def test_only_mode_control():
"""Unrealizable due to non-determinism.
Switched system with 2 modes: 'left', 'right'.
Modes are controlled by the system.
States are controlled by the environment.
So only control over dynamics is through mode switching.
Transitions are thus interpreted as non-deterministic.
This can model uncertain outcomes in the real world,
e.g., due to low quality actuators or
bad low-level feedback controllers.
"""
# Create a finite transition system
env_sws = transys.FTS()
env_sws.owner = 'env'
env_sws.sys_actions.add_from({'right', 'left'})
# str states
n = 4
states = transys.prepend_with(range(n), 's')
env_sws.atomic_propositions.add_from(['home', 'lot'])
# label TS with APs
ap_labels = [set(), set(), {'home'}, {'lot'}]
for i, label in enumerate(ap_labels):
state = 's' + str(i)
env_sws.states.add(state, ap=label)
# mode1 transitions
transmat1 = np.array([[0, 1, 0, 1], [0, 1, 0, 0], [0, 1, 0, 1],
[0, 0, 0, 1]])
env_sws.transitions.add_adj(sp.lil_matrix(transmat1), states,
{'sys_actions': 'right'})
# mode2 transitions
transmat2 = np.array([[1, 0, 0, 0], [1, 0, 1, 0], [0, 0, 1, 0],
[1, 0, 1, 0]])
env_sws.transitions.add_adj(sp.lil_matrix(transmat2), states,
{'sys_actions': 'left'})
env_vars = {'park'}
env_init = {'eloc = "s0"', 'park'}
env_prog = {'!park'}
env_safe = set()
sys_vars = {'X0reach'}
sys_init = {'X0reach'}
sys_prog = {'home'}
sys_safe = {'next(X0reach) <-> lot || (X0reach && !park)'}
sys_prog |= {'X0reach'}
specs = spec.GRSpec(env_vars, sys_vars, env_init, sys_init, env_safe,
sys_safe, env_prog, sys_prog)
r = synth.is_realizable('gr1c', specs, env=env_sws, ignore_env_init=True)
assert not r
def ppp2ts(part):
"""Derive transition system from proposition preserving partition.
@param part: labeled polytopic partition from
which to derive the transition system
@type part: L{PropPreservingPartition}
@return: C{(ts, state_map)}
finite transition system labeled with propositions
from the given partition, and map of
polytope indices to transition system states.
@rtype: (L{transys.FTS}, \C{dict})
"""
# generate transition system and add transitions
ofts = trs.FTS()
adj = part.adj #sp.lil_matrix
n = adj.shape[0]
ofts_states = range(n)
ofts_states = trs.prepend_with(ofts_states, 's')
ofts.states.add_from(ofts_states)
ofts.transitions.add_adj(adj, ofts_states)
# decorate TS with state labels
atomic_propositions = set(part.prop_regions)
ofts.atomic_propositions.add_from(atomic_propositions)
for state, region in zip(ofts_states, part.regions):
state_prop = region.props.copy()
ofts.states.add(state, ap=state_prop)
return (ofts, ofts_states)
def ts_test():
ts = trs.FTS()
ts.states.add('s0')
assert ('s0' in ts)
assert ('s0' in ts.node)
assert ('s0' in ts.states)
states = {'s0', 's1', 's2', 's3'}
ts.states.add_from(states)
assert (set(ts.states) == states)
ts.transitions.add('s0', 's1')
ts.transitions.add_from([('s1', 's2'), ('s2', 's3'), ('s3', 's0')])
ts.states.initial.add('s0')
ts.states.initial.add_from({'s0', 's1'})
ts.atomic_propositions.add('p')
assert (set(ts.atomic_propositions) == {'p'})
ts.states['s0']['ap'] = {'p'}
ts.states['s1']['ap'] = set()
ts.states['s2']['ap'] = set()
ts.states['s3']['ap'] = set()
assert (ts.states['s0']['ap'] == {'p'})
for state in {'s1', 's2', 's3'}:
assert (ts.states[state]['ap'] == set())
logger.debug(ts)
return ts
def label_per_state():
"""Add states with (possibly) different AP labels each.
"""
fts = trs.FTS()
fts.states.add_from(['s0', 's1'])
fts.atomic_propositions.add('p')
fts.states.add('s0', ap={'p'})
fts.states.add('s1', ap=None)
fts.plot()
def scipy_sparse_labeled_adj():
n = 10
A = lil_matrix((n, n))
A[0, :3] = rand(3)
adj2states = range(n)
print(A)
ofts = trs.FTS()
ofts.states.add_from(set(range(10)))
ofts.sys_actions.add('move')
ofts.env_actions.add('rain')
ofts.transitions.add_adj(A,
adj2states,
sys_actions='move',
env_actions='rain')
ofts.plot()
"""same thing as above, using A as a submatrix instead
"""
A = lil_matrix((3, 3))
A[0, :3] = rand(3)
adj2states = [0, 1, 2]
print(A)
ofts = trs.FTS()
ofts.states.add_from(set(range(10)))
ofts.sys_actions.add('move')
ofts.env_actions.add('rain')
ofts.transitions.add_adj(A,
adj2states,
sys_actions='move',
env_actions='rain')
ofts.plot()
return ofts
def multiple_env_actions_check(solver='omega'):
"""Two env players, 3 states controlled by sys.
sys wins marginally, due to assumption on
next combination of actions by env players.
"""
# 1 <---> 2
# 1 ---> 3
env_actions = [
{
'name': 'env_alice',
'values': transys.MathSet({'left', 'right'})
},
{
'name': 'env_bob',
'values': transys.MathSet({'bleft', 'bright'})
}
]
sys = transys.FTS(env_actions)
sys.states.add_from({'s1', 's2', 's3'})
sys.states.initial.add_from({'s1'})
sys.add_edge('s1', 's2', env_alice='left', env_bob='bright')
sys.add_edge('s2', 's1', env_alice='left', env_bob='bright')
# at state 3 sys loses
sys.add_edge('s1', 's3', env_alice='right', env_bob='bleft')
logging.debug(sys)
env_safe = {('(loc = "s1") -> X( (env_alice = "left") && '
'(env_bob = "bright") )')}
sys_prog = {'loc = "s1"', 'loc = "s2"'}
specs = spec.GRSpec(
env_safety=env_safe,
sys_prog=sys_prog,
moore=False,
plus_one=False,
qinit='\A \E')
r = synth.is_realizable(specs, sys=sys, solver=solver)
assert r
# slightly relax assumption
specs = spec.GRSpec(
sys_prog=sys_prog,
moore=False,
plus_one=False,
qinit='\A \E')
r = synth.is_realizable(specs, sys=sys, solver=solver)
assert not r
def env_ofts_bool_actions():
env = transys.FTS()
env.owner = 'env'
env.states.add_from({'e0', 'e1', 'e2'})
env.states.initial.add('e0')
env.env_actions.add_from({'park', 'go'})
env.sys_actions.add_from({'up', 'down'})
env.transitions.add('e0', 'e1', env_actions='park', sys_actions='up')
env.transitions.add('e1', 'e2', env_actions='go', sys_actions='down')
# env.plot()
return env
def sys_fts_2_states():
sys = transys.FTS()
sys.states.add_from(['X0', 'X1'])
sys.states.initial.add_from(['X0', 'X1'])
sys.transitions.add('X0', 'X1')
sys.transitions.add('X1', 'X0')
sys.transitions.add('X1', 'X1')
sys.atomic_propositions.add_from({'home', 'lot'})
sys.states.add('X0', ap={'home'})
sys.states.add('X1', ap={'lot'})
# sys.plot()
return sys
def env_fts_2_states():
env = transys.FTS()
env.owner = 'env'
env.states.add_from({'e0', 'e1'})
env.states.initial.add('e0')
# Park as an env action
env.env_actions.add_from({'park', 'go'})
env.transitions.add('e0', 'e0', env_actions='park')
env.transitions.add('e0', 'e0', env_actions='go')
# env.plot()
return env
def fts_minimal_example():
"""Small example, for more see the maximal example."""
fts = trs.FTS()
fts.states.add_from(['s0', 's1'])
fts.states.initial.add('s0')
fts.atomic_propositions.add_from({'green', 'not_green'})
fts.states.add('s0', ap={'not_green'})
fts.states.add('s1', ap={'green'})
fts.transitions.add('s0', 's1')
fts.transitions.add('s1', 's0')
if not fts.plot() and save_fig:
fts.save('small_fts.png')
return fts
def tulip_synthesis(self):
# call Tulip to synthesize a discrete controller
sys = transys.FTS()
sys.states.add_from(self.free_space.keys())
idx = self.determine_discrete_state()
sys.states.initial.add(idx)
for node in self.discrete_graph.edges.keys():
sys.transitions.add_comb(set([node]), set(self.discrete_graph.edges[node]))
sys.atomic_propositions.add_from(set(self.ap.keys()))
for state in self.label.keys():
sys.states.add(state,ap=set(self.label[state]))
ctrl = synth.synthesize(self.Tulip_spec, sys=sys)
if ctrl is None:
pdb.set_trace()
else:
dumpsmach.write_python_case("discrete_ctrl.py", ctrl, classname="symb_ctrl")
from discrete_ctrl import symb_ctrl
self.discrete_controller = symb_ctrl()
self.prior_discrete_graph = self.discrete_graph.copy()
self.prior_label = self.label.copy()
# between adjacent cells are allowed, which we model as a transition
# system in this example (it would also be possible to do this via a
# formula)
#
# We label the states using the following picture
#
# +----+----+----+
# | X3 | X4 | X5 |
# +----+----+----+
# | X0 | X1 | X2 |
# +----+----+----+
#
# @system_dynamics_section@
# Create a finite transition system
sys = transys.FTS()
# Define the states of the system
sys.states.add_from(['X0', 'X1', 'X2', 'X3', 'X4', 'X5'])
sys.states.initial.add('X0') # start in state X0
# Define the allowable transitions
#! TODO (IF): can arguments be a singleton instead of a list?
