def __init__(self, callback, options):
gr.top_block.__init__(self)
self.source = uhd_receiver(
options.args,
options.bandwidth,
options.rx_freq,
options.rx_gain,
options.spec,
options.antenna,
options.verbose,
)
self.sink = uhd_transmitter(
options.args,
options.bandwidth,
options.tx_freq,
options.tx_gain,
options.spec,
options.antenna,
options.verbose,
)
self.txpath = transmit_path(options)
self.rxpath = receive_path(callback, options)
self.connect(self.txpath, self.sink)
self.connect(self.source, self.rxpath)
def __init__(self, options):
gr.top_block.__init__(self)
if options.outfile is not None:
u = gr.file_sink(gr.sizeof_gr_complex, options.outfile)
elif (options.tx_freq is not None) or (options.channel is not None):
if options.channel is not None:
self.chan_num = options.channel
options.tx_freq = ieee802_15_4_pkt.chan_802_15_4.chan_map[self.chan_num]
u = uhd_transmitter(options.tx_args,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose, options.external)
else:
raise SystemExit("--tx-freq, --channel or --outfile must be specified\n")
self.samples_per_symbol = 2
# transmitter
self.packet_transmitter = ieee802_15_4_pkt.ieee802_15_4_mod_pkts(self,
spb=self.samples_per_symbol, msgq_limit=2, log=options.log)
self.amp = gr.multiply_const_cc(1)
self.u = u
self.connect(self.packet_transmitter, self.amp, self.u)
self.connect(self.amp, gr.file_sink(gr.sizeof_gr_complex, 'cc2420-tx-diag.dat'))
def __init__(self, options, payload=''):
gr.top_block.__init__(self)
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
elif(options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
options.interp = 100e6/options.bandwidth # FTW-specific convertion
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
if(options.from_file is None):
self.txpath = ftw_transmit_path(options, payload)
else:
self.txpath = gr.file_source(gr.sizeof_gr_complex, options.from_file);
# options.tx_amplitude = 1
# static value to make sure we do not exceed +-1 for the floats being sent to the sink
self._tx_amplitude = options.tx_amplitude
self.amp = gr.multiply_const_cc(self._tx_amplitude)
# self.txpath = ftw_pnc_transmit_path(options, payload)
self.connect(self.txpath, self.amp, self.sink)
if options.log:
self.connect(self.txpath, gr.file_sink(gr.sizeof_gr_complex, 'ftw_benchmark.dat'))
def __init__(self, modulator_class, options):
gr.top_block.__init__(self)
self.txpath = transmit_path(modulator_class, options)
self.audio_rx = audio_rx(options.audio_input)
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.address, options.bitrate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.antenna, options.verbose)
options.samples_per_symbol = self.sink._sps
audio_rate = self.audio_rx.sample_rate
usrp_rate = self.sink.get_sample_rate()
rrate = usrp_rate / audio_rate
elif(options.to_file is not None):
self.sink = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
rrate = 1
else:
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
rrate = 1
self.resampler = filter.pfb.arb_resampler_ccf(rrate)
self.connect(self.audio_rx)
self.connect(self.txpath, self.resampler, self.sink)
def __init__(self, modulator_class, options):
gr.top_block.__init__(self)
self.txpath = transmit_path(modulator_class, options)
self.audio_rx = audio_rx(options.audio_input)
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.address, options.bitrate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.antenna, options.verbose)
options.samples_per_symbol = self.sink._sps
audio_rate = self.audio_rx.sample_rate
usrp_rate = self.sink.get_sample_rate()
rrate = usrp_rate / audio_rate
elif(options.to_file is not None):
self.sink = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
rrate = 1
else:
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
rrate = 1
self.resampler = filter.pfb.arb_resampler_ccf(rrate)
self.connect(self.audio_rx)
self.connect(self.txpath, self.resampler, self.sink)
def __init__(self, modulator,
options): # Get options from call, modulator and options
gr.top_block.__init__(self)
if (options.tx_freq is not None):
# Work-around to get the modulation's bits_per_symbol
args = modulator.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator(**args).bits_per_symbol()
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self.sink._sps
elif (options.to_file is not None):
sys.stderr.write(
("Saving samples to '%s'.\n\n" % (options.to_file)))
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
sys.stderr.write(
"No sink defined, dumping samples to null sink.\n\n")
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
# Pass options to transmitter, setup transmitter, pass to pointer self.txpath
self.txpath = transmit_path(modulator, options)
# Connect and construct flowgraph
self.connect(
self.txpath,
self.sink) #--> back to main, to enable realtime scheduling
def __init__(self, mod_class, demod_class,
rx_callback, options):
gr.top_block.__init__(self)
# Get the modulation's bits_per_symbol
args = mod_class.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / mod_class(**args).bits_per_symbol()
self.source = uhd_receiver(options.args, symbol_rate,
options.samples_per_symbol,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self.source._sps
self.txpath = transmit_path(mod_class, options)
self.rxpath = receive_path(demod_class, rx_callback, options)
self.connect(self.txpath, self.sink)
self.connect(self.source, self.rxpath)
def __init__(self, options, options_vr1, options_vr2):
gr.top_block.__init__(self)
if (options.file_sink is False):
print("Using USRP")
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.lo_offset,
options.tx_gain, options.spec,
options.antenna, options.clock_source,
options.verbose)
else:
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
vr_configs = []
vr_configs.append([options_vr1.freq, options_vr1.bandwidth])
vr_configs.append([options_vr2.freq, options_vr2.bandwidth])
hydra_sink = hydra.hydra_sink(2, options.fft_length,
int(options.tx_freq),
int(options.bandwidth), vr_configs)
self.vr1_source = zeromq.pull_source(gr.sizeof_gr_complex, 1,
'tcp://192.168.122.56:4000', 100,
False, -1)
self.vr2_source = zeromq.pull_source(gr.sizeof_gr_complex, 1,
'tcp://192.168.122.208:4001', 100,
False, -1)
self.connect(self.vr1_source, (hydra_sink, 0), self.sink)
self.connect(self.vr2_source, (hydra_sink, 1))
self.hydra = hydra_sink
self.xmlrpc_server = SimpleXMLRPCServer.SimpleXMLRPCServer(
("localhost", 12345), allow_none=True)
self.xmlrpc_server.register_instance(self)
threading.Thread(target=self.xmlrpc_server.serve_forever).start()
def _setup_sink(self, options):
self.symbol_rate=2; #for bpsk will edit the code later to set this automaticly based on the selected modulation scheme
self.sink = uhd_transmitter(options.args, self.symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
def __init__(self, modulator, options):
gr.top_block.__init__(self)
if(options.tx_freq is not None):
# Work-around to get the modulation's bits_per_symbol
args = modulator.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator(**args).bits_per_symbol()
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self.sink._sps
elif(options.to_file is not None):
sys.stderr.write(("Saving samples to '%s'.\n\n" % (options.to_file)))
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
sys.stderr.write("No sink defined, dumping samples to null sink.\n\n")
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(modulator, options)
self.connect(self.txpath, self.sink)
def __init__(self, mod_class, demod_class, rx_callback, options):
gr.top_block.__init__(self)
# Get the modulation's bits_per_symbol
args = mod_class.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / mod_class(**args).bits_per_symbol()
self.source = uhd_receiver(options.args, symbol_rate,
options.samples_per_symbol, options.rx_freq,
options.rx_gain, options.spec,
options.antenna, options.verbose)
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self.source._sps
self.txpath = transmit_path(mod_class, options)
self.rxpath = receive_path(demod_class, rx_callback, options)
self.connect(self.txpath, self.sink)
self.connect(self.source, self.rxpath)
def __init__(self, callback, options):
gr.top_block.__init__(self)
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args,
options.bandwidth, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
# elif(options.to_file is not None):
# self.sink = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
if(options.rx_freq is not None):
self.source = uhd_receiver(options.args,
options.bandwidth, options.rx_freq,
options.lo_offset, options.rx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
# elif(options.from_file is not None):
# self.source = blocks.file_source(gr.sizeof_gr_complex, options.from_file)
else:
self.source = blocks.null_source(gr.sizeof_gr_complex)
# Set up receive path
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.rxpath = receive_path(callback, options)
self.txpath = transmit_path(options)
self.connect(self.source, self.rxpath)
self.connect(self.txpath, self.sink)
def __init__(self, modulator, options):
gr.top_block.__init__(self)
if (options.tx_freq is not None):
# Work-around to get the modulation's bits_per_symbol
args = modulator.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator(**args).bits_per_symbol()
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.lo_offset,
options.tx_gain, options.spec,
options.antenna, options.clock_source,
options.verbose)
options.samples_per_symbol = self.sink._sps
elif (options.to_file is not None):
sys.stderr.write(
("Saving samples to '%s'.\n\n" % (options.to_file)))
self.sink = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
sys.stderr.write(
"No sink defined, dumping samples to null sink.\n\n")
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(modulator, options)
self.connect(self.txpath, self.sink)
def __init__(self, mod, options):
gr.top_block.__init__(self, "tx_mpsk")
self._modulator_class = mod
# Get mod_kwargs
mod_kwargs = self._modulator_class.extract_kwargs_from_options(options)
# transmitter
self._modulator = self._modulator_class(**mod_kwargs)
if (options.tx_freq is not None):
symbol_rate = options.bitrate / self._modulator.bits_per_symbol()
self._sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self._sink._sps
elif (options.to_file is not None):
self._sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self._sink = gr.null_sink(gr.sizeof_gr_complex)
