def _create_window(self):
# Setup the spectrum plot
frequencies = linspace(0., float(SAMPLING_RATE)/2, num=NUM_SAMPLES/2)
self.spectrum_data = ArrayPlotData(frequency=frequencies)
empty_amplitude = zeros(NUM_SAMPLES/2)
self.spectrum_data.set_data('amplitude', empty_amplitude)
self.spectrum_plot = Plot(self.spectrum_data)
self.spectrum_plot.plot(("frequency", "amplitude"), name="Spectrum", color="red")
self.spectrum_plot.padding = 50
self.spectrum_plot.title = "Spectrum"
spec_range = self.spectrum_plot.plots.values()[0][0].value_mapper.range
spec_range.low = 0.0
spec_range.high = 5.0
self.spectrum_plot.index_axis.title = 'Frequency (hz)'
self.spectrum_plot.value_axis.title = 'Amplitude'
# Time Series plot
times = linspace(0., float(NUM_SAMPLES)/SAMPLING_RATE, num=NUM_SAMPLES)
self.time_data = ArrayPlotData(time=times)
empty_amplitude = y_values = zeros(NUM_SAMPLES)
self.time_data.set_data('amplitude', empty_amplitude)
self.time_plot = Plot(self.time_data)
self.time_plot.plot(("time", "amplitude"), name="Time", color="blue")
self.time_plot.padding = 50
self.time_plot.title = "Time"
self.time_plot.index_axis.title = 'Time (seconds)'
self.time_plot.value_axis.title = 'Amplitude'
time_range = self.time_plot.plots.values()[0][0].value_mapper.range
time_range.low = -0.2
time_range.high = 0.2
# Spectrogram plot
spectrogram_data = zeros(( NUM_SAMPLES/2, SPECTROGRAM_LENGTH))
self.spectrogram_plotdata = ArrayPlotData()
self.spectrogram_plotdata.set_data('imagedata', spectrogram_data)
spectrogram_plot = Plot(self.spectrogram_plotdata)
spectrogram_time = linspace(0., float(SPECTROGRAM_LENGTH*NUM_SAMPLES)/float(SAMPLING_RATE), num=SPECTROGRAM_LENGTH)
spectrogram_freq = linspace(0., float(SAMPLING_RATE/2), num=NUM_SAMPLES/2)
spectrogram_plot.img_plot('imagedata',
name='Spectrogram',
xbounds=spectrogram_time,
ybounds=spectrogram_freq,
colormap=jet,
)
range_obj = spectrogram_plot.plots['Spectrogram'][0].value_mapper.range
range_obj.high = 5
range_obj.low = 0.0
spectrogram_plot.title = 'Spectrogram'
self.spectrogram_plot = spectrogram_plot
container = HPlotContainer()
container.add(self.spectrum_plot)
container.add(self.time_plot)
container.add(spectrogram_plot)
# Set the timer to generate events to us
timerId = wx.NewId()
self.timer = wx.Timer(self, timerId)
self.Bind(wx.EVT_TIMER, self.onTimer, id=timerId)
self.timer.Start(2500.0, wx.TIMER_CONTINUOUS)
return Window(self, -1, component=container)
def __init__(self,
parent,
parent2,
tbstyle,
windowstyle,
closingstyle,
scrollType=TB_SCR_TYPE_DU):
"""
Default class constructor.
Used internally. Do not call directly this class in your application!
:param `parent`: the window parent;
:param `parent2`: the :class:`ToasterBox` calling this window;
:param `tbstyle`: the :class:`ToasterBoxWindow` main style. Can be one of the following
bits:
====================== ======= ================================
`ToasterBox` Style Value Description
====================== ======= ================================
``TB_SIMPLE`` 0x1 A simple :class:`ToasterBox`, with background image and text customization can be created
``TB_COMPLEX`` 0x2 `ToasterBoxes` with different degree of complexity can be created. You can add as many controls as you want, provided that you call the :meth:`~ToasterBoxWindow.AddPanel` method and pass to it a dummy frame and a :class:`Panel`.
====================== ======= ================================
:param `windowstyle`: this parameter influences the visual appearance of
:class:`ToasterBoxWindow`, and can be one of the following styles:
====================== ========== ================================
Window Style Hex Value Description
====================== ========== ================================
``TB_DEFAULT_STYLE`` 0x2008002 Default window style for :class:`ToasterBox`, with no caption nor close box.
``TB_CAPTION`` 0x22009806 :class:`ToasterBox` will have a caption, with the possibility to set a title for the :class:`ToasterBox` frame, and a close box.
====================== ========== ================================
:param `closingstyle`: the closing style for :class:`ToasterBoxWindow`. Can be one of the
following bits:
==================== =========== ==================================================
Closing Styles Hex Value Description
==================== =========== ==================================================
``TB_ONTIME`` 0x1 :class:`ToasterBox` will close after a specified amount of time.
``TB_ONCLICK`` 0x2 :class:`ToasterBox` can be closed by clicking anywhere on the :class:`ToasterBox` frame.
==================== =========== ==================================================
:param `scrollType`: the scrolling direction for :class:`ToasterBoxWindow`. Can be one of the
following bits:
==================== =========== ==================================================
Scroll Styles Hex Value Description
==================== =========== ==================================================
``TB_SCR_TYPE_UD`` 0x1 :class:`ToasterBox` will scroll from up to down
``TB_SCR_TYPE_DU`` 0x2 :class:`ToasterBox` will scroll from down to up
``TB_SCR_TYPE_FADE`` 0x4 :class:`ToasterBox` will fade in/out (without scrolling).
==================== =========== ==================================================
"""
wx.Frame.__init__(self,
parent,
wx.ID_ANY,
"window",
wx.DefaultPosition,
wx.DefaultSize,
style=windowstyle | wx.CLIP_CHILDREN)
self._starttime = int(time.time())
self._parent2 = parent2
self._parent = parent
self._sleeptime = 10
self._step = 4
self._pausetime = 1700
self._textcolour = wx.BLACK
self._popuptext = "Change Me!"
# the size we want the dialog to be
framesize = wx.Size(150, 170)
self._count = 1
self._tbstyle = tbstyle
self._windowstyle = windowstyle
self._closingstyle = closingstyle
self._backgroundcolour = wx.WHITE
if tbstyle == TB_COMPLEX:
self.sizer = wx.BoxSizer(wx.VERTICAL)
else:
self._staticbitmap = None
if self._windowstyle == TB_CAPTION:
self.Bind(wx.EVT_CLOSE, self.OnClose)
self.SetTitle("")
if scrollType == TB_SCR_TYPE_FADE and not self.CanSetTransparent():
import warnings
warnings.warn(
"The style ``TB_SCR_TYPE_FADE`` is not supported on this platform."
)
scrollType = TB_SCR_TYPE_DU
self._scrollType = scrollType
if self._closingstyle & TB_ONCLICK and self._windowstyle != TB_CAPTION:
self.Bind(wx.EVT_LEFT_DOWN, self.OnMouseDown)
self._bottomright = wx.Point(wx.GetDisplaySize().GetWidth(),
wx.GetDisplaySize().GetHeight())
self.SetSize(self._bottomright.x, self._bottomright.y,
framesize.GetWidth(), framesize.GetHeight())
self._scrollTimer = wx.Timer(self, -1)
self._alphaTimer = wx.Timer(self, -1)
self.Bind(wx.EVT_TIMER, self.OnScrollTimer, self._scrollTimer)
self.Bind(wx.EVT_TIMER, self.AlphaCycle, self._alphaTimer)
if not self._tbstyle & TB_COMPLEX:
self.Bind(wx.EVT_PAINT, self.OnPaint)
self.SetBackgroundStyle(wx.BG_STYLE_CUSTOM)
def __init__(self,
parent=None,
id=wx.ID_ANY,
h5in=None,
eiger_host="192.168.163.204",
eiger_api_ver="1.6.1",
bl="BL32XU",
monitor_interval=5.):
wx.Frame.__init__(self,
parent=parent,
id=id,
title="Adxv launcher for Eiger",
size=(500, 500))
self.adxv_proc = None # subprocess object
self.h5file = h5in
self.n_images = -1
self.adxv = adxv.Adxv()
self.last_monitor_image = None
self.bl = bl
vbox = wx.BoxSizer(wx.VERTICAL)
notebook = wx.Notebook(self, wx.ID_ANY)
panel1 = wx.Panel(notebook, wx.ID_ANY)
panel2 = wx.Panel(notebook, wx.ID_ANY)
# panel1
vbox0 = wx.BoxSizer(wx.VERTICAL)
hbox00 = wx.BoxSizer(wx.HORIZONTAL)
hbox00.Add(wx.StaticText(panel1, wx.ID_ANY, "File: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.cmbInfile = wx.ComboBox(panel1, wx.ID_ANY, size=(350, 25))
self.cmbInfile.Bind(wx.EVT_COMBOBOX, self.cmbInfile_onChange)
self.cmbInfile.Bind(wx.EVT_TEXT_ENTER, self.cmbInfile_onChange)
hbox00.Add(self.cmbInfile, 1, flag=wx.EXPAND | wx.RIGHT)
self.btnInfile = wx.Button(panel1, wx.ID_ANY, "...", size=(25, 25))
self.btnInfile.Bind(wx.EVT_BUTTON, self.btnInfile_click)
self.btnLatest = wx.Button(panel1, wx.ID_ANY, "Latest", size=(50, 25))
self.btnLatest.Bind(wx.EVT_BUTTON, self.btnLatest_click)
hbox00.Add(self.btnInfile)
hbox00.Add(self.btnLatest)
vbox0.Add(hbox00, flag=wx.EXPAND | wx.TOP, border=4)
hbox01 = wx.BoxSizer(wx.HORIZONTAL)
hbox01.Add(wx.StaticText(panel1, wx.ID_ANY, "Frame no: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.cmbFrame = wx.ComboBox(panel1,
wx.ID_ANY,
size=(100, 25),
value="1")
self.cmbFrame.Bind(wx.EVT_COMBOBOX, self.onTextEnter)
self.cmbFrame.Bind(wx.EVT_TEXT_ENTER, self.onTextEnter)
hbox01.Add(self.cmbFrame, flag=wx.EXPAND | wx.RIGHT)
self.llbtn = wx.Button(panel1, wx.ID_ANY, "<<")
hbox01.Add(self.llbtn, flag=wx.EXPAND | wx.RIGHT)
self.lbtn = wx.Button(panel1, wx.ID_ANY, "<")
hbox01.Add(self.lbtn, flag=wx.EXPAND | wx.RIGHT)
self.rbtn = wx.Button(panel1, wx.ID_ANY, ">")
hbox01.Add(self.rbtn, flag=wx.EXPAND | wx.RIGHT)
self.rrbtn = wx.Button(panel1, wx.ID_ANY, ">>")
hbox01.Add(self.rrbtn, flag=wx.EXPAND | wx.RIGHT)
vbox0.Add(hbox01, flag=wx.EXPAND | wx.TOP, border=4)
self.lbtn.Bind(wx.EVT_BUTTON, lambda e: self.next_or_back(-1))
self.rbtn.Bind(wx.EVT_BUTTON, lambda e: self.next_or_back(+1))
self.llbtn.Bind(wx.EVT_BUTTON, lambda e: self.play(-1))
self.rrbtn.Bind(wx.EVT_BUTTON, lambda e: self.play(+1))
hbox02 = wx.BoxSizer(wx.HORIZONTAL)
hbox02.Add(wx.StaticText(panel1, wx.ID_ANY, "Binning: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.txtBin = wx.TextCtrl(panel1,
wx.ID_ANY,
size=(100, 25),
style=wx.TE_PROCESS_ENTER)
self.txtBin.SetValue("1")
self.txtBin.Bind(wx.EVT_TEXT_ENTER, self.onTextEnter)
hbox02.Add(self.txtBin, flag=wx.EXPAND | wx.RIGHT)
vbox0.Add(hbox02, flag=wx.EXPAND | wx.TOP, border=4)
panel1.SetSizer(vbox0)
notebook.InsertPage(0, panel1, "File")
# panel2
vbox1 = wx.BoxSizer(wx.VERTICAL)
#hbox10 = wx.BoxSizer(wx.HORIZONTAL)
#hbox10.Add(wx.StaticText(panel2, wx.ID_ANY, "Wavelength: "), flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL)
#self.txtMonWavelen = wx.TextCtrl(panel2, wx.ID_ANY, size=(100,25))
#self.txtMonWavelen.SetValue("1.0000")
#hbox10.Add(self.txtMonWavelen, flag=wx.EXPAND|wx.RIGHT)
#hbox10.Add(wx.StaticText(panel2, wx.ID_ANY, " Distance: "), flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL)
#self.txtMonDistance = wx.TextCtrl(panel2, wx.ID_ANY, size=(100,25))
#self.txtMonDistance.SetValue("300.0")
#hbox10.Add(self.txtMonDistance, flag=wx.EXPAND|wx.RIGHT)
#vbox1.Add(hbox10, flag=wx.EXPAND|wx.TOP, border=4)
hbox11 = wx.BoxSizer(wx.HORIZONTAL)
#hbox11.Add(wx.StaticText(panel2, wx.ID_ANY, "Beam center: "), flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL)
#self.txtMonBeamxy = wx.TextCtrl(panel2, wx.ID_ANY, size=(150,25))
#self.txtMonBeamxy.SetValue("1550, 1634.5")
#hbox11.Add(self.txtMonBeamxy, flag=wx.EXPAND|wx.RIGHT)
self.btnMonRefresh = wx.Button(panel2, wx.ID_ANY, "Start monitoring")
self.btnMonRefresh.Bind(wx.EVT_BUTTON, self.on_btnMonRefresh)
self.btnMonStop = wx.Button(panel2, wx.ID_ANY, "Stop")
self.btnMonStop.Bind(wx.EVT_BUTTON,
lambda e: self.monitor_timer.Stop())
self.txtMonInterval = wx.TextCtrl(panel2,
wx.ID_ANY,
"%.1f" % monitor_interval,
size=(50, 25))
hbox11.Add(self.btnMonRefresh, flag=wx.EXPAND | wx.RIGHT)
hbox11.Add(self.btnMonStop, flag=wx.EXPAND | wx.RIGHT)
hbox11.Add(wx.StaticText(panel2, wx.ID_ANY, " interval: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
hbox11.Add(self.txtMonInterval, flag=wx.EXPAND | wx.RIGHT)
hbox11.Add(wx.StaticText(panel2, wx.ID_ANY, " sec."),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
vbox1.Add(hbox11, flag=wx.EXPAND | wx.TOP, border=4)
hbox12 = wx.BoxSizer(wx.HORIZONTAL)
self.chkMonRaiseW = wx.CheckBox(panel2, wx.ID_ANY,
"Raise adxv windows")
self.chkMonRaiseW.SetValue(1)
hbox12.Add(self.chkMonRaiseW, flag=wx.EXPAND | wx.RIGHT)
vbox1.Add(hbox12, flag=wx.EXPAND | wx.TOP, border=4)
hbox13 = wx.BoxSizer(wx.HORIZONTAL)
hbox13.Add(wx.StaticText(panel2, wx.ID_ANY, "Eiger DCU host: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.txtEigerHost = wx.TextCtrl(panel2,
wx.ID_ANY,
eiger_host,
size=(150, 25))
hbox13.Add(self.txtEigerHost)
hbox13.Add(wx.StaticText(panel2, wx.ID_ANY, " API ver.: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.txtEigerAPIver = wx.TextCtrl(panel2,
wx.ID_ANY,
eiger_api_ver,
size=(100, 25))
hbox13.Add(self.txtEigerAPIver)
vbox1.Add(hbox13, flag=wx.EXPAND | wx.TOP, border=4)
panel2.SetSizer(vbox1)
notebook.InsertPage(1, panel2, "Monitor")
notebook.Bind(wx.EVT_NOTEBOOK_PAGE_CHANGED,
self.on_notebook_page_changed)
vbox.Add(notebook, flag=wx.EXPAND)
self.txtInfo = wx.TextCtrl(self, wx.ID_ANY, style=wx.TE_MULTILINE)
self.txtInfo.SetFont(wx.Font(12, wx.MODERN, wx.NORMAL, wx.NORMAL))
self.txtInfo.SetEditable(False)
vbox.Add(self.txtInfo, 1, flag=wx.EXPAND, border=4)
self.SetSizer(vbox)
self.play_timer = wx.Timer(self)
self.play_relval = 0
self.Bind(wx.EVT_TIMER, self.on_play_timer, self.play_timer)
self.monitor_timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.on_monitor_timer, self.monitor_timer)
self.Show()
if self.h5file is not None:
self.read_h5file()
def __init__(self, parent, state):
wx.Panel.__init__(self, parent)
self.state = state
self.img = None
self.map_img = None
self.redraw_timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.on_redraw_timer, self.redraw_timer)
self.Bind(wx.EVT_SET_FOCUS, self.on_focus)
self.redraw_timer.Start(200)
self.mouse_pos = None
self.mouse_down = None
self.click_pos = None
self.last_click_pos = None
if state.elevation:
self.ElevationMap = mp_elevation.ElevationModel()
self.mainSizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(self.mainSizer)
# start off with no follow checkbox
self.follow_checkbox = None
# display for lat/lon/elevation
self.position = wx.TextCtrl(self,
style=wx.TE_MULTILINE | wx.TE_READONLY)
textsize = tuple(
self.position.GetFullTextExtent('line 1\nline 2\n')[0:2])
self.position.SetMinSize(textsize)
self.mainSizer.AddSpacer(2)
self.mainSizer.Add(self.position,
flag=wx.LEFT | wx.BOTTOM | wx.GROW,
border=0)
self.position.Bind(wx.EVT_SET_FOCUS, self.on_focus)
# a place to put control flags
self.controls = wx.BoxSizer(wx.HORIZONTAL)
self.mainSizer.Add(self.controls,
0,
flag=wx.ALIGN_LEFT | wx.TOP | wx.GROW)
self.mainSizer.AddSpacer(2)
# a place to put information like image details
self.information = wx.BoxSizer(wx.HORIZONTAL)
self.mainSizer.Add(self.information,
0,
flag=wx.ALIGN_LEFT | wx.TOP | wx.GROW)
self.mainSizer.AddSpacer(2)
# panel for the main map image
self.imagePanel = mp_widgets.ImagePanel(
self, wx.EmptyImage(state.width, state.height))
self.mainSizer.Add(self.imagePanel, flag=wx.GROW, border=5)
self.imagePanel.Bind(wx.EVT_MOUSE_EVENTS, self.on_mouse)
self.imagePanel.Bind(wx.EVT_KEY_DOWN, self.on_key_down)
self.imagePanel.Bind(wx.EVT_MOUSEWHEEL, self.on_mouse_wheel)
# a function to convert from (lat,lon) to (px,py) on the map
self.pixmapper = functools.partial(self.pixel_coords)
self.last_view = None
self.redraw_map()
state.frame.Fit()
def ShowSensors(self):
"""
Display the sensors.
