def calculate_left_right_padding(maxcol, align_type, align_amount,
width_type, width_amount, min_width, left, right):
"""
Return the amount of padding (or clipping) on the left and
right part of maxcol columns to satisfy the following:
align_type -- 'left', 'center', 'right', 'relative'
align_amount -- a percentage when align_type=='relative'
width_type -- 'fixed', 'relative', 'clip'
width_amount -- a percentage when width_type=='relative'
otherwise equal to the width of the widget
min_width -- a desired minimum width for the widget or None
left -- a fixed number of columns to pad on the left
right -- a fixed number of columns to pad on the right
>>> clrp = calculate_left_right_padding
>>> clrp(15, 'left', 0, 'fixed', 10, None, 2, 0)
(2, 3)
>>> clrp(15, 'relative', 0, 'fixed', 10, None, 2, 0)
(2, 3)
>>> clrp(15, 'relative', 100, 'fixed', 10, None, 2, 0)
(5, 0)
>>> clrp(15, 'center', 0, 'fixed', 4, None, 2, 0)
(6, 5)
>>> clrp(15, 'left', 0, 'clip', 18, None, 0, 0)
(0, -3)
>>> clrp(15, 'right', 0, 'clip', 18, None, 0, -1)
(-2, -1)
>>> clrp(15, 'center', 0, 'fixed', 18, None, 2, 0)
(0, 0)
>>> clrp(20, 'left', 0, 'relative', 60, None, 0, 0)
(0, 8)
>>> clrp(20, 'relative', 30, 'relative', 60, None, 0, 0)
(2, 6)
>>> clrp(20, 'relative', 30, 'relative', 60, 14, 0, 0)
(2, 4)
"""
if width_type == RELATIVE:
maxwidth = max(maxcol - left - right, 0)
width = int_scale(width_amount, 101, maxwidth + 1)
if min_width is not None:
width = max(width, min_width)
else:
width = width_amount
standard_alignments = {LEFT:0, CENTER:50, RIGHT:100}
align = standard_alignments.get(align_type, align_amount)
# add the remainder of left/right the padding
padding = maxcol - width - left - right
right += int_scale(100 - align, 101, padding + 1)
left = maxcol - width - right
# reduce padding if we are clipping an edge
if right < 0 and left > 0:
shift = min(left, -right)
left -= shift
right += shift
elif left < 0 and right > 0:
shift = min(right, -left)
right -= shift
left += shift
# only clip if width_type == 'clip'
if width_type != CLIP and (left < 0 or right < 0):
left = max(left, 0)
right = max(right, 0)
return left, right
middle_values = [0] + [(values[i] + values[i + 1] + 1) // 2
for i in range(len(values) - 1)] + [size]
lookup_table = []
for i in range(len(middle_values)-1):
count = middle_values[i + 1] - middle_values[i]
lookup_table.extend([i] * count)
return lookup_table
_CUBE_256_LOOKUP = _value_lookup_table(_CUBE_STEPS_256, 256)
_GRAY_256_LOOKUP = _value_lookup_table([0] + _GRAY_STEPS_256 + [0xff], 256)
_CUBE_88_LOOKUP = _value_lookup_table(_CUBE_STEPS_88, 256)
_GRAY_88_LOOKUP = _value_lookup_table([0] + _GRAY_STEPS_88 + [0xff], 256)
# convert steps to values that will be used by string versions of the colors
# 1 hex digit for rgb and 0..100 for grayscale
_CUBE_STEPS_256_16 = [int_scale(n, 0x100, 0x10) for n in _CUBE_STEPS_256]
_GRAY_STEPS_256_101 = [int_scale(n, 0x100, 101) for n in _GRAY_STEPS_256]
_CUBE_STEPS_88_16 = [int_scale(n, 0x100, 0x10) for n in _CUBE_STEPS_88]
_GRAY_STEPS_88_101 = [int_scale(n, 0x100, 101) for n in _GRAY_STEPS_88]
# create lookup tables for 1 hex digit rgb and 0..100 for grayscale values
_CUBE_256_LOOKUP_16 = [_CUBE_256_LOOKUP[int_scale(n, 16, 0x100)]
for n in range(16)]
_GRAY_256_LOOKUP_101 = [_GRAY_256_LOOKUP[int_scale(n, 101, 0x100)]
for n in range(101)]
_CUBE_88_LOOKUP_16 = [_CUBE_88_LOOKUP[int_scale(n, 16, 0x100)]
for n in range(16)]
_GRAY_88_LOOKUP_101 = [_GRAY_88_LOOKUP[int_scale(n, 101, 0x100)]
for n in range(101)]
def calculate_top_bottom_filler(maxrow, valign_type, valign_amount, height_type,
height_amount, min_height, top, bottom):
