def _loop_asynchronous(self, callback):
buf = win32file.AllocateReadBuffer(8192)
overlapped = pywintypes.OVERLAPPED()
overlapped.hEvent = win32event.CreateEvent(None, 0, 0, None)
while not self._stopped:
win32file.ReadDirectoryChangesW(self._hdir, buf, self._recurse,
self._filter, overlapped)
##
## This will block until notification OR timeout.
##
rc = win32event.WaitForSingleObject(overlapped.hEvent,
self._timeout)
if rc == win32event.WAIT_OBJECT_0:
## got event: determine data length ..
n = win32file.GetOverlappedResult(self._hdir, overlapped, True)
if n:
## retrieve data
results = win32file.FILE_NOTIFY_INFORMATION(buf, n)
r = [(DirWatcher._ACTIONS.get(x[0], "UNKNOWN"), x[1])
for x in results]
if len(r) > 0:
callback(r)
else:
# directory handled was closed
self._stopped = True
else:
## timeout
pass
def _watcherThreadOverlapped(self, dn, dh, changes):
flags = win32con.FILE_NOTIFY_CHANGE_FILE_NAME
buf = win32file.AllocateReadBuffer(8192)
overlapped = pywintypes.OVERLAPPED()
overlapped.hEvent = win32event.CreateEvent(None, 0, 0, None)
while 1:
win32file.ReadDirectoryChangesW(
dh,
buf,
False, #sub-tree
flags,
overlapped)
# Wait for our event, or for 5 seconds.
rc = win32event.WaitForSingleObject(overlapped.hEvent, 5000)
if rc == win32event.WAIT_OBJECT_0:
# got some data! Must use GetOverlappedResult to find out
# how much is valid! 0 generally means the handle has
# been closed. Blocking is OK here, as the event has
# already been set.
nbytes = win32file.GetOverlappedResult(dh, overlapped, True)
if nbytes:
bits = win32file.FILE_NOTIFY_INFORMATION(buf, nbytes)
changes.extend(bits)
else:
# This is "normal" exit - our 'tearDown' closes the
# handle.
# print "looks like dir handle was closed!"
return
else:
print("ERROR: Watcher thread timed-out!")
return # kill the thread!
def _read_watch(self, watch):
if win32event.WaitForSingleObject(watch.event, 0) \
== win32event.WAIT_TIMEOUT:
nbytes = 0
else:
nbytes = win32file.GetOverlappedResult(watch.handle,
watch.overlapped, False)
return win32file.FILE_NOTIFY_INFORMATION(watch.buffer, nbytes)
def read(self):
if win32event.WaitForSingleObject(self.event, 0) \
== win32event.WAIT_TIMEOUT:
result = []
else:
nbytes = win32file.GetOverlappedResult(self.handle,
self.overlapped, False)
result = win32file.FILE_NOTIFY_INFORMATION(self.buffer, nbytes)
self._start()
return result
def process_events(watch, num):
for action, name in win32file.FILE_NOTIFY_INFORMATION(watch._buf.raw, num):
action = action_map.get(action)
if action is not None and (action & watch.flags):
yield FSEvent(watch, action, name)
try:
read_changes(watch)
except pywintypes.error as e:
if e.args[0] == 5:
close_watch(watch)
yield FSEvent(watch, FSEvent.DeleteSelf)
else:
raise FSMonitorWindowsError(*e.args)
def run(self):
hDir = win32file.CreateFileW(
self._watch_path,
FILE_LIST_DIRECTORY,
win32con.FILE_SHARE_READ | win32con.FILE_SHARE_WRITE,
None,
win32con.OPEN_EXISTING,
win32con.FILE_FLAG_BACKUP_SEMANTICS |
win32con.FILE_FLAG_OVERLAPPED,
None
)
while self._windows_sucks_flag:
buf = win32file.AllocateReadBuffer(1024)
win32file.ReadDirectoryChangesW(
hDir,
buf,
True,
win32con.FILE_NOTIFY_CHANGE_FILE_NAME |
win32con.FILE_NOTIFY_CHANGE_DIR_NAME |
win32con.FILE_NOTIFY_CHANGE_SIZE |
win32con.FILE_NOTIFY_CHANGE_LAST_WRITE,
self._overlapped
)
result_stack = {}
rc = win32event.WaitForMultipleObjects((self._wait_stop,
self._overlapped.hEvent),
0, win32event.INFINITE)
if rc == win32event.WAIT_OBJECT_0:
# Stop event
break
data = win32file.GetOverlappedResult(hDir, self._overlapped, True)