#! TODO (IF): can we use lists instead of sets?
#! * use optional flag to allow list as label
sys.transitions.add_comb({'X0'}, {'X1', 'X3'})
sys.transitions.add_comb({'X1'}, {'X0', 'X4', 'X2'})
sys.transitions.add_comb({'X2'}, {'X1', 'X5'})
sys.transitions.add_comb({'X3'}, {'X0', 'X4'})
sys.transitions.add_comb({'X4'}, {'X3', 'X1', 'X5'})
sys.transitions.add_comb({'X5'}, {'X4', 'X2'})
#
import logging
logging.basicConfig(level=logging.INFO)
logging.getLogger('tulip.spec').setLevel(logging.ERROR)
logging.getLogger('tulip.synth').setLevel(logging.DEBUG)
from tulip import spec, synth, transys
import numpy as np
from scipy import sparse as sp
###########################################
# Hybrid system with 2 env, 2 system modes:
###########################################
sys_hyb = transys.FTS()
# We assume robots ability to transition between cells depends both on
# discrete controlled modes (e.g., gears) and environment modes (e.g., surface
# conditions).
sys_hyb.sys_actions.add_from({'gear0', 'gear1'})
sys_hyb.env_actions.add_from({'slippery', 'normal'})
# str states
n = 6
states = ['s' + str(i) for i in xrange(n)]
sys_hyb.atomic_propositions.add_from(['home', 'lot'])
state_labels = [{'home'}, set(), set(), set(), set(), {'lot'}]
import numpy as np
from scipy import sparse as sp
###############################
# Switched system with 4 modes:
###############################
# In this scenario we have limited actions "left, right, up, down" with
# uncertain (nondeterministics) outcomes (e.g., due to bad actuators or
# bad low-level feedback controllers)
# Only control over the dynamics is through mode switching
# Transitions should be interpreted as nondeterministic
# Create a finite transition system
env_sws = transys.FTS()
env_sws.owner = 'env'
env_sws.sys_actions.add_from({'right', 'up', 'left', 'down'})
# str states
n = 6
states = transys.prepend_with(range(n), 's')
env_sws.states.add_from(set(states))
env_sws.states.initial.add('s0')
env_sws.atomic_propositions.add_from(['home', 'lot'])
state_labels = [{'home'}, set(), set(), set(), set(), {'lot'}]
# Add states and decorate TS with state labels (aka atomic propositions)
for state, label in zip(states, state_labels):
def create_w_specs_all_init_cond(current_horizon, x_goal_loc, y_goal_loc,
w_part, transition_part, dimension_x,
dimension_y):
# Don't synthesize for corner w regions (i.e. w region that's only a corner) that can't be fulfilled (... so ugly)
# Note: Better way of doing this would be to not add corner regions to w_part...
if (w_part[current_horizon] == [(dimension_x, dimension_y, 1)]
or w_part[current_horizon] == [(dimension_x, dimension_y, 2)]
or w_part[current_horizon] == [(dimension_x, dimension_y, 3)]
or w_part[current_horizon] == [(dimension_x, dimension_y, 4)]
or w_part[current_horizon] == [(dimension_x, 1, 1)]
or w_part[current_horizon] == [(dimension_x, 1, 2)]
or w_part[current_horizon] == [(dimension_x, 1, 3)]
or w_part[current_horizon] == [(dimension_x, 1, 4)]
or w_part[current_horizon] == [(1, dimension_y, 1)]
or w_part[current_horizon] == [(1, dimension_y, 2)]
or w_part[current_horizon] == [(1, dimension_y, 3)]
or w_part[current_horizon] == [(1, dimension_y, 4)]
or w_part[current_horizon] == [(1, 1, 1)]
or w_part[current_horizon] == [(1, 1, 2)]
or w_part[current_horizon] == [(1, 1, 3)]
or w_part[current_horizon] == [(1, 1, 4)]):
return
# Create FTS and actions
sys_auto = transys.FTS()
sys_auto.sys_actions.add_from({'Stop', 'Go'})
# Fake AP's to enable all specs related to base and goal position
sys_auto.states.add_from(['FAKE'])
sys_auto.atomic_propositions.add_from({'Base', 'GoalPos'})
sys_auto.states['FAKE']['ap'] |= {'Base', 'GoalPos'}
# Add all AP's for the transition space, including those tied to 'Base' and 'GoalPos' if present in transition space
for locat in transition_part[current_horizon]:
add_ap_sub = 'Pos' + str(locat[0]) + '_' + str(locat[1]) + 'Ori' + str(
locat[2])
sys_auto.states.add_from([add_ap_sub])
if locat[0] == 2 and locat[
1] == 2: # TODO add some global indicator of the base location
sys_auto.states[add_ap_sub]['ap'] |= {'Base'}
if locat[0] == x_goal_loc and locat[1] == y_goal_loc:
sys_auto.states[add_ap_sub]['ap'] |= {'GoalPos'}
# Initial condition, empty set
sys_auto_init = set()
#print(transition_part[current_horizon])
#print(w_part[current_horizon])
#input('uhmmm...')
# NOTE: that current_horizon is 1, 2, 3, ...
# Create all transitions through brute force method of checking existence of locations in the transition region next
# to every starting point, dependent on the orientation. This is ran on transition region and inclusion in w region
# is checked in creating transitions. This is because all w regions are contained in the transition region, and
# transitions from a w region are different than those form just transition regions
for locat in transition_part[current_horizon]:
init = 'Pos' + str(locat[0]) + '_' + str(locat[1]) + 'Ori' + str(
locat[2])
if locat in w_part[current_horizon]:
sys_auto.transitions.add_comb({init}, {init}, sys_actions="Stop")
# Transitions allowed if orientation is up
if locat[2] == 1:
if (locat[0], locat[1] + 1,
1) in transition_part[current_horizon]:
endloc = 'Pos' + str(
locat[0]) + '_' + str(locat[1] + 1) + 'Ori' + str(1)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
if (locat[0] + 1, locat[1] + 1,
2) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] +
1) + '_' + str(locat[1] +
1) + 'Ori' + str(2)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
if (locat[0] - 1, locat[1] + 1,
4) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] -
1) + '_' + str(locat[1] +
1) + 'Ori' + str(4)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
# Transitions allowed if orientation is right
elif locat[2] == 2:
if (locat[0] + 1, locat[1],
2) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] + 1) + '_' + str(
locat[1]) + 'Ori' + str(2)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
if (locat[0] + 1, locat[1] + 1,
1) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] +
1) + '_' + str(locat[1] +
1) + 'Ori' + str(1)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
if (locat[0] + 1, locat[1] - 1,
3) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] +
1) + '_' + str(locat[1] -
1) + 'Ori' + str(3)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
# Transitions allowed if orientation is down
elif locat[2] == 3:
if (locat[0], locat[1] - 1,
3) in transition_part[current_horizon]:
endloc = 'Pos' + str(
locat[0]) + '_' + str(locat[1] - 1) + 'Ori' + str(3)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
if (locat[0] + 1, locat[1] - 1,
2) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] +
1) + '_' + str(locat[1] -
1) + 'Ori' + str(2)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
if (locat[0] - 1, locat[1] - 1,
4) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] -
1) + '_' + str(locat[1] -
1) + 'Ori' + str(4)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
# Transitions allowed if orientation is left
elif locat[2] == 4:
if (locat[0] - 1, locat[1],
4) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] - 1) + '_' + str(
locat[1]) + 'Ori' + str(4)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
if (locat[0] - 1, locat[1] + 1,
1) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] -
1) + '_' + str(locat[1] +
1) + 'Ori' + str(1)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
if (locat[0] - 1, locat[1] - 1,
3) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] -
1) + '_' + str(locat[1] -
1) + 'Ori' + str(3)
sys_auto.transitions.add_comb({init}, {endloc},
sys_actions="Go")
# Create possible transitions for initial conditions in only the transition region. Only transitions are
# staying still, assigned to both action groups. This works because in implementation the controllers will
# switch to the next horizon here
else:
sys_auto.transitions.add_comb({init}, {init}, sys_actions="Stop")
sys_auto.transitions.add_comb({init}, {init}, sys_actions="Go")
# Begin generating the specifications!!
# Create the additional environmental variables, including signal for w region next to goal
env_auto_vars = {'StopSignal', 'Fire'}
if current_horizon == 1:
env_auto_vars |= {'SyncSignal'}
# Create the environment specifications, including progress related to sync signal next to goal
env_auto_safe = set()
env_auto_init = {'!StopSignal', '!Fire'}
env_auto_prog = {'!StopSignal', '!Fire'}
if current_horizon == 1:
env_auto_prog |= {'SyncSignal'}
# System variables and safety specification empty sets
sys_auto_vars = set()
sys_auto_safe = set()
# Create stop signal requirements # TODO This should be changed to present actions...
sys_auto_safe |= {'(StopSignal&&!Fire)->(X(sys_actions = "Stop"))'}
sys_auto_safe |= {'(!(StopSignal&&!Fire))->(X(sys_actions = "Go"))'}
# Add relevant phi variables to safety (i.e. all phi contained within this region). Never enter phi locations
phi = ''
for locat in transition_part[current_horizon]:
state = 'Pos' + str(locat[0]) + '_' + str(locat[1]) + 'Ori' + str(
locat[2])
for names in phi_states:
if state == names:
phi = phi + '!(loc = "' + names + '")&&'
phi = phi + 'True'
sys_auto_safe |= {phi}
# Empty initial progress
sys_auto_prog = set()
# Display progress statement to user
print(('Beginning synthesis of W' + str(current_horizon) + ' for goal (' +
str(x_goal_loc) + ',' + str(y_goal_loc) + ')!'))