self._transmitter = bert_transmit(self._modulator._constellation,
options.samples_per_symbol,
options.differential,
options.excess_bw,
gray_coded=True,
verbose=options.verbose,
log=options.log)
self.amp = gr.multiply_const_cc(options.amplitude)
self.connect(self._transmitter, self.amp, self._sink)
def __init__(self, options, payload=''):
gr.top_block.__init__(self)
if (options.tx_freq is not None):
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
elif (options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
options.interp = 100e6 / options.bandwidth # FTW-specific convertion
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
if (options.from_file is None):
self.txpath = ftw_transmit_path(options, payload)
else:
self.txpath = gr.file_source(gr.sizeof_gr_complex,
options.from_file)
# options.tx_amplitude = 1
# static value to make sure we do not exceed +-1 for the floats being sent to the sink
self._tx_amplitude = options.tx_amplitude
self.amp = gr.multiply_const_cc(self._tx_amplitude)
# self.txpath = ftw_pnc_transmit_path(options, payload)
self.connect(self.txpath, self.amp, self.sink)
if options.log:
self.connect(
self.txpath,
gr.file_sink(gr.sizeof_gr_complex, 'ftw_benchmark.dat'))
def __init__(self, callback, options):
gr.top_block.__init__(self)
if (options.rx_freq is not None):
self.source = uhd_receiver(options.args, options.bandwidth,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
elif (options.from_file is not None):
self.source = gr.file_source(gr.sizeof_gr_complex,
options.from_file)
else:
self.source = gr.null_source(gr.sizeof_gr_complex)
# Set up receive path
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
if (options.tx_freq is not None):
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
elif (options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
self.source.set_sample_rate(1500000) #rx sample rate
self.sink.set_sample_rate(640000)
self.rxpath = receive_path(callback, options)
self.txpath = transmit_path(options)
self.connect(self.source, self.rxpath)
self.connect(self.txpath, self.sink)
self.source.set_antenna("RX2")
global freq
freq = options.tx_freq # - 12e6
def __init__(self, options):
gr.top_block.__init__(self)
if options.outfile is not None:
u = gr.file_sink(gr.sizeof_gr_complex, options.outfile)
elif (options.tx_freq is not None) or (options.channel is not None):
if options.channel is not None:
self.chan_num = options.channel
options.tx_freq = ieee802_15_4_pkt.chan_802_15_4.chan_map[
self.chan_num]
u = uhd_transmitter(options.tx_args, options.bandwidth,
options.tx_freq, options.tx_gain, options.spec,
options.antenna, options.verbose,
options.external)
else:
raise SystemExit(
"--tx-freq, --channel or --outfile must be specified\n")
self.samples_per_symbol = 2
# transmitter
self.packet_transmitter = ieee802_15_4_pkt.ieee802_15_4_mod_pkts(
self, spb=self.samples_per_symbol, msgq_limit=2, log=options.log)
self.amp = gr.multiply_const_cc(1)
self.u = u
self.connect(self.packet_transmitter, self.amp, self.u)
self.connect(self.amp,
gr.file_sink(gr.sizeof_gr_complex, 'cc2420-tx-diag.dat'))
def __init__(self, modulator, demodulator, rx_callback, options):
gr.top_block.__init__(self)
#parameters to sense channe
#options.symbol_rate=2500000
#options.samples_per_symbol=2
#options.rx_freq=2500000000
#options.rx_gain=20
#options.chbw_factor=1
sense_symbol_rate=2500000
sense_samples_per_symbol=2
sense_rx_freq=2500000000
sense_rx_gain=20
options.chbw_factor=1
#options.samples_per_symbol,
#args = demodulator.extract_kwargs_from_options(options)
self.sensesource=uhd_receiver(options.args, sense_symbol_rate,
sense_samples_per_symbol,
sense_rx_freq, sense_rx_gain,
options.spec, options.antenna,
options.verbose)
if(options.tx_freq is not None):
# Work-around to get the modulation's bits_per_symbol
args = modulator.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator(**args).bits_per_symbol()
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self.sink._sps
elif(options.to_file is not None):
sys.stderr.write(("Saving samples to '%s'.\n\n" % (options.to_file)))
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
sys.stderr.write("No sink defined, dumping samples to null sink.\n\n")
self.sink = gr.null_sink(gr.sizeof_gr_complex)
self.txgate = gr.copy(gr.sizeof_gr_complex)
self.sensegate = gr.copy(gr.sizeof_gr_complex)
#self.msgq = gr.msg_queue()
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(modulator, options)
self.connect(self.txpath, self.txgate, self.sink)
# do sense
self.sensepath = sensing_path(options)
self.tx_enabled = True
self.sense_flag=False
self.connect(self.sensesource, self.sensepath)
def __init__(self, callback, options):
gr.top_block.__init__(self)
### Rx Side ###
if(options.rx_freq is not None):
self.source = uhd_receiver(options.args_rx,
options.bandwidth,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
elif(options.from_file is not None):
self.source = gr.file_source(gr.sizeof_gr_complex, options.from_file)
else:
self.source = gr.null_source(gr.sizeof_gr_complex)
# Set up receive path
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.rxpath = receive_path(callback, options)
## Tx Side ###
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args_tx,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
elif(options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
# self.txpath = gr.message_source(gr.sizeof_gr_complex, 3)
# nco_sensitivity = 2.0/options.fft_length # correct for fine frequency
# self.nco = ftw.pnc_frequency_modulator_fc(nco_sensitivity)
# self.connect(self.txpath, self.sink) # self.nco,
# if you use two USRPs and want to synchonized
# need to change uhd_interface.py
# self.source.config_mimo()
# time.sleep(1) # to make sync stable
if options.debug:
self.connect(self.source, gr.file_sink(gr.sizeof_gr_complex, 'rx.dat')) # Save reception signal
else:
self.connect(self.source, self.rxpath)
#self.connect(self.source, gr.file_sink(gr.sizeof_gr_complex, 'rx.dat'))
if(options.verbose):
self._print_verbage()
def __init__(self, callback, options):
gr.top_block.__init__(self)
### Rx Side ###
if (options.rx_freq is not None):
self.source = uhd_receiver(options.args_rx, options.bandwidth,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
elif (options.from_file is not None):
self.source = gr.file_source(gr.sizeof_gr_complex,
options.from_file)
else:
self.source = gr.null_source(gr.sizeof_gr_complex)
# Set up receive path
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.rxpath = receive_path(callback, options)
## Tx Side ###
if (options.tx_freq is not None):
self.sink = uhd_transmitter(options.args_tx, options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
elif (options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
# self.txpath = gr.message_source(gr.sizeof_gr_complex, 3)
# nco_sensitivity = 2.0/options.fft_length # correct for fine frequency
# self.nco = ftw.pnc_frequency_modulator_fc(nco_sensitivity)
# self.connect(self.txpath, self.sink) # self.nco,
# if you use two USRPs and want to synchonized
# need to change uhd_interface.py
# self.source.config_mimo()
# time.sleep(1) # to make sync stable
if options.debug:
self.connect(self.source,
gr.file_sink(gr.sizeof_gr_complex,
'rx.dat')) # Save reception signal
else:
self.connect(self.source, self.rxpath)
#self.connect(self.source, gr.file_sink(gr.sizeof_gr_complex, 'rx.dat'))
if (options.verbose):
self._print_verbage()
def __init__(self, options):
gr.top_block.__init__(self)
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.lo_offset,
options.tx_gain, options.spec,
options.antenna, options.clock_source,
options.verbose)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
self.sink = uhd_transmitter(options.args,
options.bandwidth, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
def __init__(self, rx_callback, options):
gr.top_block.__init__(self)
# Setting up 'Transmit Path'
self.txpath = transmit_path(options, self)
# Setting up 'Receive Path'
packet = cnPacket()
self.rxpath = receive_path(rx_callback, packet, options)
# Channel
samples_per_packet = options.samples_per_symbol * 8 * 36
if options.mode == 'default':
print 'Operating mode : Default'
mods = digital.modulation_utils.type_1_mods()
modulator = mods[options.modulation]
args = modulator.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator(**args).bits_per_symbol()
self.usrp_sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
self.usrp_source = uhd_receiver(options.args, symbol_rate,
options.samples_per_symbol,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self.usrp_sink._sps
#self.usrp_sink = usrp_sink(options)
#self.usrp_source = usrp_source(options)
self.connect(self.txpath, self.usrp_sink)
self.connect(self.usrp_source, self.rxpath)
elif options.mode == 'loopback':
print 'Operating mode : Loopback'
self.channel = channel_emulator(options,samples_per_packet)
self.connect(self.txpath, self.channel, self.rxpath)
def __init__(self, options):
gr.top_block.__init__(self)
self.sink = uhd_transmitter(options.args,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
if options.tx_freq is not None:
u = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.tx_gain, options.spec,
options.antenna, options.external,
options.verbose)
elif options.outfile is not None:
u = gr.file_sink(gr.sizeof_gr_complex, options.outfile)
else:
raise SystemExit("--freq or --outfile must be specified\n")
if options.infile is not None:
tx = gr.file_source(gr.sizeof_gr_complex,
options.infile,
repeat=options.repeat)
else:
tx = ofdm_rxtx.TX(options)
data_tones = tx.params.data_tones
if options.char > 0:
# read char from file
data = gr.stream_to_vector(gr.sizeof_float, data_tones * 2)
# NOTE: we use repeat, assuming the file is long enough or properly aligned
self.connect(
gr.file_source(gr.sizeof_char, options.txdata,
repeat=True), gr.char_to_float(),
gr.multiply_const_ff(options.char * (2**-0.5) / 128.0),
data)
else:
data = ofdm_rxtx.make_data(data_tones, options.size,
options.txdata)
if options.log:
self.connect(
data,
gr.file_sink(data_tones * gr.sizeof_gr_complex,
'tx-data.dat'))
self.connect(data, tx)
self.sender = ofdm_rxtx.sender_thread(tx, options)
if options.amp != 1:
amp = gr.multiply_const_cc(options.amp)
self.connect(tx, amp, u)
else:
self.connect(tx, u)
def _setup_usrp_source2(self, options):
"""
Creates a USRP sink, determines the settings for best bitrate,
and attaches to the transmitter's subdevice.
