class AudioOptions(SizedFrame):
def __init__(self):
super(AudioOptions, self).__init__(application.frame,
title='Audio Options')
p = self.GetContentsPane()
add_accelerator(self, 'ESCAPE', lambda event: self.Close(True))
self.default_volume = config.system['volume']
self.default_frequency = config.system['frequency']
self.default_pan = config.system['pan']
p.SetSizerType('form')
wx.StaticText(p, label='&Output Device')
self.device = wx.Choice(p,
choices=sorted(
application.output.get_device_names()))
self.device.SetStringSelection(config.system['output_device_name'])
self.device.Bind(
wx.EVT_CHOICE,
lambda event: set_output_device(self.device.GetStringSelection()))
wx.StaticText(p, label='&Volume')
self.volume = wx.Slider(p, style=wx.VERTICAL)
self.volume.SetValue(self.default_volume)
self.volume.Bind(wx.EVT_SLIDER,
lambda event: set_volume(self.volume.GetValue()))
wx.StaticText(p, label='&Pan')
self.pan = wx.Slider(p, style=wx.HORIZONTAL)
self.pan.SetValue(self.default_pan)
self.pan.Bind(wx.EVT_SLIDER,
lambda event: set_pan(self.pan.GetValue()))
wx.StaticText(p, label='&Frequency')
self.frequency = IntCtrl(p,
value=self.default_frequency,
min=min_frequency,
max=max_frequency,
limited=True)
self.frequency.Bind(EVT_INT, set_frequency(self.frequency.GetValue()))
add_accelerator(
self.frequency, 'UP', lambda event: self.update_frequency(
min(self.frequency.GetMax(),
self.frequency.GetValue() + 100)))
add_accelerator(
self.frequency, 'DOWN', lambda event: self.update_frequency(
max(self.frequency.GetMin(),
self.frequency.GetValue() - 100)))
self.ok = wx.Button(p, label='&OK')
self.ok.Bind(wx.EVT_BUTTON, lambda event: self.Close(True))
self.restore = wx.Button(p, label='&Restore Defaults')
self.restore.Bind(wx.EVT_BUTTON, self.on_restore)
self.Show(True)
self.Maximize(True)
def update_frequency(self, value):
"""Update frequency."""
self.frequency.SetValue(value)
set_frequency(value)
def on_restore(self, event):
"""Cancel button was pressed."""
set_volume(100)
set_pan(50)
set_frequency(44100)
class NumberEntryDialog(wx.Dialog):
def __init__(self,
parent,
message="Please enter a number.",
caption="Number Entry",
prompt="Number:",
value=None,
min=None,
max=None):
super(NumberEntryDialog, self).__init__(parent, title=caption)
kwargs = {
'parent': self,
'min': min,
'max': max,
'value': value,
'limited': True,
'allow_none': False,
}
self.intctrl = IntCtrl(
**{k: v
for k, v in kwargs.iteritems() if v is not None})
sizer = wx.BoxSizer(wx.VERTICAL)
if message:
sizer.Add(wx.StaticText(self, label=message),
flag=wx.ALL,
border=4)
hSizer = wx.BoxSizer(wx.HORIZONTAL)
if prompt:
hSizer.Add(wx.StaticText(self, label=prompt),
flag=wx.ALIGN_CENTER_VERTICAL)
hSizer.Add(self.intctrl, 1, flag=wx.EXPAND)
sizer.Add(hSizer, flag=wx.ALL | wx.EXPAND, border=4)
btnsizer = wx.StdDialogButtonSizer()
btn = wx.Button(self, wx.ID_OK)
btn.SetDefault()
btnsizer.AddButton(btn)
btn = wx.Button(self, wx.ID_CANCEL)
btnsizer.AddButton(btn)
btnsizer.Realize()
sizer.Add(btnsizer, 0, wx.ALIGN_CENTER_VERTICAL | wx.ALL, 5)
self.SetSizer(sizer)
self.SetSize(200, 50 * (2 + int(bool(message))))
#self.Fit()
self.CenterOnParent()
def SetValue(self, v):
self.intctrl.SetValue(v)
def GetValue(self):
return self.intctrl.GetValue()
class IntegerEditPanel(wx.Panel):
edits = Integral
def __init__(self, *args, **kwargs):