"""
Return the amount of filler (or clipping) on the top and
bottom part of maxrow rows to satisfy the following:
valign_type -- 'top', 'middle', 'bottom', 'relative'
valign_amount -- a percentage when align_type=='relative'
height_type -- 'given', 'relative', 'clip'
height_amount -- a percentage when width_type=='relative'
otherwise equal to the height of the widget
min_height -- a desired minimum width for the widget or None
top -- a fixed number of rows to fill on the top
bottom -- a fixed number of rows to fill on the bottom
>>> ctbf = calculate_top_bottom_filler
>>> ctbf(15, 'top', 0, 'given', 10, None, 2, 0)
(2, 3)
>>> ctbf(15, 'relative', 0, 'given', 10, None, 2, 0)
(2, 3)
>>> ctbf(15, 'relative', 100, 'given', 10, None, 2, 0)
(5, 0)
>>> ctbf(15, 'middle', 0, 'given', 4, None, 2, 0)
(6, 5)
>>> ctbf(15, 'middle', 0, 'given', 18, None, 2, 0)
(0, 0)
>>> ctbf(20, 'top', 0, 'relative', 60, None, 0, 0)
(0, 8)
>>> ctbf(20, 'relative', 30, 'relative', 60, None, 0, 0)
(2, 6)
>>> ctbf(20, 'relative', 30, 'relative', 60, 14, 0, 0)
(2, 4)
"""
if height_type == RELATIVE:
maxheight = max(maxrow - top - bottom, 0)
height = int_scale(height_amount, 101, maxheight + 1)
if min_height is not None:
height = max(height, min_height)
else:
height = height_amount
standard_alignments = {TOP:0, MIDDLE:50, BOTTOM:100}
valign = standard_alignments.get(valign_type, valign_amount)
# add the remainder of top/bottom to the filler
filler = maxrow - height - top - bottom
bottom += int_scale(100 - valign, 101, filler + 1)
top = maxrow - height - bottom
# reduce filler if we are clipping an edge
if bottom < 0 < top:
shift = min(top, -bottom)
top -= shift
bottom += shift
elif top < 0 < bottom:
shift = min(bottom, -top)
bottom -= shift
top += shift
# no negative values for filler at the moment
top = max(top, 0)
bottom = max(bottom, 0)
return top, bottom
def calculate_left_right_padding(maxcol, align_type, align_amount, width_type,
width_amount, min_width, left, right):
"""
Return the amount of padding (or clipping) on the left and
right part of maxcol columns to satisfy the following:
align_type -- 'left', 'center', 'right', 'relative'
align_amount -- a percentage when align_type=='relative'
width_type -- 'fixed', 'relative', 'clip'
width_amount -- a percentage when width_type=='relative'
otherwise equal to the width of the widget
min_width -- a desired minimum width for the widget or None
left -- a fixed number of columns to pad on the left
right -- a fixed number of columns to pad on the right
>>> clrp = calculate_left_right_padding
>>> clrp(15, 'left', 0, 'fixed', 10, None, 2, 0)
(2, 3)
>>> clrp(15, 'relative', 0, 'fixed', 10, None, 2, 0)
(2, 3)
>>> clrp(15, 'relative', 100, 'fixed', 10, None, 2, 0)
(5, 0)
>>> clrp(15, 'center', 0, 'fixed', 4, None, 2, 0)
(6, 5)
>>> clrp(15, 'left', 0, 'clip', 18, None, 0, 0)
(0, -3)
>>> clrp(15, 'right', 0, 'clip', 18, None, 0, -1)
(-2, -1)
>>> clrp(15, 'center', 0, 'fixed', 18, None, 2, 0)
(0, 0)
>>> clrp(20, 'left', 0, 'relative', 60, None, 0, 0)
(0, 8)
>>> clrp(20, 'relative', 30, 'relative', 60, None, 0, 0)
(2, 6)
>>> clrp(20, 'relative', 30, 'relative', 60, 14, 0, 0)
(2, 4)
"""
if width_type == RELATIVE:
maxwidth = max(maxcol - left - right, 0)
width = int_scale(width_amount, 101, maxwidth + 1)
if min_width is not None:
width = max(width, min_width)
else:
width = width_amount
standard_alignments = {LEFT: 0, CENTER: 50, RIGHT: 100}
align = standard_alignments.get(align_type, align_amount)
# add the remainder of left/right the padding
padding = maxcol - width - left - right
right += int_scale(100 - align, 101, padding + 1)