"""
print "setup_usrp_source2", self._tx_freq
if (self._tx_freq is not None):
self.u_sink = uhd_transmitter(options.args, options.bandwidth,
self._tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
print "setup usrp sink ", self.u_sink
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.u_sink)
def __init__(self, modulator, options):
gr.top_block.__init__(self)
if(options.tx_freq is not None):
# Work-around to get the modulation's bits_per_symbol
args = modulator.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator(**args).bits_per_symbol()
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
options.samples_per_symbol = self.sink._sps
elif(options.to_file is not None):
sys.stderr.write(("Saving samples to '%s'.\n\n" % (options.to_file)))
self.sink = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
sys.stderr.write("No sink defined, dumping samples to null sink.\n\n")
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(modulator, options)
alpha = 0.001
thresh = 20
self.probe = analog.probe_avg_mag_sqrd_c(thresh,alpha)
self.source = uhd.usrp_source(
",".join(("", "")),
uhd.stream_args(
cpu_format="fc32",
channels=range(1),
),
)
self.source.set_samp_rate(self.sink._rate)
self.source.set_center_freq(uhd.tune_request(options.tx_freq,0))
self.source.set_gain(options.tx_gain)
self.connect(self.source, self.probe)
self.connect(self.txpath, self.sink)
print >> sys.stderr, options
def __init__(self, options):
gr.top_block.__init__(self)
if (options.tx_freq is not None):
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
elif (options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = gr.file_source(gr.sizeof_gr_complex, options.data_file)
self.amp = gr.multiply_const_cc(options.amp)
self.connect(self.txpath, self.amp, self.sink)
def _setup_usrp_source2(self,options):
"""
Creates a USRP sink, determines the settings for best bitrate,
and attaches to the transmitter's subdevice.
"""
print "setup_usrp_source2",self._tx_freq
if(self._tx_freq is not None):
self.u_sink = uhd_transmitter(options.args,
options.bandwidth,
self._tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
print "setup usrp sink " , self.u_sink
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.u_sink)
def __init__(self, callback, fwd_callback, options):
gr.top_block.__init__(self)
self.source = uhd_receiver(options.args, options.bandwidth,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
self.rxpath = receive_path(callback, fwd_callback, options)
self.connect(self.source, self.rxpath)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
elif(options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = gr.message_source(gr.sizeof_gr_complex, 3)
self.amp = gr.multiply_const_cc(options.amp)
self.connect(self.txpath, self.amp, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
data_capsule = ( (+0+0j), (+0+0j), (+0+0j), (+0+0j), (+0+0j),
(+1+1j), (+1+1j), (+1+1j), (+1+1j), (+1+1j) )
symbol_rate = 500000
self.source = uhd_receiver(options.args, symbol_rate,
2,
options.rx_freq, 30,
options.spec, "RX2",
options.verbose)
self.tx = uhd_transmitter(options.args, symbol_rate,
2,
options.tx_freq, 30,
options.spec, "TX/RX",
options.verbose)
options.samples_per_symbol = self.source._sps
# Set up receive path
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.serve = gr.vector_source_c(data_capsule)
#self.correlator = correlator_cc.correlator_cc()
#self.sink = gr.vector_sink_c()
#self.file_sink = gr.file_sink(gr.sizeof_gr_complex, "out")
self.server = correlator_cc.go_start_cc()
self.inserter = correlator_cc.preamble_insert_cc()
self.correlator = correlator_cc.correlator_cc()
self.connect(self.source, self.correlator)
self.connect(self.serve, (self.server,0))
self.connect(self.correlator, (self.server,1))
self.connect(self.server, self.inserter)
self.connect(self.inserter, self.tx)
def __init__(self, options):
gr.top_block.__init__(self)
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args,
options.bandwidth, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
elif(options.to_file is not None):
self.sink = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
if options.freq is not None:
u = uhd_transmitter(options.tx_args, options.bandwidth,
options.tx_freq, options.tx_gain, options.spec,
options.antenna, options.verbose,
options.external)
elif options.outfile is not None:
u = blocks.file_sink(gr.sizeof_gr_complex, options.outfile)
else:
raise SystemExit("--freq or --outfile must be specified\n")
tx = transmit_path.ofdm_transmit_path(options)
amp = blocks.multiply_const_cc(options.tx_amplitude)
self.connect(tx, amp, u)
self.tx = tx
self.u = u
self.outfile = options.outfile
def __init__(self, callback, fwd_callback, options):
#def __init__(self, options):
gr.top_block.__init__(self)
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
if(options.rx_freq is not None):