super(IntegerEditPanel, self).__init__(*args, **kwargs)
sizer = wx.BoxSizer(wx.HORIZONTAL)
self.intspin = wx.SpinCtrl(self,
style=wx.ALIGN_RIGHT | wx.SP_ARROW_KEYS)
self.intctrl = IntCtrl(self,
limited=True,
allow_long=True,
style=wx.ALIGN_RIGHT)
self.floatctrl = wx.TextCtrl(self, style=wx.ALIGN_RIGHT)
self.floatchk = wx.CheckBox(self, label='Treat as floating-point')
sizer.Add(self.intspin, flag=wx.ALIGN_CENTER_VERTICAL)
sizer.Add(self.intctrl, flag=wx.ALIGN_CENTER_VERTICAL)
sizer.Add(self.floatctrl, flag=wx.ALIGN_CENTER_VERTICAL)
sizer.Add(self.floatchk,
flag=wx.ALIGN_CENTER_VERTICAL | wx.LEFT,
border=10)
self.Bind(wx.EVT_CHECKBOX, self.OnFloatToggle, self.floatchk)
self.SetSizer(sizer)
def SetValue(self, value, kind):
self.kind = kind
self.Freeze()
self.floatchk.Value = False
self.floatctrl.Hide()
if type(value).maxval > sys.maxsize:
self.intspin.Hide()
self.intctrl.Show()
self.intctrl.SetBounds(type(value).minval, type(value).maxval)
self.intctrl.SetValue(long(value))
else:
self.intctrl.Hide()
self.intspin.Show()
self.intspin.SetRange(type(value).minval, type(value).maxval)
self.intspin.SetValue(value)
if kind.size in (4, 8):
self.floatchk.Show()
self.intfmt = kind.format[False]
self.floatfmt = FLOAT32.format[
False] if kind.size == 4 else FLOAT64.format[False]
else:
self.floatchk.Hide()
self.Layout()
self.Thaw()
def GetValue(self):
if self.intspin.Shown:
return self.kind(self.intspin.GetValue())
elif self.intctrl.Shown:
try:
return self.kind(self.intctrl.GetValue())
except ValueError, e:
raise ValueError, "%r" % e
else:
class ScopeConnection(wx.Panel):
"""This is the view and controller for connecting to the scope"""
def __init__(self, parent, env):
"""Initialize the panel for setting up the scope"""
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.BORDER_SIMPLE)
self.env = env
self.scope = self.env.scope_source
self.sizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(self.sizer)
input_host = wx.BoxSizer(wx.HORIZONTAL)
target_cpu = wx.BoxSizer(wx.HORIZONTAL)
scope_cpu = wx.BoxSizer(wx.HORIZONTAL)
buttons = wx.BoxSizer(wx.HORIZONTAL)
self.status = wx.StaticText(self, wx.ID_ANY, "")
font = self.status.GetFont()
font.SetWeight(wx.BOLD)
self.status.SetFont(font)
self.btn_enable = wx.Button(self, wx.ID_ANY, "")
self.btn_collect = wx.Button(self, wx.ID_ANY, "Collect")
buttons.Add(self.btn_enable, 1, wx.ALIGN_CENTER)
buttons.Add(self.btn_collect, 1, wx.ALIGN_CENTER)
lbl_server = wx.StaticText(self, wx.ID_ANY, "Scope Server")
self.txt_server = wx.TextCtrl(self, wx.ID_ANY, self.scope.server)
self.btn_connect = wx.Button(self, wx.ID_ANY, "Connect")
input_host.Add(lbl_server, 0, wx.ALIGN_CENTER | wx.RIGHT, 5)
input_host.Add(self.txt_server, 1, wx.EXPAND)
input_host.Add(self.btn_connect, 0, wx.EXPAND)
self.sizer.Add(self.status, 0, wx.EXPAND | wx.ALL, 5)
self.sizer.Add(input_host, 0,
wx.EXPAND | wx.BOTTOM | wx.LEFT | wx.RIGHT, 5)
self.choice_t_cpu = wx.Choice(self, wx.ID_ANY)
self._add_field("Target CPU", self.choice_t_cpu, small=True)
self.choice_s_cpu = wx.Choice(self, wx.ID_ANY)
self._add_field("Scope CPU", self.choice_s_cpu, small=True)
self.command = wx.TextCtrl(self, wx.ID_ANY, style=wx.TE_RIGHT)
self._add_field("Target Command", self.command)
self.command.Bind(wx.EVT_TEXT, self.onchange_capture_settings)
self.ta = wx.TextCtrl(self, wx.ID_ANY, style=wx.TE_RIGHT)
