def draw_graph(self):
n=0
if (len(self.time)>0):
mul,unit=time_with_units(float(self.time[len(self.time)-1]-self.time[0]))
else:
mul=1.0
unit="s"
time=[]
for i in range(0,len(self.time)):
time.append(self.time[i]*mul)
self.fig.clf()
self.fig.subplots_adjust(bottom=0.2)
self.fig.subplots_adjust(left=0.1)
self.ax1 = self.fig.add_subplot(111)
self.ax1.ticklabel_format(useOffset=False)
#ax2 = ax1.twinx()
x_pos=0.0
layer=0
color =['r','g','b','y','o','r','g','b','y','o']
self.ax1.set_ylabel(_("Voltage (Volts)"))
voltage, = self.ax1.plot(time,self.voltage, 'ro-', linewidth=3 ,alpha=1.0)
self.ax1.set_xlabel(_("Time (")+unit+')')
self.ax2 = self.ax1.twinx()
self.ax2.set_ylabel(_("Magnitude (au)"))
#ax2.set_ylabel('Energy (eV)')
sun, = self.ax2.plot(time,self.sun, 'go-', linewidth=3 ,alpha=1.0)
if debug_mode()==True:
laser, = self.ax2.plot(time,self.laser, 'bo-', linewidth=3 ,alpha=1.0)
fs_laser_enabled=False
if self.fs_laser_time!=-1:
if len(self.time)>2:
dt=(self.time[len(time)-1]-self.time[0])/100
start=self.fs_laser_time-dt*5
stop=self.fs_laser_time+dt*5
x = linspace(start,stop,100)
y=self.gaussian(x,self.fs_laser_time,dt)
#print y
fs_laser, = self.ax2.plot(x*mul,y, 'g-', linewidth=3 ,alpha=1.0)
fs_laser_enabled=True
self.ax2.ticklabel_format(style='sci', axis='x', scilimits=(0,0))
if debug_mode()==True:
if fs_laser_enabled==True:
self.fig.legend((voltage, sun, laser,fs_laser), (_("Voltage"), _("Sun"), _("CW laser"), _("fs laser")), 'upper right')
else:
self.fig.legend((voltage, sun, laser), (_("Voltage"), _("Sun"), _("CW laser")), 'upper right')
else:
if fs_laser_enabled==True:
self.fig.legend((voltage, sun, fs_laser), (_("Voltage"), _("Sun"), _("fs laser")), 'upper right')
else:
self.fig.legend((voltage, sun), (_("Voltage"), _("Sun")), 'upper right')
def draw_graph(self):
if (len(self.time) > 0):
mul, unit = time_with_units(
float(self.time[len(self.time) - 1] - self.time[0]))
else:
mul = 1.0
unit = "s"
time = []
for i in range(0, len(self.time)):
time.append(self.time[i] * mul)
self.fig.clf()
self.fig.subplots_adjust(bottom=0.2)
self.fig.subplots_adjust(left=0.1)
self.ax1 = self.fig.add_subplot(211)
self.ax1.ticklabel_format(useOffset=False)
self.ax1.spines['right'].set_visible(False)
self.ax1.spines['top'].set_visible(False)
self.ax1.yaxis.set_ticks_position('left')
self.ax1.xaxis.set_ticks_position('bottom')
self.ax1.yaxis.set_major_locator(ticker.MaxNLocator(4))
self.ax1.set_ylabel(_("Voltage (Volts)"))
self.ax1.set_xticklabels([])
self.ax1.grid(True)
voltage, = self.ax1.plot(time,
self.voltage,
'ro-',
linewidth=3,
alpha=1.0)
self.ax2 = self.fig.add_subplot(212)
self.ax2.spines['right'].set_visible(False)
self.ax2.spines['top'].set_visible(False)
self.ax2.yaxis.set_ticks_position('left')
self.ax2.xaxis.set_ticks_position('bottom')
self.ax2.yaxis.set_major_locator(ticker.MaxNLocator(4))
self.ax2.set_ylabel(_("Suns") + " (Suns)")
self.ax2.set_xlabel(_("Time") + " (" + unit + ')')
self.ax2.grid(True)
sun, = self.ax2.plot(time, self.sun, 'go-', linewidth=3, alpha=1.0)
