Python filename Beispiele

Beispiel #1

Datei: tts_de.py Projekt: trigrass2/Remoter

# -*- coding: utf-8 -*-

# German language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE

systemSounds = []
sounds = []

for i in range(101):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
systemSounds.append(("tausend", filename(PROMPT_SYSTEM_BASE + 101)))
for i, s in enumerate([
        "comma", "und", "minus", "uhr", "minute", "minuten", "sekunde",
        "sekunden"
]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 102 + i)))
for i, s in enumerate([
        "", "Volt", "Ampere", "MilliAmpere", "Knoten", "Meter pro sekunde",
        "Fuesse pro sekunde", "kilometer pro stunde", "Meilen pro Stunde",
        "Meter", "Fuesse", "Grad", "Grad Fahrenheit", "Prozent",
        "Milliampere pro stunde", "Watt", "db", "R P M", "g", "Milliliter",
        "Unze", "Uhr", "Minuten", "Secunden"
]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 110 + i)))
for s, f, a in [
    (u"Sender ist inaktiv,bitte Ueberpruefen Sie", "inactiv", 486),
    (u"Senderakku niedrig", "lowbatt", 485),
    (u"Gaskanal nicht Null, bitte pruefen", "thralert", 481),
    (u"Schalten fehlpositioniert, bitte pruefen", "swalert", 482),
    (u"Das EEPROM ist fehlerhaft", "eebad", NO_ALTERNATE),

Beispiel #2

Datei: tts_fr.py Projekt: BenZoFly/opentx

# -*- coding: utf-8 -*-

# French language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE


systemSounds = []
sounds = []

for i in range(100):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
for i in range(10):
    systemSounds.append((str(100 * (i + 1)), filename(PROMPT_SYSTEM_BASE + 100 + i)))
for i, s in enumerate(["une", "onze", "vingt et une", "trente et une", "quarante et une", "cinquante et une", "soixante et une", "soixante et onze", "quatre vingt une"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 110 + i)))
for i, s in enumerate(["virgule", "et", "moins", "minuit", "midi"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 119 + i)))
for i, s in enumerate(["volts", u"ampères", u"milli ampères", u"knots", u"mètres seconde", u"pieds par seconde", u"kilomètre heure", u"miles par heure", u"mètres", "pieds", u"degrés", u"degrés fahrenheit", "pourcents", u"milli ampères / heure", "watt", "db", "tours minute", "g", u"degrés", "millilitres", "onces", "heure", "minute", "seconde"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 125 + i)))
# for i, s in enumerate(["timer", "", "tension", "tension", u"émission", u"réception", "altitude", "moteur",
#                        "essence", u"température", u"température", "vitesse", "distance", "altitude", u"élément lipo",
#                        "total lipo", "tension", "courant", "consommation", "puissance", u"accelération X", u"accelération Y", u"accelération Z",
#                        "orientation", "vario"]):
#     systemSounds.append((s, filename(PROMPT_SYSTEM_BASE+146+i)))
for i, s in enumerate(["virgule 0", "virgule 1", "virgule 2", "virgule 3", "virgule 4", "virgule 5", "virgule 6", "virgule 7", "virgule 8", "virgule 9"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 180 + i)))
for s, f, a in [(u"Trim centré", "midtrim", 495),
                (u"Trim maximum atteint", "endtrim", NO_ALTERNATE),
                (u"Batterie radio faible !", "lowbatt", 485),
                (u"Radio inactive !", "inactiv", 486),

Beispiel #3

Datei: tts_es.py Projekt: BenZoFly/opentx

# -*- coding: utf-8 -*-

# Spanish language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE


systemSounds = []
sounds = []