self.source = uhd_receiver(options.args,
options.bandwidth,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
elif(options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
print "flow:: ", options.flow
# only for bidirectional flows: source in the reverse direction needs to
# start the ofdm_sink first to allow the socket connections working fine..
if (options.flow == 1):
self.rxpath = receive_path(callback, fwd_callback, options)
self.connect(self.source, self.rxpath)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
else:
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
self.rxpath = receive_path(callback, fwd_callback, options)
self.connect(self.source, self.rxpath)
def __init__(self, modulator_class, options):
'''
See below for what options should hold
'''
gr.hier_block2.__init__(self, "usrp_transmit_path",
gr.io_signature(0, 0, 0), # Input signature
gr.io_signature(0, 0, 0)) # Output signature
tx_path = transmit_path.transmit_path(modulator_class, options)
for attr in dir(tx_path): #forward the methods
if not attr.startswith('_') and not hasattr(self, attr):
setattr(self, attr, getattr(tx_path, attr))
#setup usrp
args = modulator_class.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator_class(**args).bits_per_symbol()
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
#connect
self.connect(tx_path, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
if options.tx_freq is not None:
u = uhd_transmitter(options.args,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.external, options.verbose)
elif options.outfile is not None:
u = gr.file_sink(gr.sizeof_gr_complex, options.outfile)
else:
raise SystemExit("--freq or --outfile must be specified\n")
if options.infile is not None:
tx = gr.file_source(gr.sizeof_gr_complex, options.infile, repeat = options.repeat)
else:
tx = ofdm_rxtx.TX(options)
data_tones = tx.params.data_tones
if options.char > 0:
# read char from file
data = gr.stream_to_vector(gr.sizeof_float, data_tones * 2)
# NOTE: we use repeat, assuming the file is long enough or properly aligned
self.connect(gr.file_source(gr.sizeof_char, options.txdata, repeat=True),
gr.char_to_float(),
gr.multiply_const_ff(options.char * (2**-0.5) / 128.0),
data)
else:
data = ofdm_rxtx.make_data(data_tones, options.size, options.txdata)
if options.log:
self.connect(data, gr.file_sink(data_tones * gr.sizeof_gr_complex, 'tx-data.dat'))
self.connect(data, tx)
self.sender = ofdm_rxtx.sender_thread(tx, options)
if options.amp != 1:
amp = gr.multiply_const_cc(options.amp)
self.connect(tx, amp, u)
else:
self.connect(tx, u)
def __init__(self, mod, options):
gr.top_block.__init__(self, "tx_mpsk")
self._modulator_class = mod
# Get mod_kwargs
mod_kwargs = self._modulator_class.extract_kwargs_from_options(options)
# transmitter
self._modulator = self._modulator_class(**mod_kwargs)
if options.tx_freq is not None:
self._sink = uhd_transmitter(
options.args,
options.bitrate,
options.samples_per_symbol,
options.tx_freq,
options.tx_gain,
options.antenna,
options.verbose,
)
options.samples_per_symbol = self._sink._sps
elif options.to_file is not None:
self._sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self._sink = gr.null_sink(gr.sizeof_gr_complex)
self._transmitter = bert_transmit(
self._modulator._constellation,
options.samples_per_symbol,
options.differential,
options.excess_bw,
gray_coded=True,
verbose=options.verbose,
log=options.log,
)
self.connect(self._transmitter, self._sink)
def __init__(self, options):
gr.top_block.__init__(self)
# some arbitrary data
data_capsule = ( (+1+1j), (+1+1j), (-1-1j), (-1-1j), (+1+1j),
(-1+1j), (-1+1j), (+1-1j), (+1-1j), (-1-1j) )
# Work-around to get the modulation's bits_per_symbol
symbol_rate = 500000
self.sink = uhd_transmitter(options.args, symbol_rate,
2,
options.tx_freq, 30,
options.spec, "TX/RX",
options.verbose)
self.rx = uhd_receiver(options.args, symbol_rate,
2,
options.rx_freq, 30,
options.spec, "RX2",
options.verbose)
options.samples_per_symbol = self.sink._sps
self.serve = gr.vector_source_c(data_capsule)
#self.inserter = correlator_cc.preamble_insert_cc()
#self.connect(self.source, self.inserter)
#self.connect(self.inserter, self.sink)
self.server = correlator_cc.go_start_cc()
self.inserter = correlator_cc.preamble_insert_cc()
self.correlator = correlator_cc.correlator_cc()
self.connect(self.rx, self.correlator)
self.connect(self.serve, (self.server,0))
self.connect(self.correlator, (self.server,1))
self.connect(self.server, self.inserter)
self.connect(self.inserter, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
if (options.tx_freq is not None):
options.bandwidth = 10000000 / 2
#options.bandwidth = 100000000/16
print options.bandwidth
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.lo_offset,
options.tx_gain, options.spec,
options.antenna, options.clock_source,
options.verbose)
elif (options.to_file is not None):
self.sink = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
if(options.to_file is not None):
self.file = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
self.sink = blocks.throttle(gr.sizeof_gr_complex,1e6)
self.connect( self.sink, self.file )
elif(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args,
options.bandwidth, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
else:
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
self._setup_tx_path(options)
self._setup_rpc_manager()
if options.freqoff is not None:
freq_off = self.freq_off = channel.freq_offset(options.freqoff )
self.connect(self.txpath, freq_off)
self.txpath = freq_off
self.rpc_mgr_tx.add_interface("set_freq_offset",self.freq_off.set_freqoff)
if options.multipath:
if options.itu_channel:
self.fad_chan = channel.itpp_channel(options.bandwidth)
self.rpc_mgr_tx.add_interface("set_channel_profile",self.fad_chan.set_channel_profile)
else:
self.fad_chan = filter.fir_filter_ccc(1,[1.0,0.0,2e-1+0.1j,1e-4-0.04j])
self.connect(self.txpath, self.fad_chan)
self.txpath = self.fad_chan
self.connect(self.txpath, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
if (options.to_file is not None):
self.file = blocks.file_sink(gr.sizeof_gr_complex, options.to_file)
self.sink = blocks.throttle(gr.sizeof_gr_complex, 1e6)
self.connect(self.sink, self.file)
elif (options.tx_freq is not None):
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.lo_offset,
options.tx_gain, options.spec,
options.antenna, options.clock_source,
options.verbose)
else:
self.sink = blocks.null_sink(gr.sizeof_gr_complex)
self._setup_tx_path(options)
self._setup_rpc_manager()
if options.freqoff is not None:
freq_off = self.freq_off = channel.freq_offset(options.freqoff)
self.connect(self.txpath, freq_off)
self.txpath = freq_off
self.rpc_mgr_tx.add_interface("set_freq_offset",
self.freq_off.set_freqoff)
if options.multipath:
if options.itu_channel:
self.fad_chan = channel.itpp_channel(options.bandwidth)
self.rpc_mgr_tx.add_interface(
"set_channel_profile", self.fad_chan.set_channel_profile)
else:
self.fad_chan = filter.fir_filter_ccc(
1, [1.0, 0.0, 2e-1 + 0.1j, 1e-4 - 0.04j])
self.connect(self.txpath, self.fad_chan)
self.txpath = self.fad_chan
self.connect(self.txpath, self.sink)
def __init__(self, byte_size, bit_rate=100000):
gr.top_block.__init__(self)
self.mod_type = "bpsk" # bpsk or qpsk
if (self.mod_type == "bpsk"):
self.bits = 1
else:
self.bits = 2
self.samples_per_symbol = 4
self.bit_rate = bit_rate
self.symbol_rate = self.bit_rate / self.bits
self.freq = 1000000000.0
self.trans = transmit_path(byte_size, self.mod_type,
self.samples_per_symbol)
self.sink = uhd_transmitter(sym_rate=self.symbol_rate,
sps=self.samples_per_symbol,
freq=self.freq,
verbose=True,
gain=19.5)
self.connect(self.trans, self.sink)
def __init__(self, callback, fwd_callback, options):
#def __init__(self, options):
gr.top_block.__init__(self)
if (options.tx_freq is not None):
self.sink = uhd_transmitter(options.args, options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
if (options.rx_freq is not None):
self.source = uhd_receiver(options.args, options.bandwidth,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