self._add_field("Target App", self.ta)
self.ta.Bind(wx.EVT_TEXT, self.onchange_capture_settings)
self.target_cbuf = wx.TextCtrl(self, wx.ID_ANY, style=wx.TE_RIGHT)
self._add_field("Target Trigger Buffer", self.target_cbuf)
self.target_cbuf.Bind(wx.EVT_TEXT, self.onchange_capture_settings)
self.msamples = IntCtrl(self, wx.ID_ANY, style=wx.TE_RIGHT)
self._add_field("Max # Samples", self.msamples, small=True)
self.msamples.Bind(wx.EVT_TEXT, self.onchange_capture_settings)
self.delta = IntCtrl(self, wx.ID_ANY, style=wx.TE_RIGHT)
self._add_field("Time Step", self.delta, small=True)
self.delta.Bind(wx.EVT_TEXT, self.onchange_capture_settings)
self.debug = wx.CheckBox(self, wx.ID_ANY)
self._add_field("Debug TA Calls", self.debug, small=True)
self.debug.Bind(wx.EVT_CHECKBOX, self.onchange_capture_settings)
self.sizer.Add(buttons, 0, wx.ALL | wx.CENTER, 5)
# Events
self.btn_enable.Bind(wx.EVT_BUTTON, self.onclick_btn_enable)
self.btn_connect.Bind(wx.EVT_BUTTON, self.onclick_btn_connect)
self.choice_t_cpu.Bind(wx.EVT_CHOICE, self.onchoice_t_cpu)
self.choice_s_cpu.Bind(wx.EVT_CHOICE, self.onchoice_s_cpu)
self.btn_collect.Bind(wx.EVT_BUTTON, self.onclick_btn_collect)
pub.subscribe(self.on_enable_changed, ScopeSource.ENABLED_CHANGED)
pub.subscribe(self.on_connect_changed, ScopeSource.CONNECTED_CHANGED)
pub.subscribe(self.on_capture_settings_changed,
ScopeSource.CAPTURE_SETTINGS_CHANGED)
pub.subscribe(self.on_readiness_changed,
CaptureSource.READINESS_CHANGED)
# Initial data
self.draw_status()
self.draw_capture_settings()
self.draw_collect_btn()
def _add_field(self, label, item, small=False):
"""Add a label/element pair to the UI"""
szr = wx.BoxSizer(wx.HORIZONTAL)
lbl = wx.StaticText(self, wx.ID_ANY, label)
szr.Add(lbl, 1 if small else 0, wx.ALIGN_CENTER)
szr.Add((15, 15), 0, wx.EXPAND)
szr.Add(item, 0 if small else 1, wx.ALIGN_RIGHT)
self.sizer.Add(szr, 0, wx.EXPAND | wx.BOTTOM | wx.LEFT | wx.RIGHT, 5)
def onclick_btn_connect(self, evt):
"""Connect button has been clicked."""
server = self.txt_server.GetValue()
if self.scope.is_connected():
self.scope.disconnect()
self.scope.connect(server)
def onclick_btn_enable(self, evt):
"""Enable button has been clicked."""
if not self.scope.is_enabled():
self.scope.enable()
else:
self.scope.disable()
def onclick_btn_collect(self, evt):
"""Collect button has been clicked."""
if self.env.get_active_dataset_name() is not None:
self.env.collection_pipeline.run(1)
def onchoice_t_cpu(self, evt):
"""The target CPU has changed."""
sel = self.choice_t_cpu.GetSelection()
if sel != wx.NOT_FOUND:
self.scope.set_target_core(sel)
def onchoice_s_cpu(self, evt):
"""The scope CPU has changed."""
sel = self.choice_s_cpu.GetSelection()
if sel != wx.NOT_FOUND:
self.scope.set_scope_core(sel)
def on_enable_changed(self):
"""The enable state of the scope has changed."""
self.draw_status()
def on_connect_changed(self):
"""The connection state of the scope has changed."""
self.draw_status()
self.draw_capture_settings()
def on_capture_settings_changed(self):
"""The capture settings have changed."""
self.draw_capture_settings()
def on_readiness_changed(self):
"""The readiness of the scope has changed."""
self.draw_collect_btn()
def onchange_capture_settings(self, evt):
"""The user is trying to change the capture settings."""