"""
sensors = self.getSensorsToDisplay(self.istart)
# Destroy previous widgets
for b in self.boxes: b.Destroy()
for t in self.texts: t.Destroy()
self.boxes = []
self.texts = []
# Main sizer
boxSizerMain = wx.BoxSizer(wx.VERTICAL)
# Grid sizer
nrows, ncols = 1, 3
vgap, hgap = 0, 0
gridSizer = wx.GridSizer(nrows, ncols, vgap, hgap)
# Create a box for each sensor
for index, sensor in sensors:
(name, value, unit) = self.port.sensor(index)
box = OBDStaticBox(self, wx.ID_ANY)
self.boxes.append(box)
boxSizer = wx.StaticBoxSizer(box, wx.VERTICAL)
# Text for sensor value
if type(value)==float:
value = str("%.2f"%round(value, 3))
t1 = wx.StaticText(parent=self, label=str(value), style=wx.ALIGN_CENTER)
t1.SetForegroundColour('WHITE')
font1 = wx.Font(32, wx.ROMAN, wx.NORMAL, wx.NORMAL, faceName="Monaco")
t1.SetFont(font1)
boxSizer.Add(t1, 0, wx.ALIGN_CENTER | wx.ALL, 20)
boxSizer.AddStretchSpacer()
self.texts.append(t1)
# Text for sensor name
t2 = wx.StaticText(parent=self, label=unit+"\n"+name, style=wx.ALIGN_CENTER)
t2.SetForegroundColour('WHITE')
font2 = wx.Font(13, wx.ROMAN, wx.NORMAL, wx.BOLD, faceName="Monaco")
t2.SetFont(font2)
boxSizer.Add(t2, 0, wx.ALIGN_CENTER | wx.ALL, 5)
self.texts.append(t2)
gridSizer.Add(boxSizer, 1, wx.EXPAND | wx.ALL)
# Add invisible boxes if necessary
nsensors = len(sensors)
for i in range(3-nsensors):
box = OBDStaticBox(self)
boxSizer = wx.StaticBoxSizer(box, wx.VERTICAL)
self.boxes.append(box)
box.Show(False)
gridSizer.Add(boxSizer, 1, wx.EXPAND | wx.ALL)
# Layout
boxSizerMain.Add(gridSizer, 1, wx.EXPAND | wx.ALL, 10)
self.SetSizer(boxSizerMain)
self.Refresh()
self.Layout()
# Timer for update
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.refresh, self.timer)
self.timer.Start(650)
def __init__( self, parent ):
wx.Frame.__init__ ( self, parent, id = wx.ID_ANY, title = u"Testu logs", pos = wx.DefaultPosition, size = wx.Size( 700,450 ), style = wx.DEFAULT_FRAME_STYLE|wx.TAB_TRAVERSAL )
self.SetSizeHints( wx.DefaultSize, wx.DefaultSize )
bSizer1 = wx.BoxSizer( wx.HORIZONTAL )
self.m_panel2 = wx.Panel( self, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.BORDER_SUNKEN|wx.TAB_TRAVERSAL )
self.m_panel2.SetMinSize( wx.Size( 150,-1 ) )
global x
x = np.linspace(0,50., num=100)
X,Y = np.meshgrid(x,x)
self.client = PlotCanvas(self)
#self.m_panel1 = wx.Panel( self, wx.ID_ANY, wx.DefaultPosition, wx.DefaultSize, wx.TAB_TRAVERSAL )
bSizer1.Add( self.client, 1, wx.EXPAND, 5 )
global k
k=0.
global Blit
Blit = True
##########TIMER
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.draw, self.timer)
bSizer2 = wx.BoxSizer( wx.VERTICAL )
bSizer2.Add( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_button1 = wx.Button( self.m_panel2, wx.ID_ANY, u"Variants A", wx.DefaultPosition, wx.DefaultSize, 0 )
bSizer2.Add( self.m_button1, 0, wx.ALL, 5 )
self.m_button2 = wx.Button( self.m_panel2, wx.ID_ANY, u"Variants B", wx.DefaultPosition, wx.DefaultSize, 0 )
bSizer2.Add( self.m_button2, 0, wx.ALL, 5 )
self.toggleBtn = wx.Button(self.m_panel2, wx.ID_ANY, "Start")
bSizer2.Add( self.toggleBtn, 0, wx.ALL, 5 )
bSizer2.Add( ( 0, 0), 1, wx.EXPAND, 5 )
self.m_panel2.SetSizer( bSizer2 )
self.m_panel2.Layout()
bSizer2.Fit( self.m_panel2 )
bSizer1.Add( self.m_panel2, 0, wx.EXPAND, 5 )
self.SetSizer( bSizer1 )
self.Layout()
self.Centre( wx.BOTH )
self.m_statusBar1 = self.CreateStatusBar( 1, wx.STB_SIZEGRIP|wx.BORDER_RAISED, wx.ID_ANY )
# Connect Events
self.Bind( wx.EVT_CLOSE, self.OnClose )
self.Bind( wx.EVT_IDLE, self.OnIdle )
self.m_button1.Bind( wx.EVT_BUTTON, self.OnVariantsA )
self.m_button2.Bind( wx.EVT_BUTTON, self.OnVariantsB )
self.toggleBtn.Bind(wx.EVT_BUTTON, self.onToggle)
########################
# define the function for drawing pointLabels
#self.client.SetPointLabelFunc(self.DrawPointLabel)
# Create mouse event for showing cursor coords in status bar
#self.client.canvas.Bind(wx.EVT_LEFT_DOWN, self.OnMouseLeftDown)
# Show closest point when enabled
#self.client.canvas.Bind(wx.EVT_MOTION, self.OnMotion)
self.resetDefaults()
self.Show(True)
def __init__(self, parent, id, DO_lines):
self.debug = True
(self.DO_lines_6251, self.DO_lines_6025) = DO_lines
wx.Frame.__init__(self,
None,
-1,
title='ATE Manual Control',
pos=(10, 10),
size=(600, 800))
panel = wx.Panel(self, -1)
#main label for the window
window_label = wx.StaticText(panel,
-1,
"ATE Manual Control Utility",
pos=(50, 10))
font = wx.Font(31, wx.DEFAULT, wx.NORMAL, wx.NORMAL)
window_label.SetFont(font)
#*****************************************************************
#********Analog input voltage controls****************************
#create labels for 6251 analog voltage display
voltage_labels = [
'VREF', '2V2', '1V8', 'Ibat', '15V', '2V2 ripple', '1V8 ripple',
'15V ripple', 'TPECG', 'ISRC', 'VREF ripple', 'VBAT', 'HV CAPS'
]
voltage_labels_x_pos = 20
voltage_labels_y_pos = 100
voltage_labels_spacing = 25
column_label_font = wx.Font(12, wx.DEFAULT, wx.NORMAL, wx.NORMAL)
voltage_display_font = wx.Font(10, wx.DEFAULT, wx.NORMAL, wx.NORMAL)
num_voltage_measurement_labels = 13
self.voltage_measurement_labels = []
for i in range(num_voltage_measurement_labels):
self.voltage_measurement_labels.append(
wx.StaticText(panel,
-1,
voltage_labels[i],
pos=(voltage_labels_x_pos, voltage_labels_y_pos +
(i * voltage_labels_spacing)),
size=(20, 70),
style=wx.ALIGN_RIGHT))
self.voltage_measurement_labels[i].SetFont(column_label_font)
#create the controls to place 6251 analog voltage measurements into
num_6251_displays = 13
voltage_measurements_6251_x_pos = 110
self.voltage_measurements_6251 = []
for i in range(num_6251_displays):
self.voltage_measurements_6251.append(
wx.TextCtrl(
panel,
-1,
"",
size=(67, 20),
pos=(voltage_measurements_6251_x_pos,
voltage_labels_y_pos + (i * voltage_labels_spacing))))
self.voltage_measurements_6251[i].SetFont(voltage_display_font)
self.voltage_measurements_6251[i].SetValue("%.4fV" % (1.2345))
label_6251 = wx.StaticText(panel,
-1,
' 6251',
pos=(voltage_measurements_6251_x_pos,
voltage_labels_y_pos - 25))
label_6251.SetFont(column_label_font)
#create labels for 6025 analog voltage display
voltage_labels_6025 = ['VREF', '2V2', '1V8', '15V', 'VBAT', 'Ibat']
voltage_labels_6025_x_pos = 260
self.voltage_measurement_labels_6025 = []
for i in range(len(voltage_labels_6025)):
self.voltage_measurement_labels_6025.append(
wx.StaticText(
panel,
-1,
voltage_labels_6025[i],
pos=(voltage_labels_6025_x_pos,
voltage_labels_y_pos + (i * voltage_labels_spacing))))
self.voltage_measurement_labels_6025[i].SetFont(column_label_font)
#create the controls to place 6025 analog voltage measurements into
num_6025_displays = 6
voltage_measurements_6025_x_pos = 190
self.voltage_measurements_6025 = []
for i in range(num_6025_displays):
self.voltage_measurements_6025.append(
wx.TextCtrl(
panel,
-1,
"",
size=(67, 20),
pos=(voltage_measurements_6025_x_pos,
voltage_labels_y_pos + (i * voltage_labels_spacing))))
self.voltage_measurements_6025[i].SetFont(voltage_display_font)
self.voltage_measurements_6025[i].SetValue("%.4fV" % (1.2345))
label_6025 = wx.StaticText(panel,
-1,
' 6025',
pos=(voltage_measurements_6025_x_pos,
voltage_labels_y_pos - 25))
label_6025.SetFont(column_label_font)
#create a timer for updating voltage displays
self.timer = wx.Timer(self, -1)
self.timer.Start(1000) # update clock digits every second (1000ms)
self.Bind(wx.EVT_TIMER, self.OnTimer)
#*****************************************************************
#*****************************************************************
#**********Digital Controls***************************************
DIO_6251_port_numbers = ["P0_0", "P0_1"]
DIO_portnums_6251 = []
DIO_6251_port_descriptions = ["short TZ", "BOL(off)/EOL(on)"]
DIO_portnames_6251 = []
self.DIO_buttons_6251 = []
digital_ports_6251_x_pos = 350
digital_ports_6251_y_pos = 710
digital_y_pos = 100
digital_y_spacing = 18
num_digital_controls_6251 = len(DIO_6251_port_numbers)
DIO_label_font = wx.Font(10, wx.DEFAULT, wx.NORMAL, wx.NORMAL)
DIO_description_font = wx.Font(10, wx.DEFAULT, wx.NORMAL, wx.NORMAL)
DIO_button_font = wx.Font(8, wx.DEFAULT, wx.NORMAL, wx.NORMAL)
DIO_button_size = (35, 18)
#labels for port numbers on 6251 DIO card
for i in range(num_digital_controls_6251):
DIO_portnums_6251.append(
wx.StaticText(
panel,
-1,
DIO_6251_port_numbers[i],
pos=(digital_ports_6251_x_pos,
digital_ports_6251_y_pos + (i * digital_y_spacing))))
DIO_portnums_6251[i].SetFont(DIO_label_font)
#buttons for controlling 6251 ports
for i in range(num_digital_controls_6251):
self.DIO_buttons_6251.append(
wx.Button(panel,
-1,
'OFF',
pos=(digital_ports_6251_x_pos + 40,
digital_ports_6251_y_pos +
(i * digital_y_spacing) - 2),
size=DIO_button_size))
self.DIO_buttons_6251[i].name = "6251_%d" % i
self.DIO_buttons_6251[i].SetFont(DIO_button_font)
self.DIO_buttons_6251[i].SetBackgroundColour(STANDARD)
self.Bind(wx.EVT_BUTTON, self.on_DIO_click,
self.DIO_buttons_6251[i])
#labels for 6251 port descriptions
for i in range(num_digital_controls_6251):
DIO_portnames_6251.append(
wx.StaticText(
panel,
-1,
DIO_6251_port_descriptions[i],
pos=(digital_ports_6251_x_pos + 80,
digital_ports_6251_y_pos + (i * digital_y_spacing))))
DIO_portnames_6251[i].SetFont(DIO_description_font)
#label 6251 column
label_6251_DO = wx.StaticText(panel,
-1,
' 6251 Digital Output',
pos=(digital_ports_6251_x_pos,
digital_ports_6251_y_pos - 25))
label_6251_DO.SetFont(column_label_font)
#variables for the 6025 digital ports
DIO_6025_port_numbers = [
"DIO_0", "DIO_1", "DIO_2", "DIO_3", "DIO_4", "DIO_5", "DIO_6",
"DIO_7", "PA_0", "PA_1", "PA_2", "PA_3", "PA_4", "PA_5", "PA_6",
"PA_7", "PB_0", "PB_1", "PB_2", "PB_3", "PB_4", "PB_5", "PB_6",
"PB_7", "PC_0", "PC_1", "PC_2", "PC_3", "PC_4", "PC_5", "PC_6",
"PC_7"
]
DIO_portnums_6025 = []
DIO_6025_port_descriptions = [
"shock load 1", "shock load 2", "shock load 3", "shock load 4",
"75ohm shock load", "", "", "HVcaps 10K load", "ECG SA-A0",
"ECG SA-A1", "ECG SB-A0", "ECG SB-A1", "ECG HVA-A0", "ECG HVA-A1",
"ECG HVB-A0", "ECG HVB-A1", "SMU_CH1-2V2", "SMU_CH2-1V8",
"SMU_CH3-15V", "GPIP0-1V8", "FDATA0-GND", "ADCIN-2V2", "", "",
"PicoscopeA-shock", "PicoscopeB-ECGDATA", "PicoscopeB-CEN",
"PicoscopeA-DATA0", "", "", "", ""
]
DIO_portnames_6025 = []
self.DIO_buttons_6025 = []
digital_ports_6025_x_pos = 350
num_digital_controls_6025 = len(DIO_6025_port_numbers)
DIO_portnums_6025 = []
#labels for port numbers on 6025 DIO card
for i in range(num_digital_controls_6025):
DIO_portnums_6025.append(
wx.StaticText(panel,
-1,
DIO_6025_port_numbers[i],
pos=(digital_ports_6025_x_pos,
digital_y_pos + (i * digital_y_spacing))))
DIO_portnums_6025[i].SetFont(DIO_label_font)
#buttons for controlling 6025 ports
for i in range(num_digital_controls_6025):
self.DIO_buttons_6025.append(
wx.Button(panel,
-1,
'OFF',
pos=(digital_ports_6025_x_pos + 40,
digital_y_pos + (i * digital_y_spacing) - 2),
size=DIO_button_size))
self.DIO_buttons_6025[i].name = "6025_%d" % i
self.DIO_buttons_6025[i].SetFont(DIO_button_font)
self.DIO_buttons_6025[i].SetBackgroundColour(STANDARD)
self.Bind(wx.EVT_BUTTON, self.on_DIO_click,
self.DIO_buttons_6025[i])
#labels for 6025 port descriptions
for i in range(len(DIO_6025_port_descriptions)):
DIO_portnames_6025.append(
wx.StaticText(panel,
-1,
DIO_6025_port_descriptions[i],
pos=(digital_ports_6025_x_pos + 80,
digital_y_pos + (i * digital_y_spacing))))
DIO_portnames_6025[i].SetFont(DIO_description_font)
#label 6025 column
label_6025_DO = wx.StaticText(panel,
-1,
' 6025 Digital Output',
pos=(digital_ports_6025_x_pos,
digital_y_pos - 25))
label_6025_DO.SetFont(column_label_font)
#*****************************************************************
#*****************************************************************
#***********Analog Output Controls********************************
AO_x_pos = 100
AO_y_pos = 450
#section label
label_AO = wx.StaticText(panel,
-1,
' 6251 Analog Output',
pos=(AO_x_pos, AO_y_pos))
label_AO.SetFont(column_label_font)
#radio buttons for selecting output type
output_types_list = ['Sinewave', 'ECG']
self.output_types = wx.RadioBox(panel, -1, "",
(AO_x_pos, AO_y_pos + 20),
wx.DefaultSize, output_types_list, 2,
wx.RA_SPECIFY_COLS)
self.Bind(wx.EVT_RADIOBOX, self.on_AO_change, self.output_types)
#numeric control for selecting sinewave amplitude
self.amplitude_label = wx.StaticText(panel,
-1,
'amplitude(Vpp)',
pos=(AO_x_pos - 20,
AO_y_pos + 76))
self.amplitude_label.SetFont(DIO_label_font)
self.amplitude_entry = wx.TextCtrl(panel,
-1,
'0.05',
pos=(AO_x_pos + 70, AO_y_pos + 75),
size=(50, 20),
style=wx.TE_PROCESS_ENTER)
self.Bind(wx.EVT_TEXT_ENTER, self.on_amplitude_entered,
self.amplitude_entry)
self.amplitude_spin = wx.SpinButton(panel,
-1,
pos=(AO_x_pos + 120,
AO_y_pos + 75))
self.Bind(wx.EVT_SPIN_UP, self.on_amplitude_spin_increase,
self.amplitude_spin)
self.Bind(wx.EVT_SPIN_DOWN, self.on_amplitude_spin_decrease,
self.amplitude_spin)
#numeric control for selecting sinewave frequency
self.frequency_label = wx.StaticText(panel,
-1,
'frequency(Hz)',
pos=(AO_x_pos - 20,
AO_y_pos + 101))
self.frequency_label.SetFont(DIO_label_font)
self.frequency_entry = wx.TextCtrl(panel,
-1,
'11.0',
pos=(AO_x_pos + 70, AO_y_pos + 100),
size=(50, 20),
style=wx.TE_PROCESS_ENTER)
self.Bind(wx.EVT_TEXT_ENTER, self.on_frequency_entered,
self.frequency_entry)
self.frequency_spin = wx.SpinButton(panel,
-1,
pos=(AO_x_pos + 120,
AO_y_pos + 100))
self.Bind(wx.EVT_SPIN_UP, self.on_frequency_spin_increase,
self.frequency_spin)
self.Bind(wx.EVT_SPIN_DOWN, self.on_frequency_spin_decrease,
self.frequency_spin)
#container for all controls related to sinewave output adjustment
self.sinewave_controls = [
self.amplitude_label, self.amplitude_entry, self.amplitude_spin,
self.frequency_label, self.frequency_entry, self.frequency_spin
]
#slider for selecting ECG beats-per-minute
self.ecg_bpm = 60
self.min_bpm = 40
self.max_bpm = 300
self.ecg_bpm_slider = wx.Slider(panel,
-1,
value=self.ecg_bpm,
minValue=self.min_bpm,
maxValue=self.max_bpm,
pos=(AO_x_pos - 50, AO_y_pos + 130),
size=(260, 50),
style=wx.SL_HORIZONTAL
| wx.SL_AUTOTICKS | wx.SL_LABELS)
self.ecg_bpm_slider.SetTickFreq(10, 1)
self.Bind(wx.EVT_SCROLL_THUMBRELEASE, self.on_bpm_slider_change,
self.ecg_bpm_slider)
#container for all controls related to ecg output
self.ecg_controls = [self.ecg_bpm_slider]
#turn ecg bpm slider off as default selection is sinewave output
for control in self.ecg_controls:
control.Hide()
#buttons for selecting which channel the selected signal is applied to
AO_button_y_pos = 640
self.AO_buttons_label = wx.StaticText(panel,
-1,
'Output Channel Enable',
pos=(AO_x_pos, AO_button_y_pos))
self.AO_buttons_label.SetFont(
wx.Font(10, wx.DEFAULT, wx.NORMAL, wx.NORMAL))
self.AO_CH0_button = wx.Button(panel,
-1,
'OFF',
pos=(AO_x_pos, AO_button_y_pos + 20),
size=(50, 20))
self.AO_CH0_button.SetBackgroundColour(STANDARD)
self.AO_CH0_button.name = 'CH0'
self.Bind(wx.EVT_BUTTON, self.on_AO_enable_click, self.AO_CH0_button)
self.AO_CH0_button_label = wx.StaticText(panel,
-1,
'CH_0',
pos=(AO_x_pos + 10,
AO_button_y_pos + 40))
self.AO_CH0_button_label.SetFont(
wx.Font(10, wx.DEFAULT, wx.NORMAL, wx.NORMAL))
self.AO_CH0_running = False
self.AO_CH1_button = wx.Button(panel,
-1,
'OFF',
pos=(AO_x_pos + 100,
AO_button_y_pos + 20),
size=(50, 20))
self.AO_CH1_button.SetBackgroundColour(STANDARD)
self.AO_CH1_button.name = 'CH1'
self.Bind(wx.EVT_BUTTON, self.on_AO_enable_click, self.AO_CH1_button)
self.AO_CH1_button_label = wx.StaticText(panel,
-1,
'CH_1',
pos=(AO_x_pos + 110,
AO_button_y_pos + 40))
self.AO_CH1_button_label.SetFont(
wx.Font(10, wx.DEFAULT, wx.NORMAL, wx.NORMAL))
self.AO_CH1_running = False
self.analog_output_thread_started = False
self.AO_buttons = [self.AO_CH0_button, self.AO_CH1_button]
def __init__(self):
#--------------
screen = wx.ScreenDC()
