspan=2, sticky=(tk.N, tk.E, tk.S, tk.W))
# ラベル表示するテキストを設定 font(フォント名/サイズ/太文字),fg:文字色,bg:背景色
self.label5 = tk.Label(self, text='苦味', font=("Helvetica", 10, "normal"), fg="black", bg="white")
self.label5.grid(row=9, column=0, sticky=tk.W)
# シークバーの表示
self.seekbarval4 = tk.DoubleVar() # シークバー変数設定
self.seekbarval4.trace("w", self.func_callback_seekbar) # シークバー変数変動時コールバック関数設定
self.sc = ttk.Scale(self, variable=self.seekbarval4, orient=tk.HORIZONTAL, from_=0, to=255) # シークバー描画
self.sc.grid(row=10, column=0, columnspan=2, sticky=(tk.N, tk.E, tk.S, tk.W))
# ラベル表示するテキストを設定 font(フォント名/サイズ/太文字),fg:文字色,bg:背景色
self.label6 = tk.Label(self, text='旨味', font=("Helvetica", 10, "normal"), fg="black", bg="white")
self.label6.grid(row=11, column=0, sticky=tk.W)
# シークバーの表示
self.seekbarval5 = tk.DoubleVar() # シークバー変数設定
self.seekbarval5.trace("w", self.func_callback_seekbar) # シークバー変数変動時コールバック関数設定
self.sc = ttk.Scale(self, variable=self.seekbarval5, orient=tk.HORIZONTAL, from_=0, to=255) # シークバー描画
self.sc.grid(row=12, column=0, columnspan=2, sticky=(tk.N, tk.E, tk.S, tk.W))
def __init__(self, parent, fields, settings, callbacks, *args, **kwargs):
super().__init__(parent, *args, **kwargs)
self.settings = settings
self.callbacks = callbacks
# New for ch7
self.current_record = None
# A dict to keep track of input widgets
self.inputs = {}
# Build the form
self.record_label = ttk.Label()
self.record_label.grid(row=0, column=0)
# recordinfo section
recordinfo = tk.LabelFrame(self, text="Record Information")
# line 1
self.inputs['Date'] = w.LabelInput(
recordinfo, "Date",
field_spec=fields['Date']
)
self.inputs['Date'].grid(row=0, column=0)
self.inputs['Time'] = w.LabelInput(
recordinfo, "Time",
field_spec=fields['Time']
)
self.inputs['Time'].grid(row=0, column=1)
self.inputs['Technician'] = w.LabelInput(
recordinfo, "Technician",
field_spec=fields['Technician']
)
self.inputs['Technician'].grid(row=0, column=2)
# line 2
self.inputs['Lab'] = w.LabelInput(
recordinfo, "Lab",
field_spec=fields['Lab']
)
self.inputs['Lab'].grid(row=1, column=0)
self.inputs['Plot'] = w.LabelInput(
recordinfo, "Plot",
field_spec=fields['Plot']
)
self.inputs['Plot'].grid(row=1, column=1)
self.inputs['Seed sample'] = w.LabelInput(
recordinfo, "Seed sample",
field_spec=fields['Seed sample']
)
self.inputs['Seed sample'].grid(row=1, column=2)
recordinfo.grid(row=1, column=0, sticky="we")
# Environment Data
environmentinfo = tk.LabelFrame(self, text="Environment Data")
self.inputs['Humidity'] = w.LabelInput(
environmentinfo, "Humidity (g/m³)",
field_spec=fields['Humidity']
)
self.inputs['Humidity'].grid(row=0, column=0)
self.inputs['Light'] = w.LabelInput(
environmentinfo, "Light (klx)",
field_spec=fields['Light']
)
self.inputs['Light'].grid(row=0, column=1)
self.inputs['Temperature'] = w.LabelInput(
environmentinfo, "Temperature (°C)",
field_spec=fields['Temperature']
)
self.inputs['Temperature'].grid(row=0, column=2)
self.inputs['Equipment Fault'] = w.LabelInput(
environmentinfo, "Equipment Fault",
field_spec=fields['Equipment Fault']
)
self.inputs['Equipment Fault'].grid(row=1, column=0, columnspan=3)