cmd = self.command.GetValue()
ta = self.ta.GetValue()
cbuf = self.target_cbuf.GetValue()
msamp = self.msamples.GetValue()
delta = self.delta.GetValue()
debug = self.debug.GetValue()
self.scope.set_capture_params(max_samples=msamp,
time_delta=delta,
ta_command=cmd,
ta_name=ta,
ta_cbuf=cbuf,
debug=debug)
def draw_status(self):
"""Update the state, buttons, and spinners based on current state"""
enabled = self.scope.is_enabled()
connected = self.scope.is_connected()
if enabled and connected:
scope_state = "Enabled"
elif connected and not enabled:
scope_state = "Connected and Disabled"
else:
scope_state = "Disconnected"
btn_label = "Disable" if enabled else "Enable"
scope_status = "Scope is %s" % scope_state
self.status.SetLabel(scope_status)
self.btn_connect.Enable(not enabled or not connected)
self.txt_server.Enable(not enabled or not connected)
self.btn_enable.SetLabel(btn_label)
self.btn_enable.Enable(connected)
ncores = self.scope.num_cores
cores = ["Core %u" % i for i in range(ncores)]
sel = self.choice_t_cpu.GetSelection()
if sel == wx.NOT_FOUND:
sel = self.scope.get_target_core()
self.choice_t_cpu.SetItems(cores)
if ncores > 0:
self.choice_t_cpu.SetSelection(sel)
self.choice_t_cpu.Enable(connected and not enabled)
sel = self.choice_s_cpu.GetSelection()
if sel == wx.NOT_FOUND:
sel = self.scope.get_scope_core()
self.choice_s_cpu.SetItems(cores)
if ncores > 0:
self.choice_s_cpu.SetSelection(sel)
self.choice_s_cpu.Enable(connected and not enabled)
def draw_capture_settings(self):
"""Draw the capture settings."""
enabled = self.scope.is_enabled()
connected = self.scope.is_connected()
self.command.ChangeValue(self.scope.ta_command)
self.ta.ChangeValue(self.scope.ta_name)
self.target_cbuf.ChangeValue(self.scope.ta_cbuf)
self.msamples.ChangeValue(self.scope.max_samples)
self.delta.ChangeValue(self.scope.time_delta)
self.debug.SetValue(self.scope.debug)
self.command.Enable(connected)
self.ta.Enable(connected)
self.target_cbuf.Enable(connected)
self.msamples.Enable(connected)
self.delta.Enable(connected)
self.debug.Enable(connected)
def draw_collect_btn(self):
"""Enable or disable the collection button"""
self.btn_collect.Enable(self.scope.is_ready())
class ProbeConfig(wx.Panel):
"""This is the view and controller for a single probe configuration"""
def __init__(self, parent, probe):
"""Initialization"""
wx.Panel.__init__(self, parent, wx.ID_ANY, style=wx.BORDER_SIMPLE)
self.probe = probe
sizer = wx.BoxSizer(wx.VERTICAL)
assoc = wx.BoxSizer(wx.HORIZONTAL)
nset = wx.BoxSizer(wx.HORIZONTAL)
line = wx.BoxSizer(wx.HORIZONTAL)
capt = wx.BoxSizer(wx.HORIZONTAL)
btns = wx.BoxSizer(wx.HORIZONTAL)
self.status = wx.StaticText(self, wx.ID_ANY, "Probe is Active")
font = self.status.GetFont()
font.SetWeight(wx.BOLD)
self.status.SetFont(font)
lbl_assoc = wx.StaticText(self, wx.ID_ANY, "Associativity")
self.int_assoc = IntCtrl(self, wx.ID_ANY)
self.int_assoc.SetValue(self.probe.associativity)
assoc.Add(lbl_assoc, 1, wx.ALIGN_CENTER | wx.RIGHT, 5)
assoc.Add(self.int_assoc, 0, wx.ALIGN_RIGHT)
lbl_nset = wx.StaticText(self, wx.ID_ANY, "Number of Sets")
self.int_nset = IntCtrl(self, wx.ID_ANY)
self.int_nset.SetValue(self.probe.num_sets)
nset.Add(lbl_nset, 1, wx.ALIGN_CENTER | wx.RIGHT, 5)
nset.Add(self.int_nset, 0, wx.ALIGN_RIGHT)
lbl_line = wx.StaticText(self, wx.ID_ANY, "Size of Line")
self.int_line = IntCtrl(self, wx.ID_ANY)
self.int_line.SetValue(self.probe.line_size)
line.Add(lbl_line, 1, wx.ALIGN_CENTER | wx.RIGHT, 5)