# Cycle through all initial conditions in this w region for synthesizing controller
for idxn, locat in enumerate(w_part[current_horizon]):
locat_sub = locat
#if locat == (9, 8, 3):
# print('here')
# input('wait...')
# Create checks to see if current position is viable initial condition
current_state = 'Pos' + str(locat_sub[0]) + '_' + str(
locat_sub[1]) + 'Ori' + str(locat_sub[2])
# Run through names in phi_states to check if it's included
indicator = 0
for names in phi_states:
if current_state == names:
indicator = 1
# If current state passed, then add to initial condition and synthesize. Otherwise, move to next I.C.
if indicator == 0:
sys_auto_init = {'(loc = "' + current_state + '")'}
else:
continue
# Create the progress statements and synthesize. Progress statements differ depending on current horizon
# For horizon W1
if current_horizon == 1:
# This section is the 'sync' version of specs, which is just the normal "correct" version
print('Sync synthesis for ' + current_state)
# Start timer for synthesis
start_time = time.time()
# Spec just states that the sync signal implies goal position is there
sync_spec = '(SyncSignal)->GoalPos'
sys_auto_prog = {sync_spec}
# Create the GR spec for all the generated env and sys specs
specs_final_sync = spec.GRSpec(env_auto_vars, sys_auto_vars,
env_auto_init, sys_auto_init,
env_auto_safe, sys_auto_safe,
env_auto_prog, sys_auto_prog)
# Synthesizer attributes
specs_final_sync.moore = True
option = 'omega'
specs_final_sync.qinit = '\E \A'
# synthesizer should find initial system values that satisfy
# `env_init /\ sys_init` and work, for every environment variable
# initial values that satisfy `env_init`.
# SYNTHESIZE!!!
ctrl_final_sync = synth.synthesize(option,
specs_final_sync,
env=None,
sys=sys_auto,
ignore_sys_init=True)
# Failure results in adjustments to the horizon related to current I.C.
if ctrl_final_sync is None:
print('Failed to synthesize ' + current_state +
', moving to next w_part and transition_part')
w_part[current_horizon + 1].append(locat)
if locat not in transition_part[current_horizon + 1]:
transition_part[current_horizon + 1].append(locat)
w_part[current_horizon][idxn] = None
transition_part[current_horizon].remove(locat)
#if locat == (9, 8, 2):
# print('here')
# print(w_part[current_horizon])
# input('wait...')
# Stopwatch and print
synth_time = time.time() - start_time
print(synth_time)
# Write controller to relevant location if it synthesized
filename = 'ctrls/Goal' + str(x_goal_loc) + '_' + str(y_goal_loc) + '/G' + str(x_goal_loc) + '_' + \
str(y_goal_loc) + current_state + '.py' #'_W' + str(current_horizon) +
if ctrl_final_sync is not None:
dumpsmach.write_python_case(filename, ctrl_final_sync)
#if locat == (9, 8, 2):
# print('here')
# print(w_part[current_horizon])
# input('wait...')
# All other horizons from the first one (>= W2)
else:
print('Synthesis for ' + current_state)
# Start timer for synthesis
start_time = time.time()
# Generate progress to any area of transition region that aren't in the w region (inner layer)
spec_inter = '(('
for locat2 in transition_part[current_horizon]:
if locat2 not in w_part[current_horizon]:
locations = 'Pos' + str(locat2[0]) + '_' + str(
locat2[1]) + 'Ori' + str(locat2[2])
spec_inter = spec_inter + 'loc = "' + locations + '")||('
# Finish tail end of progress spec (false is there to wrap up string generated by loop)
spec_inter = spec_inter + 'False))'
sys_auto_prog |= {spec_inter}
# Create the GR spec for all the generated env and sys specs
specs_inter = spec.GRSpec(env_auto_vars, sys_auto_vars,
env_auto_init, sys_auto_init,
env_auto_safe, sys_auto_safe,
env_auto_prog, sys_auto_prog)
# Synthesizer attributes
specs_inter.moore = True
option = 'omega'
specs_inter.qinit = '\E \A'
# synthesizer should find initial system values that satisfy
# `env_init /\ sys_init` and work, for every environment variable
# initial values that satisfy `env_init`.
# SYNTHESIZE!!!
ctrl_inter = synth.synthesize(option,
specs_inter,
sys=sys_auto,
ignore_sys_init=True)
# Failure results in adjustments to the horizon related to current I.C.
if ctrl_inter is None:
print('Failed to synthesize ' + current_state +
', moving to next w_part and transition_part')
w_part[current_horizon + 1].append(locat)
if locat not in transition_part[current_horizon + 1]:
transition_part[current_horizon + 1].append(locat)
w_part[current_horizon][idxn] = None
transition_part[current_horizon].remove(locat)
# Stopwatch and print
synth_time = time.time() - start_time
print(synth_time)
# Write controller to relevant location if it synthesized
filename = 'ctrls/Goal' + str(x_goal_loc) + '_' + str(y_goal_loc) + '/G' + str(x_goal_loc) + '_' + \
str(y_goal_loc) + current_state + '.py' #'_W' + str(current_horizon) +
if ctrl_inter is not None:
dumpsmach.write_python_case(filename, ctrl_inter)
logging.basicConfig(filename='sys_and_env_ts.log',
level=logging.DEBUG,
filemode='w')
logger = logging.getLogger(__name__)
from tulip import transys, spec, synth
# the system's spatial layout:
# +----+----+----+
# | X3 | X4 | X5 |
# +----+----+----+
# | X0 | X1 | X2 |
# +----+----+----+
sys = transys.FTS()
sys.states.add_from(['X0', 'X1', 'X2', 'X3', 'X4', 'X5'])
sys.states.initial.add_from(['X0', 'X1'])
sys.transitions.add_from(
[('X0', x) for x in {'X1', 'X3'}] + [('X1', x)
for x in {'X0', 'X4', 'X2'}] +
[('X2', x) for x in {'X1', 'X5'}] + [('X3', x) for x in {'X0', 'X4'}] +
[('X4', x) for x in {'X3', 'X1', 'X5'}] +
# compared to home_parking, this car can stay in lot next
[('X5', x) for x in {'X4', 'X2', 'X5'}])
sys.atomic_propositions.add_from({'home', 'lot'})
sys.states.add('X0', ap={'home'})
sys.states.add('X5', ap={'lot'})
print sys
# between adjacent cells are allowed, which we model as a transition
# system in this example (it would also be possible to do this via a
# formula)
#
# We label the states using the following picture
#
# +----+----+----+
# | X3 | X4 | X5 |
# +----+----+----+
# | X0 | X1 | X2 |
# +----+----+----+
#
# @system_dynamics_section@
# Create a finite transition system
sys_water = transys.FTS()
sys_water_vars = set()
# Define the states of the system
sys_water.states.add_from(['Water100', 'Water60', 'Water20', 'Water0'])
sys_water.states.initial.add('Water100') # start in state X0
#sys_water.states.initial.add('Water60')
#sys_water.states.initial.add('Water20')
#sys_water.states.initial.add('Water0')
# Define the allowable transitions
sys_water.transitions.add_comb({'Water100'}, {'Water60', 'Water100'})
sys_water.transitions.add_comb({'Water60'}, {'Water100', 'Water20', 'Water60'})
sys_water.transitions.add_comb({'Water20'}, {'Water100', 'Water0', 'Water20'})
sys_water.transitions.add_comb({'Water0'}, {'Water100', 'Water0'})
"""
Simple example with uncontrolled switching, for debugging
6 cell robot example.
+---+---+---+
| 3 | 4 | 5 |
+---+---+---+
| 0 | 1 | 2 |
+---+---+---+
"""
from tulip import spec, synth, transys
import numpy as np
from scipy import sparse as sp
sys_swe = transys.FTS()
sys_swe.env_actions.add_from({'sun', 'rain'})
# Environment actions are mutually exclusive.
n = 2
states = ['s' + str(i) for i in xrange(n)]
sys_swe.states.add_from(states)
sys_swe.states.initial |= ['s0']
# different transitions possible, depending on weather
transmat1 = sp.lil_matrix(np.array([[0, 1], [1, 0]]))
sys_swe.transitions.add_adj(transmat1, states, env_actions='sun')
# avoid being killed by environment
transmat2 = sp.lil_matrix(np.array([[1, 0], [0, 1]]))
sys_swe.transitions.add_adj(transmat2, states, env_actions='rain')
sys_prog = {'mem'}
specs = spec.GRSpec(env_vars=env_vars,
sys_vars=sys_vars,
sys_init=sys_init,
sys_safety=sys_safe,
env_prog=env_prog,
sys_prog=sys_prog)
specs.moore = False
specs.qinit = '\A \E'
ctrl = synth.synthesize(specs)
ctrl.save('gr1_arbitrary_set0.pdf')
"""
2nd example
"""
sys = trs.FTS()
states = {'a', 'b', 'c', 'd', 'e', 'foo'}
sys.states.add_from(states)
sys.states.initial.add('a')
sys.transitions.add_from([('a', x)
for x in {'b', 'd'}] + [('b', x)
for x in {'a', 'e', 'c'}] +
[('c', x)
for x in {'b', 'foo'}] + [('d', x)
for x in {'a', 'e'}] +
[('e', x)
for x in {'d', 'b', 'foo'}] + [('foo', x)
for x in {'e', 'c'}])
def create_w_specs_all_init_cond(current_horizon, x_goal_loc, y_goal_loc, w_part,
transition_part, dimension_x, dimension_y):
