def create(self):
profiles = []
#Line aus den Textboxwerten erstellen
if self.settings.modeLine == enumModeLine.straightLine:
profiles.append(
self.processFeature(None, 1, 1,
self.settings.mapData.customLine))
return profiles
#Line aus gezeichneter Linie erstellen
if self.settings.modeLine == enumModeLine.customLine:
profiles.append(
self.processFeature(None, 1, 1,
self.settings.mapData.customLine))
return profiles
#Shapefile Geometrien abarbeiten
if self.settings.modeLine == enumModeLine.line:
#feat = QgsFeature()
#if self.settings.onlySelectedFeatures is True:
# for feat in self.settings.mapData.selectedLineLyr.line.selectedFeatures():
# profiles.append(self.processFeature(len(profiles) + 1,
# self.settings.mapData.selectedLineLyr.line.id(),
# feat
# )
# )
#else:
# provider = self.settings.mapData.selectedLineLyr.line.dataProvider()
# attrIndices = provider.attributeIndexes()
# provider.select(attrIndices)
# while (provider.nextFeature(feat)):
# #QgsMessageLog.logMessage(str(self.settings.mapData.selectedLineLyr.line.id()), 'VoGis')
# profiles.append(self.processFeature(len(profiles) + 1,
# self.settings.mapData.selectedLineLyr.line.id(),
# feat
# )
# )
provider = self.settings.mapData.selectedLineLyr.line.dataProvider(
)
feats = []
#Alle Attribute holen
if QGis.QGIS_VERSION_INT < 10900:
provider.select(provider.attributeIndexes())
if self.settings.onlySelectedFeatures is True:
feats = self.settings.mapData.selectedLineLyr.line.selectedFeatures(
)
else:
if QGis.QGIS_VERSION_INT < 10900:
attrIndices = provider.attributeIndexes()
provider.select(attrIndices)
feat = QgsFeature()
while (provider.nextFeature(feat)):
#geom = feat.geometry()
#QgsMessageLog.logMessage( 'isMultipart: {0}'.format(str(geom.isMultipart())), 'VoGis')
#attrs = feat.attributeMap()
# attrs is a dictionary: key = field index, value = QgsFeatureAttribute
# show all attributes and their values
#for (k, attr) in feat.attributeMap().iteritems():
# QgsMessageLog.logMessage('{0}: {1}'.format(k, attr.toString()), 'VoGis')
feats.append(feat)
#neues Feature verwenden, weil sonst die Multiparts
#nicht als solche erkannt werden
feat = QgsFeature()
else:
QgsMessageLog.logMessage('PROVIDER SELECT', 'VoGis')
#processing.getfeatures: This will iterate over all the features in the layer, in case there is no selection, or over the selected features otherwise.
#obviously not available with windows standalone installer
#features = processing.getfeatures(self.settings.mapData.selectedLineLyr.line)
features = self.settings.mapData.selectedLineLyr.line.getFeatures(
)
for feat in features:
feats.append(feat)
#for feat in feats:
# if feat.isValid() is False:
# return []
ut = Util(self.iface)
feats, err_msg = ut.prepareFeatures(self.settings, provider, feats)
if not err_msg is None:
#QMessageBox.critical(self.iface.mainWindow(), "VoGIS-Profiltool", err_msg)
QMessageBox.critical(self.iface.mainWindow(), 'PREPARE ERROR',
err_msg)
return []
for f in feats:
geom = f.geometry()
if geom.isMultipart():
msg = QApplication.translate(
'code',
'Multipart Feature vorhanden! Option zum Explodieren verwenden.',
None, QApplication.UnicodeUTF8)
QMessageBox.warning(self.iface.mainWindow(),
"VoGIS-Profiltool", msg)
return profiles
featCnt = len(feats)
for idx, feat in enumerate(feats):
#QGIS 2.0 http://gis.stackexchange.com/a/58754 http://gis.stackexchange.com/a/57090
#http://acaciaecho.wordpress.com/2011/01/11/pyqtprogressbar/