line.Add(self.int_line, 0, wx.ALIGN_RIGHT)
lbl_capt = wx.StaticText(self, wx.ID_ANY, "Capture Limits:")
lbl_lp = wx.StaticText(self, wx.ID_ANY, "[")
self.spn_lo = wx.SpinButton(self, wx.ID_ANY)
lbl_cm = wx.StaticText(self, wx.ID_ANY, ",")
self.spn_hi = wx.SpinButton(self, wx.ID_ANY)
lbl_rp = wx.StaticText(self, wx.ID_ANY, ")")
self.btn_config = wx.Button(self, wx.ID_ANY, "Configure")
capt.Add(lbl_capt, 3, wx.ALIGN_CENTER)
capt.Add(lbl_lp, 0, wx.ALIGN_CENTER)
capt.Add(self.spn_lo, 1, wx.ALIGN_CENTER)
capt.Add(lbl_cm, 0, wx.ALIGN_CENTER)
capt.Add(self.spn_hi, 1, wx.ALIGN_CENTER)
capt.Add(lbl_rp, 0, wx.ALIGN_CENTER)
capt.Add(self.btn_config, 0, wx.ALIGN_CENTER)
self.btn_enable = wx.Button(self, wx.ID_ANY, "Enable")
btns.Add(self.btn_enable, 0, wx.ALL, 5)
sizer.Add(self.status, 0, wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
sizer.Add(assoc, 0, wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
sizer.Add(nset, 0, wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
sizer.Add(line, 0, wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
sizer.Add(capt, 0, wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
sizer.Add(btns, 0, wx.ALIGN_CENTER | wx.ALL, 5)
self.SetSizer(sizer)
sizer.SetSizeHints(self)
# Events
self.btn_enable.Bind(wx.EVT_BUTTON, self.onclick_btn_enable)
self.btn_config.Bind(wx.EVT_BUTTON, self.onclick_btn_config)
pub.subscribe(self.on_enable_changed, Probe.ENABLED_CHANGED)
pub.subscribe(self.on_enable_changed, Probe.CONFIG_CHANGED)
# Initial data
self.on_enable_changed()
def set_status(self):
"""Display the status of the probe."""
name = self.probe.name
status = "Probe %s is active" % name
self.status.SetLabel(status)
def onclick_btn_enable(self, evt):
"""Enable button has been clicked."""
if not self.probe.is_enabled():
assoc = self.int_assoc.GetValue()
nset = self.int_nset.GetValue()
lsize = self.int_line.GetValue()
self.probe.enable(assoc, nset, lsize)
else:
self.probe.disable()
def onclick_btn_config(self, evt):
"""Configure button has been clicked."""
lo = self.spn_lo.GetValue()
hi = self.spn_hi.GetValue()
if not self.probe.configure(lo, hi):
msg = wx.MessageDialog(
self, 'Failed to configure probe %s' % self.probe.name,
'Failure', wx.OK)
msg.ShowModal()
msg.Destroy()
def on_enable_changed(self, name=None):
"""The enable state of the scope has changed."""
if name is not None and self.probe.name != name:
return
enabled = self.probe.is_enabled()
prb_state = "Enabled" if enabled else "Disabled"
btn_status = "Disable" if enabled else "Enable"
prb_status = "Probe %s is %s" % (self.probe.name, prb_state)
self.status.SetLabel(prb_status)
self.btn_enable.SetLabel(btn_status)
self.int_assoc.Enable(not enabled)
self.int_nset.Enable(not enabled)
self.int_line.Enable(not enabled)
self.spn_lo.Enable(enabled)
self.spn_hi.Enable(enabled)
self.btn_config.Enable(enabled)
self.spn_lo.SetRange(0, self.probe.num_sets)
self.spn_hi.SetRange(0, self.probe.num_sets)
self.spn_lo.SetValue(self.probe.low_set)
self.spn_hi.SetValue(self.probe.high_set)
class ClippyFrame(wx.Frame):
def __init__(self, parent, title):
self.port = 0
self.init_clippy()
### Frame
wx.Frame.__init__(self,
parent,
title=title,
size=(300, 200),
style=wx.SYSTEM_MENU | wx.CAPTION | wx.CLOSE_BOX)
### Menu
fileMenu = wx.Menu()
menuAbout = fileMenu.Append(
wx.ID_ABOUT, "&About",
"developed by Rahul Madhavan ([email protected])")
menuExit = fileMenu.Append(wx.ID_EXIT, "&Exit", "Adios !!!")