for i in range(101):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
systemSounds.append(("ciento", filename(PROMPT_SYSTEM_BASE + 101)))
systemSounds.append(("doscientos", filename(PROMPT_SYSTEM_BASE + 102)))
systemSounds.append(("trescientos", filename(PROMPT_SYSTEM_BASE + 103)))
systemSounds.append(("cuatrocientos", filename(PROMPT_SYSTEM_BASE + 104)))
systemSounds.append(("quinientos", filename(PROMPT_SYSTEM_BASE + 105)))
systemSounds.append(("sescientos", filename(PROMPT_SYSTEM_BASE + 106)))
systemSounds.append(("setecientos", filename(PROMPT_SYSTEM_BASE + 107)))
systemSounds.append(("ochocientos", filename(PROMPT_SYSTEM_BASE + 108)))
systemSounds.append(("nuevecientos", filename(PROMPT_SYSTEM_BASE + 109)))
systemSounds.append(("mil", filename(PROMPT_SYSTEM_BASE + 110)))
for i, s in enumerate(["coma", "un", "una", "y", "meno", "hora", "horas", "minuto", "minutos", "segundo", "segundos"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 111 + i)))
for i, s in enumerate([u"Voltio", u"ampério", u"metros por segundo", u"", u"kilómetro por hora", u"metros", u"grados", u"por ciento", u"miliamperios", u"miliamperios por hora", u"vatio", u"db", u"pés", u"nós", u"horas", u"minutos", u"segundos", u"RPM", u"g", u"mililitro", u"onzas"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 122 + i)))
for s, f, a in [(u"me tienes abandonada", "inactiv", 486),
                (u"batería del transmisor baja", "lowbatt", 485),
                (u"El acelerador está activado, por favor, corrijalo", "thralert", 481),
                (u"Los interruptores no están en la posición correcta, por favor corrijalo", "swalert", 482),
                (u"eeprom corrompida", "eebad", NO_ALTERNATE),

Beispiel #4

Datei: tts_de.py Projekt: BenZoFly/opentx

# -*- coding: utf-8 -*-

# German language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE


systemSounds = []
sounds = []

for i in range(101):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
systemSounds.append(("tausend", filename(PROMPT_SYSTEM_BASE + 101)))
for i, s in enumerate(["comma", "und", "minus", "uhr", "minute", "minuten", "sekunde", "sekunden"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 102 + i)))
for i, s in enumerate(["", "Volt", "Ampere", "MilliAmpere", "Knoten",
                       "Meter pro sekunde", "Fuesse pro sekunde",
                       "kilometer pro stunde", "Meilen pro Stunde", "Meter",
                       "Fuesse", "Grad", "Grad Fahrenheit", "Prozent",
                       "Milliampere pro stunde", "Watt", "db", "R P M", "g",
                       "Milliliter", "Unze", "Uhr", "Minuten", "Secunden"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 110 + i)))
for s, f, a in [(u"Sender ist inaktiv,bitte Ueberpruefen Sie", "inactiv", 486),
                (u"Senderakku niedrig", "lowbatt", 485),
                (u"Gaskanal nicht Null, bitte pruefen", "thralert", 481),
                (u"Schalten fehlpositioniert, bitte pruefen", "swalert", 482),
                (u"Das EEPROM ist fehlerhaft", "eebad", NO_ALTERNATE),
                (u"Das EEPROM ist immer formatiert", "eeformat", NO_ALTERNATE),
                (u"fehler", "error", NO_ALTERNATE),
                (u"Trim zentriert", "midtrim", 495),
                (u"Poti zentriert", "midpot", 496),

Beispiel #5

Datei: tts_it.py Projekt: trigrass2/Remoter

# -*- coding: utf-8 -*-

# Italian language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE


systemSounds = []
sounds = []

for i in range(101):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
systemSounds.append(("mila", filename(PROMPT_SYSTEM_BASE + 101)))
systemSounds.append(("mille", filename(PROMPT_SYSTEM_BASE + 102)))
for i, s in enumerate(["virgola", "un", "e", "meno", "ora", "ore", "minuto", "minuti", "secondo", "secondi"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 103 + i)))
for i, s in enumerate(["", "",
                       "volt", "volt",
                       "ampere", "ampere",
                       "milliampers", "milliampers",
                       "nodo", "nodi",
                       "metro al secondo", "metri al secondo",
                       "piede al secondo", "piedi al secondo",
                       "chilometro ora", "chilometri ora",
                       "miglio per ora", "miglia per ora",
                       "metro", "metri",
                       "piede", "piedi",
                       "grado celsius", "gradi celsius",
                       "grado fahrenheit", "gradi fahrenheit",
                       "percento", "percento",
                       "milliampere ora", "milliampere ora",