# Screen size.
ws, hs = screen.GetSize()
#--------------
# Return bitmaps folder.
# self.bitmaps_dir = wx.GetApp().GetBitmapsDir()
# Load a background bitmap.
bitmap = wx.Bitmap(r"icons\grand-canyon.jpg", type=wx.BITMAP_TYPE_JPEG)
# Determine size of bitmap.
wi, hi = bitmap.GetWidth(), bitmap.GetHeight()
print("\n... Bitmap size : %sx%s px" % (wi, hi))
x = int((ws - wi) / 2)
y = int((hs - hi) / 2)
#--------------
super(MySplash, self).__init__(
bitmap=bitmap,
splashStyle=wx.adv.SPLASH_CENTRE_ON_SCREEN | wx.adv.SPLASH_TIMEOUT,
milliseconds=8000,
parent=None,
id=-1,
pos=(x, y),
size=(wi, hi),
style=wx.STAY_ON_TOP | wx.BORDER_NONE)
#------------
self.SetBackgroundStyle(wx.BG_STYLE_CUSTOM)
self.count = 0
wx.Sleep(1)
#------------
# Simplified init method.
self.CreateCtrls()
self.BindEvents()
#------------
# Create a timer for my gauge.
self.timer = wx.Timer(self)
# Gauge speed. Simulate long startup time.
self.timer.Start(90)
self.Bind(wx.EVT_TIMER, self.TimerHandler, self.timer)
#------------
print("\n... Display the splashScreen")
#--------------
wx.BeginBusyCursor()
def __init__(self, parent, log):
self.log = log
wx.Panel.__init__(self, parent, -1,
style=wx.TAB_TRAVERSAL|wx.CLIP_CHILDREN)
# Create some controls
try:
backend = "" # let MediaCtrl choose default backend
#backend=wx.media.MEDIABACKEND_DIRECTSHOW
#backend=wx.media.MEDIABACKEND_WMP10
self.mc = wx.media.MediaCtrl()
ok = self.mc.Create(self, style=wx.SIMPLE_BORDER,
szBackend=backend)
if not ok:
raise NotImplementedError
except NotImplementedError:
self.Destroy()
raise
# the following event is not sent with the Windows default backend
# MEDIABACKEND_DIRECTSHOW
# choose above e.g. MEDIABACKEND_WMP10 if this is a problem for you
self.Bind(wx.media.EVT_MEDIA_LOADED, self.OnMediaLoaded)
btn1 = wx.Button(self, -1, "Load File")
self.Bind(wx.EVT_BUTTON, self.OnLoadFile, btn1)
btn2 = wx.Button(self, -1, "Play")
self.Bind(wx.EVT_BUTTON, self.OnPlay, btn2)
self.playBtn = btn2
btn3 = wx.Button(self, -1, "Pause")
self.Bind(wx.EVT_BUTTON, self.OnPause, btn3)
btn4 = wx.Button(self, -1, "Stop")
self.Bind(wx.EVT_BUTTON, self.OnStop, btn4)
slider = wx.Slider(self, -1, 0, 0, 10)
self.slider = slider
slider.SetMinSize((150, -1))
self.Bind(wx.EVT_SLIDER, self.OnSeek, slider)
self.st_size = StaticText(self, -1, size=(100,-1))
self.st_len = StaticText(self, -1, size=(100,-1))
self.st_pos = StaticText(self, -1, size=(100,-1))
# setup the layout
sizer = wx.GridBagSizer(5,5)
sizer.Add(self.mc, (1,1), span=(5,1))#, flag=wx.EXPAND)
sizer.Add(btn1, (1,3))
sizer.Add(btn2, (2,3))
sizer.Add(btn3, (3,3))
sizer.Add(btn4, (4,3))
sizer.Add(slider, (6,1), flag=wx.EXPAND)
sizer.Add(self.st_size, (1, 5))
sizer.Add(self.st_len, (2, 5))
sizer.Add(self.st_pos, (3, 5))
self.SetSizer(sizer)
#self.DoLoadFile(os.path.abspath("data/testmovie.mpg"))
wx.CallAfter(self.DoLoadFile, os.path.abspath("data/testmovie.mpg"))
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnTimer)
self.timer.Start(100)
def start(self):
timer = wx.Timer(self, -1)
self.notify()
self.Bind(wx.EVT_TIMER, self.main, timer)
timer.Start(self.interval * 60000)
self.MainLoop()
def setupTimers(self):
self.runTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.runTick)
def __init__(self, gui):
"""Set up the relax controller frame.
@param gui: The GUI object.
@type gui: wx.Frame instance
"""
# Store the args.
self.gui = gui
# Initialise the base class.
super(Controller, self).__init__(self.gui,
-1,
style=wx.DEFAULT_FRAME_STYLE)
# Some default values.
self.size_x = 800
self.size_y = 700
self.border = 5
self.spacer = 10
# Set up the frame.
sizer = self.setup_frame()
# Add the relax logo.
self.add_relax_logo(sizer)
# Spacing.
sizer.AddSpacer(20)
# Add the current analysis info.
self.name = self.add_text(self.main_panel, sizer,
"Current GUI analysis:")
# Add the current data pipe info.
self.cdp = self.add_text(self.main_panel, sizer, "Current data pipe:")
# Create the relaxation curve-fitting specific panel.
self.create_rx(sizer)
# Create the model-free specific panel.
self.create_mf(sizer)
# Add the main execution gauge.
self.main_gauge = self.add_gauge(
self.main_panel,
sizer,
"Execution progress:",
tooltip=
"This gauge will pulse while relax is executing an auto-analysis (when the execution lock is turned on) and will be set to 100% once the analysis is complete."
)
# Initialise a queue for log messages.
self.log_queue = Queue()
# Add the log panel.
self.log_panel = LogCtrl(self.main_panel,
self,
log_queue=self.log_queue,
id=-1)
sizer.Add(self.log_panel, 1, wx.EXPAND | wx.ALL, 0)
# IO redirection for STDOUT (with splitting if logging or teeing modes are set).
out = Redirect_text(self.log_panel,
self.log_queue,
orig_io=sys.stdout,
stream=0)
if sys.stdout == sys.__stdout__ or status.relax_mode in [
'test suite', 'system tests', 'unit tests', 'GUI tests'
]:
sys.stdout = out
else:
split_stdout = SplitIO()
split_stdout.split(sys.stdout, out)
sys.stdout = split_stdout
# IO redirection for STDERR (with splitting if logging or teeing modes are set).
err = Redirect_text(self.log_panel,
self.log_queue,
orig_io=sys.stderr,
stream=1)
if sys.stderr == sys.__stderr__ or status.relax_mode in [
'test suite', 'system tests', 'unit tests', 'GUI tests'
]:
sys.stderr = err
else:
split_stderr = SplitIO()
split_stderr.split(sys.stderr, err)
sys.stderr = split_stderr
# Initial update of the controller.
self.update_controller()
# Create a timer for updating the controller elements.
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.handler_timer, self.timer)
# The relax intro printout, to mimic the prompt/script interface.
if not status.test_mode:
info = Info_box()
sys.stdout.write(info.intro_text())
sys.stdout.write("\n")
sys.stdout.flush()
# Set the focus on the log control.
self.log_panel.SetFocus()
# Register functions with the observer objects.
status.observers.pipe_alteration.register(
'controller',
self.update_controller,
method_name='update_controller')
status.observers.auto_analyses.register(
'controller',
self.update_controller,
method_name='update_controller')
status.observers.gui_analysis.register('controller',
self.update_controller,
method_name='update_controller')
status.observers.exec_lock.register('controller',
self.update_gauge,
method_name='update_gauge')
def __init__(self, parent):
super(InteractiveFrame, self).__init__(parent)
self._timer = wx.Timer(self)
self.Bind(wx.EVT_RIGHT_DOWN, self.on_right_down)
self.Bind(wx.EVT_LEFT_DOWN, self.on_left_down)
self.Bind(wx.EVT_TIMER, self.on_timer, self._timer)
def OnInit(self):
self.frame = wx.Frame(
None, -1,
self.action_name + ' - ' + self.action_type.name + ' - GUI Client')
self.sz = wx.BoxSizer(wx.VERTICAL)
tmp_goal = self.action_type.goal()
self.goal = wx.TextCtrl(self.frame, -1, style=wx.TE_MULTILINE)
self.goal.SetValue(to_yaml(tmp_goal))
self.goal_st_bx = wx.StaticBox(self.frame, -1, "Goal")
self.goal_st = wx.StaticBoxSizer(self.goal_st_bx, wx.VERTICAL)
self.goal_st.Add(self.goal, 1, wx.EXPAND)
self.feedback = wx.TextCtrl(self.frame,
-1,
style=(wx.TE_MULTILINE | wx.TE_READONLY))
self.feedback_st_bx = wx.StaticBox(self.frame, -1, "Feedback")
self.feedback_st = wx.StaticBoxSizer(self.feedback_st_bx, wx.VERTICAL)
self.feedback_st.Add(self.feedback, 1, wx.EXPAND)
self.result = wx.TextCtrl(self.frame,
-1,
style=(wx.TE_MULTILINE | wx.TE_READONLY))
self.result_st_bx = wx.StaticBox(self.frame, -1, "Result")
self.result_st = wx.StaticBoxSizer(self.result_st_bx, wx.VERTICAL)
self.result_st.Add(self.result, 1, wx.EXPAND)
self.send_goal = wx.Button(self.frame, -1, label="SEND GOAL")
self.send_goal.Bind(wx.EVT_BUTTON, self.on_goal)
self.send_goal.Disable()
self.cancel_goal = wx.Button(self.frame, -1, label="CANCEL GOAL")
self.cancel_goal.Bind(wx.EVT_BUTTON, self.on_cancel)
self.cancel_goal.Disable()
self.status_bg = wx.Panel(self.frame, -1)
self.status_bg.SetBackgroundColour(wx.Colour(200, 0, 0))
self.status = wx.StaticText(self.status_bg, -1, label="No Goal")
self.server_status_bg = wx.Panel(self.frame, -1)
self.server_status_bg.SetBackgroundColour(wx.Colour(200, 0, 0))
self.server_status = wx.StaticText(self.server_status_bg,
-1,
label="Disconnected from server.")
self.sz.Add(self.goal_st, 1, wx.EXPAND)
self.sz.Add(self.feedback_st, 1, wx.EXPAND)
self.sz.Add(self.result_st, 1, wx.EXPAND)
self.sz.Add(self.send_goal, 0, wx.EXPAND)
self.sz.Add(self.cancel_goal, 0, wx.EXPAND)
self.sz.Add(self.status_bg, 0, wx.EXPAND)
self.sz.Add(self.server_status_bg, 0, wx.EXPAND)
self.frame.SetSizer(self.sz)
self.server_check_timer = wx.Timer(self.frame)
self.frame.Bind(wx.EVT_TIMER, self.server_check,
self.server_check_timer)
self.server_check_timer.Start(1000)
self.sz.Layout()
self.frame.Show()
return True
def __init__(self):
def makeSP(name, labels, statictexts=None):
panel = wx.Panel(self.side_panel, -1)
box = wx.StaticBox(panel, -1, name)
sizer = wx.StaticBoxSizer(box, wx.VERTICAL)
for name, min_value, value, max_value in labels:
sp = SpinPanel(panel, name, min_value, value, max_value,
self.OnSpinback)
sizer.Add(sp, 0, wx.EXPAND)
if statictexts:
for name, text in statictexts:
st = wx.StaticText(panel, -1, text)
spin_panels[name] = st # Supposed to be a SpinPanel....
sizer.Add(st, 0, wx.EXPAND)
panel.SetSizer(sizer)
return panel
wx.Frame.__init__(self, None, title="Roses in wxPython")
self.rose_panel = RosePanel(self)
self.side_panel = wx.Panel(self)
# The cmd panel is four buttons whose names and foreground colors
# change. Plop them in a StaticBox like the SpinPanels. Use
# a 2x2 grid, but StaticBoxSizer can't handle that. Therefore,
# create a sub panel, layout the buttons there, then give that to
# a higher panel that has the static box stuff.
self.cmd_panel = wx.Panel(self.side_panel, -1)
self.sub_panel = wx.Panel(self.cmd_panel, -1)
sizer = wx.GridSizer(rows=2, cols=2)
global ctrl_buttons
border = 'wxMac' in wx.PlatformInfo and 3 or 1
for name, handler in (('Go', self.OnGoStop), ('Redraw', self.OnRedraw),
('Backward', self.OnBackward), ('Forward',
self.OnForward)):
button = wx.Button(self.sub_panel, -1, name)
button.SetForegroundColour(self.labelColours[name])
ctrl_buttons[name] = button
button.Bind(wx.EVT_BUTTON, handler)
sizer.Add(button, 0, wx.EXPAND | wx.ALL, border)
self.sub_panel.SetSizer(sizer)
# Set up cmd_panel with StaticBox stuff
box = wx.StaticBox(self.cmd_panel, -1, 'Command')
sizer = wx.StaticBoxSizer(box, wx.VERTICAL)
sizer.Add(self.sub_panel)
self.cmd_panel.SetSizer(sizer)
# Now make the rest of the control panels...
# The order of creation of SpinCtrls and Buttons is the order that
# the tab key will step through, so the order of panel creation is
# important.
# In the SpinPanel data (name, min, value, max), value will be
# overridden by clroses.py defaults.
self.coe_panel = makeSP('Coefficient', (('Style', 0, 100, 3600),
('Sincr', -3600, -1, 3600),
('Petal', 0, 2, 3600),
('Pincr', -3600, 1, 3600)))
self.vec_panel = makeSP(
'Vector', (('Vectors', 1, 399, 3600), ('Minimum', 1, 1, 3600),
('Maximum', 1, 3600, 3600), ('Skip first', 0, 0, 3600),
('Draw only', 1, 3600, 3600)),
(('Takes', 'Takes 0000 vectors'), ))
self.tim_panel = makeSP('Timing', (('Vec/tick', 1, 20, 3600),
('msec/tick', 1, 50, 1000),
('Delay', 1, 2000, 9999)))
self.opt_panel = OptionsPanel(self.side_panel, self.rose_panel)
# put them all on in a sizer attached to the side_panel
panelSizer = wx.BoxSizer(wx.VERTICAL)
panelSizer.Add(self.cmd_panel, 0,
wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
panelSizer.Add(self.coe_panel, 0,
wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
panelSizer.Add(self.vec_panel, 0,
wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
panelSizer.Add(self.tim_panel, 0,
wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
panelSizer.Add(self.opt_panel, 0,
wx.EXPAND | wx.TOP | wx.LEFT | wx.RIGHT, 5)
self.side_panel.SetSizer(panelSizer)
# and now arrange the two main panels in another sizer for the frame
mainSizer = wx.BoxSizer(wx.HORIZONTAL)
mainSizer.Add(self.rose_panel, 1, wx.EXPAND)
mainSizer.Add(self.side_panel, 0, wx.EXPAND)
self.SetSizer(mainSizer)
# bind event handlers
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnTimer, self.timer)
# Determine appropriate image size.
# At this point, the rose_panel and side_panel will both report
# size (20, 20). After mainSizer.Fit(self) they will report the
# same, but the Frame size, self.GetSize(), will report the desired
# side panel dimensions plus an extra 20 on the width. That lets
# us determine the frame size that will display the side panel and
# a square space for the diagram. Only after Show() will the two
# panels report the accurate sizes.
mainSizer.Fit(self)
rw, rh = self.rose_panel.GetSize()
sw, sh = self.side_panel.GetSize()
fw, fh = self.GetSize()
h = max(600, fh) # Change 600 to desired minimum size
w = h + fw - rw
if verbose:
print 'rose panel size', (rw, rh)
print 'side panel size', (sw, sh)
print ' frame size', (fw, fh)
print 'Want size', (w, h)
self.SetSize((w, h))
self.SupplyControlValues() # Ask clroses to tell us all the defaults
self.Show()
def __init__(self, title='', video=''):
wx.Frame.__init__(self,
None,
-1,
title=title or 'wxVLC',
pos=wx.DefaultPosition,
size=(550, 500))
self.video = video
# Menu Bar
# File Menu
self.frame_menubar = wx.MenuBar()
self.file_menu = wx.Menu()
self.file_menu.Append(1, "&Open...", "Open from file...")