if enable_betafeatures() == True:
laser, = self.ax2.plot(time,
self.laser,
'bo-',
linewidth=3,
alpha=1.0)
fs_laser_enabled = False
if self.fs_laser_time != -1:
if len(self.time) > 2:
dt = (self.time[len(time) - 1] - self.time[0]) / 100
start = self.fs_laser_time - dt * 5
stop = self.fs_laser_time + dt * 5
x = linspace(start, stop, 100)
y = self.gaussian(x, self.fs_laser_time, dt)
#print y
fs_laser, = self.ax2.plot(x * mul,
y,
'g-',
linewidth=3,
alpha=1.0)
fs_laser_enabled = True
self.ax2.ticklabel_format(style='sci',
axis='x',
scilimits=(0, 0))
self.fig.subplots_adjust(hspace=0)
def do_plot(self):
#print("PLOT TYPE=",self.plot_token.type)
if self.plot_token!=None and len(self.plot_id)!=0:
plot_number=0
#print(">>>>>>>>>>>>",self.plot_token.x_len,self.plot_token.y_len,self.plot_token.z_len)
self.fig.clf()
self.fig.subplots_adjust(bottom=0.2)
self.fig.subplots_adjust(bottom=0.2)
self.fig.subplots_adjust(left=0.1)
self.fig.subplots_adjust(hspace = .001)
title=""
if self.plot_title=="":
title=self.plot_token.title
else:
title=self.plot_title
if self.plot_token.time!=-1.0 and self.plot_token.Vexternal!=-1.0:
mul,unit=time_with_units(self.plot_token.time)
title=title+" V="+str(self.plot_token.Vexternal)+" time="+str(self.plot_token.time*mul)+" "+unit
self.fig.suptitle(title)
self.ax=[]
number_of_plots=max(self.plot_id)+1
if self.plot_token.type=="heat":
number_of_plots=1
for i in range(0,number_of_plots):
self.ax.append(self.fig.add_subplot(number_of_plots,1,i+1, axisbg='white'))
#Only place label on bottom plot
if i==number_of_plots-1:
#print(self.plot_token.x_label,self.plot_token.x_units)
self.ax[i].set_xlabel(self.plot_token.x_label+" ("+str(self.plot_token.x_units)+")")
else:
self.ax[i].tick_params(axis='x', which='both', bottom='off', top='off',labelbottom='off') # labels along the bottom edge are off
#Only place y label on center plot
if self.plot_token.normalize==True or self.plot_token.norm_to_peak_of_all_data==True:
y_text="Normalized "+self.plot_token.y_label
y_units="au"
else:
y_text=self.plot_token.y_label
y_units=self.plot_token.y_units
if i==math.trunc(number_of_plots/2):
self.ax[i].set_ylabel(y_text+" ("+y_units+")")
if self.plot_token.logx==True:
self.ax[i].set_xscale("log")
if self.plot_token.logy==True:
self.ax[i].set_yscale("log")
lines=[]
files=[]
data=dat_file()
my_max=1.0
if self.plot_token.x_len==1 and self.plot_token.z_len==1:
all_max=1.0
if self.plot_token.norm_to_peak_of_all_data==True:
my_max=-1e40
for i in range(0, len(self.input_files)):
if self.read_data_file(data,i)==True:
local_max,my_min=dat_file_max_min(data)
if local_max>my_max:
my_max=local_max
all_max=my_max
for i in range(0, len(self.input_files)):
if self.read_data_file(data,i)==True:
if all_max!=1.0:
for x in range(0,data.x_len):
for y in range(0,data.y_len):
for z in range(0,data.z_len):
data.data[z][x][y]=data.data[z][x][y]/all_max
Ec, = self.ax[plot_number].plot(data.y_scale,data.data[0][0], linewidth=3 ,alpha=1.0,color=self.color[i],marker=self.marker[i])