self.iface.mainWindow().statusBar().showMessage(
'VoGIS-Profiltool, Element: {0}/{1}'.format(idx, featCnt))
profiles.append(
self.processFeature(
provider.fields(),
len(profiles) + 1,
self.settings.mapData.selectedLineLyr.line.id(), feat))
#QGIS 2.0 http://gis.stackexchange.com/a/58754 http://gis.stackexchange.com/a/57090
self.iface.mainWindow().statusBar().showMessage(
'VoGIS-Profiltool, {0} Profile'.format(len(profiles)))
return profiles
class CreateProfile(QObject):
def __init__(self, interface, settings):
QObject.__init__(self)
self.iface = interface
self.settings = settings
self.stop = False
self.util = Util(self.iface)
self.intersections = []
def abort(self):
self.stop = True
finished = pyqtSignal(object, object)
error = pyqtSignal(basestring)
progress = pyqtSignal(basestring)
def create(self):
profiles = []
try:
#Line aus den Textboxwerten erstellen
if self.settings.modeLine == enumModeLine.straightLine:
profiles.append(
self.processFeature(None, 1, 1,
self.settings.mapData.customLine))
self.finished.emit(profiles, self.intersections)
return
#Line aus gezeichneter Linie erstellen
if self.settings.modeLine == enumModeLine.customLine:
profiles.append(
self.processFeature(None, 1, 1,
self.settings.mapData.customLine))
self.finished.emit(profiles, self.intersections)
return
#Shapefile Geometrien abarbeiten
if self.settings.modeLine == enumModeLine.line:
provider = self.settings.mapData.selectedLineLyr.line.dataProvider(
)
feats = []
#Alle Attribute holen
if QGis.QGIS_VERSION_INT < 10900:
provider.select(provider.attributeIndexes())
if self.settings.onlySelectedFeatures is True:
feats = self.settings.mapData.selectedLineLyr.line.selectedFeatures(
)
else:
if QGis.QGIS_VERSION_INT < 10900:
attrib_indices = provider.attributeIndexes()
provider.select(attrib_indices)
feat = QgsFeature()
while provider.nextFeature(feat):
feats.append(feat)
#neues Feature verwenden, weil sonst die Multiparts
#nicht als solche erkannt werden
feat = QgsFeature()
else:
#processing.getfeatures: This will iterate over all the features in the layer, in case there is no selection, or over the selected features otherwise.
#obviously not available with windows standalone installer
#features = processing.getfeatures(self.settings.mapData.selectedLineLyr.line)
features = self.settings.mapData.selectedLineLyr.line.getFeatures(
)
for feat in features:
feats.append(feat)
feats, err_msg = self.util.prepareFeatures(
self.settings, provider, feats)
if not err_msg is None:
#QMessageBox.critical(self.iface.mainWindow(), 'PREPARE ERROR', err_msg)
self.error.emit(err_msg)
self.finished.emit([], [])
return
for feat in feats:
geom = feat.geometry()
if geom.isMultipart():
msg = QApplication.translate(
'code',
'Multipart Feature vorhanden! Option zum Explodieren verwenden.',
None, QApplication.UnicodeUTF8)
self.error.emit(msg)
self.finished.emit([], [])
return
feat_cnt = len(feats)
for idx, feat in enumerate(feats):
if self.stop is True:
profiles = []
break
if idx == 0 or idx % 5 == 0:
msg = 'Profil {0}/{1}'.format(idx + 1, feat_cnt)
self.progress.emit(msg)
profiles.append(
self.processFeature(
provider.fields(),
len(profiles) + 1,
self.settings.mapData.selectedLineLyr.line.id(),
feat))
msg = 'Profil {0}/{1}'.format(idx + 1, feat_cnt)
self.progress.emit(msg)
self.finished.emit(profiles, self.intersections)
except Exception, ex:
self.error.emit(traceback.format_exc())
self.finished.emit([], [])