# lets read the data and store it in the results
results = win32file.FILE_NOTIFY_INFORMATION(buf, data)
for action, afile in results:
if action in ACTIONS:
full_filename = os.path.join(self._watch_path, afile)
result_stack.setdefault(full_filename,
[]).append(ACTIONS.get(action))
keys = list(result_stack.keys())
while len(keys):
key = keys.pop(0)
event = result_stack.pop(key)
if (ADDED in event) and (DELETED in event):
event = [e for e in event if e not in (ADDED, DELETED)]
noticed = []
for each_event in event:
if each_event not in noticed:
self._callback(each_event, full_filename)
noticed.append(each_event)
def process_events(watch, num):
for action, name in win32file.FILE_NOTIFY_INFORMATION(
watch._buf.raw, num):
if action is not None and (
action & win32con.FILE_NOTIFY_CHANGE_FILE_NAME
| win32con.FILE_NOTIFY_CHANGE_LAST_WRITE):
yield FSEvent(watch, action, name)
try:
read_changes(watch)
except pywintypes.error, e:
if e.args[0] == 5:
close_watch(watch)
yield FSEvent(watch, FSEvent.DeleteSelf)
else:
raise FSMonitorWindowsError(*e.args)
def monitor_dir_async(file_path, handle_function, run, key):
dir_handle = get_dir_handle(file_path, True)
buffer = win32file.AllocateReadBuffer(BUF_SIZE)
overlapped = pywintypes.OVERLAPPED()
overlapped.hEvent = win32event.CreateEvent(None, False, 0, None)
while run.value:
read_dir_changes(dir_handle, buffer, overlapped)
rc = win32event.WaitForSingleObject(overlapped.hEvent, ASYNC_TIMEOUT)
if rc == win32event.WAIT_OBJECT_0:
bufer_size = win32file.GetOverlappedResult(dir_handle, overlapped,
True)
results = win32file.FILE_NOTIFY_INFORMATION(buffer, bufer_size)
handle_function(results, file_path, key)
elif rc == win32event.WAIT_TIMEOUT:
pass
win32api.CloseHandle(overlapped.hEvent)
dir_handle.close()
def _read_events(self):
"""Reads the events from the system and formats as ``DirWatcherEvent``.
:returns: List of ``(DirWatcherEvent, <path>)``
"""
result = []
while self._changed:
info = self._changed.popleft()
try:
size = win32file.GetOverlappedResult(info.file,
info.overlapped,
False)
except win32file.error as exc:
win32event.ResetEvent(info.overlapped.hEvent)
_LOGGER.warning(
'Failed to get directory changes for \'%s\': %s',
info.path, exc)
if exc.winerror == winerror.ERROR_ACCESS_DENIED:
self._preempt_watch(info, result)
continue
notifications = win32file.FILE_NOTIFY_INFORMATION(info.buffer,
size)
for action, path in notifications:
action_name = _ACTION_NAMES.get(action)
path = os.path.join(info.path, path)
if action_name is None:
_LOGGER.error('Received unknown action (%s, \'%s\')',
action, path)
continue
_LOGGER.debug('Received event (%s, \'%s\')', action_name, path)
event = _EVENTS.get(action_name)
if event is not None:
result.append((event, path))
win32event.ResetEvent(info.overlapped.hEvent)
if not self._read_dir(info):
self._preempt_watch(info, result)
return result
def main():
flags = win32con.FILE_NOTIFY_CHANGE_FILE_NAME
dh = win32file.CreateFile(
"C:\\", 0x0001, win32con.FILE_SHARE_READ | win32con.FILE_SHARE_WRITE
| win32con.FILE_SHARE_DELETE, None, win32con.OPEN_EXISTING,
win32con.FILE_FLAG_BACKUP_SEMANTICS | win32con.FILE_FLAG_OVERLAPPED,
None)
overlapped = pywintypes.OVERLAPPED()
overlapped.hEvent = win32event.CreateEvent(None, 0, 0, None)
buf = win32file.AllocateReadBuffer(8192)
changes = []
iterations = 0
timedout = False
while True:
iterations += 1
print(iterations)
if timedout == False: # This is to ensure the directory handle only has one instance of ReadDirectoryChangesW at a time.