Beispiel #6

Datei: tts_es.py Projekt: trigrass2/Remoter

# -*- coding: utf-8 -*-

# Spanish language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE

systemSounds = []
sounds = []

for i in range(101):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
systemSounds.append(("ciento", filename(PROMPT_SYSTEM_BASE + 101)))
systemSounds.append(("doscientos", filename(PROMPT_SYSTEM_BASE + 102)))
systemSounds.append(("trescientos", filename(PROMPT_SYSTEM_BASE + 103)))
systemSounds.append(("cuatrocientos", filename(PROMPT_SYSTEM_BASE + 104)))
systemSounds.append(("quinientos", filename(PROMPT_SYSTEM_BASE + 105)))
systemSounds.append(("sescientos", filename(PROMPT_SYSTEM_BASE + 106)))
systemSounds.append(("setecientos", filename(PROMPT_SYSTEM_BASE + 107)))
systemSounds.append(("ochocientos", filename(PROMPT_SYSTEM_BASE + 108)))
systemSounds.append(("nuevecientos", filename(PROMPT_SYSTEM_BASE + 109)))
systemSounds.append(("mil", filename(PROMPT_SYSTEM_BASE + 110)))
for i, s in enumerate([
        "coma", "un", "una", "y", "meno", "hora", "horas", "minuto", "minutos",
        "segundo", "segundos"
]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 111 + i)))
for i, s in enumerate([
        u"Voltio", u"ampério", u"metros por segundo", u"",
        u"kilómetro por hora", u"metros", u"grados", u"por ciento",
        u"miliamperios", u"miliamperios por hora", u"vatio", u"db", u"pés",
        u"nós", u"horas", u"minutos", u"segundos", u"RPM", u"g", u"mililitro",

Beispiel #7

# -*- coding: utf-8 -*-

# French language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE

systemSounds = []
sounds = []

for i in range(100):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
for i in range(10):
    systemSounds.append(
        (str(100 * (i + 1)), filename(PROMPT_SYSTEM_BASE + 100 + i)))
for i, s in enumerate([
        "une", "onze", "vingt et une", "trente et une", "quarante et une",
        "cinquante et une", "soixante et une", "soixante et onze",
        "quatre vingt une"
]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 110 + i)))
for i, s in enumerate(["virgule", "et", "moins", "minuit", "midi"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 119 + i)))
for i, s in enumerate([
        "volts", u"ampères", u"milli ampères", u"knots", u"mètres seconde",
        u"pieds par seconde", u"kilomètre heure", u"miles par heure",
        u"mètres", "pieds", u"degrés", u"degrés fahrenheit", "pourcents",
        u"milli ampères / heure", "watt", "db", "tours minute", "g", u"degrés",
        "millilitres", "onces", "heure", "minute", "seconde"
]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 125 + i)))
# for i, s in enumerate(["timer", "", "tension", "tension", u"émission", u"réception", "altitude", "moteur",

Beispiel #8

Datei: tts_pt.py Projekt: BenZoFly/opentx

# -*- coding: utf-8 -*-

# Portuguese language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE


systemSounds = []
sounds = []

for i in range(101):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
systemSounds.append(("cento", filename(PROMPT_SYSTEM_BASE + 101)))
systemSounds.append(("duzentos", filename(PROMPT_SYSTEM_BASE + 102)))
systemSounds.append(("trezentos", filename(PROMPT_SYSTEM_BASE + 103)))
systemSounds.append(("quatrocentos", filename(PROMPT_SYSTEM_BASE + 104)))
systemSounds.append(("quinhentos", filename(PROMPT_SYSTEM_BASE + 105)))
systemSounds.append(("seiscentos", filename(PROMPT_SYSTEM_BASE + 106)))
systemSounds.append(("setecentos", filename(PROMPT_SYSTEM_BASE + 107)))
systemSounds.append(("oitocentos", filename(PROMPT_SYSTEM_BASE + 108)))
systemSounds.append(("novecentos", filename(PROMPT_SYSTEM_BASE + 109)))
systemSounds.append(("mil", filename(PROMPT_SYSTEM_BASE + 110)))
for i, s in enumerate(["virgula", "uma", "duas", "e", "menos", "hora", "horas", "minuto", "minutos", "segundo", "segundos"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 111 + i)))
for i, s in enumerate([u"Volt", u"ampére", u"metros por segundo", u"", u"quilômetros por hora", u"metros", u"graus", u"cento", u"miliamperes", u"miliamperes por hora", u"watt", u"db", u"pés", u"nós", u"horas", u"minutos", u"segundos", u"RPM", u"g", u"mililitri", u"onças"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 122 + i)))
for s, f, a in [(u"atenção, o rádio foi esquecido ligado, por favor desligue-o", "inactiv", 486),
                (u"bateria do rádio fraca", "lowbatt", 485),
                (u"atenção,acelerador não está no mínimo", "thralert", 481),
                (u"atenção, certifique-se que os interruptores estão na posição certa", "swalert", 482),
                (u"eeprom corrompida", "eebad", NO_ALTERNATE),