left = maxcol - width - right
# reduce padding if we are clipping an edge
if right < 0 and left > 0:
shift = min(left, -right)
left -= shift
right += shift
elif left < 0 and right > 0:
shift = min(right, -left)
right -= shift
left += shift
# only clip if width_type == 'clip'
if width_type != CLIP and (left < 0 or right < 0):
left = max(left, 0)
right = max(right, 0)
return left, right
for i in range(len(values) - 1)] + [size]
lookup_table = []
for i in range(len(middle_values) - 1):
count = middle_values[i + 1] - middle_values[i]
lookup_table.extend([i] * count)
return lookup_table
_CUBE_256_LOOKUP = _value_lookup_table(_CUBE_STEPS_256, 256)
_GRAY_256_LOOKUP = _value_lookup_table([0] + _GRAY_STEPS_256 + [0xff], 256)
_CUBE_88_LOOKUP = _value_lookup_table(_CUBE_STEPS_88, 256)
_GRAY_88_LOOKUP = _value_lookup_table([0] + _GRAY_STEPS_88 + [0xff], 256)
# convert steps to values that will be used by string versions of the colors
# 1 hex digit for rgb and 0..100 for grayscale
_CUBE_STEPS_256_16 = [int_scale(n, 0x100, 0x10) for n in _CUBE_STEPS_256]
_GRAY_STEPS_256_101 = [int_scale(n, 0x100, 101) for n in _GRAY_STEPS_256]
_CUBE_STEPS_88_16 = [int_scale(n, 0x100, 0x10) for n in _CUBE_STEPS_88]
_GRAY_STEPS_88_101 = [int_scale(n, 0x100, 101) for n in _GRAY_STEPS_88]
# create lookup tables for 1 hex digit rgb and 0..100 for grayscale values
_CUBE_256_LOOKUP_16 = [
_CUBE_256_LOOKUP[int_scale(n, 16, 0x100)] for n in range(16)
]
_GRAY_256_LOOKUP_101 = [
_GRAY_256_LOOKUP[int_scale(n, 101, 0x100)] for n in range(101)
]
_CUBE_88_LOOKUP_16 = [
_CUBE_88_LOOKUP[int_scale(n, 16, 0x100)] for n in range(16)
]
_GRAY_88_LOOKUP_101 = [
def calculate_top_bottom_filler(maxrow, valign_type, valign_amount,
height_type, height_amount, min_height, top,
bottom):
"""
Return the amount of filler (or clipping) on the top and
bottom part of maxrow rows to satisfy the following:
valign_type -- 'top', 'middle', 'bottom', 'relative'
valign_amount -- a percentage when align_type=='relative'
height_type -- 'given', 'relative', 'clip'
height_amount -- a percentage when width_type=='relative'
otherwise equal to the height of the widget
min_height -- a desired minimum width for the widget or None
top -- a fixed number of rows to fill on the top
bottom -- a fixed number of rows to fill on the bottom
>>> ctbf = calculate_top_bottom_filler
>>> ctbf(15, 'top', 0, 'given', 10, None, 2, 0)
(2, 3)
>>> ctbf(15, 'relative', 0, 'given', 10, None, 2, 0)
(2, 3)
>>> ctbf(15, 'relative', 100, 'given', 10, None, 2, 0)
(5, 0)
>>> ctbf(15, 'middle', 0, 'given', 4, None, 2, 0)
(6, 5)
>>> ctbf(15, 'middle', 0, 'given', 18, None, 2, 0)
(0, 0)
>>> ctbf(20, 'top', 0, 'relative', 60, None, 0, 0)
(0, 8)
>>> ctbf(20, 'relative', 30, 'relative', 60, None, 0, 0)
(2, 6)
>>> ctbf(20, 'relative', 30, 'relative', 60, 14, 0, 0)
(2, 4)
"""
if height_type == RELATIVE:
maxheight = max(maxrow - top - bottom, 0)
height = int_scale(height_amount, 101, maxheight + 1)
if min_height is not None:
height = max(height, min_height)
else:
height = height_amount
standard_alignments = {TOP: 0, MIDDLE: 50, BOTTOM: 100}
valign = standard_alignments.get(valign_type, valign_amount)
# add the remainder of top/bottom to the filler
filler = maxrow - height - top - bottom
bottom += int_scale(100 - valign, 101, filler + 1)
top = maxrow - height - bottom
# reduce filler if we are clipping an edge
if bottom < 0 < top:
shift = min(top, -bottom)
top -= shift
bottom += shift
elif top < 0 < bottom:
shift = min(bottom, -top)
bottom -= shift
top += shift
# no negative values for filler at the moment
top = max(top, 0)
bottom = max(bottom, 0)
return top, bottom