# If this isn't here and ReadDirectoryChangesW stacks up without being used, it will break after 60-64 iterations if
# using a mapped network folder and the directory handle will need to be closed (dh.close()) and reopened.
win32file.ReadDirectoryChangesW(dh, buf, True, flags, overlapped)
rc = win32event.MsgWaitForMultipleObjects([overlapped.hEvent], False,
5000,
win32event.QS_ALLEVENTS)
# rc = win32event.WaitForSingleObject(overlapped.hEvent, 5000) # Also acceptable
# rc = win32event.WaitForMultipleObjects([overlapped.hEvent], False, 5000) # Also acceptable
if rc == win32event.WAIT_TIMEOUT:
timedout = True
print('timed out')
if rc == win32event.WAIT_OBJECT_0: # can replace win32event.WAIT_OBJECT_0 with the integer 0 (and win32event.WAIT_OBJECT_0+1 with 1)
timedout = False # since we got a result, reset the timedout variable so ReadDirectoryChangesW can be run again
result = win32file.GetOverlappedResult(dh, overlapped, True)
if result:
bufferData = win32file.FILE_NOTIFY_INFORMATION(buf, result)
changes.extend(bufferData)
print(bufferData)
for x in bufferData:
if x[1] == 'break': # for testing, create a file named "break" in the watched folder and the script will stop and print the list of files
print("\nFinal result!")
return changes
else:
print('dir handle closed')
def run_win32(self):
"""Generate notifications using pywin32"""
hdir = win32file.CreateFile(
self._path,
0x0001,
win32con.FILE_SHARE_READ | win32con.FILE_SHARE_WRITE,
None,
win32con.OPEN_EXISTING,
win32con.FILE_FLAG_BACKUP_SEMANTICS |
win32con.FILE_FLAG_OVERLAPPED,
None)
flags = (win32con.FILE_NOTIFY_CHANGE_FILE_NAME |
win32con.FILE_NOTIFY_CHANGE_DIR_NAME |
win32con.FILE_NOTIFY_CHANGE_ATTRIBUTES |
win32con.FILE_NOTIFY_CHANGE_SIZE |
win32con.FILE_NOTIFY_CHANGE_LAST_WRITE |
win32con.FILE_NOTIFY_CHANGE_SECURITY)
buf = win32file.AllocateReadBuffer(8192)
overlapped = pywintypes.OVERLAPPED()
overlapped.hEvent = win32event.CreateEvent(None, 0, 0, None)
handler = Handler()
while self._running:
win32file.ReadDirectoryChangesW(hdir, buf, True, flags, overlapped)
rc = win32event.WaitForSingleObject(overlapped.hEvent,
self._timeout)
if rc != win32event.WAIT_OBJECT_0:
continue
nbytes = win32file.GetOverlappedResult(hdir, overlapped, True)
if not nbytes:
continue
results = win32file.FILE_NOTIFY_INFORMATION(buf, nbytes)
for action, path in results:
if not self._running:
break
path = path.replace('\\', '/')
if (not path.startswith('.git/') and
'/.git/' not in path and os.path.isfile(path)):
handler.handle(path)
async def polling_task(self):
while True:
for item in self._watch_list:
try:
length = win32file.GetOverlappedResult(item[2], item[3], 0)
except pywintypes.error as e:
if e.args[0] == 996:
# Overlapped I/O event is not in a signaled state
continue
else:
raise e
else:
for action, name in win32file.FILE_NOTIFY_INFORMATION(
item[-1], length):
target = os.path.join(item[1], name)
if action == FILE_ACTION_MODIFIED and not os.path.isfile(
target):
# Ignore directory modify event
continue
elif action == FILE_ACTION_MODIFIED and os.path.isfile(