def create(self):
profiles = []
#Line aus den Textboxwerten erstellen
if self.settings.modeLine == enumModeLine.straightLine:
profiles.append(self.processFeature(None,
1,
1,
self.settings.mapData.customLine
)
)
return profiles
#Line aus gezeichneter Linie erstellen
if self.settings.modeLine == enumModeLine.customLine:
profiles.append(self.processFeature(None,
1,
1,
self.settings.mapData.customLine
)
)
return profiles
#Shapefile Geometrien abarbeiten
if self.settings.modeLine == enumModeLine.line:
#feat = QgsFeature()
#if self.settings.onlySelectedFeatures is True:
# for feat in self.settings.mapData.selectedLineLyr.line.selectedFeatures():
# profiles.append(self.processFeature(len(profiles) + 1,
# self.settings.mapData.selectedLineLyr.line.id(),
# feat
# )
# )
#else:
# provider = self.settings.mapData.selectedLineLyr.line.dataProvider()
# attrIndices = provider.attributeIndexes()
# provider.select(attrIndices)
# while (provider.nextFeature(feat)):
# #QgsMessageLog.logMessage(str(self.settings.mapData.selectedLineLyr.line.id()), 'VoGis')
# profiles.append(self.processFeature(len(profiles) + 1,
# self.settings.mapData.selectedLineLyr.line.id(),
# feat
# )
# )
provider = self.settings.mapData.selectedLineLyr.line.dataProvider()
feats = []
#Alle Attribute holen
if QGis.QGIS_VERSION_INT < 10900: provider.select(provider.attributeIndexes())
if self.settings.onlySelectedFeatures is True:
feats = self.settings.mapData.selectedLineLyr.line.selectedFeatures()
else:
if QGis.QGIS_VERSION_INT < 10900:
attrIndices = provider.attributeIndexes()
provider.select(attrIndices)
feat = QgsFeature()
while (provider.nextFeature(feat)):
#geom = feat.geometry()
#QgsMessageLog.logMessage( 'isMultipart: {0}'.format(str(geom.isMultipart())), 'VoGis')
#attrs = feat.attributeMap()
# attrs is a dictionary: key = field index, value = QgsFeatureAttribute
# show all attributes and their values
#for (k, attr) in feat.attributeMap().iteritems():
# QgsMessageLog.logMessage('{0}: {1}'.format(k, attr.toString()), 'VoGis')
feats.append(feat)
#neues Feature verwenden, weil sonst die Multiparts
#nicht als solche erkannt werden
feat = QgsFeature()
else:
QgsMessageLog.logMessage('PROVIDER SELECT', 'VoGis')
#processing.getfeatures: This will iterate over all the features in the layer, in case there is no selection, or over the selected features otherwise.
#obviously not available with windows standalone installer
#features = processing.getfeatures(self.settings.mapData.selectedLineLyr.line)
features = self.settings.mapData.selectedLineLyr.line.getFeatures()
for feat in features:
feats.append(feat)
#for feat in feats:
# if feat.isValid() is False:
# return []
ut = Util(self.iface)
feats, err_msg = ut.prepareFeatures(self.settings, provider, feats)
if not err_msg is None:
#QMessageBox.critical(self.iface.mainWindow(), "VoGIS-Profiltool", err_msg)
QMessageBox.critical(self.iface.mainWindow(), 'PREPARE ERROR', err_msg)
return []
for f in feats:
geom = f.geometry()
if geom.isMultipart():
msg = QApplication.translate('code', 'Multipart Feature vorhanden! Option zum Explodieren verwenden.', None, QApplication.UnicodeUTF8)
QMessageBox.warning(self.iface.mainWindow(), "VoGIS-Profiltool", msg)
return profiles
featCnt = len(feats)
for idx, feat in enumerate(feats):
#QGIS 2.0 http://gis.stackexchange.com/a/58754 http://gis.stackexchange.com/a/57090
#http://acaciaecho.wordpress.com/2011/01/11/pyqtprogressbar/