#label data if required
#if self.plot_token.label_data==True:
# for ii in range(0,len(t)):
# if z[ii]!="":
# fx_unit=fx_with_units(float(z[ii]))
# label_text=str(float(z[ii])*fx_unit[0])+" "+fx_unit[1]
# self.ax[plot_number].annotate(label_text,xy = (t[ii], s[ii]), xytext = (-20, 20),textcoords = 'offset points', ha = 'right', va = 'bottom',bbox = dict(boxstyle = 'round,pad=0.5', fc = 'yellow', alpha = 0.5),arrowprops = dict(arrowstyle = '->', connectionstyle = 'arc3,rad=0'))
#if number_of_plots>1:
# self.ax[plot_number].yaxis.set_major_formatter(ticker.FormatStrFormatter('%0.1e'))
# if min(s)!=max(s):
# print("TICKS=",(max(s)-min(s))/4.0)
# self.ax[plot_number].yaxis.set_ticks(arange(min(s), max(s), (max(s)-min(s))/4.0 ))
#print("roderick",self.labels,i,self.labels[i])
if self.labels[i]!="":
#print "Rod=",self.labels[i]
#print self.plot_token.key_units
files.append("$"+numbers_to_latex(str(self.labels[i]))+" "+pygtk_to_latex_subscript(self.plot_token.key_units)+"$")
lines.append(Ec)
self.lx = None
self.ly = None
if self.plot_token.legend_pos=="No key":
self.ax[plot_number].legend_ = None
else:
self.fig.legend(lines, files, self.plot_token.legend_pos)
elif self.plot_token.x_len>1 and self.plot_token.y_len>1 and self.plot_token.z_len==1: #3d plot
data=dat_file()
if self.read_data_file(data,0)==True:
im=self.ax[0].pcolor(data.y_scale,data.x_scale,data.data[0])
self.fig.colorbar(im)
#self.ax[0].plot_surface(x, y, z, rstride=1, cstride=1, cmap=cm.coolwarm,linewidth=0, antialiased=False)
#self.ax[0].invert_yaxis()
#self.ax[0].xaxis.tick_top()
elif self.plot_token.type=="heat":
x=[]
y=[]
z=[]
pos=float(self.plot_token.x_start)
x_step=(float(self.plot_token.x_stop)-float(self.plot_token.x_start))/self.plot_token.x_points
while(pos<float(self.plot_token.x_stop)):
x.append(pos)
pos=pos+x_step
pos=float(self.plot_token.y_start)
y_step=(float(self.plot_token.y_stop)-float(self.plot_token.y_start))/self.plot_token.y_points
while(pos<float(self.plot_token.y_stop)):
y.append(pos)
pos=pos+y_step
data = zeros((len(y),len(x)))
for ii in range(0,len(self.input_files)):
t=[]
s=[]
z=[]
if self.read_data_file(t,s,z,ii)==True:
#print(self.input_files[ii])
for points in range(0,len(t)):
found=0
if t[points]>x[0]:
for x_pos in range(0,len(x)):
if x[x_pos]>t[points]:
found=found+1
break
if s[points]>y[0]:
for y_pos in range(0,len(y)):
if y_pos!=0:
if y[y_pos]>s[points]:
found=found+1
break
if found==2:
#print("adding data at",x_pos,y_pos)
if data[y_pos][x_pos]<10.0:
data[y_pos][x_pos]=data[y_pos][x_pos]+1
else:
print("not adding point",t[points],s[points])
#print(x)
#print(y)
#print(data)
x_grid, y_grid = mgrid[float(self.plot_token.y_start):float(self.plot_token.y_stop):complex(0, len(y)), float(self.plot_token.x_start):float(self.plot_token.x_stop):complex(0, len(x))]
self.ax[0].pcolor(y_grid,x_grid,data)
else:
x=[]
y=[]
z=[]
if read_data_2d(x,y,z,self.input_files[0])==True:
#print(len(x),len(y),len(z),self.input_files[0])
maxx=-1
maxy=-1
for i in range(0,len(z)):