# Don't synthesize for corner w regions (i.e. w region that's only a corner) that can't be fulfilled (... so ugly)
# Note: Better way of doing this would be to not add corner regions to w_part...
if (w_part[current_horizon] == [(dimension_x, dimension_y, 1)] or
w_part[current_horizon] == [(dimension_x, dimension_y, 2)] or
w_part[current_horizon] == [(dimension_x, dimension_y, 3)] or
w_part[current_horizon] == [(dimension_x, dimension_y, 4)] or
w_part[current_horizon] == [(dimension_x, 1, 1)] or
w_part[current_horizon] == [(dimension_x, 1, 2)] or
w_part[current_horizon] == [(dimension_x, 1, 3)] or
w_part[current_horizon] == [(dimension_x, 1, 4)] or
w_part[current_horizon] == [(1, dimension_y, 1)] or
w_part[current_horizon] == [(1, dimension_y, 2)] or
w_part[current_horizon] == [(1, dimension_y, 3)] or
w_part[current_horizon] == [(1, dimension_y, 4)] or
w_part[current_horizon] == [(1, 1, 1)] or
w_part[current_horizon] == [(1, 1, 2)] or
w_part[current_horizon] == [(1, 1, 3)] or
w_part[current_horizon] == [(1, 1, 4)]):
return
# Create FTS and actions
sys_auto = transys.FTS()
sys_auto.sys_actions.add_from({'Stop', 'go', 'goVert', 'goHori'})
# Fake AP's to enable all specs related to base and goal position
sys_auto.states.add_from(['fAKE'])
sys_auto.atomic_propositions.add_from({'Base', 'goalPos'})
sys_auto.states['fAKE']['ap'] |= {'Base', 'goalPos'}
# Add all AP's for the transition space, including those tied to 'Base' and 'goalPos' if present in transition space
for locat in transition_part[current_horizon]:
add_ap_sub = 'Pos' + str(locat[0]) + '_' + str(locat[1]) + 'Ori' + str(locat[2])
sys_auto.states.add_from([add_ap_sub])
if locat[0] == 2 and locat[1] == 2: # TODO add some global indicator of the base location
sys_auto.states[add_ap_sub]['ap'] |= {'Base'}
if locat[0] == x_goal_loc and locat[1] == y_goal_loc:
sys_auto.states[add_ap_sub]['ap'] |= {'goalPos'}
# Initial condition, empty set
sys_auto_init = set()
#print(transition_part[current_horizon])
#print(w_part[current_horizon])
#input('uhmmm...')
# NOTE: that current_horizon is 1, 2, 3, ...
# Create all transitions through brute force method of checking existence of locations in the transition region next
# to every starting point, dependent on the orientation. This is ran on transition region and inclusion in w region
# is checked in creating transitions. This is because all w regions are contained in the transition region, and
# transitions from a w region are different than those form just transition regions
for locat in transition_part[current_horizon]:
init = 'Pos' + str(locat[0]) + '_' + str(locat[1]) + 'Ori' + str(locat[2])
if locat in w_part[current_horizon]:
sys_auto.transitions.add_comb({init}, {init}, sys_actions="Stop")
# Transitions allowed if orientation is up
if locat[2] == 1:
if (locat[0], locat[1] + 1, 1) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0]) + '_' + str(locat[1] + 1) + 'Ori' + str(1)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="goVert")
if (locat[0] + 1, locat[1] + 1, 2) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] + 1) + '_' + str(locat[1] + 1) + 'Ori' + str(2)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="go")
if (locat[0] - 1, locat[1] + 1, 4) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] - 1) + '_' + str(locat[1] + 1) + 'Ori' + str(4)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="go")
# Transitions allowed if orientation is right
elif locat[2] == 2:
if (locat[0] + 1, locat[1], 2) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] + 1) + '_' + str(locat[1]) + 'Ori' + str(2)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="goHori")
if (locat[0] + 1, locat[1] + 1, 1) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] + 1) + '_' + str(locat[1] + 1) + 'Ori' + str(1)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="go")
if (locat[0] + 1, locat[1] - 1, 3) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] + 1) + '_' + str(locat[1] - 1) + 'Ori' + str(3)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="go")
# Transitions allowed if orientation is down
elif locat[2] == 3:
if (locat[0], locat[1] - 1, 3) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0]) + '_' + str(locat[1] - 1) + 'Ori' + str(3)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="goVert")
if (locat[0] + 1, locat[1] - 1, 2) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] + 1) + '_' + str(locat[1] - 1) + 'Ori' + str(2)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="go")
if (locat[0] - 1, locat[1] - 1, 4) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] - 1) + '_' + str(locat[1] - 1) + 'Ori' + str(4)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="go")
# Transitions allowed if orientation is left
elif locat[2] == 4:
if (locat[0] - 1, locat[1], 4) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] - 1) + '_' + str(locat[1]) + 'Ori' + str(4)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="goHori")
if (locat[0] - 1, locat[1] + 1, 1) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] - 1) + '_' + str(locat[1] + 1) + 'Ori' + str(1)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="go")
if (locat[0] - 1, locat[1] - 1, 3) in transition_part[current_horizon]:
endloc = 'Pos' + str(locat[0] - 1) + '_' + str(locat[1] - 1) + 'Ori' + str(3)
sys_auto.transitions.add_comb({init}, {endloc}, sys_actions="go")
# Create possible transitions for initial conditions in only the transition region. Only transitions are
# staying still, assigned to both action groups. This works because in implementation the controllers will
# switch to the next horizon here
else:
sys_auto.transitions.add_comb({init}, {init}, sys_actions="Stop")
sys_auto.transitions.add_comb({init}, {init}, sys_actions="go")
check_hori = None
if w_part[current_horizon - 1] is None:
check_hori = None
else:
check_hori = None
for ct in w_part[current_horizon - 1]:
if ct is not None:
if 'Pos' + str(ct[0]) + '_' + str(ct[1]) + 'Ori' + str(ct[2]) not in phi_states:
check_hori = True
# Begin generating the specifications!!
# Create the additional environmental variables, including signal for w region next to goal
env_auto_vars = {'fire'}#'StopSignal',
if current_horizon == 1 or check_hori is None:
env_auto_vars |= {'SyncHori'}#, 'SyncSignal', 'SyncVert'}
#env_auto_vars |= {'SH1', 'SH2', 'SHb'}#, 'SV1', 'SV2', 'SVb', 'S1', 'S2', 'Sb'}
# Create the environment specifications, including progress related to sync signal next to goal
env_auto_safe = set()
env_auto_init = {'!fire'}#'!StopSignal',
env_auto_prog = {'!fire'}#'!StopSignal',
#if current_horizon == 1 or check_hori is None:
#env_auto_prog |= {'SyncSignal||SyncVert||SyncHori'}
#if current_horizon == 1 or check_hori is None:
#env_auto_safe |= {'SyncSignal->(!SyncVert && !SyncHori)'}
#env_auto_safe |= {'SyncVert->(!SyncSignal && !SyncHori)'}
#env_auto_safe |= {'SyncHori->(!SyncSignal && !SyncVert)'}
# Create the specification for [](SyncHori->(SyncHori U Goal))
#env_auto_safe |= {'(SH1&&!SH2&&!SHb)||(!SH1&&SH2&&!SHb)||(!SH1&&!SH2&&SHb)'}
#env_auto_init |= {'SH1'}
#env_auto_prog |= {'SH1||SH2'}
#env_auto_safe |= {'((SH1 && (!SyncHori || goalPos) && X SH1) || ' +
# '(SH1 && (SyncHori && !goalPos) && X SH2) || ' +
# '(SH2 && (SyncHori && !goalPos) && X SH2) || ' +
# '(SH2 && !SyncHori && X SHb) || ' +
# '(SH2 && (SyncHori && goalPos) && X SH1) || ' +
# '(SHb && X SHb))'}
#env_auto_safe |= {'SyncSignal->(!((!goalPos)U(!SyncSignal)))'}
#env_auto_safe |= {'SyncVert->(!((!goalPos)U(!SyncVert)))'}
#env_auto_safe |= {'SyncHori->(!((!goalPos)U(!SyncHori)))'}
#env_auto_safe |= {'X VertPrev <-> SyncVert'}
#env_auto_safe |= {'X HoriPrev <-> SyncHori'}
#env_auto_safe |= {'(X (Sync_Hori_extra) && goalPos)->(SyncHori)'}
#env_auto_safe |= {'(X(X (Sync_Hori_extra) && goalPos))->(SyncHori)'}
#env_auto_safe |= {'(X (Sync_Vert_extra) && goalPos)->(SyncVert)'}
# System variables and safety specification empty sets
sys_auto_vars = set()
sys_auto_safe = set()
# Add relevant phi variables to safety (i.e. all phi contained within this region). Never enter phi locations
phi = ''
for locat in transition_part[current_horizon]:
state = 'Pos' + str(locat[0]) + '_' + str(locat[1]) + 'Ori' + str(locat[2])
for names in phi_states:
if state == names:
phi = phi + '!(loc = "' + names + '")&&'
phi = phi + 'True'
sys_auto_safe |= {phi}
# Empty initial progress
sys_auto_prog = set()
# Display progress statement to user
print(('Beginning synthesis of W' + str(current_horizon) + ' for goal (' +
str(x_goal_loc) + ',' + str(y_goal_loc) + ')!'))