environmentinfo.grid(row=2, column=0, sticky="we")
# Plant Data section
plantinfo = tk.LabelFrame(self, text="Plant Data")
self.inputs['Plants'] = w.LabelInput(
plantinfo, "Plants",
field_spec=fields['Plants']
)
self.inputs['Plants'].grid(row=0, column=0)
self.inputs['Blossoms'] = w.LabelInput(
plantinfo, "Blossoms",
field_spec=fields['Blossoms']
)
self.inputs['Blossoms'].grid(row=0, column=1)
self.inputs['Fruit'] = w.LabelInput(
plantinfo, "Fruit",
field_spec=fields['Fruit']
)
self.inputs['Fruit'].grid(row=0, column=2)
# Height data
# create variables to be updated for min/max height
# they can be referenced for min/max variables
min_height_var = tk.DoubleVar(value='-infinity')
max_height_var = tk.DoubleVar(value='infinity')
self.inputs['Min Height'] = w.LabelInput(
plantinfo, "Min Height (cm)",
field_spec=fields['Min Height'],
input_args={"max_var": max_height_var,
"focus_update_var": min_height_var}
)
self.inputs['Min Height'].grid(row=1, column=0)
self.inputs['Max Height'] = w.LabelInput(
plantinfo, "Max Height (cm)",
field_spec=fields['Max Height'],
input_args={"min_var": min_height_var,
"focus_update_var": max_height_var}
)
self.inputs['Max Height'].grid(row=1, column=1)
self.inputs['Median Height'] = w.LabelInput(
plantinfo, "Median Height (cm)",
field_spec=fields['Median Height'],
input_args={"min_var": min_height_var,
"max_var": max_height_var}
)
self.inputs['Median Height'].grid(row=1, column=2)
plantinfo.grid(row=3, column=0, sticky="we")
# Notes section
self.inputs['Notes'] = w.LabelInput(
self, "Notes",
field_spec=fields['Notes'],
input_args={"width": 75, "height": 10}
)
self.inputs['Notes'].grid(sticky="w", row=4, column=0)
# The save button
self.savebutton = ttk.Button(
self,
text="Save",
command=self.callbacks["on_save"])
self.savebutton.grid(sticky="e", row=5, padx=10)
# default the form
self.reset()
def __init__(self, reference):
super(Central, self).__init__()
# Saving reference to gui
self.reference = reference
# Setting up widgets
self.grid_columnconfigure(0, weight=1)
w = reference.width
h = reference.height
self.devices = tk.StringVar(self)
self.connection_state = tk.StringVar(self)
self.connection_state.set("Inactive")
self.b1t = tk.StringVar(self)
self.b1t.set("Connect")
self.b2t = tk.StringVar(self)
self.b2t.set("Upload")
self.mode = tk.StringVar(self)
self.mode.set("AOO")
self.l8t = tk.StringVar(self)
self.l8t.set("Atrium")
self.devices_list = []
self.devices_text = ['a']
print(self.devices_list)
self.f1 = tk.Frame(self, height=reference.height, width=250, bg="grey").place(x=0, y=0)
self.l1 = tk.Label(self, text="Pacemaker Menu").place(x=75, y=10)
self.l2 = tk.Label(self, text="Devices").place(x=15, y=44)
self.o1 = tk.OptionMenu(self, self.devices, *self.devices_text)
self.devices_refresh()
self.o1.place(anchor=tk.NE, x=235, y=40)
self.b1 = tk.Button(self, textvariable=self.b1t, command=self.device_button, state=tk.DISABLED, width=30)
self.b1.place(x=15, y=80)
self.devices.trace('w', self.device_select)
self.l3 = tk.Label(self, text="Connection Status").place(x=15, y=120)