if x[i]>maxx:
maxx=x[i]
if y[i]>maxy:
maxy=y[i]
maxx=maxx+1
maxy=maxy+1
data = zeros((maxy,maxx))
for i in range(0,len(z)):
data[y[i]][x[i]]= random.random()+5
self.ax[0].text(x[i], y[i]+float(maxy)/float(len(z))+0.1,'%.1e' % z[i], fontsize=12)
#fig, ax = plt.subplots()
self.ax[0].pcolor(data,cmap=plt.cm.Blues)
self.ax[0].invert_yaxis()
self.ax[0].xaxis.tick_top()
#self.fig.tight_layout(pad=0.0, w_pad=0.0, h_pad=0.0)
self.fig.canvas.draw()
def draw_graph(self):
if (len(self.time) > 0):
mul, unit = time_with_units(
float(self.time[len(self.time) - 1] - self.time[0]))
else:
mul = 1.0
unit = "s"
time = []
for i in range(0, len(self.time)):
time.append(self.time[i] * mul)
self.fig.clf()
self.fig.subplots_adjust(bottom=0.2)
self.fig.subplots_adjust(left=0.1)
self.ax1 = self.fig.add_subplot(111)
self.ax1.ticklabel_format(useOffset=False)
#ax2 = ax1.twinx()
#x_pos=0.0
#layer=0
#color =['r','g','b','y','o','r','g','b','y','o']
self.ax1.set_ylabel(_("Voltage (Volts)"))
voltage, = self.ax1.plot(time,
self.voltage,
'ro-',
linewidth=3,
alpha=1.0)
self.ax1.set_xlabel(_("Time") + " (" + unit + ')')
self.ax2 = self.ax1.twinx()
self.ax2.set_ylabel(_("Magnitude") + " (au)")
#ax2.set_ylabel('Energy (eV)')
sun, = self.ax2.plot(time, self.sun, 'go-', linewidth=3, alpha=1.0)
if enable_betafeatures() == True:
laser, = self.ax2.plot(time,
self.laser,
'bo-',
linewidth=3,
alpha=1.0)
fs_laser_enabled = False
if self.fs_laser_time != -1:
if len(self.time) > 2:
dt = (self.time[len(time) - 1] - self.time[0]) / 100
start = self.fs_laser_time - dt * 5
stop = self.fs_laser_time + dt * 5
x = linspace(start, stop, 100)
y = self.gaussian(x, self.fs_laser_time, dt)
#print y
fs_laser, = self.ax2.plot(x * mul,
y,
'g-',
linewidth=3,
alpha=1.0)
fs_laser_enabled = True
self.ax2.ticklabel_format(style='sci',
axis='x',
scilimits=(0, 0))
if enable_betafeatures() == True:
if fs_laser_enabled == True:
self.fig.legend(
(voltage, sun, laser, fs_laser),
(_("Voltage"), _("Sun"), _("CW laser"), _("fs laser")),
'upper right')
else:
self.fig.legend((voltage, sun, laser),
(_("Voltage"), _("Sun"), _("CW laser")),
'upper right')
else:
if fs_laser_enabled == True:
self.fig.legend((voltage, sun, fs_laser),
(_("Voltage"), _("Sun"), _("fs laser")),
'upper right')
else:
self.fig.legend((voltage, sun), (_("Voltage"), _("Sun")),
'upper right')
def do_plot(self):
if len(self.data)==0:
return
if self.data[0].valid_data==False:
return
self.fig.clf()
self.fig.subplots_adjust(bottom=0.2)
self.fig.subplots_adjust(bottom=0.2)
self.fig.subplots_adjust(left=0.1)
self.fig.subplots_adjust(hspace = .001)
dim=""
if self.data[0].x_len==1 and self.data[0].z_len==1:
dim="linegraph"
elif self.data[0].x_len>1 and self.data[0].y_len>1 and self.data[0].z_len==1:
if self.data[0].type=="3d":
dim="wireframe"
if self.data[0].type=="heat":
dim="heat"
elif self.data[0].x_len>1 and self.data[0].y_len>1 and self.data[0].z_len>1:
print("ohhh full 3D")
dim="3d"
else:
print(_("I don't know how to process this type of file!"),self.data[0].x_len, self.data[0].y_len,self.data[0].z_len)
