def test_delete(stc):
plLogger = PLLogger.GetLogger('methodology')
plLogger.LogInfo("test_delete.begin")
ctor = CScriptableCreator()
hnd_reg = CHandleRegistry.Instance()
meth_key = "UNITTEST_DEL"
UnitTestUtils.create_fake_installed_test_meth(meth_key, [])
UnitTestUtils.add_fake_test_case(meth_key, [], meth_key + "-1")
UnitTestUtils.add_fake_test_case(meth_key, [], meth_key + "-2")
# Update the BLL objects
meth_man_utils.build_test_methodology_manager(use_txml=True)
meth_handle = UnitTestUtils.get_methodology_handle(meth_key)
assert meth_handle
meth_obj = hnd_reg.Find(meth_handle)
assert meth_obj is not None
tc_obj_list = meth_obj.GetObjects("StmTestCase")
assert len(tc_obj_list) == 2
tc_obj1 = None
tc_obj2 = None
for tc_obj in tc_obj_list:
if tc_obj.Get("TestCaseKey") == meth_key + "-1":
tc_obj1 = tc_obj
elif tc_obj.Get("TestCaseKey") == meth_key + "-2":
tc_obj2 = tc_obj
assert tc_obj1
tc_obj1_path = tc_obj1.Get("Path")
assert tc_obj2
tc_obj2_path = tc_obj2.Get("Path")
# Delete an installed test case
cmd = ctor.CreateCommand(PKG + ".DeleteTestCaseCommand")
cmd.Set("StmTestCase", tc_obj2.GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
# Check the path
assert os.path.exists(tc_obj1_path)
assert not os.path.exists(tc_obj2_path)
# Delete installed test methodology
cmd = ctor.CreateCommand(PKG + ".DeleteMethodologyCommand")
cmd.Set("StmMethodology", meth_obj.GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
stc_sys = CStcSystem.Instance()
common_data_path = stc_sys.GetApplicationCommonDataPath()
install_dir = os.path.join(common_data_path, mgr_const.MM_TEST_METH_DIR)
test_meth_dir = os.path.join(install_dir, meth_key)
assert os.path.exists(test_meth_dir) is False
plLogger.LogInfo("test_delete.end")
def disabled_test_load_with_json(stc):
plLogger = PLLogger.GetLogger("test_load_with_json")
plLogger.LogInfo("begin")
ctor = CScriptableCreator()
project = CStcSystem.Instance().GetObject("Project")
sequencer = CStcSystem.Instance().GetObject("Sequencer")
hnd_reg = CHandleRegistry.Instance()
cmd_name = "Ipv4NetworkProfileGroupCommand"
pkg_name = "spirent.methodology."
create_cmd = ctor.CreateCommand(pkg_name + cmd_name)
insert_cmd = ctor.CreateCommand("SequencerInsertCommand")
insert_cmd.SetCollection("CommandList", [create_cmd.GetObjectHandle()])
insert_cmd.Execute()
exposedConfig = ctor.Create("ExposedConfig", project)
prop1 = ctor.Create("ExposedProperty", exposedConfig)
UnitTestUtils.bind(prop1, create_cmd, pkg_name + cmd_name, "DeviceCount")
prop2 = ctor.Create("ExposedProperty", exposedConfig)
UnitTestUtils.bind(prop2, create_cmd, pkg_name + cmd_name, "RouterId")
prop3 = ctor.Create("ExposedProperty", exposedConfig)
UnitTestUtils.bind(prop3, create_cmd, pkg_name + cmd_name, "Ipv4Addr")
test_name = "TestLoadWithJson"
test_key = "JsonTestKey"
# Delete the methodology we are about to create just in case
# there was an error on a previous run.
test_meth_obj = meth_man_utils.get_stm_methodology_from_key(test_key)
if test_meth_obj:
# Delete installed test methodology
cmd = ctor.CreateCommand("spirent.methodology.manager."
"DeleteMethodologyCommand")
cmd.Set("StmMethodology", test_meth_obj.GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
# Publish as a methodology
cmd = ctor.CreateCommand("spirent.methodology.manager.PublishMethodologyCommand")
cmd.Set("MethodologyName", test_name)
cmd.Set("MethodologyKey", test_key)
cmd.Set("MinPortCount", "0")
cmd.Execute()
cmd.MarkDelete()
# Reset Config
cmd = ctor.CreateCommand("ResetConfigCommand")
cmd.Set("Config", CStcSystem.Instance().GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
sequencer = CStcSystem.Instance().GetObject("Sequencer")
cmd_list = sequencer.GetObjects("Command")
assert len(cmd_list) == 0
meth_handle = UnitTestUtils.get_methodology_handle(test_name)