elif (options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
print "flow:: ", options.flow
# only for bidirectional flows: source in the reverse direction needs to
# start the ofdm_sink first to allow the socket connections working fine..
if (options.flow == 1):
self.rxpath = receive_path(callback, fwd_callback, options)
self.connect(self.source, self.rxpath)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
else:
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
self.rxpath = receive_path(callback, fwd_callback, options)
self.connect(self.source, self.rxpath)
def __init__(self, callback, options):
gr.top_block.__init__(self)
#rec
if(options.rx_freq is not None):
self.source = uhd_receiver(options.args,
options.bandwidth,
options.rx_freq, options.rx_gain,
options.spec, options.antenna,
options.verbose)
elif(options.from_file is not None):
self.source = gr.file_source(gr.sizeof_gr_complex, options.from_file)
else:
self.source = gr.null_source(gr.sizeof_gr_complex)
# Set up receive path
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.rxpath = receive_path(callback, options)
self.connect(self.source, self.rxpath)
#trans
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
elif(options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = transmit_path(options)
self.connect(self.txpath, self.sink)
def __init__(self, options):
gr.top_block.__init__(self)
use_sink = None
if(options.tx_freq is not None):
self.sink = uhd_transmitter(options.args,
options.bandwidth,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
use_sink = self.sink
elif(options.to_file is not None):
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
self.throttle = gr.throttle(gr.sizeof_gr_complex*1, options.file_samp_rate)
self.connect(self.throttle, self.sink)
use_sink = self.throttle
else:
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath = [ ]
self.txpath.append(transmit_path(options))
self.txpath.append(transmit_path(options))
samp_rate = 0
if(options.tx_freq is not None):
samp_rate = self.sink.get_sample_rate()
else:
samp_rate = options.file_samp_rate
print "SAMP RATE " + str(samp_rate)
volume = options.split_amplitude
band_transition = options.band_trans_width
low_transition = options.low_trans_width
guard_width = options.guard_width
self.low_pass_filter_qv0 = gr.interp_fir_filter_ccf(2, firdes.low_pass(
1, samp_rate, samp_rate/4-guard_width/2, low_transition, firdes.WIN_HAMMING, 6.76))
self.freq_translate_qv0 = filter.freq_xlating_fir_filter_ccc(1, (options.num_taps, ), samp_rate/4, samp_rate)
self.band_pass_filter_qv0 = gr.fir_filter_ccc(1, firdes.complex_band_pass(
1, samp_rate, -samp_rate/2+guard_width, 0-guard_width, band_transition, firdes.WIN_HAMMING, 6.76))
self.low_pass_filter_qv1 = gr.interp_fir_filter_ccf(2, firdes.low_pass(
1, samp_rate, samp_rate/4-guard_width/2, low_transition, firdes.WIN_HAMMING, 6.76))
self.freq_translate_qv1 = filter.freq_xlating_fir_filter_ccc(1, (options.num_taps, ), -samp_rate/4, samp_rate)
self.band_pass_filter_qv1 = gr.fir_filter_ccc(1, firdes.complex_band_pass(
1, samp_rate, 0+guard_width, samp_rate/2-guard_width, band_transition, firdes.WIN_HAMMING, 6.76))
self.combiner = gr.add_vcc(1)
self.volume_multiply = blocks.multiply_const_vcc((volume, ))
self.connect((self.txpath[0], 0), (self.low_pass_filter_qv0, 0))
self.connect((self.txpath[1], 0), (self.low_pass_filter_qv1, 0))
self.connect((self.low_pass_filter_qv0, 0), (self.freq_translate_qv0, 0))
self.connect((self.freq_translate_qv0, 0), (self.band_pass_filter_qv0, 0))
self.connect((self.low_pass_filter_qv1, 0), (self.freq_translate_qv1, 0))
self.connect((self.freq_translate_qv1, 0), (self.band_pass_filter_qv1, 0))
self.connect((self.band_pass_filter_qv0, 0), (self.combiner, 0))
self.connect((self.band_pass_filter_qv1, 0), (self.combiner, 1))
self.connect((self.combiner, 0), (self.volume_multiply, 0))
self.connect(self.volume_multiply, use_sink)
def __init__(self, options):
gr.top_block.__init__(self)
# Input Data File
TX_input_file = "TX_Input_Data"
_TX_input_file = "TX_Input_Data"
# TX_input_file = "Ding_Dong2.wma"
# _TX_input_file = 'Ding_Dong2.wma'
TX_source_data = gr.file_source(gr.sizeof_char, TX_input_file)
TX_Input_filesize = os.stat(_TX_input_file).st_size
# RX_output_file = "RX_output_test_file"
# _RX_output_file = 'RX_output_test_file'
# RX_file_sink = gr.file_sink(gr.sizeof_char, RX_output_file)
# RX_output_filesize = os.stat(_RX_output_file).st_size
# Source block
# frame = ((+1+0j),(+1+0j),(+1+0j),(+1+0j),(+1+0j),(+1+0j),(+1+0j),(+1+0j),(+1+0j),(+1+0j))
zeros10 = (0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0)
zeros20 = zeros10 + zeros10
zeros40 = zeros20 + zeros20
frame_pad223 = zeros40 + zeros40 + zeros40 + zeros40 + zeros40 + zeros20 + (0x0, 0x0, 0x0)
frame_pad219 = (
zeros40 + zeros40 + zeros40 + zeros40 + zeros40 + zeros10 + (0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0)
)
frame_pad215 = zeros40 + zeros40 + zeros40 + zeros40 + zeros40 + zeros10 + (0x0, 0x0, 0x0, 0x0, 0x0)
frame_pad183 = zeros40 + zeros40 + zeros40 + zeros40 + zeros20 + (0x0, 0x0, 0x0)
frame_pad179 = zeros40 + zeros40 + zeros40 + zeros40 + zeros10 + (0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0)
data12 = (0xD, 0xE, 0xA, 0xD, 0xB, 0xE, 0xE, 0xF, 0xD, 0x0, 0x0, 0xD)
data40 = data12 + data12 + data12 + (0xD, 0xE, 0xA, 0xD)
data10 = (0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9)
data223 = data40 + data40 + data40 + data40 + data40 + data10 + data10 + (0xA, 0xB, 0xC)
data219 = data40 + data40 + data40 + data40 + data40 + data10 + (0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8)
data183 = data40 + data40 + data40 + data40 + data10 + data10 + (0x0, 0x1, 0x2)
# src = frame_pad + data + data + data + data + frame_pad
# src = frame_pad + frame_pad + data + data + data + data + data + data + data + data + data + data+ data + frame_pad + frame_pad
# src = frame_pad215+data219+frame_pad219
# 10 frames
# src = frame_pad215+frame_pad219+data219+data219+data219+data219+data219+data219+frame_pad219+frame_pad219
# 20 frames
# src = frame_pad215+frame_pad219+data219+data219+data219+data219+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+frame_pad219+frame_pad219
# 8 frames
# src = frame_pad215+frame_pad219+data219+data219+data219+data219+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+data219+data219
# src = src+frame_pad219+frame_pad219
# 50 frames
# 8 frames
src = frame_pad179 + frame_pad183 + data183 + data183 + data183 + data183 + data183 + data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
# src = src+data183+data183
src = src + frame_pad183 + frame_pad183
# 50 frames
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# print len(src)
# print len(data)
# data = data + data + data + data
# data = data + data + data + data + data + data + data + data + data + data + data + data + data + data
# data = (0xd, 0xe, 0xa, 0xd, 0xb, 0xe, 0xe, 0xf, 0xd, 0x0)
# self.source = gr.vector_source_b(src)
# self.source = gr.vector_source_b(frame_pad)
# CRC TX block
# self.crctx = crc.crctx()
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# print len(src)
# print len(data)
# data = data + data + data + data
# data = data + data + data + data + data + data + data + data + data + data + data + data + data + data
# data = (0xd, 0xe, 0xa, 0xd, 0xb, 0xe, 0xe, 0xf, 0xd, 0x0)
# self.source = gr.vector_source_b(src)
# self.source = gr.vector_source_b(frame_pad)
# CRC TX block
# self.crctx = crc.crctx()
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# src = src + src
# print len(src)
# print len(data)
# data = data + data + data + data
# data = data + data + data + data + data + data + data + data + data + data + data + data + data + data
# data = (0xd, 0xe, 0xa, 0xd, 0xb, 0xe, 0xe, 0xf, 0xd, 0x0)
# self.source = gr.vector_source_b(src)
# self.source = gr.vector_source_b(frame_pad)
# CRC TX block
self.crctx = crc.crctx(TX_Input_filesize)
# RS encoding
self.encoder = rscoding_bb.encode_bb()
# Spreader
self.spreader = spreader.spreader_bc()
# Preamble insert block
self.inserter = correlator_cc.preamble_insert_cc()
# Printer block
self.printer = print_bb.print_bb()
# Sink block
symbol_rate = 500000 # Work-around to get the modulation's bits_per_symbol
self.sink = uhd_transmitter(options.args, symbol_rate, 2, options.tx_freq, 30, options.spec, "TX/RX", 1)
# options.verbose)
options.samples_per_symbol = self.sink._sps
ntaps = 11 * int(options.samples_per_symbol)
self.rrc_taps = gr.firdes.root_raised_cosine(1.0, 1000000, symbol_rate, 1.0, ntaps)
self.rrc_filter = gr.interp_fir_filter_ccf(1, self.rrc_taps)
# Connect the blocks
# self.connect(self.source, self.inserter)
# self.connect(self.inserter, self.sink)
# self.connect(self.source, self.spreader)
self.connect(TX_source_data, self.crctx)
# self.connect(self.crctx, self.printer)
# self.connect(self.printer, self.encoder)
self.connect(self.crctx, self.encoder)
self.connect(self.encoder, self.spreader)
# self.connect(self.source, self.spreader)
self.connect(self.spreader, self.inserter)
# self.connect(self.inserter, self.rrc_filter)
# self.connect(self.rrc_filter, self.sink)
self.connect(self.inserter, self.sink)
def main():
#Searches for static 1Mhz windows
def find_hole(power_list):
bin_start=0
bin_stop=0
bins=0
results = []
for i in range(0,len(power_list)):
if power_list[i]< 40.0 :
bins=bins+1
if bins == 34:
bin_stop=i
break
else:
bins=0
bin_start=i+1
if bin_stop == 0:
return 0
results.append(bin_start)
results.append(bin_stop)
return results
#Attemp to find where opponent transmits
def fuzz_target(power_list):
bin_start=0
bin_stop=0
for i in range(0,len(power_list)):
if power_list[i] > 60.0 :
bin_start = i
if (i+34) <= len(power_list):
bin_stop = i+34
else:
bin_stop = len(power_list)
break
if bin_start == 0:
return 0
middle_bin = ((bin_stop-bin_start)/2) + bin_start
result = (middle_bin*27902) + 2357500000.0
return result
def send_pkt(payload='', eof=False):
return tb.txpath.send_pkt(payload, eof)
mods = digital.modulation_utils.type_1_mods()
parser = OptionParser(option_class=eng_option, conflict_handler="resolve")
expert_grp = parser.add_option_group("Expert")
parser.add_option("-m", "--modulation", type="choice", choices=mods.keys(),
default='qpsk',
help="Select modulation from: %s [default=%%default]"
% (', '.join(mods.keys()),))
parser.add_option("-s", "--size", type="eng_float", default=1500,
help="set packet size [default=%default]")
parser.add_option("-M", "--megabytes", type="eng_float", default=1.0,
help="set megabytes to transmit [default=%default]")
parser.add_option("","--discontinuous", action="store_true", default=False,
help="enable discontinous transmission (bursts of 5 packets)")
parser.add_option("","--from-file", default=None,
help="use intput file for packet contents")
parser.add_option("","--to-file", default=None,
help="Output file for modulated samples")
parser.add_option("","--server", action="store_true", default=False,
help="To take data from the server")
transmit_path.add_options(parser, expert_grp)
uhd_transmitter.add_options(parser)
for mod in mods.values():
mod.add_options(expert_grp)
(options, args) = parser.parse_args ()
if len(args) != 0:
parser.print_help()
sys.exit(1)
if options.from_file is not None:
source_file = open(options.from_file, 'r')
# build the graph
# tb = my_top_block(mods[options.modulation], options)
r = gr.enable_realtime_scheduling()
if r != gr.RT_OK:
print "Warning: failed to enable realtime scheduling"
sb = senseblock()
freq_list = []
packet_list = []
#Initialise
tb = my_top_block(mods[options.modulation], options)
tb.start() # start flow graph
#Fake tranmission phase, to provoke opponent attacks
payload_fake = struct.pack('!H', 666 & 0xffff) + "Qamazing team, if we lose handshake freq we are done for!"