# Cycle through all initial conditions in this w region for synthesizing controller
for idxn, locat in enumerate(w_part[current_horizon]):
locat_sub = locat
#if locat == (9, 8, 3):
# print('here')
# input('wait...')
# Create checks to see if current position is viable initial condition
current_state = 'Pos' + str(locat_sub[0]) + '_' + str(locat_sub[1]) + 'Ori' + str(locat_sub[2])
# Run through names in phi_states to check if it's included
indicator = 0
for names in phi_states:
if current_state == names:
indicator = 1
# If current state passed, then add to initial condition and synthesize. Otherwise, move to next I.C.
if indicator == 0:
sys_auto_init = {'(loc = "' + current_state + '")'}
else:
continue
# Create the progress statements and synthesize. Progress statements differ depending on current horizon
# For horizon W1
if current_horizon == 1 or check_hori is None:
# This section is the 'sync' version of specs, which is just the normal "correct" version
print('Sync synthesis for ' + current_state)
# Start timer for synthesis
start_time = time.time()
statement_hori = ((x_goal_loc + 1, y_goal_loc) not in obstacle_location and \
(x_goal_loc - 1, y_goal_loc) not in obstacle_location and 'Pos' + str(x_goal_loc + 1) + '_' + \
str(y_goal_loc) + 'Ori2' \
not in phi_states and 'Pos' + str(x_goal_loc + 1) + '_' + str(y_goal_loc) + 'Ori4' not in phi_states and \
'Pos' + str(x_goal_loc - 1) + '_' + str(y_goal_loc) + 'Ori2' not in phi_states and 'Pos' + \
str(x_goal_loc - 1) + '_' + str(y_goal_loc) + \
'Ori4' not in phi_states)
statement_vert = ((x_goal_loc, y_goal_loc + 1) not in obstacle_location and \
(x_goal_loc, y_goal_loc - 1) not in obstacle_location and 'Pos' + str(x_goal_loc) + '_' + str(y_goal_loc + 1) + 'Ori1' \
not in phi_states and 'Pos' + str(x_goal_loc) + '_' + str(y_goal_loc + 1) + 'Ori3' not in phi_states and \
'Pos' + str(x_goal_loc) + '_' + str(y_goal_loc - 1) +'Ori1' not in phi_states and 'Pos' + \
str(x_goal_loc) + '_' + str(y_goal_loc - 1) + 'Ori3' not in phi_states)
sync_hori_cond = '(!Sync_Hori_extra && goalPos)'
sync_vert_cond = '(!Sync_Vert_extra && goalPos)'
sync_cond = '(X (Sync_extra) && goalPos)'
sync_spec_hori = 'Sync_Hori_extra'
sync_spec_vert = 'Sync_Vert_extra'
sync_spec = 'Sync_extra'
stop_condition_all = 'StopSignal&&!fire'
if statement_hori and statement_vert:
sys_auto_vars |= {'Sync_Hori_extra'}#, 'Sync_Vert_extra', 'Sync_extra'}#, 'SH_proxy', 'SV_proxy', 'S_proxy'}#, 'Sync_vert_prev', 'Sync_hori_prev'}
sys_auto_init |= {'Sync_Hori_extra'}#, 'Sync_Vert_extra', 'Sync_extra'}#, '!SH_proxy', '!SV_proxy', '!S_proxy'}
# Proxy variables and rules
#sys_auto_safe |= {'(!SH_proxy&&!SV_proxy&&!S_proxy)||(SH_proxy&&!SV_proxy&&!S_proxy)||' +
# '(!SH_proxy&&SV_proxy&&!S_proxy)||(!SH_proxy&&!SV_proxy&&S_proxy)'}
#sys_auto_safe |= {'((SH_proxy&&!SV_proxy&&!S_proxy)||' +
# '(!SH_proxy&&SV_proxy&&!S_proxy)||(!SH_proxy&&!SV_proxy&&S_proxy))->' +
# '((SH_proxy <-> X SH_proxy)&&(SV_proxy <-> X SV_proxy)&&(S_proxy <-> X S_proxy))'}
#sys_auto_safe |= {'(!SH_proxy&&!SV_proxy&&!S_proxy&&SyncHori)->(X SH_proxy)'}
#sys_auto_safe |= {'(!SH_proxy&&!SV_proxy&&!S_proxy&&SyncVert)->(X SV_proxy)'}
#sys_auto_safe |= {'(!SH_proxy&&!SV_proxy&&!S_proxy&&SyncSignal)->(X S_proxy)'}
#sys_auto_safe |= {'(goalPos&&!Sync_Hori_extra)->(X !SH_proxy)'}
#sys_auto_safe |= {'(goalPos&&!Sync_Vert_extra)->(X !SV_proxy)'}
#sys_auto_safe |= {'(goalPos&&!Sync_extra)->(X !S_proxy)'}
#sys_auto_safe |= {'(X Sync_vert_prev <-> SyncVert) && (X Sync_hori_prev <-> SyncHori)'}
sys_auto_safe |= {'((!SyncHori)&& X Sync_Hori_extra) || ((X (Sync_Hori_extra) <-> goalPos)) || (Sync_Hori_extra && !SyncHori)'}#{'(X (Sync_Hori_extra) <-> goalPos) || (Sync_Hori_extra && !SyncHori)'}
#sys_auto_safe |= {'((!SyncVert)&& X Sync_Vert_extra) || ((X (Sync_Vert_extra) <-> goalPos)) || (Sync_Vert_extra && !SyncVert)'}
#sys_auto_safe |= {'(X (Sync_extra) <-> goalPos) || (Sync_extra && !S_proxy)'}#{'(X (Sync_extra) <-> goalPos) || (Sync_extra && !SyncSignal)'}
#stop_condition1 = '(!(X(' + sync_hori_cond + '))&&!(' + sync_hori_cond + '))'
#stop_condition2 = '(!(X(' + sync_vert_cond + '))&&!(' + sync_vert_cond + '))'
#stop_condition3 = '(!(X(' + sync_cond + '))&&!(' + sync_cond + '))'
#sys_auto_safe |= {'(' + stop_condition_all + '&&' + stop_condition1 + '&&' \
# + stop_condition2 + '&&' + stop_condition3 + ')->(X(sys_actions = "Stop"))'}
#sys_auto_safe |= {'(!(' + stop_condition_all + '&&' + stop_condition1 + '&&' \
# + stop_condition2 + '&&' + stop_condition3 + '))->(X(sys_actions != "Stop"))'}
sys_auto_safe |= {'X(sys_actions != "Stop")'}
#sys_auto_safe |= {'(' + sync_hori_cond + ')->((X sys_actions = "goHori") && (sys_actions = "goHori"))'}
#sys_auto_safe |= {'(' + sync_vert_cond + ')->((X(sys_actions = "goVert")) && (sys_actions = "goVert"))'}
sys_auto_prog |= {sync_spec_hori}
#sys_auto_prog |= {sync_spec_vert}
#sys_auto_prog |= {sync_spec}
'''elif statement_vert:
stop_condition = '(StopSignal&&!fire&&!(X(' + sync_spec_vert + '))&&'+ \
'!(X(' + sync_spec + ')))'
sys_auto_safe |= {stop_condition + '->(X(sys_actions = "Stop"))'}
sys_auto_safe |= {'(!' + stop_condition + ')->(X(sys_actions != "Stop"))'}
sys_auto_safe |= {'(X(' + sync_spec_vert + '))->(sys_actions = "goVert" && X(sys_actions = "goVert"))'}
sys_auto_prog = {sync_spec_vert}
sys_auto_prog |= {sync_spec}
elif statement_hori:
stop_condition = '(StopSignal&&!fire&&!(X(' + sync_spec_hori + '))&&'+ \
'!(X(' + sync_spec + ')))'
sys_auto_safe |= {stop_condition + '->(X(sys_actions = "Stop"))'}
sys_auto_safe |= {'(!' + stop_condition + ')->(X(sys_actions != "Stop"))'}
sys_auto_safe |= {'(X(' + sync_spec_hori + '))->(sys_actions = "goHori" && X(sys_actions = "goHori"))'}
sys_auto_prog = {sync_spec_hori}
sys_auto_prog |= {sync_spec}
else:
stop_condition = '(StopSignal&&!fire)'
sys_auto_safe |= {stop_condition + '->(X(sys_actions = "Stop"))'}
sys_auto_safe |= {'(!' + stop_condition + ')->(X(sys_actions != "Stop"))'}
sys_auto_prog = {sync_spec}'''
#if statement_vert:
# Spec just states that the sync signal implies goal position is there
# Create the GR spec for all the generated env and sys specs
specs_final_sync = spec.GRSpec(env_auto_vars, sys_auto_vars, env_auto_init, sys_auto_init,
env_auto_safe, sys_auto_safe, env_auto_prog, sys_auto_prog)
print(specs_final_sync)
# Synthesizer attributes
specs_final_sync.moore = True
option = 'omega'
specs_final_sync.qinit = '\E \A'
# synthesizer should find initial system values that satisfy
# `env_init /\ sys_init` and work, for every environment variable
# initial values that satisfy `env_init`.
# SYNTHESIZE!!!
ctrl_final_sync = synth.synthesize(option, specs_final_sync, env=None, sys=sys_auto, ignore_sys_init=True)
print(sys.getsizeof(ctrl_final_sync))
# failure results in adjustments to the horizon related to current I.C.
if ctrl_final_sync is None:
print('Failed to synthesize ' + current_state + ', moving to next w_part and transition_part')
w_part[current_horizon + 1].append(locat)
if locat not in transition_part[current_horizon + 1]:
transition_part[current_horizon + 1].append(locat)
w_part[current_horizon][idxn] = None
transition_part[current_horizon].remove(locat)
#if locat == (9, 8, 2):
# print('here')
# print(w_part[current_horizon])
# input('wait...')
# Stopwatch and print
synth_time = time.time() - start_time
print(synth_time)
# Write controller to relevant location if it synthesized
filename = 'ctrls3/Goal' + str(x_goal_loc) + '_' + str(y_goal_loc) + '/G' + str(x_goal_loc) + '_' + \
str(y_goal_loc) + current_state + '.py' #'_W' + str(current_horizon) +
if ctrl_final_sync is not None:
dumpsmach.write_python_case(filename, ctrl_final_sync)
#if locat == (9, 8, 2):