return
title=self.data[0].title
if self.data[0].time!=-1.0 and self.data[0].Vexternal!=-1.0:
mul,unit=time_with_units(self.data[0].time)
title=self.data[0].title+" V="+str(self.data[0].Vexternal)+" "+_("time")+"="+str(self.data[0].time*mul)+" "+unit
self.fig.suptitle(title)
self.setWindowTitle(title+" - www.gpvdm.com")
self.ax=[]
for i in range(0,len(self.input_files)):
if dim=="linegraph":
self.ax.append(self.fig.add_subplot(111,axisbg='white'))
elif dim=="wireframe":
self.ax.append(self.fig.add_subplot(111,axisbg='white' ,projection='3d'))
elif dim=="heat":
self.ax.append(self.fig.add_subplot(111,axisbg='white'))
elif dim=="3d":
self.ax.append(self.fig.add_subplot(111,axisbg='white' ,projection='3d'))
#Only place label on bottom plot
# if self.data[i].type=="3d":
#else:
# self.ax[i].tick_params(axis='x', which='both', bottom='off', top='off',labelbottom='off') # labels along the bottom edge are off
#Only place y label on center plot
if self.data[0].normalize==True or self.data[0].norm_to_peak_of_all_data==True:
y_text="Normalized "+self.data[0].data_label
data_units="au"
else:
data_text=self.data[i].data_label
data_units=self.data[i].data_units
if self.data[0].logx==True:
self.ax[i].set_xscale("log")
if self.data[0].logy==True:
self.ax[i].set_yscale("log")
all_plots=[]
files=[]
my_max=1.0
if dim=="linegraph": #This is for the 1D graph case
self.ax[0].set_xlabel(self.data[0].x_label+" ("+str(self.data[0].x_units)+")")
self.ax[0].set_ylabel(self.data[0].data_label+" ("+self.data[0].data_units+")")
for i in range(0,len(self.input_files)):
cur_plot, = self.ax[i].plot(self.data[i].y_scale,self.data[i].data[0][0], linewidth=3 ,alpha=1.0,color=get_color(i),marker=get_marker(i))
if self.labels[i]!="":
files.append("$"+numbers_to_latex(str(self.labels[i]))+" "+pygtk_to_latex_subscript(self.data[0].key_units)+"$")
all_plots.append(cur_plot)
if len(self.data[i].labels)!=0:
for ii in range(0,len(self.data[i].y_scale)):
fx_unit=fx_with_units(float(self.data[i].labels[ii]))
label_text=str(float(self.data[i].labels[ii])*fx_unit[0])+" "+fx_unit[1]
self.ax[i].annotate(label_text,xy = (self.data[i].y_scale[ii], self.data[i].data[0][0][ii]), xytext = (-20, 20),textcoords = 'offset points', ha = 'right', va = 'bottom',bbox = dict(boxstyle = 'round,pad=0.5', fc = 'yellow', alpha = 0.5),arrowprops = dict(arrowstyle = '->', connectionstyle = 'arc3,rad=0'))
#print(self.data[i].labels)
elif dim=="wireframe":
self.ax[0].set_xlabel(self.data[0].x_label+" ("+self.data[0].x_units+")")
self.ax[0].set_ylabel(self.data[0].y_label+" ("+self.data[0].y_units+")")
for i in range(0,len(self.input_files)):
#new_data=[[float for y in range(self.data[0].y_len)] for x in range(self.data[0].x_len)]
#for x in range(0,self.data[i].x_len):
# for y in range(0,self.data[i].y_len):
# print(x,y,len(self.data[i].data[0]),len(self.data[i].data[0][0]))
# new_data[x][y]=self.data[i].data[0][x][y]
#z = 10 * outer(ones(size(data.x_scale)), cos(data.y_scale))