for i in range(0, 4000):
send_pkt(payload_fake)
sys.stderr.write('.')
#Sense and fuzz phase
tb.lock()
time.sleep(2)
sb.start()
freq_list = sense_loop(sb)
for i in range(0,1000):
fuzz_result = fuzz_target(freq_list)
print "Sensing complete, stoping senseblock, prepare to fuzz"
sb.stop()
sb.wait()
tb.unlock()
if fuzz_result != 0:
options.tx_freq= fuzz_result
sink = uhd_transmitter(options.args, symbol_rate2,
options.samples_per_symbol, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
txpath = transmit_path(modulator2, options)
for i in range(0, 4000):
send_pkt(payload_fake)
sys.stderr.write('.')
else:
time.sleep(1)
print "Did not find fuzz targets"
time.sleep(2)
print "Fuzzing phase complete"
#Initial sense and then send the result at handshake freq
tb.lock()
sb.start()
freq_list = sense_loop(sb)
while True :
bin_results = find_hole(freq_list)
if bin_results != 0 :
break;
middle_bin = int(((bin_results[1]-bin_results[0])/2) + bin_results[0])
print "Sensing complete, stoping senseblock preparation"
sb.stop()
sb.wait()
tb.unlock()
#Jump to handshake freq
options.tx_freq=2362000000
sink = uhd_transmitter(options.args, symbol_rate2,
options.samples_per_symbol, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
txpath = transmit_path(modulator2, options)
#Special pktno to distinguish sensing packets
number = 3333
#Set new transmit freq to midpoint of discovered window
new_freq = str((middle_bin*27902) + 2357500000.0)
payload_sense = struct.pack('!H', number & 0xffff) + new_freq
#Send a large number of sensing packets (may change if ACK is developed), and then jump
#to new freq
for i in range(0, 2000):
send_pkt(payload_sense)
time.sleep(1)
options.tx_freq=(middle_bin*27902) + 2357500000.0
sink = uhd_transmitter(options.args, symbol_rate2,
options.samples_per_symbol, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
txpath = transmit_path(modulator2, options)
#Main transmit phase
# generate and send packets
nbytes = int(1e6 * options.megabytes)
n = 0
pktno = 0
pkt_size = int(options.size)
# connect to server
if options.server:
sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
server_address = ('10.0.0.200', 50000)
print >>sys.stderr, 'connecting to %s port %s' % server_address
sock.connect(server_address)
while pktno <= 1000 and options.server:
#print "nbytes :%s , pkt_size : %s , n : %s " %(nbytes, pkt_size, n)
if options.server:
data = "";
while len(data) < pkt_size:
data += sock.recv(pkt_size - len(data))
if data == '':
# No more data received from server
sock.close()
break;
elif options.from_file is None:
data = (pkt_size - 2) * chr(pktno & 0xff)
else:
data = source_file.read(pkt_size - 2)
pktno+=1
packet_list.append(data)
#Send packets in bursts of 100 or 165 and then sense again
#Repeat process, until end of expirement
loop_check = True
while(1):
for i in range(0, len(packet_list)):
data=packet_list[i]
payload = struct.pack('!H', i & 0xffff) + data
send_pkt(payload)
sys.stderr.write('.')
#Alternate 2 loops, so that the system jumps at different packet numbers
#This is to ensure, we dont lose packets due to transmitter jumping slightly faster
if i % 100 == 0 and i > 0 and loop_check:
tb.lock()
sb.start()
freq_list = sense_loop(sb)
while True :
bin_results = find_hole(freq_list)
if bin_results != 0 :
break;
middle_bin = int(((bin_results[1]-bin_results[0])/2) + bin_results[0])
print "Sensing complete, stoping senseblock main"
sb.stop()
sb.wait()
tb.unlock()
number = 3333
new_freq = str((middle_bin*27902) + 2357500000.0)
payload_sense = struct.pack('!H', number & 0xffff) + new_freq
for i in range(0, 2000):
send_pkt(payload_sense)
time.sleep(1)
options.tx_freq=(middle_bin*27902) + 2357500000.0
sink = uhd_transmitter(options.args, symbol_rate2,
options.samples_per_symbol, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
txpath = transmit_path(modulator2, options)
elif i % 165 == 0 and i > 0 and not loop_check:
tb.lock()
sb.start()
freq_list = sense_loop(sb)
while True :
bin_results = find_hole(freq_list)
if bin_results != 0 :
break;
middle_bin = int(((bin_results[1]-bin_results[0])/2) + bin_results[0])
print "Sensing complete, stoping senseblock main"
sb.stop()
sb.wait()
tb.unlock()
number = 3333
new_freq = str((middle_bin*27902) + 2357500000.0)
payload_sense = struct.pack('!H', number & 0xffff) + new_freq
for i in range(0, 2000):
send_pkt(payload_sense)
time.sleep(1)
options.tx_freq=(middle_bin*27902) + 2357500000.0
sink = uhd_transmitter(options.args, symbol_rate2,
options.samples_per_symbol, options.tx_freq,
options.lo_offset, options.tx_gain,
options.spec, options.antenna,
options.clock_source, options.verbose)
txpath = transmit_path(modulator2, options)
loop_check = not(loop_check)
send_pkt(eof=True)
tb.wait() # wait for it to finish
def __init__(self, mod, options):
gr.top_block.__init__(self, "tx_mpsk")
Qt.QWidget.__init__(self)
self.setWindowTitle("MPSK Tx")
try:
self.setWindowIcon(Qt.QIcon.fromTheme('gnuradio-grc'))
except:
pass
self.top_scroll_layout = Qt.QVBoxLayout()
self.setLayout(self.top_scroll_layout)
self.top_scroll = Qt.QScrollArea()
self.top_scroll.setFrameStyle(Qt.QFrame.NoFrame)
self.top_scroll_layout.addWidget(self.top_scroll)
self.top_scroll.setWidgetResizable(True)
self.top_widget = Qt.QWidget()
self.top_scroll.setWidget(self.top_widget)
self.top_layout = Qt.QVBoxLayout(self.top_widget)
self.top_grid_layout = Qt.QGridLayout()
self.top_layout.addLayout(self.top_grid_layout)
self._modulator_class = mod
# Get mod_kwargs
mod_kwargs = self._modulator_class.extract_kwargs_from_options(options)
# transmitter
self._modulator = self._modulator_class(**mod_kwargs)
if (options.tx_freq is not None):
symbol_rate = options.bitrate / self._modulator.bits_per_symbol()
self._sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self._sink._sps
elif (options.to_file is not None):
self._sink = blocks.file_sink(gr.sizeof_gr_complex,
options.to_file)
else:
self._sink = blocks.null_sink(gr.sizeof_gr_complex)
#Create GUI to see symbols constellation
self.qtgui_const_sink = qtgui.const_sink_c(
400, #size
"", #name
1 #number of inputs
)
self.qtgui_const_sink.set_update_time(0.1)
self.qtgui_const_sink.set_y_axis(-2, 2)
self.qtgui_const_sink.set_x_axis(-2, 2)
self.qtgui_const_sink.set_trigger_mode(qtgui.TRIG_MODE_FREE,
qtgui.TRIG_SLOPE_POS, 0.0, 0,
"")
self.qtgui_const_sink.enable_autoscale(False)
self.qtgui_const_sink.enable_grid(False)
self.qtgui_const_sink.enable_axis_labels(True)
if not True:
self.qtgui_const_sink.disable_legend()
labels = ["", "", "", "", "", "", "", "", "", ""]
widths = [1, 1, 1, 1, 1, 1, 1, 1, 1, 1]
colors = [
"blue", "red", "red", "red", "red", "red", "red", "red", "red",
"red"
]
styles = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
markers = [0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
alphas = [1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0]