self.file_menu.AppendSeparator()
self.file_menu.Append(2, "&Close", "Quit")
self.Bind(wx.EVT_MENU, self.OnOpen, id=1)
self.Bind(wx.EVT_MENU, self.OnExit, id=2)
self.frame_menubar.Append(self.file_menu, "File")
self.SetMenuBar(self.frame_menubar)
# Panels
# The first panel holds the video and it's all black
self.videopanel = wx.Panel(self, -1)
self.videopanel.SetBackgroundColour(wx.BLACK)
# The second panel holds controls
ctrlpanel = wx.Panel(self, -1)
self.timeslider = wx.Slider(ctrlpanel, -1, 0, 0, 1000)
self.timeslider.SetRange(0, 1000)
self.pause = wx.Button(ctrlpanel, label="Pause")
self.pause.Disable()
self.play = wx.Button(ctrlpanel, label="Play")
self.stop = wx.Button(ctrlpanel, label="Stop")
self.stop.Disable()
self.mute = wx.Button(ctrlpanel, label="Mute")
self.volslider = wx.Slider(ctrlpanel, -1, 0, 0, 100, size=(100, -1))
# Bind controls to events
self.Bind(wx.EVT_BUTTON, self.OnPlay, self.play)
self.Bind(wx.EVT_BUTTON, self.OnPause, self.pause)
self.Bind(wx.EVT_BUTTON, self.OnStop, self.stop)
self.Bind(wx.EVT_BUTTON, self.OnMute, self.mute)
self.Bind(wx.EVT_SLIDER, self.OnVolume, self.volslider)
# Give a pretty layout to the controls
ctrlbox = wx.BoxSizer(wx.VERTICAL)
box1 = wx.BoxSizer(wx.HORIZONTAL)
box2 = wx.BoxSizer(wx.HORIZONTAL)
# box1 contains the timeslider
box1.Add(self.timeslider, 1)
# box2 contains some buttons and the volume controls
box2.Add(self.play, flag=wx.RIGHT, border=5)
box2.Add(self.pause)
box2.Add(self.stop)
box2.Add((-1, -1), 1)
box2.Add(self.mute)
box2.Add(self.volslider, flag=wx.TOP | wx.LEFT, border=5)
# Merge box1 and box2 to the ctrlsizer
ctrlbox.Add(box1, flag=wx.EXPAND | wx.BOTTOM, border=10)
ctrlbox.Add(box2, 1, wx.EXPAND)
ctrlpanel.SetSizer(ctrlbox)
# Put everything togheter
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(self.videopanel, 1, flag=wx.EXPAND)
sizer.Add(ctrlpanel, flag=wx.EXPAND | wx.BOTTOM | wx.TOP, border=10)
self.SetSizer(sizer)
self.SetMinSize((350, 300))
# finally create the timer, which updates the timeslider
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnTimer, self.timer)
# VLC player controls
self.Instance = vlc.Instance()
self.player = self.Instance.media_player_new()
def __init__(self):
self.count=1
wx.Frame.__init__(self, None, wx.ID_ANY, title="CPU Usage Monitor", size=(1280, 720))
# Matplotlib Figure
self.fig = Figure((16, 9), 80)
# bind the Figure to the backend specific canvas
self.canvas = FigureCanvas(self, wx.ID_ANY, self.fig)
# add a subplot
self.ax1 = self.fig.add_subplot(411)
self.ax2 = self.fig.add_subplot(412)
self.ax3 = self.fig.add_subplot(413)
self.ax4 = self.fig.add_subplot(414)
# limit the X and Y axes dimensions
self.ax1.set_ylim([-0.05, 1.2])
self.ax1.set_xlim([0, POINTS])
self.ax2.set_ylim([-0.05, 1.2])
self.ax2.set_xlim([0, POINTS])
self.ax3.set_ylim([-0.05, 1.2])
self.ax3.set_xlim([0, POINTS])
self.ax4.set_ylim([-0.05, 1.2])
self.ax4.set_xlim([0, POINTS])
self.ax1.set_autoscale_on(False)
self.ax1.set_xticks([])
self.ax2.set_autoscale_on(False)
self.ax2.set_xticks([])
self.ax3.set_autoscale_on(False)
self.ax3.set_xticks([])
self.ax4.set_autoscale_on(False)
self.ax4.set_xticks([])
# we want a tick every 10 point on Y (101 is to have 10
self.ax1.set_yticks(range(0, 2, 10))
self.ax2.set_yticks(range(0, 2, 10))
self.ax3.set_yticks(range(0, 2, 10))
self.ax4.set_yticks(range(0, 2, 10))
# disable autoscale, since we don't want the Axes to ad
# draw a grid (it will be only for Y)
self.ax1.grid(True)
self.ax2.grid(True)
self.ax3.grid(True)
self.ax4.grid(True)
# generates first "empty" plots
self.s1e = [None] * POINTS
self.s1s = [None] * POINTS
self.s1w = [None] * POINTS
self.s2e = [None] * POINTS
self.s2s = [None] * POINTS
self.s2w = [None] * POINTS
self.s3e = [None] * POINTS
self.s3s = [None] * POINTS
self.s3w = [None] * POINTS
self.s4e = [None] * POINTS
self.s4s = [None] * POINTS
self.s4w = [None] * POINTS
self.s1_e,=self.ax1.plot(range(POINTS),self.s1e,label='ECMP',linewidth=3)
self.s1_s,=self.ax1.plot(range(POINTS),self.s1s,label='STAT',linewidth=3)
self.s1_w,=self.ax1.plot(range(POINTS),self.s1w,label='LBAS',linewidth=3)
self.s2_e,=self.ax2.plot(range(POINTS),self.s2e,label='ECMP %',linewidth=3)
self.s2_s,=self.ax2.plot(range(POINTS),self.s2s,label='STAT %',linewidth=3)
self.s2_w,=self.ax2.plot(range(POINTS),self.s2w,label='WEIG %',linewidth=3)
self.s3_e,=self.ax3.plot(range(POINTS),self.s3e,label='ECMP %',linewidth=3)
self.s3_s,=self.ax3.plot(range(POINTS),self.s3s,label='STAT %',linewidth=3)
self.s3_w,=self.ax3.plot(range(POINTS),self.s3w,label='WEIG %',linewidth=3)
self.s4_e,=self.ax4.plot(range(POINTS),self.s4e,label='ECMP %',linewidth=3)
self.s4_s,=self.ax4.plot(range(POINTS),self.s4s,label='STAT %',linewidth=3)
self.s4_w,=self.ax4.plot(range(POINTS),self.s4w,label='WEIG %',linewidth=3)
# add the legend
self.ax1.legend(loc='upper center',
bbox_to_anchor=(0.5,1.5),
ncol=4,
prop=font_manager.FontProperties(size=10))
# force a draw on the canvas()
# trick to show the grid and the legend
self.canvas.draw()
# save the clean background - everything but the line
# is drawn and saved in the pixel buffer background
self.bg1 = self.canvas.copy_from_bbox(self.ax1.bbox)
self.bg2 = self.canvas.copy_from_bbox(self.ax2.bbox)
self.bg3 = self.canvas.copy_from_bbox(self.ax3.bbox)
self.bg4 = self.canvas.copy_from_bbox(self.ax4.bbox)
# bind events coming from timer with id = TIMER_ID
# to the onTimer callback function
self.timer = wx.Timer(self)
self.timer.Start(500)
self.Bind(wx.EVT_TIMER, self.onTimer,self.timer)
def __init__(self,
parent,
fitID=None,
shipFittingInfo=("Test", "TestTrait", "cnc's avatar", 0, 0,
None),
shipID=None,
itemData=None,
graphicID=None,
id=wx.ID_ANY,
pos=wx.DefaultPosition,
size=(0, 40),
style=0):
# =====================================================================
# animCount should be 10 if we enable animation in Preferences
# =====================================================================
self.animCount = 0
self.selectedDelta = 0
SFItem.SFBrowserItem.__init__(self, parent, size=size)
self.mainFrame = gui.mainFrame.MainFrame.getInstance()
self._itemData = itemData
self.fitID = fitID
self.shipID = shipID
self.shipBrowser = self.Parent.Parent
self.shipBmp = None
self.deleted = False
if shipID:
self.shipBmp = BitmapLoader.getBitmap(str(graphicID), "renders")
if not self.shipBmp:
self.shipBmp = BitmapLoader.getBitmap("ship_no_image_big", "gui")
self.shipFittingInfo = shipFittingInfo
self.shipName, self.shipTrait, self.fitName, self.fitBooster, self.timestamp, self.notes = shipFittingInfo
if config.debug:
self.fitName = '({}) {}'.format(self.fitID, self.fitName)
self.shipTrait = re.sub("<.*?>", " ", self.shipTrait)
# see GH issue #62
# Disabling this due to change in gang boosts Nov 2016
# if self.fitBooster is None: self.fitBooster = False
self.fitBooster = False
self.boosterBmp = BitmapLoader.getBitmap("fleet_fc_small", "gui")
self.copyBmp = BitmapLoader.getBitmap("fit_add_small", "gui")
self.renameBmp = BitmapLoader.getBitmap("fit_rename_small", "gui")
self.deleteBmp = BitmapLoader.getBitmap("fit_delete_small", "gui")
self.acceptBmp = BitmapLoader.getBitmap("faccept_small", "gui")
self.shipEffBk = BitmapLoader.getBitmap("fshipbk_big", "gui")
img = self.shipEffBk.ConvertToImage()
img = img.Mirror(False)
self.shipEffBkMirrored = wx.Bitmap(img)
self.dragTLFBmp = None
self.bkBitmap = None
self.__setToolTip()
self.padding = 4
self.editWidth = 150
self.dragging = False
self.dragged = False
self.dragMotionTrail = 5
self.dragMotionTrigger = self.dragMotionTrail
self.dragWindow = None
self.fontBig = wx.Font(fonts.BIG, wx.SWISS, wx.NORMAL, wx.BOLD)
self.fontNormal = wx.Font(fonts.NORMAL, wx.SWISS, wx.NORMAL, wx.NORMAL)
self.fontSmall = wx.Font(fonts.SMALL, wx.SWISS, wx.NORMAL, wx.NORMAL)
self.SetDraggable()
self.boosterBtn = self.toolbar.AddButton(self.boosterBmp,
"Booster",
show=self.fitBooster)
self.toolbar.AddButton(self.copyBmp, "Copy", self.copyBtnCB)
self.renameBtn = self.toolbar.AddButton(self.renameBmp, "Rename",
self.renameBtnCB)
self.toolbar.AddButton(self.deleteBmp, "Delete", self.deleteBtnCB)
self.tcFitName = wx.TextCtrl(self, wx.ID_ANY, "%s" % self.fitName,
wx.DefaultPosition, (self.editWidth, -1),
wx.TE_PROCESS_ENTER)
if self.shipBrowser.fitIDMustEditName != self.fitID:
self.tcFitName.Show(False)
else:
self.tcFitName.SetFocus()
self.tcFitName.SelectAll()
self.shipBrowser.fitIDMustEditName = -1
self.renameBtn.SetBitmap(self.acceptBmp)
self.tcFitName.Bind(wx.EVT_TEXT_ENTER, self.renameFit)
self.tcFitName.Bind(wx.EVT_KILL_FOCUS, self.editLostFocus)
self.tcFitName.Bind(wx.EVT_KEY_DOWN, self.editCheckEsc)
self.Bind(wx.EVT_MOUSE_CAPTURE_LOST, self.OnMouseCaptureLost)
self.animTimerId = wx.NewId()
self.animTimer = wx.Timer(self, self.animTimerId)
self.animStep = 0
self.animPeriod = 10
self.animDuration = 100
self.maxDelta = 48
self.Bind(wx.EVT_TIMER, self.OnTimer)
# =====================================================================
# DISABLED - it will be added as an option in PREFERENCES
# if self.shipBrowser.GetActiveStage() != 4 and self.shipBrowser.GetLastStage() !=3:
# self.animTimer.Start(self.animPeriod)
# else:
# self.animCount = 0
# =====================================================================
"""
# Remove this bit as the time stuff is non-functional (works... but not exactly sure what it's meant to do)
self.selTimerID = wx.NewId()
self.selTimer = wx.Timer(self, self.selTimerID)
self.selTimer.Start(100)
"""
self.Bind(wx.EVT_RIGHT_UP, self.OnContextMenu)
self.Bind(wx.EVT_MIDDLE_UP, self.OpenNewTab)
def flash_status_message(self, msg, flash_len_ms=1500):
self.statusbar.SetStatusText(msg)
self.timeroff = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.on_flash_status_off, self.timeroff)
self.timeroff.Start(flash_len_ms, oneShot=True)
def __init__(self):
global GlobalSerialPort
global GlobalFacilityText
wx.Frame.__init__(self, None, wx.ID_ANY, 'CapCom ', style = wx.DEFAULT_FRAME_STYLE ^ wx.RESIZE_BORDER,
size=(CalcFormLength(), CalcFormHeight()))# + SWVer, )
panel = wx.Panel(self, -1)
wx.Frame.CenterOnScreen(self)
BackGroundColour = (233, 228, 214)
panel.SetBackgroundColour(BackGroundColour)
self.Bind (wx.EVT_IDLE, self.OnIdle)
self.WritePanel = WriteWindow(self)
self.ReadPanel = ReadWindow(self)
self.SettingsPanel = SettingsWindow(self)
font16 = wx.Font(16, wx.FONTFAMILY_SWISS, wx.NORMAL, wx.NORMAL)
font12 = wx.Font(12, wx.FONTFAMILY_SWISS, wx.NORMAL, wx.NORMAL)
font10 = wx.Font(10, wx.FONTFAMILY_SWISS, wx.NORMAL, wx.NORMAL)
# Main Page
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.OnTimer, self.timer)
self.timer.Start(5000)
self.StatusBar = wx.StatusBar(self, -1)
self.StatusBar.SetFieldsCount(4)
self.MainLogoText = wx.StaticText(panel, -1, u'cCap', pos = (180, 100), size = (120, 30))
self.MainLogoText.SetFont(wx.Font(72, wx.FONTFAMILY_SWISS, wx.ITALIC, wx.NORMAL))
self.ReadPageGotoButton = wx.Button(panel, -1, label = 'Read Cap', pos = (0, 350), size = (150, 50))
self.ReadPageGotoButton.SetFont(font16)
self.Bind(wx.EVT_BUTTON, self.on_ReadPageGotoButton, self.ReadPageGotoButton)
self.WritePageGotoButton = wx.Button(panel, -1, label = 'Write Cap', pos = (150, 350), size = (150, 50))
self.WritePageGotoButton.SetFont(font16)
self.Bind(wx.EVT_BUTTON, self.on_WritePageGotoButton, self.WritePageGotoButton)
self.SettingsPageGotoButton = wx.Button(panel, -1, label = 'Settings', pos = (300, 350), size = (150, 50))
self.SettingsPageGotoButton.SetFont(font16)
self.Bind(wx.EVT_BUTTON, self.on_SettingsPageGotoButton, self.SettingsPageGotoButton)
self.ExitButton = wx.Button(panel, -1, label = 'Exit', pos = (450, 350), size = (150, 50))
self.ExitButton.SetFont(font16)
self.Bind(wx.EVT_BUTTON, self.on_ExitButton, self.ExitButton)
# end of GUI initialization
# load settings
if os.path.exists('CapCom.INI'):
f = open('CapCom.INI', 'r')
line = f.readline()
self.PreviousComPort = line.rstrip()
line = f.readline()
GlobalFacilityText = line.rstrip()
# ReadWindow.ReportDestination.SetValue(line.rstrip())
# line = f.readline()
# line = line.rstrip()
# if line == 'PDF' or line == 'Excel' or line == 'RawData':
# self.ReportFormatChoice.SetStringSelection(line)
# else:
# self.ReportFormatChoice.SetStringSelection('Text')
# line = f.readline()
# line = line.rstrip()
f.close()
else:
self.ReadPanel.ReportDestination.SetValue(os.getcwd())
self.ReadPanel.ReportFormatChoice.SetStringSelection('PDF')
BaseStationList = FindBaseStation()
GlobalSerialPort = BaseStationList[0]
SerialPortName = str(BaseStationList[0])
if SerialPortName.find('No') == 0:
dlg = wx.MessageDialog(None, GlobalSerialPort, 'Error', wx.OK)
DialogReturn = dlg.ShowModal()
self.Close(True)
else:
if platform.system() == "Windows":
SerialPortName = 'COM' + SerialPortName
self.StatusBar.SetStatusText(SerialPortName,0)
self.ReadPanel.StatusBar.SetStatusText(SerialPortName,0)
self.WritePanel.StatusBar.SetStatusText(SerialPortName,0)
self.SettingsPanel.StatusBar.SetStatusText(SerialPortName,0)
BaseStationTitle = BaseStationList[1][4:].strip()
BaseStationTitle = BaseStationTitle.replace(':', ' ' )
self.StatusBar.SetStatusText(BaseStationTitle,1)
self.ReadPanel.StatusBar.SetStatusText(BaseStationTitle,1)
self.WritePanel.StatusBar.SetStatusText(BaseStationTitle,1)
self.SettingsPanel.StatusBar.SetStatusText(BaseStationTitle,1)
self.OnTimer(wx.EVT_TIMER)
def __init__(self, parent, debug = False):
wx.Frame.__init__(self, parent, -1, "ArbotiX Controller GUI", style = wx.DEFAULT_FRAME_STYLE & ~ (wx.RESIZE_BORDER | wx.MAXIMIZE_BOX))
sizer = wx.GridBagSizer(5,5)
# Move Base
drive = wx.StaticBox(self, -1, 'Move Base')
drive.SetFont(wx.Font(10, wx.DEFAULT, wx.NORMAL, wx.BOLD))
driveBox = wx.StaticBoxSizer(drive,orient=wx.VERTICAL)
self.movebase = wx.Panel(self,size=(width,width-20))
self.movebase.SetBackgroundColour('WHITE')
self.movebase.Bind(wx.EVT_MOTION, self.onMove)
wx.StaticLine(self.movebase, -1, (width/2, 0), (1,width), style=wx.LI_VERTICAL)
wx.StaticLine(self.movebase, -1, (0, width/2), (width,1))
driveBox.Add(self.movebase)
sizer.Add(driveBox,(0,0),wx.GBSpan(1,1),wx.EXPAND|wx.TOP|wx.BOTTOM|wx.LEFT,5)
self.forward = 0
self.turn = 0
self.X = 0
self.Y = 0
self.cmd_vel = rospy.Publisher('cmd_vel', Twist)
# Move Servos
servo = wx.StaticBox(self, -1, 'Move Servos')
servo.SetFont(wx.Font(10, wx.DEFAULT, wx.NORMAL, wx.BOLD))
servoBox = wx.StaticBoxSizer(servo,orient=wx.VERTICAL)
servoSizer = wx.GridBagSizer(5,5)
joint_defaults = getJointsFromURDF()
i = 0
dynamixels = rospy.get_param('/arbotix/dynamixels', dict())
self.servos = list()
self.publishers = list()
self.relaxers = list()
joints = rospy.get_param('/arbotix/joints', dict())
# create sliders and publishers
for name in sorted(joints.keys()):
# pull angles
min_angle, max_angle = getJointLimits(name, joint_defaults)
# create publisher
self.publishers.append(rospy.Publisher(name+'/command', Float64))
if rospy.get_param('/arbotix/joints/'+name+'/type','dynamixel') == 'dynamixel':
self.relaxers.append(rospy.ServiceProxy(name+'/relax', Relax))
else:
self.relaxers.append(None)
# create slider
s = servoSlider(self, min_angle, max_angle, name, i)
servoSizer.Add(s.enabled,(i,0), wx.GBSpan(1,1),wx.ALIGN_CENTER_VERTICAL)
servoSizer.Add(s.position,(i,1), wx.GBSpan(1,1),wx.ALIGN_CENTER_VERTICAL)
self.servos.append(s)
i += 1
# add everything
servoBox.Add(servoSizer)
sizer.Add(servoBox, (0,1), wx.GBSpan(1,1), wx.EXPAND|wx.TOP|wx.BOTTOM|wx.RIGHT,5)
self.Bind(wx.EVT_CHECKBOX, self.enableSliders)
# now we can subscribe
rospy.Subscriber('joint_states', JointState, self.stateCb)
# timer for output
self.timer = wx.Timer(self, self.TIMER_ID)
self.timer.Start(50)
wx.EVT_CLOSE(self, self.onClose)
wx.EVT_TIMER(self, self.TIMER_ID, self.onTimer)
# bind the panel to the paint event
wx.EVT_PAINT(self, self.onPaint)
self.dirty = 1
self.onPaint()
self.SetSizerAndFit(sizer)
self.Show(True)
def __init__(self, parent, log):
self.log = log
wx.Frame.__init__(self,
parent,
-1,
"Shaped Window",
style=wx.FRAME_SHAPED
| wx.FRAME_NO_TASKBAR
| wx.STAY_ON_TOP)
self.hasShape = False
self.delta = (0, 0)
self.Bind(wx.EVT_LEFT_DCLICK, self.OnDoubleClick)
self.Bind(wx.EVT_LEFT_DOWN, self.OnLeftDown)
self.Bind(wx.EVT_LEFT_UP, self.OnLeftUp)
self.Bind(wx.EVT_MOTION, self.OnMouseMove)
self.Bind(wx.EVT_RIGHT_UP, self.OnExit)
self.Bind(wx.EVT_PAINT, self.OnPaint)
self.bmp = wx.Bitmap(gImgDir + os.sep + 'shapedframe.png',
wx.BITMAP_TYPE_PNG)
w, h = self.bmp.GetWidth(), self.bmp.GetHeight()
self.SetClientSize((w, h))
if wx.Platform != "__WXMAC__":
