def __init__(self, core_obj, opts=None):
Mprocessor.Processor.__init__(self, core_obj)
self.response = {"errs": [], "msg": []}
self.continue_running = False # True if we should leave command loop
self.cmd_instances = self._populate_commands()
# command name before alias or macro resolution
self.cmd_name = ""
# Current command getting run
self.current_command = ""
self.debug_nest = 1
self.display_mgr = Mdisplay.DisplayMgr()
self.intf = core_obj.debugger.intf
self.last_command = None # Initially a no-op
self.precmd_hooks = []
# If not:
# self.location = lambda : print_location(self)
self.preloop_hooks = []
self.postcmd_hooks = []
self._populate_cmd_lists()
# Stop only if line/file is different from last time
self.different_line = None
# These values updated on entry. Set initial values.
self.curframe = None
self.event = None
self.event_arg = None
self.frame = None
self.list_lineno = 0
# Create a custom safe Repr instance and increase its maxstring.
# The default of 30 truncates error messages too easily.
self._repr = Repr()
self._repr.maxstring = 100
self._repr.maxother = 60
self._repr.maxset = 10
self._repr.maxfrozen = 10
self._repr.array = 10
self._saferepr = self._repr.repr
self.stack = []
self.thread_name = None
self.frame_thread_name = None
return
def test_display(self):
mgr = Mdisplay.DisplayMgr()
self.assertEqual(mgr.list, [], "Initial list empty")
x = 1 # NOQA
frame = inspect.currentframe()
disp = mgr.add(frame, 'x > 1')
self.assertEqual(disp.__class__, Mdisplay.Display,
"mgr.add should return display")
self.assertEqual(len(mgr.list), 1, "display list with one item")
disp = mgr.add(frame, 'x')
self.assertEqual(disp.__class__, Mdisplay.Display,
"mgr.add should return another display")
self.assertEqual(len(mgr.list), 2, "display list with two items")
self.assertEqual(mgr.delete_index(1), True, "return True on ok delete")
self.assertEqual(mgr.delete_index(1), False,
"return False on no delete")
self.assertEqual(len(mgr.list), 1, "display list again with one item")
return
def __init__(self, core_obj, opts=None):
get_option = lambda key: \
Mmisc.option_set(opts, key, DEFAULT_PROC_OPTS)
Mprocessor.Processor.__init__(self, core_obj)
self.continue_running = False # True if we should leave command loop
self.event2short = dict(EVENT2SHORT)
self.event2short['signal'] = '?!'
self.event2short['brkpt'] = 'xx'
self.optional_modules = ('ipython', 'bpy')
self.cmd_instances = self._populate_commands()
# command argument string. Is like current_command, but the part
# after cmd_name has been removed.
self.cmd_argstr = ''
# command name before alias or macro resolution
self.cmd_name = ''
self.cmd_queue = [] # Queued debugger commands
self.completer = lambda text, state: \
Mcomplete.completer(self, text, state)
self.current_command = '' # Current command getting run
self.debug_nest = 1
self.display_mgr = Mdisplay.DisplayMgr()
self.intf = core_obj.debugger.intf
self.last_command = None # Initially a no-op
self.precmd_hooks = []
self.location = lambda: print_location(self)
self.preloop_hooks = []
self.postcmd_hooks = []
self._populate_cmd_lists()
self.prompt_str = '(trepan3k) '
# Stop only if line/file is different from last time
self.different_line = None
# These values updated on entry. Set initial values.
self.curframe = None
self.event = None
self.event_arg = None
self.frame = None
self.list_lineno = 0 # last list number used in "list"
self.list_filename = None # last filename used in list
self.macros = {} # Debugger Macros
# Create a custom safe Repr instance and increase its maxstring.
# The default of 30 truncates error messages too easily.
self._repr = Repr()
self._repr.maxstring = 100
self._repr.maxother = 60
self._repr.maxset = 10
self._repr.maxfrozen = 10
self._repr.array = 10
self.stack = []
self.thread_name = None
self.frame_thread_name = None
initfile_list = get_option('initfile_list')
for init_cmdfile in initfile_list:
self.queue_startfile(init_cmdfile)
return
def __init__(self, core_obj, opts=None):
get_option = lambda key: Mmisc.option_set(opts, key, DEFAULT_PROC_OPTS)
super().__init__(core_obj)
self.continue_running = False # True if we should leave command loop
self.event2short = dict(EVENT2SHORT)
self.event2short["signal"] = "?!"