#im=self.ax[0].plot_surface(data.x_scale,data.y_scale,z)
#print(new_data)
#print(self.data[i].x_scale)
#print(self.data[i].y_scale)
X, Y = meshgrid( self.data[i].y_scale,self.data[i].x_scale)
Z = self.data[i].data[0]
# Plot the surface
im=self.ax[i].plot_wireframe( Y,X, Z)
#pcolor
elif dim=="heat":
self.ax[0].set_xlabel(self.data[0].x_label+" ("+self.data[0].x_units+")")
self.ax[0].set_ylabel(self.data[0].y_label+" ("+self.data[0].y_units+")")
for i in range(0,len(self.input_files)):
im=self.ax[0].pcolor(self.data[i].y_scale,self.data[i].x_scale,self.data[i].data[0])
self.fig.colorbar(im)
#pcolor
#self.fig.colorbar(im, shrink=0.5, aspect=5)
#self.ax[0].plot_surface(x, y, z, rstride=1, cstride=1, cmap=cm.coolwarm,linewidth=0, antialiased=False)
#self.ax[0].invert_yaxis()
#self.ax[0].xaxis.tick_top()
elif dim=="3d":
self.ax[0].set_xlabel(self.data[0].x_label+" ("+self.data[0].x_units+")")
self.ax[0].set_ylabel(self.data[0].y_label+" ("+self.data[0].y_units+")")
self.ax[0].set_zlabel(self.data[0].z_label+" ("+self.data[0].z_units+")")
for ii in range(0,len(self.data[i].z_scale)):
my_max,my_min=dat_file_max_min(self.data[i])
X, Y = meshgrid( self.data[i].x_scale,self.data[i].y_scale)
new_data=[[float for y in range(self.data[0].y_len)] for x in range(self.data[0].x_len)]
for x in range(0,self.data[i].x_len):
for y in range(0,self.data[i].y_len):
new_data[x][y]=self.data[i].z_scale[ii]+self.data[i].data[ii][x][y]
self.ax[i].contourf(X, Y, new_data, zdir='z')#
self.ax[i].set_xlim3d(0, self.data[i].x_scale[-1])
self.ax[i].set_ylim3d(0, self.data[i].y_scale[-1])
self.ax[i].set_zlim3d(0, self.data[i].z_scale[-1])
#setup the key
if self.data[0].legend_pos=="No key":
self.ax[i].legend_ = None
else:
if len(files)<40:
self.fig.legend(all_plots, files, self.data[0].legend_pos)
#self.fig.tight_layout(pad=0.0, w_pad=0.0, h_pad=0.0)
self.fig.canvas.draw()
def do_plot(self):
if len(self.data) == 0:
return
if self.data[0].valid_data == False:
return
key_text = []
self.plot_type = ""
#print(self.data[0].x_len,self.data[0].z_len,self.data[0].data)
if self.data[0].type == "rgb":
self.plot_type = "rgb"
elif self.data[0].type == "quiver":
self.plot_type = "quiver"
else:
if self.data[0].x_len == 1 and self.data[0].z_len == 1:
self.plot_type = "linegraph"
elif self.data[0].x_len > 1 and self.data[
0].y_len > 1 and self.data[0].z_len == 1:
if self.data[0].type == "3d":
self.plot_type = "wireframe"
if self.data[0].type == "heat":
self.plot_type = "heat"
elif self.data[0].x_len > 1 and self.data[
0].y_len > 1 and self.data[0].z_len > 1:
print("ohhh full 3D")
self.plot_type = "3d"
else:
print(_("I don't know how to process this type of file!"),
self.data[0].x_len, self.data[0].y_len,
self.data[0].z_len)
return
self.setup_axis()
all_plots = []
files = []
my_max = 1.0
if self.plot_type == "linegraph": #This is for the 1D graph case
self.ax[0].set_xlabel(self.data[0].y_label + " (" +
str(self.data[0].y_units) + ")")
self.ax[0].set_ylabel(self.data[0].data_label + " (" +
self.data[0].data_units + ")")