for i in xrange(1):
if len(labels[i]) == 0:
self.qtgui_const_sink.set_line_label(i, "Data {0}".format(i))
else:
self.qtgui_const_sink.set_line_label(i, labels[i])
self.qtgui_const_sink.set_line_width(i, widths[i])
self.qtgui_const_sink.set_line_color(i, colors[i])
self.qtgui_const_sink.set_line_style(i, styles[i])
self.qtgui_const_sink.set_line_marker(i, markers[i])
self.qtgui_const_sink.set_line_alpha(i, alphas[i])
self._qtgui_const_sink_win = sip.wrapinstance(
self.qtgui_const_sink.pyqwidget(), Qt.QWidget)
self.top_layout.addWidget(self._qtgui_const_sink_win)
self._transmitter = bert_transmit(self._modulator._constellation,
options.samples_per_symbol,
options.differential,
options.excess_bw,
gray_coded=True,
verbose=options.verbose,
log=options.log)
self.amp = blocks.multiply_const_cc(options.amplitude)
self.connect(self._transmitter, self.amp, self._sink)
self.connect(self.amp, self.qtgui_const_sink)
def __init__(self, modulator, demodulator, rx_callback, options):
gr.top_block.__init__(self)
sense_symbol_rate=2500000
sense_samples_per_symbol=2
sense_rx_freq=2500000000
sense_rx_gain=20
options.chbw_factor=1
global bandchoose
#args = demodulator.extract_kwargs_from_options(options)
self.sensesource=uhd_receiver(options.args, sense_symbol_rate,
sense_samples_per_symbol,
sense_rx_freq, sense_rx_gain,
options.spec, options.antenna,
options.verbose)
if(options.tx_freq is not None):
# Work-around to get the modulation's bits_per_symbol
args = modulator.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator(**args).bits_per_symbol()
fa = samp_rate/4 #1000000
self.sink = uhd_transmitter(options.args, symbol_rate,
options.samples_per_symbol,
options.tx_freq, options.tx_gain,
options.spec, options.antenna,
options.verbose)
options.samples_per_symbol = self.sink._sps
elif(options.to_file is not None):
sys.stderr.write(("Saving samples to '%s'.\n\n" % (options.to_file)))
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
sys.stderr.write("No sink defined, dumping samples to null sink.\n\n")
self.sink = gr.null_sink(gr.sizeof_gr_complex)
self.txgate = gr.copy(gr.sizeof_gr_complex)
self.sensegate = gr.copy(gr.sizeof_gr_complex)
#self.msgq = gr.msg_queue()
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
# do sense
self.sensepath = sensing_path(options)
self.tx_enabled = True
self.sense_flag=False
self.connect(self.sensesource, self.sensepath)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath1 = transmit_path(modulator, options)
self.txpath2 = transmit_path(modulator, options)
#self.connect(self.txpath, self.sink)
# Define the math operator blocks
# Generate exp(jw1t) and exp(-jw1t)
self.gr_multiply_xx_0 = gr.multiply_vff(1)
self.gr_float_to_complex_0_0 = gr.float_to_complex(1)
self.gr_float_to_complex_0 = gr.float_to_complex(1)
self.const_source_x_0 = gr.sig_source_f(0, gr.GR_CONST_WAVE, 0, 0, -1)
self.analog_sig_source_x_0_0 = gr.sig_source_f(samp_rate, gr.GR_SIN_WAVE, fa, 1, 0)
self.analog_sig_source_x_0 = gr.sig_source_f(samp_rate, gr.GR_COS_WAVE, fa, 1, 0)
# Combine signal from two subbands
self.gr_multiply_xx_1 = gr.multiply_vcc(1)
self.gr_multiply_xx_2 = gr.multiply_vcc(1)
self.gr_c2f_1 = gr.complex_to_float(1)
self.gr_c2f_2 = gr.complex_to_float(1)
self.gr_add_xx_re = gr.add_vff(1)
self.gr_add_xx_im = gr.add_vff(1)
self.gr_f2c = gr.float_to_complex(1)
self.gr_null_source_0 = gr.null_source(gr.sizeof_gr_complex*1)
# output from gr_float_to_complex_0_0 is exp(-jw1t)
# output from gr_float_to_complex_0 is exp(jw1t)
self.connect((self.gr_multiply_xx_0, 0), (self.gr_float_to_complex_0_0, 1))
self.connect((self.analog_sig_source_x_0, 0), (self.gr_float_to_complex_0_0, 0))
self.connect((self.analog_sig_source_x_0_0, 0), (self.gr_float_to_complex_0, 1))
self.connect((self.analog_sig_source_x_0, 0), (self.gr_float_to_complex_0, 0))
self.connect((self.analog_sig_source_x_0_0, 0), (self.gr_multiply_xx_0, 0))
self.connect((self.const_source_x_0, 0), (self.gr_multiply_xx_0, 1))
# txpath1 * exp(-jw1t)
#self.connect(self.txpath1, (self.gr_multiply_xx_1, 0))
self.connect((self.gr_float_to_complex_0_0, 0), (self.gr_multiply_xx_1, 1))
# txpath2 * exp(jw1t)
#self.connect(self.txpath2, (self.gr_multiply_xx_2, 0))
self.connect((self.gr_float_to_complex_0, 0), (self.gr_multiply_xx_2, 1))
if bandchoose == 0:
self.connect(self.txpath1, (self.gr_multiply_xx_1, 0))
self.connect(self.gr_null_source_0 , (self.gr_multiply_xx_2, 0))
elif bandchoose == 1:
self.connect(self.gr_null_source_0 , (self.gr_multiply_xx_1, 0))
self.connect(self.txpath2, (self.gr_multiply_xx_2, 0))
else:
self.connect(self.txpath1, (self.gr_multiply_xx_1, 0))
self.connect(self.txpath2, (self.gr_multiply_xx_2, 0))
self.connect((self.gr_multiply_xx_1, 0), self.gr_c2f_1)
self.connect((self.gr_multiply_xx_2, 0), self.gr_c2f_2)
self.connect((self.gr_c2f_1,0), (self.gr_add_xx_re,0))
self.connect((self.gr_c2f_2,0), (self.gr_add_xx_re,1))
self.connect((self.gr_c2f_1,1), (self.gr_add_xx_im,0))
self.connect((self.gr_c2f_2,1), (self.gr_add_xx_im,1))
self.connect(self.gr_add_xx_re, (self.gr_f2c,0))
self.connect(self.gr_add_xx_im, (self.gr_f2c,1))
self.connect(self.gr_f2c, self.sink)
def __init__(self, modulator, options):
gr.top_block.__init__(self)
self.txpath = []
use_sink = None
if options.tx_freq is not None:
# Work-around to get the modulation's bits_per_symbol
args = modulator.extract_kwargs_from_options(options)
symbol_rate = options.bitrate / modulator(**args).bits_per_symbol()
self.sink = uhd_transmitter(
options.args,
symbol_rate,
options.samples_per_symbol,
options.tx_freq,
options.tx_gain,
options.spec,
options.antenna,
options.verbose,
)
sample_rate = self.sink.get_sample_rate()
options.samples_per_symbol = self.sink._sps
use_sink = self.sink
elif options.to_file is not None:
sys.stderr.write(("Saving samples to '%s'.\n\n" % (options.to_file)))
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
self.throttle = gr.throttle(gr.sizeof_gr_complex * 1, options.file_samp_rate)
self.connect(self.throttle, self.sink)
use_sink = self.throttle
else:
sys.stderr.write("No sink defined, dumping samples to null sink.\n\n")
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# do this after for any adjustments to the options that may
# occur in the sinks (specifically the UHD sink)
self.txpath.append(transmit_path(modulator, options))
self.txpath.append(transmit_path(modulator, options))
samp_rate = 0
if options.tx_freq is not None:
samp_rate = self.sink.get_sample_rate()
else:
samp_rate = options.file_samp_rate
volume = options.split_amplitude
band_transition = options.band_trans_width
low_transition = options.low_trans_width
guard_width = options.guard_width
self.low_pass_filter_qv0 = gr.interp_fir_filter_ccf(
2, firdes.low_pass(1, samp_rate, samp_rate / 4 - guard_width / 2, low_transition, firdes.WIN_HAMMING, 6.76)