assert meth_handle
# TODO: Create a test case instead of running the methodology
# itself.
# Set up JSON input
json_input = "{ \"ports\": {}, \"params\" : {\"" + prop1.Get("EPNameId") + "\" : 101, " + \
"\"" + prop2.Get("EPNameId") + "\" : \"188.0.0.5\", " + \
"\"" + prop3.Get("EPNameId") + "\" : \"172.0.17.5\" } }"
active_test = meth_man_utils.get_active_test_case()
assert active_test is None
# Load the test methodology created earlier
# Set the JSON input
cmd = ctor.CreateCommand("spirent.methodology.manager."
"LoadTestMethodologyCommand")
meth = meth_man_utils.get_stm_methodology_from_key(test_key)
assert meth is not None
cmd.Set("StmMethodology", meth.GetObjectHandle())
cmd.Set("InputJson", json_input)
cmd.Execute()
# Check the command sequence
cmd_hnd_list = sequencer.GetCollection("CommandList")
assert len(cmd_hnd_list) == 1
tlgc = hnd_reg.Find(cmd_hnd_list[0])
assert tlgc is not None
assert tlgc.IsTypeOf(pkg_name + "manager.MethodologyGroupCommand") is True
cmd_hnd_list = tlgc.GetCollection("CommandList")
assert len(cmd_hnd_list) == 1
create_cmd = hnd_reg.Find(cmd_hnd_list[0])
assert create_cmd.IsTypeOf(pkg_name + cmd_name) is True
# Check defaults
assert create_cmd.Get("DeviceCount") == 1
assert create_cmd.Get("RouterId") == "192.0.0.1"
assert create_cmd.Get("Ipv4Addr") == "192.85.1.3"
# Execute a MethodologyGroupCommand
tlgc2 = ctor.CreateCommand(pkg_name + "manager.MethodologyGroupCommand")
tlgc2.Set("InputJson", tlgc.Get("InputJson"))
tlgc2.Execute()
tlgc2.MarkDelete()
# Check the new defaults
assert create_cmd.Get("DeviceCount") == 101
assert create_cmd.Get("RouterId") == "188.0.0.5"
assert create_cmd.Get("Ipv4Addr") == "172.0.17.5"
# Clean up
meth = meth_man_utils.get_stm_methodology_from_key(test_key)
cmd = ctor.CreateCommand("spirent.methodology.manager."
"DeleteMethodologyCommand")
cmd.Set("StmMethodology", meth.GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
plLogger.LogInfo("end")
def d_test_save_as_test_case_with_ports(self, stc):
plLogger = PLLogger.GetLogger('methodology')
plLogger.LogInfo("begin")
# TODO: Fix this once the test case work is finished
if True:
plLogger.LogWarn("Fix me after test cases have been repaired.")
return
ctor = CScriptableCreator()
meth_name = "TestMeth_SaveAsTestCase"
stc_sys = CStcSystem.Instance()
meth_man_pkg = "spirent.methodology.manager"
# Defaults
port_loc = "//10.14.16.20/2/1"
mac_addr = "00:01:94:00:00:01"
enable_vlan = False
vlan_id = 100
ipv4_addr = "192.85.1.3"
plLogger.LogInfo("Create a test package")
test_name, name_dict = TestSaveTestCase.make_fake_test_pkg(mac_addr,
enable_vlan,
vlan_id,
ipv4_addr,
port_loc,
meth_name)
# Build a port_map for validation (flip the name_dict)
port_map = {}
port_map[name_dict[port_loc]] = port_loc
plLogger.LogInfo("Import the methodology " + test_name)
# Import the test methodology (make available)
cmd = ctor.CreateCommand(meth_man_pkg + ".ImportTestCommand")
cmd.Set("fileName", test_name + ".stm")
cmd.Execute()
cmd.MarkDelete()
plLogger.LogInfo("Verify that the TXML file exists after import")
