def test_raw_disk_blockresize():
"""
Test blockresize for raw type device which has backing chain element.
"""
new_size = params.get('expected_block_size')
result = virsh.blockresize(vm_name,
test_obj.snap_path_list[-1],
new_size,
debug=True)
libvirt.check_exit_status(result)
check_obj.check_image_info(test_obj.snap_path_list[-1], 'vsize',
new_size)
def run(test, params, env):
"""
Test virsh blockresize command for block device of domain.
1) Init the variables from params.
2) Create an image with specified format.
3) Attach a disk image to vm.
4) Test blockresize for the disk
5) Detach the disk
"""
# MAIN TEST CODE ###
# Process cartesian parameters
vm_name = params.get("main_vm", "virt-tests-vm1")
image_format = params.get("disk_image_format", "qcow2")
initial_disk_size = params.get("initial_disk_size", "500K")
status_error = "yes" == params.get("status_error", "yes")
resize_value = params.get("resize_value")
virsh_dargs = {'debug': True}
vm = env.get_vm(vm_name)
if vm.is_alive():
vm.destroy()
vm.start()
# Skip 'qed' cases for libvirt version greater than 1.1.0
if libvirt_version.version_compare(1, 1, 0):
if image_format == "qed":
raise error.TestNAError("QED support changed, check bug: "
"https://bugzilla.redhat.com/show_bug.cgi"
"?id=731570")
# Create an image.
tmp_dir = data_dir.get_tmp_dir()
image_path = os.path.join(tmp_dir, "blockresize_test")
logging.info("Create image: %s, "
"size %s, "
"format %s", image_path, initial_disk_size, image_format)
cmd = "qemu-img create -f %s %s %s" % (image_format, image_path,
initial_disk_size)
status, output = commands.getstatusoutput(cmd)
if status:
raise error.TestError("Creating image file %s failed: %s" %
(image_path, output))
# Hotplug the image as disk device
result = virsh.attach_disk(vm_name,
source=image_path,
target="vdd",
extra=" --subdriver %s" % image_format)
if result.exit_status:
raise error.TestError("Failed to attach disk %s to VM: %s." %
(image_path, result.stderr))
if resize_value == "over_size":
# Use byte unit for over_size test
resize_value = "%s" % OVER_SIZE + "b"
# Run the test
try:
result = virsh.blockresize(vm_name, image_path, resize_value,
**virsh_dargs)
status = result.exit_status
err = result.stderr.strip()
# Check status_error
if status_error:
if status == 0 or err == "":
raise error.TestFail("Expect failure, but run successfully!")
# No need to do more test
return
else:
if status != 0 or err != "":
# bz 1002813 will result in an error on this
err_str = "unable to execute QEMU command 'block_resize': Could not resize: Invalid argument"
if resize_value[-2] in "kb" and re.search(err_str, err):
raise error.TestNAError("BZ 1002813 not yet applied")
else:
raise error.TestFail("Run failed with right "
"virsh blockresize command")
# Although kb should not be used, libvirt/virsh will accept it and
# consider it as a 1000 bytes, which caused issues for qed & qcow2
# since they expect a value evenly divisible by 512 (hence bz 1002813).
if "kb" in resize_value:
value = int(resize_value[:-2])
if image_format in ["qed", "qcow2"]:
# qcow2 and qed want a VIR_ROUND_UP value based on 512 byte
# sectors - hence this less than visually appealing formula
expected_size = (((value * 1000) + 512 - 1) / 512) * 512
else:
# Raw images...
# Ugh - there's some rather ugly looking math when kb
# (or mb, gb, tb, etc.) are used as the scale for the
# value to create an image. The blockresize for the
# running VM uses a qemu json call which differs from
# qemu-img would do - resulting in (to say the least)
# awkward sizes. We'll just have to make sure we don't
# deviates more than a sector.
expected_size = value * 1000
elif "kib" in resize_value:
value = int(resize_value[:-3])
expected_size = value * 1024
elif resize_value[-1] in "b":
expected_size = int(resize_value[:-1])
elif resize_value[-1] in "k":
value = int(resize_value[:-1])
expected_size = value * 1024
elif resize_value[-1] == "m":
value = int(resize_value[:-1])
expected_size = value * 1024 * 1024
elif resize_value[-1] == "g":
value = int(resize_value[:-1])
expected_size = value * 1024 * 1024 * 1024
else:
raise error.TestError("Unknown scale value")
image_info = utils_misc.get_image_info(image_path)
actual_size = int(image_info['vsize'])
logging.info(
"The expected block size is %s bytes, "
"the actual block size is %s bytes", expected_size, actual_size)
# See comment above regarding Raw images
if image_format == "raw" and resize_value[-2] in "kb":
if abs(int(actual_size) - int(expected_size)) > 512:
raise error.TestFail("New raw blocksize set by blockresize do "
"not match the expected value")
else:
if int(actual_size) != int(expected_size):
raise error.TestFail("New blocksize set by blockresize is "
"different from actual size from "
"'qemu-img info'")
finally:
virsh.detach_disk(vm_name, target="vdd")
if os.path.exists(image_path):
os.remove(image_path)
def run(test, params, env):
"""
Test virsh blockresize command for block device of domain.
1) Init the variables from params.
2) Create an image with specified format.
3) Attach a disk image to vm.
4) Test blockresize for the disk
5) Detach the disk
"""
# MAIN TEST CODE ###
# Process cartesian parameters
vm_name = params.get("main_vm", "virt-tests-vm1")
image_format = params.get("disk_image_format", "qcow2")
initial_disk_size = params.get("initial_disk_size", "1M")
status_error = "yes" == params.get("status_error", "yes")
resize_value = params.get("resize_value")
virsh_dargs = {'debug': True}
# Create an image.
tmp_dir = data_dir.get_tmp_dir()
image_path = os.path.join(tmp_dir, "blockresize_test")
logging.info("Create image: %s, "
"size %s, "
"format %s", image_path, initial_disk_size, image_format)
cmd = "qemu-img create -f %s %s %s" % (image_format, image_path,
initial_disk_size)
status, output = commands.getstatusoutput(cmd)
if status:
raise error.TestError("Creating image file %s failed: %s" % \
(image_path, output))
# Hotplug the image as disk device
result = virsh.attach_disk(vm_name, source=image_path, target="vdd",
extra=" --subdriver %s" % image_format)
if result.exit_status:
raise error.TestError("Failed to attach disk %s to VM: %s." %
(image_path, result.stderr))
if resize_value == "over_size":
# Use byte unit for over_size test
resize_value = "%s" % OVER_SIZE + "b"
# Run the test
try:
result = virsh.blockresize(vm_name, image_path,
resize_value, **virsh_dargs)
status = result.exit_status
err = result.stderr.strip()
# Check status_error
if status_error:
if status == 0 or err == "":
raise error.TestFail("Expect failure, but run successfully!")
# No need to do more test
return
else:
if status != 0 or err != "":
raise error.TestFail("Run failed with right "
"virsh blockresize command")
if resize_value[-1] in "bkm":
expected_size = 1024*1024
elif resize_value[-1] == "g":
expected_size = 1024*1024*1024
else:
raise error.TestError("Unknown infomation of unit")
image_info = utils_misc.get_image_info(image_path)
actual_size = int(image_info['vsize'])
logging.info("The expected block size is %s bytes,"
"the actual block size is %s bytes",
expected_size, actual_size)
if int(actual_size) != int(expected_size):
raise error.TestFail("New blocksize set by blockresize is "
"different from actual size from "
"'qemu-img info'")
finally:
virsh.detach_disk(vm_name, target="vdd")
if os.path.exists(image_path):
os.remove(image_path)
def run(test, params, env):
"""
Test virsh blockresize command for block device of domain.
1) Init the variables from params.
2) Create an image with specified format.
3) Attach a disk image to vm.