for i in range(0, len(self.data)):
if self.data[0].logy == True:
self.ax[i].set_xscale("log")
if self.data[0].logdata == True:
self.ax[i].set_yscale("log")
if self.data[i].data_min != None:
self.ax[i].set_ylim(
[self.data[i].data_min, self.data[i].data_max])
if self.data[i].rgb() != None:
col = "#" + self.data[i].rgb()
else:
col = get_color(i)
cur_plot, = self.ax[i].plot(self.data[i].y_scale,
self.data[i].data[0][0],
linewidth=3,
alpha=1.0,
color=col,
marker=get_marker(i))
#print(self.data[i].y_scale,self.data[i].data[0][0])
if self.data[i].key_text != "":
key_text.append(
"$" + numbers_to_latex(str(self.data[i].key_text)) +
" " +
pygtk_to_latex_subscript(self.data[0].key_units) + "$")
all_plots.append(cur_plot)
if len(self.data[i].labels) != 0:
#we only want this many data labels or it gets crowded
max_points = 12
n_points = range(0, len(self.data[i].y_scale))
if len(n_points) > max_points:
step = int(len(n_points) / max_points)
n_points = []
pos = 0
while (len(n_points) < max_points):
n_points.append(pos)
pos = pos + step
for ii in n_points:
label_text = self.data[i].labels[ii]
self.ax[i].annotate(label_text,
xy=(self.data[i].y_scale[ii],
self.data[i].data[0][0][ii]),
xytext=(-20, 20),
textcoords='offset points',
ha='right',
va='bottom',
bbox=dict(boxstyle='round,pad=0.5',
fc='yellow',
alpha=0.5),
arrowprops=dict(
arrowstyle='->',
connectionstyle='arc3,rad=0'))
#print(self.data[i].labels)
elif self.plot_type == "wireframe":
self.ax[0].set_xlabel('\n' + self.data[0].x_label + '\n (' +
self.data[0].x_units + ")")
self.ax[0].set_ylabel('\n' + self.data[0].y_label + '\n (' +
self.data[0].y_units + ")")
self.ax[0].set_zlabel('\n' + self.data[0].data_label + '\n (' +
self.data[0].data_units + ")")
self.log_3d_workaround()
if self.force_data_max == False:
my_max, my_min = dat_file_max_min(self.data[0])
for i in range(0, len(self.data)):
my_max, my_min = dat_file_max_min(self.data[i],
cur_min=my_min,
cur_max=my_max)
else:
my_max = self.force_data_max
my_min = self.force_data_min
self.ax[0].set_zlim(my_min, my_max)
for i in range(0, len(self.data)):
if self.data[i].logx == True:
self.ax[i].set_xscale("log")
if self.data[i].logy == True:
self.ax[i].set_yscale("log")
#if self.data[i].key_text!="":
key = "$" + numbers_to_latex(str(
self.data[i].key_text)) + " " + pygtk_to_latex_subscript(
self.data[0].key_units) + "$"
X, Y = meshgrid(self.data[i].y_scale, self.data[i].x_scale)
Z = self.data[i].data[0]
# Plot the surface
col = get_color(i)
#print(self.data[i].plot_type,"here")
if self.data[i].plot_type == "wireframe" or self.data[
i].plot_type == "":
im = self.ax[0].plot_wireframe(Y,
X,
array(Z),
color=col,
label=key,
clip_on=True)
elif self.data[i].plot_type == "contour":
im = self.ax[0].contourf(Y, X, array(Z), color=col)
elif self.data[i].plot_type == "heat":
my_max, my_min = dat_file_max_min(self.data[0])
im = self.ax[0].plot_surface(Y,
X,
array(Z),
linewidth=0,
vmin=my_min,
vmax=my_max,
cmap="hot",
antialiased=False)
self.ax[0].legend()