self.l4 = tk.Label(self, textvariable=self.connection_state).place(anchor=tk.NE, x=235, y=120)
self.b2 = tk.Button(self, textvariable=self.b2t, command=self.device_upload, state=tk.DISABLED, width=30)
self.b2.place(x=15, y=180)
self.b3 = tk.Button(self, text="Refresh", command=self.devices_refresh, width=30)
self.b3.place(x=15, y=210)
self.l10 = tk.Label(self, text="Egram PlayBack").place(x=75, y=340)
self.b4 = tk.Button(self, text="Play", command=self.device_play, width=9, state=tk.DISABLED)
self.b4.place(x=15, y=370)
self.b5 = tk.Button(self, text="Stop", command=self.device_stop, width=9, state=tk.DISABLED)
self.b5.place(x=90, y=370)
self.b6 = tk.Button(self, text="Clear", command=self.device_clear, width=9, state=tk.DISABLED)
self.b6.place(x=165, y=370)
# Pacemaker parameters
self.t1 = tk.Label(self, text="Pacemaker Parameter").place(x=w/2+60, y=0)
self.o2 = tk.OptionMenu(self, self.mode, "AOO", "VOO", "AAI", "VVI", "DOO", "AOOR", "VOOR", "AAIR", "VVIR", "DOOR").place(x=265, y=40)
self.l7 = tk.Label(self, text="Affected Chamber: ").place(x=355, y=46)
self.l8 = tk.Label(self, textvariable=self.l8t).place(x=460, y=46)
self.mode.trace('w', self.mode_select)
rx = 265
ry = 76
rinc = 170
self.s1v = tk.DoubleVar()
self.s1 = tk.Scale(self, orient=tk.HORIZONTAL, variable=self.s1v, length=150, from_=0.1, to=1.9, resolution=0.1)
self.s1.place(x=rx, y=ry)
self.s1v.set(0.4)
self.s1t = tk.Label(self, text="Pulse Width (ms)").place(x=rx+20, y=ry+40)
rx += rinc
self.s2v = tk.DoubleVar()
self.s2 = tk.Scale(self, orient=tk.HORIZONTAL, variable=self.s2v, length=150, from_=500, to=7500, resolution=50)
self.s2.place(x=rx, y=ry)
self.s2v.set(3750)
self.s2t = tk.Label(self, text="Pulse Amplitude (mV)").place(x=rx+20, y=ry+40)
rx += rinc
self.s3v = tk.DoubleVar()
self.s3 = tk.Scale(self, orient=tk.HORIZONTAL, variable=self.s3v, length=150, from_=30, to=175, resolution=1)
self.s3.place(x=rx, y=ry)
self.s3v.set(60)
self.s3t = tk.Label(self, text="Lower Limit (ppm)").place(x=rx+20, y=ry+40)
self.s5v = tk.DoubleVar()
self.s5 = tk.Scale(self, orient=tk.HORIZONTAL, variable=self.s5v, length=150, from_=120, to=300, resolution=1)
self.s5.place(x=rx, y=ry+70)
self.s5v.set(200)
self.s5t = tk.Label(self, text="Upper Limit (ppm)").place(x=rx+20, y=ry+110)
rx += rinc
self.s4v = tk.DoubleVar()
self.s4 = tk.Scale(self, orient=tk.HORIZONTAL, variable=self.s4v, length=150, from_=150, to=500, resolution=5)
self.s4.place(x=rx, y=ry)
self.s4v.set(250)
self.s4t = tk.Label(self, text="Refractory Period (ms)").place(x=rx+20, y=ry+40)
# Create Graphs
canvasHeight = 300
canvasWidth = 500
self.c1 = Graph(reference=reference, canv_h=canvasHeight,canv_w=canvasWidth, name="Atrium EGram")
self.c1.place(x=-2, y=398)
self.c2 = Graph(reference=reference, canv_h=canvasHeight, canv_w=canvasWidth, name="Ventricle EGram")
self.c2.place(x=500, y=398)
self.reference.coms.set_atr_graph(self.c1)
self.reference.coms.set_vent_graph(self.c2)
self.pack(expand=1, fill=tk.BOTH)
def __init__(self, parent):
'''
Constructed function, initiate arguments and UI.