# Check the TXML file exists
install_dir = os.path.join(stc_sys.GetApplicationCommonDataPath(),
mgr_const.MM_TEST_METH_DIR)
test_meth_dir = os.path.join(install_dir, meth_name)
assert os.path.exists(test_meth_dir)
test_case_dir = os.path.join(test_meth_dir, mgr_const.MM_TEST_CASE_SUBDIR)
assert os.path.exists(test_case_dir)
file_list = os.listdir(test_case_dir)
assert len(file_list) == 1
meta_file = file_list[0]
assert meta_file == mgr_const.MM_META_FILE_NAME
plLogger.LogInfo("Verify the TXML file contents haven't changed")
# Check TXML defaults
TestSaveTestCase.check_txml_values(meta_file,
meta_man.TEST_INSTANCE_ORIGINAL,
mac_addr,
enable_vlan,
vlan_id, ipv4_addr,
port_map,
meth_name)
new_port_loc = "//10.14.16.27/2/1"
new_mac = "00:01:95:CC:CC:0s"
new_enable_vlan = "true"
new_vlan = "541"
new_ip = "182.0.0.1"
# New port_map (for validation)
new_port_map = {}
new_port_map[name_dict[port_loc]] = new_port_loc
# Create JSON string with new defaults
json_input = "{\"ports\" : {\"" + name_dict[port_loc] + "\" : \"" + \
new_port_loc + "\"},\"params\" : {\"" + \
name_dict["MacAddr"] + "\" : \"" + new_mac + "\"," + \
" \"" + name_dict["EnableVlan"] + "\" : \"" + new_enable_vlan + "\"," + \
" \"" + name_dict["VlanId"] + "\" : \"" + new_vlan + "\"," + \
" \"" + name_dict["Ipv4Addr"] + "\" : \"" + new_ip + "\" }}"
plLogger.LogInfo("Execute SaveTestCaseCommand with json_input: \n" + json_input)
# Create a new "instance" of the testcase
new_test_case = "MyNewTestCase"
cmd = ctor.CreateCommand(meth_man_pkg + ".SaveTestCaseCommand")
cmd.Set("TestMethodologyName", test_name)
cmd.Set("InputJson", json_input)
cmd.Set("TestCaseName", new_test_case)
cmd.Execute()
# Get the TXML file path
new_txml_file_path = cmd.Get("TxmlFileName")
new_txml_file = os.path.split(new_txml_file_path)[-1]
cmd.MarkDelete()
# Check the TXML file exists
install_dir = os.path.join(stc_sys.GetApplicationCommonDataPath(),
mgr_const.MM_TEST_METH_DIR)
test_meth_dir = os.path.join(install_dir, meth_name)
assert os.path.exists(test_meth_dir)
test_case_dir = os.path.join(test_meth_dir, mgr_const.MM_TEST_CASE_SUBDIR)
assert os.path.exists(test_case_dir)
file_list = os.listdir(test_case_dir)
assert len(file_list) > 1
assert new_txml_file in file_list
assert mgr_const.MM_META_FILE_NAME in file_list
plLogger.LogInfo("Check the new saved file")
TestSaveTestCase.check_txml_values(new_txml_file, new_test_case, new_mac,
new_enable_vlan, new_vlan, new_ip,
new_port_map, meth_name)
plLogger.LogInfo("Verify the original hasn't changed")
TestSaveTestCase.check_txml_values(mgr_const.MM_META_FILE_NAME,
meta_man.TEST_INSTANCE_ORIGINAL, mac_addr,
enable_vlan, vlan_id,
ipv4_addr, port_map, meth_name)
# Clean up anything that might be left from a previous run
meth_handle = UnitTestUtils.get_methodology_handle(meth_name)
UnitTestUtils.cleanup_methodology(meth_handle)
plLogger.LogInfo("end")
def d_test_save_test_case(self, stc):
plLogger = PLLogger.GetLogger('methodology')
plLogger.LogInfo("begin")
# TODO: Fix this once the test case work is finished
if True:
plLogger.LogWarn("Fix me after test cases have been repaired.")