# wxMac clips the tooltip to the window shape, YUCK!!!
self.SetToolTip(
wx.ToolTip(
"Right-click to close the window\n"
"Double-click the image to set/unset the window shape"))
if wx.Platform == "__WXGTK__":
# wxGTK requires that the window be created before you can
# set its shape, so delay the call to SetWindowShape until
# this event.
self.Bind(wx.EVT_WINDOW_CREATE, self.SetWindowShape)
else:
# On wxMSW and wxMac the window has already been created, so go for it.
self.SetWindowShape()
dc = wx.ClientDC(self)
dc.DrawBitmap(self.bmp, 0, 0, True)
#----- Start ShapedBitmapButton Stuff -----#
bmp1 = wx.Bitmap(gImgDir + os.sep + 'shapedbutton-normal64x40.png')
bmp2 = wx.Bitmap(gImgDir + os.sep + 'shapedbutton-pressed64x40.png')
bmp3 = wx.Bitmap(gImgDir + os.sep + 'shapedbutton-hover64x40.png')
sbbtn1 = SBB.ShapedBitmapButton(self,
-1,
bitmap=bmp1,
pressedBmp=bmp2,
hoverBmp=bmp3,
disabledBmp=None,
parentBgBmp=self.bmp,
pos=(104, 10))
img1 = wx.Image(gImgDir + os.sep +
'shapedbutton-hover64x40.png').Rotate90().Mirror(True)
img2 = wx.Image(gImgDir + os.sep +
'shapedbutton-normal64x40.png').Rotate90().Mirror(True)
img3 = wx.Image(gImgDir + os.sep +
'shapedbutton-pressed64x40.png').Rotate90().Mirror(
True)
bmp1 = img1.ConvertToBitmap()
bmp2 = img2.ConvertToBitmap()
bmp3 = img3.ConvertToBitmap()
sbbtn2 = SBB.ShapedBitmapButton(self,
-1,
bitmap=bmp1,
pressedBmp=bmp2,
hoverBmp=bmp3,
disabledBmp=None,
parentBgBmp=self.bmp,
pos=(10, 104))
sbbtn3 = SBB.ShapedBitmapButton(
self,
-1,
bitmap=wx.Bitmap(gImgDir + os.sep + 'bigcheck128.png'),
pressedBmp=wx.Bitmap(gImgDir + os.sep + 'bigcheck128-pressed.png'),
hoverBmp=wx.Bitmap(gImgDir + os.sep + 'bigcheck128-hover.png'),
disabledBmp=wx.Bitmap(gImgDir + os.sep +
'bigcheck128-disabled.png'),
parentBgBmp=self.bmp,
pos=(48, 200),
# style=wx.BORDER_SIMPLE | wx.WANTS_CHARS
)
sbbtn4 = SBB.ShapedBitmapButton(
self,
-1,
bitmap=wx.Bitmap(gImgDir + os.sep + 'shapedbutton-normal.png'),
pressedBmp=wx.Bitmap(gImgDir + os.sep +
'shapedbutton-pressed.png'),
hoverBmp=wx.Bitmap(gImgDir + os.sep + 'shapedbutton-hover.png'),
disabledBmp=wx.Bitmap(gImgDir + os.sep +
'shapedbutton-disabled.png'),
parentBgBmp=self.bmp,
label='New Widget',
# labelColour=wx.WHITE,
labelRotation=27.0,
labelPosition=(4, 68),
labelFont=wx.Font(11, wx.FONTFAMILY_DEFAULT, wx.FONTSTYLE_NORMAL,
wx.FONTWEIGHT_BOLD),
pos=(192, 200),
# style=wx.BORDER_SIMPLE
)
sbbtn4.SetToolTip(wx.ToolTip('This is a ShapedBitmapButton.'))
sbbtn4.Bind(wx.EVT_TIMER, self.OnTimer)
sbbtn4.timer = wx.Timer(sbbtn4)
sbbtn4.timer.Start(500) # Every half a second.
sbbtn5 = SBB.ShapedBitmapButton(
self,
wx.ID_CLOSE,
bitmap=wx.Bitmap(gImgDir + os.sep + 'bigx128.png'),
pressedBmp=wx.Bitmap(gImgDir + os.sep + 'bigx128-pressed.png'),
hoverBmp=wx.Bitmap(gImgDir + os.sep + 'bigx128-hover.png'),
disabledBmp=wx.Bitmap(gImgDir + os.sep + 'bigx128-disabled.png'),
parentBgBmp=self.bmp,
pos=(336, 200),
# style=wx.BORDER_SIMPLE
)
sbbtn6 = SBB.ShapedBitmapButton(
self,
-1,
bitmap=wx.Bitmap(gImgDir + os.sep +
'shapedbitmapbutton_text_normal.png'),
pressedBmp=wx.Bitmap(gImgDir + os.sep +
'shapedbitmapbutton_text_pressed.png'),
hoverBmp=wx.Bitmap(gImgDir + os.sep +
'shapedbitmapbutton_text_hover.png'),
parentBgBmp=self.bmp,
pos=(176, 68),
# style=wx.BORDER_SIMPLE
)
# Lets bind all the ShapedBitmapButtons.
for child in self.GetChildren():
child.Bind(wx.EVT_BUTTON, self.OnButton)
self.Centre()
def __init__(self, parent):
wx.Panel.__init__(self, parent)
self.transmitter=None
self.figure = Figure(figsize=(0.5, 0.5))
self.axes = self.figure.add_subplot(111, axisbg='0.1')
self.canvas = FigureCanvas(self, -1, self.figure)
setup_plot(self.figure, self.axes)
self.vsizer = wx.BoxSizer(wx.VERTICAL)
self.sizer_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.tx_sizer = wx.BoxSizer(wx.VERTICAL)
self.rx_sizer = wx.BoxSizer(wx.VERTICAL)
self.settings_sizer = wx.BoxSizer(wx.VERTICAL)
self.preset_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.freq_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.freq_offset_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.gain_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.ppm_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.squelch_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.lpf_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.fm_deviation_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.source_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.destination_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.mode_sizer = wx.BoxSizer(wx.HORIZONTAL)
self.presets = wx.Choice(self, choices=sorted(presets.keys()))
self.save_preset = wx.Button(self, label="Save as...")
self.del_preset = wx.Button(self, label="delete")
self.frequency = wx.TextCtrl(self, value="30")
self.frequency_units = wx.Choice(self, choices=units)
self.rx_frequency_offset = wx.TextCtrl(self, value="0")
self.rx_gain = wx.TextCtrl(self, value="automatic")
self.rx_ppm = wx.TextCtrl(self, value="0")
self.rx_squelch = wx.TextCtrl(self, value="0")
self.lpf = wx.TextCtrl(self, value="3000")
self.fm_deviation = wx.TextCtrl(self, value="5000")
self.fm_deviation.Disable()
self.mode = wx.Choice(self, choices=modes)
self.source = wx.Choice(self, choices=sources)
self.destination = wx.Choice(self, choices=sources)
self.input_file_button = filebrowse.FileBrowseButton(self,
labelText="Input File:")
self.device_button = filebrowse.FileBrowseButton(self,
labelText="Transmitter:", initialValue="/dev/ttyUSB1")
self.input_file_button.Disable()
self.output_file_button = filebrowse.FileBrowseButton(self,
labelText="Output File:", fileMode=wx.SAVE)
self.output_file_button.Disable()
self.tx = wx.ToggleButton(self, label="TX")
self.rx = wx.ToggleButton(self, label="RX")
self.Bind(wx.EVT_TOGGLEBUTTON, self.on_transmit, self.tx)
self.Bind(wx.EVT_TOGGLEBUTTON, self.on_receive, self.rx)
self.Bind(wx.EVT_CHOICE, self.on_mode, self.mode)
self.Bind(wx.EVT_CHOICE, self.on_source, self.source)
self.Bind(wx.EVT_CHOICE, self.on_destination, self.destination)
self.Bind(wx.EVT_CHOICE, self.on_preset, self.presets)
self.Bind(wx.EVT_BUTTON, self.on_save_preset, self.save_preset)
self.Bind(wx.EVT_BUTTON, self.on_del_preset, self.del_preset)
self.vsizer.Add(self.canvas, 1, wx.EXPAND | wx.ALL)
self.preset_sizer.Add(wx.StaticText(self, label="Preset: "), 0, wx.CENTER)
self.preset_sizer.Add(self.presets, 1)
self.preset_sizer.Add(self.save_preset, 0.5)
self.preset_sizer.Add(self.del_preset, 0.5)
self.vsizer.Add(self.preset_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.tx_sizer.Add(wx.StaticText(self, label="Transmitter Settings"), 0, wx.CENTER | wx.ALL, 10)
self.freq_sizer.Add(wx.StaticText(self, label="Frequency: "), 0, wx.CENTER)
self.freq_sizer.Add(self.frequency, 1)
self.freq_sizer.Add(self.frequency_units, 0.5)
self.tx_sizer.Add(self.freq_sizer, 0, wx.EXPAND | wx.ALL, 3)
self.lpf_sizer.Add(wx.StaticText(self, label="Audio Cutoff (Hz): "), 0, wx.CENTER)
self.lpf_sizer.Add(self.lpf, 1)
self.tx_sizer.Add(self.lpf_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.fm_deviation_sizer.Add(wx.StaticText(self, label="FM Deviation (Hz): "), 0, wx.CENTER)
self.fm_deviation_sizer.Add(self.fm_deviation, 1)
self.tx_sizer.Add(self.fm_deviation_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.mode_sizer.Add(wx.StaticText(self, label="Mode:"), 0, wx.CENTRE)
self.mode_sizer.Add(self.mode, 1, wx.EXPAND | wx.ALL)
self.tx_sizer.Add(self.mode_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.source_sizer.Add(wx.StaticText(self, label="Source:"), 0, wx.CENTRE)
self.source_sizer.Add(self.source, 1, wx.EXPAND | wx.ALL)
self.tx_sizer.Add(self.source_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.tx_sizer.Add(self.input_file_button, 0, wx.EXPAND | wx.ALL, 5)
self.tx_sizer.Add(self.device_button, 0, wx.EXPAND | wx.ALL, 5)
self.tx_sizer.Add(self.tx, 0, wx.EXPAND | wx.ALL)
self.sizer_sizer.Add(self.tx_sizer, 1, wx.EXPAND | wx.ALL)
self.sizer_sizer.Add(wx.StaticLine(self, style=wx.LI_VERTICAL), 0, wx.ALL|wx.EXPAND, 5)
self.rx_sizer.Add(wx.StaticText(self, label="Receiver Settings"), 0, wx.CENTRE | wx.ALL, 10)
self.freq_offset_sizer.Add(wx.StaticText(self, label="Frequency Offset (Hz):"), 0, wx.CENTRE)
self.freq_offset_sizer.Add(self.rx_frequency_offset, 1, wx.EXPAND | wx.ALL)
self.rx_sizer.Add(self.freq_offset_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.gain_sizer.Add(wx.StaticText(self, label="Gain (dB):"), 0, wx.CENTRE)
self.gain_sizer.Add(self.rx_gain, 1)
self.rx_sizer.Add(self.gain_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.ppm_sizer.Add(wx.StaticText(self, label="Frequency Correction (ppm):"), 0, wx.CENTRE)
self.ppm_sizer.Add(self.rx_ppm, 1)
self.rx_sizer.Add(self.ppm_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.squelch_sizer.Add(wx.StaticText(self, label="Squelch (dB):"), 0, wx.CENTRE)
self.squelch_sizer.Add(self.rx_squelch, 1)
self.rx_sizer.Add(self.squelch_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.rx_sizer.Add((10,10), 1, wx.EXPAND | wx.ALL)
self.destination_sizer.Add(wx.StaticText(self, label="Destination:"), 0, wx.CENTRE)
self.destination_sizer.Add(self.destination, 1, wx.EXPAND | wx.ALL)
self.rx_sizer.Add(self.destination_sizer, 0, wx.EXPAND | wx.ALL, 5)
self.rx_sizer.Add(self.output_file_button, 0, wx.EXPAND | wx.ALL, 5)
self.rx_sizer.Add(self.rx, 0, wx.EXPAND | wx.ALL)
self.sizer_sizer.Add(self.rx_sizer, 1, wx.EXPAND | wx.ALL)
self.vsizer.Add(self.sizer_sizer, 0, wx.EXPAND, 10)
self.SetSizer(self.vsizer)
self.Fit()
self.line = None
self.t1 = wx.Timer(self)
self.t1.Start(100)
self.Bind(wx.EVT_TIMER, self.on_timer)
self.transmitter = None
self.transmitter_thread = None
self.transmitter_pipe = None
self.receiver_pipe = None
self.sox_pipe = None
def __init__(self, parent=None):
super(SetupWizard, self).__init__(parent, id=wx.ID_ANY, title=u"FreeMyCall Setup Wizard",
pos=wx.DefaultPosition,
size=wx.Size(596, 385), style=wx.NO_BORDER | wx.FRAME_SHAPED)
self.SetBackgroundColour(wx.Colour(255, 255, 255, 0))
self.SetSizeHintsSz(wx.DefaultSize, wx.DefaultSize)
image = wx.Image(u"images/wizard/mask.png", wx.BITMAP_TYPE_PNG)
image.SetMaskColour(255, 0, 0)
image.SetMask(True)
self.bmp = wx.BitmapFromImage(image)
self.SetShape(wx.RegionFromBitmap(self.bmp))
self.bgpanel = BackgroundPanel(u"images/wizard/background.png", self, wx.ID_ANY, wx.DefaultPosition,
size=(596, 385), style=wx.TAB_TRAVERSAL | wx.NO_BORDER)
self.bgpanel.SetMinSize(wx.Size(596, 385))
self.bgpanel.Bind(wx.EVT_MOTION, self.OnMouse)
self.bgpanel.Bind(wx.EVT_LEFT_DOWN, self.OnMouseDown)
self.bgpanel.Bind(wx.EVT_LEAVE_WINDOW, self.OnMouseLeave)
self.next_button = wx.Button(self.bgpanel, wx.ID_ANY, u"Next", wx.Point(491, 340), wx.DefaultSize, 0)
self.next_button.Bind(wx.EVT_BUTTON, self.OnClickNext)
self.prev_button = wx.Button(self.bgpanel, wx.ID_ANY, u"Previous", wx.Point(386, 340), wx.DefaultSize, 0)
self.prev_button.Bind(wx.EVT_BUTTON, self.OnClickPrev)
self.prev_button.Disable()
####################################################
#
# Describing the panels here
#
####################################################
self.panel1 = BackgroundPanel(u"", self.bgpanel, wx.ID_ANY, wx.Point(2, 88), wx.Size(591, 230),
wx.TAB_TRAVERSAL | wx.NO_BORDER)
# self.panel1.SetMinSize(wx.Size(591, 230))
text_panel1_s1 = TransparentText(self.panel1, wx.ID_ANY, u"Step 1: Audio output device",
wx.DefaultPosition,
wx.Size(200, 20), 0)
text_panel1_s1.SetFont(wx.Font(11, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_BOLD, False, "Arial"))
text_panel1_s1.SetForegroundColour(wx.Colour(3, 106, 157))
# self.text_playtone = TransparentText(self.panel1, wx.ID_ANY, u"Not playing", wx.DefaultPosition,
# wx.Size(100, 20), 0)
self.text_playtone = wx.StaticText(self.panel1, label=u"Not playing")
self.text_playtone.SetFont(wx.Font(9, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_BOLD, False, "Arial"))
self.text_playtone.SetForegroundColour(wx.Colour(102, 102, 102))
self.text_playtone.SetBackgroundColour(wx.WHITE)
htext = u"Select the speaker or headphone that you would\n" \
u"like to use as the audio output device.\n" \
u"Headphones are recommended over speakers."