Beispiel #9

# -*- coding: utf-8 -*-

# Portuguese language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE

systemSounds = []
sounds = []

for i in range(101):
    systemSounds.append((str(i), filename(PROMPT_SYSTEM_BASE + i)))
systemSounds.append(("cento", filename(PROMPT_SYSTEM_BASE + 101)))
systemSounds.append(("duzentos", filename(PROMPT_SYSTEM_BASE + 102)))
systemSounds.append(("trezentos", filename(PROMPT_SYSTEM_BASE + 103)))
systemSounds.append(("quatrocentos", filename(PROMPT_SYSTEM_BASE + 104)))
systemSounds.append(("quinhentos", filename(PROMPT_SYSTEM_BASE + 105)))
systemSounds.append(("seiscentos", filename(PROMPT_SYSTEM_BASE + 106)))
systemSounds.append(("setecentos", filename(PROMPT_SYSTEM_BASE + 107)))
systemSounds.append(("oitocentos", filename(PROMPT_SYSTEM_BASE + 108)))
systemSounds.append(("novecentos", filename(PROMPT_SYSTEM_BASE + 109)))
systemSounds.append(("mil", filename(PROMPT_SYSTEM_BASE + 110)))
for i, s in enumerate([
        "virgula", "uma", "duas", "e", "menos", "hora", "horas", "minuto",
        "minutos", "segundo", "segundos"
]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 111 + i)))
for i, s in enumerate([
        u"Volt", u"ampére", u"metros por segundo", u"",
        u"quilômetros por hora", u"metros", u"graus", u"cento", u"miliamperes",
        u"miliamperes por hora", u"watt", u"db", u"pés", u"nós", u"horas",
        u"minutos", u"segundos", u"RPM", u"g", u"mililitri", u"onças"

Beispiel #10

Datei: tts_cz.py Projekt: BenZoFly/opentx

# -*- coding: utf-8 -*-

# Czech language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE


systemSounds = []
sounds = []

for i, s in enumerate(["nula", "jedna", "dva"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + i)))
for i in range(97):
    systemSounds.append((str(3 + i), filename(PROMPT_SYSTEM_BASE + 3 + i)))
for i, s in enumerate(["sto", u"dvěsta", u"třista", u"čtyřista", u"pětset", u"šestset", "sedmset", "osmset",
                       u"devětset", u"tisíc"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 100 + i)))
for i, s in enumerate([u"tisíce", "jeden", "jedno", u"dvě", u"celá", u"celé", u"celých", u"mínus"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 110 + i)))

for i, s in enumerate(["volt", "volty", u"voltů", "voltu",
                       u"ampér", u"ampéry", u"ampérů", u"ampéru",
                       u"miliampér", u"miliampéry", u"miliampérů", u"miliampéru",
                       u"uzel", u"uzly", u"uzlů", u"uzlu",
                       "metr za sekundu", "metry za sekundu", u"metrů za sekundu", "metru za sekundu",
                       "stopa za sekundu", "stopy za sekundu", "stop za sekundu", "stopy za sekundu",
                       "kilometr za hodinu", "kilometry za hodinu", u"kilometrů za hodinu", "kilometru za hodinu",
                       u"míle za hodinu", u"míle za hodinu", u"mil za hodinu", u"míle za hodinu",
                       "metr", "metry", u"metrů", "metru",
                       "stopa", "stopy", "stop", "stopy",
                       u"stupeň celsia", u"stupně celsia", u"stupňů celsia", u"stupně celsia",

Beispiel #11

# -*- coding: utf-8 -*-

# Czech language sounds configuration

from tts import filename, NO_ALTERNATE, PROMPT_SYSTEM_BASE, PROMPT_CUSTOM_BASE

systemSounds = []
sounds = []

for i, s in enumerate(["nula", "jedna", "dva"]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + i)))
for i in range(97):
    systemSounds.append((str(3 + i), filename(PROMPT_SYSTEM_BASE + 3 + i)))
for i, s in enumerate([
        "sto", u"dvěsta", u"třista", u"čtyřista", u"pětset", u"šestset",
        "sedmset", "osmset", u"devětset", u"tisíc"
]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 100 + i)))
for i, s in enumerate([
        u"tisíce", "jeden", "jedno", u"dvě", u"celá", u"celé", u"celých",
        u"mínus"
]):
    systemSounds.append((s, filename(PROMPT_SYSTEM_BASE + 110 + i)))

for i, s in enumerate([
        "volt",
        "volty",
        u"voltů",
        "voltu",
        u"ampér",
        u"ampéry",