# print('here')
# print(w_part[current_horizon])
# input('wait...')
# All other horizons from the first one (>= W2)
else:
print('Synthesis for ' + current_state)
# Start timer for synthesis
start_time = time.time()
# Generate progress to any area of transition region that aren't in the w region (inner layer)
spec_inter = '(('
for locat2 in transition_part[current_horizon]:
if locat2 not in w_part[current_horizon]:
locations = 'Pos' + str(locat2[0]) + '_' + str(locat2[1]) + 'Ori' + str(locat2[2])
spec_inter = spec_inter + 'loc = "' + locations + '")||('
# Finish tail end of progress spec (false is there to wrap up string generated by loop)
spec_inter = spec_inter + 'False))'
sys_auto_prog |= {spec_inter}
stop_condition = '(StopSignal&&!fire)'
sys_auto_safe |= {stop_condition + '->(X(sys_actions = "Stop"))'}
sys_auto_safe |= {'(!' + stop_condition + ')->(X(sys_actions != "Stop"))'}
# Create the GR spec for all the generated env and sys specs
specs_inter = spec.GRSpec(env_auto_vars, sys_auto_vars, env_auto_init, sys_auto_init,
env_auto_safe, sys_auto_safe, env_auto_prog, sys_auto_prog)
# Synthesizer attributes
specs_inter.moore = True
option = 'omega'
specs_inter.qinit = '\E \A'
# synthesizer should find initial system values that satisfy
# `env_init /\ sys_init` and work, for every environment variable
# initial values that satisfy `env_init`.
# SYNTHESIZE!!!
ctrl_inter = synth.synthesize(option, specs_inter, sys=sys_auto, ignore_sys_init=True)
# Failure results in adjustments to the horizon related to current I.C.
if ctrl_inter is None:
print('Failed to synthesize ' + current_state + ', moving to next w_part and transition_part')
w_part[current_horizon + 1].append(locat)
if locat not in transition_part[current_horizon + 1]:
transition_part[current_horizon + 1].append(locat)
w_part[current_horizon][idxn] = None
transition_part[current_horizon].remove(locat)
# Stopwatch and print
synth_time = time.time() - start_time
print(synth_time)
# Write controller to relevant location if it synthesized
filename = 'ctrls/Goal' + str(x_goal_loc) + '_' + str(y_goal_loc) + '/G' + str(x_goal_loc) + '_' + \
str(y_goal_loc) + current_state + '.py' #'_W' + str(current_horizon) +
if ctrl_inter is not None:
dumpsmach.write_python_case(filename, ctrl_inter)
def runPaperExample(exampleRun, ver='1', riskgt=17, energygt=0):
# set initial variables
if (exampleRun == 'test1'):
ver = '1'
riskgt = 17
energygt = 0
elif (exampleRun == 'test2'):
ver = '2'
riskgt = 17
energygt = 6
elif (exampleRun == 'test3'):
ver = '3'
riskgt = 16
energygt = 6
# set logfile
import logging
logging.basicConfig(filename='deliberative_action_planner_%s.log' % ver,
level=logging.INFO,
filemode='w') # level=logging.DEBUG
logger = logging.getLogger(__name__)
# Create a finite transition system
sys_sws = transys.FTS() # system actions only, no (open) env. yet
# add the states and actions
#sys_sws.states.add_from(['s1','s2','s3','s4','s5'])
for i in range(1, 5 + 1):
sys_sws.states.add('s' + str(i))
#sys_sws.actions.add_from(['a12_1','a12_2','a23_1', 'a23_2', 'a15_1', 'a15_2', 'a14_1', 'a45_1', 'a35_1'])
# then set up the transitions (state1, action1 -> state2)
for numlist in [[1, 2, 2], [2, 3, 2], [1, 5, 2], [1, 4, 1], [4, 5, 1],
[3, 5, 1]]:
st1 = numlist[
0] # [s"#1" loc1, s"#2" loc2, number of actions a"#1#2_#"]
st2 = numlist[1]
numactions = numlist[2]
st1str = 's' + str(st1)
st2str = 's' + str(st2)
#sys_sws.states.add_from([st1str,st2str]) # could do this instead of above
for i in range(1, numactions + 1):
astr = 'a' + str(st1) + str(st2) + '_' + str(i)
sys_sws.actions.add(astr) # could do this instead of above
sys_sws.transitions.add(st1str, st2str, actions=astr)
sys_sws.transitions.add(st2str, st1str, actions=astr)
# then set up transitions for (state1, wait -> state1)
sys_sws.actions.add('wait')
for st1 in range(1, 5 + 1):
st1str = 's' + str(st1)
sys_sws.transitions.add(st1str, st1str, actions='wait')
# set s1 as initial state
initial_state_str = 's1'
#initial_state_str = 's2'
sys_sws.states.initial.add(initial_state_str)
# This is what is visible to the outside world (and will go into synthesis method)
print(
sys_sws
) # show the Finite Transition System, make sure it was encoded properly
sys_sws.save('deliberative_%sa.pdf' %
ver) # save the visual diagram of the FTS, for same reason
# sys_sws.save() shows all possible transitions between states according to actions
print("Done saving deliberative_%sa.pdf" % ver)
#
# Environment variables and specification
#
# The environment can issue a park signal that the robot just respond
# to by moving to the lower left corner of the grid. We assume that
# the park signal is turned off infinitely often.
#
env_vars = set() # empty set
env_init = set() # empty set
env_prog = set() # empty set
env_safe = set() # empty set
#
# System specification
#
# The system specification is that the robot should (repeatedly?) revisit
# the rightmost spire (this is because there are no 'wait' or 'stay in same
# state' actions currently).
# does sys_vars actually use the "0" value? it doesn't seem to...
# basically, looks like a "0" value pulls the value completely off the stack (as False?), in the 'atomic proposition' sense of things
# so, we want to avoid using value=0 for this kind of stuff! ^_^
# note: for gr1c, lower bound must be zero (0)
print("Writing up goals and such for system")
print("Writing up sys vars and such for system")
sys_vars = dict()
sys_init = set()
sys_prog = set()
sys_safe = set()
sys_init |= {'sys_actions=wait'} # start in wait mode
goalstr = 's5'
#goalstr = 's3'
sys_prog |= {'loc=%s' % goalstr} # goal --> []<> (get to s5)
sys_safe |= {
'loc=%s -> next(loc=%s)' % (goalstr, goalstr)
} # then stay there forever # this didn't seem to work with the FTS before, now does for some reason, not sure what's going on...
energylo = 0
energyhi = 20
sys_vars.update({'energy': (energylo, energyhi)})
sys_init |= {'energy=%d' % energyhi}
sys_safe |= {'energy > %d' % energygt
} # must keep fuel/energy usage above energygt
risklo = 0
riskhi = 20
sys_vars.update({'risk': (risklo, riskhi)})
sys_init |= {'risk=%d' % riskhi}
sys_safe |= {'risk > %d' % riskgt} # must keep risk usage above riskgt
# 0 1 2 3 4 5 6 7 8 9
allactStr = [
'a35_1', 'a23_1', 'a23_2', 'a12_1', 'a12_2', 'a15_2', 'a15_1', 'a45_1',
'a14_1', 'wait'
]
alldropenergy = [4, 3, 6, 2, 3, 7, 6, 5, 3, 0]
alldroprisk = [1, 4, 0, 2, 1, 1, 2, 0, 0, 0]
for actStr, energydrop, riskdrop in zip(allactStr, alldropenergy,
alldroprisk):
#energystr = energyStr(energylo,energyhi,energydrop)
energystr = dropStr('energy', energylo, energyhi, energydrop)
sys_safe |= {
'sys_actions=%s -> (%s && (X(energy=0) <-> energy<=%d))' %
(actStr, energystr, alldropenergy[i - 1])
} # wait action keeps energy at same level (no energy used)
riskstr = dropStr('risk', risklo, riskhi, riskdrop)
sys_safe |= {
'sys_actions=%s -> (%s && (X(risk=0) <-> risk<=%d))' %
(actStr, riskstr, alldroprisk[i - 1])
} # wait action keeps energy at same level (no energy used)
# 0 1 2 3 4
# atakepicture#
alldropenergy2 = [0, 0, 0, 0, 0]
alldroprisk2 = [0, 0, 0, 0, 0]
for i in range(1, 5 + 1): # [1] atakepicture1,picAtS1Taken, ...
actStr = 'atakepicture%d' % i
energystr = dropStr('energy', energylo, energyhi,
alldropenergy2[i - 1])
sys_safe |= {
'sys_actions=%s -> (%s && (X(energy=0) <-> energy<=%d))' %
(actStr, energystr, alldropenergy2[i - 1])
} # wait action keeps energy at same level (no energy used)
riskstr = dropStr('risk', risklo, riskhi, alldroprisk2[i - 1])
sys_safe |= {
'sys_actions=%s -> (%s && (X(risk=0) <-> risk<=%d))' %
(actStr, riskstr, alldroprisk2[i - 1])
} # wait action keeps energy at same level (no energy used)
actboolStr = 'picAtS%dTaken' % i
locStr = 's%d' % i
sys_sws.actions.add(actStr)
sys_sws.transitions.add('s%d' % i, 's%d' % i, actions=actStr)
sys_vars.update({actboolStr: 'boolean'})
sys_init |= {'!%s' % actboolStr}
sys_safe |= {
'(energy>%d && loc=%s && sys_actions=%s) -> X(%s)' %
(alldropenergy2[i - 1], locStr, actStr, actboolStr)
}
sys_safe |= {
'(energy<=%d && loc=%s && sys_actions=%s) -> X(energy=0)' %
(alldropenergy2[i - 1], locStr, actStr)
}
sys_safe |= {
'(sys_actions!=%s && !%s) -> (X(!%s))' %
(actStr, actboolStr, actboolStr)
} # don't allow other actions to arbitrarily set this to True
sys_safe |= {'%s -> X(%s)' % (actboolStr, actboolStr)
} # if picture is taken, 'stays' taken
sys_prog |= {'picAtS2Taken'} # goal --> trying to take picture at s2
# 0 1 2 3 4
# atakesample#
alldropenergy3 = [1, 1, 1, 1, 1]
alldroprisk3 = [0, 0, 0, 0, 0]
for i in range(1, 5 + 1): # [1] atakepicture1,picAtS1Taken, ...