4) Test blockresize for the disk
5) Detach the disk
"""
# MAIN TEST CODE ###
# Process cartesian parameters
vm_name = params.get("main_vm", "virt-tests-vm1")
image_format = params.get("disk_image_format", "qcow2")
initial_disk_size = params.get("initial_disk_size", "500K")
status_error = "yes" == params.get("status_error", "yes")
resize_value = params.get("resize_value")
virsh_dargs = {'debug': True}
# Skip 'qed' cases for libvirt version greater than 1.1.0
if libvirt_version.version_compare(1, 1, 0):
if image_format == "qed":
raise error.TestNAError("QED support changed, check bug: "
"https://bugzilla.redhat.com/show_bug.cgi"
"?id=731570")
# Create an image.
tmp_dir = data_dir.get_tmp_dir()
image_path = os.path.join(tmp_dir, "blockresize_test")
logging.info("Create image: %s, "
"size %s, "
"format %s", image_path, initial_disk_size, image_format)
cmd = "qemu-img create -f %s %s %s" % (image_format, image_path,
initial_disk_size)
status, output = commands.getstatusoutput(cmd)
if status:
raise error.TestError("Creating image file %s failed: %s"
% (image_path, output))
# Hotplug the image as disk device
result = virsh.attach_disk(vm_name, source=image_path, target="vdd",
extra=" --subdriver %s" % image_format)
if result.exit_status:
raise error.TestError("Failed to attach disk %s to VM: %s."
% (image_path, result.stderr))
if resize_value == "over_size":
# Use byte unit for over_size test
resize_value = "%s" % OVER_SIZE + "b"
# Run the test
try:
result = virsh.blockresize(vm_name, image_path,
resize_value, **virsh_dargs)
status = result.exit_status
err = result.stderr.strip()
# Check status_error
if status_error:
if status == 0 or err == "":
raise error.TestFail("Expect failure, but run successfully!")
# No need to do more test
return
else:
if status != 0 or err != "":
# bz 1002813 will result in an error on this
err_str = "unable to execute QEMU command 'block_resize': Could not resize: Invalid argument"
if resize_value[-2] in "kb" and re.search(err_str, err):
raise error.TestNAError("BZ 1002813 not yet applied")
else:
raise error.TestFail("Run failed with right "
"virsh blockresize command")
# Although kb should not be used, libvirt/virsh will accept it and
# consider it as a 1000 bytes, which caused issues for qed & qcow2
# since they expect a value evenly divisible by 512 (hence bz 1002813).
if "kb" in resize_value:
value = int(resize_value[:-2])
if image_format in ["qed", "qcow2"]:
# qcow2 and qed want a VIR_ROUND_UP value based on 512 byte
# sectors - hence this less than visually appealing formula
expected_size = (((value * 1000) + 512 - 1) / 512) * 512
else:
# Raw images...
# Ugh - there's some rather ugly looking math when kb
# (or mb, gb, tb, etc.) are used as the scale for the
# value to create an image. The blockresize for the
# running VM uses a qemu json call which differs from
# qemu-img would do - resulting in (to say the least)
# awkward sizes. We'll just have to make sure we don't
# deviates more than a sector.
expected_size = value * 1000
elif "kib" in resize_value:
value = int(resize_value[:-3])
expected_size = value * 1024
elif resize_value[-1] in "b":
expected_size = int(resize_value[:-1])
elif resize_value[-1] in "k":
value = int(resize_value[:-1])
expected_size = value * 1024
elif resize_value[-1] == "m":
value = int(resize_value[:-1])
expected_size = value * 1024 * 1024
elif resize_value[-1] == "g":
value = int(resize_value[:-1])
expected_size = value * 1024 * 1024 * 1024
else:
raise error.TestError("Unknown scale value")
image_info = utils_misc.get_image_info(image_path)
actual_size = int(image_info['vsize'])
logging.info("The expected block size is %s bytes, "
"the actual block size is %s bytes",
expected_size, actual_size)
# See comment above regarding Raw images
if image_format == "raw" and resize_value[-2] in "kb":
if abs(int(actual_size) - int(expected_size)) > 512:
raise error.TestFail("New raw blocksize set by blockresize do "
"not match the expected value")
else:
if int(actual_size) != int(expected_size):
raise error.TestFail("New blocksize set by blockresize is "
"different from actual size from "
"'qemu-img info'")
finally:
virsh.detach_disk(vm_name, target="vdd")
if os.path.exists(image_path):
os.remove(image_path)