return
ctor = CScriptableCreator()
meth_name = "TestMeth_SaveTestCase"
stc_sys = CStcSystem.Instance()
meth_man_pkg = "spirent.methodology.manager"
# Defaults
mac_addr = "00:01:94:00:00:01"
enable_vlan = False
vlan_id = 100
ipv4_addr = "192.85.1.3"
plLogger.LogInfo("Create and export the test")
test_name, name_dict = TestSaveTestCase.make_fake_test_pkg(mac_addr,
enable_vlan,
vlan_id,
ipv4_addr,
"",
meth_name)
plLogger.LogInfo("name_dict: " + str(name_dict))
plLogger.LogInfo("test_name: " + test_name)
new_mac = "00:01:95:CC:CC:05"
new_enable_vlan = "true"
new_vlan = "541"
new_ip = "182.0.0.1"
# Create JSON string with new defaults
json_input = "{ \"ports\" : {}, \"params\" : {\"" + name_dict["MacAddr"] + "\" : \"" + \
new_mac + "\"," + \
" \"" + name_dict["EnableVlan"] + "\" : \"" + new_enable_vlan + "\"," + \
" \"" + name_dict["VlanId"] + "\" : \"" + new_vlan + "\"," + \
" \"" + name_dict["Ipv4Addr"] + "\" : \"" + new_ip + "\" } }"
plLogger.LogInfo("Execute save test with json_input: \n" + json_input)
# Change the defaults in "original" TXML by setting TestCaseName to ""
cmd = ctor.CreateCommand(meth_man_pkg + ".SaveTestCaseCommand")
cmd.Set("TestMethodologyName", test_name)
cmd.Set("InputJson", json_input)
cmd.Set("TestCaseName", "")
cmd.Execute()
cmd.MarkDelete()
# Check the TXML file exists
install_dir = os.path.join(stc_sys.GetApplicationCommonDataPath(),
mgr_const.MM_TEST_METH_DIR)
test_meth_dir = os.path.join(install_dir, meth_name)
assert os.path.exists(test_meth_dir)
test_case_dir = os.path.join(test_meth_dir, mgr_const.MM_TEST_CASE_SUBDIR)
assert os.path.exists(test_case_dir)
file_list = os.listdir(test_case_dir)
assert len(file_list) == 1
meta_file = file_list[0]
assert meta_file == mgr_const.MM_META_FILE_NAME
# Check TXML defaults
plLogger.LogInfo("check original txml has new values")
TestSaveTestCase.check_txml_values(meta_file,
meta_man.TEST_INSTANCE_ORIGINAL,
new_mac,
new_enable_vlan,
new_vlan,
new_ip,
None,
meth_name)
# Clean up anything that might be left
meth_handle = UnitTestUtils.get_methodology_handle(meth_name)
UnitTestUtils.cleanup_methodology(meth_handle)
plLogger.LogInfo("end")
def test_delete_with_active_testcase(stc):
plLogger = PLLogger.GetLogger('methodology')
plLogger.LogInfo("test_delete_active_test.begin")
ctor = CScriptableCreator()
hnd_reg = CHandleRegistry.Instance()
meth_key = "UNITTEST_DEL"
UnitTestUtils.create_fake_installed_test_meth(meth_key, [])
UnitTestUtils.add_fake_test_case(meth_key, [], meth_key + "-1")
# Update the BLL objects
meth_man_utils.build_test_methodology_manager(use_txml=True)
meth_man = meth_man_utils.get_meth_manager()
meth_handle = UnitTestUtils.get_methodology_handle(meth_key)
assert meth_handle
meth_obj = hnd_reg.Find(meth_handle)
assert meth_obj is not None
meth_path = meth_obj.Get("Path")
assert os.path.exists(meth_path)
tc_obj = meth_obj.GetObject("StmTestCase")
assert tc_obj
tc_path = tc_obj.Get("Path")
assert os.path.exists(tc_path)
# Set up the test case to look as if it were active
# Set the active test case
meth_man_utils.set_active_test_case(tc_obj)
# Create the results object and set its status
res_obj = ctor.Create("StmTestResult", tc_obj)
status_dict = {"execStatus": "running",
"verdict": "created",
"verdictExplanation": "Not Defined"}
res_obj.Set("Status", json.dumps(status_dict))
# Try to delete the methodology
cmd = ctor.CreateCommand(PKG + ".DeleteMethodologyCommand")
cmd.Set("StmMethodology", meth_obj.GetObjectHandle())
cmd.Execute()
assert cmd.Get("PassFailState") == "FAILED"
cmd.MarkDelete()
# Check the bll objects
found_hnd = False
for meth in meth_man.GetObjects("StmMethodology"):
if meth.GetObjectHandle() == meth_handle:
found_hnd = True
break
assert found_hnd
# Check the active test case
assert meth_man_utils.get_active_test_case().GetObjectHandle() == \
tc_obj.GetObjectHandle()
# Check the path
assert os.path.exists(tc_path)
assert os.path.exists(meth_path)
# Set the testcase to completed
status_dict = {"execStatus": "completed",
"verdict": "created",
"verdictExplanation": "Not Defined"}
res_obj.Set("Status", json.dumps(status_dict))