helptext = TransparentText(self.panel1, wx.ID_ANY, htext, wx.DefaultPosition,
wx.Size(200, 20), 0)
helptext.SetFont(wx.Font(10, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_NORMAL, False, "Arial"))
helptext.SetForegroundColour(wx.Colour(3, 106, 157))
spk_icon = TransparentBitmap(u'images/bar/speaker-button.png', self.panel1, wx.ID_ANY, wx.DefaultPosition,
wx.DefaultSize, 0)
# Get the
self.spk_cb = wx.ComboBox(self.panel1, wx.ID_ANY, u"", wx.DefaultPosition, wx.Size(190, 32), "",
wx.CB_READONLY | wx.TRANSPARENT_WINDOW)
self.spk_cb.SetMinSize(wx.Size(190, 32))
self.button_playtone = wx.Button(self.panel1, wx.ID_ANY, u"Play test tone", wx.DefaultPosition, wx.DefaultSize,
0)
self.button_playtone.Bind(wx.EVT_BUTTON, self.playTestTone)
text_panel1_s1.SetPosition(wx.Point(60, 20))
spk_icon.SetPosition(wx.Point(75, 55))
spk_icon.SetSize(spk_icon.DoGetBestSize())
self.spk_cb.SetPosition(wx.Point(185, 60))
self.button_playtone.SetPosition(wx.Point(405, 58))
self.text_playtone.SetPosition(wx.Point(410, 100))
helptext.SetPosition(wx.Point(185, 160))
self.panel1.Show()
###########################################################
#
# Panel 2 (mic) starts
#
############################################################
self.panel2 = BackgroundPanel(u"", self.bgpanel, wx.ID_ANY, wx.Point(2, 88), wx.Size(591, 230),
wx.TAB_TRAVERSAL | wx.NO_BORDER)
self.panel2.SetMinSize(wx.Size(591, 230))
self.mic_cb = wx.ComboBox(self.panel2, wx.ID_ANY, u"", wx.DefaultPosition, wx.Size(190, 32), "",
wx.CB_READONLY | wx.TRANSPARENT_WINDOW)
self.mic_cb.SetMinSize(wx.Size(190, 32))
mic_icon = TransparentBitmap(u'images/bar/mic-button.png', self.panel2, wx.ID_ANY, wx.DefaultPosition,
wx.DefaultSize, 0)
text_panel2_s1 = TransparentText(self.panel2, wx.ID_ANY, u"Step 2: Audio input device",
wx.DefaultPosition,
wx.Size(200, 20), 0)
text_panel2_s1.SetFont(wx.Font(11, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_BOLD, False, "Arial"))
text_panel2_s1.SetForegroundColour(wx.Colour(3, 106, 157))
# htext2 = u"Select the speaker or headphone that you would\n" \
# u"like to use as the audio output device.\n" \
# u"Headphones are recommended over speakers."
# helptext2 = TransparentText(self.panel2, wx.ID_ANY, htext2, wx.DefaultPosition,
# wx.Size(200, 20), 0)
# helptext2.SetFont(wx.Font(10, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_NORMAL, False, "Arial"))
# helptext2.SetForegroundColour(wx.Colour(3, 106, 157))
text_panel2_s1.SetPosition(wx.Point(60, 20))
mic_icon.SetPosition(wx.Point(75, 55))
mic_icon.SetSize(spk_icon.DoGetBestSize())
self.mic_cb.SetPosition(wx.Point(185, 60))
# helptext2.SetPosition(wx.Point(185, 160))
self.panel2.Hide()
###########################################################
#
# Panel 3 (review) starts
#
############################################################
self.panel3 = BackgroundPanel(u"", self.bgpanel, wx.ID_ANY, wx.Point(2, 88), wx.Size(591, 230),
wx.TAB_TRAVERSAL | wx.NO_BORDER)
self.panel3.SetMinSize(wx.Size(591, 230))
text_panel3_s1 = TransparentText(self.panel3, wx.ID_ANY, u"Step 3: Review Settings",
wx.DefaultPosition,
wx.Size(200, 20), 0)
text_panel3_s1.SetFont(wx.Font(11, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_BOLD, False, "Arial"))
text_panel3_s1.SetForegroundColour(wx.Colour(3, 106, 157))
self.mictext = TransparentText(self.panel3, wx.ID_ANY, u"mic name", (50, 50),
wx.Size(200, 20), 0)
self.spktext = TransparentText(self.panel3, wx.ID_ANY, u"spk name", (50, 50),
wx.Size(200, 20), 0)
self.spktext.SetFont(wx.Font(10, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_NORMAL, False, "Arial"))
self.spktext.SetForegroundColour(wx.Colour(3, 106, 157))
self.mictext.SetFont(wx.Font(10, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_NORMAL, False, "Arial"))
self.mictext.SetForegroundColour(wx.Colour(3, 106, 157))
p3_mic_icon = TransparentBitmap(u'images/bar/mic-button.png', self.panel3, wx.ID_ANY, wx.DefaultPosition,
wx.DefaultSize, 0)
p3_spk_icon = TransparentBitmap(u'images/bar/speaker-button.png', self.panel3, wx.ID_ANY, wx.DefaultPosition,
wx.DefaultSize, 0)
htext3 = u"Click finish to save settings and open dialer."
helptext3 = TransparentText(self.panel3, wx.ID_ANY, htext3, wx.DefaultPosition,
wx.Size(200, 20), 0)
helptext3.SetFont(wx.Font(10, wx.FONTFAMILY_SWISS, 90, wx.FONTWEIGHT_NORMAL, False, "Arial"))
helptext3.SetForegroundColour(wx.Colour(3, 106, 157))
text_panel3_s1.SetPosition(wx.Point(60, 20))
p3_spk_icon.SetPosition(wx.Point(75, 55))
p3_mic_icon.SetPosition(wx.Point(75, 95))
self.spktext.SetPosition(wx.Point(185, 60))
self.mictext.SetPosition(wx.Point(185, 100))
helptext3.SetPosition(wx.Point(185, 190))
self.panel3.Hide()
self.panel3.Bind(wx.EVT_SHOW, self.OnShowReview)
self.spk_cb.Bind(wx.EVT_COMBOBOX, self.audioDevChange)
self.mic_cb.Bind(wx.EVT_COMBOBOX, self.audioDevChange)
##################################################################################
##################################################################################
self.m_pages = [self.panel1, self.panel2, self.panel3]
self.m_index = 0
self.app = wx.GetApp()
self.tone_timer = wx.Timer(self, TIMER_TESTTONE_ID)
wx.EVT_TIMER(self, TIMER_TESTTONE_ID, self.timerTick)
self.header_distance = 73
self.dragenable = False
self.playenable = True
self.Centre(wx.BOTH)
def __init__(self,
parent,
tbstyle=TB_SIMPLE,
windowstyle=TB_DEFAULT_STYLE,
closingstyle=TB_ONTIME,
scrollType=TB_SCR_TYPE_DU):
"""
Default class constructor.
:param `parent`: the window parent;
:param `tbstyle`: the :class:`ToasterBox` main style. Can be one of the following
bits:
====================== ======= ================================
`ToasterBox` Style Value Description
====================== ======= ================================
``TB_SIMPLE`` 0x1 A simple :class:`ToasterBox`, with background image and text customization can be created
``TB_COMPLEX`` 0x2 `ToasterBoxes` with different degree of complexity can be created. You can add as many controls as you want, provided that you call the :meth:`~ToasterBox.AddPanel` method and pass to it a dummy frame and a :class:`Panel`.
====================== ======= ================================
:param `windowstyle`: this parameter influences the visual appearance of
:class:`ToasterBox`, and can be one of the following styles:
====================== ========== ================================
Window Style Hex Value Description
====================== ========== ================================
``TB_DEFAULT_STYLE`` 0x2008002 Default window style for :class:`ToasterBox`, with no caption nor close box.
``TB_CAPTION`` 0x22009806 :class:`ToasterBox` will have a caption, with the possibility to set a title for the :class:`ToasterBox` frame, and a close box.
====================== ========== ================================
:param `closingstyle`: the closing style for :class:`ToasterBox`. Can be one of the
following bits:
==================== =========== ==================================================
Closing Styles Hex Value Description
==================== =========== ==================================================
``TB_ONTIME`` 0x1 :class:`ToasterBox` will close after a specified amount of time.
``TB_ONCLICK`` 0x2 :class:`ToasterBox` can be closed by clicking anywhere on the :class:`ToasterBox` frame.
==================== =========== ==================================================
:param `scrollType`: the scrolling direction for :class:`ToasterBox`. Can be one of the
following bits:
==================== =========== ==================================================
Scroll Styles Hex Value Description
==================== =========== ==================================================
``TB_SCR_TYPE_UD`` 0x1 :class:`ToasterBox` will scroll from up to down
``TB_SCR_TYPE_DU`` 0x2 :class:`ToasterBox` will scroll from down to up
``TB_SCR_TYPE_FADE`` 0x4 :class:`ToasterBox` will fade in/out (without scrolling).
==================== =========== ==================================================
"""
self._parent = parent
self._sleeptime = 10
self._pausetime = 1700
self._popuptext = "default"
self._popupposition = wx.Point(100, 100)
self._popuptop = wx.Point(0, 0)
self._popupsize = wx.Size(150, 170)
self._usefocus = True
self._originalfocus = wx.Window.FindFocus()
self._backgroundcolour = wx.WHITE
self._foregroundcolour = wx.BLACK
self._textfont = wx.Font(8, wx.FONTFAMILY_SWISS, wx.FONTSTYLE_NORMAL,
wx.FONTWEIGHT_NORMAL, False, "Verdana")
self._bitmap = None
self._tbstyle = tbstyle
self._windowstyle = windowstyle
self._closingstyle = closingstyle
self._scrollType = scrollType
self._panel = None
self._bottomright = wx.Point(wx.GetDisplaySize().GetWidth(),
wx.GetDisplaySize().GetHeight())
if parent is not None:
parent.Bind(wx.EVT_ICONIZE,
lambda evt: [w.Hide() for w in winlist])
self._moveTimer = wx.Timer(parent, -1)
parent.Bind(wx.EVT_TIMER, self.OnMoveTimer, self._moveTimer)
self._tb = ToasterBoxWindow(self._parent,
self,
self._tbstyle,
self._windowstyle,
self._closingstyle,
scrollType=self._scrollType)
def __init__(self):
super(mainWindow,
self).__init__(None, title='Cura - ' + version.getVersion())
wx.EVT_CLOSE(self, self.OnClose)
# allow dropping any file, restrict later
self.SetDropTarget(dropTarget.FileDropTarget(self.OnDropFiles))
# TODO: wxWidgets 2.9.4 has a bug when NSView does not register for dragged types when wx drop target is set. It was fixed in 2.9.5
if sys.platform.startswith('darwin'):
try:
import objc
nswindow = objc.objc_object(
c_void_p=self.MacGetTopLevelWindowRef())
view = nswindow.contentView()
view.registerForDraggedTypes_([u'NSFilenamesPboardType'])
except:
pass
self.normalModeOnlyItems = []
mruFile = os.path.join(profile.getBasePath(), 'mru_filelist.ini')
self.config = wx.FileConfig(appName="Cura",
localFilename=mruFile,
style=wx.CONFIG_USE_LOCAL_FILE)
self.ID_MRU_MODEL1, self.ID_MRU_MODEL2, self.ID_MRU_MODEL3, self.ID_MRU_MODEL4, self.ID_MRU_MODEL5, self.ID_MRU_MODEL6, self.ID_MRU_MODEL7, self.ID_MRU_MODEL8, self.ID_MRU_MODEL9, self.ID_MRU_MODEL10 = [
wx.NewId() for line in xrange(10)
]
self.modelFileHistory = wx.FileHistory(10, self.ID_MRU_MODEL1)
self.config.SetPath("/ModelMRU")
self.modelFileHistory.Load(self.config)
self.ID_MRU_PROFILE1, self.ID_MRU_PROFILE2, self.ID_MRU_PROFILE3, self.ID_MRU_PROFILE4, self.ID_MRU_PROFILE5, self.ID_MRU_PROFILE6, self.ID_MRU_PROFILE7, self.ID_MRU_PROFILE8, self.ID_MRU_PROFILE9, self.ID_MRU_PROFILE10 = [
wx.NewId() for line in xrange(10)
]
self.profileFileHistory = wx.FileHistory(10, self.ID_MRU_PROFILE1)
self.config.SetPath("/ProfileMRU")
self.profileFileHistory.Load(self.config)
self.menubar = wx.MenuBar()
self.fileMenu = wx.Menu()
i = self.fileMenu.Append(-1, _("Load model file...\tCTRL+L"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showLoadModel(), i)
i = self.fileMenu.Append(-1, _("Save model...\tCTRL+S"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveModel(), i)
i = self.fileMenu.Append(-1, _("Reload platform\tF5"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.reloadScene(e), i)
i = self.fileMenu.Append(-1, _("Clear platform"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnDeleteAll(e), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Print...\tCTRL+P"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.OnPrintButton(1), i)
i = self.fileMenu.Append(-1, _("Save GCode...\tCTRL+G"))
self.Bind(wx.EVT_MENU, lambda e: self.scene.showSaveGCode(), i)
i = self.fileMenu.Append(-1, _("Show slice engine log..."))
self.Bind(wx.EVT_MENU, lambda e: self.scene._showEngineLog(), i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Open Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfile, i)
i = self.fileMenu.Append(-1, _("Save Profile..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveProfile, i)
if version.isDevVersion():
i = self.fileMenu.Append(-1, "Save difference from default...")
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnSaveDifferences, i)
i = self.fileMenu.Append(-1, _("Load Profile from GCode..."))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnLoadProfileFromGcode, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Reset Profile to default"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnResetProfile, i)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(-1, _("Preferences...\tCTRL+,"))
self.Bind(wx.EVT_MENU, self.OnPreferences, i)
i = self.fileMenu.Append(-1, _("Machine settings..."))
self.Bind(wx.EVT_MENU, self.OnMachineSettings, i)
self.fileMenu.AppendSeparator()
# Model MRU list
modelHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), '&' + _("Recent Model Files"),
modelHistoryMenu)
self.modelFileHistory.UseMenu(modelHistoryMenu)
self.modelFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE,
self.OnModelMRU,
id=self.ID_MRU_MODEL1,
id2=self.ID_MRU_MODEL10)
# Profle MRU list
profileHistoryMenu = wx.Menu()
self.fileMenu.AppendMenu(wx.NewId(), _("Recent Profile Files"),
profileHistoryMenu)
self.profileFileHistory.UseMenu(profileHistoryMenu)
self.profileFileHistory.AddFilesToMenu()
self.Bind(wx.EVT_MENU_RANGE,
self.OnProfileMRU,
id=self.ID_MRU_PROFILE1,
id2=self.ID_MRU_PROFILE10)
self.fileMenu.AppendSeparator()
i = self.fileMenu.Append(wx.ID_EXIT, _("Quit"))
self.Bind(wx.EVT_MENU, self.OnQuit, i)
self.menubar.Append(self.fileMenu, '&' + _("File"))
toolsMenu = wx.Menu()
#i = toolsMenu.Append(-1, 'Batch run...')