menuBar = wx.MenuBar()
menuBar.Append(fileMenu, "File")
self.SetMenuBar(menuBar)
self.Bind(wx.EVT_MENU, self.OnAbout, menuAbout)
self.Bind(wx.EVT_MENU, self.OnExit, menuExit)
### UI Elements
self.current_port_no_label = wx.StaticText(self, wx.ID_ANY,
"Current Port No : ")
self.port_text_box = IntCtrl(self,
wx.ID_ANY,
value=self.port,
min=1000,
max=100000)
self.port_no_label = wx.StaticText(self, wx.ID_ANY, " Port No : ")
self.current_port = wx.StaticText(self, wx.ID_ANY, str(self.port))
self.restart_button = wx.Button(self, -1, "Restart Clippy")
self.restart_button.Disable()
### Binders
self.Bind(wx.EVT_BUTTON, self.OnRestart, self.restart_button)
self.Bind(wx.EVT_TEXT, self.OnTextChange, self.port_text_box)
### Sizers
flex_sizer = wx.FlexGridSizer(2, 2, 20, 35)
flex_sizer.AddMany([(self.current_port_no_label),
(self.current_port, 1, wx.EXPAND),
(self.port_no_label),
(self.port_text_box, 1, wx.EXPAND)])
v_sizer = wx.BoxSizer(wx.VERTICAL)
v_sizer.Add(flex_sizer, 1, wx.EXPAND)
v_sizer.Add(self.restart_button, 1, wx.EXPAND | wx.ALIGN_CENTER)
f_sizer = wx.BoxSizer(wx.VERTICAL)
f_sizer.Add(v_sizer, 1, wx.EXPAND | wx.ALL, 20)
self.SetSizer(f_sizer)
self.Show()
def OnAbout(self, event):
dlg = wx.MessageDialog(
self,
"developed by Rahul Madhavan ([email protected])",
"Clippy",
style=wx.ICON_INFORMATION)
dlg.ShowModal()
dlg.Destroy()
def OnExit(self, event):
self.Close(True)
def OnRestart(self, e):
self.watcher.stop()
self.receiver.stop()
port = self.port_text_box.GetValue()
self.persist_json_config({'port': port})
self.init_clippy()
self.current_port.SetLabelText(str(self.port))
self.restart_button.Disable()
def OnTextChange(self, e):
temp_port = self.port_text_box.GetValue()
if self.port != temp_port and self.port_text_box.IsInBounds():
self.restart_button.Enable()
else:
self.restart_button.Disable()
def init_clippy(self):
self.msg = Msg("")
config = self.fetch_clippy_configuration()
port = config["port"]
self.port = port
print "USING PORT : " + str(port)
self.watcher = ClippyWatcher(self.msg, port)
self.receiver = ClippyReceiver(self.msg, port)
self.watcher.daemon = True
self.receiver.daemon = True
self.watcher.start()
self.receiver.start()
def fetch_clippy_configuration(self):
config = {}
data_dir = wx.StandardPaths.Get().GetUserDataDir()
filename = CONFIG_FILE
file_abs_path = os.path.join(data_dir, filename)
if os.path.isfile(file_abs_path):
fp = open(file_abs_path, 'r')
str = fp.read()
config = json.loads(str)
else:
print "config file not found"
config = self.create_json_config()
return config
def persist_json_config(self, config):
data_dir = wx.StandardPaths.Get().GetUserDataDir()
filename = CONFIG_FILE
file_abs_path = os.path.join(data_dir, filename)
with open(file_abs_path, 'w') as outfile:
json.dump(config, outfile)
return config
def create_json_config(self):
config = {"port": MCAST_PORT}
data_dir = wx.StandardPaths.Get().GetUserDataDir()
filename = CONFIG_FILE
file_abs_path = os.path.join(data_dir, filename)
if not os.path.exists(data_dir):
os.makedirs(data_dir)
with open(file_abs_path, 'w') as outfile:
json.dump(config, outfile)
return config