# Try to delete the methodology
cmd = ctor.CreateCommand(PKG + ".DeleteMethodologyCommand")
cmd.Set("StmMethodology", meth_obj.GetObjectHandle())
cmd.Execute()
assert cmd.Get("PassFailState") == "PASSED"
cmd.MarkDelete()
# Check the bll objects
found_hnd = False
for meth in meth_man.GetObjects("StmMethodology"):
if meth.GetObjectHandle() == meth_handle:
found_hnd = True
break
assert not found_hnd
# Check the active test case
assert meth_man_utils.get_active_test_case() is None
# Check the path
assert not os.path.exists(meth_path)
assert not os.path.exists(tc_path)
stc_sys = CStcSystem.Instance()
common_data_path = stc_sys.GetApplicationCommonDataPath()
install_dir = os.path.join(common_data_path, mgr_const.MM_TEST_METH_DIR)
test_meth_dir = os.path.join(install_dir, meth_key)
assert os.path.exists(test_meth_dir) is False
plLogger.LogInfo("test_delete_active_test.end")
def disabled_test_RemoveMethodologyGroupCommand(self, stc):
plLogger = PLLogger.GetLogger('methodology')
plLogger.LogInfo("begin.test_RemoveMethodologyGroupCommand")
ctor = CScriptableCreator()
project = CStcSystem.Instance().GetObject("Project")
sequencer = CStcSystem.Instance().GetObject("Sequencer")
cmd_name = "ArpNdStartCommand"
stak_cmd_name = "spirent.methodology.Ipv4NetworkProfileGroupCommand"
arp_cmd = ctor.CreateCommand(cmd_name)
stak_cmd = ctor.CreateCommand(stak_cmd_name)
insert_cmd = ctor.CreateCommand("SequencerInsertCommand")
insert_cmd.SetCollection("CommandList", [arp_cmd.GetObjectHandle(),
stak_cmd.GetObjectHandle()])
insert_cmd.Execute()
exposedConfig = ctor.Create("ExposedConfig", project)
prop1 = ctor.Create("ExposedProperty", exposedConfig)
UnitTestUtils.bind(prop1, arp_cmd, cmd_name, "ArpNdOption")
prop4 = ctor.Create("ExposedProperty", exposedConfig)
UnitTestUtils.bind(prop4, stak_cmd, stak_cmd_name, "DeviceCount")
test_name = "TestMethRemoveGroup"
meth_key = "UNITTEST_RM_GRP"
# Delete the methodology we are about to create just in case
# there was an error on a previous run.
test_meth_obj = meth_man_utils.get_stm_methodology_from_key(meth_key)
if test_meth_obj:
# Delete installed test methodology
cmd = ctor.CreateCommand("spirent.methodology.manager."
"DeleteMethodologyCommand")
cmd.Set("StmMethodology", test_meth_obj.GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
# Publish methodology
cmd = ctor.CreateCommand(PKG + ".PublishMethodologyCommand")
cmd.Set("MethodologyName", test_name)
cmd.Set("MethodologyKey", meth_key)
cmd.Set("MinPortCount", "0")
cmd.SetCollection("FeatureIdList", ["Feature1"])
cmd.Execute()
cmd.MarkDelete()
# Reset Config
cmd = ctor.CreateCommand("ResetConfigCommand")
cmd.Set("Config", CStcSystem.Instance().GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
sequencer = CStcSystem.Instance().GetObject("Sequencer")
cmd_list = sequencer.GetObjects("Command")
assert len(cmd_list) == 0
meth_handle = UnitTestUtils.get_methodology_handle(meth_key)
assert meth_handle
# Load the test methodology created earlier
cmd = ctor.CreateCommand(PKG + ".LoadTestMethodologyCommand")
meth = meth_man_utils.get_stm_methodology_from_key(meth_key)
cmd.Set("StmMethodology", meth.GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
cmd_list = sequencer.GetObjects("Command")
assert len(cmd_list) == 3
# Strip the MethodologyGroupCommand and make the test methodology editable again
cmd = ctor.CreateCommand(PKG + ".RemoveMethodologyGroupCommand")
cmd.Execute()
cmd.MarkDelete()
# Check the sequence
for cmd in sequencer.GetObjects("Command"):
assert cmd.IsTypeOf(PKG + ".MethodologyGroupCommand") is False
scp = cmd.GetObject("SequenceableCommandProperties",
RelationType("SequenceableProperties"))
assert scp is not None
assert scp.Get("AllowDelete") is True
assert scp.Get("AllowMove") is True
assert scp.Get("AllowUngroup") is True
assert scp.Get("AllowDisable") is True
assert scp.Get("ShowEditor") is True
# Clean up
meth_man_utils.remove_active_test_relation()
meth = meth_man_utils.get_stm_methodology_from_key(meth_key)
cmd = ctor.CreateCommand(PKG + ".DeleteMethodologyCommand")
cmd.Set("StmMethodology", meth.GetObjectHandle())
cmd.Execute()
cmd.MarkDelete()
plLogger.LogInfo("end.test_RemoveMethodologyGroupCommand")