target):
dir_node = self._get_dir_node(item[1])
if name not in dir_node:
# Auto insert file create event
self._event_queue.put_nowait(
(target, item[0], FILE_ACTION_ADDED))
dir_node[name] = None
elif action == FILE_ACTION_REMOVED:
path = target
remove_root = target
while not os.path.exists(path):
# Get remove root
remove_root = path
path = os.path.dirname(path)
if self._get_dir_node(remove_root):
# Insert remove sub dirs/files event
def _handle_sub_dir(path):
dir_node = self._get_dir_node(path)
for it in dir_node:
if isinstance(dir_node[it], dict):
if dir_node[it]:
_handle_sub_dir(
os.path.join(path, it))
self._event_queue.put_nowait((
os.path.join(path, it),
EnumWatchType.WATCH_DIRECTORY,
action,
))
else:
self._event_queue.put_nowait((
os.path.join(path, it),
EnumWatchType.WATCH_FILE,
action,
))
_handle_sub_dir(remove_root)
self._event_queue.put_nowait((
remove_root,
EnumWatchType.WATCH_DIRECTORY,
action,
))
parent_dir_node = self._get_dir_node(
os.path.dirname(remove_root))
parent_dir_node.pop(
os.path.split(remove_root)[-1])
continue
self._event_queue.put_nowait((target, item[0], action))
if action == FILE_ACTION_ADDED and os.path.isdir(
target):
# Handle mkdir -p
def _handle_sub_dir(path):
dir_node = self._get_dir_node(path, True)
for it in os.listdir(path):
if it in dir_node:
continue
subpath = os.path.join(path, it)
if os.path.isdir(subpath):
watch_type = EnumWatchType.WATCH_DIRECTORY
dir_node[it] = {}
else:
watch_type = EnumWatchType.WATCH_FILE
dir_node[it] = None
self._event_queue.put_nowait(
(subpath, watch_type, action))
if os.path.isdir(subpath):
_handle_sub_dir(subpath)
dir_node = self._get_dir_node(item[1])
dir_node[name] = {}
_handle_sub_dir(target)
elif action == FILE_ACTION_ADDED and os.path.isfile(
target):
# Auto fire modify event
self._event_queue.put_nowait(
(target, item[0], FILE_ACTION_MODIFIED))
dir_node = self._get_dir_node(
os.path.dirname(target))
dir_node[os.path.split(target)[-1]] = None
# Continue to listen
self._add_dir_watch(item[2], item[4], item[3])
self._add_file_watch(item[2], item[4], item[3])
await asyncio.sleep(0.005)
import os, sys
import pywintypes
import win32file
import win32event
import win32con
import ntsecuritycon
overlapped = pywintypes.OVERLAPPED()
overlapped.hEvent = win32event.CreateEvent(None, 0, 0, None)
hDir = win32file.CreateFile(
"c:/temp", ntsecuritycon.FILE_LIST_DIRECTORY, win32file.FILE_SHARE_READ
| win32file.FILE_SHARE_WRITE | win32file.FILE_SHARE_DELETE, None,
win32con.OPEN_EXISTING,
win32con.FILE_FLAG_BACKUP_SEMANTICS | win32con.FILE_FLAG_OVERLAPPED, None)
buffer = win32file.AllocateReadBuffer(8192)
while True:
print "#0", win32file.ReadDirectoryChangesW(
hDir, buffer, True, win32con.FILE_NOTIFY_CHANGE_FILE_NAME, overlapped)
print "#1"
rc = win32event.WaitForSingleObject(overlapped.hEvent, 1000)
print "#2", rc
if rc == win32event.WAIT_OBJECT_0:
n_bytes = win32file.GetOverlappedResult(hDir, overlapped, True)
if n_bytes:
print win32file.FILE_NOTIFY_INFORMATION(buffer, n_bytes)
else:
break