#self.Bind(wx.EVT_MENU, self.OnBatchRun, i)
#self.normalModeOnlyItems.append(i)
if minecraftImport.hasMinecraft():
i = toolsMenu.Append(-1, _("Minecraft map import..."))
self.Bind(wx.EVT_MENU, self.OnMinecraftImport, i)
if version.isDevVersion():
i = toolsMenu.Append(-1, _("PID Debugger..."))
self.Bind(wx.EVT_MENU, self.OnPIDDebugger, i)
i = toolsMenu.Append(-1, _("Auto Firmware Update..."))
self.Bind(wx.EVT_MENU, self.OnAutoFirmwareUpdate, i)
#i = toolsMenu.Append(-1, _("Copy profile to clipboard"))
#self.Bind(wx.EVT_MENU, self.onCopyProfileClipboard,i)
toolsMenu.AppendSeparator()
self.allAtOnceItem = toolsMenu.Append(-1,
_("Print all at once"),
kind=wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.onOneAtATimeSwitch, self.allAtOnceItem)
self.oneAtATime = toolsMenu.Append(-1,
_("Print one at a time"),
kind=wx.ITEM_RADIO)
self.Bind(wx.EVT_MENU, self.onOneAtATimeSwitch, self.oneAtATime)
if profile.getPreference('oneAtATime') == 'True':
self.oneAtATime.Check(True)
else:
self.allAtOnceItem.Check(True)
self.menubar.Append(toolsMenu, _("Tools"))
#Machine menu for machine configuration/tooling
self.machineMenu = wx.Menu()
self.updateMachineMenu()
self.menubar.Append(self.machineMenu, _("Machine"))
expertMenu = wx.Menu()
i = expertMenu.Append(-1,
_("Switch to quickprint..."),
kind=wx.ITEM_RADIO)
self.switchToQuickprintMenuItem = i
self.Bind(wx.EVT_MENU, self.OnSimpleSwitch, i)
i = expertMenu.Append(-1,
_("Switch to full settings..."),
kind=wx.ITEM_RADIO)
self.switchToNormalMenuItem = i
self.Bind(wx.EVT_MENU, self.OnNormalSwitch, i)
expertMenu.AppendSeparator()
i = expertMenu.Append(-1, _("Open expert settings...\tCTRL+E"))
self.normalModeOnlyItems.append(i)
self.Bind(wx.EVT_MENU, self.OnExpertOpen, i)
expertMenu.AppendSeparator()
self.bedLevelWizardMenuItem = expertMenu.Append(
-1, _("Run bed leveling wizard..."))
self.Bind(wx.EVT_MENU, self.OnBedLevelWizard,
self.bedLevelWizardMenuItem)
self.headOffsetWizardMenuItem = expertMenu.Append(
-1, _("Run head offset wizard..."))
self.Bind(wx.EVT_MENU, self.OnHeadOffsetWizard,
self.headOffsetWizardMenuItem)
self.menubar.Append(expertMenu, _("Expert"))
helpMenu = wx.Menu()
i = helpMenu.Append(-1, _("Online documentation..."))
self.Bind(wx.EVT_MENU,
lambda e: webbrowser.open('http://daid.github.com/Cura'), i)
i = helpMenu.Append(-1, _("Report a problem..."))
self.Bind(
wx.EVT_MENU,
lambda e: webbrowser.open('https://github.com/daid/Cura/issues'),
i)
i = helpMenu.Append(-1, _("Check for update..."))
self.Bind(wx.EVT_MENU, self.OnCheckForUpdate, i)
i = helpMenu.Append(-1, _("Open YouMagine website..."))
self.Bind(wx.EVT_MENU,
lambda e: webbrowser.open('https://www.youmagine.com/'), i)
i = helpMenu.Append(-1, _("About Cura..."))
self.Bind(wx.EVT_MENU, self.OnAbout, i)
self.menubar.Append(helpMenu, _("Help"))
self.SetMenuBar(self.menubar)
self.splitter = wx.SplitterWindow(self,
style=wx.SP_3D | wx.SP_LIVE_UPDATE)
self.leftPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.rightPane = wx.Panel(self.splitter, style=wx.BORDER_NONE)
self.splitter.Bind(wx.EVT_SPLITTER_DCLICK, lambda evt: evt.Veto())
#Preview window
self.scene = sceneView.SceneView(self.rightPane)
##Gui components##
self.simpleSettingsPanel = simpleMode.simpleModePanel(
self.leftPane, self.scene.sceneUpdated)
self.normalSettingsPanel = normalSettingsPanel(self.leftPane,
self.scene.sceneUpdated)
self.leftSizer = wx.BoxSizer(wx.VERTICAL)
self.leftSizer.Add(self.simpleSettingsPanel, 1)
self.leftSizer.Add(self.normalSettingsPanel, 1, wx.EXPAND)
self.leftPane.SetSizer(self.leftSizer)
#Main sizer, to position the preview window, buttons and tab control
sizer = wx.BoxSizer()
self.rightPane.SetSizer(sizer)
sizer.Add(self.scene, 1, flag=wx.EXPAND)
# Main window sizer
sizer = wx.BoxSizer(wx.VERTICAL)
self.SetSizer(sizer)
sizer.Add(self.splitter, 1, wx.EXPAND)
sizer.Layout()
self.sizer = sizer
self.updateProfileToAllControls()
self.SetBackgroundColour(
self.normalSettingsPanel.GetBackgroundColour())
self.simpleSettingsPanel.Show(False)
self.normalSettingsPanel.Show(False)
# Set default window size & position
self.SetSize((wx.Display().GetClientArea().GetWidth() / 2,
wx.Display().GetClientArea().GetHeight() / 2))
self.Centre()
#Timer set; used to check if profile is on the clipboard
self.timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.onTimer)
#self.timer.Start(1000)
self.lastTriedClipboard = profile.getProfileString()
# Restore the window position, size & state from the preferences file
try:
if profile.getPreference('window_maximized') == 'True':
self.Maximize(True)
else:
posx = int(profile.getPreference('window_pos_x'))
posy = int(profile.getPreference('window_pos_y'))
width = int(profile.getPreference('window_width'))
height = int(profile.getPreference('window_height'))
if posx > 0 or posy > 0:
self.SetPosition((posx, posy))
if width > 0 and height > 0:
self.SetSize((width, height))
self.normalSashPos = int(
profile.getPreference('window_normal_sash'))
except:
self.normalSashPos = 0
self.Maximize(True)
if self.normalSashPos < self.normalSettingsPanel.printPanel.GetBestSize(
)[0] + 5:
self.normalSashPos = self.normalSettingsPanel.printPanel.GetBestSize(
)[0] + 5
self.splitter.SplitVertically(self.leftPane, self.rightPane,
self.normalSashPos)
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.Centre()
if wx.Display.GetFromPoint(
(self.GetPositionTuple()[0] + self.GetSizeTuple()[1],
self.GetPositionTuple()[1] + self.GetSizeTuple()[1])) < 0:
self.Centre()
if wx.Display.GetFromPoint(self.GetPosition()) < 0:
self.SetSize((800, 600))
self.Centre()
self.updateSliceMode()
self.scene.SetFocus()
self.dialogframe = None
if Publisher is not None:
Publisher().subscribe(self.onPluginUpdate, "pluginupdate")
pluginCount = self.normalSettingsPanel.pluginPanel.GetActivePluginCount(
)
if pluginCount == 1:
self.scene.notification.message(
"Warning: 1 plugin from the previous session is still active.")
if pluginCount > 1:
self.scene.notification.message(
"Warning: %i plugins from the previous session are still active."
% pluginCount)
def __init__(self, parent):
wx.Panel.__init__(self,
parent,
id=wx.ID_ANY,
pos=wx.DefaultPosition,
size=wx.DefaultSize,
style=wx.TAB_TRAVERSAL)
self.charEditor = self.Parent.Parent # first parent is Notebook, second is Character Editor
self.SetBackgroundColour(
wx.SystemSettings.GetColour(wx.SYS_COLOUR_WINDOW))
pmainSizer = wx.BoxSizer(wx.VERTICAL)
hSizer = wx.BoxSizer(wx.HORIZONTAL)
self.clonesChoice = wx.Choice(self, wx.ID_ANY, style=0)
i = self.clonesChoice.Append("Omega Clone", None)
self.clonesChoice.SetSelection(i)
hSizer.Add(self.clonesChoice, 5, wx.ALL | wx.EXPAND, 5)
self.searchInput = PlaceholderTextCtrl(self,
wx.ID_ANY,
placeholder="Search...")
hSizer.Add(self.searchInput, 1, wx.ALL | wx.EXPAND, 5)
self.searchInput.Bind(wx.EVT_TEXT, self.delaySearch)
sChar = Character.getInstance()
self.alphaClones = sChar.getAlphaCloneList()
char = self.charEditor.entityEditor.getActiveEntity()
for clone in self.alphaClones:
i = self.clonesChoice.Append(clone.alphaCloneName, clone.ID)
if clone.ID == char.alphaCloneID:
self.clonesChoice.SetSelection(i)
self.clonesChoice.Bind(wx.EVT_CHOICE, self.cloneChanged)
self.clonesChoice.SetToolTip(
wx.ToolTip(
"Setting an Alpha clone does not replace the character's skills, but rather caps them to Alpha levels."
))
pmainSizer.Add(hSizer, 0, wx.EXPAND | wx.ALL, 5)
# Set up timer for skill search
self.searchTimer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.populateSkillTreeSkillSearch,
self.searchTimer)
tree = self.skillTreeListCtrl = TreeListCtrl(
self, wx.ID_ANY, style=wx.dataview.TL_DEFAULT_STYLE)
pmainSizer.Add(tree, 1, wx.EXPAND | wx.ALL, 5)
self.imageList = wx.ImageList(16, 16)
tree.SetImageList(self.imageList)
self.skillBookImageId = self.imageList.Add(
wx.Icon(BitmapLoader.getBitmap("skill_small", "gui")))
self.skillBookDirtyImageId = self.imageList.Add(
wx.Icon(BitmapLoader.getBitmap("skill_small_red", "gui")))
tree.AppendColumn("Skill")
tree.AppendColumn("Level", align=wx.ALIGN_CENTER)
# tree.SetMainColumn(0)
self.root = tree.GetRootItem()
# self.root = tree.AppendItem(root, "Skills")
#
# tree.SetItemText(self.root, 1, "Levels")
# first one doesn't work right in Windows. Second one doesn't work right in GTK. Together, we make sure it works.
# Gotta love wx
tree.SetColumnWidth(0, 525)
tree.SetColumnWidth(1, 100)
self.btnSecStatus = wx.Button(
self, wx.ID_ANY, "Sec Status: {0:.2f}".format(char.secStatus
or 0.0))
self.btnSecStatus.Bind(wx.EVT_BUTTON, self.onSecStatus)
self.populateSkillTree()
tree.Bind(wx.dataview.EVT_TREELIST_ITEM_ACTIVATED, self.expand)
tree.Bind(wx.dataview.EVT_TREELIST_ITEM_EXPANDING, self.expandLookup)
tree.Bind(wx.dataview.EVT_TREELIST_ITEM_CONTEXT_MENU, self.spawnMenu)
bSizerButtons = wx.BoxSizer(wx.HORIZONTAL)
bSizerButtons.Add(self.btnSecStatus, 0, wx.ALL, 5)
bSizerButtons.AddStretchSpacer()
importExport = (("Import", wx.ART_FILE_OPEN, "from"),
("Export", wx.ART_FILE_SAVE_AS, "to"))
for name, art, direction in importExport:
bitmap = wx.ArtProvider.GetBitmap(art, wx.ART_BUTTON)
btn = wx.BitmapButton(self, wx.ID_ANY, bitmap)
btn.SetMinSize(btn.GetSize())
btn.SetMaxSize(btn.GetSize())
btn.Layout()
setattr(self, "{}Btn".format(name.lower()), btn)
btn.Enable(True)
btn.SetToolTip("%s skills %s clipboard" % (name, direction))
bSizerButtons.Add(
btn, 0, wx.ALIGN_CENTER_HORIZONTAL | wx.ALIGN_RIGHT | wx.ALL,
5)
btn.Bind(wx.EVT_BUTTON,
getattr(self, "{}Skills".format(name.lower())))
pmainSizer.Add(bSizerButtons, 0, wx.EXPAND, 5)
# bind the Character selection event
self.charEditor.entityEditor.Bind(wx.EVT_CHOICE, self.charChanged)
self.charEditor.Bind(GE.CHAR_LIST_UPDATED, self.populateSkillTree)
# Context menu stuff
self.idUnlearned = wx.NewId()
self.levelIds = {}
self.idLevels = {}
self.levelIds[self.idUnlearned] = "Not learned"
for level in range(6):
id = wx.NewId()
self.levelIds[id] = level
self.idLevels[level] = id
self.revertID = wx.NewId()
self.saveID = wx.NewId()
self.SetSizer(pmainSizer)
def __init__(self):
wx.Frame.__init__(self,
None,
-1,
'wxutil demo',
style=wx.DEFAULT_FRAME_STYLE | wx.RESIZE_BORDER
| wx.TAB_TRAVERSAL)
self.SetTitle('wxutil demo')
self.SetFont(Font(11))
self.set_menu()
self.statusbar = self.CreateStatusBar(2, 1)
self.statusbar.SetStatusWidths([-2, -1])
statusbar_fields = ['Initializing....', ' ']
for i in range(len(statusbar_fields)):
self.statusbar.SetStatusText(statusbar_fields[i], i)
self.Bind(wx.EVT_CLOSE, self.onExit)
panel = GridPanel(self, nrows=8, ncols=4)
tctrl_name = TextCtrl(panel,
value='',
action=self.onName,
size=(250, -1))
lctrl_addr = LabeledTextCtrl(self,
value='<>',
action=self.onAddr,
labeltext=' Address: ',
size=(250, -1))
lab3 = HyperText(panel,
' FloatCtrl: ',
size=(100, -1),
action=self.onHyperText)
val3 = FloatCtrl(panel,
'3',
action=self.onFloat1,
precision=2,
minval=0,
maxval=1000,
size=(250, -1))
lab4 = HyperText(panel,
' FloatSpin: ',
size=(100, -1),
action=self.onHyperText)
val4 = FloatSpin(panel,
'12.2',
action=self.onFloatSpin,
digits=2,
increment=0.1,
size=(250, -1))
labx = HyperText(panel,
' NumericCombo: ',
size=(100, -1),
action=self.onHyperText)
steps = make_steps(prec=1, tmin=0, tmax=100)
valx = NumericCombo(panel, steps, precision=1)
self.choice1 = Choice(panel, size=(200, -1), action=self.onChoice)
self.choice1.SetChoices(['Apple', 'Banana', 'Cherry'])
yesno = YesNo(panel)
check1 = Check(panel, label='enable? ', action=self.onCheck)
btn1 = Button(panel,
label='Start',
size=(100, -1),
action=self.onStart)
pinbtn = BitmapButton(panel,
get_icon('pin'),
size=(50, -1),
action=partial(self.onBMButton, opt='pin1'),
tooltip='use last point selected from plot')
togbtn = ToggleButton(panel,
'Press Me',
action=self.onToggleButton,
size=(100, -1),
tooltip='do it, do it now, you will like it')
browse_btn = Button(panel,
'Open File',
action=self.onFileOpen,
size=(150, -1))
okcancel = OkCancel(panel, onOK=self.onOK, onCancel=self.onCancel)
ptable_btn = Button(panel,
'Show Periodic Table',
action=self.onPTable,
size=(175, -1))
edlist_btn = Button(panel,
'Show Editable Listbox',
action=self.onEdList,
size=(175, -1))
filelist_btn = Button(panel,
'Show File CheckList',
action=self.onFileList,
size=(175, -1))
panel.AddText(' Name: ', style=LEFT)
panel.Add(tctrl_name, dcol=2)
panel.Add(lctrl_addr.label, newrow=True)
panel.Add(lctrl_addr, dcol=2)
panel.Add(lab3, newrow=True)
panel.Add(val3, dcol=3)
panel.Add(lab4, newrow=True)
panel.Add(val4, dcol=3)
panel.Add(labx, newrow=True)
panel.Add(valx, dcol=3)
panel.AddText(' Choice : ', newrow=True)
panel.Add(check1)
panel.Add(self.choice1)
panel.AddText(' Yes or No: ', newrow=True)
panel.Add(yesno)
panel.Add(HLine(panel, size=(500, -1)), dcol=3, newrow=True)
panel.Add(btn1, newrow=True)
panel.Add(pinbtn)
panel.Add(togbtn)
panel.Add(browse_btn, newrow=True)
panel.Add(ptable_btn)
panel.Add(edlist_btn, newrow=True)
panel.Add(filelist_btn)
panel.Add(okcancel, newrow=True)
panel.pack()
self.timer = wx.Timer(self)
self.last_time = time.time()
self.Bind(wx.EVT_TIMER, self.onTimer, self.timer)
fsizer = wx.BoxSizer(wx.VERTICAL)
fsizer.Add(panel, 0, LEFT | wx.EXPAND)
wx.CallAfter(self.init_timer)
psize = panel.GetBestSize()
self.SetSize((psize[0] + 5, psize[1] + 25))
pack(self, fsizer)
self.Refresh()
def __init__(self, parent, saver):
pi = 3.1415
self.start_flight_time = 0
wx.Frame.__init__(self, parent, -1, "Flight Recorder", size=(800, 600))
#tworzy "layout" programu
self.panel1 = wx.Panel(self,
-1,
style=wx.SUNKEN_BORDER,
size=(400, 300))
self.panel2 = wx.Panel(self,
-1,
style=wx.SUNKEN_BORDER,
pos=(400, 0),
size=(400, 300))
self.panel3 = wx.Panel(self,
-1,
style=wx.SUNKEN_BORDER,
pos=(0, 300),
size=(400, 300))
self.panel4 = wx.Panel(self,
-1,
style=wx.SUNKEN_BORDER,
pos=(400, 300),
size=(400, 300))
self.panel1.SetBackgroundColour("LIGHT GREY")
self.panel2.SetBackgroundColour("LIGHT GREY")
self.panel3.SetBackgroundColour("LIGHT GREY")
self.panel4.SetBackgroundColour("LIGHT GREY")
box = wx.BoxSizer(wx.VERTICAL)
box.Add(self.panel1, 2, wx.EXPAND)
box.Add(self.panel2, 1, wx.EXPAND)
#predkosciomierz
self.speed = SM.SpeedMeter(
self.panel2,
agwStyle=SM.SM_DRAW_HAND | SM.SM_DRAW_SECTORS
| SM.SM_DRAW_MIDDLE_TEXT | SM.SM_DRAW_SECONDARY_TICKS,
pos=(0, 30),
size=(400, 300))