)
self.freq_translate_qv0 = filter.freq_xlating_fir_filter_ccc(1, (options.num_taps,), samp_rate / 4, samp_rate)
self.band_pass_filter_qv0 = gr.fir_filter_ccc(
1,
firdes.complex_band_pass(
1, samp_rate, -samp_rate / 2 + guard_width, 0 - guard_width, band_transition, firdes.WIN_HAMMING, 6.76
),
)
self.low_pass_filter_qv1 = gr.interp_fir_filter_ccf(
2, firdes.low_pass(1, samp_rate, samp_rate / 4 - guard_width / 2, low_transition, firdes.WIN_HAMMING, 6.76)
)
self.freq_translate_qv1 = filter.freq_xlating_fir_filter_ccc(1, (options.num_taps,), -samp_rate / 4, samp_rate)
self.band_pass_filter_qv1 = gr.fir_filter_ccc(
1,
firdes.complex_band_pass(
1, samp_rate, 0 + guard_width, samp_rate / 2 - guard_width, band_transition, firdes.WIN_HAMMING, 6.76
),
)
self.combiner = gr.add_vcc(1)
self.volume_multiply = blocks.multiply_const_vcc((volume,))
self.connect((self.txpath[0], 0), (self.low_pass_filter_qv0, 0))
self.connect((self.txpath[1], 0), (self.low_pass_filter_qv1, 0))
self.connect((self.low_pass_filter_qv0, 0), (self.freq_translate_qv0, 0))
self.connect((self.freq_translate_qv0, 0), (self.band_pass_filter_qv0, 0))
self.connect((self.low_pass_filter_qv1, 0), (self.freq_translate_qv1, 0))
self.connect((self.freq_translate_qv1, 0), (self.band_pass_filter_qv1, 0))
self.connect((self.band_pass_filter_qv0, 0), (self.combiner, 0))
self.connect((self.band_pass_filter_qv1, 0), (self.combiner, 1))
self.connect((self.combiner, 0), (self.volume_multiply, 0))
self.connect(self.volume_multiply, use_sink)
def __init__(self, options):
gr.top_block.__init__(self)
if(options.tx_freq is not None):
symbol_rate = 500000
self.sink = uhd_transmitter(options.args, symbol_rate,
2,
options.tx_freq, 30,
options.spec, "TX/RX",
1)
options.samples_per_symbol = self.sink._sps
elif(options.to_file is not None):
sys.stderr.write(("Saving samples to '%s'.\n\n" % (options.to_file)))
self.sink = gr.file_sink(gr.sizeof_gr_complex, options.to_file)
else:
sys.stderr.write("No sink defined, dumping samples to null sink.\n\n")
self.sink = gr.null_sink(gr.sizeof_gr_complex)
# Packetizer
self.packettx = packetizer.packet_source()
# CRC TX block
self.crctx = crc.crctx(0)
# RS encoding
self.encoder = rscoding_bb.encode_bb()
# Spreader
self.spreader = spreader.spreader_bc()
# Preamble insert block
self.inserter = correlator_cc.preamble_insert_cc()
# Printer block
self.printer = print_bb.print_bb()
ntaps = 11 * int(options.samples_per_symbol)
self.rrc_taps = gr.firdes.root_raised_cosine(
1.0,
1000000,
symbol_rate,
1.0,
ntaps)
self.rrc_filter = gr.interp_fir_filter_ccf(1, self.rrc_taps)
# Connect the blocks
#self.connect(self.source, self.inserter)
#self.connect(self.inserter, self.sink)
#self.connect(self.source, self.spreader)
#self.connect(TX_source_data, self.crctx)
self.connect(self.packettx, self.crctx)
#self.connect(self.crctx, self.printer)
#self.connect(self.printer, self.encoder)
self.connect(self.crctx, self.encoder)
self.connect(self.encoder, self.spreader)
#self.connect(self.source, self.spreader)
self.connect(self.spreader, self.inserter)
#self.connect(self.inserter, self.rrc_filter)
#self.connect(self.rrc_filter, self.sink)
self.connect(self.inserter, self.sink)
def __init__(self, options_tx, options_rx, callback):
gr.top_block.__init__(self)
self.init_pctime = 0
self.init_hwtime = 0
self.tx_outfile = options_tx.tx_outfile
self._tx_amplitude = options_tx.tx_amplitude
#######################################################################
# USRP Config #
#######################################################################
tx_slave=False
rx_slave=False
if options_tx.tx_args != options_rx.rx_args:
print "===Transceiver: enable MIMO mode, RX as slave, TX as master==="
rx_slave=True
if options_rx.mode == "PNC":
rx_slave=False
# lzyou: it seems that you MUST put rx before tx
# otherwise something strange will happen (eg, not synced even the program tells you synced)
d_rx_enable = True
if options_rx.rx_freq is not None:
source = uhd_receiver(options_rx.rx_args,
options_rx.bandwidth,
options_rx.rx_freq, options_rx.rx_gain,
options_rx.spec, options_rx.antenna,
options_rx.verbose, options_rx.external, rx_slave)
#source.u.set_min_output_buffer(163840)
elif options_rx.rx_infile is not None:
source = blocks.file_source(gr.sizeof_gr_complex, options_rx.rx_infile)
else:
source = None
d_rx_enable = False
self.d_rx_enable = d_rx_enable
self.source = source
d_tx_enable = True
if options_tx.tx_freq is not None:
sink = uhd_transmitter(options_tx.tx_args,
options_tx.bandwidth,
options_tx.tx_freq, options_tx.tx_gain,
options_tx.spec, options_tx.antenna,
options_tx.verbose, options_tx.external, tx_slave)
elif options_tx.tx_outfile is not None:
sink = blocks.file_sink(gr.sizeof_gr_complex, options_tx.tx_outfile)
else:
sink = None
d_tx_enable = False
self.d_tx_enable = d_tx_enable
self.sink = sink
#######################################################################
# FIXME: support diff (tx/rx) framebytes
self.framebytes = None
#######################################################################
# Tx Path #
#######################################################################
if d_tx_enable:
self.tx = transmit_path.ofdm_transmit_path(options_tx)
self.amp = blocks.multiply_const_cc(self._tx_amplitude)
#self.amp.set_min_output_buffer(163840)
self.connect(self.tx, self.amp, self.sink)
self.framebytes = self.tx.framebytes
#######################################################################
#######################################################################
# Rx Path #
#######################################################################
# log usrp raw samples
#if options_rx.mode == 'PNC':
# self.connect(source, blocks.file_sink(gr.sizeof_gr_complex, '/tmp/PNCRXdiag.dat'))
if options_rx.logfile:
if options_rx.mode == 'PNC':
self.connect(source, blocks.file_sink(gr.sizeof_gr_complex, '/tmp/PNCRXdiag.dat'))
else:
assert(options_rx.node != None)
if options_rx.node == 'A':
self.connect(source, blocks.file_sink(gr.sizeof_gr_complex, '/tmp/NodeARXdiag.dat'))
elif options_rx.node == 'B':
self.connect(source, blocks.file_sink(gr.sizeof_gr_complex, '/tmp/NodeBRXdiag.dat'))
# setup receive_path
if d_rx_enable:
if options_rx.rx_outfile is not None:
self.rx = blocks.file_sink(gr.sizeof_gr_complex, options_rx.rx_outfile)
self.connect(self.source, self.rx)
return
self.rx = receive_path.ofdm_receive_path(options_rx, callback)
#if self.framebytes is not None:
# assert(self.framebytes == self.rx.framebytes)
self.framebytes = self.rx.framebytes
self.connect(self.source, self.rx)
else:
self.rx = None
#######################################################################
if options_rx.profile:
from gnuradio.ctrlport import monitor
self.ctrlport_monitor = monitor()
self.ctrlport_monitor_performance = monitor("gr-perf-monitorx")