self.iface.mainWindow().statusBar().showMessage('VoGIS-Profiltool, Element: {0}/{1}'.format(idx, featCnt))
profiles.append(self.processFeature(provider.fields(),
len(profiles) + 1,
self.settings.mapData.selectedLineLyr.line.id(),
feat
)
)
#QGIS 2.0 http://gis.stackexchange.com/a/58754 http://gis.stackexchange.com/a/57090
self.iface.mainWindow().statusBar().showMessage('VoGIS-Profiltool, {0} Profile'.format(len(profiles)))
return profiles
class CreateProfile(QObject):
def __init__(self, interface, settings):
QObject.__init__(self)
self.iface = interface
self.settings = settings
self.stop = False
self.util = Util(self.iface)
self.intersections = []
def abort(self):
self.stop = True
finished = pyqtSignal(object, object)
error = pyqtSignal(basestring)
progress = pyqtSignal(basestring)
def create(self):
profiles = []
try:
#Line aus den Textboxwerten erstellen
if self.settings.modeLine == enumModeLine.straightLine:
profiles.append(self.processFeature(None,
1,
1,
self.settings.mapData.customLine
)
)
self.finished.emit(profiles, self.intersections)
return
#Line aus gezeichneter Linie erstellen
if self.settings.modeLine == enumModeLine.customLine:
profiles.append(self.processFeature(None,
1,
1,
self.settings.mapData.customLine
)
)
self.finished.emit(profiles, self.intersections)
return
#Shapefile Geometrien abarbeiten
if self.settings.modeLine == enumModeLine.line:
provider = self.settings.mapData.selectedLineLyr.line.dataProvider()
feats = []
#Alle Attribute holen
if QGis.QGIS_VERSION_INT < 10900:
provider.select(provider.attributeIndexes())
if self.settings.onlySelectedFeatures is True:
feats = self.settings.mapData.selectedLineLyr.line.selectedFeatures()
else:
if QGis.QGIS_VERSION_INT < 10900:
attrib_indices = provider.attributeIndexes()
provider.select(attrib_indices)
feat = QgsFeature()
while provider.nextFeature(feat):
feats.append(feat)
#neues Feature verwenden, weil sonst die Multiparts
#nicht als solche erkannt werden
feat = QgsFeature()
else:
#processing.getfeatures: This will iterate over all the features in the layer, in case there is no selection, or over the selected features otherwise.
#obviously not available with windows standalone installer
#features = processing.getfeatures(self.settings.mapData.selectedLineLyr.line)
features = self.settings.mapData.selectedLineLyr.line.getFeatures()
for feat in features:
feats.append(feat)
feats, err_msg = self.util.prepareFeatures(self.settings, provider, feats)
if not err_msg is None:
#QMessageBox.critical(self.iface.mainWindow(), 'PREPARE ERROR', err_msg)
self.error.emit(err_msg)
self.finished.emit([], [])
return
for feat in feats:
geom = feat.geometry()
if geom.isMultipart():
msg = QApplication.translate('code', 'Multipart Feature vorhanden! Option zum Explodieren verwenden.', None, QApplication.UnicodeUTF8)
self.error.emit(msg)
self.finished.emit([], [])
return
feat_cnt = len(feats)
for idx, feat in enumerate(feats):
if self.stop is True:
profiles = []
break
if idx == 0 or idx % 5 == 0:
msg = 'Profil {0}/{1}'.format(idx+1, feat_cnt)
self.progress.emit(msg)
profiles.append(self.processFeature(provider.fields(),
len(profiles) + 1,
self.settings.mapData.selectedLineLyr.line.id(),
feat
)
)
msg = 'Profil {0}/{1}'.format(idx+1, feat_cnt)
self.progress.emit(msg)
self.finished.emit(profiles, self.intersections)
except Exception, ex:
self.error.emit(traceback.format_exc())
self.finished.emit([], [])