'''
super().__init__()
self.title('Settings')
self.parent = parent # the parent window
self.window_size = [100, 100]
self.stride = 25
self.geometry('450x250')
self.resizable(False, False)
# the "Scale" row
Scale_frame = tk.Frame(self)
Scale_frame.pack(fill="x")
tk.Label(Scale_frame,
text='Scale (200 for default) ：',
width=40,
font=('Times New Roman', 12)).pack(side=tk.LEFT)
self.Scale = tk.IntVar(value=200)
tk.Entry(Scale_frame, textvariable=self.Scale,
width=8).pack(side=tk.LEFT)
# the "Sigma" row
Sigma_frame = tk.Frame(self)
Sigma_frame.pack(fill="x")
tk.Label(Sigma_frame,
text='Sigma (0.6 for default) ：',
width=40,
font=('Times New Roman', 12)).pack(side=tk.LEFT)
self.Sigma = tk.DoubleVar(value=0.6)
tk.Entry(Sigma_frame, textvariable=self.Sigma,
width=8).pack(side=tk.LEFT)
# the "Min_size" row
Min_size_frame = tk.Frame(self)
Min_size_frame.pack(fill="x")
tk.Label(Min_size_frame,
text='Min_size (80 for default) ：',
width=40,
font=('Times New Roman', 12)).pack(side=tk.LEFT)
self.Min_size = tk.IntVar(value=80)
tk.Entry(Min_size_frame, textvariable=self.Min_size,
width=8).pack(side=tk.LEFT)
# the "Min_elongation" row
Min_elongation_frame = tk.Frame(self)
Min_elongation_frame.pack(fill="x")
tk.Label(Min_elongation_frame,
text='Min_elongation (0.5 for default) ：',
width=40,
font=('Times New Roman', 12)).pack(side=tk.LEFT)
self.Min_elongation = tk.DoubleVar(value=0.5)
tk.Entry(Min_elongation_frame,
textvariable=self.Min_elongation,
width=8).pack(side=tk.LEFT)
# the "Maximum_box" row
Maximum_box_frame = tk.Frame(self)
Maximum_box_frame.pack(fill="x")
tk.Label(Maximum_box_frame,
text='Maxsize of bounding box (10000 pixels for default) ：',
width=40,
font=('Times New Roman', 12)).pack(side=tk.LEFT)
self.Maximum_box = tk.IntVar(value=10000)
tk.Entry(Maximum_box_frame, textvariable=self.Maximum_box,
width=8).pack(side=tk.LEFT)
# the "Minimum_box" row
Minimum_box_frame = tk.Frame(self)
Minimum_box_frame.pack(fill="x")
tk.Label(Minimum_box_frame,
text='Minsize of bounding box (100 pixels for default) ：',
width=40,
font=('Times New Roman', 12)).pack(side=tk.LEFT)
self.Minimum_box = tk.IntVar(value=100)
tk.Entry(Minimum_box_frame, textvariable=self.Minimum_box,
width=8).pack(side=tk.LEFT)
# the button row
self.button_frame = tk.Frame(self)
self.button_frame.pack(fill="x", pady=10)
tk.Button(self.button_frame,
text="Cancel",
command=self.cancel,
relief='raised',
font=('Times New Roman', 12)).pack(side=tk.RIGHT, padx=20)
tk.Button(self.button_frame,
text="Confirm",
command=self.ok,
relief='raised',
font=('Times New Roman', 12)).pack(side=tk.LEFT, padx=20)
# the warning label
self.warning_label = tk.Label(
self,
text='Please input the desired windowsize',
width=45,
height=20,
font=('Times New Roman', 10))
self.warning_label.pack(pady=5, fill='x')