#im=self.ax[0].contourf( Y,X, Z,color=col)
#cset = ax.contourf(X, Y, Z, zdir='y', offset=40, cmap=cm.coolwarm)
elif self.plot_type == "heat":
self.ax[0].set_xlabel(self.data[0].y_label + " (" +
self.data[0].y_units + ")")
self.ax[0].set_ylabel(self.data[0].x_label + " (" +
self.data[0].x_units + ")")
my_max, my_min = dat_file_max_min(self.data[0])
for i in range(0, len(self.data)):
if self.data[i].logdata == True:
if my_min == 0:
my_min = 1.0
im = self.ax[0].pcolor(self.data[i].y_scale,
self.data[i].x_scale,
self.data[i].data[0],
norm=LogNorm(vmin=my_min,
vmax=my_max),
vmin=my_min,
vmax=my_max,
cmap="gnuplot")
else:
im = self.ax[0].pcolor(self.data[i].y_scale,
self.data[i].x_scale,
self.data[i].data[0],
vmin=my_min,
vmax=my_max,
cmap="gnuplot")
self.cb = self.fig.colorbar(im)
elif self.plot_type == "3d":
self.ax[0].set_xlabel(self.data[0].x_label + " (" +
self.data[0].x_units + ")")
self.ax[0].set_ylabel(self.data[0].y_label + " (" +
self.data[0].y_units + ")")
i = 0
y_scale = self.data[i].y_scale
x_scale = self.data[i].x_scale
X, Y = meshgrid(
y_scale, x_scale) #self.data[i].y_scale,self.data[i].x_scale
Z = self.data[i].data[0]
col = get_color(i)
my_max, my_min = dat_file_max_min(self.data[0])
elif self.plot_type == "rgb":
self.ax[0].set_xlabel(self.data[0].y_label + " (" +
str(self.data[0].y_units) + ")")
self.ax[0].set_ylabel(self.data[0].data_label + " (" +
self.data[0].data_units + ")")
self.ax[0].imshow(self.data[0].data[0]) #
#,extent=[self.data[0].y_scale[0],self.data[0].y_scale[-1],0,20]
elif self.plot_type == "quiver":
self.ax[0].set_xlabel(self.data[0].x_label + " (" +
self.data[0].x_units + ")")
self.ax[0].set_ylabel(self.data[0].y_label + " (" +
self.data[0].y_units + ")")
self.ax[0].set_zlabel(self.data[0].z_label + " (" +
self.data[0].z_units + ")")
X = []
Y = []
Z = []
U = []
V = []
W = []
mag = []
for d in self.data[0].data:
X.append(d.x)
Y.append(d.y)
Z.append(d.z)
U.append(d.dx)
V.append(d.dy)
W.append(d.dz)
mag.append(d.mag)
c = plt.cm.hsv(mag)
mag = []
for d in self.data[0].data:
mag.append(2.0)
self.ax[0].quiver(X, Y, Z, U, V, W, colors=c, linewidths=mag)
self.ax[0].set_xlim([0, self.data[0].xmax])
self.ax[0].set_ylim([0, self.data[0].ymax])
self.ax[0].set_zlim([0, self.data[0].zmax])
#setup the key
if self.data[0].legend_pos == "No key":
self.ax[i].legend_ = None
else:
if len(files) < 40:
self.fig.legend(all_plots, key_text, self.data[0].legend_pos)
if get_lock().is_trial() == True:
x = 0.25
y = 0.25
#while(x<1.0):
# y=0
# while(y<1.0):
self.fig.text(x,
y,
'gpvdm trial',
fontsize=20,
color='gray',
ha='right',
va='bottom',
alpha=self.watermark_alpha)
# y=y+0.1
# x=x+0.25
if self.hide_title == False:
title = self.data[0].title
if self.data[0].time != -1.0 and self.data[0].Vexternal != -1.0:
mul, unit = time_with_units(self.data[0].time)
title = title + " V=" + str(
self.data[0].Vexternal) + " " + _("time") + "=" + str(
self.data[0].time * mul) + " " + unit
self.fig.suptitle(title)
self.setWindowTitle(title + " - www.gpvdm.com")
self.fig.canvas.draw()