actStr = 'atakesample%d' % i
energystr = dropStr('energy', energylo, energyhi,
alldropenergy3[i - 1])
sys_safe |= {
'sys_actions=%s -> (%s && (X(energy=0) <-> energy<=%d))' %
(actStr, energystr, alldropenergy3[i - 1])
} # wait action keeps energy at same level (no energy used)
riskstr = dropStr('risk', risklo, riskhi, alldroprisk3[i - 1])
sys_safe |= {
'sys_actions=%s -> (%s && (X(risk=0) <-> risk<=%d))' %
(actStr, riskstr, alldroprisk3[i - 1])
} # wait action keeps energy at same level (no energy used)
actboolStr = 'samAtS%dTaken' % i
locStr = 's%d' % i
sys_sws.actions.add(actStr)
sys_sws.transitions.add('s%d' % i, 's%d' % i, actions=actStr)
sys_vars.update({actboolStr: 'boolean'})
sys_init |= {'!%s' % actboolStr}
sys_safe |= {
'(energy>%d && loc=%s && sys_actions=%s) -> X(%s)' %
(alldropenergy3[i - 1], locStr, actStr, actboolStr)
}
sys_safe |= {
'(energy<=%d && loc=%s && sys_actions=%s) -> X(energy=0)' %
(alldropenergy3[i - 1], locStr, actStr)
}
sys_safe |= {
'(sys_actions!=%s && !%s) -> (X(!%s))' %
(actStr, actboolStr, actboolStr)
} # don't allow other actions to arbitrarily set this to True
sys_safe |= {'%s -> X(%s)' % (actboolStr, actboolStr)
} # if sample is taken, 'stays' taken
#sys_prog |= {'samAtS5Taken'} # goal --> trying to take sample at s5
#
# after all sys_goal specs are written...
#
goal_conditions = ''
for goalpieceStr in list(sys_prog):
goal_conditions += goalpieceStr + ' && '
goal_conditions = goal_conditions[0:len(goal_conditions) -
4] # remove trailing ' && '
# set up stepcounter at the end of everything, after all sys_goal specs are written:
steplo = 0
stephi = 8 # lower this number to try and force gr1c to be more efficient
sys_vars.update({'stepCounter': (steplo, stephi)})
sys_init |= {'stepCounter=%d' % steplo}
stepstr = riseStr('stepCounter', steplo, stephi, 1)
sys_safe |= {
'!(%s) -> %s' % (goal_conditions, stepstr)
} # goal_conditions not met implies stepCounter increases by 1 each time
stepstr = riseStr('stepCounter', steplo, stephi, 0)
sys_safe |= {
'(%s) -> %s' % (goal_conditions, stepstr)
} # goal_conditions met implies stepCounter doesn't increase (any more)
# then lower stephi to try and force gr1c to find a more efficient (shortest number of actions) solution
sys_safe |= {
'stepCounter < %d' % (stephi)
} # must keep counter below stephi; requires below that we stop counting steps after we finish all goals
# add this in so we can tell when we're just doing extra stuff post-whatever
sys_vars.update({'sysgoalsReached': 'boolean'})
sys_init |= {'!sysgoalsReached'}
sys_safe |= {'!(%s) <-> !sysgoalsReached' % (goal_conditions)
} # goal_conditions not met implies sysgoals(not_yet)Reached
sys_safe |= {'(%s) <-> sysgoalsReached' % (goal_conditions)
} # goal_conditions met implies sysgoalsReached
# changes might've been made this far down, so show again...
print(
sys_sws
) # show the Finite Transition System, make sure it was encoded properly
sys_sws.save('deliberative_%sb.pdf' %
ver) # save the visual diagram of the FTS, for same reason
print("Done saving deliberative_%sb.pdf" % ver)
print("Creating spec for sys_sws system")
# Create the specification
specs = spec.GRSpec(env_vars=env_vars,
sys_vars=sys_vars,
env_init=env_init,
sys_init=sys_init,
env_safety=env_safe,
sys_safety=sys_safe,
env_prog=env_prog,
sys_prog=sys_prog)
print(specs.pretty())
# GRSpec(env_vars=None, sys_vars=None, env_init='', sys_init='', env_safety='', sys_safety='', env_prog='', sys_prog='')
# (env_init & []env_safety & []<>env_prog_1 & []<>env_prog_2 & ...)
# -> (sys_init & []sys_safety & []<>sys_prog_1 & []<>sys_prog_2 & ...)
#
# C{env_vars}: alias for C{input_variables} of L{LTL}, concerning variables that are determined by the environment
# C{env_init}: a list of string that specifies the assumption about the initial state of the environment.
# C{env_safety}: a list of string that specifies the assumption about the evolution of the environment state.
# C{env_prog}: a list of string that specifies the justice assumption on the environment.
# C{sys_vars}: alias for C{output_variables} of L{LTL}, concerning variables that are controlled by the system.
# C{sys_init}: a list of string that specifies the requirement on the initial state of the system.
# C{sys_safety}: a list of string that specifies the safety requirement.
# C{sys_prog}: a list of string that specifies the progress requirement.
print("Done creating spec for sys_sws system")
# Controller synthesis
#
# At this point we can synthesize the controller using one of the available
# methods. Here we make use of gr1c.
#
print("Synthesizing solution for sys_sws system")
ctrl = synth.synthesize('gr1c', specs, sys=sys_sws)
print("Done synthesizing solution for sys_sws system")
print("Creating .png file for sys_sws system")
if ctrl is None:
print(
"Got gr1c error, not attempting save =or= print-to-screen =or= MealyMachine dumpsmach"
)
else:
# Generate a graphical representation of the controller for viewing
if not ctrl.save('deliberative_%s_sws.png' % ver):
print("Couldn't save .png file, printing ctrl instead")
print(ctrl)
print("Done printing ctrl instead")
print("Done creating .png file for sys_sws system")
print("Writing MealyMachine out via dumpsmach")
# ctrl is a MealyMachine
from tulip import dumpsmach
dumpsmach.write_python_case(filename='dumpsmachtest_dlap%s.py' % ver,
M=ctrl,
classname="TulipStrategy",
start='Sinit')
print("Done writing MealyMachine out to dumpsmachtest_dlap%s.py" % ver)
def test_var_name_conflicts():
"""Check redefinitions between states, actions, atomic props."""
def conversion_raises(f, ofts):
with assert_raises(AssertionError):
f(ofts, ignore_initial=True,
statevar='loc', bool_actions=False)
# FTS to spec
# states vs APs
sys = transys.FTS()
sys.states.add('out')
sys.atomic_propositions.add('out')
conversion_raises(synth.sys_to_spec, sys)
# states vs sys_actions
sys = transys.FTS()
sys.states.add('out')
sys.sys_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys = transys.FTS()
sys.states.add('sys_actions')
sys.sys_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
# states vs env_actions
env = transys.FTS()
env.states.add('out')
env.env_actions.add('out')
env.owner = 'env'
conversion_raises(synth.env_to_spec, env)
env = transys.FTS()
env.states.add('env_actions')
env.env_actions.add('out')
env.owner = 'env'
conversion_raises(synth.env_to_spec, env)
# APs vs sys_actions
sys = transys.FTS()
sys.states.add('s0')
sys.atomic_propositions.add('out')
sys.env_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys = transys.FTS()
sys.states.add('s0')
sys.atomic_propositions.add('sys_actions')
sys.env_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
# APs vs env_actions
env = transys.FTS()
env.states.add('s0')
env.atomic_propositions.add('out')
env.env_actions.add('out')
env.owner = 'env'
conversion_raises(synth.env_to_spec, env)
env = transys.FTS()
env.states.add('s0')
env.atomic_propositions.add('env_actions')
env.env_actions.add('out')
env.owner = 'env'
conversion_raises(synth.env_to_spec, env)
# OpenFTS to spec
# states vs APs
sys = transys.FTS()
sys.states.add('out')
sys.atomic_propositions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
# states vs sys_actions
sys = transys.FTS()
sys.states.add('out')
sys.sys_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
sys = transys.FTS()
sys.states.add('sys_actions')
sys.sys_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
# states vs env_actions
sys = transys.FTS()
sys.states.add('out')
sys.env_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
sys = transys.FTS()
sys.states.add('env_actions')
sys.env_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
# sys_actions vs APs
sys = transys.FTS()
sys.states.add('s0')
sys.sys_actions.add('out')
sys.atomic_propositions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
sys = transys.FTS()
sys.states.add('s0')
sys.sys_actions.add('out')
sys.atomic_propositions.add('sys_actions')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
# env_actions vs APs
sys = transys.FTS()
sys.states.add('s0')
sys.env_actions.add('out')
sys.atomic_propositions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
sys = transys.FTS()
sys.states.add('s0')
sys.env_actions.add('out')
sys.atomic_propositions.add('env_actions')
conversion_raises(synth.sys_to_spec, sys)
sys.owner = 'env'
conversion_raises(synth.env_to_spec, sys)
# NO, 26 Jul 2013.
import numpy as np
from scipy import sparse as sp
from tulip import spec
from tulip import synth
from tulip import transys
###############################
# Switched system with 4 modes:
###############################
# In this scenario we have limited actions "left, right, up, down" with
# certain (nondeterministic) outcomes
# Create a finite transition system
sys_sws = transys.FTS()
sys_sws.sys_actions.add_from({'right', 'up', 'left', 'down'})
# str states
n = 6
states = transys.prepend_with(range(n), 's')
sys_sws.states.add_from(set(states))
sys_sws.states.initial.add_from({'s0', 's3'})
sys_sws.atomic_propositions.add_from(['home', 'lot'])
state_labels = [{'home'}, set(), set(), set(), set(), {'lot'}]
# Add states and decorate TS with state labels (aka atomic propositions)
for state, label in zip(states, state_labels):
sys_sws.states.add(state, ap=label)
def test_var_name_conflicts():
"""Check redefinitions between states, actions, atomic props."""