self.event2short["brkpt"] = "xx"
self.optional_modules = ("ipython", "bpy")
self.cmd_instances = self._populate_commands()
# command argument string. Is like current_command, but the part
# after cmd_name has been removed.
self.cmd_argstr = ""
# command name before alias or macro resolution
self.cmd_name = ""
self.cmd_queue = [] # Queued debugger commands
self.completer = lambda text, state: Mcomplete.completer(
self, text, state)
self.current_command = "" # Current command getting run
self.debug_nest = 1
self.display_mgr = Mdisplay.DisplayMgr()
self.intf = core_obj.debugger.intf
self.last_command = None # Initially a no-op
self.precmd_hooks = []
self.location = lambda: print_location(self)
self.preloop_hooks = []
self.postcmd_hooks = []
self.remap_file_re = None
self._populate_cmd_lists()
# Note: prompt_str's value set below isn't used. It is
# computed dynamically. The value is suggestive of what it
# looks like.
self.prompt_str = "(trepan3k) "
# Stop only if line/file is different from last time
self.different_line = None
# These values updated on entry. Set initial values.
self.curframe = None
self.event = None
self.event_arg = None
self.frame = None
self.list_lineno = 0 # last list number used in "list"
self.list_offset = -1 # last list number used in "disassemble"
self.list_obj = None
self.list_filename = None # last filename used in list
self.list_orig_lineno = 0 # line number of frame or exception on setup
self.list_filename = None # filename of frame or exception on setup
self.macros = {} # Debugger Macros
# Create a custom safe Repr instance and increase its maxstring.
# The default of 30 truncates error messages too easily.
self._repr = Repr()
self._repr.maxstring = 100
self._repr.maxother = 60
self._repr.maxset = 10
self._repr.maxfrozen = 10
self._repr.array = 10
self.stack = []
self.thread_name = None
self.frame_thread_name = None
initfile_list = get_option("initfile_list")
for init_cmdfile in initfile_list:
self.queue_startfile(init_cmdfile)
return
def __init__(self, core_obj, opts=None):
super().__init__(core_obj, opts)
self.core = core_obj
self.debugger = core_obj.debugger
self.continue_running = False # True if we should leave command loop
self.event2short = dict(EVENT2SHORT)
self.event2short["signal"] = "?!"
self.event2short["brkpt"] = "xx"
self.optional_modules = ()
# command argument string. Is like current_command, but the part
# after cmd_name has been removed.
self.cmd_argstr = ""
# command name before alias or macro resolution
self.cmd_name = ""
self.cmd_queue = [] # Queued debugger commands
self.completer = lambda text, state: Mcomplete.completer(
self, text, state)
self.current_command = "" # Current command getting run
self.debug_nest = 1
self.display_mgr = Mdisplay.DisplayMgr()
self.intf = core_obj.debugger.intf
self.last_command = None # Initially a no-op
self.precmd_hooks = []
# FIXME: can we adjust this to also show the instruction?
self.location = lambda: self
self.preloop_hooks = []
self.postcmd_hooks = []
# Note: prompt_str's value set below isn't used. It is
# computed dynamically. The value is suggestive of what it
# looks like.
self.prompt_str = "(trepan-xpy) "
# Stop only if line/file is different from last time
self.different_line = None
# These values updated on entry. Set initial values.
self.curframe = None
self.event = None
self.event_arg = None
self.frame = None
self.list_lineno = 0 # last list number used in "list"
self.list_offset = -1 # last list number used in "disassemble"
self.list_obj = None
self.list_filename = None # last filename used in list
self.list_orig_lineno = 0 # line number of frame or exception on setup
self.list_filename = None # filename of frame or exception on setup
self.macros = {} # Debugger Macros
# Create a custom safe Repr instance and increase its maxstring.
# The default of 30 truncates error messages too easily.
self._repr = Repr()
self._repr.maxstring = 100
self._repr.maxother = 60
self._repr.maxset = 10
self._repr.maxfrozen = 10
self._repr.array = 10
self.stack = []
self.thread_name = None
self.frame_thread_name = None
get_option = lambda key: option_set(opts, key, DEFAULT_PROC_OPTS)
initfile_list = get_option("initfile_list")
for init_cmdfile in initfile_list:
self.queue_startfile(init_cmdfile)
# FIXME: This doesn't work
# # Delegate functions here:
# self.cmdproc = CommandProcessor(self)
# for method in (
# "_saferepr",
# "add_preloop_hook",
# "defaultFile",
# "eval",
# "exec_line",
# "forget",
# "get_an_int",
# "get_int_noerr",
# "getval",
# "ok_for_running",
# "process_commands",
# "queue_startfile",
# "remove_preloop_hook",
# "setup",
# "undefined_cmd",
# "read_history_file",
# "write_history_file",
# ):
# setattr(self, method, getattr(cmdproc, method))
# Remove trepan3k commands which aren't valid here, and those specific to trepan-xpy
remove_commands = (
"continue",
"finish",
"next",
"quit",
"set",
"step",
)
new_instances = []
for cmd in self.cmd_instances:
if cmd.name in remove_commands:
del self.commands[cmd.name]
else:
new_instances.append(cmd)
pass
pass
self.cmd_instances = new_instances
new_commands = self._update_commands()
for new_command in new_commands:
self.commands[new_command.name] = new_command
self.cmd_instances += new_commands
self._populate_cmd_lists()
if self.debugger.settings["autopc"]:
self.commands["set"].run(["set", "autopc"])
return