# Set The Region Of Existence Of SpeedMeter (Always In Radians!!!!)
self.speed.SetAngleRange(-pi / 6, 7 * pi / 6)
# Create The Intervals That Will Divide Our SpeedMeter In Sectors
intervals = range(0, 901, 50)
self.speed.SetIntervals(intervals)
# Assign The Same Colours To All Sectors (We Simulate A Car Control For Speed)
# Usually This Is Black
colours = [wx.BLACK] * 18
self.speed.SetIntervalColours(colours)
# Assign The Ticks: Here They Are Simply The String Equivalent Of The Intervals
ticks = [str(interval) for interval in intervals]
self.speed.SetTicks(ticks)
# Set The Ticks/Tick Markers Colour
self.speed.SetTicksColour(wx.WHITE)
# We Want To Draw 5 Secondary Ticks Between The Principal Ticks
self.speed.SetNumberOfSecondaryTicks(5)
# Set The Font For The Ticks Markers
self.speed.SetTicksFont(wx.Font(7, wx.SWISS, wx.NORMAL, wx.NORMAL))
# Set The Text In The Center Of SpeedMeter
self.speed.SetMiddleText("Km/h")
# Assign The Colour To The Center Text
self.speed.SetMiddleTextColour(wx.WHITE)
# Assign A Font To The Center Text
self.speed.SetMiddleTextFont(wx.Font(8, wx.SWISS, wx.NORMAL, wx.BOLD))
# Set The Colour For The Hand Indicator
self.speed.SetHandColour(wx.Colour(255, 50, 0))
# Do Not Draw The External (Container) Arc. Drawing The External Arc May
# Sometimes Create Uglier Controls. Try To Comment This Line And See It
# For Yourself!
self.speed.DrawExternalArc(False)
# Set The Current Value For The SpeedMeter
self.speed.SetSpeedValue(1)
#wysokosciomierz
self.alt = SM.SpeedMeter(self.panel3,
agwStyle=SM.SM_DRAW_HAND | SM.SM_DRAW_SECTORS
| SM.SM_DRAW_MIDDLE_TEXT
| SM.SM_DRAW_SECONDARY_TICKS,
pos=(0, 0),
size=(350, 250))
# Set The Region Of Existence Of SpeedMeter (Always In Radians!!!!)
self.alt.SetAngleRange(-pi, pi)
# Create The Intervals That Will Divide Our SpeedMeter In Sectors
intervals = range(0, 11, 1)
self.alt.SetIntervals(intervals)
# Assign The Same Colours To All Sectors (We Simulate A Car Control For Speed)
# Usually This Is Black
colours = [wx.BLACK] * 10
self.alt.SetIntervalColours(colours)
# Assign The Ticks: Here They Are Simply The String Equivalent Of The Intervals
ticks = [str(interval) for interval in intervals]
self.alt.SetTicks(ticks)
# Set The Ticks/Tick Markers Colour
self.alt.SetTicksColour(wx.WHITE)
# We Want To Draw 5 Secondary Ticks Between The Principal Ticks
self.alt.SetNumberOfSecondaryTicks(5)
# Set The Font For The Ticks Markers
self.alt.SetTicksFont(wx.Font(7, wx.SWISS, wx.NORMAL, wx.NORMAL))
# Set The Text In The Center Of SpeedMeter
self.alt.SetMiddleText("0")
# Assign The Colour To The Center Text
self.alt.SetMiddleTextColour(wx.WHITE)
# Assign A Font To The Center Text
self.alt.SetMiddleTextFont(wx.Font(10, wx.SWISS, wx.NORMAL, wx.BOLD))
# Set The Colour For The Hand Indicator
self.alt.SetHandColour(wx.Colour(255, 255, 0))
# Do Not Draw The External (Container) Arc. Drawing The External Arc May
# Sometimes Create Uglier Controls. Try To Comment This Line And See It
# For Yourself!
self.alt.DrawExternalArc(False)
# Set The Current Value For The SpeedMeter
self.alt.SetSpeedValue(0)
#kompass
self.com = SM.SpeedMeter(self.panel4,
agwStyle=SM.SM_DRAW_HAND | SM.SM_DRAW_SECTORS
| SM.SM_DRAW_MIDDLE_TEXT
| SM.SM_DRAW_SECONDARY_TICKS,
pos=(0, 0),
size=(350, 250))
# Set The Region Of Existence Of SpeedMeter (Always In Radians!!!!)
self.com.SetAngleRange(-pi, pi)
# Create The Intervals That Will Divide Our SpeedMeter In Sectors
intervals = range(0, 9, 1)
self.com.SetIntervals(intervals)
# Assign The Same Colours To All Sectors (We Simulate A Car Control For Speed)
# Usually This Is Black
colours = [wx.BLACK] * 8
self.com.SetIntervalColours(colours)
# Assign The Ticks: Here They Are Simply The String Equivalent Of The Intervals
ticks = ["W", "WS", "N", "NE", "E", "EW", "S", "SN", ""]
self.com.SetTicks(ticks)
# Set The Ticks/Tick Markers Colour
self.com.SetTicksColour(wx.GREEN)
# We Want To Draw 5 Secondary Ticks Between The Principal Ticks
self.com.SetNumberOfSecondaryTicks(2)
# Set The Font For The Ticks Markers
self.com.SetTicksFont(wx.Font(7, wx.SWISS, wx.NORMAL, wx.NORMAL))
# Set The Text In The Center Of SpeedMeter
self.com.SetMiddleText("")
# Assign The Colour To The Center Text
self.com.SetMiddleTextColour(wx.WHITE)
# Assign A Font To The Center Text
self.com.SetMiddleTextFont(wx.Font(10, wx.SWISS, wx.NORMAL, wx.BOLD))
# Set The Colour For The Hand Indicator
self.com.SetHandColour(wx.Colour(255, 0, 0))
# Do Not Draw The External (Container) Arc. Drawing The External Arc May
# Sometimes Create Uglier Controls. Try To Comment This Line And See It
# For Yourself!
self.com.DrawExternalArc(False)
# Set The Current Value For The SpeedMeter
self.com.SetSpeedValue(2)
#zegar led pokazujacy czas lotu
self.led = gizmos.LEDNumberCtrl(self.panel1,
-1,
pos=(10, 30),
size=(350, 80),
style=gizmos.LED_ALIGN_LEFT)
# default colours are green on black
self.led.SetBackgroundColour("black")
self.led.SetForegroundColour("yellow")
#self.on_timer(None)
self.timer = wx.Timer(self, -1)
# update clock digits every second (1000ms)
self.timer.Start(1000)
MyFrame.start_flight(self, time.time())
self.Bind(wx.EVT_TIMER, self.since_start)
#wywolanie obiektu plane i wystartowanie jako watku, czyli wlaczenie symulatoa
self.plane = Plane(self, saver)
self.plane.start()
def __init__(self,
parent=None,
id=wx.ID_ANY,
h5in=None,
eiger_host="192.168.163.204",
eiger_api_ver="1.6.1",
bl="BL32XU",
monitor_interval=5.):
wx.Frame.__init__(self,
parent=parent,
id=id,
title="Adxv launcher for Eiger",
size=(540, 500))
self.h5file = None
self._lstTrigger_frame_request_workaround = None # dirty workaround..
if h5in:
if os.path.isdir(h5in):
h5files = filter(
lambda x: x.endswith(("_master.h5", "_onlyhits.h5")),
sorted(glob.glob(os.path.join(h5in, "*.h5"))))
if h5files: self.set_h5file(h5files[0])
else:
self.set_h5file(h5in)
self.onlyhits_keys = []
self.n_images = -1
self.n_images_each = -1
self.adxv = adxv.Adxv()
self.last_monitor_image = None
self.bl = bl
vbox = wx.BoxSizer(wx.VERTICAL)
notebook = wx.Notebook(self, wx.ID_ANY)
panel1 = wx.Panel(notebook, wx.ID_ANY)
panel2 = wx.Panel(notebook, wx.ID_ANY)
# panel1
vbox0 = wx.BoxSizer(wx.VERTICAL)
hbox00 = wx.BoxSizer(wx.HORIZONTAL)
hbox00.Add(wx.StaticText(panel1, wx.ID_ANY, "File: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.cmbInfile = wx.ComboBox(panel1, wx.ID_ANY, size=(350, 25))
self.cmbInfile.Bind(wx.EVT_COMBOBOX, self.cmbInfile_onChange)
self.cmbInfile.Bind(wx.EVT_TEXT_ENTER, self.cmbInfile_onChange)
hbox00.Add(self.cmbInfile, 1, flag=wx.EXPAND | wx.RIGHT)
self.btnInfile = wx.Button(panel1, wx.ID_ANY, "...", size=(25, 25))
self.btnInfile.Bind(wx.EVT_BUTTON, self.btnInfile_click)
self.btnLatest = wx.Button(panel1, wx.ID_ANY, "Latest", size=(50, 25))
self.btnLatest.Bind(wx.EVT_BUTTON, self.btnLatest_click)
hbox00.Add(self.btnInfile)
hbox00.Add(self.btnLatest)
vbox0.Add(hbox00, flag=wx.EXPAND | wx.TOP, border=4)
hbox01 = wx.BoxSizer(wx.HORIZONTAL)
vbox0.Add(hbox01, flag=wx.EXPAND | wx.TOP, border=4)
self.lstTrigger = wx.ListCtrl(panel1,
size=(180, 200),
style=wx.LC_REPORT | wx.LC_SINGLE_SEL)
self.lstTrigger.Bind(wx.EVT_LIST_ITEM_SELECTED,
self.lstTrigger_onSelected)
hbox01.Add(self.lstTrigger)
vbox012 = wx.BoxSizer(wx.VERTICAL)
hbox01.Add(vbox012, flag=wx.EXPAND | wx.LEFT, border=4)
hbox0121 = wx.BoxSizer(wx.HORIZONTAL)
vbox012.Add(hbox0121, flag=wx.EXPAND)
self.spnFrame = wx.SpinCtrlDouble(panel1,
wx.ID_ANY,
size=(100, 25),
min=1)
self.spnFrame.SetDigits(
0) # this is integer actually. but I want arbitrary increments
#self.sliFrame = wx.Slider(panel1)
self.spnFrame.Bind(wx.EVT_SPINCTRLDOUBLE, self.onTextEnter)
self.stFrameRange = wx.StaticText(panel1, wx.ID_ANY, "")
hbox0121.Add(wx.StaticText(panel1, wx.ID_ANY, "Frame no: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
hbox0121.Add(self.spnFrame) #, flag=wx.EXPAND|wx.RIGHT)
hbox0121.Add(self.stFrameRange,
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
#hbox0121.Add(self.sliFrame, 1, flag=wx.EXPAND|wx.RIGHT)
self.stShowing = wx.StaticText(panel1, wx.ID_ANY, "Nothing shown")
vbox012.Add(self.stShowing, flag=wx.TOP, border=4)
hbox0122 = wx.BoxSizer(wx.HORIZONTAL)
vbox012.Add(hbox0122, flag=wx.TOP, border=4)
self.chkSum = wx.CheckBox(panel1, label="Sum")
self.chkSum.Bind(wx.EVT_CHECKBOX, self.chkSum_onChecked)
self.spnSumFrame = wx.SpinCtrl(panel1, size=(80, 25))
self.spnSumFrame.Bind(wx.EVT_SPINCTRL, self.onSpnSumFrame)
self.spnSumDeg = wx.SpinCtrlDouble(panel1, size=(80, 25))
self.spnSumDeg.Bind(wx.EVT_SPINCTRLDOUBLE, self.onSpnSumDeg)
self.spnSumDeg.SetDigits(4)
hbox0122.Add(self.chkSum)
hbox0122.Add(self.spnSumFrame)
hbox0122.Add(wx.StaticText(panel1, wx.ID_ANY, " frames or "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
hbox0122.Add(self.spnSumDeg)
hbox0122.Add(wx.StaticText(panel1, wx.ID_ANY, " degrees"),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.chkKeepFrame = wx.CheckBox(
panel1, label="Keep frame number when trigger changed")
vbox012.Add(self.chkKeepFrame, flag=wx.TOP, border=4)
hbox0123 = wx.BoxSizer(wx.HORIZONTAL)
vbox012.Add(hbox0123, flag=wx.TOP, border=4)
self.llbtn = wx.Button(panel1, wx.ID_ANY, "<<")
self.lbtn = wx.Button(panel1, wx.ID_ANY, "<")
self.rbtn = wx.Button(panel1, wx.ID_ANY, ">")
self.rrbtn = wx.Button(panel1, wx.ID_ANY, ">>")
hbox0123.Add(self.llbtn, flag=wx.EXPAND | wx.RIGHT)
hbox0123.Add(self.lbtn, flag=wx.EXPAND | wx.RIGHT)
hbox0123.Add(self.rbtn, flag=wx.EXPAND | wx.RIGHT)
hbox0123.Add(self.rrbtn, flag=wx.EXPAND | wx.RIGHT)
self.lbtn.Bind(wx.EVT_BUTTON, lambda e: self.next_or_back(-1))
self.rbtn.Bind(wx.EVT_BUTTON, lambda e: self.next_or_back(+1))
self.llbtn.Bind(wx.EVT_BUTTON, lambda e: self.play(-1))
self.rrbtn.Bind(wx.EVT_BUTTON, lambda e: self.play(+1))
hbox0124 = wx.BoxSizer(wx.HORIZONTAL)
vbox012.Add(hbox0124, flag=wx.TOP, border=4)
hbox0124.Add(wx.StaticText(panel1, wx.ID_ANY, "Binning: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.txtBin = wx.TextCtrl(panel1,
wx.ID_ANY,
size=(100, 25),
style=wx.TE_PROCESS_ENTER)
self.txtBin.SetValue("1")
self.txtBin.Bind(wx.EVT_TEXT_ENTER, self.onTextEnter)
hbox0124.Add(self.txtBin, flag=wx.EXPAND | wx.RIGHT)
panel1.SetSizer(vbox0)
notebook.InsertPage(0, panel1, "File")
# panel2
vbox1 = wx.BoxSizer(wx.VERTICAL)
#hbox10 = wx.BoxSizer(wx.HORIZONTAL)
#hbox10.Add(wx.StaticText(panel2, wx.ID_ANY, "Wavelength: "), flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL)
#self.txtMonWavelen = wx.TextCtrl(panel2, wx.ID_ANY, size=(100,25))
#self.txtMonWavelen.SetValue("1.0000")
#hbox10.Add(self.txtMonWavelen, flag=wx.EXPAND|wx.RIGHT)
#hbox10.Add(wx.StaticText(panel2, wx.ID_ANY, " Distance: "), flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL)
#self.txtMonDistance = wx.TextCtrl(panel2, wx.ID_ANY, size=(100,25))
#self.txtMonDistance.SetValue("300.0")
#hbox10.Add(self.txtMonDistance, flag=wx.EXPAND|wx.RIGHT)
#vbox1.Add(hbox10, flag=wx.EXPAND|wx.TOP, border=4)
hbox11 = wx.BoxSizer(wx.HORIZONTAL)
#hbox11.Add(wx.StaticText(panel2, wx.ID_ANY, "Beam center: "), flag=wx.LEFT|wx.ALIGN_CENTER_VERTICAL)
#self.txtMonBeamxy = wx.TextCtrl(panel2, wx.ID_ANY, size=(150,25))
#self.txtMonBeamxy.SetValue("1550, 1634.5")
#hbox11.Add(self.txtMonBeamxy, flag=wx.EXPAND|wx.RIGHT)
self.btnMonRefresh = wx.Button(panel2, wx.ID_ANY, "Start monitoring")
self.btnMonRefresh.Bind(wx.EVT_BUTTON, self.on_btnMonRefresh)
self.btnMonStop = wx.Button(panel2, wx.ID_ANY, "Stop")
self.btnMonStop.Bind(wx.EVT_BUTTON,
lambda e: self.monitor_timer.Stop())
self.txtMonInterval = wx.TextCtrl(panel2,
wx.ID_ANY,
"%.1f" % monitor_interval,
size=(50, 25))
hbox11.Add(self.btnMonRefresh, flag=wx.EXPAND | wx.RIGHT)
hbox11.Add(self.btnMonStop, flag=wx.EXPAND | wx.RIGHT)
hbox11.Add(wx.StaticText(panel2, wx.ID_ANY, " interval: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
hbox11.Add(self.txtMonInterval, flag=wx.EXPAND | wx.RIGHT)
hbox11.Add(wx.StaticText(panel2, wx.ID_ANY, " sec."),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
vbox1.Add(hbox11, flag=wx.EXPAND | wx.TOP, border=4)
hbox12 = wx.BoxSizer(wx.HORIZONTAL)
self.chkMonRaiseW = wx.CheckBox(panel2, wx.ID_ANY,
"Raise adxv windows")
self.chkMonRaiseW.SetValue(1)
hbox12.Add(self.chkMonRaiseW, flag=wx.EXPAND | wx.RIGHT)
vbox1.Add(hbox12, flag=wx.EXPAND | wx.TOP, border=4)
hbox13 = wx.BoxSizer(wx.HORIZONTAL)
hbox13.Add(wx.StaticText(panel2, wx.ID_ANY, "Eiger DCU host: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.txtEigerHost = wx.TextCtrl(panel2,
wx.ID_ANY,
eiger_host,
size=(150, 25))
hbox13.Add(self.txtEigerHost)
hbox13.Add(wx.StaticText(panel2, wx.ID_ANY, " API ver.: "),
flag=wx.LEFT | wx.ALIGN_CENTER_VERTICAL)
self.txtEigerAPIver = wx.TextCtrl(panel2,
wx.ID_ANY,
eiger_api_ver,
size=(100, 25))
hbox13.Add(self.txtEigerAPIver)
vbox1.Add(hbox13, flag=wx.EXPAND | wx.TOP, border=4)
panel2.SetSizer(vbox1)
notebook.InsertPage(1, panel2, "Monitor")
notebook.Bind(wx.EVT_NOTEBOOK_PAGE_CHANGED,
self.on_notebook_page_changed)
vbox.Add(notebook, flag=wx.EXPAND)
self.txtInfo = wx.TextCtrl(self, wx.ID_ANY, style=wx.TE_MULTILINE)
self.txtInfo.SetFont(wx.Font(12, wx.MODERN, wx.NORMAL, wx.NORMAL))
self.txtInfo.SetEditable(False)
vbox.Add(self.txtInfo, 1, flag=wx.EXPAND, border=4)
self.SetSizer(vbox)
self.play_timer = wx.Timer(self)
self.play_relval = 0
self.Bind(wx.EVT_TIMER, self.on_play_timer, self.play_timer)
self.monitor_timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.on_monitor_timer, self.monitor_timer)
self.Show()
if self.h5file is not None:
self.read_h5file()