conversion_raises = lambda x, y: assert_raises(
Exception, spec=x, sys=y,
ignore_initial=True,
statevar='loc',
bool_actions=False)
# FTS to spec
# states vs APs
sys = transys.FTS()
sys.states.add('out')
sys.atomic_propositions.add('out')
conversion_raises(synth.sys_to_spec, sys)
# states vs sys_actions
sys = transys.FTS()
sys.states.add('out')
sys.sys_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys = transys.FTS()
sys.states.add('sys_actions')
sys.sys_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
# states vs env_actions
env = transys.FTS()
env.states.add('out')
env.env_actions.add('out')
conversion_raises(synth.env_to_spec, env)
env = transys.FTS()
env.states.add('env_actions')
env.env_actions.add('out')
conversion_raises(synth.env_to_spec, env)
# APs vs sys_actions
sys = transys.FTS()
sys.states.add('s0')
sys.atomic_propositions.add('out')
sys.env_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
sys = transys.FTS()
sys.states.add('s0')
sys.atomic_propositions.add('sys_actions')
sys.env_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
# APs vs env_actions
env = transys.FTS()
env.states.add('s0')
env.atomic_propositions.add('out')
env.env_actions.add('out')
conversion_raises(synth.env_to_spec, env)
env = transys.FTS()
env.states.add('s0')
env.atomic_propositions.add('env_actions')
env.env_actions.add('out')
conversion_raises(synth.env_to_spec, env)
# OpenFTS to spec
# states vs APs
sys = transys.FTS()
sys.states.add('out')
sys.atomic_propositions.add('out')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
# states vs sys_actions
sys = transys.FTS()
sys.states.add('out')
sys.sys_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
sys = transys.FTS()
sys.states.add('sys_actions')
sys.sys_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
# states vs env_actions
sys = transys.FTS()
sys.states.add('out')
sys.env_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
sys = transys.FTS()
sys.states.add('env_actions')
sys.env_actions.add('out')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
# sys_actions vs APs
sys = transys.FTS()
sys.states.add('s0')
sys.sys_actions.add('out')
sys.atomic_propositions.add('out')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
sys = transys.FTS()
sys.states.add('s0')
sys.sys_actions.add('out')
sys.atomic_propositions.add('sys_actions')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
# env_actions vs APs
sys = transys.FTS()
sys.states.add('s0')
sys.env_actions.add('out')
sys.atomic_propositions.add('out')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
sys = transys.FTS()
sys.states.add('s0')
sys.env_actions.add('out')
sys.atomic_propositions.add('env_actions')
conversion_raises(synth.sys_to_spec, sys)
conversion_raises(synth.env_to_spec, sys)
def full_road_ex():
import discretize
from tulip import transys
sys = transys.FTS()
road(sys, 0, 0, 0, 5, 0.4)
road(sys, 0, 5, 5, 5, 0.4)
road(sys, 5, 5, 5, 0, 0.4)
road(sys, 5, 0, 0, 0, 0.4)
add_states(['Xequal0spaceYequal0spacephiequal' + str(3)], sys)
#print sys.states()
add_transitions(['Xequal0spaceYequal3.75spacephiequal' + str(2)],
['Xequal1.25spaceYequal5spacephiequal' + str(0)], sys)
add_transitions(['Xequal3.75spaceYequal5spacephiequal' + str(0)],
['Xequal5spaceYequal3.75spacephiequal' + '6'], sys)
add_transitions(['Xequal5spaceYequal1.25spacephiequal' + '6'],
['Xequal3.75spaceYequal0spacephiequal' + str(4)], sys)
add_transitions(['Xequal1.25spaceYequal0spacephiequal' + str(4)],
['Xequal0spaceYequal1.25spacephiequal' + str(2)], sys)
add_transitions(['Xequal0spaceYequal0spacephiequal' + str(3)],
['Xequal0spaceYequal0spacephiequal' + str(3)], sys)
add_transitions(['Xequal0spaceYequal0spacephiequal' + str(3)],
['Xequal0spaceYequal1.25spacephiequal' + str(2)], sys)
add_states(['Xequal1.25spaceYequal2.5spacephiequal' + str(0)], sys)
add_transitions(['Xequal0spaceYequal1.25spacephiequal' + str(2)],
['Xequal1.25spaceYequal2.5spacephiequal' + str(0)], sys)
add_transitions(['Xequal1.25spaceYequal2.5spacephiequal' + str(0)],
['Xequal1.25spaceYequal2.5spacephiequal' + str(0)], sys)
add_transitions(['Xequal1.25spaceYequal2.5spacephiequal' + str(0)],
['Xequal0spaceYequal1.25spacephiequal' + str(2)], sys)
add_states(['Xequalmmm1.25spaceYequal2.5spacephiequal' + str(4)], sys)
add_transitions(['Xequal0spaceYequal1.25spacephiequal' + str(2)],
['Xequalmmm1.25spaceYequal2.5spacephiequal' + str(4)], sys)
add_transitions(['Xequalmmm1.25spaceYequal2.5spacephiequal' + str(4)],
['Xequalmmm1.25spaceYequal2.5spacephiequal' + str(4)], sys)
add_transitions(['Xequalmmm1.25spaceYequal2.5spacephiequal' + str(4)],
['Xequal0spaceYequal1.25spacephiequal' + str(2)], sys)
add_states(['Xequal2.5spaceYequal6.25spacephiequal' + str(2)], sys)
add_transitions(['Xequal1.25spaceYequal5spacephiequal' + str(0)],
['Xequal2.5spaceYequal6.25spacephiequal' + str(2)], sys)
add_transitions(['Xequal2.5spaceYequal6.25spacephiequal' + str(2)],
['Xequal2.5spaceYequal6.25spacephiequal' + str(2)], sys)
add_transitions(['Xequal2.5spaceYequal6.25spacephiequal' + str(2)],
['Xequal1.25spaceYequal5spacephiequal' + str(0)], sys)
add_states(['Xequal2.5spaceYequal3.75spacephiequal' + str(6)], sys)
add_transitions(['Xequal1.25spaceYequal5spacephiequal' + str(0)],
['Xequal2.5spaceYequal3.75spacephiequal' + str(6)], sys)
add_transitions(['Xequal2.5spaceYequal3.75spacephiequal' + str(6)],
['Xequal2.5spaceYequal3.75spacephiequal' + str(6)], sys)
add_transitions(['Xequal2.5spaceYequal3.75spacephiequal' + str(6)],
['Xequal1.25spaceYequal5spacephiequal' + str(0)], sys)
add_states(['Xequal6.25spaceYequal2.5spacephiequal' + str(0)], sys)
add_transitions(['Xequal5spaceYequal3.75spacephiequal' + str(6)],
['Xequal6.25spaceYequal2.5spacephiequal' + str(0)], sys)
add_transitions(['Xequal6.25spaceYequal2.5spacephiequal' + str(0)],
['Xequal6.25spaceYequal2.5spacephiequal' + str(0)], sys)
add_transitions(['Xequal6.25spaceYequal2.5spacephiequal' + str(0)],
['Xequal5spaceYequal3.75spacephiequal' + str(6)], sys)
add_states(['Xequal3.75spaceYequal2.5spacephiequal' + str(4)], sys)
add_transitions(['Xequal5spaceYequal3.75spacephiequal' + str(6)],
['Xequal3.75spaceYequal2.5spacephiequal' + str(4)], sys)
add_transitions(['Xequal3.75spaceYequal2.5spacephiequal' + str(4)],
['Xequal3.75spaceYequal2.5spacephiequal' + str(4)], sys)
add_transitions(['Xequal3.75spaceYequal2.5spacephiequal' + str(4)],
['Xequal5spaceYequal3.75spacephiequal' + str(6)], sys)
add_states(['Xequal2.5spaceYequal1.25spacephiequal' + str(2)], sys)
add_transitions(['Xequal3.75spaceYequal0spacephiequal' + str(4)],
['Xequal2.5spaceYequal1.25spacephiequal' + str(2)], sys)
add_transitions(['Xequal2.5spaceYequal1.25spacephiequal' + str(2)],
['Xequal2.5spaceYequal1.25spacephiequal' + str(2)], sys)
add_transitions(['Xequal2.5spaceYequal1.25spacephiequal' + str(2)],
['Xequal3.75spaceYequal0spacephiequal' + str(4)], sys)
add_states(['Xequal2.5spaceYequalmmm1.25spacephiequal' + str(6)], sys)
add_transitions(['Xequal3.75spaceYequal0spacephiequal' + str(4)],
['Xequal2.5spaceYequalmmm1.25spacephiequal' + str(6)], sys)
add_transitions(['Xequal2.5spaceYequalmmm1.25spacephiequal' + str(6)],
['Xequal2.5spaceYequalmmm1.25spacephiequal' + str(6)], sys)
add_transitions(['Xequal2.5spaceYequalmmm1.25spacephiequal' + str(6)],
['Xequal3.75spaceYequal0spacephiequal' + str(4)], sys)
sys.atomic_propositions.add_from({'pSpace'})
sys.states.add('Xequal1.25spaceYequal2.5spacephiequal' + str(0),
ap={'pSpace'})
sys.states.add('Xequalmmm1.25spaceYequal2.5spacephiequal' + str(4),
ap={'pSpace'})
sys.states.add('Xequal2.5spaceYequal6.25spacephiequal' + str(2),
ap={'pSpace'})
sys.states.add('Xequal2.5spaceYequal3.75spacephiequal' + str(6),
ap={'pSpace'})
sys.states.add('Xequal6.25spaceYequal2.5spacephiequal' + str(0),
ap={'pSpace'})
sys.states.add('Xequal3.75spaceYequal2.5spacephiequal' + str(4),
ap={'pSpace'})
sys.states.add('Xequal2.5spaceYequal1.25spacephiequal' + str(2),
ap={'pSpace'})
sys.states.add('Xequal2.5spaceYequalmmm1.25spacephiequal' + str(6),
ap={'pSpace'})
return sys
